I tried to flash clwrk rec mod to my gio, somehow I managed to brick it Now the phone won't even boot. so i put my phone into download mode and using odin reflash the stock fw. but odin stucks at setup connnection. I am using the odin v4.42 and gio v1.0 ops file.
Used windows 7 x86 as well as windows xp sp2 x86.
Tried different usb ports
tried using dif computers
PLEASE HELP
did you did vold down home and power ??
======================
SGS II 2.3.5 ROM
for galaxy ace
======================
TheSeriousMOD V1
for galaxy ace
======================
TheSeriousMOD V1
for galaxy gio
======================
made by Robinandroid
Yes, Volume down,Power Button and Home button.
robinandroid said:
did you did vold down home and power ??
======================
SGS II 2.3.5 ROM
for galaxy ace
======================
TheSeriousMOD V1
for galaxy ace
======================
TheSeriousMOD V1
for galaxy gio
======================
made by Robinandroid
Click to expand...
Click to collapse
Can you enter recovery mode (hold down home only and start)?
This might sound silly, but also make sure your battery is fully charged. And do, the phone probably won't be able to do the job. (Unless you still get the charging icons when the phone is plugged in but turned off.)
if u can get it in recovery mode download phiexz's cyanogen mod 7.1 instal zip from recoverymode ( take sd card out of phone and put in pc )
and then instal googlegapps
then reboot phone then it should just work fine
if not getting in recovery get in download mode download giopro 1.4 (install using oding v4.42 )
Howto :
#1put phone in download mode then plug in pc
#2 select the gio ops v1.0
#3select single package
#4select the giopro v1.4
#5 START!!!
P.S. when its booting and its on bootimage it takes a while to start (whit me it was ) when you see GIOPRO falling down and it wont start take out battery wait 1 or 2 sec and put it in then start recoverymode wipe data/ factory reset then its done (and ofc reboot )
if i helped u plz thank me
Greetings googlefuck13
Sent from my GT-S5560
you have try USB JIG..???
Have you installed the USB drivers for Gio?
I had this lik 2 days ago.
What i did was pull out the battery press all the buttons to get in to download mode (power + volume down + home) and then put in the batt again while pressing all the buttons. (You will get into download mode) And after that just flash a custom or stock rom with odin.
Sent from my GT-S5660 using xda premium
I have installed all the drivers, but I cannot get the phone into recovery mode.
I tried to flash back to stock using odin, but it just stop at setup conncection
Darkshado said:
This might sound silly, but also make sure your battery is fully charged. And do, the phone probably won't be able to do the job. (Unless you still get the charging icons when the phone is plugged in but turned off.)
Click to expand...
Click to collapse
The phone doesn't work buddy,
I know, if the battery is too low, this could cause issues with download mode.
Also, do we even have a single confirmed report of a download mode USB jig working on the Gio?
But I'm afraid your phone is in need of professional attention.
Sent from my Nexus S using XDA App
Related
Somebody can help me? Dont work 3 buttons for recovery.
replacing stock recovery with clockworkmod recovery..
I have the video
you can see the video
javcarbe said:
Somebody can help me? Dont work 3 buttons for recovery.
replacing stock recovery with clockworkmod recovery..
I have the video
you can see the video
Click to expand...
Click to collapse
did You tried another ROM ?
I had this kind of issue in the past when mixed up different kernel, rom and speedmod or something. Just try download stable ROM from XDA and try to flash step by step via ODIN.
I'm sure You be successful.
Calm down it is not bricked it is not working because given above.
HERE You have list of workin ROM list. Now I'm on Debus and recomend it.
Flash Stock Froyo Software with Odin
Flash the XXXJPU again with ODIN.
You have to Press Vol Down + Home + Start Button.
Then open Odin.
Connect Your Samsung Handy to PC
If Odin doesn't recognize your Handy, download the samsung USB driver
If you successfull flashed the XXXJPU, put the MIUI6vxxx File and Samsung EFSBackup data onto your sd card.
and Then you can flash the new MIUI Firmware.
At first flash speedmod 500hz with odin as PDA
then go to recovery and install zip : galaxy efs backup
pull the battery out and start in download mode.
Then Flash cm7 galaxy inital kernel with odin but un tick Auto Restart.
and then wipe data and cache
then install miui6vxx
Didnt work the Vol Down + Home + Start Button. so how can I fix?
try this, plug your phone to your pc, if your phone is detected properly, use this and use the reboot download script. If this doesn't work, I can bet 50000000$ that your phone is not bricked. The fact it's loading make me sure it's aint bricked. Buy a jig on ebay, turn your phone off ( Pull the battery ) plug the jig, and you will be in download mode. Reflash a stock firmware with bootloader. This will mostly fix your problem. Next time, ask in general or Q&A, this place is only for development. Have a nice day.
javcarbe said:
Didnt work the Vol Down + Home + Start Button. so how can I fix?
Click to expand...
Click to collapse
Pull battery out for 30 secs. Then retry repacing battery and holding the volume down, power and home button until download mode appears. Should get you there no problems.
I would download gti9000b firmware from xda and flash from Odin to get a stock firmware. Remember to repartition and load bootloaders to make sure everything is "as is should be"
From what I see in the video I'm guessing you have gingerbread bootloaders on CM kernel/CWM which don't work at all. you may just get away with flashing a chainfire CWM kernel from download mode with Odin but it may be too screwed up with the cyanogenmod stuff and need a complete Odin firmware flash as above.
Sent from my GT-I9000 using XDA Premium App
You need a GT 9000B ROM/kernel. If you lost your combo, must try with hairdryer or jit tag.
I feel yr pain mate, but I would urge you to post this in the correct section - q&a or general. The stickies are quite clear.
I'm glad so many people have helped you, many such posts in the development section have gone unanswered.
Blockbuster 2.3.4
Try JIG it help me!
At marktplaats ( EBAY??) you can buy an usb device to help you it works great.
Search te forum "Samsung i9000 galaxy S micro USB download mode Jig"
No need for tree button combo anyemore.
http://forum.xda-developers.com/showthread.php?t=819551
http://cell-phones.shop.ebay.com/Cel...=p3286.c0.m282
So, i installed Rom Manager and noticed that it has Gio in the supported list, so i flashed CWM with rom manager and it went fine.
But, when i choose to reboot to recovery from rom manager, it reboots to CWM v4.x.x. and when i power down the phone and boot to recovery via holding home+power, it boots to phiezx's CWM v5.x.x. so i have 2 recoverys at the same time.
Is this just a rom managers feature?
Sent from my GT-S5660
Dont use rom manager it wil brick your phone
======================
SGS II 2.3.5 ROM
for galaxy ace
======================
TheSeriousMOD V1
for galaxy ace
======================
TheSeriousMOD V1
for galaxy gio
======================
made by Robinandroid
------------------------------------
Current state/rom: stock
Yup, im not flashing anything with it.
Sent from my GT-S5660
hsrars-d said:
So, i installed Rom Manager and noticed that it has Gio in the supported list, so i flashed CWM with rom manager and it went fine.
But, when i choose to reboot to recovery from rom manager, it reboots to CWM v4.x.x. and when i power down the phone and boot to recovery via holding home+power, it boots to phiezx's CWM v5.x.x. so i have 2 recoverys at the same time.
Is this just a rom managers feature?
Sent from my GT-S5660
Click to expand...
Click to collapse
Yes, ROM Manager installs it's own recovery (4.0.1.5). It just supports ext2 format on sd-ext, though, phiexz cwm (5.0.2.7) is the newest cwm and supports ext4. ROm manager cannot handle this on the gio, it seems. I mailed to the developer about it before xmas, but never got an answer.
@robinandroid
it seems ROm manager now supports the gio officially, i used it without brick.
It's just no good with latest cwm from phiexz, so I dropped rom manager again.
not be responsible nor liable for any damage that might happen to your device during this process though the possibility of any damage is negligible. Try this at your own risk. This process has been tested and verified working on Samsung Galaxy Y.
Overclocking Galaxy Y
What is overclocking?
Overclocking a process to raise your phones power over the limits imposed by the manufacturer. When more power is increased more it will heat up the processor but the system will run faster. On computers is common, from slight increases, sometimes even made up extreme overclocking, cooling systems using large and expensive overcoat. In our cell, which is what we want, we can slightly increase the power of the processor through different software and of course, we must have root privileges.
How to do it ?
1. Download OVERCLOCK below
2. Copy it on you sdcard
3. Switch off your phone
4. Press volume up key + power key + home button
5. Now you are in recovery mode
6. First do wipe data, then wipe cache
7. Then click on second option which instal update from sdcard
8. Select that file from sdcard use volume up key for up and volume down key for download and for select use home botton
9. Then restart you phone by pressing first option.
10. Wait because phone takes time to start
11. Follow screen instruction then download CPU MASTER below
*NOTES:
IT WORKS IN STOCK ROM AND ANY OTHER ROM
Credits goes to Maroc-OS and GalaxyYarena
OVERCLOCK:
http://*******/403679/http://www.mediafire.com/?au7msanz6nz930z
CPU MASTER:
http://*******/403679/http://www.mediafire.com/?b49j5dfhxpes5a5
bad manners to post someone's creation by renaming it... u should take permission before sharing it on ur free will.... ty but OC IS CURRENTLY NOT WORKING ON SGY
Srry but there is people want it
P.S: i am noob here .... sry again
Sent from my GT-S5360 using xda premium
gelouwk said:
Srry but there is people want it
P.S: i am noob here .... sry again
Sent from my GT-S5360 using xda premium
Click to expand...
Click to collapse
No problem buddy
got stuck on samsung logo boot!
pulled out the battery and same thing.. stuck..
im using repencis kernell, repencis rom v3.5
xylu said:
got stuck on samsung logo boot!
pulled out the battery and same thing.. stuck..
im using repencis kernell, repencis rom v3.5
Click to expand...
Click to collapse
old....
gimme something new
that's beta version of merruk kernel. too many bugs. don't ever use it.
kurotsugi said:
that's beta version of merruk kernel. too many bugs. don't ever use it.
Click to expand...
Click to collapse
thanks sir.. its good i have a back up.. :good:
flash samsung galaxy y s5360 using odin
Hi friends,
Today iam showing u how to flash stock rom of samsung galaxy y s5360
1.Download and extract flash files
2. Run odin.Make sure you turn off antivirus & kies
3.Install the Samsung Drivers to connect your phone with USB Cable.
4. Restart your phone in Download mode. Press Volume Down+ Home + Power button together.
5. Open the Odin tool and then connect your phone via usb cable.
(Odin will detects your phone, and shows the message Detected with Yellow background)
6. After that Select PDA and Choose the PDA file that you extracted
7. Then Click Phone and select the File named as Phone or Modem.
8. And then Click CSC and select the file named as CSC.
(Leave other fields empty)
9. Click Start button.
Wait for the process to end.
(After the process is done, you will see the message PASS with green background)
10. your phone restarts and u see logo of android touch on it to begin
Thats all...
Now you successfully flashed Stock ROM (Firmware )on your Samsung Galaxy Y.
NajuAynr said:
Hi friends,
Today iam showing u how to flash stock rom of samsung galaxy y s5360
1.Download and extract flash files
2. Run odin.Make sure you turn off antivirus & kies
3.Install the Samsung Drivers to connect your phone with USB Cable.
4. Restart your phone in Download mode. Press Volume Down+ Home + Power button together.
5. Open the Odin tool and then connect your phone via usb cable.
(Odin will detects your phone, and shows the message Detected with Yellow background)
6. After that Select PDA and Choose the PDA file that you extracted
7. Then Click Phone and select the File named as Phone or Modem.
8. And then Click CSC and select the file named as CSC.
(Leave other fields empty)
9. Click Start button.
Wait for the process to end.
(After the process is done, you will see the message PASS with green background)
10. your phone restarts and u see logo of android touch on it to begin
Thats all...
Now you successfully flashed Stock ROM (Firmware )on your Samsung Galaxy Y.
Click to expand...
Click to collapse
Have u ever searched before posting.??
There are numerous thread regarding it...:sly:
** rooting is new for me,
nd i am a noob to root....**
I think it takes more battery.
ROM: JellyBlast
Deleted
Sent from my GT-S5360 using xda app-developers app
overclock link error
I tried the link at the top..its not working .. gives an error message.. dont know why..
another thread worthy in the trash bin
with the help of a custom kernel galaxy y can b overclocked to 1.248 GHZ
abhisek de said:
with the help of a custom kernel galaxy y can b overclocked to 1.248 GHZ
Click to expand...
Click to collapse
Use merruk kernel. But it is very buggy.
Sent from my highly pimped Galaxy Pocket.
1. Love doesn't need any reason.
2. Wanna speed up 3G (not 4G LTE)?
Here it is:
http://forum.xda-developers.com/showthread.php?t=2586876
Am I losing data
Hello!
I'm on Savie #73 kernel and Hyperion 8 GM Final and I'm wondering do I really need to wipe cache and data because I don't want to lose data. I know that there is no big difference after overclocking but I would like to try. I have read that some people have ended to a bootloop after this guide. Is that bacause they didn't wipe cache and data?
And yes, I have done nandroid backup but it is not gonna bring linked apps (by link2sd) back...
Use black reactor kernel or Jarvis the stock version and flash them normally
Sent from my GT-S5360 using Tapatalk 2
mohamedrashad said:
Use black reactor kernel or Jarvis the stock version and flash them normally
Click to expand...
Click to collapse
you
I don't understand. Are you saying that black reactor and jarvis (the stock?) include the possibility to overclock to 900Mhz like merruk have possibility to overclock to 1.2Ghz? If I flash for example black reactor kernel then I dont't need to flash the OVERCLOCK.zip file? Do you mean that after I flash black reactor kernel I can just instal setcpu and overclock my s5360?
BUT...
If I want to stay on Savie #73 can I just flash overclock.zip without wiping data and cache safely? That is what I meant last post.
Vohukain said:
you
I don't understand. Are you saying that black reactor and jarvis (the stock?) include the possibility to overclock to 900Mhz like merruk have possibility to overclock to 1.2Ghz? If I flash for example black reactor kernel then I dont't need to flash the OVERCLOCK.zip file? Do you mean that after I flash black reactor kernel I can just instal setcpu and overclock my s5360?
BUT...
If I want to stay on Savie #73 can I just flash overclock.zip without wiping data and cache safely? That is what I meant last post.
Click to expand...
Click to collapse
i tried jarvis and black reactor, just mount data in recovery and flash it, go to set cpu and over clock to 1.2 Ghz or 900 mhz
Hey, i am kinda new to android. I first had a Samsung galaxy s, and there i had no problems flashing roms. Then i would try the Omega rom on my Note 2, and started following the instructions. I flashed the rom, but nothing happened, i was still on android 4.1.1, and it was still stock samsung rom. But then my phone started acting weird, and it became very slow, and when i put it in sleep i couldt wake it up again. Then i thought i just could flash the stock samsung rom, and it would be normal again. So i flashed the 4.1.2 from France, but i still had the same problems. So now i tried the 4.1.1 Germany, but now im just stuck at the samsung logo. I can still get it in recovery and download mode. Please help me :crying:
And sorry for my english, i know it isn't the best
jesperd said:
Hey, i am kinda new to android. I first had a Samsung galaxy s, and there i had no problems flashing roms. Then i would try the Omega rom on my Note 2, and started following the instructions. I flashed the rom, but nothing happened, i was still on android 4.1.1, and it was still stock samsung rom. But then my phone started acting weird, and it became very slow, and when i put it in sleep i couldt wake it up again. Then i thought i just could flash the stock samsung rom, and it would be normal again. So i flashed the 4.1.2 from France, but i still had the same problems. So now i tried the 4.1.1 Germany, but now im just stuck at the samsung logo. I can still get it in recovery and download mode. Please help me :crying:
And sorry for my english, i know it isn't the best
Click to expand...
Click to collapse
Read and follow each instruction to the word and everything will be alright.
1.Download a ROM. I suggest Omega . Link http://forum.xda-developers.com/showthread.php?t=1915036
2. Take out ext sd card from phone and connect to pc via card reader and transfer the downloaded rom .zip file to the card .
3.Put the card in the phone.
4.Assuming the phone is switched off, press down volume + home button+ power button(in the same order) . Keep holding it till you get Samsung logo and get into recovery mode(I hope you have clockwork mod recovery)
5.choose install zip from sdcard> choose zip from external sdcard and then select the ROM .zip file and flash it.
6.The rest should be self explanatory. Do backup your efs when the installer asks to do so. When the rom is installed , reboot and then wait. The first boot takes time. At the most 15 minutes or so.
7. Enjoy
Good luck friend.
:good:
P.S. Do hit the thanx button if you find my post helpful
Before starting to install
Clear in the order-
Data
Cache
Dalvik cache
Factory reset
System
Sdcard.
This will delete the minuteset piece of rom and data from your device.
Sent From Samsung's Galaxy Note II Using Internet
Just want the stock samsung rom
zeeshanonlyme said:
Read and follow each instruction to the word and everything will be alright.
1.Download a ROM. I suggest Omega . Link http://forum.xda-developers.com/showthread.php?t=1915036
2. Take out ext sd card from phone and connect to pc via card reader and transfer the downloaded rom .zip file to the card .
3.Put the card in the phone.
4.Assuming the phone is switched off, press down volume + home button+ power button(in the same order) . Keep holding it till you get Samsung logo and get into recovery mode(I hope you have clockwork mod recovery)
5.choose install zip from sdcard> choose zip from external sdcard and then select the ROM .zip file and flash it.
6.The rest should be self explanatory. Do backup your efs when the installer asks to do so. When the rom is installed , reboot and then wait. The first boot takes time. At the most 15 minutes or so.
7. Enjoy
Good luck friend.
:good:
P.S. Do hit the thanx button if you find my post helpful
Click to expand...
Click to collapse
Hey, thanks for the answer.
I can start my phone now, but there doens't pop this box up where i can choose to put things on the internal storage. Is there a way to manual putting it in to media transfer mode or what you can call it?
YOu mean when you connect phone via USB?
YOu want mass storage mode?
zeeshanonlyme said:
YOu mean when you connect phone via USB?
YOu want mass storage mode?
Click to expand...
Click to collapse
Exactly, when i plug the USB into the computer it just charges
Enable usb debugging
Sent From Samsung's Galaxy Note II Using Internet
Did you use Desktop Odin or Mobile Odin to flash stock?
Already enabled
UtkarshGupta said:
Enable usb debugging
Sent From Samsung's Galaxy Note II Using Internet
Click to expand...
Click to collapse
I have already USB debugging on :/
AjunNg said:
Did you use Desktop Odin or Mobile Odin to flash stock?
Click to expand...
Click to collapse
I flashed it from my Computer, then it's the desktop version right?
Reboot into download mode then connect to pc. Then use odin 3.07 to flash the latest stock rom of your country.
Sent From Samsung's Galaxy Note II Using Internet
n7105?
Hey Guys,
I tried to flash MIUI for my I317 but forgot to back up. It worked fine first but then showed some bugs when I tried to reboot the device. So I remove the battery and reboot manually. Then the problem happened. My phone stopped at which showed the "MI" logo and cannot turn on.
I tried to flash back to other roms (stock rom, etc), but every rom results in the same problem, showed the logo and cannot turn on. I also relaized the in the CWM mode the device and wipe cache but when I tried wipe data it reboots by itself and stayed at the logo again!
I also tried odin but still can't solve the problem.
Does anyone know how to solve this problem? Thank you so much!!!
Re: [Q] My AT&T Note II cannot turn on after flash MIUI!!! Emergency Help Needed!!!
jszhang said:
Hey Guys,
I tried to flash MIUI for my I317 but forgot to back up. It worked fine first but then showed some bugs when I tried to reboot the device. So I remove the battery and reboot manually. Then the problem happened. My phone stopped at which showed the "MI" logo and cannot turn on.
I tried to flash back to other roms (stock rom, etc), but every rom results in the same problem, showed the logo and cannot turn on. I also relaized the in the CWM mode the device and wipe cache but when I tried wipe data it reboots by itself and stayed at the logo again!
I also tried odin but still can't solve the problem.
Does anyone know how to solve this problem? Thank you so much!!!
Click to expand...
Click to collapse
Getting into recovery is the key. If you can get there you should be ok. And try not to panic.
Is this a 4.2 rom?
Current Devices: At&t Samsung Galaxy Note, Verizon Samsung Galaxy Nexus, Asus Google Nexus 7 Super Tablet
Current Roms: cleanrom 4.7 (Note 2), AOKP (Galaxy Nexus), Nexus 7 Stock
What should I do if I can get into recovery?
Bsmith0731 said:
Getting into recovery is the key. If you can get there you should be ok. And try not to panic.
Is this a 4.2 rom?
Current Devices: At&t Samsung Galaxy Note, Verizon Samsung Galaxy Nexus, Asus Google Nexus 7 Super Tablet
Current Roms: cleanrom 4.7 (Note 2), AOKP (Galaxy Nexus), Nexus 7 Stock
Click to expand...
Click to collapse
Re: [Q] My AT&T Note II cannot turn on after flash MIUI!!! Emergency Help Needed!!!
Factory reset. Or boot into download mode and flash with Odin a stock rom
Sent from my SGH-I317M using xda premium
Your recovery went bad same happened to me a while back try to get in pc mode and flash twrp through odin
Sent from my SAMSUNG-SGH-I317 using xda premium
michael0617 said:
Your recovery went bad same happened to me a while back try to get in pc mode and flash twrp through odin
Sent from my SAMSUNG-SGH-I317 using xda premium
Click to expand...
Click to collapse
pc mode?
Listen your phones borked so forget about getting cwm or twrp...especially since you already said you tried.
Im not sure what pc mode is but right now just try to get into download mode.
This is done by holding the the home, power, and volume down button at the same time.
Ill assume you have kies but if not download kies from samsung and the current usb mode.
Kies has a new feature "emergency firmware recovery" . Click this tab.
Get your phone into download mode and when prompted push volume down again.
Takes about 15 min.
Yes you can try this via odin by flashing stock fw but I personally prefer this method. If ypu can get into dl mode it should work and theres no need to worry about the right fw, just choose the right model when asked. Att is sgh-1713 or something, just confirm.
After this you should be back to stock so just reroot and reflash cwm or twrp.
And...back your shizzle up!
Gl