[Q] EXT4 from CWM????? - Desire Q&A, Help & Troubleshooting

Hi,
I have problem...
I tried to install Cool3D RunnyMede v5 ROM,which needs EXT4, but I have made mistake and forgot to create ext4 partition and installed ROM - so it couldnt start...
After powering phone ON it stops at HTC logo - i need to pull out battery.
After that I can go to HBOOT and to recovery.
I tried to wipe cahce,factory reset -nothing hepled - it still stucks at htc logo
I would like to ask you,if it is posible to create ext4 partition in this state of phone- because i cant get to my SD card (windows dont recognize storage),and I cant power phone to home screen...
Is it posiible to fix this problem (to make phone working) or create EXT4 partition from CMW(I have Revolutionary CWM 4.0) or from computer (ADB or something,im not expert in this stuff, im just guide follow monkey)...
I appreciate your help,im desperate
Thank you

ivipopi said:
Hi,
I have problem...
I tried to install Cool3D RunnyMede v5 ROM,which needs EXT4, but I have made mistake and forgot to create ext4 partition and installed ROM - so it couldnt start...
After powering phone ON it stops at HTC logo - i need to pull out battery.
After that I can go to HBOOT and to recovery.
I tried to wipe cahce,factory reset -nothing hepled - it still stucks at htc logo
I would like to ask you,if it is posible to create ext4 partition in this state of phone- because i cant get to my SD card (windows dont recognize storage),and I cant power phone to home screen...
Is it posiible to fix this problem (to make phone working) or create EXT4 partition from CMW(I have Revolutionary CWM 4.0) or from computer (ADB or something,im not expert in this stuff, im just guide follow monkey)...
I appreciate your help,im desperate
Thank you
Click to expand...
Click to collapse
Go to Gparted site http://gparted.sourceforge.net/download.php Download and burn it to CD or DVD. You will need an SD card adapter, when Gparted is on CD boot PC from CD and re-partition your card. You will need to enter BIOS if PC dont already start from dik and set it has first boot.
Before partition remember Backup data if you can.

or you could use ext4 recovery from the development thread - flash via fastboot. plenty of guides for that. I suggest you avoid the touch recovery for now as its not too stable (too large - bad blocks could cause brick...)

Thank you,
I have solved the problem - I found in recovery something like mount storage, and then i could acces to SD card,and then i flasthed EXT4 recovery...
Throught ext4 recovery i created EXT4 partition (it fprmated my sd card).
But it didnt solved the problem, maybe it was ROM problem,because I installed then Insertcoin,and it worked...
But thanks for answers anyway...

ivipopi said:
Thank you,
But it didnt solved the problem, maybe it was ROM problem,because I installed then Insertcoin,and it worked...
Click to expand...
Click to collapse
did you use the correct version for your hboot - as in the cm7r2 version if you have that hboot or stock hboot version.... also I'd suggest an sdext partition of at least 1024 (i like 2048 personally but i have a 16gb class 6 sdcard) for all sense 3.0/3.5 ROMs
I suggest you go and look at the "requirements" of the ROM you were trying to install, and ensure you have done a full wipe, and do not restore anything until after a couple of boots...

Related

[Q] Starting off new ?

Hello everyone,
I have rooted my Desire a long time ago, now I want to try out a few custom ROMs. However, I think I made a few mistakes because Data2SD doesn't work for me.
Can i just start off new ? For example just running UnrevokedĀ³ again ?
If yes : Why doesn't UnrevokedĀ³ work ? It just says "Error: failed to get root. Is your firmware too new?". Currently I have installed Android 2.3.3 SuperNova ROM. My H-BOOT version is "HBOOT-0.75.0000". I think my Display is SLCD.
Thanks in advance !
Cheers Limette =)
if you are already rooted, this is what unrevoked should show.
anyway, your root was succesful, and it has got nothing to do with Data2SD.
if for some reason you think it might not work, make sure you have EXT partition AFTER fat32 one. and make sure it works ok, Gparted for example.
other than that you should provide more info, like what you did with your sdcard (how did you partition it, what layout etc.) and why do you think it is not working.
Thanks for your reply.
Actually I did partition the SD card how the tutorial told me to.
1st partition = ~14GB FAT32
2nd partition = 1GB EXT4
Then I installed the custom ROM and booted once. Then i went into Recovery mode and installed Data2SD installer. Everytihng should be ok so far, but the Phone wont boot after that, even tho the blue LED flashes. So I thought starting off new would be a good idea ^^.
So Umm, now I'm not quite sure what to do :O
Thanks in advance.
Cheers Limette.
well, a good thing to try now is installing some other ROM (possibly one with DATA2XXX already included) and checking if this works
also, what rom are you trying to flash
and have you used any aligment.zip flashable that were supposed to do some cool stuff with your ext ?
I only tried this ROM so far : http://forum.xda-developers.com/showthread.php?t=1045824
Here is what I did :
1. Partition my SD card ( 14GB FAT32 primary, 1GB EXT4 primary)
2. Recovery mode -> install zip from SD card -> new radio version
3. Reboot
4. Recovery mode -> install zip from SD card -> SuperNova ROM
5. Reboot
6. Recovery mode -> install zip from SD card -> Data2SD installer
7. Reboot (system is stuck here)
If I remove the SD card the SD card the system will boot and if I dont even install Data2SD system will also boot. It just wont boot if Install Data2SD. I did nothing more.
However, I just tried to install InsertCoin CM7 but that won't even start at all. Thats pretty much the reason why I'm trying to redo all of my first steps. Or do you think my problem is somewhere else?
please let me know if you need more information and thanks for your help so far
Cheers Limette
insertcoin CM7 version would require you to be s-off and running custom hboot (partition layout in phone) so that is why it is not booting up.
try insertcoin A2SD+ STOCK HBOOT, if it works, then your EXT is fine, if not then i suggest you double check it.
Limette said:
I only tried this ROM so far : http://forum.xda-developers.com/showthread.php?t=1045824
Here is what I did :
1. Partition my SD card ( 14GB FAT32 primary, 1GB EXT4 primary)
2. Recovery mode -> install zip from SD card -> new radio version
3. Reboot
4. Recovery mode -> install zip from SD card -> SuperNova ROM
5. Reboot
6. Recovery mode -> install zip from SD card -> Data2SD installer
7. Reboot (system is stuck here)
If I remove the SD card the SD card the system will boot and if I dont even install Data2SD system will also boot. It just wont boot if Install Data2SD. I did nothing more.
However, I just tried to install InsertCoin CM7 but that won't even start at all. Thats pretty much the reason why I'm trying to redo all of my first steps. Or do you think my problem is somewhere else?
please let me know if you need more information and thanks for your help so far
Cheers Limette
Click to expand...
Click to collapse
Hboot 0.75 means you are still s-on so InsertCoin cm7 will never work for you.
I suggest you to soff (read some tutorial first) and flash cm7 hboot.
Then u will be able to flash IC cm7. With that version u will not need those weird data2something scripts
Thanks for the replies !
I just tried the InsertCoin A2SD v20 ROM its booting but its not working correctly. I get crash messages like every 3 seconds
"The process android.process.acore has stopped unexpectedly. Please try again"
I might try to S-OFF my phone after i read the tutorial. But until then, do you guys know what I did wrong ?
Cheers Limette
Few people with hboot below 0.93 experienced some problems with installing gb roms.
1. What is your recovery? AmonRa or CWM and what version?
2. Would you consider using Froyo rom? They are extremely optimized and stable, while gb still have some glitches.
3. You can of course s-off, but i'd check/repartition sd card first. Stick with ext3 partition for now, a bit more support for it if you get mad with flashing different roms
tinky1 said:
Few people with hboot below 0.93 experienced some problems with installing gb roms.
1. What is your recovery? AmonRa or CWM and what version?
2. Would you consider using Froyo rom? They are extremely optimized and stable, while gb still have some glitches.
3. You can of course s-off, but i'd check/repartition sd card first. Stick with ext3 partition for now, a bit more support for it if you get mad with flashing different roms
Click to expand...
Click to collapse
Thanks for your reply
1. CWM v2.5.0.1
2. I used a Froyo ROM for like 9 months now ^^ So I want to try Gingerbread out ^^
3. I'll try to repartition my SD card with Ext3 , if that won't help I'll try to S-OFF my Phone.
I'll let you know if it worked.
Cheers Limette.
I managed to Fix the Error message "The process android.process.acore has stopped unexpectedly. Please try again". I accidentally forgot to wipe all data before flashing :$
Thanks for all the help =)
you wrote you have clockworkmod recovery 2.5.0.1 ? you sure it is not 2.5.0.7 ?
anyways, both of them are really old, and this can cause bootloops when new updater script is used in a flashable.zip file
since you are S-ON, you cant premanently flash new recovery, but you can fake-flash which is putting clockworkmod_3.0.2.8.zip file on sdcard, and then flashing it while in 2.5.0.7(or .1) and this will boot up the newest version (but you have to do this everytime you enter recovery)
then you can try flashing both ROM you chose and the DATA2SD installer with 3.0.2.8, this might fix it
http://www.deltaxent.com/rb/recovery-clockwork-3.0.2.8-bravo.zip
CRC-32: 6a0885a9
MD4: a883bac75062e139cbee8674eec73c6f
MD5: ac6a2f71de8a8a0d7d9f6799e079a2b6
SHA-1: cba6c646a05ac611015306581751c90bb6dcd73d

[Q] HTC Desire unable to mount SD card

Hi All,
I have a problem with my SD card. My phone doesn't recognise SD card after I created ext4 partition through partition magic on windows 7. Here is what happened.
- I have rooted desire running CM 7.0.3.
- I wanted to go back to Starburst 1.4 rom.
- I have class 4 16 gb sd card (fat + ext3) with 512 mb of ext3 and rest fat32 (this was when everything was running good)
- I flashed the new rom through CWM, but only got like 54 mb on sd left.
- So I manually formatted ext3 and changed it to ext4 using partition magic on windows 7 (connected sd card through a reader).
- After that I flashed the new rom, but still got the same size left.
- After that I went back to CM7.0.3 which is working fine for me.
However, at this time, my phone doesn't recognise my SD card.
- I saw that I can't format ext in recovery as i get this error
E:Can't mount /dev/block/mmcblk0p2(File exists)
Error mounting SDEXT: !
I believe I was able to install CM7.0.3 coz it was a small rom was fit directly into phone's internal memory.
At this time, I can't see my SD card on phone. Can't play music or install any files or anything.
Looking for some quick help.
Thanks,
Satyam
Hi,
I had the same problem.
I got someone to format my SD card in there phone, then reverthing worked.
Regards
Matt
topgunmatt said:
Hi,
I had the same problem.
I got someone to format my SD card in there phone, then reverthing worked.
Regards
Matt
Click to expand...
Click to collapse
Hi Matt,
So are you saying that you got your SD card formatted by someone else using Rom Manager ?
- As of now, when I click on the inbuilt ROM Manager in CM7, it says " The SD Card needs to be mounted to use ROM Manager!"
That means my SD card is abviously not read by my phone.
Looking for some help. I don't want to do something silly at this time.
Atleast, as of now my phone is not bricked and is working, just the SD is not.
Any suggestions/comments or link to my problem is more than welcome.
Thank You
Hmmm, i smell another usb brick here, we've had so many these days, and all by people using cwm and flashing gb sense roms...just to prove i'm right, can you connect the phone to your pc? If you're not able to do that, then u have 100% chance it's a usb brick.
OMG !! yeah you're right.. now when I connected my phone using a USB, it doesn't give me the option to "mount USB".
What do to from here ? I don't know what is a USB brick and am pretty poor with linux commands !!!
Plz help.. However I can see a a couple of ROMs through recovery mode in my SD card, but can't flash those which require an EXT.
Plz help !!!!!
sroy001 said:
OMG !! yeah you're right.. now when I connected my phone using a USB, it doesn't give me the option to "mount USB".
What do to from here ? I don't know what is a USB brick and am pretty poor with linux commands !!!
Plz help.. However I can see a a couple of ROMs through recovery mode in my SD card, but can't flash those which require an EXT.
Plz help !!!!!
Click to expand...
Click to collapse
Haha, calm down its'no biggie believe me
Here you can find a tutorial on how to fix it: http://forum.xda-developers.com/showthread.php?t=691639
Feel free to ask if you need further help (bus is farkin boring).
vnvman said:
Haha, calm down its'no biggie believe me
Here you can find a tutorial on how to fix it: http://forum.xda-developers.com/showthread.php?t=691639
Feel free to ask if you need further help (bus is farkin boring).
Click to expand...
Click to collapse
Hi,
Are you saying that formatting SD card and making fresh ext partition through a media reader will not help in this case ?
I am very confused so to say.. I read the link that you posted, it talks about CID which I'm not able to find.. Can't see that option in fast boot (recovery).
Is there some other way to fix all this ?
Any more tricks/ suggestions are more than welcome..
Please see detailed info about my issue in the post
sroy001 said:
Hi,
Are you saying that formatting SD card and making fresh ext partition through a media reader will not help in this case ?
I am very confused so to say.. I read the link that you posted, it talks about CID which I'm not able to find.. Can't see that option in fast boot (recovery).
Is there some other way to fix all this ?
Any more tricks/ suggestions are more than welcome..
Please see detailed info about my issue in the post
Click to expand...
Click to collapse
Nope: i'm sorry but there is no other way...the problem lies in the misc partition, and that one doesn't get touched by simply toying with your sd, it's on nand, and no rom flashing/nandroid restore can touch it either. This process is the only way to go. CID can be obtained via adb command, i hope you'll have it installed and set up correctly.
i just fixed my brick lol . i found out bcuz i coulnt enable bluetooth
vnvman said:
Nope: i'm sorry but there is no other way...the problem lies in the misc partition, and that one doesn't get touched by simply toying with your sd, it's on nand, and no rom flashing/nandroid restore can touch it either. This process is the only way to go. CID can be obtained via adb command, i hope you'll have it installed and set up correctly.
Click to expand...
Click to collapse
Hi,
Okay I get it.. I need to fix my nand partition, now question -
1) I can figure out the 1st step "Find out your CID. Go into fastboot mode, and do 'fastboot oem boot" - Nothing happens when I click on fast boot option in recovery mode. The other method CID generator also asks for CID.. how do I get that.. that's my biggest question.
2) How can I see the rom version.
I know, I might me sounding stupid, but I'm not a pro.. used to love flashing new ROMs earlier and this time I just messed it up.
Need some step-by-step help.. I might be asking for too much, but I trust this forum and believe Android has too many fans hooked to it.. so I will get some help
sroy001 said:
Hi,
Okay I get it.. I need to fix my nand partition, now question -
1) I can figure out the 1st step "Find out your CID. Go into fastboot mode, and do 'fastboot oem boot" - Nothing happens when I click on fast boot option in recovery mode. The other method CID generator also asks for CID.. how do I get that.. that's my biggest question.
2) How can I see the rom version.
I know, I might me sounding stupid, but I'm not a pro.. used to love flashing new ROMs earlier and this time I just messed it up.
Need some step-by-step help.. I might be asking for too much, but I trust this forum and believe Android has too many fans hooked to it.. so I will get some help
Click to expand...
Click to collapse
Also just want to let the forum know that I'm running a custom ROM (CM 7) and don't see the option of software info under Settings>About phone. Any other way to find out rom version ???????/
Ok, sorry man, i was out for a ride
To see the CID you have to type "fastboot oem boot" in the terminal, after navigating to the path where you have the sdk, for example:
"cd c:/sdk/tools"
"fastboot oem boot"
Then you should get all the info, together with the CID ofc...obviously you need to have adb installed and working in order to do that (there ia a lot of tutorials for that, just use the search function).
As to rom version, you don't need it, just download the mtd0.img, open it with the hex editor and mod it with your CID, then go for the next step
I dont believe you have bricked your phone, i think you have created a partition on it without making it a primary partition along with the fat32 parition.
boot into recovery and mount your SD card to your PC. Reformat the whole card and then it should work again, you may just be able to go into your partition software and amend to show 'primary' on each, if not read on. Couple of options then, download ROM manager from the market and reformat the ext3 using rom manger if not do it via your windows software but make sure both partitions are set to 'Primary'.
vis-tec said:
I dont believe you have bricked your phone, i think you have created a partition on it without making it a primary partition along with the fat32 parition.
boot into recovery and mount your SD card to your PC. Reformat the whole card and then it should work again, you may just be able to go into your partition software and amend to show 'primary' on each, if not read on. Couple of options then, download ROM manager from the market and reformat the ext3 using rom manger if not do it via your windows software but make sure both partitions are set to 'Primary'.
Click to expand...
Click to collapse
It's a usb brick, not a plain brick: when you plug it to pc the phone usually doesn't even light up the led.
sorry, i read that he had full use of his phone bar the SD card
- I saw that I can't format ext in recovery as i get this error
E:Can't mount /dev/block/mmcblk0p2(File exists)
Error mounting SDEXT: !
Click to expand...
Click to collapse
hi, seems you got bad partition on your sd card, since it s normal that you can't mount sd while plug on usb.
did you already put out your sd card out the phone and try to read it with a usb scard reader plug on your computer??
cid error mean you have messed-up your misc partition which is the one in your nand where the recovery is located... didn't see any error about this in your thread...
in the boot, should fail with error misc partiton cid unknown etc...
have a try about sd card reader it's easer than misc error fix
give a try on this site and try using gparted cd live... don't need to be expert in linux command (it s a graphical interface) should you know that FIRST FAT32 PRIMARY partition and LAST EXT3 (is less fast but really more stable and relyable fs) PRIMARY partition
hi, still me sorry for spamming, just found a nice TUT using gparted on xda http://forum.xda-developers.com/showthread.php?t=535914
fragargon said:
hi, seems you got bad partition on your sd card, since it s normal that you can't mount sd while plug on usb.
did you already put out your sd card out the phone and try to read it with a usb scard reader plug on your computer??
cid error mean you have messed-up your misc partition which is the one in your nand where the recovery is located... didn't see any error about this in your thread...
in the boot, should fail with error misc partiton cid unknown etc...
have a try about sd card reader it's easer than misc error fix
give a try on this site and try using gparted cd live... don't need to be expert in linux command (it s a graphical interface) should you know that FIRST FAT32 PRIMARY partition and LAST EXT3 (is less fast but really more stable and relyable fs) PRIMARY partition
Click to expand...
Click to collapse
Fixing misc doesn't take more than a minute if you have a working adb...repartitioning micro sd card takes loads of time instead, especially if it's big, coz you have to backup all of your data then copy them back, and that's a pain, especially if the sd isn't very fast.
Anyway you might be right there, just the other day a guy had a similar issue caused by multiple ext partitions not being recognized properly. I just thought it was a usb brick coz it's very common since the new gb sense roms rolled out and people started partitioning like crazy with cwm (which really SUCKS at that), and this either cause misc corruption or messed partitions on sd card: i'd suggest everyone to partition with amon them flash back any 3.0+ cwm to flash the rom, if you don't have the chance of using linux live cd (but you really should).
All sorted --------- RESLOVED !!!!
Okay Listen all Desire Owners-- I was able to fix this USB brick without having to go through all which was available on internet..
What I did -
1) Came home and formatted my EXT4 to ext3 and simply reflashed cm7 rom
All worked like charm - Now My SD card is mountable and works perfectly
Good for you
Anyway make sure you set up adb properly on your pc, it will save your life some day: it takes a while but it's worth it...i wouldn't get inti the rom flashing thing without it. Just a suggestion
Bests.

[Q] Stuck on start HTC screen (start screen)

So i installed http://forum.xda-developers.com/showthread.php?t=1040121
i rooted my phone yesterday and today tried install that rom i installed it with
http://theunlockr.com/2010/09/21/how-to-load-a-custom-rom-on-the-htc-desire-2/ guide after install it said it was succesfully installed and i tried reboot it and now i cannot open it normally.
I can go recovery mode by pressing power + volume down
Can some1 help me what should i do?
In most circumstances it is because your sd card is not properly formatted or you have flashed the wrong data table. I think it is probably becuase of the sd card, make sure you format with a fat 32 and a ext4 partition. You can do this very easily with your recovery program or with gparted. If this fails I would flash a simple rooted rom to get the phone up and running and then read the forum. I assure you that is is not as complicated as it all seems
can some1 give me link for guide to format with a fat 32 and a ext4 partition
or simple rooted rom to i can get my phone back to work?
This is a rooted stock rom
http://forum.xda-developers.com/showthread.php?t=833310
Download this, put it on your sd card and flash it exactly as you flashed your previous rom, this will get the phone working again. I would then simply download and install Clockwork Mod recovery or 4ext recovery, both these will sort you sd card out. You simply want a fat32 with a 1gb ext 3 partition. Once this has been done you can then look at installing more complex roms.
If you get stuck lt me know and I will try and help, I was in the same place a year ago!!!!
Sorry, use this rooted rom as the other link requires sd ext
http://forum.xda-developers.com/showthread.php?t=741775
everything u need is in this thread, videos too (ext4 with Gparted, see Step 5)
http://forum.xda-developers.com/showthread.php?t=1016084
denatwork said:
everything u need is in this thread, videos too (ext4 with Gparted, see Step 5)
http://forum.xda-developers.com/showthread.php?t=1016084
Click to expand...
Click to collapse
how that will help when i cannot even open my phone exept recovery mode
tonil92 said:
how that will help when i cannot even open my phone exept recovery mode
Click to expand...
Click to collapse
.... because you're partitioning your SD-CARD.. and as far as I know that can be taken out of the phone no?
you can use gparted or minitool partition wizard (google the names). Most ROMs require a minimum of 512mb EXT Partition but 1GB is advisable. EXT3 is preferable, as the faster EXT4 is not compatible with all ROMS
u've asked for the link... i'gave u the link...
use a cardreader and boot not from ur smart, but from usb and do the same steps as in video described

[Q] stuck at htc logo boot screen

hi guys i recently flash the ext3 alignment.zip from leedroid and after that i got stuck at whith screen with htc logo. when i try to boot up with my sdcard removed, its able to boot up. Also when i plug in another sd card it can boot up too normally. does it mean my sd card is the problem. because when i insert the sdcard to my card reader its able to read the card.
Its a known issue with flashing that zip. How did you partition it in the first place?
You now have to reformat the ext. Best bet, gparted.
rootSU said:
Its a known issue with flashing that zip. How did you partition it in the first place?
You now have to reformat the ext. Best bet, gparted.
Click to expand...
Click to collapse
thanks you for your advice rootSU. i will try to format my sdcard to see if that works. Just in case if it doesnt, i just have to get a new sdcard then??
Just to confirm, even if i'm on Cool3D Runnymede v3 now and used ext4 alignment tool: i got stuck too 1st time, then from Recovery i formatted all parts, wiped dalvik and reinstalled.
I guess issue was the ext4 formatting, which i skipped 1st time.
I just tried to get runnymede running and also I am stuck at the white loading screen. Do i have to format my sd card now? or just try a reinstall?
Daley026,
assuming root + S-OFF, here is what i did:
1. loaded CM7r2 HBOOT (i used Android Flasher from Windows)
2. updated Clockworkmod Recovery 5.0.2.0 (again with AF)
3. from Recovery run the ext4 alignment tool zip
4. formatted all partitions
5. reinstalled RM v3
6. updated kernel to Gingersense dfs havc 0.8c.
Hope it'll work for ya too,
Schar

cm7 and cm7r2 hboot rom won't boot

Hi i am using my desire fir nearly 2 yrs and have flash many roms with all hboot. Now when i'm trying to flash a rom with either cm7 or cm7r2 hboot , the phone won't boot. I have fllow the instruction on this thread http://forum.xda-developers.com/showthread.php?t=1192984 but still the same. can anyone help me to sort it out.
Thanks in advance
What hboot you have now and what is the rom in question?
SwiftKeyed from my HTC Desire using XDA App.
I have the same problem..
I'm trying to use sebastian15's Runnymede 4.8 ROM.
Any ideas?
I flashed the CM7r2 hboot, wiped data, cache, dalvik, rebooted to recovery, flashed ROM, rebooted, now I'm stuck at HTC splash screen.
Yorba said:
I have the same problem..
I'm trying to use sebastian15's Runnymede 4.8 ROM.
Any ideas?
I flashed the CM7r2 hboot, wiped data, cache, dalvik, rebooted to recovery, flashed ROM, rebooted, now I'm stuck at HTC splash screen.
Click to expand...
Click to collapse
I guess you should partition your SD card: the most common is 1gb ext, rest is fat.
I already did that using gparted. 1gb ext4 and rest fat32
Set both partitions primary? Created first FAT and then EXT partition?
SwiftKeyed from dGB with Transparent XDA App
ya both are Set primary partitions . I have created the fat partition first and then ext 4.
rajesh1108 said:
ya both are Set primary partitions . I have created the fat partition first and then ext 4.
Click to expand...
Click to collapse
Same here guys,
CM7r2, 1GB EXT4, 7GBFAT32. Used Aurora 0.41, decided to change to insertacoin as aurora wasn't very stable and looked like partition wasn't working correctly. Pus, EXT4 partition is gone aswell
My sd card isnt readable on Recovery either (recognisable on pc though).
I've tried fastboot oem enable qxdm 0 - Still nothing. Card gives "unable to mount" message. Been at this for 8 hours now....
BUT, when i insert different sd card - seems fine...
vidrom said:
Same here guys,
CM7r2, 1GB EXT4, 7GBFAT32. Used Aurora 0.41, decided to change to insertacoin as aurora wasn't very stable and looked like partition wasn't working correctly. Pus, EXT4 partition is gone aswell
My sd card isnt readable on Recovery either (recognisable on pc though).
I've tried fastboot oem enable qxdm 0 - Still nothing. Card gives "unable to mount" message. Been at this for 8 hours now....
BUT, when i insert different sd card - seems fine...
Click to expand...
Click to collapse
OHHHHHH,
Finally looks like i'm all working.
I had to use my spare sd card to load Oxygen http://forum.xda-developers.com/showthread.php?t=971904
This enabled me to reformat my sd card (that was unrecognisable previously) on my phone - after rebooting the phone twice to recognise the card ( mounting and dismounting).
Card is now back to full capacity of 8GB. I've applied EXT4 1GB again, loaded Insertcoin and it's all GOOD!!!!
In terms of faulty EXT4 - performing fastboot oem enable qxdm 0 seemed to erase all the partitions and bring the card to factory state.
Hope some of you will find it useful.
Good luck to yall and MASSIVE thanks to those posting advice on this forum!!!
The case of vidrom is not the same as mine. see the first post it state clearly that i can't flash rom with cm7 or cm7r2 hboot. nothing to do with card can't recognise. I'm still searching for a solution.
Hey rajesh1108,
Have you tried flashing with Android Flasher ?
http://forum.xda-developers.com/showthread.php?t=794638
I found it to be the easiest way to getting around flashing.
I was once stuck with at boot load and basically redid everything from the beginning using a different guide. Try following this:
http://androidforums.com/desire-all...all-about-rooting-updated-21-july-2011-a.html
Sorry i cant be specific - i'm quite new to all this.
GOOD LUCK!
What rom are you trying to flash?
@vidrom:
Excuse me, but how should your post help the OP?
I solved my problem! Updated my recovery to a new version of Clockwork using ROM Manager.
i'm trying to flash runnymede 4.8.
Yorba which version of recovery are u using. how did u proceed. updated recovery and then flash hboot(cm7r2) and then flash your rom?
I would flash Hboot, recovery and then rom. Are you sure you wiped everything? Created an ext4 partition with at least 512 MB?
ya i have flash the same way you have mention and my ext 4 is 1gb

Categories

Resources