unable to install chainfire drivers on Calks 2.8 - Samsung Epic 4G Touch

anyone have this problem? I get stuck on boot logo screen every time. restore is only way to get it to boot. It seems to install fine with other el29 roms.. I tried only installing the cf3d driver only without the egl and still no go. blah, this is really sucky.
never had this problem with any of Calks roms.
fixes or condolences, anyone? ;p
Sent from my SPH-D710 using Tapatalk

Related

[Q] nebula rom messing up

so i rooted with one click
then went from dk17 to dk28 froyo
then i upgraded to cwm3
wiped 3 times
then install from zip (nebula rom)
phone boots up all the way but then resets
and it also flickers "android" on the galaxy s screen
also the phone will b on but the screen wont
plz help
p.s. screen wont come on when i hit the pwr button but it will work kind of when i slide the keybrd out
Well the.best thing you can.probably.do is Odin dk28. Then root and.try again. Something had to have happened in your flash.
Sent from my Evo Killer!!!
I just had this very same problem.. not sure exactly what fixed it, but once you install the rom install it agan. I believe that is what did it for me!
I that doesn't work try the different format options in CW.
Sent from my SPH-D700 using XDA App
Reflash the zip again. Don't need to restore or anything just flash it again and it should work.
Sent from my SPH-D700 using XDA App

Emergency (Can Only Install Odin Rom)

I had a rom, that restarted the phone on its own, and the launcher kept getting erased, so i installed another rom and it wouldnt work.I had to Odin, and then have tried to install about 6 diffrent roms, with none working. Either it will get stuck in a boot loop, or just the buttons would light up with no screen. Please Help me
Give us more information. What roms are you trying to install. Rfs or ext4. What cwm are you using?
Sent from my SPH-D700 using XDA App
damicrobe said:
Give us more information. What roms are you trying to install. Rfs or ext4. What cwm are you using?
Sent from my SPH-D700 using XDA App
Click to expand...
Click to collapse
You listed his issues he's probably flashing in wrong Cwm or with wrong build....
Odin the ECO5
THEN ROOT WITH THE ONE CLICK ROOT 3.0.2.5
THEN FLASH ACS FROZEN 1.1.1 (Best ROM Ever )
.... Thats it
thats exacly what i did. Frozen was the 1st rom..then i later went to the gingerbread leak (anoymous) and it was working but i kept losing data connection so i went back to urban fury...then it ramdomly would reboot with no launcher and i tried to reinstall, and ever since then all i can do is odin. i wonder if my root some how is messed up or something
I'm currently running acs's sfr 1.1.1. I Flashed it twice because I had a bad flash. But otherwise its running great. There's great vid's that show you step by step. It should be in sfr 1.1.1 first post in the dev section.
Sent from my SPH-D700 using XDA App
i got roms to install now, but if i uninstall anything using titanium backup, when i reboot, the phone just boot loops
benbenondatrack said:
i got roms to install now, but if i uninstall anything using titanium backup, when i reboot, the phone just boot loops
Click to expand...
Click to collapse
What are you uninstalling after you flash a ROM?
benbenondatrack said:
i got roms to install now, but if i uninstall anything using titanium backup, when i reboot, the phone just boot loops
Click to expand...
Click to collapse
What ROM?
And if its SRF did you download the version without the kernel included? Or the one with the kernel in it?
Could be bad downloads?
Try running CWM 3.0.0.6? I think is the previous version
I was having a ton of problems with 3.0.2.5 constant boot animation loop
couldn't get past any of the roms boot animations
I odin'd back to EC05, completely rerooted with the previous clockwork and it flashed good after the second time of course
had the double boot logo at first lol
if that doesnt work you could go into the bonsai recovery, I havent had any problems with that recovery at all

Capacitive buttons only work when keyboard is out

I've got an issue where all four capacitive buttons will not work in portrait mode but will work in landscape mode with the keyboard out. I've found some people had issues when they first got their phones but I've had mine for about 14 months and this just started happening. I'm on RandomRom right now with a fresh flash but I had this same Rom before I re-flashed and didn't have the issue. Also, the capacitive buttons used to work in CWM but they don't anymore. I'm going to try the new RandomRom later this weekend but I was curious if anyone else had this issue? I'm leaning towards a hardware problem even though it does work with the keyboard out but also the software has essentially remained unchanged so I'm lost.
Try a different kernel
sent from my touchwiz 4.5-ed epic
That was a kernel problem when the ei22 kernels first started being develpoed and has since been fixed. Flashing a newer kernel will take care of the problem
Sent from my SPH-D700 using Tapatalk
I flashed the 3.3 ThunderHawk ROM and re-flashed the Shadow Kernel (My device says 2.6.35.7-Shadow-EI22_v1.0.2+OC) but it persists. However it's reassuring that you both came up with the same solution; do you have a different kernel in mind that might work better? Thanks for your help.
I'm currently on iap's samurai.mtd.tw.warrior, you could try that if your on mtd. If not he has a bml version too
sent from my touchwiz 4.5-ed epic
Go into cwm, wipe data 3x, cache 3x, and dalvik cache 3x. then try installing cleangb rom and shadowkernel. See what results u get.
Sent from my SPH-D700 using xda premium
FaithOmitted said:
I flashed the 3.3 ThunderHawk ROM and re-flashed the Shadow Kernel (My device says 2.6.35.7-Shadow-EI22_v1.0.2+OC) but it persists. However it's reassuring that you both came up with the same solution; do you have a different kernel in mind that might work better? Thanks for your help.
Click to expand...
Click to collapse
I recommmend doing a clean install of whatever rom you want to use. An updated kernel should be included with the rom. Wiping 3 times is not neccessary as that was a bug with old cwm (3.x.x.x) 1 time is enough now. If the problem persits after a clean install download the newest samurai kernel. If that doesn't work try the newest shadow kernel (you can try shadow first if you would rather that kernel). Shadow is now on 1.0.4....
Sent from my SPH-D700 using Tapatalk
androidmaster1 said:
Go into cwm, wipe data 3x, cache 3x, and dalvik cache 3x. then try installing cleangb rom and shadowkernel. See what results u get.
Sent from my SPH-D700 using xda premium
Click to expand...
Click to collapse
3 times is no longer neccessary as long as your on cwm 5.0.2.7... just throwing that out there...
Sent from my SPH-D700 using Tapatalk
Ugh...I flashed Samurai Kernel I believe. One of the ninja-esque titled kernles; no luck. I tried changing CWM to ACSRecovery 5; no luck. I tried flashing xBTx's "MostlyStock" ROM; no luck. I'll try the CleanGB ROM with both kernels now Also, I flash cache, Dalvik, and data 3x from habbit. Thanks again for your help
FaithOmitted said:
Ugh...I flashed Samurai Kernel I believe. One of the ninja-esque titled kernles; no luck. I tried changing CWM to ACSRecovery 5; no luck. I tried flashing xBTx's "MostlyStock" ROM; no luck. I'll try the CleanGB ROM with both kernels now Also, I flash cache, Dalvik, and data 3x from habbit. Thanks again for your help
Click to expand...
Click to collapse
if that doen't work... try this...it may work.. and i got this advice from kennyglass, it helped me alot. if you can reflash from odin, try repartitioning...that may fix it. "trial and error". that's what i would do. "but thats just me".
Okay I tried the CleanGB, with the stock kernel and Shadow kernel, and neither of those worked either! Does anyone know of a decent ROM to Odin? I don't want to download the stock from the Samsung website and have to re-root. Or, does anyone know of a gesture application that has "back" and "home" that can be mapped?
Besides "odin", u really got me there. If. U repartition...as much as u don't want to..it will completely reset everything. I would have to say, its better than continuining the guesing game...u know? That's my advice though.
Sent from my SPH-D700 using xda premium
androidmaster1 said:
if that doen't work... try this...it may work.. and i got this advice from kennyglass, it helped me alot. if you can reflash from odin, try repartitioning...that may fix it. "trial and error". that's what i would do. "but thats just me".
Click to expand...
Click to collapse
^^^^^^+1... if all else fails you probably have bad data converting over everywhere you go... odin the ec05.tar with the victory pit and make sure reboot and repartition is checked... then reroot and flash rom/kernel of your choosing and that should take care of your problem!
Sent from my SPH-D700 using Tapatalk
Would you recommend I just use this?
Flast, thanks for adding about pit file...forgot to add that in my reply.
Sent from my SPH-D700 using xda premium
FaithOmitted said:
Would you recommend I just use this?
Click to expand...
Click to collapse
Yep that's the one... if you have odin the victory pit should've been included with odin... put the ec05.tar in the pda slot and the pit in the pit... reboot and repartition checked and flash... then either root from there with the one click or accept update and root ei22... if you need help with the rerooting in anyway you can pm me... I'm always up till bout 5 or 6 in the morning cuz imma bit of an insomniac so anytime is fine and I will walk you through it as best as I can
Sent from my SPH-D700 using Tapatalk
I re-flashed through Odin 3 times but after each time my problem persisted. I followed the instructions exactly yet the reformat didn't change anything. I'm going to rip it apart tonight and re-seat everything and if that doesn't work I guess I have to live with it.

Clean GB MTD issues

Ive tried 3 times to switch to mtd heres my steps I must be doing something wrong please point it out for me.
Step 1: odin to deodexed/rooted ec05
Step 2: eco5 modem to ei22 converted
step 3: upgrade to newest cwm5
step 4: Wipe data/cache/delvik 3x
step 5: Install MTD Clean rom/ Also tried CM7
Outcome: first seems fine restarts back to cwm5 Im assuming that means its converted to mtd? (should i reflash rom after restart to cwm5?) Then I reboot system and the screen just stays black nothing happens waited forever forceing me to odin again and repeat the steps with no luck over and over again. I have also tried installing clean rom + a different MTD Kernal. Still just a black screen buttons lit up and no sign of life I waited nearly half an hour leaving the phone like this and nothing happened.
Odin is a pain it takes 5 failured to reodin I figured id ask the pros since i want MTD and need to figure this out. Please tell me im missing something obvious and make it a simple solution lol Thanks for your help.
When you flash an MTD ROM, the phone will restart during the flash and should reboot and continue to install. Once that is done it should say install successful in CWM. Is it doing that?
I install in cwm5 it shuts off reboots back to cwm5 and thats it at that point i find myself lost and reboot to system and get black screen. Do my steps look right nothing special i have read all comments and see no issues so i feel pretty slow because i never have these problems and couldnt find a similar one.
If it helps me explain better when i installed CM7 I got as far as the CM7 loading screen and then it froze. So I tried to wipe then install clean MTD to see if it would load either and got black screen right after CM7 logo......Ill try again in a minute I just want someones help first before I try again. Then i will post new info about my issue if it continues and we can figure out what im missing.
When you odin you says it fails? You need a better cable also you converted to mtd but it won't boot so when you go back to stock you need to repartition so have that checked. Also don't go back to stock rooted go back to official stock ec05 not anything but that please. Then once done flash in a custom recovery and flash the ei22 modem conversion and finally wipe data cache and dalvik *once* and flash the mtd rom. Then it will reboot almost half way through and then it should say install complete and it will reboot your system.
Sent From My Cyan Samurai
Ok im going again to try after reading your post ill edit this reply with my outcome after my attemp Im using my 4g for internet so it will take a few minutes to get back here to respond.
Ok ive tried it all nothing helps reflashed on MTD even still boots back to cw5.
I did however download from the xda app I seen some threads on this. Is it possible thats the reason? I usually download roms from it and they work fine but my 16gb is running low. Im going to try again from a laptop download then transfew to microsd on sd adapter and see. I tried it all how do i check md5?
Also i was trying to flash cm710 so im not sure if that has a issue but ill try not downloading from XDA app because im really tired of starting from scratch with this phone. sm7 i see boot logo and resets to cwm5 Clean MTD i see only black screen and it resets to cwm5.
I had to do a factory data reset right before flashing CM7 otherwise I also got stuck at the circle load thingie.
Sent from my SPH-D700 using XDA App
kennyglass123 said:
I had to do a factory data reset right before flashing CM7 otherwise I also got stuck at the circle load thingie.
Sent from my SPH-D700 using XDA App
Click to expand...
Click to collapse
That was going to be my next suggestion to wipe data cache and dalvik and reflash once on mtd.
Sent From My Cyan Samurai
JavaKid said:
Ok im going again to try after reading your post ill edit this reply with my outcome after my attemp Im using my 4g for internet so it will take a few minutes to get back here to respond.
Click to expand...
Click to collapse
Also you may have a bad doownload. Check the md5 on the rom and compare to your download...
Sent from my SPH-D700 using Tapatalk
Well I never solved the issues with mtd cm7 and clean rom..... But I did manage to get to MTD very easily using marcusant v3 rom then added red theme and all is well. So in short who knows what was up after trying everything but if anyone else has that issue.....give up lol I needed a lot of asprin getting through tht mess. marcusant v3 MTD is amazing with red theme its boss.
edit: Dont give up lol use dolphin browser and redownload worked like a charm I dont want to discourage anyone as I like to try every rom atleast once. Plus clean GB has stable wifi hack with 4g on.
Sent from my SPH-D700 using XDA App
JavaKid said:
Well I never solved the issues with mtd cm7 and clean rom..... But I did manage to get to MTD very easily using marcusant v3 rom then added red theme and all is well. So in short who knows what was up after trying everything but if anyone else has that issue.....give up lol I needed a lot of asprin getting through tht mess. marcusant v3 MTD is amazing with red theme its boss.
Sent from my SPH-D700 using XDA App
Click to expand...
Click to collapse
It was probably some bad downloads. If you want to try CM7 I only was able to get it to flash with a Factory Data reset prior to flashing it. You should grab one of the nightlies from 10 and up with the working 4G toggle.
Well i was dedicated to resolving this after realizing sleeperrom mtd and Marcusant MTD had broken wifi when 4g was enabled. So yeah i resolved the issue by downloading with dolphin browser mini worked like a charm for some reason that browser is the only reliable one for me to download roms. Switched to clean gb 4g wifi hotspot is perfect. Also if anyone knows if hotspot with 4g is broken in cm7 mtd what tether app with 4g tether will work with an epic?
JavaKid said:
Well i was dedicated to resolving this after realizing sleeperrom mtd and Marcusant MTD had broken wifi when 4g was enabled. So yeah i resolved the issue by downloading with dolphin browser mini worked like a charm for some reason that browser is the only reliable one for me to download roms. Switched to clean gb 4g wifi hotspot is perfect. Also if anyone knows if hotspot with 4g is broken in cm7 mtd what tether app with 4g tether will work with an epic?
Click to expand...
Click to collapse
Working copy of wireless tether for cm7 > http://db.tt/Q6n9nOge
Open and before you start the tether change the first two settings... 1. Change to epic 4g... 2. Change to softap... I use this on EVERY ROM I run... turn on 4g after the app starts up...
Sent from my SPH-D700 using Tapatalk
Wow your a life savor im definately trying that out today. For cm7 do you have to start fresh though or can you clear then flash over clean gb mtd? Your getting a thanks I have been up and down the market and nothing worked and no trials to see if certain programs work that cost 12 bucks a pop so this info is very valuable to me thanks.
Marcusantrom v3 fixed the 4g tethering
Sent from my SPH-D700 using XDA App

Major trouble swithing to CM9/AOKP

So I've been running ViperInc 1.2 for a while but wanted to switch back to CM9. I downloaded the Anti Venom wiper tool, cleared everything in recovery, flashed CM9, flashed gapps and fired it up. For a day or two everything ran fine. Then the s hit the fan. My phone basically froze. I basically froze because it still ran, but at less than a snail's pace. Even shutting down and rebooting wouldn't work. My phone would say "shutting down" and then hang. I had to pull the battery in order to restart. But then all I got was boot loops. Boot up, run like molasses for 2 minutes then reboot. So I tried a new CM9 flash, no luck...then I tried Condemned Soul's AOKP ROM, no luck with that. So now I'm back on ViperInc. No big deal it's a great ROM, but I think I prefer CM9. I've got the latest ICS radio.
Any thoughts what might be causing the CM9/AOKP issues
Thanks.
Has anyone ever tried to go from viper to cm7 then to cm9 ?
Sent from my Evervolved Vivow using Tapatalk 2
bsmitty83 said:
Has anyone ever tried to go from viper to cm7 then to cm9 ?
Sent from my Evervolved Vivow using Tapatalk 2
Click to expand...
Click to collapse
I did. After flashing cm7 successfully run the AntiVenomSDW, then go to cm9/10
Sent from my Incredible 2 using xda premium

Categories

Resources