[Q] Signal strength on Tmobile USA - Samsung Galaxy Nexus

I have the Galaxy nexus unlocked and am using it on T-mobile USA, it seems like i am getting 4G (HSPA) coverage less than when I was using my G2X. I was wondering if anyone else was feeling this way? I was also wondering if anyone has gone into the hidden menu (*#*#4636#*#*) under Phone info and experimented with changing the Preferred network type at all? I am currently set to GSM/CDMA auto (PRL) i tried changing it to WCDMA prefered, but it wont stick. I know we have done that in the past for other T-mobile 4G phones to tell the phone to always connect to 4G unless no 4G signal is present.

i too feel like its bad signal on the nexus, i changed to wcdma only though

Did yours stick? I tried to change mine, but if I go back into the hidden menu after I change it, its back to GSM/CDMA auto. My changes dont save......

i'm not noticing any difference from my nexus one really. also not noticing much better download speeds either.

mine sticks for sure

Did you do anything special? I go into the drop down menu select WCDMA preffered, then hit the back button to exit the hidden menu right? There is no save option or anything that Im missing right?

Just tried it again. I can pick WCDMA only and it will stick, but WCDMA prefered wont stick. Interesting....

are you guys getting better signal with WCDMA only or about the same?
i get really crappy 3G reception and sometimes it's so bad that i have to force my phone to stay on edge just so i can make phonecalls.

My phone constantly displays the H, but my speeds are down right despicable. Its near dial up status
Sent from my Galaxy Nexus using xda premium

I've had no problems with the GN on T-Mobile's network without changing any of the internal settings. In both New York and Arizona I've been getting 3 - 5 Mbps consistently, with peaks of up to 7 Mbps.
One thing I've noticed is that the radio switches to 3G when I'm not using data, but when I load a webpage or ask for data it switches to HSPA+. This is probably to save the battery life, so I'm not complaining.

This seems a relevant place. I just bought my GSM Nexus yesterday on Amazon and got it today. T-Mobile SIM card plugged in, I get terrible reception. I have no signal at all where I'm sitting, whereas my Vibrant and my G2 both had at worst 3G connection.
I'm not a clever man, but I know something is up. I haven't rooted or done anything to my phone. Is there something that I must do to get the phone to work properly?
To reiterate: I have done absolutely nothing but put in the SIM card.

Try a different baseband (search the GN forums for details)…

With the latest baseband (XXLA2) I seem to have better signal than I did on my nexus-s, and the nexus-s did pretty good.

netarchy said:
With the latest baseband (XXLA2) I seem to have better signal than I did on my nexus-s, and the nexus-s did pretty good.
Click to expand...
Click to collapse
Is there any update to which is the best modem to use for t mobile? Seems like one of my friends is having trouble getting signals in home but he is getting signals outside.
☞ sent from GS3 or Nexus

Related

[Q] How's your signal strength? [LTE]

Hey all,
I'm curious to how your reception is on the VZ GNex. I still have my Rezound here and it seems like I'm getting about -20db worse on the GNex compared to the Rezound. I'm curious - has anyone else experienced this?
Thanks,
Super
yeah, and it is killing me. In the same spot in my room I had my rezound, I had MUCH MUCH better signal strengh. I could keep 4G all day, which is why I switched from sprint to verizon. Thunderbolt, Droid Bionic, Rezound, all worked fine. The GN looses 4G consistantly. This might be a deal breaker for me. I am going to try a custom rom in a min when it finishes downloading, but I doubt that will help. Also am on 4.0.2.
on the thunderbolt there was a setting that allowed us to change when it "lost" 4G signal. I.E. it would allow the phone to pick up a weak signal. Does anyone know if there is a setting like this? I know the signal isn't weak in my house from the previous phones, so it is either a setting like this, or the GN has a really crappy radio...
The 3g and 4g on my Nexus is very bad and not even usable. It is either dropped or barely working. Without wi-fi my phone would have been useless today.
If this isn't correct quickly I will have no choice but to go back to my Thunderbolt which was great!
Service at my apartment just sucks but it's getting the same reception as my OG Droid
I had a rezound and was certainly getting a better signal, 2 things I noticed on the rezound was the battery door actually had antenna relays in it, and also there was 3 settings on the rezound for network performance (performance, normal, and battery saver)
I get horrible signal strength in spots, like on my way home from work there are several short distances where it just drops the signal all together.
At home, my phone seems to just drop connection completely and it's having a hard time picking it up again. Noticed this morning it had been without network access all night. Rebooted it and everything was OK (strong signal) in the exact same physical location.
does any body know how to update roaming with this phone I tried *228 but that didn't work
I am having similar issues in regards to network dropping out. I can understand why 4g would -being limited coverage and all- but 3g should seamlessly pick up where it drops off, plus my voice signal is much lower -100dBmw vs -85/-90dBm which I got with my OG Droid.
jnyce87 said:
does any body know how to update roaming with this phone I tried *228 but that didn't work
Click to expand...
Click to collapse
You can't update roaming on LTE devices, as the sim card automatically does it. What you can do is a "sim reset" type thing.
Power off, and leave your sim card out for like 5 minutes. Put it back in and turn on the phone. According to multiple sources, this will cause the sim to have to re-register on the network, thus refreshing/updating your privs.
Rezound is way better reception wise. Matter of fact, the Rezound is better at a lot of key things! Ima give this a chance but I gotta say I miss my Rezzy!!
Sent from my Galaxy Nexus using Tapatalk
WOW.... my Nexus data was very bad and almost unusable, but now it is fixed!
I didn't want to, but I did a factory data reset and it resolved the data issues. Everything is solid connections now and holding steady. Before the signal was bouncing all over the place.
Give the factory data reset a try if you are having issues. Yes you have to start over but it's better than having a phone that doesn't work.
Phew... now I am happy again! I really thought I was going to have to go back to my Thunderbolt.
OK. I did some digging. I recommend all users download an app called sensorly. It would appear that the reported signal strength by default is 4G. Currently, my 4G is is teetering at -100dBm to no signal and that shows on my phone as no bars. However, I discovered that my 3G is at -90 dBm (excellent coverage). From what I have researched it would appear that the phone has issues handshaking between 3G and 4G which I am sure will be corrected in an OTA update.
If I go to Settings-Wireless & Networks-More-Mobile Networks-Network Mode-CDMA/LTE and switch to CDMA only my bars come up and my dBm appears normal in settings.
I am pretty confident this is a LTE/3G handshake issue. Just like when you leave your home and you are still barely connected to wifi and the phone doesn't know what to use, so all of your apps fail trying to connect. I think it is just the same.
Anyway, I hope this helps others. It has made me less neurotic finding this out.
I had the rezound and returned it because of the headphone noise. Got the nexus and it gets terrible signal and speeds where the rezound was great. Called Verizon and they are sending me another Rezound and told me it shouldn't have the audio problems. We shall see. I just know that the nexus is unusable in my house due to reception.
Sent from my Galaxy Nexus using Tapatalk

Strange Antenna Issue

Today my phone started having some issues.
In places I was supposed to get full coverage and all bars I am know getting only 2 bars...
And in places I was getting 2 bars I get no signal at all !!!
I think it is an Antenna thing. Maybe it is broken, IDK...
What could I do? I have no warranty as I bought this phone 2 months ago in EUA and I live in Brazil...
Thankss
Anyone?? Help??
I've opened my phone and Everything seemed to be clear and OK.
One thing. When I get signal and start using the 3G a lot. The Signal DOES NOT go off.
This is very strange...
liquelt said:
Anyone?? Help??
I've opened my phone and Everything seemed to be clear and OK.
One thing. When I get signal and start using the 3G a lot. The Signal DOES NOT go off.
This is very strange...
Click to expand...
Click to collapse
Have you tried flashing the latest radio for the nexus? New ones were released recently for the .9 and .10 radios for verizon nexuses. I do not have knowledge of the gsm radios though.
Tempest228 said:
Have you tried flashing the latest radio for the nexus? New ones were released recently for the .9 and .10 radios for verizon nexuses. I do not have knowledge of the gsm radios though.
Click to expand...
Click to collapse
I am not on verizon.
I am using i9250UGLH1 radio.
Where can I get this .10 radio?
Thanks.
I'm also having the same issue. I have a maguro yakju variant galaxy nexus. I'm getting only 1-2 bars and have no warranty as I got it from ebay, gps is also showing problems, but the phone came in new sealed condition. Please let me know if there's a fix to this
It seems to be an Power Amplifier issue. I am gonna put in a Repair Store and they are going to try to fix my phone.
I am going to keep updating this too with the progress.
Thaaankss
What were the dbm stats? Your signal bar never tells the truth unless there is no service at all.
the signal bars are responing to dbm status.
I am checking both on the same time and I didnt get any anomalies betweent them...
I just put the phone to work in a place near home and they said it was an Power Amplifier issue and they're going to try fixing it.
Thanks.
I have exactly the same problem but my phone has only dealer warranty. Is there any chance to fix this through software?
If you have this exact same issue you cant fix it through software, because its an hardware problem...
It should be an hardware thing, if it isn't I don't know what else I could do.
Just updating...
My phone is now working. They changed the PA ( power amplifier) and now I have normal signal!
BUT, I am having two issues.
When I select "only use 2g networks" the phone than changes to edge and connects. When I deselect the 2g option the phone reconnects but it keeps on 2g. It does not switch to 3g...
I have to reboot the phone/radio.
AND,I am not getting 4G HSPA+ anywhere! Only HSDPA...
ANYONE????
Today I also have noticed problems with connection. I've very fresh GNx, had it with me at the office since Monday but today whole day was on GPRS. I thought it is an issue from the GSM network but after coming home where 3G should fly (and it does on Motorola Defy) my GNx was still on GPRS.
But when I make a call the data connection returns to 3G and some time after switches back to 2G.
If I leave phone somewhere where is better coverage it keeps 3G.
Meanwhile my Defy has 3G everywhere.
Shall I sent the GNx back to Amazon?
QDT said:
Today I also have noticed problems with connection. I've very fresh GNx, had it with me at the office since Monday but today whole day was on GPRS. I thought it is an issue from the GSM network but after coming home where 3G should fly (and it does on Motorola Defy) my GNx was still on GPRS.
But when I make a call the data connection returns to 3G and some time after switches back to 2G.
If I leave phone somewhere where is better coverage it keeps 3G.
Meanwhile my Defy has 3G everywhere.
Shall I sent the GNx back to Amazon?
Click to expand...
Click to collapse
Man,
If you are in warranty you should return your phone for them to fix/change...
Try changing radios before doing that. It can be software related!
liquelt said:
Man,
If you are in warranty you should return your phone for them to fix/change...
Try changing radios before doing that. It can be software related!
Click to expand...
Click to collapse
I'm on the same radio since beginning. And the same ROM was while phone kept 3G and now, when it is loosing it.
However, I wonder how much the network could influence the situation.
I've left overnight Nexus and Defy on the strongest coverage point and in the morning GNx was still at GPRS while Motorola switched from 3G down to GPRS.
I'm getting paranoid (and not talking about ROM). Restored phone clean via fastboot to factory state. Will be watching it over weekend and then decide what to do.
8 hrs later.
Phone kept weird for few hours at work and now flies with full range 3G. Also at home where yesterday it was switching to 2G.
I bet this was Vodafone way to thank me for cancelling my contract.
Gonna keep it at pure stock for an hour or two and then will change to some custom ROM... Maybe.
Updating again.
I've been testing my phone with the new "Power Amplifier" and now I can use my phone regularly.
The problem is... The phone does not support anymore the frequency of 850Mhz neither 3G or 2G.
I THINK they have put a PA that does not amplify this frequency.
My carrier uses: 2G:900/1800 3G:850/2100 3.5G(HSPA+):850Mhz mostly
So I understood why in some places I dont have any 3G coverage and in almost all places I can't get HSPA+ speeds.
Am I correct? Does the PA has to do w/ all this frequency thing?

How do I re-enable LTE

Hey all! Ok, so my gf has had this S2 from Koodo (Telus) since January. Out of the box it came with LTE/4G enabled and working fine. However, I rarely leave things alone and right away I installed TWRP, AOKP and I think, Tiberius Kernel. Have been using variations of each since. However, ever since I did that, the 4G hasn't worked. In the phone settings it says LTE/GSM Auto. However if I change it to anything else, like LTE ONLY, for example, it just stays at LTE/GSM auto. Nothing happens. So I am wondering how to get her 4G to work again since I know it is fully capable of it and my area does have working LTE.
santeana said:
Hey all! Ok, so my gf has had this S2 from Koodo (Telus) since January. Out of the box it came with LTE/4G enabled and working fine. However, I rarely leave things alone and right away I installed TWRP, AOKP and I think, Tiberius Kernel. Have been using variations of each since. However, ever since I did that, the 4G hasn't worked. In the phone settings it says LTE/GSM Auto. However if I change it to anything else, like LTE ONLY, for example, it just stays at LTE/GSM auto. Nothing happens. So I am wondering how to get her 4G to work again since I know it is fully capable of it and my area does have working LTE.
Click to expand...
Click to collapse
The t989d doesn't have lte. Doesn't have the hardware for it.
Sent from my cell phone telephone
Ok but my mother has the same phone (got them each one) but I haven't touched that one and it says 4G by the signal bars... Why is that?
Sent from my Nexus 4 using xda premium
santeana said:
Ok but my mother has the same phone (got them each one) but I haven't touched that one and it says 4G by the signal bars... Why is that?
Sent from my Nexus 4 using xda premium
Click to expand...
Click to collapse
4g is the same as H+ on custom roms. And now some say DC. Not sure why they left behind the 4g symbol, but its all the same thing. So if you see H+, DC or 4g, its all actually 4g.
You should be on GSM/wcdma preferred in mobile settings.
Sent from my cell phone telephone
kj2112 said:
4g is the same as H+ on custom roms. And now some say DC. Not sure why they left behind the 4g symbol, but its all the same thing. So if you see H+, DC or 4g, its all actually 4g.
Sent from my cell phone telephone
Click to expand...
Click to collapse
Oh ok! Thanks!
Sent from my Nexus 4 using xda premium
I have sorta the same problem, except I have a tmobile s2 t989. I flashed cm 10.1 nightlies and the newest radio. Phone works good except my phone no longer shows the 4G symbol above the signal bars. It instead says 3G. Before rooting it said 4G above the signal bars. Every once in a while it says DC. Any advice?
iMacMane said:
I have sorta the same problem, except I have a tmobile s2 t989. I flashed cm 10.1 nightlies and the newest radio. Phone works good except my phone no longer shows the 4G symbol above the signal bars. It instead says 3G. Before rooting it said 4G above the signal bars. Every once in a while it says DC. Any advice?
Click to expand...
Click to collapse
Explained the symbols in posts above. And if you are getting a lot of 3g....that's reception. Your losing your 4g connection and its picking up 3g. Usually for this to happen you'd only be getting about 1 bar on your signal.
Sent from my cell phone telephone
kj2112 said:
Explained the symbols in posts above. And if you are getting a lot of 3g....that's reception. Your losing your 4g connection and its picking up 3g. Usually for this to happen you'd only be getting about 1 bar on your signal.
Sent from my cell phone telephone
Click to expand...
Click to collapse
I appreciate the info. I live in Orlando and I'm pretty sure we have tmobiles 4g or hspa+. I was just wondering why I'm only getting 3G date speeds instead of 4G speeds. The internet still seems relatively fast but wanted to make sure the phone wasn't slowing down the speeds to 3G speeds.
iMacMane said:
I have sorta the same problem, except I have a tmobile s2 t989. I flashed cm 10.1 nightlies and the newest radio. Phone works good except my phone no longer shows the 4G symbol above the signal bars. It instead says 3G. Before rooting it said 4G above the signal bars. Every once in a while it says DC. Any advice?
Click to expand...
Click to collapse
Aosp ROMs run on 3g (umts) until data is called. Once data is called it will pull up h+(hspa+)or dc(dc-hspa) depending on your area. Its a battery saving feature and the stock Samsung ROMs show 4g all the time. Unless on edge or GPRS. I think even touchwiz ROMs went to umts while idle.
sent from my t989 hercules

[Q] T-Mobile SM-P607T - cannot connect to 2G/Edge network?

Hello gang,
I picked up a new T-Mobile Note 10.1 2014 edition 2 days ago. So far, everything seems to be great. There is one issue however that seems perplexing. My tablet connects to 4G and LTE networks just fine but for some reason, it will not connect to 2G/Edge networks near my home. I live in a rural part of PA where T-Mobile doesn't have 4G/LTE coverage. My Samsung Galaxy S3 connects to the Edge network near my house without issue. However, my tablet does not connect and simply shows a small X where the signal meter is.
I spoke to T-Mobile tech support this morning and they seem to think that the band covering 2G may be dead. Could this be possible when 4G and LTE work just fine?
Also, the options under Network mode are now limited to 2: LTE/WCDMA (auto connect) and WCDMA only. My SGS3 has a GSM only option which the tablet seems to be missing.
I am running Android 4.4.2. Any thoughts / suggestions?
Thanks!
amstel78 said:
Hello gang,
I picked up a new T-Mobile Note 10.1 2014 edition 2 days ago. So far, everything seems to be great. There is one issue however that seems perplexing. My tablet connects to 4G and LTE networks just fine but for some reason, it will not connect to 2G/Edge networks near my home. I live in a rural part of PA where T-Mobile doesn't have 4G/LTE coverage. My Samsung Galaxy S3 connects to the Edge network near my house without issue. However, my tablet does not connect and simply shows a small X where the signal meter is.
I spoke to T-Mobile tech support this morning and they seem to think that the band covering 2G may be dead. Could this be possible when 4G and LTE work just fine?
Also, the options under Network mode are now limited to 2: LTE/WCDMA (auto connect) and WCDMA only. My SGS3 has a GSM only option which the tablet seems to be missing.
I am running Android 4.4.2. Any thoughts / suggestions?
Thanks!
Click to expand...
Click to collapse
I can't state this as a fact for the tmo P607T but remember that the tmo 3g version of the
Samsung galaxy tab plus 7.0 had a similar situation. Users were looking to add phone functions
to this device.
Turned out on the xda threads that the tmo tab plus 7.0 had no hardware
to support phone functions as the international version did.
amstel78 said:
Hello gang,
I picked up a new T-Mobile Note 10.1 2014 edition 2 days ago. So far, everything seems to be great. There is one issue however that seems perplexing. My tablet connects to 4G and LTE networks just fine but for some reason, it will not connect to 2G/Edge networks near my home. I live in a rural part of PA where T-Mobile doesn't have 4G/LTE coverage. My Samsung Galaxy S3 connects to the Edge network near my house without issue. However, my tablet does not connect and simply shows a small X where the signal meter is.
I spoke to T-Mobile tech support this morning and they seem to think that the band covering 2G may be dead. Could this be possible when 4G and LTE work just fine?
Also, the options under Network mode are now limited to 2: LTE/WCDMA (auto connect) and WCDMA only. My SGS3 has a GSM only option which the tablet seems to be missing.
I am running Android 4.4.2. Any thoughts / suggestions?
Thanks!
Click to expand...
Click to collapse
The GSM mode only makes it so you can force the Device into 2g or Edge mode. If you do not want to use LTE just pick WCDMA which is 3g/HSPA+ and GSM(2g/edge). If you are looking to turn off the T-Mobile data part Pull the Sim card out or just put the Tablet into Airplane mode which you can till turn on Wifi. I bought my Note just for Wifi, and using EIP. So i am not using it with T-Mobile Data. getting a data plan on the tablet is a big waste when you can just hotpsot your phone.
Prod1702 said:
The GSM mode only makes it so you can force the Device into 2g or Edge mode. If you do not want to use LTE just pick WCDMA which is 3g/HSPA+ and GSM(2g/edge). If you are looking to turn off the T-Mobile data part Pull the Sim card out or just put the Tablet into Airplane mode which you can till turn on Wifi. I bought my Note just for Wifi, and using EIP. So i am not using it with T-Mobile Data. getting a data plan on the tablet is a big waste when you can just hotpsot your phone.
Click to expand...
Click to collapse
Well, it turns out that my tablet is defective. T-Mobile is sending me a replacement. I spoke to several tier 2 techs including one Samsung specialist and they all concurred that the band governing 2g on my Note must be inoperative. Weird right?
Well I got my replacement Note in the mail yesterday and it also will not connect to the 2G/Edge network near my house. I highly doubt I could have gotten 2 bad tablets in a row so there's something else amiss here. Perhaps the specs on T-Mo's website is incorrect and this new device simply doesn't have the capability to go to 2G/Edge or the modem firmware being used is a crippled version.
Very disappointed to say the least; yes Edge is horrendously slow but can be beneficial in a pinch sometimes. Any thoughts?
amstel78 said:
... or the modem firmware being used is a crippled version. ... Very disappointed to say the least; yes Edge is horrendously slow but can be beneficial in a pinch sometimes.
Click to expand...
Click to collapse
Yeah, I think you're right; despite unlocking mine and using it on AT&T (which does have better coverage), there's places on my commute where there's 4 bars, yet no data transfer. I've yet to see an "E" or "3G" symbol, either.
I'm thinking about trying to flash the P605M radio, but that'll have to wait 'till the weekend.
kcrudup said:
Yeah, I think you're right; despite unlocking mine and using it on AT&T (which does have better coverage), there's places on my commute where there's 4 bars, yet no data transfer. I've yet to see an "E" or "3G" symbol, either.
I'm thinking about trying to flash the P605M radio, but that'll have to wait 'till the weekend.
Click to expand...
Click to collapse
Please keep me posted on your results if you do end up flashing the modem. I'd be very interested to see what you discover.
I wonder if this move by T-Mo to cut 2g/Edge compatibility has something to do with their rumored intention of converting all of their 2g spectrum to 4g? Even if that were true though, that precludes using this as an unlocked device in other areas or countries that may only have 2g/3g coverage. What about data roaming?
amstel78 said:
Please keep me posted on your results if you do end up flashing the modem. I'd be very interested to see what you discover.
Click to expand...
Click to collapse
Well, turns out that I might put that off a little bit later than the weekend- I've since had mine unlocked and as it gets the VZW LTE bands, I'm going to see how well it does on that (VZW drops back to CDMA in non-LTE areas, so I'd be completely without service). VZW LTE is pretty ubiquitous from what I'd seen with my OG Xoom, but if it turns out I lose service on the train in large spots I'll revisit GSM options again.
Besides, I might just flash the radios just to see what happens

Weak antenna?

Seeing 4 bars of LTE signal strength on my phone is like seeing a unicorn.
I live in Upstate NY and I have the A705MN phone.
I have tried three different sim cards, all of them of course GSM compatible. The result is exactly the same among all three. I typically get 1 or 2 bars LTE.
My previous phones under the same carrier and same sim card were typically 4-5 bars. (The Wifi strength, BTW, is equal to what I've seen from my other phones.)
What can I do to improve the signal strength?
I've seen posts by those with S10's where they do something to disable specific bands. But I'm not sure how to do that on the A70 phone. I've tried the specific codes that were mentioned in threads for the S10, but those codes do not work on the A70.
Please help. As much as I like the Samsung otherwise, this factor might be the reason I return the phone.
Yes same problem here
106IFA said:
Seeing 4 or 5 bars of LTE signal strength on my phone is like seeing a unicorn.
I live in Upstate NY and I have the A705MN phone.
I have tried three different sim cards, all of them of course GSM compatible. The result is exactly the same among all three. I typically get 1-3 bars LTE.
My previous phones under the same carrier and same sim card were typically 4-5 bars. (The Wifi strength, BTW, is equal to what I've seen from my other phones.)
What can I do to improve the signal strength?
I've seen posts by those with S10's where they do something to disable specific bands. But I'm not sure how to do that on the A70 phone. I've tried the specific codes that were mentioned in threads for the S10, but those codes do not work on the A70.
Please help. As much as I like the Samsung otherwise, this factor might be the reason I return the phone.
Click to expand...
Click to collapse
Try LTE only settings in settings>connections.
senseijtitus said:
Try LTE only settings in settings>connections.
Click to expand...
Click to collapse
Thank you for the screenshots.
I edited the access point that I'm using and changed it to LTE. But then when I go to select network mode, I cannot chose LTE Only. That option does not show up. I have tried rebooting after editing and selecting the Access Point, and I still do not see that option.
I have tried using apps such as 4g Network Only and have switched to LTE only, but that change does not seem to make a difference or the network goes down altogether.
Any suggestions?
senseijtitus said:
Try LTE only settings in set5ings>connections.
Click to expand...
Click to collapse
There was a post in the forum for using settings editor app to enable LTE only option. It will enable this option for both sims.
senseijtitus said:
There was a post in the forum for using settings editor app to enable LTE only option. It will enable this option for both sims.
Click to expand...
Click to collapse
I haven't been able to do this or find what it is you're referring to. I've tried adding a few values through Settings editor apps. Values such as "hw_networkmode_preference" etc.
Doesn't work.
But besides, why would setting the connection to LTE only fix this problem? I don't see how this is not a herring.
Most of the times I am see 2 bars of strength. Every now and then I get 3 bars, and more frequently than that I get only 1 bar. 4 bars is quite rare.
The real problem with this antenna is that if I step inside a supermarket or bathroom then my connection is gone. If I'm traveling around the state of NY, in more remote areas, I'm sure I will not have a chance of any connection.
I would LOVE this phone if it had a better antenna. I can deal with the subpar fingerprint reader. Just give me a strong antenna like all of my previous phones and then I'd be a happy camper!
I decided not to return the phone so I am stuck with this phone.
106IFA said:
I haven't been able to do this or find what it is you're referring to. I've tried adding a few values through Settings editor apps. Values such as "hw_networkmode_preference" etc.
Doesn't work.
But besides, why would setting the connection to LTE only fix this problem? I don't see how this is not a herring.
Most of the times I am see 2 bars of strength. Every now and then I get 3 bars, and more frequently than that I get only 1 bar. 4 bars is quite rare.
The real problem with this antenna is that if I step inside a supermarket or bathroom then my connection is gone. If I'm traveling around the state of NY, in more remote areas, I'm sure I will not have a chance of any connection.
I would LOVE this phone if it had a better antenna. I can deal with the subpar fingerprint reader. Just give me a strong antenna like all of my previous phones and then I'd be a happy camper!
I decided not to return the phone so I am stuck with this phone.
Click to expand...
Click to collapse
Setting the band to lte only would help in better reception even at low signal strength. One thing I had noticed in lte band is its consistency in connection speeds and call quality even with low signal. I think this is because of the high bandwidth of the lte signals. But I'm not an expert in it. Try changing the band to lte only. It should work better.
senseijtitus said:
Try LTE only settings in settings>connections.
Click to expand...
Click to collapse
Where did get this theme and icons in screen shots ?
Maystro said:
Where did get this theme and icons in screen shots ?
Click to expand...
Click to collapse
Bodhosativa theme from xda apps section.
senseijtitus said:
Setting the band to lte only would help in better reception even at low signal strength. One thing I had noticed in lte band is its consistency in connection speeds and call quality even with low signal. I think this is because of the high bandwidth of the lte signals. But I'm not an expert in it. Try changing the band to lte only. It should work better.
Click to expand...
Click to collapse
But I'm trying to get better signal, rather than better reception with low signal.
There's got to be something wrong with my phone. It blacks out if I step inside a bathroom in a building and such and it's very rarely at 4 bars.
A thing I noticed. If I go and select 2g/3g only (switch off 4g lte) my signal reception instantly switches to full (4 bars) Usually I get around 2 bars with LTE active.
The strange part is that even with lte off I can still receive an lte 4g signal when outside..this is perfect for me as it means i have a really strong signal (reception) indoors but still have the benefit of 4G outside. I don't quite understand it tbh. I mean i have switched to "2g/3g only" yet i still see 4G pop up in the status bar on my commute, and it definitely receiving 4G speeds. I'm not sure if it's a bug or not but I kinda like it.
Con500 said:
A thing I noticed. If I go and select 2g/3g only (switch off 4g lte) my signal reception instantly switches to full (4 bars) Usually I get around 2 bars with LTE active.
The strange part is that even with lte off I can still receive an lte 4g signal when outside..this is perfect for me as it means i have a really strong signal (reception) indoors but still have the benefit of 4G outside. I don't quite understand it tbh. I mean i have switched to "2g/3g only" yet i still see 4G pop up in the status bar on my commute, and it definitely receiving 4G speeds. I'm not sure if it's a bug or not but I kinda like it.
Click to expand...
Click to collapse
That's a terrific idea. Thank you for bringing that up.
I am implementing your suggesteion and it's nice to see 3-4 bars of strength again.
I don't need the fastest data connection. I just need a strong or secure basic data connection, since most of the time I'm not doing anything data intensive with my phone anyway when I"m away from a wifi connection.
But I'm not sure if my phone hops up to LTE at anytime.. I wish had the same "bug" that you do. I just started testing with your settings so I'll see if I can get it so that 3g is the preferred and basic network and 4g is the optional...
After another day, I'm back to LTE/3g/2g auto.
The general reception even for 3g or 2g is lower overall than what I saw from every other phone I have used. So in areas where I can expect to have a relatively low signal I get a particularly low signal for all bands, 4g, 3g, and 2g. That being the case, there's no practical difference if I cap my connection or not.
Samsung better warranty this phone. Does anyone know who I should call?
Since I bought my phone through an Ebay seller and the phone is West Carribean stock, not USA stock, which is where I am, I have no warranty on this phone.

Categories

Resources