I partitioned my SD card using ROM Manager a while ago, into 500 MB ext2 and the rest as fat32 (~6.5 GB).
Now, I want to repartition to increase the 500MB one to 1 GB and make it ext4. However, when I connect my phone and use Gparted, it only sees the 6.5 GB partition, not the 500 MB one (a2sd I guess).
b0ng0 said:
I partitioned my SD card using ROM Manager a while ago, into 500 MB ext2 and the rest as fat32 (~6.5 GB).
Now, I want to repartition to increase the 500MB one to 1 GB and make it ext4. However, when I connect my phone and use Gparted, it only sees the 6.5 GB partition, not the 500 MB one (a2sd I guess).
Click to expand...
Click to collapse
what?
Try do a full format under windows (untick "quick format")
@bortak:
As far as I understand him, he wants to repartition his SD card because he wants to increase the size of his EXT-partition. This partition should also be upgraded to EXT4.
@b0ng0:
1.) Backup all apps and system data with Titanium Backup.
2.) Boot into recovery and make a complete nandroid backup
3.) Connect phone to computer, enable USB Mass Storage (USB-MS in recovery), backup the whole data of the SD card (FAT32 partition is enough cause of your backups), disable USB-MS and disconnect phone from computer
4.) Partition your SD card either with recovery are GParted according to your needs
5.) Copy all data back on SD card (FAT32 partition)
6.) Flash rom and restore all apps (systemdata only if you did not change rom, WiFi Access Points can always be restored)
look at this video: http://www.youtube.com/watch?v=sVK-tJe8pXE
it helps you a lot
Sorry, I should have stated the issue more clearly:
I have two partitions - 500 MB ext2 and 6.5 GB FAT32.
I want to increase my 500 MB ext2 to 1 GB ext4.
However, when I open Gparted it only sees the 6.5 GB FAT32 partition. I'm thinking this is because the 500 MB is in use by the phone (i.e. used for a2sd, although I may be wrong).
Do I need to connect my phone in any specific way?
EDIT: I used Windows Disk Manager and it saw both partitions, thanks for the help guys.
Download Gparted live, it's more easy formatting your SD. And DO A BACKUP of your sd before.
Related
I hope I am now putting this in the right place but I am getting very frustrated. Decided to bite the bullet and rooted my Desire at the weekend. As I have W7 64bit, I decided to use the Tiny Core Linux method mentioned by benko286.
I installed a Modaco ROM with A2SD+ and so far so good.
Rom Manager allowed me to install the Rom from the SD card. I then used Rom Manager to partition the SD card with a 512mb Ext3 partition and a 32mb swap partition so that I could take advantage of A2SD+.
However, when I install new programs they seem to be going to the phone memory as the space on the phone memory is going down.
I copied the Rom zip file back to the Fat32 partition on the SD card and tried to install the Rom again from scratch using Rom Manager. All I get now is a big red ? and after a few seconds the phone reboots again.
What have I done wrong?
Also, if I use Acronis Disk Director to partition the card, there is an option for the Ext3 partition to be primary or logical - should this be primary and should the Linux swap partition be before of after the Ext3 partition?
All help gratefully received!
TIA
norm
I can only assume this has been asked and answered, but I have searched and not been able to fine a suitable post yet...
I want to find a guide to format and partition my (16GB in my case) SD card in the best way for the current/future Desire ROMs
eesmm said:
I can only assume this has been asked and answered, but I have searched and not been able to fine a suitable post yet...
I want to find a guide to format and partition my (16GB in my case) SD card in the best way for the current/future Desire ROMs
Click to expand...
Click to collapse
You can use Windows to format the sd card to Fat32, after which you can then use Rom Manager (download from market) to create a ext partition (it will shrink the Fat32 partition to make room for the ext partition)
Alternatively, you can do it all in linux and it's pretty straight forward.
For example, Ubuntu (you can download a live version of ubuntu which you can burn to cd or copy to a bootable usb stick) can read the sd card (I just connect the phone whilst in clockworkmod recovery, select mount usb, and voila) and then you can use 'Disk Utility' located in the administrative tools area of Ubuntu to delete the stock partition that comes with most pre-formatted memory cards, create a Fat32 partition (Eg: 15GB) and then create an ext4 partition with the remaining space.
Using Linux is handy for backing up the contents of your ext partition - particularly useful when upgrading from a smaller sd card to a larger one but wanting to keep all your data.
I'm not the greatest at writing instructions and I have no idea if any of the above helps you in any way, but I hope it does!
I would use ROM Manager, but the Max partition size seems to be 512 and i want to make a 2GB partition. I am also unsure of whether the EXT partition (is EXT 3 or EXT4 best) should be primary or secondary, and will the Desire automatically start putting APPs there?
...and and what point do I turn the card back into a Goldcard, if at all necessary?
eesmm said:
I would use ROM Manager, but the Max partition size seems to be 512 and i want to make a 2GB partition. I am also unsure of whether the EXT partition (is EXT 3 or EXT4 best) should be primary or secondary, and will the Desire automatically start putting APPs there?
...and and what point do I turn the card back into a Goldcard, if at all necessary?
Click to expand...
Click to collapse
1) Gparted is the best partition tool ;-) It can be used as a live CD - which can be booted in virtual box.
2) You'll never need a goldcard, unless you want to go back to stock RUU (ie to send your phone back to get fixed).
3) EXT4 Primary partition
4) The desire will put apps there if the rom has Apps2sd enabled. Most roms these days do, but some require you to install the script yourself. 2gb seems a lot for just apps though.
Simple is better.
I myself have an 8gb sd card and used rom manager to partition it. I did not format my sd card beforehand, just took out the card from the package and put it into my phone.
Checking my appbrain list, i currently have 132 apps with a total size of 344MB.
Using the app Quick System Info:
A2SD storage-- Total: 458MB, Free: 110 MB
Internal storage-- Total: 148MB, Free:63.34 MB
I personally think 512 MB partition is more than enough.
friedkimchi said:
I personally think 512 MB partition is more than enough.
Click to expand...
Click to collapse
Yeah, I'd agree with this. I had a 512MB partition - extended it using gparted to 1GB but it really was a pointless activity as I was nowhere near using the 512MB in the first place
Oh well - future proof I guess!
@ OP... What would you need 2GB for? Seems, well, excessive...
BTW, the latest clockworkmod supports partitioning directly in the recovery menu and I believe it will give you the size you want.
I have 8GB MicroSD card, when I try to partition it using GParted, and I partition it with:
FAT32: 6.5GB
EXT4: 1.00GB
It shows an error next to the EXT partition, and it happens with all EXT (ext2,3 and 4).
I read somewhere to partition the EXT first and it worked, my questions are:
1. How to move my data back to the FAT partition if I use windows? (as windows recognize the first partition only, and since it is ext, it won't recognize anything)
2. If question 1 was solved, will it work to use the partitioning that way? As I read that FAT should be first.
Thank you.
What you could do is boot into recovery and use the SD partitioning in there. That's ifyou have CWM version 3. Rom Manager will also do it. You could use that as a starting point and then just upgrade it to ext4.
Just use Rom Manager to format. Easiest way imho
Hi everyone. I'm a new android user (recently got an HTC Desire) and i have an issue with the partitioning of the sd card.
First of all i apologize if i posted in the wrong section, or if this problem has been already disscused (i didnt really find anything). I am new at this so sorry for the noob question!
I have rooted the device (all the steps from a great guide here at xda) and installed the leedroid rom with app2sd. I tried using the gparted method but i think i missed a step or something cause it didnt work.
So, i tried partitioning with the ROM Manager, choosing 512mb ext partition and 32 mb of swap. After rebooting, in the storage menu it shows only 134MB of available space (63 mb available before using the rom manager).
Why is it only showing 134 mb and not 512 or more ? Did i did something wrong or should i try gparted again ?
You have to partition your sd-card again.
Download GParted here: http://gparted.sourceforge.net/
Start your Computer with it.
Put your sd-card in a card-reader, connect it to your computer and partition your sd-card so:
0 MB for SWAP!!
512 MB - 1.5 GB for ext3
Rest: FAT32
Source: http://leedroid.com/bravo-wiki/partitioning-your-sd-card-ready-for-a2sd
Sorry for the late reply and thanks for helping me. I tried again with GParted creating a 512 mb ext3 and the rest FAT32. I didnt create a swap. When i turned on the phone it said it cannot mount the SD card. I tried wiping the phone and put the ROM on the SD again. In the recovery menu when i choose install zip from SD it says something about the SD not being mounter (dont remember exactly). So i had to reformat the SD again and made the whole card FAT 32, thats the only way it let me install the ROM and mount it.
Any ideas ?
carabus1206 said:
Sorry for the late reply and thanks for helping me. I tried again with GParted creating a 512 mb ext3 and the rest FAT32. I didnt create a swap. When i turned on the phone it said it cannot mount the SD card. I tried wiping the phone and put the ROM on the SD again. In the recovery menu when i choose install zip from SD it says something about the SD not being mounter (dont remember exactly). So i had to reformat the SD again and made the whole card FAT 32, thats the only way it let me install the ROM and mount it.
Any ideas ?
Click to expand...
Click to collapse
You need to erase partitions and make FAT partition first. Make sure they're both primary, not logical partitions. You can lose the swap partition.
I have a 32GB card. Was using CM7 with scripts mounted for 280 MB internal memory. Wanted to change ROM so.
1. Reflashed CWM (didn't flash the boot.zip before reflashing CWM)
2. Wiped everything
3. Installed another ROM (3 ROM's actually )
Now I just can't locate the ext3 and swap partition on any software including Paragon or Gparted. It's like the partition just got lost. Any help will be appreciated.
Have you partitions with unallocated space or is the sd card so big like it be? For example, that the SD-Card has 32 GB in gparted or paragorn?