Develop Bugs

Baked snack kernel

Can I use baked snacks kernel on a different Rom? I'm looking to improve battery life

I don't see why not. Nand backup and go for it.

EVOme said:
I don't see why not. Nand backup and go for it.
Click to expand...
Click to collapse
Is that what makes it have good battery?
Sent from my PC36100 using XDA App

Rocklee99 said:
Is that what makes it have good battery?
Sent from my PC36100 using XDA App
Click to expand...
Click to collapse
what? doing the nand backup? that's just in case the kernel doesn't work you can restore to the previous condition your phone was in (so do it before you flash baked's kernel)
I'm not sure if his kernels will work on other roms though, I think I tried once

I've used it on my ROM what ROM are you using that might help.

mistersquirrle said:
what? doing the nand backup? that's just in case the kernel doesn't work you can restore to the previous condition your phone was in (so do it before you flash baked's kernel)
I'm not sure if his kernels will work on other roms though, I think I tried once
Click to expand...
Click to collapse
No I meant is the kernel what gives better battery, BTW I'm using ava froyo Rom v8
Sent from my PC36100 using XDA App

Rocklee99 said:
No I meant is the kernel what gives better battery, BTW I'm using ava froyo Rom v8
Sent from my PC36100 using XDA App
Click to expand...
Click to collapse
Yes the kernel can help with battery life. You should be ok with flashing a different kernel and that ROM but as posted do a NAND backup before flashing the kernel.

Does anyone know how good the battery is for baked snacks kernel and does anyone know where I can find his kernel #6 ?
Sent from my PC36100 using XDA App

Rocklee99 said:
Does anyone know how good the battery is for baked snacks kernel and does anyone know where I can find his kernel #6 ?
Sent from my PC36100 using XDA App
Click to expand...
Click to collapse
#6 has never been available for download. I used BS 1.7 on NA 4.19 and my battery was day and a half if not better with average use...seriously. I was amazed. I tried all the baked kernels and nothing worked like that.
Now I am on BS 1.8 using the same kernel and not getting near the same batt life.

EVOme said:
#6 has never been available for download. I used BS 1.7 on NA 4.19 and my battery was day and a half if not better with average use...seriously. I was amazed. I tried all the baked kernels and nothing worked like that.
Now I am on BS 1.8 using the same kernel and not getting near the same batt life.
Click to expand...
Click to collapse
NA as in netarchy?
Sent from my PC36100 using XDA App

Baked Snack
I have no clue how you guys are doing it, but I have the 1.7 version with kernel 6.
I took it off the charger this morning (after a full charge), it is now almost dead, with very little use.
How do you guys do it? Your not shopping the images are you?

This is a newb question I know, I have searched all over the forums. i have the stock rom and am not interested in any of the roms since most of them seem to not have 4g working or some other things( cant wait until they do!). My question is how do I flash just the kernel? i have never flashed anything before and I just backed up everything with rom manager. thanks!!!

mcskibadee1 said:
This is a newb question I know, I have searched all over the forums. i have the stock rom and am not interested in any of the roms since most of them seem to not have 4g working or some other things( cant wait until they do!). My question is how do I flash just the kernel? i have never flashed anything before and I just backed up everything with rom manager. thanks!!!
Click to expand...
Click to collapse
Wipe cache, wipe dalvic, flash like you would a Rom. Don't forget to nand first.
Sent from my blah blah blah blah
Edit - I'm assuming there's a specific kernel you have that you want to flash, and you didn't mean how to extract the kernel from a full Rom - also just noticed that you said you already backed up with rom manager. You may want to consider backing up manually through recovery or using amonra instead - nobody seems to know what exactly rom manager wipes when you tell it to wipe.

mcskibadee1 said:
This is a newb question I know, I have searched all over the forums. i have the stock rom and am not interested in any of the roms since most of them seem to not have 4g working or some other things( cant wait until they do!). My question is how do I flash just the kernel? i have never flashed anything before and I just backed up everything with rom manager. thanks!!!
Click to expand...
Click to collapse
i think you're misinformed (or haven't searched hard enough) - most, if not all, sense based ROMs have everything working and some (i.e. wireless/usb tether, performance/efficiency tweaks, etc.). it's the cm/aosp roms that don't have everything working (yet).
flashing kernels is similar to flashing roms. there is a plethora of threads on the topic. read some of the stickies and many of your questions will be answered to get you started with flashing roms/kernels.

edit: sorry i never know about this is paid version i tooked from his old xda thread, BTW thanks for let me know about that

quocamole said:
i think you're misinformed (or haven't searched hard enough) - most, if not all, sense based ROMs have everything working and some (i.e. wireless/usb tether, performance/efficiency tweaks, etc.). it's the cm/aosp roms that don't have everything working (yet).
flashing kernels is similar to flashing roms. there is a plethora of threads on the topic. read some of the stickies and many of your questions will be answered to get you started with flashing roms/kernels.
Click to expand...
Click to collapse
I have been on this forum for weeks trying to decipher all the lingo. I have not seen any Evo roms that have the 4g working, If i did I would have just used one of those.Trust me, i have searched all over this forum and others before bothering or asking stupid questions. Maybe I am searching the wrong stuff, I will search for sense based roms, thank you.
Also, I have never flashed anything before. Still trying to figure that one out. Thanks for the info guys!

mcskibadee1 said:
I have been on this forum for weeks trying to decipher all the lingo. I have not seen any Evo roms that have the 4g working, If i did I would have just used one of those.Trust me, i have searched all over this forum and others before bothering or asking stupid questions. Maybe I am searching the wrong stuff, I will search for sense based roms, thank you.
Also, I have never flashed anything before. Still trying to figure that one out. Thanks for the info guys!
Click to expand...
Click to collapse
here you go:
http://forum.xda-developers.com/forumdisplay.php?f=653
all roms are there. aosp roms are usually the roms where everything is not working.
general steps to flashing (but always read the post from the developer for any special instructions):
1. download file to sd card
2a. get into recovery (either via quickboot app or via powering down then holding volume down button while powering up)
2b. navigating in recovery - volume keys to change selection, power button to select
3. nand backup
4. wipe data, cache and dalvik (only wipe cache and dalvik if you're flashing a kernel)
5. flash the rom/kernel you downloaded
6. reboot
7. drink beer
if something goes wrong, get back into recovery and restore your nand backup.
hope this gets you started.... but read, read, read.
good luck.
sorry OP - back on topic. did you wipe cache and dalvik before flashing the kernel? what's your up time and awake time (found in settings>about phone>battery). do you have any monitoring apps installed (i.e. system panel, android system info? you may have rogue app.

juancaperez2000 said:
here is the baked snak kernel 6 if you want it
Click to expand...
Click to collapse
No offense but this is why Hero quit providing stuff at xda...Thanks though

juancaperez2000 said:
here is the baked snak kernel 6 if you want it
Click to expand...
Click to collapse
good on you removing the link

Thank you quocamole, that helps.

Question about AOSP roms

Every non-Aosp rom I've ever flashed (Acs, bonsai, midnight, simply aosp, viper, et..) have always ended up freezing and forcing me to remove the battery to re-boot, I've followed instructions, re-downloaded the roms etc. CM7 and MIUI, both Aosp, have never had that problem, always flashed right the first time, never had to flash twice. I guess I'm just curious if anyone can explain why aosp roms work fine (minus mms, 4g, and the other aosp bugs) and every rom based off of official releases always seem to end up failing?
Sent from my Samsung-SPH-D700 using XDA App

wrong section man, this is not development (it will be moved soon).
If you are following instructions to the point in ROM guides, I have no idea. Sorry. But more specifics on your problems would help us help you

Its because most of the non aosp roms are backing up and restoring your data. If your coming from a clean flash you have to flash the rom twice before it will boot up properly.
And yes this belongs in the q&a forum
GituSum Epic 4G

GituSum said:
Its because the non aosp roms are backing up and restoring your data. If your coming from a clean flash you have to flash the rom twice before it will boot up properly.
And yes this belongs in the q&a forum
GituSum Epic 4G
Click to expand...
Click to collapse
Not to sound like an ass, but that's not entirely true. I have never had to flash non-aosp roms more than once.

djbacon06 said:
Not to sound like an ass, but that's not entirely true. I have never had to flash non-aosp roms more than once.
Click to expand...
Click to collapse
Even after an odin? Cause I've had to every time. If I'm just going between two roms I don't. Maybe my phone is just picky
GituSum Epic 4G

GituSum said:
Maybe my phone is just picky
Click to expand...
Click to collapse
I think that's it for sure. This phone literally has a mind of its own and every one is different. Just like people???
But yeah, even after clean ODIN installs it works fine first flash. Did that today as a matter of fact

djbacon06 said:
I think that's it for sure. This phone literally has a mind of its own and every one is different. Just like people???
But yeah, even after clean ODIN installs it works fine first flash. Did that today as a matter of fact
Click to expand...
Click to collapse
Then ya mine is picky. I flashed EE03 last night and used odin to go back to froyo today and had to flash twice before it booted up. No big deal just an extra couple minutes to flash and boot up
GituSum Epic 4G

GituSum said:
Then ya mine is picky. I flashed EE03 last night and used odin to go back to froyo today and had to flash twice before it booted up. No big deal just an extra couple minutes to flash and boot up
GituSum Epic 4G
Click to expand...
Click to collapse
Haha you're not the only one! On DK28 I had to flash twice everytime! And then for a little while on EB13. I don't know what changed though. But I havent had to do it for a longtime. Maybe it's because I never boot into stock before flashing?

It mainly jas to do with us having a crappy recovery.
Sent From My Evo Killer!

djbacon06 said:
I think that's it for sure. This phone literally has a mind of its own and every one is different. Just like people???
Click to expand...
Click to collapse
UH OH are you ACS guys developing AI and secretely putting it in our phones? hahaha

Even from a fresh odin, all other roms end up freezing, CM7 or MIUI I can flash over anything, and they always work, everytime.
Sent from my Samsung-SPH-D700 using XDA App

Flash srf and then vision 1.1 over it. Post in the right sub-forum.
Sent from my SPH-D700 using XDA App

Skimp Killah said:
Even from a fresh odin, all other roms end up freezing, CM7 or MIUI I can flash over anything, and they always work, everytime.
Sent from my Samsung-SPH-D700 using XDA App
Click to expand...
Click to collapse
I experience this to an extent as well.. w/ SRF 1.0.2 it flashes first time and works flawlessly..
What I've found is that all devices aren't created equal. Some work really well others are finicky.
What I've found that works for me is immediately after a flash, I can tell if it's gonna be wonky or work. After the flash, if it 'delays' before popping back up to the recovery menu, it's gonna fail. If the recovery menu pops up right away I'm good.
When it 'fails'.. I'll reboot system.. on the white samsung screen, pull the battery. boot back into recovery, then re-flash. boot system if it doesn't auto boot and you're good.
Not sure why it's like this, but it works for me. MY device doesn't always play nice w/ every version of every ROM and rather than whining in all of the ROM threads about why the rom sucks and I can't use it.. I've figured out a way to use them through troubleshooting and process of elimination using some of the 'fixes' that are posted in the different threads.
all Epics are not created equal. Just gotta figure out what works for yours.
EDIT: now that I think about it, (not that it's a big deal) I'm gonna go find noobnl's thread about checking for bad blocks on the ONEnand... just curious if journaling is trashing my NAND (I don't think it is, but ya never know)
EDIT: Still only 3 bad blocks. Nothing to worry about for me

spyder09 said:
UH OH are you ACS guys developing AI and secretely putting it in our phones? hahaha
Click to expand...
Click to collapse
LOL, I am by no means developing anything for ACS. I'm not a developer, just an advocate
And knowing how k0nane does things, there would be absolutely no trace of something like that in ACS roms

Try ec05plus its an odin tar, and it will work from the first boot...
Sent from my SPH-D700 using XDA App

GituSum said:
Its because the non aosp roms are backing up and restoring your data. If your coming from a clean flash you have to flash the rom twice before it will boot up properly.
And yes this belongs in the q&a forum
GituSum Epic 4G
Click to expand...
Click to collapse
That's not true. He mentioned Simply which I know for a fact doesn't backup/restore data.
1.) Odin back to EC05
2.) Re-root and Install CWM3
3.) Let it convert you to EXT4
4.) Upgrade to CWM 3.0.2.5
5.) Wipe data.
6.) Go to Advanced/Mounts and hit Format /system
7.) Flash the rom of your choice
8.) If it fails again wipe data x3 and then system x3 for good measure, try try again.
Hope that helps.
Pst make sure to use the proper section next time

Still not sure why this is in development.

k0nane said:
Still not sure why this is in development.
Click to expand...
Click to collapse
Won't be for long, about to pm impaler unless you already have.
Sent from my SPH-D700 using XDA App

TheDub said:
That's not true. He mentioned Simply which I know for a fact doesn't backup/restore data.
1.) Odin back to EC05
2.) Re-root and Install CWM3
3.) Let it convert you to EXT4
4.) Upgrade to CWM 3.0.2.5
5.) Wipe data.
6.) Go to Advanced/Mounts and hit Format /system
7.) Flash the rom of your choice
8.) If it fails again wipe data x3 and then system x3 for good measure, try try again.
Hope that helps.
Pst make sure to use the proper section next time
Click to expand...
Click to collapse
Iv'e tried everything listed other than upgrading to the newest CMW, I'm thinkin I'm just gonna have to wait for CM7 or MIUI to have mms and what not.
Sent from my Samsung-SPH-D700 using XDA App

Moved to Q&A.

Clean GB MTD issues

Ive tried 3 times to switch to mtd heres my steps I must be doing something wrong please point it out for me.
Step 1: odin to deodexed/rooted ec05
Step 2: eco5 modem to ei22 converted
step 3: upgrade to newest cwm5
step 4: Wipe data/cache/delvik 3x
step 5: Install MTD Clean rom/ Also tried CM7
Outcome: first seems fine restarts back to cwm5 Im assuming that means its converted to mtd? (should i reflash rom after restart to cwm5?) Then I reboot system and the screen just stays black nothing happens waited forever forceing me to odin again and repeat the steps with no luck over and over again. I have also tried installing clean rom + a different MTD Kernal. Still just a black screen buttons lit up and no sign of life I waited nearly half an hour leaving the phone like this and nothing happened.
Odin is a pain it takes 5 failured to reodin I figured id ask the pros since i want MTD and need to figure this out. Please tell me im missing something obvious and make it a simple solution lol Thanks for your help.

When you flash an MTD ROM, the phone will restart during the flash and should reboot and continue to install. Once that is done it should say install successful in CWM. Is it doing that?

I install in cwm5 it shuts off reboots back to cwm5 and thats it at that point i find myself lost and reboot to system and get black screen. Do my steps look right nothing special i have read all comments and see no issues so i feel pretty slow because i never have these problems and couldnt find a similar one.
If it helps me explain better when i installed CM7 I got as far as the CM7 loading screen and then it froze. So I tried to wipe then install clean MTD to see if it would load either and got black screen right after CM7 logo......Ill try again in a minute I just want someones help first before I try again. Then i will post new info about my issue if it continues and we can figure out what im missing.

When you odin you says it fails? You need a better cable also you converted to mtd but it won't boot so when you go back to stock you need to repartition so have that checked. Also don't go back to stock rooted go back to official stock ec05 not anything but that please. Then once done flash in a custom recovery and flash the ei22 modem conversion and finally wipe data cache and dalvik *once* and flash the mtd rom. Then it will reboot almost half way through and then it should say install complete and it will reboot your system.
Sent From My Cyan Samurai

Ok im going again to try after reading your post ill edit this reply with my outcome after my attemp Im using my 4g for internet so it will take a few minutes to get back here to respond.
Ok ive tried it all nothing helps reflashed on MTD even still boots back to cw5.
I did however download from the xda app I seen some threads on this. Is it possible thats the reason? I usually download roms from it and they work fine but my 16gb is running low. Im going to try again from a laptop download then transfew to microsd on sd adapter and see. I tried it all how do i check md5?
Also i was trying to flash cm710 so im not sure if that has a issue but ill try not downloading from XDA app because im really tired of starting from scratch with this phone. sm7 i see boot logo and resets to cwm5 Clean MTD i see only black screen and it resets to cwm5.

I had to do a factory data reset right before flashing CM7 otherwise I also got stuck at the circle load thingie.
Sent from my SPH-D700 using XDA App

kennyglass123 said:
I had to do a factory data reset right before flashing CM7 otherwise I also got stuck at the circle load thingie.
Sent from my SPH-D700 using XDA App
Click to expand...
Click to collapse
That was going to be my next suggestion to wipe data cache and dalvik and reflash once on mtd.
Sent From My Cyan Samurai

JavaKid said:
Ok im going again to try after reading your post ill edit this reply with my outcome after my attemp Im using my 4g for internet so it will take a few minutes to get back here to respond.
Click to expand...
Click to collapse
Also you may have a bad doownload. Check the md5 on the rom and compare to your download...
Sent from my SPH-D700 using Tapatalk

Well I never solved the issues with mtd cm7 and clean rom..... But I did manage to get to MTD very easily using marcusant v3 rom then added red theme and all is well. So in short who knows what was up after trying everything but if anyone else has that issue.....give up lol I needed a lot of asprin getting through tht mess. marcusant v3 MTD is amazing with red theme its boss.
edit: Dont give up lol use dolphin browser and redownload worked like a charm I dont want to discourage anyone as I like to try every rom atleast once. Plus clean GB has stable wifi hack with 4g on.
Sent from my SPH-D700 using XDA App

JavaKid said:
Well I never solved the issues with mtd cm7 and clean rom..... But I did manage to get to MTD very easily using marcusant v3 rom then added red theme and all is well. So in short who knows what was up after trying everything but if anyone else has that issue.....give up lol I needed a lot of asprin getting through tht mess. marcusant v3 MTD is amazing with red theme its boss.
Sent from my SPH-D700 using XDA App
Click to expand...
Click to collapse
It was probably some bad downloads. If you want to try CM7 I only was able to get it to flash with a Factory Data reset prior to flashing it. You should grab one of the nightlies from 10 and up with the working 4G toggle.

Well i was dedicated to resolving this after realizing sleeperrom mtd and Marcusant MTD had broken wifi when 4g was enabled. So yeah i resolved the issue by downloading with dolphin browser mini worked like a charm for some reason that browser is the only reliable one for me to download roms. Switched to clean gb 4g wifi hotspot is perfect. Also if anyone knows if hotspot with 4g is broken in cm7 mtd what tether app with 4g tether will work with an epic?

JavaKid said:
Well i was dedicated to resolving this after realizing sleeperrom mtd and Marcusant MTD had broken wifi when 4g was enabled. So yeah i resolved the issue by downloading with dolphin browser mini worked like a charm for some reason that browser is the only reliable one for me to download roms. Switched to clean gb 4g wifi hotspot is perfect. Also if anyone knows if hotspot with 4g is broken in cm7 mtd what tether app with 4g tether will work with an epic?
Click to expand...
Click to collapse
Working copy of wireless tether for cm7 > http://db.tt/Q6n9nOge
Open and before you start the tether change the first two settings... 1. Change to epic 4g... 2. Change to softap... I use this on EVERY ROM I run... turn on 4g after the app starts up...
Sent from my SPH-D700 using Tapatalk

Wow your a life savor im definately trying that out today. For cm7 do you have to start fresh though or can you clear then flash over clean gb mtd? Your getting a thanks I have been up and down the market and nothing worked and no trials to see if certain programs work that cost 12 bucks a pop so this info is very valuable to me thanks.

Marcusantrom v3 fixed the 4g tethering
Sent from my SPH-D700 using XDA App

[Q] Bluetooth Won't Enable after flashing new ROM

I've tried enabling the bluetooth both thru the pull down button and through the settings menu. It acts like it's starting to turn on, and then after a few seconds, just goes dark again.
Tried reboot. No luck.
Used ACS Recovery to do a pre-ROM wipe before flashing the new ROM.
Can't post in developers forum yet, so hopefully someone here can help. I read every page and every entry in the applicable forum for the ROM I flashed, but no one reported this problem or solutions.
Any ideas? I'd rather not have to flashback to stock or whatever. I've seen plenty of helpful posts for other bugs in the ROM. Just nothing for this. HELP!
Thanks,
Epic 4g
Gingerbread 2.3.5
ROM Revival MTD v2

JrWicked said:
I've tried enabling the bluetooth both thru the pull down button and through the settings menu. It acts like it's starting to turn on, and then after a few seconds, just goes dark again.
Tried reboot. No luck.
Used ACS Recovery to do a pre-ROM wipe before flashing the new ROM.
Can't post in developers forum yet, so hopefully someone here can help. I read every page and every entry in the applicable forum for the ROM I flashed, but no one reported this problem or solutions.
Any ideas? I'd rather not have to flashback to stock or whatever. I've seen plenty of helpful posts for other bugs in the ROM. Just nothing for this. HELP!
Thanks,
Epic 4g
Gingerbread 2.3.5
ROM Revival MTD v2
Click to expand...
Click to collapse
Backup that rom... flash a different rom... if bluetooth works then its that rom... btw I would strongly suggest not using acs recovery... use cwm 5.0.2.7... it is the officially supported recovery for our epics! Also acs does not play well with mtd roms so that may be your problem!
Sent from my SPH-D700 using Tapatalk

Get rid of ACS Recovery. It is not supposed to be used for MTD ROMs.

kennyglass123 said:
Get rid of ACS Recovery. It is not supposed to be used for MTD ROMs.
Click to expand...
Click to collapse
Bah humbug acs not play well with mtd blah!
I used it to convert to mtd when cyanogen first came and it worked just fine...... acs not the problem because even if he was on bml cwm5 before flashing he would have the same results.
Please stop blaming that recovery ^^
http://i1202.photobucket.com/albums/bb374/TexasEpic/Biggoron3.png
Sent From My Cyan Samurai

However once on mtd he shouldn't be using it
http://i1202.photobucket.com/albums/bb374/TexasEpic/Biggoron3.png
Sent From My Cyan Samurai

Biggoron said:
Bah humbug acs not play well with mtd blah!
I used it to convert to mtd when cyanogen first came and it worked just fine...... acs not the problem because even if he was on bml cwm5 before flashing he would have the same results.
Please stop blaming that recovery ^^
http://i1202.photobucket.com/albums/bb374/TexasEpic/Biggoron3.png
Sent From My Cyan Samurai
Click to expand...
Click to collapse
Maybe it worked for YOU but it is highly recommended to use CWM 5.027 to convert and note that if you want to convert and restore nandroid data it must come from 5.027.
Sent from my SPH-D700 using XDA App

kennyglass123 said:
Maybe it worked for YOU but it is highly recommended to use CWM 5.027 to convert and note that if you want to convert and restore nandroid data it must come from 5.027.
Sent from my SPH-D700 using XDA App
Click to expand...
Click to collapse
I'm pretty sire recoveries don't differ from phones... software is software its not a hardware difference just saying. How is your day going kenny?
http://i1202.photobucket.com/albums/bb374/TexasEpic/Biggoron3.png
Sent From My Cyan Samurai

Biggoron said:
I'm pretty sire recoveries don't differ from phones... software is software its not a hardware difference just saying. How is your day going kenny?
http://i1202.photobucket.com/albums/bb374/TexasEpic/Biggoron3.png
Sent From My Cyan Samurai
Click to expand...
Click to collapse
Ah always better after you brighten my day Biggie...lol.
BTW you know software is what drives the hardware. So any flash can go wrong at some point whether Odin, CWM, ACS, or Bonsai Recovery. Just sayin'...LOL. How you been?
Sent from my SPH-D700 using XDA App

kennyglass123 said:
Ah always better after you brighten my day Biggie...lol.
BTW you know software is what drives the hardware. So any flash can go wrong at some point whether Odin, CWM, ACS, or Bonsai Recovery. Just sayin'...LOL. How you been?
Sent from my SPH-D700 using XDA App
Click to expand...
Click to collapse
GRRRR.... oh me I'm good I see what your saying but how would be able to flat out blame that software for all you know it was the rom .... okay end of argument no reason to keep up this fiasco anyways I'm not saying to not use the official cwm I'm just saying you can't blame the issue on the recovery... I've had tons of bluetooth issues concerning kernels never the recovery
http://i1202.photobucket.com/albums/bb374/TexasEpic/Biggoron3.png
Sent From My Cyan Samurai

I agree...just trying to narrow down the possibilities. Probably just needed to delete some bluetooth data files. I forget which ones force the bluetooth database to rebuild.
Sent from my SPH-D700 using XDA App

BRICKED
Thank u all for the replies. I DID use ACS to do the pre-rom wipe, but I thought CWM got changed afterwards, somewhere in the process of flashing the new ROM, etc. Funny that several of you mentioned the possibility of that being the issue. I went to boot into recovery to check, and my phone bricked. #*(#@$%&. So, I had to odin back to stock and then root again, then use Titaniun just to get to my pre-ROM settings. I'm just gonna go without the custom ROM for now.

JrWicked said:
Thank u all for the replies. I DID use ACS to do the pre-rom wipe, but I thought CWM got changed afterwards, somewhere in the process of flashing the new ROM, etc. Funny that several of you mentioned the possibility of that being the issue. I went to boot into recovery to check, and my phone bricked. #*(#@$%&. So, I had to odin back to stock and then root again, then use Titaniun just to get to my pre-ROM settings. I'm just gonna go without the custom ROM for now.
Click to expand...
Click to collapse
You mean sponged, not bricked. As long as there is life you are not bricked. Just grab the official CWM 5.027 and flash that. When doing conversions like that don't use ROM Manager and all should be well. When in doubt, wipe wipe wipe.

note 2 laggy

My note has been laggy as hell lately it started a few days ago and I'm not sure why I was on goodness rom the went to Jedi x16 and am now on pacman as of today and every last one of the ROMs have the same problem force closes and freezing a lot no matter what I'm doing and YouTube is choppy also my battery doesn't charge like it used to I'll be getting the note 3 whenever it comes out in the next few months but I want this phone as my backup and as of now its the only phone I have and I need help any would be much appreciated thanks in advance I'm pretty much a noob just throwing that out there

Do you do a clean wipe every time you install a new rom? Clean wipe cache, dalvik, data, system, internal sd? Try downloading rom thru pc then transfer to your sd.
POWERED by the MASTER!

Craniotomy said:
Do you do a clean wipe every time you install a new rom? Clean wipe cache, dalvik, data, system, internal sd? Try downloading rom thru pc then transfer to your sd.
POWERED by the MASTER!
Click to expand...
Click to collapse
Yeah its weird I always do a clean wipe even when they say its unnecessary but the phone started acting up a few days ago I think it may have been after I restored to one of my old ROMs and from there the phone has just been acting really crazy its very annoying it happens most when I try to use internet app though I noticed

WzrdCuD said:
Yeah its weird I always do a clean wipe even when they say its unnecessary but the phone started acting up a few days ago I think it may have been after I restored to one of my old ROMs and from there the phone has just been acting really crazy its very annoying it happens most when I try to use internet app though I noticed
Click to expand...
Click to collapse
Only thing i could suggest is total wipe and clean and start from new downloads
POWERED by the MASTER!

Craniotomy said:
Only thing i could suggest is total wipe and clean and start from new downloads
POWERED by the MASTER!
Click to expand...
Click to collapse
Yeah I've tried that a few times with no success but thanks for your help anyway

WzrdCuD said:
Yeah I've tried that a few times with no success but thanks for your help anyway
Click to expand...
Click to collapse
What kernels are you using? Are you using set Cpu? Trickster mod? At the same time? I use set Cpu for the power profile. But for undervolt i use trickster. Or try to just use one and uninstall the other.
POWERED by the MASTER!

Craniotomy said:
What kernels are you using? Are you using set Cpu? Trickster mod? At the same time? I use set Cpu for the power profile. But for undervolt i use trickster. Or try to just use one and uninstall the other.
POWERED by the MASTER!
Click to expand...
Click to collapse
I'm currently on PAC man ROM which I believe is the cyanogen mod kernal

WzrdCuD said:
I'm currently on PAC man ROM which I believe is the cyanogen mod kernal
Click to expand...
Click to collapse
Ok. Have you tried a different kernel? I tend to stay with T-Mobile based roms.
POWERED by the MASTER!

[QUITE=Craniotomy;44367932]Ok. Have you tried a different kernel? I tend to stay with T-Mobile based roms.
POWERED by the MASTER![/QUOTE]
No i haven't actually but yeah I'm usually on Jedi x but no matter what it does the same thing

WzrdCuD said:
[QUITE=Craniotomy;44367932]Ok. Have you tried a different kernel? I tend to stay with T-Mobile based roms.
POWERED by the MASTER!
Click to expand...
Click to collapse
No i haven't actually but yeah I'm usually on Jedi x but no matter what it does the same thing[/QUOTE]
I would definitely try a different kernel. Maybe your phone can only handle stock kernels or something which Jedi doesn't use. Having a CM kernel still lingering through a flash while running Jedi can't be too good either, it's possible that's what happened? Go back to just stock rooted and see if the problem remains.

tony yayo said:
No i haven't actually but yeah I'm usually on Jedi x but no matter what it does the same thing
Click to expand...
Click to collapse
I would definitely try a different kernel. Maybe your phone can only handle stock kernels or something which Jedi doesn't use. Having a CM kernel still lingering through a flash while running Jedi can't be too good either, it's possible that's what happened? Go back to just stock rooted and see if the problem remains.[/QUOTE]
Its really weird because this has never happened before I've also never flashed a kernel my friend always scares me saying that its the most dangerous thing to do when rooting but do you have a suggestion thanks in advance

I already made a suggestion, go back to stock rooted.

tony yayo said:
I already made a suggestion, go back to stock rooted.
Click to expand...
Click to collapse
Lol sorry about that I'm really not sure what stock rooted would be is there a ROM for it like I said I'm extremely noobish and don't really know Mich beyond flashing my friend rooted my phone for me again I'm sorry

I think your better off letting your friend handle it. I dont want to suggest anything at all if you don't know what you are doing.

tony yayo said:
I think your better off letting your friend handle it. I dont want to suggest anything at all if you don't know what you are doing.
Click to expand...
Click to collapse
Sorry for the late reply but my friend is in the army he doesn't really have much time to help me with this so any suggestions I wouldn't blame you in the least if something went wrong

http://forum.xda-developers.com/showthread.php?t=2102380
That's where you will find a stock ROM. Flash the factory image with Odin. If you don't know what stock is or how to flash a kernel it's best to go back to stock and don't run custom ROMS. Just read the thread I linked and post any questions about the process in that thread.
You can flash the factory image using Mobile Odin from the Play Store and there's an option to keep root.
Sent from my SGH-T889 using xda premium

Rhiannon224 said:
http://forum.xda-developers.com/showthread.php?t=2102380
That's where you will find a stock ROM. Flash the factory image with Odin. If you don't know what stock is or how to flash a kernel it's best to go back to stock and don't run custom ROMS. Just read the thread I linked and post any questions about the process in that thread.
You can flash the factory image using Mobile Odin from the Play Store and there's an option to keep root.
Sent from my SGH-T889 using xda premium
Click to expand...
Click to collapse
Ok thanks so much

I hope it works for you.
Sent from my SGH-T889 using xda premium

Are you running custom kernels that are overclocked? Maybe your phone can't handle the overclock anymore.... it happens
Sent from my SGH-T889 using xda premium