Related
Hello,
I have a strange problem with my HTC Artemis (O2 XDA branded, bought in Germany, no lock)
It behaves unstable and indeterministic.
Unstable means that it crashes/stucks or turns off.
Indeterministic means that it happens when i plugg it to charger, when i'm syncing, when a phone rings, when using applications/tomtom or just i arrive to work and i find the device off.
When it crashes or i find it off, the biggest problem is to boot the device. It takes me typically 10mins, when i'm always trying to press the power button, push the reset button or unplugg the battery for a while in random order until i bring it to work.
After first crach, the device also often crashes or stucks again during the boot process.
Once, the device was so dead, that it took me two days to bring it into bootloader mode and then i could at least flash the ROM.
All these was happening with ARTEMIS TOUCH 4.01 WWE - LITE NO CUBE.
Yesterday, i switched to ARTEMIS TOUCH 4.02 WWE - LITE NO CUBE (burned FW twice) without installing any other applications and the problems are still here
My personal feeling is that it is getting every week worser.
When i bought the device (eBay), there was original FW with Win Mobile 5 on it, i immediately flashed to ARTEMIS TOUCH 3.01(?) WWE - FULL WITH CUBE, i can only remember that that time I had a problem with gsm radio - from time to time i found it stucked/off - to bring it to work i had to reset the device. So i flashed to 4.01 and this issue was away, but approx 2months ago, the above described behaviour has started and nowdays i'm fighting with it 2-3x a day.
so, can anybody help?
GiZMo
Similar here
I have a similar problem, what's really strange to me is, that as far as i can recall it started happening 2 months ago or so also!! weird huh...
my device simply reboots from time to time! even while i'm making a call.
the weird thing about these reboots is that when it comes back to live i do not have to enter my pin to enable the phone! everytime i perform a manual reboot (by software, using the pin or remove battery) i have to insert my pin to able to make a call...
i have upgraded from 3.01 full touch to 4.02 full touch about the time it started, i have now 4.02 vanilla touch but problem still occurs from time to time.
any ideas?
Im another one to join this boat!
Bought an MDA C 3, two days ago, bought of someone from gumtree.com.
Worked fine for the first hour, and then locked up - nothing on the screen, no LED. Only way to get it going was to remove battery and then press power button.
I upgraded the ROM from the original t-mob UK WM5 to mechles fine release: http://forum.xda-developers.com/showthread.php?t=371182
The lock-ups / crashes have now become rarer, on average every 4 hours (before was every 1 hour).
There is no pattern to them either, although I have saw the screen trun all corrupted just before it happens. The last one was caused when I pressed the 'start' button.
I'm on a T-Mob contract, and lost my Kaiser, got ripped of when I tryed to replace it by a tosser on here for $375 Thief on the loose thread, and was hoping my luck had changed when I bought this one!!
It is T-mob branded and I wonder if there isn't a fix on here, would T-Mob repair it under warranty??
same "issue" with no entering of PIN after reboot. But not always
GiZMoSK said:
ARTEMIS TOUCH 3.01(?) WWE - FULL WITH CUBE, i can only remember that that time I had a problem with gsm radio - from time to time i found it stucked/off - to bring it to work i had to reset the device.
Click to expand...
Click to collapse
here i found a good description of that issue:
"
Originally Posted by lasertony
I've got the same problem as !Novy, but nobody seems to have noticed his question. Are there any other guys out there with this strange problem ? I have been using this rom for a while and sometimes, without any visual warning the phone freezes up. This is particularly ennoying because there is no way to check wether it is working or not. Every other function or software keeps working ! The phone is just not receiving any calls or sms. So you can miss an entire day of calls and sms without knowing... Only when trying to call somebody the dialer says 'Dialing...' and nothing happens. No connection.
A soft reset is needed to get the phone working again.
"
btw, now i'm again trying to turn the device on, it's again stuck. grrr
Hello,
i had a few weeks ago a similar strange behaviour.
After changing the sd-card I had problems to turn the device on. After a hard reset it began to boot but hang.
The I flashed back to original O2 ROM. Then I had a unpredictable behaviour. Somtimes no sound. Sometimes I cound not be called. Sometimes Error message "no sim card". After every reset i had an other error.
Hard reset and flashing was no solution. Removing battery for less than 4 hours has no effect.
Then I wanted to send it back for repair. I took of the battery. The next day I wanted to try a last time and surprise: The device works fine without an error. Its hard to believe, but the removal of the battery for more than 8 hours was the solution.
Now I use it for 5 weeks without a problem.
regards
Andre
It is Happening to my device too!!
It stucks every 2-3 hours!Tried many of the cooked ROMs but nothing.Also tried all the radio roms for 1-2 days.still the same!
It stucks with no particular reason.SOmetimes in s2u2 sometimes when am receiving a call.... etc.
Had the pin problem too for 3-4 times!
I will try your sugestion ANDRE and we will see!
Also i will try flashing the original rom,cid unlock and then flash the cood rom twice!
Fingers crosed....
Andre1210 said:
Its hard to believe, but the removal of the battery for more than 8 hours was the solution.
Now I use it for 5 weeks without a problem.
Click to expand...
Click to collapse
didn't help
happy u
now, i will try to flash back original german o2 rom
I think mine is sorted now, thanks to a new battery.
Installed it on Wednesday and hasn't died/crashed once since then.
I did notice before that the battery was getting warm, and I stuck the handset on the vent of my AC in the car, and this seemed to make the phone more stable.
Got one from Deal Extreme or try the XDA shop.
It worked for me!!
bricked or not?
did my device get bricked?
last friday i wanted to change firmware and during step1-cid unlocking (device should never been cid locked) pda got stucked. So i unplugged it and since then i cannot turn it on or get it into bootloader mode.
the only proof of life is when I take away battery and plugg it to power supply, then the red diod turns on and off for 1/2sec.
any idea what to do?
Vinnie1 said:
I think mine is sorted now, thanks to a new battery.
Installed it on Wednesday and hasn't died/crashed once since then.
I did notice before that the battery was getting warm, and I stuck the handset on the vent of my AC in the car, and this seemed to make the phone more stable.
Got one from Deal Extreme or try the XDA shop.
It worked for me!!
Click to expand...
Click to collapse
I thought it was a battery problem too, but I've 2 batteries and both are died in the same time? I think it's too strange...
My P3300 have this problem from when it is returned from assistence and with original firmware (without other applications).
dude i think u bricked ur device i am sorry to convey such a message!
now its time for CPR go to xda wiki and try the SD flashing get ur device back to life man
http://wiki.xda-developers.com/index.php?pagename=Artemis_SD_Card_Flashing
GiZMoSK said:
did my device get bricked?
last friday i wanted to change firmware and during step1-cid unlocking (device should never been cid locked) pda got stucked. So i unplugged it and since then i cannot turn it on or get it into bootloader mode.
the only proof of life is when I take away battery and plugg it to power supply, then the red diod turns on and off for 1/2sec.
any idea what to do?
Click to expand...
Click to collapse
jahrami said:
dude i think u bricked ur device i am sorry to convey such a message!
now its time for CPR go to xda wiki and try the SD flashing get ur device back to life man
http://wiki.xda-developers.com/index.php?pagename=Artemis_SD_Card_Flashing
Click to expand...
Click to collapse
but i cannot get into bootloader mode so no flashing from SD card or PC
bricked device
so my device ist still dead
is there any possibility to hard flash bootloader (when corrupt)? or the only way is to change the mainboard?
GiZMoSK said:
so my device ist still dead
is there any possibility to hard flash bootloader (when corrupt)? or the only way is to change the mainboard?
Click to expand...
Click to collapse
the good sign are the leds that means you have a very good chance...the guy made the piont...check the wiki
random crashes are often caused by hardware malfunction...sometimes the connection on the motherboard stuck,get broken or make a short-circuit...so check the hardware
Hey guys, i just got a new T-Mobile Dash and it's started acting up from day 2. Turned it on today and it doesn't work, it doesn't get past the Windows Mobile screen (from what i've seen this looks like a fairly common issue). After reading around i've tried to flash to numerous roms but only 2 of the official t-mobile roms have worked (others gave error 270, wrong vendor, wrong device, etc) but still the phone doesn't get past that screen. I've tried to do the hard-reset trick a bunch of times and still no go, any clues? Thank you.
hacktek said:
Hey guys, i just got a new T-Mobile Dash and it's started acting up from day 2. Turned it on today and it doesn't work, it doesn't get past the Windows Mobile screen (from what i've seen this looks like a fairly common issue). After reading around i've tried to flash to numerous roms but only 2 of the official t-mobile roms have worked (others gave error 270, wrong vendor, wrong device, etc) but still the phone doesn't get past that screen. I've tried to do the hard-reset trick a bunch of times and still no go, any clues? Thank you.
Click to expand...
Click to collapse
Take out the memory card and try to boot her up. If that does not work.. call T-Mo and get a new one
To get past the error 270, download the SDA Unlock app. That should get you past the error there. As for not getting past the Windows screen, I had that problem too. You should be able to get it working by hooking it up to the charger. I found that my Dash was not reading the battery as having a charge. I am not sure if I have solved the overall problem yet but, just in case, you might avoid using the USB as a charger and go with the wall charger. Just keep it on the USB long enough to sync and unplug.
Hope that helps
hacktek said:
Hey guys, i just got a new T-Mobile Dash and it's started acting up from day 2. Turned it on today and it doesn't work, it doesn't get past the Windows Mobile screen (from what i've seen this looks like a fairly common issue). After reading around i've tried to flash to numerous roms but only 2 of the official t-mobile roms have worked (others gave error 270, wrong vendor, wrong device, etc) but still the phone doesn't get past that screen. I've tried to do the hard-reset trick a bunch of times and still no go, any clues? Thank you.
Click to expand...
Click to collapse
do a hard reset hold da 2 soft keys and press the on button keep holdin da soft keys until u see a screen asking u do u want to do a hard reset hope dat works
Thanks for the responses guys but i've already tried all that. The only thing i haven't been able to try is do a hard reset with the wall charger plugged in, for some reason it doesn't matter how many times i do the steps it never shows me the black screen. I might be on the same boat as you because the battery i got with the phone is some cheap counterfeit chinese crap. I'll keep trying to get to the black screen with the phone plugged in but any other help would be greatly appreciated.
Btw, i can't do anything with T-Mobile because this is an unlocked phone i got somewhere else and can't return it so i'm stuck trying to make it work.
Check sticky to make sure doing correctly
Hard-Reset & Bootloader there is 2 x options there.
I was doing it right.
So after a million retries i got the phone to boot and do the cold boot thing. Then, i did the usual steps for putting a newer rom with WM6.1 on it (RUU_Excalibur_WM61_Kavana_080408_WWE). It worked, rebooted and went into the home menu, i thought i had brought it back from the dead until i inserted the sim. I got the sim failure message and when i pressed done it crashed. Now it won't go into the home menu no matter if the sim is inserted or not. Already tried to see if the sim was making good contact by putting pressure on it, no change.
This is too frustrating.
Ok so i've semi gotten it to work by booting it up without a sim, turning flight mode on, inserting the sim and then turning flight mode off. I get asked for my pin, the phone registers and i can make/receive calls. The problem is that a) it eventually loses the connection and b) i don't want to be doing this every time i turn the phone on.
Any ideas?
Is anyone else having the problem where after a soft reset(or a manual shutdown/restart) touchflo3d doesn't autostart?
It happens to me about 50% of the times I reset, but I jus thave to switch it off again and on again and usually it works fine.
Totally different, but I have this sometimes with Touch Flo 2D on my TyTn II. I usually get it if I've installed to much, It always launches if I haven't got the Micro SD card in though.
I've had this happening to me since I got it, and after a few hard resets it still happens... Seemingly at an increasing frequency too.
Yup, I'm experiencing the same problem.
It's really annoying, and more people are having this issue.
There's already a thread about this.
What works for me most of the time is this:
- Disable TF3D in settings.
- Soft reset device with power button
- Enable TF3D again
- Sometimes TF3D starts now, but if not reset again.
I can't wait for a more stable and fast cooked rom
Hope this helps
Oh Sorry, I couldn't find the other thread. I just keep resetting and hopee it randomly decides to starts. Love this phone, just a few things that really annoy me
The inability to find a way to make it autolock(not standby) after X seconds for example. If anyone can help with that, I'd greatly appreciate it.
aiaob said:
Oh Sorry, I couldn't find the other thread. I just keep resetting and hopee it randomly decides to starts. Love this phone, just a few things that really annoy me
The inability to find a way to make it autolock(not standby) after X seconds for example. If anyone can help with that, I'd greatly appreciate it.
Click to expand...
Click to collapse
DId you install any apps?
These kind of problems are mostly caused when 2 programs interfere with eachother. Teh reason why one time it does start up and the other time it doesn't is the sequence of programs starting up. Most of the time touch flow 3d will start later (because it's so big)
i have had this happen a couple of times as well.
quarintus said:
DId you install any apps?
These kind of problems are mostly caused when 2 programs interfere with eachother. Teh reason why one time it does start up and the other time it doesn't is the sequence of programs starting up. Most of the time touch flow 3d will start later (because it's so big)
Click to expand...
Click to collapse
I doubt it's caused by that. I've hard reset it installed core and tomtoma nd had it happen..
and I'm sure it's not just slow to start up, I've tried making calls and simply leaving it for 10 minutes and it still doesnt start up.
It only started haooening to me after I instaled software.
I guess the best thing to do right now, is to install all software with touchflo disabled, then reboot completly the device to finalize the instaltion, and then reboot it again. Now you can reactivate Touchflo again.
This "trick" has worked perfectly on my Pro 2
HastaSSSS
disable startup
Many programs that you install will leave a startup file in the windows\startup directory. Try cutting and pasting them to some temporary directory. I did that with poutlook and slovoed and the problem has gone away for me, without in any way impairing my calendar/contacts or slovoed functioning.
I got the same problem too.. soft resetting a few times do it or disable/re-enable on Personal-Today Items screen
Kinda annoying
Same problem here. Spoke to HTC today and tol them there were more people having this problem. Mine is so serious that it won't start at all! HTC says I was the first and ONLY one in the world with this problem. They told me that if there were more people having this issue they should CALL HTC. It's free to call them... please do so in finding a solution!
Thanks!
I am suffering under the same issue! It is really annoying! HTC should immediately sovle this problem!
Sounds a bit like my thread here: http://forum.xda-developers.com/showthread.php?p=3950507
I copied manila.exe from windows to my start-up folder, now it works fine.
yeah i have the same problem its really annoying. it works about 90% of the time now when i copied the manilla.exe to start up folder. before that i tried to put the phone in airplane mode before booting but that worked like half of the time.
Schijthoos said:
I copied manila.exe from windows to my start-up folder, now it works fine.
Click to expand...
Click to collapse
Does the time on the tf3d homescreen update ok when you use the manila.exe shortcut?
touch flor not loading
My phone is hanging again. I can't get it to load Touch Flo 3D. I get this message that it's trying to activate handsfree network and then it says connected and reboots and goes through the same thing 2 or 3 times. I hard reset back in Dec cause of this and then the same thing happened again about a month ago and out of the blue it loaded touch flo and fixed itself.
But this time it's been a couple days and my phone is so slow it's crazy. It's been trying to remove one program for 20 minutes. I thought removing a few programs might help instead of doing another hard reset but it looks like i'm gonna have to do one more.. I haven't added anything new lately. And I even got a message saying your phone can not boot up because of a program from an untrusted source or something else and it wants me to hard reset. It says press volume up to reset or any key to continue and then it goes to that hands activation screen.
Iv'e tried enableing and disabling bluetooth. Sprint store said I have a bad phone cause of that hands free actication message I keep getting and they want to order me aother phone but it's going to be a refurb so I guess i'll hard reset.. Something is causeing it to hang and not load and I don't know what it is.. But I came here and I tired puttingmy phone in airplane mode and rebooted nothng. I have unchecked and checked touch flo and rebooted..
But I went to windows and saw manilla.exe cause you guys said copy it to start up and I clicked on it and I saw my background and clock again but I don't think Touch Flo fully loaded and my task manager wasn't at the top and I ran clean ram cause it was still slow and it said it freed up 32mb but then my screen went black again. I put it in airplane mode once more and took out the battery. But when I never pasted the manila to start up should I do that? I just clicked on it and saw where my clock and background were back but my clock was off by like 15-20 minutes.. I'm sure I'll probablyt have to hard reset but wanted to ask around a couple more times before doing one.. Rose
I was sitting in my den and my friend said he texted me but I didn't get it. I went to check my phone and it seemed ok but no text. I then went to make a phone call and it hung. I went to turn it to airplane mode and it froze. When I restarted it, now I get the black screen with the top and bottom menu bar but no touchflo 3d loading. I get some weird hands free activation message and then it says successful and reboots my phone. When the phone starts back up it is in the same condition without touchflo 3d and the reboot loop continues unless I click cancel.
If I run manilla.exe it will boot up and my today screen will come back but it is SLOW and it doesn't seem to have completely loaded.
WTF happened and how do I fix this?
Same thing happened to me.. Touchflo wouldn't load phone was so slow hands free message kept coming and saying connected and rebooting. I did a hard reset and was good for a couple months then out of the blue on day it did it again. I turned off phone and left battery off overnight and just got lucky and the next day as I was getting in my car it came back on.
But then a few weeks later it did it again and I took it to a Sprint store. I was told that the handsfree activation is something that only happens once when you 1st get a new phone and they said my phone was defective. They were going to order me another one but it was going to be refurbed so I never picked up and just dealt with a hard reset once again. Don't know what causes this but I've had my phone reset for over a week and I just now tonight started putting apps back on cause I was afraid ut had to do with something I installed I really don't know what causes it.. But my touchflo wouldn't load at all compeltely black screen no today screen at all and boy was my phone slow. I went to windows and clicked on manilla.exe also and saw my today screen but it was still slow and not completely loading up to touchflo like you said. And then I read about putting it in airplane mode turning off BT nothing worked for me this last time so I did a heard reset again..
Maybe someone else knows what causes this but I'm leary and am not going to put everything back on my phone that was on there but I've put most everything back.. Sorry I wasn't much help but same thing for me hands free siad connected and would reboot and over and over.. I kind of want an Android phone now and I don't think Sprint should of offered me a refurb when I just bought this in Sept and it's an expensive phone. But oh well things happen.. Good Luck!
killerz298 said:
I was sitting in my den and my friend said he texted me but I didn't get it. I went to check my phone and it seemed ok but no text. I then went to make a phone call and it hung. I went to turn it to airplane mode and it froze. When I restarted it, now I get the black screen with the top and bottom menu bar but no touchflo 3d loading. I get some weird hands free activation message and then it says successful and reboots my phone. When the phone starts back up it is in the same condition without touchflo 3d and the reboot loop continues unless I click cancel.
If I run manilla.exe it will boot up and my today screen will come back but it is SLOW and it doesn't seem to have completely loaded.
WTF happened and how do I fix this?
Click to expand...
Click to collapse
Hello there. I have to write this again becuase the last topic I wrote didnt get posted...
I have a big problem with my G3 and I have tried everything I could but nothing helped so I hope you can help me.
First of all my phone is only stock. I didnt try rooting it or installing custom roms on it.
Heres the whole story of what happened:
A week ago my phone started to act strangely. When I tried turning the wifi off it restarted or froze for a bit and then went on normaly as if nothing happened. I didnt even have to input my pin. Then one day I got home and the phone simply started reseting itself constantly. Always loaded up to the pin screen but I didnt even have time to input the pin and it reset it self again. This went on for like 15 reset before I lost patience and pulled the battery which didnt help at all since after being turned back on it went back to the reseting. I found online that it was probably a battery problem but I was impatient (shipping to my country is over 2 weeks and buying a battery in stores here costs twice the normal price of a genuine battery but only for a "fake" battery) so I factory reseted it via power button+volume down. After that it worked normally but I lost all my data.
The day after this I spilled ice tea on the phone. I opened it, cleaned it and let it dry out. Turned it on after an hour of drying and it worked but after maybe 2 hours it began freezing. When I tapped on the screen it didnt react, when I pressed the power button it took more then 10 seconds to react to it. It turned on, didnt react to touch and then in mere seconds it went dark and then turned off. I couldnt even unlock the screen. Tried pulling the battery but then it wouldnt even turn on. It stayed on the LG logo. I left it on the logo and on the charger and after an hour or so it turned on and worked normally so I took it apart and cleaned it once more even under the screws and such and it worked after that. Until today.
The freezing problem returned. I was playing a game on it and chatting via messenger when the phone stopped reacting. I had signal, wifi, I got new notifications and basically everything on it worked but the screen didnt react to touch and when pressing the power button it took over 10 seconds to light up the screen, then it went darker and then it shut down. Couldnt do anything. After I pulled the battery it would get stuck in a boot loop for maybe 10-15 minutes and then load but the phone couldnt be used. Just as before the screen turned on with a delay but no reaction to touch whatsoever.
I tried factory reset, downgrading to a lower android version (from 6 to 4) with LGUP and lg flash tool, and I bought a new battery. Nothing worked. I managed to get it to android 4 but that didnt help either. I though it was a problem with 6 because the problem started after the update, before that I didnt have a single problem with my phone.
Now its in a state where it doesnt work. The phone is running, apps are upgrading after the factory reset and all that but I cant do anything with it. Once in a while it will work normally as if nothing but that is rare.
Could you please help ? I love this phone and I dont want to have to sell it for spare parts.
EDIT: I left the phone running to see what would happen an after several hours an error message appeared saying "Process system isnt responding". After pressing ok it worked fine. How can I fix this. I googled it but all I found was a problem with sd card (none is inside), with battery (I have a new one) and with rooting (mines not rooted).
Hi all
I restarted my watch using settings menu. Then left the watch on charge and went away. Next day found watch to be dead with black screen. I hard reset it by holding button for 10 seconds. It seemed to start but then gets stuck on start up ( at different places and different booting time, every time) Have not able to complete boot it once.
Then I thinking I am very clever, went into the boot menu and deleted cache and data. It seemed to load a bit longer than last times and actually went on to connect with phine and started update but got stuck on 20 out of 27 apps.
So every time it gets stuck, it black screens and the only way to bring it out of this state is to hold down the button for 10 seconds. It does not black screen in FASTBOOT menu. I am not sure if there is any warranty left on this watch as it was bough second hand and till now had been working really well for about 3 weeks.
I have installed adb drivers but it doesn't show up on the PC. May be because i didn't do the developer options step before I am guessing. Anyway I have no idea what is happening to the watch and if it is even recoverable or not.
Any one seen this before? any ideas what I should do?
Thanks so much
One thing that gives me confidence that battery is not dead is that if I leave it in the fastboot menu screen then disconnt the carger it stays there.
I tried sideloading Android Wear 1.4 image. It fails at 57 or 58% , always
Just a note to anyone with similar problem. My watch sorted itself out after a few days. I think , if you leave your watch on charge and don't touch it for two days then it somehow help. I am not sure how it started working. My suspicion is that the watch either had water in it that dried out over two days or the charge had somehow gone so low that it needed a very long charge to stabalize. Anyway, it works now.