In order to flash the EH17 modem from Cyanogen with the EI22 modem can I just flash EH17 through ODIN, or do I need to return to a stock build, update the modem to EH17, then return to Cyanogen?
Background:
I was on EH17 on BML Cyanogen. I flashed EC05 through ODIN, then ran the EC05 -> EI22 delta through Clockwork. After getting EI22 I went to the MTD version of Cyanogen, and currently have a build with WiMAX installed. My battery life has dropped by 4-6 hours since making these changes, and in my office (a very low service area) I've been having a lot more service issues. My instincts tell me to just update the modem because it's probably exists outside of the BML/MTD world, but I do like my phone working.
Thanks for the help!
soundman1024 said:
In order to flash the EH17 modem from Cyanogen with the EI22 modem can I just flash EH17 through ODIN, or do I need to return to a stock build, update the modem to EH17, then return to Cyanogen?
Background:
I was on EH17 on BML Cyanogen. I flashed EC05 through ODIN, then ran the EC05 -> EI22 delta through Clockwork. After getting EI22 I went to the MTD version of Cyanogen, and currently have a build with WiMAX installed. My battery life has dropped by 4-6 hours since making these changes, and in my office (a very low service area) I've been having a lot more service issues. My instincts tell me to just update the modem because it's probably exists outside of the BML/MTD world, but I do like my phone working.
Thanks for the help!
Click to expand...
Click to collapse
Yep just odin it in... odin still works on cm7 no need to downgrade unless trying to get to ei22 because you can't flash the ei22 delta with cwm on cm7mtd...
Sent from my SPH-D700 using Tapatalk
Sounds great. Thanks for the help!
soundman1024 said:
Sounds great. Thanks for the help!
Click to expand...
Click to collapse
Not a problem
Related
Hi all,
I'm currently running SyndicateROM DI18 and have held off on flashing new ROMs until SyndicateROM Frozen came out. It's now out, and I'm a little uneasy about the steps I need to go through to install it. Could somebody outline all the steps that I need to take to go from DI18 Syndicate to EC05 SyndicateFrozen?? I have an idea as to what I need to do, but I want to be completely sure of what I'm doing before I do it.
Thanks so much!
I'd also like to thank all the developers that have worked so hard to make our phones awesome!
you can do it a couple of different ways. you can odin to di18 stock and accept the ota for ec05. you can also odin to eb13 and then odin the modem to ec05. some people are having better luck going from eb13 than ec05. either way you take run the one click root for eb13 with cwm3. boot into cwm and once the conversion is complete flash the rom before you reboot.
musclehead84 said:
either way you take run the one click root for eb13 with cwm3. boot into cwm and once the conversion is complete flash the rom before you reboot.
Click to expand...
Click to collapse
+1 and you should definately upgrade to the new rom as it is great even though some users are having some issues with it but nothing really major.
Ended up Odin ing to EB13 that was pre-rooted with CWM3, then flashed the EC05 Modem and then flashed the SyndicateFrozen ROM. Everything works perfectly, and boy is it fast!
Thanks for the help!
Roly.Poly said:
Ended up Odin ing to EB13 that was pre-rooted with CWM3, then flashed the EC05 Modem and then flashed the SyndicateFrozen ROM. Everything works perfectly, and boy is it fast!
Thanks for the help!
Click to expand...
Click to collapse
No problem I'm glad you got it working. It is a nice rom.
Sent From My Evo Killer!
I want to flash the EC05 rom. I found one that is prerooted and can be flashed using odin but it is RFS only. However, the phone was previously flashed with cm3 and converted to ext4. If I flash it using the method here http://forum.xda-developers.com/showthread.php?t=853209 with CM 2.5 can I then flash up to the EC05 using odin? Or is there no way to go back to RFS? I am very new to doing things with the epic and I have been looking around for a stock EC05 that supports ext4 that I could just flash from the CM 3 recovery but haven't found one yet.
Odin does not care what is currently on your phone. If you flash the Pre-rooted EC05, it will overwrite what is currently on your phone.
That is what I thought but I wasn't sure. I think I have pretty much convinced my brother to just let me flash it with a custom EC05 rom that supports CM3 such as syndicate or midnight.
Let us know how it goes, I have seen quite a few customers who did the EC05 OTA really screw up their devices, radio dropping and power cycling quite a bit.
ONE OF THEM HERE! ! ! the EC05 ota update turn my phone into a slow waste of technology! Fortunte really because it made me root and flash ROMs.
in regards to the pre-rooted EC05.... i have yet to add this to my arsenal... if anyone has a link handy id appreciate it.
just flashed back to DK28 for the Ironman ROM......would recommend, all i can say is whoa! ! !
Ok so I apologize for my ignorance here but seeing as I have an EVO I'm not really used to the process of manually updating the epic for my wife...anyways a while ago I manually flashed the dk28 update on her phone since it wasn't official and she wanted A2SD ability...so now I see all these new builds so now I have just a few questions:
1. What is a good build or version to flash on her phone?
2. Can I flash from dk28 without having to Odin and wipe everything?
3. Do I have to root? (I don't really care but my wife is worried about voiding her contract and blah blah blah )
Any help and insight would be great...and if any of these questions are stupid please go easy on me haha
Sent from my nightly EVO
just odin to di18 it ota if you don't want to root.
otherwise just wait for cm7
You don't want dk28. Go in dev section find the prerooted ec05 by far the best and id suggest flashing acs syndicate rom its by far the best no issues .
For any custom ROM or kernel you have to have root. So if she wants to stay stock then you will need to Odin to DI18 or EB13 and OTA. There is only one stock tar file for EC05. It is probably in the ACS section of development since K0nane released it.
kennyglass123 said:
For any custom ROM or kernel you have to have root. So if she wants to stay stock then you will need to Odin to DI18 or EB13 and OTA.
Click to expand...
Click to collapse
Incorrect. The EC05 stock TAR is fully stock. 100% unmodified full stock.
http://k0nane.info/rom/SPH-D700-EC05-8gb-REL.tar
k0nane said:
Incorrect. The EC05 stock TAR is fully stock. 100% unmodified full stock.
http://k0nane.info/rom/SPH-D700-EC05-8gb-REL.tar
Click to expand...
Click to collapse
You cut off my last sentence which mentioned your 100% stock EC05 tar. BTW it would be real helpful if you got it stickied or add it to the OP of your ROM. Thanks big guy.
Do you BONSAI?
I am in the same boat. I was able to upgrade to DK28 when it was originally leaked months ago but I have a new pc without any of the drivers or tools needed so I need a good basics tutorial on how to flash.
I have DK28 and I am hoping I can update without losing anything.
I want the latest, stable.
Should I do EC05, Bonsai or Syndicate? I am rooted.
I am loooking for functionality and simplicity rather than bells and whistles.
Thanks.
I have flashed to ShadowKernel for EI22 and just recently recieved the OTA update for EL30 its rebooted and crashed in the process.
I am just curious if I wanted to update to EL30 will I need to flash my phone back to stock or is there another process I can take in updating?
-alex
You will need to Odin the el30 tar.
Sent from my SPH-D700 using Tapatalk
Thanks for the info, that help narrow my search down. Ill look for a writeup.
sh!ft said:
I have flashed to ShadowKernel for EI22 and just recently recieved the OTA update for EL30 its rebooted and crashed in the process.
I am just curious if I wanted to update to EL30 will I need to flash my phone back to stock or is there another process I can take in updating?
-alex
Click to expand...
Click to collapse
no, you won't have to re-odin, there is a tar file for el30 by toadlife
http://forum.xda-developers.com/showthread.php?t=1501424
Does it matter if I used CWM instead to flash ShadowKernel will I have to install Odin and do this instead.
sh!ft said:
Does it matter if I used CWM instead to flash ShadowKernel will I have to install Odin and do this instead.
Click to expand...
Click to collapse
you have to use odin to flash the el30 tar file. then you can try flashing through cwm the shadowkernel
I was running ACS SFR 1.2 for the longest time (about a year I think), and yesterday finally decided to update to CM9. I didn't realize it wouldn't update my baseband at the same time (previous roms always did).
I do have CWM 5.0.2.7 installed, and also have successfully used the multiboot FC09 to update my profile and PRL, however, I realized my baseband in CM9 is still EG22.
Is there a way to update the baseband without having to use Odin and losing my CM9 setup? I guess it's not a huge deal to re-set up everything... but I'm a little pissed that Mybackup root wouldn't let me restore my stuff from the backup I made before updating.... so I had to re-install everything from scratch.
I did see a reference to uprgrade.zip, usable from CWM9, but it seems like you had to be on EL30 or something 1st (diff patch?).
Why not just odin the modem (not a full tar, just the modem itself)? It won't touch the rest of your setup.
Yes use odin to flash just the modem you won't touch your rom setup. Search youtube for qbking77 and find his how to video on updating modems. Takes maybe 4 min.
Sent from My Epic Ice Cream Sandwich With Sprinkles!!!
Ok, I was just confused because everything said I'd have to repartition if I used Odin.
Just leary because the last time I Odin'd I damn near bricked my phone...
Anyway... grabbed the FC09 modem.bin, Odin 1.85, Samsung drivers, installed everything on my work PC...
Powered down phone, plugged in... let windows auto update the drivers for the ports ... Booted into download mode (1 + power). Once the com port showed up, I put the modem.bin in the phone slot of Odin ... hit start ... about a minute later... phone rebooted and I now have FC09
Thanks!
Only very few ROMs that did a very specific check could update modems. This was done by using the delta modem provided in the update zip. So you HAD to be on EB13 modem to have the ROM update you to EC05 and that was the only situation supported. There is no way to flash a full modem.bin on the Epic without Heimdall or Odin. There are flashable deltas from EI22 to EL30 and another from EL30 to FC09 but you will need to flash them with the BML CWM temp boot from sd card.
Sent from my PantechP4100 using xda premium
kennyglass123 said:
Only very few ROMs that did a very specific check could update modems. This was done by using the delta modem provided in the update zip. So you HAD to be on EB13 modem to have the ROM update you to EC05 and that was the only situation supported. There is no way to flash a full modem.bin on the Epic without Heimdall or Odin. There are flashable deltas from EI22 to EL30 and another from EL30 to FC09 but you will need to flash them with the BML CWM temp boot from sd card.
Sent from my PantechP4100 using xda premium
Click to expand...
Click to collapse
To OP: Below is a download link for all modems from EC05 to FC09, including deltas. Each phone performs differently depending on modem version, so try them out and see which one works best for you.
http://www24.zippyshare.com/v/12386757/file.html
Enjoy.