Develop Bugs

OpenRUU for Linux & Mac - NEW! Extract rom.zip from any RUU! BETA2

OpenRUU - RUU Shell Script For Linux & Mac
This is a shell script to flash an official RUU from HTC.
You do not need root.
Prerequisites:
Wine - Only needed to extract a rom from an RUU.
The script will:
NEW! Extract a rom.zip from an RUU & works on any device!
Get your current ROM version
Get Your Current HBOOT Version
Get Your Battery %
Reboot into RUU Mode
Flash the ROM using fastboot or NEW! Flash the rom in HBOOT without a PC!
Reboot your phone
Enjoy!
DOWNLOADS:
RUU Exract Version (beta) http://forum.xda-developers.com/attachment.php?attachmentid=350639&stc=1&d=1277632079]
If you can, please donate so I can afford better hosting, I also have some cool features to implement when I get proper hosting too. (If you can host a rom.zip, please PM me.)
Donate - GBP
Donate - Euro
Donate - Dollars
Post here with any bugs/comments so my turkeys can get to work!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Reserved for q&a

Reserved #2

Nice job! Well done

With beta2 I have cleaned up the fastboot scripts alot & general cleaning up of the scripts.

Is this the method for unrooting the HTC and return to stock roms? Like it is done when executing the ruu.exe in windows.

You should add a prerequisites section.
Not everybody has wine installed be default.

adwinp said:
You should add a prerequisites section.
Not everybody has wine installed be default.
Click to expand...
Click to collapse
Done.
10char

Just one question quickly. Say I extract the rom.zip from one of the official 2.1 RUU's - will it be flashable in such a way that I don't lose my custom recovery image? In other words, is the SPL removed?

MrPadie said:
Just one question quickly. Say I extract the rom.zip from one of the official 2.1 RUU's - will it be flashable in such a way that I don't lose my custom recovery image? In other words, is the SPL removed?
Click to expand...
Click to collapse
Nothing is removed or added, just the same as using an HTC ruu on windows.
Sent from Steve Job's Android Dungeon with my HTC Hero

I see. Just a heads up - wine for mac does not allow the RUU install to get past the initial loading screen. Wine error is:
Code:
fixme:storage:create_storagefile Storage share mode not implemented.
err:module:import_dll Library MFC42u.DLL (which is needed by L"C:\\users\\allistersmith\\Temp\\{9A47FC28-4437-41C2-9AF8-0EAB066A2AE0}\\{50F2F878-636A-496F-A7CB-544C067E0C4B}\\ARUGlobal.dll") not found
err:module:import_dll Library MSVCP60.dll (which is needed by L"C:\\users\\allistersmith\\Temp\\{9A47FC28-4437-41C2-9AF8-0EAB066A2AE0}\\{50F2F878-636A-496F-A7CB-544C067E0C4B}\\ARUGlobal.dll") not found
err:module:import_dll Library ARUGlobal.dll (which is needed by L"C:\\users\\allistersmith\\Temp\\{9A47FC28-4437-41C2-9AF8-0EAB066A2AE0}\\{50F2F878-636A-496F-A7CB-544C067E0C4B}\\ARUWizard.exe") not found
err:module:import_dll Library MFC42u.DLL (which is needed by L"C:\\users\\allistersmith\\Temp\\{9A47FC28-4437-41C2-9AF8-0EAB066A2AE0}\\{50F2F878-636A-496F-A7CB-544C067E0C4B}\\ARUWizard.exe") not found
err:module:import_dll Library MSVCP60.dll (which is needed by L"C:\\users\\allistersmith\\Temp\\{9A47FC28-4437-41C2-9AF8-0EAB066A2AE0}\\{50F2F878-636A-496F-A7CB-544C067E0C4B}\\ARUWizard.exe") not found
err:module:LdrInitializeThunk Main exe initialization for L"C:\\users\\allistersmith\\Temp\\{9A47FC28-4437-41C2-9AF8-0EAB066A2AE0}\\{50F2F878-636A-496F-A7CB-544C067E0C4B}\\ARUWizard.exe" failed, status c0000135

MrPadie said:
I see. Just a heads up - wine for mac does not allow the RUU install to get past the initial loading screen. Wine error is:
Code:
fixme:storage:create_storagefile Storage share mode not implemented.
err:module:import_dll Library MFC42u.DLL (which is needed by L"C:\\users\\allistersmith\\Temp\\{9A47FC28-4437-41C2-9AF8-0EAB066A2AE0}\\{50F2F878-636A-496F-A7CB-544C067E0C4B}\\ARUGlobal.dll") not found
err:module:import_dll Library MSVCP60.dll (which is needed by L"C:\\users\\allistersmith\\Temp\\{9A47FC28-4437-41C2-9AF8-0EAB066A2AE0}\\{50F2F878-636A-496F-A7CB-544C067E0C4B}\\ARUGlobal.dll") not found
err:module:import_dll Library ARUGlobal.dll (which is needed by L"C:\\users\\allistersmith\\Temp\\{9A47FC28-4437-41C2-9AF8-0EAB066A2AE0}\\{50F2F878-636A-496F-A7CB-544C067E0C4B}\\ARUWizard.exe") not found
err:module:import_dll Library MFC42u.DLL (which is needed by L"C:\\users\\allistersmith\\Temp\\{9A47FC28-4437-41C2-9AF8-0EAB066A2AE0}\\{50F2F878-636A-496F-A7CB-544C067E0C4B}\\ARUWizard.exe") not found
err:module:import_dll Library MSVCP60.dll (which is needed by L"C:\\users\\allistersmith\\Temp\\{9A47FC28-4437-41C2-9AF8-0EAB066A2AE0}\\{50F2F878-636A-496F-A7CB-544C067E0C4B}\\ARUWizard.exe") not found
err:module:LdrInitializeThunk Main exe initialization for L"C:\\users\\allistersmith\\Temp\\{9A47FC28-4437-41C2-9AF8-0EAB066A2AE0}\\{50F2F878-636A-496F-A7CB-544C067E0C4B}\\ARUWizard.exe" failed, status c0000135
Click to expand...
Click to collapse
That's normal if you are just seeing the loading screen. You have to hit enter on the script just before it dissapears. I'm working on a better solution.
Sent from Steve Job's Android Dungeon with my HTC Hero

Ah, I see. I already tried to hit enter at that point, and it didn't find it - must have not been copied over yet. However, at the same time, I manually watched the temporary directory as it was being created and I didn't see the rom.zip file appear, from start to finish. Has it worked for you on Mac yet? Never the less, I achieved what I wanted with Windows...one of the very little things I can achieve with it
Keep up the good work, really great script.
Mr P.

Hello,
I have a problem with OpenRUU explained on modaco forum
Edit : It's OK, goldcard issue
Thank

Will this work if the RUU is not working ?
Hi,
Will openRUU extract a rom form the RUU to work on my hero if the RUU is not working in the exe mode on windows and giving signature error (even with goldcard).
I have a stock rom 2.73.405.66 and a custom recovery ClockWokMod 2.0.1.3 and I have not been able to downgrade to 2.73.405.5 using the "RUU_Hero_HTC_WWE_2.73.405.5_WWE_release_signed_NoDriver.exe" file with the latest HTC sync running and 2 different goldcards. Always a signature error.
Will openRUU work using the same RUU exe and my hero ?
Thanks,
Sean.

42turkeys said:
Nothing is removed or added, just the same as using an HTC ruu on windows.
Sent from Steve Job's Android Dungeon with my HTC Hero
Click to expand...
Click to collapse
thx mate..

Sign of a noob: I thought I knew what I was doing
Okay, ran the script as directed. It fell down a couple of times, so I altered a line in 1extractrom.sh to point to scripts/linux/cptoworkingdir.sh instead of scripts/cptoworkingdir.sh, then added a trailing "/" to the adb-linux push line in scripts/linux/desire.sh, after which it progressed smoothly and worked fine.
The phone boots okay into fastboot, recovery and into the OS. At least, I assume it boots okay...it certainly makes all the right beeps and buzzes. I can't be sure it's working okay because.....the screen is completely blank.
Not a flicker of life. I know it boots okay into fastboot, because I can connect to it with fastboot on my Ubuntu box, but I can't see a darned thing on the Desire's screen. No little red circle at first power-on. No boot screens or animation. Nothing.
So...what did I do wrong? Am I missing something obvious?

HTC Wildfire is not listed as an option, is it supported by the tool?

I was wondering the same thing it would be great if this works on the Wildfire.

Well, to be honest if this is using Wine then it is pretty useless.
Anyway, does it work on the HD2 Leo ??

[APP][Update to any Firmware region via Kies2.0][SpoofFw][Kies2.0]

A new approach!
Spoof the firmware version on the device, to trick Kies2.0.
But as you might understand, messing with system files is always dangerous and the possibility for a brick is always present. Hopefully this will not occur I'm doing my best to avoid that.
You should not use this app if you cannot get into Recovery and/or Download mode! (3 button combo) As always when you modifies system files!
Remember to disable any lagfix before updating!
For everyones safety I would recommend doing a manual backup of /system/build.prop and the complete /efs folder including nv_data.bin
The app does this automatically to the internal SDCARD, but just to be on the safe side I would recommend a manual backup to the computer aswell.
There is three steps where a reboot is required after step 2. The app will tell you what to do.
Step1.
Backup everything. If this fails, step2 is not available.
Step2.
Set the new ProductCode and PDA. Reboot!
Step3.
Set CSC and Phone. Do NOT reboot. Connect to Kies2.0 and update!
This setting is not permanent and will go back to previous setting after reboot.
Remember to disable any lagfix before updating!
Done!
-------------------------------------------------------------
How to Restore
Press restore in the menu. Reboot required.
If something fails, please send me your logcat.
So here it is: SpoofFw - requires ROOT and BusyBox
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Online Market link
If you get problems to connect to Kies after you used this program, try remove the registry key "HKEY_CURRENT_USER\Software\Samsung\Kies\DeviceDB"
Please let me now if it works out for you.
If you like my work, please consider a small donation.

Thanks a lot for your patch

Hi,
I'm new to the forum and am very interested in your work, at the moment the file to "fool " Kies 2.0 has not worked for me. I have the version 2.2 of Android 9000XWJPB/I9000FOPJP3/I9000XXJPP/I9000XWJPB and product code FOP. Sorry for my english, i'm from Spain.

what is new in this ??

It does'nt entirely work. Tried and it shows me update available.
But when it supposed to start downloading new rom, it say that latest software is already installed in my phone.Then Kies resets and start over offering update again.
So, I guess it detects the real rom in the phone.
Nice patch, though. Maybe you can see what is the problem.
Thanks

Same here - I just posted in the "original" theme about kies registry patcher.
Kies finds update, and when i start upgrading, the phone disconnects, and then after 1s reconects back. I cannot upgrade.

oh crap. didnt try to actually download it. thought it would work. I'll have a look at it. sorry guys.

No panic
Obviously some can upgrade, some cannot. We are the first with this problem.
I have jpx. Could this cause problems?

Those of you who have tried the patch, can you please post your info from the registry and tell me if it worked or not. Include both product code, hidswver, softwarerevision and modelname.

For me, in the registry is still JPY everywhere, after apply patch.
PRODUCT code : GT-I9000HKDXEU
HIDSWVER: I9000XXJPY/I9000OXAJPY/I9000XXJPY/I9000XXJPY
Model Name:GT-I9000
Software Revision: I9000XXJPY/I9000OXAJPY/I9000XXJPY/I9000XXJPY

HTH....
Running Kies 2.0.0.11014_49
HIDSWVER I9000XXJPO/I9000OXAJPO/I9000XXJPP/I9000XXJPO
Product Code GT-I9000HKDTMU
Model Name GT-I9000
Doesn't work unfortunately - it offers me an upgrade, appears to download the file then gives the Disconnected error.
I've also tried manually editing the registry as per kies 1.5 but no more luck.
I've tried on 2 PCs too.

HIDSWVER: I9000BUJP7/I9000GVD2JP5/I9000BUJP5/I9000BUJP7 (SofwareRev is same)
FW: I9000BUJP7/I9000GVD2JP5(CSC)/I9000BUJP5(modem)
PCode: GT-I9000HKDVD2 (VD2)
Kies: v2.0.0.11014_49
OS: Win7 Ultimate 64bit
I checked my registry but to no avail. Also tried deleting DeviceDB key to force kies into reconstructing it. It doesn't offer the fw upgrade option at all.
At least it's good to know someone is trying to develop a way to spoof kies 2.0. Did the patch work with any previous versions of kies 2.0?

I just got some another idea: could we try to hack ProductCode on device instead of on Kies side?
AFAIU ProductCode == CSC. I've googled we can change CSC in following ways:
1) *#272*HHMM# on Android 2.1 and older
2) *#272*IMEI# on Android 2.2 and newer
3) Opening preconfing with ADB
4) Editing /efs/nv_data.bin
Would it make Kies detecting different ProductCode?
There is still one more thing we have to consider: what if Kies detects our changed ProductCode but also firmware versions that were never released for given ProductCode?

Zajec5 said:
I just got some another idea: could we try to hack ProductCode on device instead of on Kies side?
AFAIU ProductCode == CSC. I've googled we can change CSC in following ways:
1) *#272*HHMM# on Android 2.1 and older
2) *#272*IMEI# on Android 2.2 and newer
3) Opening preconfing with ADB
4) Editing /efs/nv_data.bin
Would it make Kies detecting different ProductCode?
There is still one more thing we have to consider: what if Kies detects our changed ProductCode but also firmware versions that were never released for given ProductCode?
Click to expand...
Click to collapse
I have thought about it too. But we still need to change the PDA and PHONE aswell. But I have not yet located where they are stored. My guess is it's hard coded somewhere. Still the drivers need to take it from somewhere, the question is where.

LuffarJoh said:
I have thought about it too. But we still need to change the PDA and PHONE aswell. But I have not yet located where they are stored. My guess is it's hard coded somewhere. Still the drivers need to take it from somewhere, the question is where.
Click to expand...
Click to collapse
There is something like
getBasebandVersion, but I can't track RILRequest, how is is reading RIL_REQUEST_BASEBAND_VERSION... That could show us some file with baseband version maybe.

I have had some progress.
I have managed to change all necessary codes in the phone to be able to spoof Kies. This time I passed the step that the patch didnt!
Unfortunately it's not that simple, it requires root and changes system properties. But it's all reversible. I think I'll try to make an app of it during next week. First is a final exam on Monday.
watch this space.

well, it's much more fun to develop android application then study for an exam
I have successfully switched from XEN to XEE and to DBT.
I'm almost done, just some more bug testing. I'll probably release it tonight

Good news, wait for your release tonight.

luffarjoh said:
well, it's much more fun to develop android application then study for an exam
i have successfully switched from xen to xee and to dbt.
I'm almost done, just some more bug testing. I'll probably release it tonight
Click to expand...
Click to collapse
great news!!!

I have to push the release until tomorrow, I still have some fine tuning to do! Overall is works very well

[DFT][Updated!#3] HSPL / RSPL for HTC WP7 First Generation

DFT HSPL RSPL WP7F3
DarkForcesTeam proudly presents RSPL / HSPL
for phones HTC WP7 First Generation
(Short name is “WP7F”)
This is first big step to customization and community development for these devices.
History:
15.02.2012 Updated release. Revision #3.
Changes:
Was added support for 'SCHU1000' and 'PD291200' MIDs
Removed OTA update inside RSPL and HSPL, this allows to keep HSPL after HTC OTA Zune update.
Added warning screen about 4.XX and 5.XX
But still NO support for 4.XX and 5.XX
Support for CDMA devices: GoldC and SparkW
Wizard UI: only WWE support remains.
NOTE for ROM chefs:
SparkW custom ROMs must has "SPAW1000" MID instead of "PC402000".
This is done to protect from flashing Spark custom ROM to Spark_W and reversed.
18.08.2011 Updated release. Revision #2.
Changes:
Improved wizard GUI on non DPI 96 systems.
Added support for "PD291300", "PD291500" two new Schubert MIDs.
Replaced RSPL and HSPL for Spark from 1.10 to 1.20.
01.08.2011 Initial release. Revision #1.
WARNING TO ALL:
Do NOT use RSPL / HSPL with Mozart 4.XX and other RUU ROMS with MANGO.
All WP7F devices affected: MOZART, GOLD, SCHUBERT, MONDRIAN, SPARK!
It will damage your device. Not a joke.
MORE INFORMATION HERE
Read the next few messages for more information.
This release supports those WP7F devices:
*Gold (HTC Pro 7,T7575)
*Mozart (HD3,T8697,T8698,T8699)
*Mondrian (Surround,T8788)
*Spark (Trophy,T8686)
*Schubert (HD7, HD7S, T9292,T9295,T9296)
*HTC Gold C (HTC Arrive)
*HTC Spark W (Trophy Verizion)
Most of these devices have several MIDs (ModelID, looks like “PC921000”).
Current release supports only some limited number of MIDs. This was designed to minimize possible harm to user’s devices.
List of supported MIDs:
Gold: “PC92****”, “PC921000”
Mozart: “MOZA1000”, “PD67****”, “PD671000”, “PD671200”
Mondrian: “PD26****”, “PD261000”, “PD261100”
Spark: “PC401000”
Schubert: “PD29****”, “PD291000”, “PD291100”, "PD291200", "PD291300", "PD291500"
!Please note that on SPL screen MID is only 7 symbols, without last one.!
Programs stops any operations if unknown MID detected. If your device have unknown MID, please report about it in this thread. Specify your MID, device name, ROM versions. It’s nice, if you can give a link to download ROM.
Basic stuffs to know:
SPL is Secondary Program Loader. It allows to flash ROMs to device.
Without working SPL device is fully bricked, you can’t restore it. It’s why all operations with SPL are dangerous.
OSPL is Original SPL. This SPL comes with stock ROM and doesn’t allow to flash custom stuffs.
RSPL is Reloaded SPL. It load only to RAM, so it doesn’t persistent. It’s enough to soft reset device to get OSPL back.
HSPL is Hard SPL. It’s permanently flashed to internal device memory and replaces OSPL. After soft reset you still have HSPL instead of OSPL.
This release consists from RSPL and HSPL wizards.
For regular users, who flash ROMs rather rare, it can be enough to use only RSPL.
For advanced users and ROM makers, it can be useful to install HSPL.
IMPORTANT NOTES
1. Before doing any operations be sure you have battery level more than 50%!
Sometimes in SPL mode WP7F devices DO NOT charge. You may got a cold brick if it power down during SPL or RADIO update!
2. Stock RUU ROMs have two NBH inside, SPL_Signed and RUU_Signed.
So it's not possible directly flash stock ROM, you need extract files and remove SPL_Signed.nbh at least.
3. Rememeber if you have HSPL and you flashing stock RUU_Signed.nbh you lost HSPL!
4. Supported OS: Windows XP, Windows Vista, Windows 7.
Warranty Issues
Be warned, using RSPL may void your warranty.
If you need to send your device to a Repair Centre, make sure that it looks like stock! Install stock official ROM before go to Repair Centre.
Disclaimer
This product is free to use at your own risk. We take no responsibility for any conflict, fault, or damage caused by this procedure. No warranties implied or otherwise, are given if you agree to use this product. No problems were found while testing this product on several different devices, your experience may vary.
Use of the Product for commercial purposes is strictly prohibited.
It’s not allowed to make changes to this package; it must be distributed as original release.
Last version (R#3)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Official DFT site (Chinese)
-DFT, 18.08.2011

Launching RSPL
DFT_RSPL_WP7FG1_LAUNCH allows you to load RSPL on the device:
1. Extract ALL files from RAR archive.
2. Run DFT_RSPL_WP7FG1_LAUNCH (with administrative rights to access USB)
3. Mindfully reads information text. Press “Next” button.
4. Reset your device and hold “Volume Down” button during reset to enter OSPL mode.
5. Connect your device to PC via USB cable.
6. Now you may need to install proper USB drivers. They come with Active Sync / Windows Mobile Device Center.
7. Install drivers if required.
8. Make sure device show “USB” at the bottom instead of “Serial”.
9. Press “Next” button in the wizard. It should detect your phone.
10. If you are using WCEUSBHS driver under Windows Vista/7 (for MTTY or MAGLDR TTY for example), you should apply “Windows XP compatible mode” in the properties of EXE file to get connection.
11. After successful connection it should show device codename and allows to choose installed OSPL version.
12. You should look at the screen and select OSPL version in drop down list box. You need do this because it’s not possible to detect installed version via USB.
If your current SPL version doesn't present in the list, you can choose nearest version,
BUT ONLY IF IT HAS SAME FIRST NUMBER!!
Example: You have 4.XX on the device. Do NOT choose 1.XX 2.XX 3.XX.
13. Press “Next”. Wait until comes final page.
14. Read and close window
15. Look at the device – it must reboot to RSPL.
16. If you see RSPLX.Y.Z and “CotullaRSPL” on the screen – the task done! Otherwise, please report in this thread about your problems.
17. Put some feedback in this thread for community and developers.
Installing HSPL
DFT_HSPL_WP7FG1_INSTALL allows you to install HSPL on the device:
1. Launch RSPL on the device like described above.
2. Be sure that you close RSPL wizard window.
3. Run DFT_HSPL_WP7FG1_INSTALL.exe (with administrative rights to access USB)
4. Mindfully reads information text. Press “Next” button.
5. Proper drivers already must be installed in RSPL step.
6. Press “Next” button in the wizard. It should detect your phone.
7. If you are using WCEUSBHS driver under Windows Vista/7 (for MTTY or MAGLDR TTY for example), you should apply “Windows XP compatible mode” in the properties of EXE file to get connection.
8. After successful connection it should show device codename and allows to choose HSPL or OSPL version to install. OSPL means you install stock SPL back.
9. Check device codename, if something wrong turn off computer and run to the nearest forest. Grab some water with yourself.
10. Press “Next”. Wait until comes final page.
11. Device will reboot and start to boot OS.
12. Reset it and enter SPL mode again. Be sure there HSPLX.Y.Z and “CotullaHSPL” appear.
13. Put some feedback in this thread for community and developers.

Example of HSPL screen on HTC Schubert:

Issues with MANGO RUU ROMS.
List of such ROMs:
It's not full list. Maybe some other ROMs affected by this too.
Thread about this ROMs.
RUU_Gold_S_HTC_Europe_3.02.401.01_Radio_5.69.09.29 a_22.50.50.21_Signed_GOLD_RELEASE.exe
RUU_Mozart_S_HTC_Europe_4.06.401.00_5.69.09_RELEAS E.exe
RUU_Mozart_S_HTC_RUS_4.06.411.00_5.69.09_RELEASE.e xe
RUU_Schubert_S_HTC_Europe_4.05.401.02_Radio_5.69.0 9.29a_22.50.50.21_Signed_SCHUBERT_RELEASE.exe
RUU_Spark_S_HTC_Europe_4.06.401.00_5.69.09_RELEASE .exe
About issue:
After running RSPL on MANGO OSPL, you can't flash device via SPL.
Windows Phone 7 OS is still booting and working.
Instead of full SPL screen you will see only one the first line:
You device will be "HALF BRICKED", because you can use OS, but can't flash anything else.
At the current moment it's IMPOSSIBLE to recover such devices. And I am not sure it will be ever possible.
What you must NOT do:
Before running RSPL wizard check your SPL screen.
There current SPL version at top: "X.Y.Z 2250 "
When wizard asks you to choose your current SPL version, be sure it's present inside versions list.
If your current SPL version doesn't present in the list, you can choose nearest version, BUT ONLY IF IT HAS SAME FIRST NUMBER!!
Example: You have 4.XX on the device. Do NOT choose 1.XX 2.XX 3.XX.
Generally it means that you must NOT run RSPL wizard after MANGO RUU ROM installation. You must flash older version (with 7004 or NoDo) and then run RSPL.
Installed OS version doesn't important. Only SPL version important.

reserved 4

reserved 5

Great work Cotulla you've done it again, broken through that barrier that just keeps our devices from being something wonderful.

I am so excited!!!!!!!!!!
I've been waiting on this for ages!

I just want to confirm, Does this support *Schubert (HD7,HD7s, T9292,T9295,T9296) for the install of HSPL? When I launch the install HSPL program it does not show up as a supported device, but when you launch the Launch RSPL it shows up as a supported device. Thanks.

Enter your device to SPL mode (Hold VolumeDown during reset) and look at the screen:
if you see there "PD29****”, “PD291000” or “PD291100" - it should work
You need run HSPL program _only_ after successful run of RSPL program!

great news. thanks alot to cotulla/dft.

Hey Cotulla, thanks for yet another break through from DFT. ive got the Bell HD7 (t9295) and thought id check..with the RSPL my model is not identified. the MID is PD291300. OS 7.10.7712.60 (mango) SPL 2.16.2250.0(117476)
this is the stock Bell Rom from ansar http://forum.xda-developers.com/showthread.php?t=1015699

Thank for the great work. HSPL loaded on my T-Mobile HTC HD7 PD29110.

thanks a lot to dft,HSPL loaded on my Mozart PD67***

great work cotulla
so we Can expect soon the Mango rtm build ?

thank you soooooooo much to share this tool

thanks cotulla!thanks DFT!

Does this work for the att hd7s -- pd29150 ANY HELP HERE PLZ

And my HD7 will run Android ?

Great work!
Thanks to Cotulla and DFT!

Redstone 10.0.14393.5 - Lumia 920 [UNLOCKED BOOTLOADER] [MASS STORAGE]

Maybe it is already known to some of you but I would like to share that it still possible to upgrade from Windows Phone 8.1 to Redstone if you have a Lumia 920, and to remain the unlocked bootloader with Mass Storage if you use WPInternals. I am assuming this method works for more Lumia x20 devices
My device: Lumia 920
Product code: 059R018
Manumodelname: RM-821-eu-netherlands-315
Steps I took:
-Rolled back device to Windows Phone 8.1 using Windows Device Recovery Tool.
Windows Device Recovery Tool flashed this rom onto my device:
RM821_3051.50009.1424.0005_RETAIL_eu_netherlands_315_05_442325_prd_signed.ffu
-Updated to the latest official Windows Phone 8.1 update for Lumia 920.
-Used WPInternals 1.2 to unlock bootloader and flash SBL3 to enable MassStorage. Partition table of RM821_3051.50009.1424.0005_RETAIL_eu_netherlands_315_05_442325_prd_signed.ffu was used.
-Rooted the device using WPInternals 1.2
-Deployed vcReg_1.5 and used Live Interop Unlock template.
-Deployed customPFD (@Pasquiindustry)
-Modified registry as described here.
-Installed Windows Insider and enrolled for Fast Ring.
-Upgraded to W10 Redstone 10.0.14393.5
-Hardreset after upgrade
The Unlocked Bootloader and MassStorage mode are still working without any problems. I therefore made a full ROM dump (EFIESIP, MainOS, Data) using WPInternals 1.2.
I would upload the ROM but since it is 29GB this would take ages.
(If you have suggestions for where to upload or how to make files smaller, please PM me)
Screenshot
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

sure the bootloader stays unlocked, os updates cant lock it again. it stays unlocked till you reflash your phone with the recovery tool (or till the device recieves and ota firmwareupdate, which wont happen for old devices at all)
and i can confirm it works. just compress the archive, will end up in 15gb instead of 30gb. did that last week for my 920 too. the dude here from windowsmania.pl already announced custom roms (which are creatable with wpinternals too and are way smaller, cause in your archive you have the data partition too etc; which you shouldnt upload cause it contains access to the ms account etc you used to configure your device). i only replied cause i wanted to warn you to upload that

Hi Guys
Can someone upload a W10 ROM for the Lumia 920, with unlocked loader and root access. I can only find one on megaNZ , it flashes on the phone without any errors using windows phone internals, but goes into a boot loop with the Nokia logo..

HATA28 said:
Maybe it is already known to some of you but I would like to share that it still possible to upgrade from Windows Phone 8.1 to Redstone if you have a Lumia 920, and to remain the unlocked bootloader with Mass Storage if you use WPInternals. I am assuming this method works for more Lumia x20 devices
My device: Lumia 920
Product code: 059R018
Manumodelname: RM-821-eu-netherlands-315
Steps I took:
-Rolled back device to Windows Phone 8.1 using Windows Device Recovery Tool.
Windows Device Recovery Tool flashed this rom onto my device:
RM821_3051.50009.1424.0005_RETAIL_eu_netherlands_315_05_442325_prd_signed.ffu
-Updated to the latest official Windows Phone 8.1 update for Lumia 920.
-Used WPInternals 1.2 to unlock bootloader and flash SBL3 to enable MassStorage. Partition table of RM821_3051.50009.1424.0005_RETAIL_eu_netherlands_315_05_442325_prd_signed.ffu was used.
-Rooted the device using WPInternals 1.2
-Deployed vcReg_1.5 and used Live Interop Unlock template.
-Deployed customPFD (@Pasquiindustry)
-Modified registry as described here.
-Installed Windows Insider and enrolled for Fast Ring.
-Upgraded to W10 Redstone 10.0.14393.5
-Hardreset after upgrade
The Unlocked Bootloader and MassStorage mode are still working without any problems. I therefore made a full ROM dump (EFIESIP, MainOS, Data) using WPInternals 1.2.
I would upload the ROM but since it is 29GB this would take ages.
(If you have suggestions for where to upload or how to make files smaller, please PM me)
Screenshot
Click to expand...
Click to collapse
I've tried to do it, I unlocked the bootloader and rooted the phone with WP Internals, but I can't deploy xaps with the Windows Phone SDK. I even tried to move it to the phone and install it from file explorer, but it doesn't work. How can I deploy the xaps?

...and this guide still work after closing update for the unsupported device (920, my 925..) ? can you explain this in easymode?
thanks

Easy steps
blackpanther0 said:
...and this guide still work after closing update for the unsupported device (920, my 925..) ? can you explain this in easymode?
thanks
Click to expand...
Click to collapse
You can find it in easy steps here

gakshat14 said:
You can find it in easy steps here
Click to expand...
Click to collapse
Thank you very much!

Is glance screen working? I installed 10.0.14393.5 but can't find the settings anymore.
And would it be wise to change the registry settings back to original after getting the update?

phoenix0_4 said:
Is glance screen working? I installed 10.0.14393.5 but can't find the settings anymore.
And would it be wise to change the registry settings back to original after getting the update?
Click to expand...
Click to collapse
I think if you hard reset the phone, they go back to original. At least mine says it's Lucia 920 and I changed the keys to be lumina 535 to get the update

Ah, okay. Good to know, since I did a hard reset.
Will my Lumia 920 get further updates after changing back to the original settings?

phoenix0_4 said:
Ah, okay. Good to know, since I did a hard reset.
Will my Lumia 920 get further updates after changing back to the original settings?
Click to expand...
Click to collapse
I don't think so, but I'm not using it right now. Probably we'll need to change the values again

Yes, we do. After changing it back to Lumia-830-settings, there is another update.

you need to change the values everytime to get a new os-update, download of speechfiles and keyboardlayout works fine without (but you have to reopt to insiderring if you did a hardreset). i recommend changing the values to the original ones after every update, otherwise the store does crazy thing (atleast did for me)

Okay, did it. Thanks.
Is there a way to get the glance-function back to life? (The option for it in "personalisation" is missing and that one in "extras" is not working anymore.)

You can upload only EFIESP and MainOS without Data, because the last one is useless.
You can flash EFIESP and MainOS even if you are in WP8.1, but keep in mind that you need to do an hard reset via volume keys.

read pages ~90-100 in the oder thread about old devices running redstone. you find everything there you need

Ah, found it. Thanks. I just can't create dword-keys with InteropTool. But you mentioned, that there could be coming a fix/tweak in the next version of the InteropTool. Perhaps, I will just wait. ^^

there wont, gus isnt able to fix some write issues. without massstoragemode the only way to change them is custompfd + custompfd remote on your desktop

How is the performance? Does x20 devices run better with redstone?

@tofuschnitte:
Okay, I'll try that. But is there a way to enable the glance-setting, which should be in "personalisation"? Perhaps that would be enough?
(And a tweak in the InteropTools to quickly change the registry to, let's say the Lumia 950 oder 830 would be nice. )

Help unlock huawei HWD14

no way to putt NCK , no information on internet , Putty erro, DC unlocker not support .if found NCK how do i use that ? firmware update?? but where? this is real challenging for me
tks
ATI
Manufacturer: Huawei Technologies Co., Ltd.
Model: HWD14
Revision: 11.232.03.10.824
IMEI: 3528980453****
+GCAP: +CGSM
OK
AT^NVRDEX=50503,0,128
ERROR

Anandasri2 said:
no way to putt NCK , no information on internet , Putty erro, DC unlocker not support .if found NCK how do i use that ? firmware update?? but where? this is real challenging for me
tks
ATI
Manufacturer: Huawei Technologies Co., Ltd.
Model: HWD14
Revision: 11.232.03.10.824
IMEI: 3528980453****
+GCAP: +CGSM
OK
AT^NVRDEX=50503,0,128
ERROR
Click to expand...
Click to collapse
Found modem : M9625E-1
Model : Huawei HWD15
IMEI : 352898045xxxxxx
Serial NR. : N7SDW1431700xxxx
Firmware : 11.232.03.10.824
Dashboard version : 22.001.26.06.824
SIM Lock status : Locked (Card lock)
Wrong codes entered : 0 (unlock attempts left : 10)
sorry, this modem not supported !

Anandasri2 said:
Found modem : M9625E-1
DC unlocker
Model : Huawei HWD15
IMEI : 352898045xxxxxx
Serial NR. : N7SDW1431700xxxx
Firmware : 11.232.03.10.824
Dashboard version : 22.001.26.06.824
SIM Lock status : Locked (Card lock)
Wrong codes entered : 0 (unlock attempts left : 10)
sorry, this modem not supported !
Click to expand...
Click to collapse
CardLock_UnLock-e58xx/HUAWEI MODEM Code Writer not working ether for NCK enter may be Firmware block ..!

Anandasri2 said:
CardLock_UnLock-e58xx/HUAWEI MODEM Code Writer not working ether for NCK enter may be Firmware block ..!
Click to expand...
Click to collapse
only firmware online is "easy-firmware" looks scam to me cuss it's paid and suspicious .
HWD14_11.232.03.30.824_22.001.26.06.824
HWD14TCPU-V100R001B232D03SP30C824_Firmware_05012FPY.zip
Date: 26-09-2018  | Size: 270.65 MB
found something working but got error
"CardLock_UnLock-e58xx " code writer detect this device but when enter NCK its got error, may be due to firmware block
For NCK used old V1 algo cuss imei# start we 35XXXXXXXXXXX
but non of attempts count according to DC unlocker still remain 10 chances
if not found any solution soon i will try to update it by Web UI built in using auto update, but still hesitate to do cuss it may more difficult to unlock
*i tried using puty telnet /Serial commands but no success
++++++++++++++++++++++++++++++++++++++++
1.at^sfm=1
2.at^reset
3.AT^NVWREX=8268,0,12,1,0,0,0,2,0,0,0,A,0,0,0
4.at^sfm=0
5.at^reset
+++++++++++++++++++++++++++++++++++
atc ati
atc at^nvwrex=8268,0,12,1,0,0,0,2,0,0,0,a,0,0,0
+++++++++++++++++++++++++++++++++++=
ATI
ATI
AT^NVRDEX=50503,0,128
++++++++++++++++++++++++++++++++++++
if i found any progress i will update , also if some one can help much appreciate...!:angel:
tks,

Anandasri2 said:
only firmware online is "easy-firmware" looks scam to me cuss it's paid and suspicious .
HWD14_11.232.03.30.824_22.001.26.06.824
HWD14TCPU-V100R001B232D03SP30C824_Firmware_05012FPY.zip
Date: 26-09-2018  | Size: 270.65 MB
found something working but got error
"CardLock_UnLock-e58xx " code writer detect this device but when enter NCK its got error, may be due to firmware block
For NCK used old V1 algo cuss imei# start we 35XXXXXXXXXXX
but non of attempts count according to DC unlocker still remain 10 chances
if not found any solution soon i will try to update it by Web UI built in using auto update, but still hesitate to do cuss it may more difficult to unlock
*i tried using puty telnet /Serial commands but no success
++++++++++++++++++++++++++++++++++++++++
1.at^sfm=1
2.at^reset
3.AT^NVWREX=8268,0,12,1,0,0,0,2,0,0,0,A,0,0,0
4.at^sfm=0
5.at^reset
+++++++++++++++++++++++++++++++++++
atc ati
atc at^nvwrex=8268,0,12,1,0,0,0,2,0,0,0,a,0,0,0
+++++++++++++++++++++++++++++++++++=
ATI
ATI
AT^NVRDEX=50503,0,128
++++++++++++++++++++++++++++++++++++
if i found any progress i will update , also if some one can help much appreciate...!:angel:
tks,
Click to expand...
Click to collapse
working this command
but
ATI
> AT ^ CARDLOCK?
^ CARDLOCK: 1,10,0
when enter
AT ^ CARDLOCK = "Xx NCK CodeXXX" nothings happen so i realize this is firmware block ...
so i have to find modified firmware for do this so if any one have access to easy-firmware. com resource and get "HWD14_11.232.03.30.824_22.001.26.06.824 HWD14TCPU-V100R001B232D03SP30C824_Firmware_05012FPY.zip" pls share with me : so at least give a try ..

Anandasri2 said:
working this command
but
ATI
> AT ^ CARDLOCK?
^ CARDLOCK: 1,10,0
when enter
AT ^ CARDLOCK = "Xx NCK CodeXXX" nothings happen so i realize this is firmware block ...
so i have to find modified firmware for do this so if any one have access to easy-firmware. com resource and get "HWD14_11.232.03.30.824_22.001.26.06.824 HWD14TCPU-V100R001B232D03SP30C824_Firmware_05012FPY.zip" pls share with me : so at least give a try ..
Click to expand...
Click to collapse
+++++++++++++++++++++ DAY 5 ++++++++++++++++++++++++++++
finally found way to download original Firmware , with all revision
HWD14_UPDATE_11.232.03.10.824_22.001.26.06.824.ZIP English/Japanese
HWD14_UPDATE_11.232.03.30.824_22.001.26.06.824.ZIP English/Japanese
bit of research i realize ZIP is a compressed bin file, not a compressed package.. also i know nothing abut these files so i have to dig more to learn how to handle those file may it's impossible but still i don't
know :laugh:
now i have
*firmware file
*Hi links drivers to enable COM port

Anandasri2 said:
+++++++++++++++++++++ DAY 5 ++++++++++++++++++++++++++++
finally found way to download original Firmware , with all revision
HWD14_UPDATE_11.232.03.10.824_22.001.26.06.824.ZIP English/Japanese
HWD14_UPDATE_11.232.03.30.824_22.001.26.06.824.ZIP English/Japanese
bit of research i realize ZIP is a compressed bin file, not a compressed package.. also i know nothing abut these files so i have to dig more to learn how to handle those file may it's impossible but still i don't
know :laugh:
now i have
*firmware file
*Hi links drivers to enable COM port
Click to expand...
Click to collapse
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
working with some tools in linux (binwalk... ect ) but still no luck if some one can mod this firmware pls let me know i will send the link ... cuss it's long way to go learn Reverse Engineering :silly:

Anandasri2 said:
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
working with some tools in linux (binwalk... ect ) but still no luck if some one can mod this firmware pls let me know i will send the link ... cuss it's long way to go learn Reverse Engineering :silly:
Click to expand...
Click to collapse
FM file links
http://update.hicloud.com:8180/TDS/..._UPDATE_11.232.03.10.824_22.001.26.06.824.ZIP
http://update.hicloud.com:8180/TDS/..._UPDATE_11.232.03.30.824_22.001.26.06.824.ZIP

Anandasri2 said:
FM file links
http://update.hicloud.com:8180/TDS/..._UPDATE_11.232.03.10.824_22.001.26.06.824.ZIP
http://update.hicloud.com:8180/TDS/..._UPDATE_11.232.03.30.824_22.001.26.06.824.ZIP
Click to expand...
Click to collapse
doesn't work because the file is corrupted looks like it's faking about corrupt cuss looks suspicious to me ,i think archive is good but they don't need open it easily:laugh: still looking forward
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Anandasri2 said:
doesn't work because the file is corrupted looks like it's faking about corrupt cuss looks suspicious to me ,i think archive is good but they don't need open it easily:laugh: still looking forward
Click to expand...
Click to collapse