Develop Bugs

[Q] CM 6.1 + Snap 7.6 + SnapTurbo

I apologize if this has been answered before. And yes, I can assure you I've read the instructions on how to go about installing SnapTurbo and I know all the warnings. Nothing is wrong with my Evo, however I'm curious as to whether or not Turbo is actually running.
What happened was I first installed CM 6.1, played around, wiped both caches, then installed Snap 7.6 (CFS). Then I activated SnapTurbo. On reboot, the phone wouldn't load past the white Evo 4G screen. So I just reflashed the Snap 7.6 kernel. Everything works fine now and the SnapTurbo app says it is activated. However, I'm not sure whether or not I can trust it since I'm not sure how Turbo works its magic. I ran a Quadrant benchmark and around 2040, so I'm guessing it is. Just wanted to make sure.

Bump. Anyone?

2040 doesn't sound like Turbo's been activated.
Do a full wipe of you data+cache, flash a sense ROM, then flash CM6.1-RC1, followed by snap, then do the failsafe Turbo method.
Also, give it plenty of time on the whitescreen, and if you're worried, plugin and look at adb logcat. If you see the same messages repeating or logcat sits there saying "waiting for device" for ten minutes, then yeah, it's looping.
Finally, keep in mind that in 6.1, all of the current versions of Snap are going to have issues due to the differences in kernel versions. For example, Snap 7.6 will not have working bluetooth.

I had the same problem I just pulled the battery and put it back in and it loaded just fine, every time I tried booting from recovery it would get stuck, this probably isn't an exact science but I hope it works
Sent from my PC36100 using XDA App

Thanks guys. Ill give it a try when I get home. Late for my sociology class! I dont wanna use up then battery wiping and flashing right now.
Sent from my PC36100 using XDA App

Alright so instead of going back to my Stock rooted backup, I cleared all caches and restored my original CM 6.1 backup (without Snap kernel). Then I reflashed Snap kernel and activated SnapTurbo and I THINK it's working now. The scores in Quadrant vary; the highest I got now was 2227, but it's gone as low as 1985. I think it's because SetCPU is set to Interactive (998 max, 245 min):
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Put SetCPU on Performance and overclock as high as you can, then run Quadrant three times. You should see 2300+, sometimes all the way up to 2800+.

When I do that, Quadrant first force closes on startup, then it freezes my phone when it gets to the first 3D benchmark (the one with the staircase) and my phone reboots. I'm pretty sure that I did an uninstall and reinstall of it already but I'll do it again.
EDIT: Alright so I ran it with the 3rd-to-highest overclock 3 times. First I had 2187, then 2383, and now 2476. I think it's running. Thanks guys!
PS: What governor would you recommend as the best combination of speed and low power consumption without any noticeable lag? I know this kernel has HAVs, so I don't have profiles enabled. But should I stick with Interactive or go with Conservative? I don't game on this thing, plus I'm using LauncherPro so I don't notice much lag already.

SetCpu issue

I'm not sure if this is normal behavior or not but ill have my max and min values set and when I leave the app and come back to, the value sliders will still be set but it will display the min as 384.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I don't recall it doing this before, unless I just never noticed. But I did a restore and also reflashed the kernal and it has not solved it!
I also tried Cpu Tuner and it did the same thing! What would be causing this?
"Edit - I forgot to add I'm on juggernaut 4.1 with bullet kernel"
Tap-A-Talkin it ... Galaxy S ii

Try un-installing set cpu. Boot into recovery and wiping data cache and dalvik. Then fix permissions. Reboot and re-install set cpu.

Thanks for the reply!
I just tried the method stated above and it Is still doing the same thing! I'm stumped! I really hope its not a hardware failure!
When adjusting clock speed with setcpu does this change the frequency for both processors? I'm wondering if the second processor is causing this issue.
While looking at the info tab in setcpu it lists processor 0, and processor 1 every once in awhile processor 1 dissappears from the screen. I'm assuming that's normal behavior though since both cpus aren't being used at all times and I guess its going into standby.

Try faux clock instead of setcpu.

Alright I wiped cache and dalvik once again fixed permissions amd than installed faux clock and still the same thing.
I'm really starting to think my SGS2 has a bad cpu.
I set the values to this, exited the app, reloaded the app and minimum was back down to 384
Sent from my SGH-T989 using Tapatalk

I remember I had an issue something like this. I had to do a wipe data/factory reset in recovery to fix it. You could back up your apps and try that. I know its a pain tho.

I still have not figured out what's going on, I have tried everything I can think of. I've even odin back to stock, updated latest firmware from kies, reflashed juggs... nothing has changed this behavior.
Even using fauxclock, if I set both min and max frequencies to the same setting when I exit the app and re open the app, the max frequency is where I set it to. but the min frequency goes back to 384. Anyone elses do this?
This is my first time owning a dual core phone and I'm beginning to think its normal! Might be panicked for no reason!
Tap-a-Talkin it.... Galaxy S !!

Is there a reason you want your minimum frequency so high? 384 is normal.
Sent from my SGH-T989 using xda premium

No reason, I just found it strange and was thinking there was a problem with the hardware, but I actually did a few test on it tonight and it's working, So I can rest easy!
Tap-a-Talkin it.... Galaxy S !!

Battery saving tips ICS, cm9, maybe AOKP...

Just wanted to share for the people that arnt aware.
Hit menu, developer settings.
1. Force GPU rendering.
2. Limit background processes to 3 or 4 (this will need to be set on every reboot).
3. Turn both animations off.
I say may work on aokp, because I havnt used it yet.
This may turn into a full blown "battery saving tips" thread, but atm its for ICS.
Sent from a phone with kNOw CiQ k0nane...

I'm sure most people know, but for the slow ones like me, would you mind a little how-to for your tips? I can do the limit background processes, but don't know how to do the others...
Thanks!

http://db.tt/3NdktNqx
The tips 1-3 are all in the same menu, developer settings. Sorry I couldnt post the image, using xda app, not allowing me to, but theres the direct link.
Sent from a phone with kNOw CiQ k0nane...

TeamERA said:
http://db.tt/3NdktNqx
The tips 1-3 are all in the same menu, developer settings. Sorry I couldnt post the image, using xda app, not allowing me to, but theres the direct link.
Sent from a phone with kNOw CiQ k0nane...
Click to expand...
Click to collapse
Here you go which ever team member of mine has 1x
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

LOL , thanks Adrian, and yeah Im about tired of the new advanced 3g in Atl. Better speeds outside maybe, less signal penetration, definitely.
Sent from a phone with kNOw CiQ k0nane...

Sadly that's where the advantages of GSM shine
I just went through the animations, it doesn't make sense why people would want to be turning at x10 its redunk lol

anyone know if in ICS theres an option like in GB to turn 'background data' off?

ejbmvp said:
anyone know if in ICS theres an option like in GB to turn 'background data' off?
Click to expand...
Click to collapse
Yep. You can either shut the 3G off from: Settings > Wireless and Network > More > Mobile Networks > 3G data [checkbox].
OR you can just turn the background data off like you said: Settings > Accounts and Sync > ON/OFF switch in the upper bar.
Hope this helps. You can also use Juice defender or something like it to stop the background data automatically and let it connect once every 15, 30, 60 minutes or so...

Tegrak OC updated! Now works on E4GT ICS 4.0.4!

Thats right, ever since AOKP and CM9 have updated to 4.0.4 i lost the ability to overclock, well Tegrak OC is now fully functional (at least on AOKP b37)

Any brave souls willing to test on cm9a5?.. if it doesnt work it wont brick the phone will it? Lol
Sent from my SPH-D710 using XDA

It works fine. I've used tegrak for ever. As soon as it updated and started working I tried it on my ROM, CM9, and AOKP. Shouldn't have many issues. Just don't under volt too far

Anyone post the apk? Keep getting a error when download
edit:got it to download and works great!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my awesomely EPIC Phone

what settings you all usin?

Ya works for those who have tested this? Need a good starting point
Sent from my SPH-D710 using XDA

dpaschall said:
Ya works for those who have tested this? Need a good starting point
Sent from my SPH-D710 using XDA
Click to expand...
Click to collapse
Generally people undervolt -50 or -75 mV from the stock values. Some go -100 mV but that could get you bootlooped. Make sure that your phone is stable after undervolting before setting it on startup. As for OC, I'd say max should be like 1500 Mhz
Sent from my SPH-4710 using XDA

Tegrak has a great feature. No matter what your settings are when you reboot you have to apply the settings after the phone boots. So if you make a change that locks up the phone you can reboot and undo it by hitting cancel at the tegrak screen. When I undervolt I normally go -50mv on each step including GPU. This seems to work the best for me on ICS ROMs. On GB I could go to -75mv and even -100mv on some steps. But -50mv seems to give you a little more battery life and still good performance. Just my input.

[Q] how to fix this problem !?

the ICS v20f is a good rom for gaming and for daily use but this rom turn off my wifi when the screen was locked, and i dont like this because ever need turn 3G/4G activated.. awesome here have an solution for fix this problem? (i know that is a original config of v20f, but i want disable)

its kernel related.
im using cm10.1.3,right now,but it might be in advanced setting in wifi and change keep wi-fi on during sleep to always.
But u might be using wind kernel,try to use stock kernel

pmaioli said:
the ICS v20f is a good rom for gaming and for daily use but this rom turn off my wifi when the screen was locked, and i dont like this because ever need turn 3G/4G activated.. awesome here have an solution for fix this problem? (i know that is a original config of v20f, but i want disable)
Click to expand...
Click to collapse
It should be an easy fix. Has something to do with WiFiScanSupplicant line in the build.prop file. Download an editor from the play store https://play.google.com/store/apps/details?id=com.jrummy.apps.build.prop.editor and change the following:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my LG-P930 using xda app-developers app

Mr.201 said:
its kernel related.
im using cm10.1.3,right now,but it might be in advanced setting in wifi and change keep wi-fi on during sleep to always.
But u might be using wind kernel,try to use stock kernel
Click to expand...
Click to collapse
in the stock kernel have the same prpblem, but the Swetnes was helped me. Thanks for your answer

Swetnes said:
It should be an easy fix. Has something to do with WiFiScanSupplicant line in the build.prop file. Download an editor from the play store https://play.google.com/store/apps/details?id=com.jrummy.apps.build.prop.editor and change the following:
View attachment 2612717
Sent from my LG-P930 using xda app-developers app
Click to expand...
Click to collapse
i have changed this numbers, for higher and lower and doesn't have effect, ever than i lock screen a little time ago, my wifi turn off, only when i unlock the screen come back in the status bar.

pmaioli said:
i have changed this numbers, for higher and lower and doesn't have effect, ever than i lock screen a little time ago, my wifi turn off, only when i unlock the screen come back in the status bar.
Click to expand...
Click to collapse
Should be lower....20 is the factory setting so start there. Are you rebooting the phone afterward? For me I find 80 is the best value for me, but it can be as high as 180.
... also are you using an app like Juice Defender to manage power? If you are that will also have that effect.
Sent from my LG-P930 using xda app-developers app

Swetnes said:
Should be lower....20 is the factory setting so start there. Are you rebooting the phone afterward? For me I find 80 is the best value for me, but it can be as high as 180.
... also are you using an app like Juice Defender to manage power? If you are that will also have that effect.
Sent from my LG-P930 using xda app-developers app
Click to expand...
Click to collapse
yes, i've rebooted the phone after the alteration ..
no, i dont use juice defender.
thanks for your attention