Anyone out there disassembled the nexus yet? - Samsung Galaxy Nexus

How terribly difficult is it to remove the screen from housing? I've got some experience with disassembling electronics and what not but very nervous. I'm looking to remove just the housing to make it white. Just wondering how much prying does it take.
Thanks for the help.

sassyness77 said:
How terribly difficult is it to remove the screen from housing? I've got some experience with disassembling electronics and what not but very nervous. I'm looking to remove just the housing to make it white. Just wondering how much prying does it take.
Thanks for the help.
Click to expand...
Click to collapse
I've read that its fairly difficult. Check this out: http://www.ifixit.com/Teardown/Samsung-Galaxy-Nexus-Teardown/7182/1
Sent from my Galaxy Nexus using xda premium

I would imagine removing the glass is a lot like the galaxy s2. I used a good blow dryer, warmed up the screen (from the front) around it's edges, ran a guitar pick around it and pull it off with a good suction cup. I haven't taken my nexus apart yet, and probably won't unless I drop it in water or something else horrific happens to it.
Like a lot of smart phones, it's usually the screen that's the trickiest to remove. I don't mess with the glass unless I have to.

http://www.youtube.com/watch?v=1WqajUcI_oU

now I'm wondering if the phone in that video was already disassembled before...if its that easy, my nexus will be white asap! No harm in pulling the screws and seeing if it budges I guess
Sent from my Galaxy Nexus using XDA App

i'll post X-rays of the phone as soon as i get back to my other job i did it for the Droid Charge and figure people will enjoy the here too

Related

Earpiece grate replacement?

I accidentally scratched some black paint off of the earpiece grate while getting some dirt out. I can't seem to find a replacement grate online. I don't know if I'm searching for the wrong thing but I can't seem to find it online. Is there any way I can pick one up without purchasing a whole new display?
Sent from my Galaxy Nexus using Tapatalk
No clue.
Black Sharpie?
Flippy125 said:
I accidentally scratched some black paint off of the earpiece grate while getting some dirt out. I can't seem to find a replacement grate online. I don't know if I'm searching for the wrong thing but I can't seem to find it online. Is there any way I can pick one up without purchasing a whole new display?
Sent from my Galaxy Nexus using Tapatalk
Click to expand...
Click to collapse
The screen/bezel unit comes in one piece.
asianrage said:
The screen/bezel unit comes in one piece.
Click to expand...
Click to collapse
I see screens being sold without the grate online. It actually isn't seamless, as the grate is a metal and if you can find a way to grip it, it wiggles a little. Sharpie is starting to seem like a good idea
Sent from my Galaxy Nexus using Tapatalk
You could be the perfect candidate for THIS...
On a more serious note, I would think sharpie would just rub off eventually. If you know how to disassemble the phone, you could try repainting it, that is, if the scratch bothers you enough. lol
You can try a paint pen, like the ones used for painting small details on model cars and airplanes. Hobby shops usually carry them. Just lay down some masking tape on the glass to keep it clean while doing the painting.
xIC-MACIx said:
You could be the perfect candidate for THIS...
On a more serious note, I would think sharpie would just rub off eventually. If you know how to disassemble the phone, you could try repainting it, that is, if the scratch bothers you enough. lol
Click to expand...
Click to collapse
I just did a quick Photoshop to see how it would look but it looks kind of tacky (If I could find a replacement, I' definitely do it anyway). I might just end up painting it if sharpie doesn't work. I've already disassembled the phone out of boredom

CDMA Screen for GSM phone

I got the CDMA screen... there is a difference in the case that the screen is on.
Is there a way to remove the case and just use the screen?
The phone on the right is my GSM phone and the one on the left is the CDMA version.
The screen is EXACTLY the same I just need to change the back somehow and I cant find anywhere how to do it.
Please help!!!
I don't see why not, they are essentially the same phone. I would compare teardowms between the two phones before I would try though.
Sent from my Galaxy Nexus using XDA
I hope this works.
I bought a sprint galaxy nexus screen.
If anyone knows if this will work please let me know.
When I get the screen I will let you know what happens
Please help!!!
LOTS of heat from a heat gun to melt the insanely strong adhesive, lots of patience with a spudger to pry it away, and an act of god that you don't shatter the LCD while trying to pry it off. Then, hope that it actually IS the same LCD. There's a huge chance the connectors don't fit the same way.
Best of luck my friend.
Why would you get a CDMA screen to begin with? There's a reason it was labeled as such.
Sent from my Galaxy Nexus running AOKP+Franco from Tapatalk 2
It could potentially be the same thing, just with a different frame.
I'll see if I can ask a Sprint tech nicely to give me a defective one that I can try to throw on a GSM frame.
Yay, I love fun projects.
If you want to see if it will work, plug the LCD flex cable from the CDMA screen into the GSM board, then tape the battery to the contacts and try to power it on. If it starts to boot up and you can see the screen, it should be good with a different frame. If it doesn't feel like it's going to fit, don't force it though. You'll screw up your board, then you'll have bigger problems.
Good luck!
I know the screen fits the problem is the case connected to the back of the screen.
I got a really good deal on this screen and I thought it would be able to fit because the screens are exactly the same.
Is heat gun my only option? (Can i use a hairdryer as a heat gun?)
ricmann1 said:
I know the screen fits the problem is the case connected to the back of the screen.
I got a really good deal on this screen and I thought it would be able to fit because the screens are exactly the same.
Is heat gun my only option? (Can i use a hairdryer as a heat gun?)
Click to expand...
Click to collapse
You can use a hair dryer but it will take longer. It will eventually come up though. Be patient and don't force it. Heat it, then pry gently, heat some more, pry some more and so on until it comes off. Be very, very careful!
Sent from my Galaxy Nexus using xda premium
What side do I heat up the backside or the glass??
Bump
I would heat the frame - that's the part you're going to be pulling off.
But seriously, I know they look like they're the same thing, but try what I said before. The iPhone 3G and 3Gs screens look identical, but the flex cable fits differently onto the motherboard. Before you do all the work to remove the frame, just check it.
Okay, confirmed. They are the same screen. I just tested it.
Kudos to you for doing this, I love this kind of stuff.
Props!
Sent from my HTC One X using Tapatalk 2
So has anyone successfully separated the display form the frame??
Separating the display from the chassis is fairly simple. Separating the glass screen from the digitizer is nearly impossible.
Btw... separating the digitizer cable straight down the middle is also fairly simple, but it is not recommended.

Bezel Replacement

I am ordering a new genuine OEM T-989 enclosure. I have seen a lot of people replace the screen digitizer combination. I have not seen any body remove the digitizer and screen from the bezel and mid frame.
Has anybody done this?
Does anybody have any information on this?
Any help would be greatly appreciated.
Sent from my SGH-T989 using Tapatalk 2
shnn2011 said:
I am ordering a new genuine OEM T-989 enclosure. I have seen a lot of people replace the screen digitizer combination. I have not seen any body remove the digitizer and screen from the bezel and mid frame.
Has anybody done this?
Does anybody have any information on this?
Any help would be greatly appreciated.
Sent from my SGH-T989 using Tapatalk 2
Click to expand...
Click to collapse
I was going to do this till I see how difficult it is. It is almost impossible to separate the bezel from the digitizer with out breaking the screen. YouTube it.
Sent from my Galaxy SII T-mobile using xda premium
yeislak said:
I was going to do this till I see how difficult it is. It is almost impossible to separate the bezel from the digitizer with out breaking the screen. YouTube it.
Sent from my Galaxy SII T-mobile using xda premium
Click to expand...
Click to collapse
not true, all you need is a heat gun/blow dryer and a steady hand + a pry tool.
KillaHurtz said:
not true, all you need is a heat gun/blow dryer and a steady hand + a pry tool.
Click to expand...
Click to collapse
Any advice on temperature settings and adhesive replacement / pry tool?
Sent from my SGH-T989 using Tapatalk 2
I got sand paper and took all the chrome off the bezel. Come to find out the plastic is a matte black. Looks sick and my phone doesn't look like crap anymore. Looks brand new. Will post pics later if interested.
Sent from my AOKP-T989 using xda premium
yeislak said:
I got sand paper and took all the chrome off the bezel. Come to find out the plastic is a matte black. Looks sick and my phone doesn't look like crap anymore. Looks brand new. Will post pics later if interested.
Sent from my AOKP-T989 using xda premium
Click to expand...
Click to collapse
What grain sand paper did you use? And any special technique in the sanding process?
Ayodeji13 said:
What grain sand paper did you use? And any special technique in the sanding process?
Click to expand...
Click to collapse
P600 I believe. I know it was 600 tho. And no technique I didn't even take the phone apart. I took the battery door off and make sure you have a screen protector on so you don't f up your ****. Just rub he paper hard on the bezel don't be afraid. It will take about 30 to 45 min maybe an hour with breaks cus your fingers will start to burn. Use a gloves they'll help.
Sent from my AOKP-T989 using xda premium
I'm at the doctors when I get out I'll put up some pics so you can see what it looks like before you do it. Also be careful you don't get to much the dusted paint in any port.
Sent from my AOKP-T989 using xda premium
here you go
I have been thinking that if it is impossible, could you not just sand off the bezel, then Dremel out the inside screen mount of the new frame and finally epoxy the new bezel where the old bezel used to reside with plastic epoxy?
I asked some expert phone repair guys at the CPR Cell Phone Repair franchise; and they said that the screen will never ever ever ever come off unless you are either a machine or really good. They stated that they would not be able to guaranty the screens safety especially considering the heat involved.
If it is done by Samsung at all without replacing the entire digitizer and screen combo I would assume they use some kind of vacuum suction cup to pull off the screen after the proper amount of heat is applied.
Or, we could just paying Samsung the quoted 100 dollars to have it done.
This is non warranty work, so does anyone think they will mind if the phone is rooted?
Here is where you can order parts.
I don't know if they are genuine.
http://www.parts4repair.com/samsung-galaxy-s-ii-t989/
shnn2011 said:
I have been thinking that if it is impossible, could you not just sand off the bezel, then Dremel out the inside screen mount of the new frame and finally epoxy the new bezel where the old bezel used to reside with plastic epoxy?
I asked some expert phone repair guys at the CPR Cell Phone Repair franchise; and they said that the screen will never ever ever ever come off unless you are either a machine or really good. They stated that they would not be able to guaranty the screens safety especially considering the heat involved.
If it is done by Samsung at all without replacing the entire digitizer and screen combo I would assume they use some kind of vacuum suction cup to pull off the screen after the proper amount of heat is applied.
Or, we could just paying Samsung the quoted 100 dollars to have it done.
This is non warranty work, so does anyone think they will mind if the phone is rooted?
Click to expand...
Click to collapse
The pictures above you post is what I did to my phone. I sanded the bezel without even taking it apart.
Sent from my SGH-T989 using xda premium
The Bezel is part of the frame I believe. I would bet allot of money you can't get the screen of without cracking the digitizer. But, heat the top and bottom, that is where the greatest concentration of adhesive is. And watch the ribbon to the capacitive buttons because they will be stuck to the screen. You will have to disconnect them.
Sent from my SGH-T989D using xda premium
yeislak said:
here you go
Click to expand...
Click to collapse
That looks pretty cool dude. I have a question for you tho. How did you set the DPI so high? Your icons are small and thats how I want mine to be except whenever I use the DPI app from the market, it causes problems with parts of the ROM. For example the google search bar will only go halfway across the screen.
yeislak said:
here you go
Click to expand...
Click to collapse
That looks badass. Wanna do it to mine since you in Miami? jk lol
yeislak said:
here you go
Click to expand...
Click to collapse
Is that android bot doing the Hokey Pokey?
The Team Infamous project is up and running. http://www.infamousdevelopers.com
Sent from my SGH-T989 using Tapatalk 2
I just got my replacement about a week ago. I bought this phone used and without the battery door. Scuffs included. Luckily I kept the screen immaculate. None the less now that I have a mint handset and bought a battery door... the T989 sure is a smexy fellow. IMO the best looking Galaxy s2. Too bad we never got the Exynos and had to settle for the much slower s3 SoC. I:-/
Sent from my SAMSUNG-SGH-T989 using xda premium
RushAOZ said:
I just got my replacement about a week ago. I bought this phone used and without the battery door. Scuffs included. Luckily I kept the screen immaculate. None the less now that I have a mint handset and bought a battery door... the T989 sure is a smexy fellow. IMO the best looking Galaxy s2. Too bad we never got the Exynos and had to settle for the much slower s3 SoC. I:-/
Sent from my SAMSUNG-SGH-T989 using xda premium
Click to expand...
Click to collapse
Were running at 1.5 Ghz everyone else is at 1.2Ghz.
Sent from my SGH-T889 using Tapatalk 2
Site back up
The infamous website is back up.
http://www.infamousdevelopers.com

How to replace just the glass lens on the at&t galaxy s3

Pretty much all you need in the title. I wanted to know how to do this mainly because it's cheaper then buying a lCD digitizer combo and because I can't find a guide anywhere else. Any tips and tricks on how to do this should be well appreciated and any guides. Thanks in andVance for anyone's help.
Sent from my SAMSUNG-SGH-I747 using xda premium
Backslash10 said:
Pretty much all you need in the title. I wanted to know how to do this mainly because it's cheaper then buying a lCD digitizer combo and because I can't find a guide anywhere else. Any tips and tricks on how to do this should be well appreciated and any guides. Thanks in andVance for anyone's help.
Sent from my SAMSUNG-SGH-I747 using xda premium
Click to expand...
Click to collapse
I also have a cracked the screen, What my search result has come up with is the cost to replace the screen is ~$200CDN. Can you please keep me posted on what path you would be taking, might just follow
Replacing the glass from the actual screen is very hard and would require tons of technical know-how because the two are fused together.
Not recommended, even by experts.
Well I know it's extremely hard but I'm mainly looking for advise about it is all it decently help people out here.
Sent from my SAMSUNG-SGH-I747 using xda premium
Backslash10 said:
Well I know it's extremely hard but I'm mainly looking for advise about it is all it decently help people out here.
Sent from my SAMSUNG-SGH-I747 using xda premium
Click to expand...
Click to collapse
it's not possible to do. period.
Really I thought I could be done but took a lot of waiting and just the right heat and pressure.
Sent from my SAMSUNG-SGH-I747 using xda premium
dLo GSR said:
it's not possible to do. period.
Click to expand...
Click to collapse
Nice
Op
http://forum.xda-developers.com/showthread.php?t=1904554
it is very possible I have done 4 of them already...
http://forum.xda-developers.com/showthread.php?t=1890708
dLo GSR said:
it's not possible to do. period.
Click to expand...
Click to collapse
hahahah.....owned, should really atleast attempt to find out if what you are saying has any evidence to support it, or rebut it
dLo GSR said:
it's not possible to do. period.
Click to expand...
Click to collapse
I've heard its possible, just EXTREMELY difficult to manage.. I wouldn't.
Its entirely possible, as the multiple video's have shown. Although i haven't done it to the SGS3 yet, i will be soon. Cracked my lens the other day, replacement in the mail. I have also changed the screen's on several iphones (at my job) which us a similar method of gluing. It is made to be difficult by design...to keep people from attempting it and opting to send it in for repair. Of course when you do this, through samsung anyways, you are being charged for the entire led assembly and not just the lens.
dntesinfrno said:
Its entirely possible, as the multiple video's have shown. Although i haven't done it to the SGS3 yet, i will be soon. Cracked my lens the other day, replacement in the mail. I have also changed the screen's on several iphones (at my job) which us a similar method of gluing. It is made to be difficult by design...to keep people from attempting it and opting to send it in for repair. Of course when you do this, through samsung anyways, you are being charged for the entire led assembly and not just the lens.
Click to expand...
Click to collapse
Good to hear you did it at your job with iphones. Any idea what glue they use to bond the glass to the digitizer? I have searched and searched and cannot find anything. I have done several S3 so far and this is the one ingredient lacking for a complete repair. In terms of what it feels like while removing the old glue; it seems to be silicone based the way it comes up, you can roll it into little balls, it's is tacky and has that rubbery consistency.
Unfortunately, no idea what adhesive they use. Personally i would attempt what YellowGTO did first and simply heat the existing glue and see how it holds. Normally this should be enough to do the job, as you can imagine the stuff if pretty tacky. Especially if the lens fits as tightly as his in the video, its doubtful it will fall out even with the slightest remaining glue. If for whatever reason there isn't enough to firmly hold the screen in place i've used small dabs of liquid tape where necessary, or the thin 3M double sided tape would work also i suppose. In this case i usually wrap the device in a towel or shirt or whatever you have laying around and set something with some decent weight on top of it, screen side down on a flat surface, overnight to give the adhesive time to setup properly.
dntesinfrno said:
Unfortunately, no idea what adhesive they use. Personally i would attempt what YellowGTO did first and simply heat the existing glue and see how it holds. Normally this should be enough to do the job, as you can imagine the stuff if pretty tacky. Especially if the lens fits as tightly as his in the video, its doubtful it will fall out even with the slightest remaining glue. If for whatever reason there isn't enough to firmly hold the screen in place i've used small dabs of liquid tape where necessary, or the thin 3M double sided tape would work also i suppose. In this case i usually wrap the device in a towel or shirt or whatever you have laying around and set something with some decent weight on top of it, screen side down on a flat surface, overnight to give the adhesive time to setup properly.
Click to expand...
Click to collapse
Sure the outer frame is enough in most cases to hold it on, thats fine. But there is a side effect once all the glue is removed off the digitizer. There will a micro gap between the 2 when the original glue is removed. If you press the new glass hard enough, ( for example cleaning fingerprints like I often do against my shirt ) and it touches the digitizer, the phone freezes. You must then power off the screen, sleep button and then press power again to bring it up and then it will work again. Seems to be a recalibration process going on.
Maybe these 2 posts should be merged and I would certainly read the post below. Much more good info here on the subject...
http://forum.xda-developers.com/showthread.php?p=33056057#post33056057
Yea, i've been following several threads about lens replacement, even before i busted mine (jinxed myself?). I'd much rather have to deal with a 15 second reboot over possibly damaging the LED or worse using an adhesive that may not be transparent. I can live with the air gap, or even the 'invisible' smudges on my personal device...although if i were going to do this for profit obviously that would be unacceptable. 20 dollars and an hour of my time vs 200+ for the whole assembly or 125 for an insurance deductable..i can overlook imprefections . It would be interesting to find out exactly what substance they are using though.
EDIT - Just for SnG's i googled 'mobile screen glue' and this was the first result. http://www.alibaba.com/product-gs/523467689/Optical_Clear_Adhesive_for_touch_screen.html?s=p
While i'm sure its not the only product out there for this purpose, if this is any indication it won't come cheap..
dntesinfrno said:
Yea, i've been following several threads about lens replacement, even before i busted mine (jinxed myself?). I'd much rather have to deal with a 15 second reboot over possibly damaging the LED or worse using an adhesive that may not be transparent. I can live with the air gap, or even the 'invisible' smudges on my personal device...although if i were going to do this for profit obviously that would be unacceptable. 20 dollars and an hour of my time vs 200+ for the whole assembly or 125 for an insurance deductable..i can overlook imprefections . It would be interesting to find out exactly what substance they are using though.
Click to expand...
Click to collapse
Agreed it would be nice to find out what type of glue.
The phone breaks so easy i am surprised I have not heard of a Class Action Lawsuit... :silly:
here are instructions on replacing just the glass/screen
[HOW TO] [TUTORIAL] S3 Replace Cracked Glass Screen w/ YouTube Video
i replaced my screen took me about 50 mins with 2 people
XeoNoX said:
here are instructions on replacing just the glass/screen
[HOW TO] [TUTORIAL] S3 Replace Cracked Glass Screen w/ YouTube Video
i replaced my screen took me about 50 mins with 2 people
Click to expand...
Click to collapse
Very very nice!! :thumbup::thumbup:
Sent from my SCH-I535 using xda app-developers app
marcustaz said:
Very very nice!! :thumbup::thumbup:
Sent from my SCH-I535 using xda app-developers app
Click to expand...
Click to collapse
JUst did an even EASIER replacement for a cracked camera lens. I purchased this part from ebay :
http://www.ebay.com/itm/Blue-Housin.../271099346918?ssPageName=ADME:L:eek:C:US:3160
1) Turn phone off
2) Take off battery cover
3) Remove battery, SIM card, and SD Card
4) remove about 8 screws to remove the middle back place.
5) Remove middle back place carefully (There are still tabs holding it secure)
6) Place new middle back in place
7) Screw down
8) Replace battery, SIM card, and SD card
9) Replace battery cover
10) Power up phone!!
Took all of 10 minutes total. Flawless fix on my AT&T Samsung Galaxy S 3
Gentlemen and OP please update your original post to include this video. This is NOT to promote myself but from all the comments and feedback everyone has stated it is the most detailed and informative on You Tube on the glass replacement procedure. I also have separate videos on shattered glass replacement. Thanks and good luck.

Replacing Broken Glass

Hi all
I have a cracked screen on my Galaxy Nexus and want to replace it.
I know the digitizer is stuck to the glass but I've watched a video on YouTube and with a bit of time and patience it should come apart.
Has anyone successfully replace the glass and only the glass on the Galaxy Nexus?
I've seen some replacement glass on eBay for around $20 which doesn't seem too bad. But I want to know when you remove the old glass which would remove the glue holding the old glass on, do I need any glue to stick the new glass on and where would I find this so called glue?
I bought a used broken galaxy nexus off ebay that also has this issue and I am probably gonna try and fix it eventually. I ordered replacement glass off ebay for 15 dollars and its coming with little tools for the job aswell.
Did it come with stuff to stick the glass back on :s
I will probably pick it up on Monday so I can check then.
Sent from my Galaxy Nexus using xda app-developers app
I did the same thing. Found a nexus on ebay for 40 bucks with a cracked screen. Phone works perfect, I ordered replacement glass only and and I'm just way nervous to do it.
Sent from my Galaxy Nexus using xda premium
Any luck with this repair? It seems like there are people who say it can't be done and some who say it can. I've watched some videos on this topic as well but they never really show how to put the glass back on without getting air and dust trapped in between the digitizer and the glass.
chipzdelux said:
Any luck with this repair? It seems like there are people who say it can't be done and some who say it can. I've watched some videos on this topic as well but they never really show how to put the glass back on without getting air and dust trapped in between the digitizer and the glass.
Click to expand...
Click to collapse
I had the same issue with my Gnex, but after talking to private service guy,I replaced complete digitiser together with glass. The reason was simple.
As I get info from that guy, you will never be able to protect any dust to stay at digitiser area, so after some time phone will not recognise some touches,because of glue has to be used and it is not easy to cover complete area,that is why probably dust will come inside.
Anyway,those are informations I get from guy who is servicing/repairing all kinds of mobile phones, so this was his opinion and maybe there is better way,how to solve it.
I wish you good luck
It didn't come with glue .
I found this http://www.amazon.com/gp/product/B004WIQW3U/ref=oh_details_o00_s00_i00 which seems like the right thing to me.
Sent from my Galaxy Nexus using xda app-developers app
so did anyone successfully replaced the glass?
I found good deal in Amazon and not sure if this is going to work!
I have a broken GNex which I am willing to sell for parts... Anyone interested Pm me
sdhanush1 said:
I have a broken GNex which I am willing to sell for parts... Anyone interested Pm me
Click to expand...
Click to collapse
do you have an intact glass?
the.lirius said:
do you have an intact glass?
Click to expand...
Click to collapse
I had... Sold it already... I remember seeing one in eBay UK website you may want to try there.
Sent from my awesome Xperia Z
sdhanush1 said:
I had... Sold it already... I remember seeing one in eBay UK website you may want to try there.
Sent from my awesome Xperia Z
Click to expand...
Click to collapse
ty mate.. i will seriously think about it :good:
Any word on replacing the glass? I've been watching some videos about the process that includes everything except the regluing.
I found one video on the regluing process, but it shows the replacement in an industrial factory setting with an industrial autoclave vacuum to remove any air bubbles present.
I have also seen people on the YouTubes use 3mm wide double sided tape around the entire perimeter of the phone to reduce dust, but I can see potential issues with this method, as the factory method seems to apply a solid layer of adhesive material.
I would like to hear success stories, but I'm inclined to pop this thing open and give out a shot.
Sent from my Galaxy Nexus using Tapatalk 2
advise
sdhanush1 said:
I have a broken GNex which I am willing to sell for parts... Anyone interested Pm me
Click to expand...
Click to collapse
I thought the glue is not a must have parts,but samsung wont put the glue on without any reason. what i know about the glue is it will make ur glass much harder...

Categories

Resources