does anyone else's cwm jump 2 spaces at a time when tryin to select in item? its completely random and then sometimes when i press the menu button to select an item the recovery goes to sleep. pressing the menu brings it back up but since i cant use the menu button to select items i have to pull the battery
Strange and how do you get acces to the menu button in recovery mode. Or do you mean the power button.
321jurgen said:
Strange and how do you get acces to the menu button in recovery mode. Or do you mean the power button.
Click to expand...
Click to collapse
the power button selects your items. just randomly the power button wont act like the select item button it will act like a power button on another phone where it turns the recovery screen off and you just see the cwm logo sitting there, so i have to battery pull its weird. dont know if i had a bad flahs or what i havent seen anyone else have this problem
al52025 said:
does anyone else's cwm jump 2 spaces at a time when tryin to select in item? its completely random and then sometimes when i press the menu button to select an item the recovery goes to sleep. pressing the menu brings it back up but since i cant use the menu button to select items i have to pull the battery
Click to expand...
Click to collapse
when the power button puts the phone to sleep in CWR that means you accidentally disabled the Go Back option. You can cycle through the menu with the up button a few times and you will see a note about the Go Back option being enabled. Going the other way you will get a message about the Go Back option being disabled.
The overly sensitive buttons issue is being worked on. Someone is developing a CWR option that increases the font and greatly improves this situation. I'll try to find it and post back here. I don't think it's up to full speed yet though.
Good luck.
Could be a bad flash or the wrong cwm image. There's a toro and a magure. Make sure you have the right one. I sugest flash again.
Geezer Squid said:
when the power button puts the phone to sleep in CWR that means you accidentally disabled the Go Back option. You can cycle through the menu with the up button a few times and you will see a note about the Go Back option being enabled. Going the other way you will get a message about the Go Back option being disabled.
The overly sensitive buttons issue is being worked on. Someone is developing a CWR option that increases the font and greatly improves this situation. I'll try to find it and post back here. I don't think it's up to full speed yet though.
Good luck.
Click to expand...
Click to collapse
o really? i have seen that pop up once in awhile about the go back opition but didnt know wtf it meant. thanks
al52025 said:
o really? i have seen that pop up once in awhile about the go back opition but didnt know wtf it meant. thanks
Click to expand...
Click to collapse
First time it happened to me I almost had a stroke. I had just wiped everything(!!) and when I hit the power button and the screen went dark I really thought I had selected reboot without having a rom installed!! Sure was glad it turned out to be something simple.
Related
I have put my phone back to stock twice and tried to reflash clock work to see if I could get this issue fixed but nothing seems to get rid of this annoying skipping.
Sometimes if I am going through the clock work menu and I hit vol up or vol down it will move the cursor 2 or 3 positions. I have no idea why it does this...also if i tap up or down really fast i get a "disabled back button" at the bottom and then nothing works when I hit the power button to choose an option.
Anyone else getting this?
everyone gets it. Its just very sensitive to the volume up/down input...take your time and youll get it
EVO'D_OUT said:
everyone gets it. Its just very sensitive to the volume up/down input...take your time and youll get it
Click to expand...
Click to collapse
But why if you hit up or down to fast it disables the back button?
Weird thing happens when i reboot into recovery, when i try to navigate the menu with the volume rocker one press will up or down will translate to a few button pushes
also, the power button turns the screen off, but only after being in recovery for along time
anyone else experiance this?
edit, when the power button turns the screen off it says "back menu button disabled."
This is a known issue. If you keep scrolling through the menus the back button will become enabled and navigation should return to normal.
silow said:
This is a known issue. If you keep scrolling through the menus the back button will become enabled and navigation should return to normal.
Click to expand...
Click to collapse
thank you!
OK, so my little 9 year old brother got the Acer Iconia Tablet A100 so he wouldnt feel so left out that everyone else in the household has a tablet but not him, well he thought he would be smart and turn off the wifi and place a lock on it. Well he forgot the lock code and after many attempts he has to login with his google credentials, but the problem is that the wifi is off so it wont fix anything. So im trying to format it for him, I can get to the recovery screen, but only the volume buttons will work and the no other button will let me confirm the selection. Dose anyone know what i can do?
http://www.youtube.com/watch?v=QwyGSwmzVtM
1. Place the rotation lock switch in the up position
2. Press and hold the Volume down button, which is located farthest from the rotation lock
3. With the Volume down button held, press and hold the Power button for 3 seconds then release it. Continue holding the Volume down button.
4. Once the tablet vibrates, switch the rotation lock on and off repeatedly while still holding the Volume down button.
5 Release the Volume down button and stop switching the rotation lock once the "Erasing Userdata..." message appears in the upper left corner of the screen
6. Once the factory reset has been completed your tablet will load to the Welcome screen.
7 Your Factory Data Reset has completed now follow the onscreen steps to setup your tablet.
jobobishere said:
OK, so my little 9 year old brother got the Acer Iconia Tablet A100 so he wouldnt feel so left out that everyone else in the household has a tablet but not him, well he thought he would be smart and turn off the wifi and place a lock on it. Well he forgot the lock code and after many attempts he has to login with his google credentials, but the problem is that the wifi is off so it wont fix anything. So im trying to format it for him, I can get to the recovery screen, but only the volume buttons will work and the no other button will let me confirm the selection. Dose anyone know what i can do?
Click to expand...
Click to collapse
Hard reset the tablet, you'll lose everything, but it will revert to factory condition.
Power off the tablet
Hold Volume + (the one furthest from the power button/ lock switch, right if holding landscape)
While holding Volume + press and hold the Power button
Once it turns on, holding the Volume +, release Power and wiggle the lock switch up and down a few times.
Screen will then say its formatting or resetting or whatever it says.
After this completes, it may reboot, or power off, or continue booting into android, whatever it does, just let it go into android
It should greet you with the Welcome screen for setup.
Resume playing with it.
Edit: Ah I was gonna link a youtube video but Romman0 beat me to it! I must be getting slow in my old age.
Lol, I just happened to be on.
I was editing a bunch trying to get the [tube] code to work (to no avail) and added text instructions.
Romman0 said:
Lol, I just happened to be on.
I was editing a bunch trying to get the [tube] code to work (to no avail) and added text instructions.
Click to expand...
Click to collapse
Well at least I got the typed instructions in first! lol
I just happened across the post while I taking a break from trying to learn git, and working with the a200 device trees :crying:
pio_masaki said:
Hard reset the tablet, you'll lose everything, but it will revert to factory condition.
Power off the tablet
Hold Volume + (the one furthest from the power button/ lock switch, right if holding landscape)
While holding Volume + press and hold the Power button
Once it turns on, holding the Volume +, release Power and wiggle the lock switch up and down a few times.
Screen will then say its formatting or resetting or whatever it says.
After this completes, it may reboot, or power off, or continue booting into android, whatever it does, just let it go into android
It should greet you with the Welcome screen for setup.
Resume playing with it.
Edit: Ah I was gonna link a youtube video but Romman0 beat me to it! I must be getting slow in my old age.
Click to expand...
Click to collapse
Can I do a hard-reset once I have unlocked bootloader & installed a custom recovery? Is there a way to go back to stock recovery?
Chocu1a said:
Can I do a hard-reset once I have unlocked bootloader & installed a custom recovery? Is there a way to go back to stock recovery?
Click to expand...
Click to collapse
You can still hard reset yes but it only erases user data nothing else.
If you want to go back to stock use one of the update.zip methods in vaches stock rom thread. It'll go back to stock recovery. If you want just the stock recovery there's a stock recovery.IMG around somewhere I'll see if I can find it.
Tapatalked from my Galaxy S II.
So I've had the Optimus G since last night, and I noticed there was an AT&T update, but I postponed it. However, after postponing it three times, it launched the update automatically and forced me to update. The phone rebooted into the update screen, going through a firmware and software update before rebooting again. It got to the AT&T "Rethink possible" logo and stays there forever. No amount of hard resets help. I had root before the update, but I've read on here that others had root and updated just fine.... has this happened to anyone else? Do I have any other option besides going back to AT&T?
EDIT: How do I boot into recovery mode? I've read that for other LG phones you have to hold down both volume buttons while holding the power, but when I do that it just goes to the AT&T splash like usual.
Did you try holding the power button? I was able to get into download mode by pressing pwr/vol+/vol- simultaneously with usb plugged in, but I don't know if that will help your situation.
Yikes, sorry to hear that. I had no problems and kept root.
Sounds like a return if you can't get it going quickly. You shouldn't have to deal with that on a mandatory update.
Good luck!
A
From the manual, that I downloaded from the LG website (not sure that this helps, if you don't know what to delete):
5. Using Safe Mode and System Recovery Using Safe mode
To recover your phone when malfunctioning.
1 Turn off your phone and reboot. When you see the booting animation (Rethink Possible SM) press and hold the Volume Down Key . Your Home screen will then be displayed with the words "Safe mode" in lower left corner.
2 From the Home screen, tap the Menu Key and tap All settings > General tab > Applications.
3 Tap one of the available tabs at the top of the screen and select the application you wish to uninstall.
4 Tap Uninstall and OK to confirm.
5 After uninstalling the application, turn off and reboot your phone.
mbonus said:
Did you try holding the power button? I was able to get into download mode by pressing pwr/vol+/vol- simultaneously with usb plugged in, but I don't know if that will help your situation.
Click to expand...
Click to collapse
dbgeek said:
From the manual, that I downloaded from the LG website (not sure that this helps, if you don't know what to delete):
5. Using Safe Mode and System Recovery Using Safe mode
To recover your phone when malfunctioning.
1 Turn off your phone and reboot. When you see the booting animation (Rethink Possible SM) press and hold the Volume Down Key . Your Home screen will then be displayed with the words "Safe mode" in lower left corner.
2 From the Home screen, tap the Menu Key and tap All settings > General tab > Applications.
3 Tap one of the available tabs at the top of the screen and select the application you wish to uninstall.
4 Tap Uninstall and OK to confirm.
5 After uninstalling the application, turn off and reboot your phone.
Click to expand...
Click to collapse
Neither of these solutions did anything, but thanks anyways.
Bummer sorry to hear that. Is the att store far away? I really don't think this has anything to do with root.
mbonus said:
Bummer sorry to hear that. Is the att store far away? I really don't think this has anything to do with root.
Click to expand...
Click to collapse
No, it's only a few miles away, but as a college student with no car it makes things a little harder. I'm not sure what happened, I'm surprised they forced me to update...
Moved to Q & A section.
Sent from my Galaxy Nexus using Tapatalk 2
ShotSkydiver said:
So I've had the Optimus G since last night, and I noticed there was an AT&T update, but I postponed it. However, after postponing it three times, it launched the update automatically and forced me to update. The phone rebooted into the update screen, going through a firmware and software update before rebooting again. It got to the AT&T "Rethink possible" logo and stays there forever. No amount of hard resets help. I had root before the update, but I've read on here that others had root and updated just fine.... has this happened to anyone else? Do I have any other option besides going back to AT&T?
EDIT: How do I boot into recovery mode? I've read that for other LG phones you have to hold down both volume buttons while holding the power, but when I do that it just goes to the AT&T splash like usual.
Click to expand...
Click to collapse
Have the same exact problem,but my phone is bone stock,have to call At&t and wait for a warranty replacement.
Good luck.
tientsdo said:
Have the same exact problem,but my phone is bone stock,have to call At&t and wait for a warranty replacement.
Good luck.
Click to expand...
Click to collapse
have you tried a hard factory reset. turn phone off. hold down down power button and volume down key. follow onscreen instructions.
So I activated Universal Switch on S6 Edge to check it out, something went wrong in the settings (long story short, got a pop up while setting it up), now screen unresponsive.
It works, I just get this blue horizontal line scanning the screen and nothing else but the power button and home button works. Tried safe mode, no bueno. How can I disable US feature without resetting to factory or at least no data wipe (if possible!)?
Android 5.0, rooted with pingpong, no custom recovery, knox 0x0.
All help is appreciated.
Same
[The exact same thing just happened to me someone please help
Fixed!
The way I had fixed this is by holding down the power button, both up and down sound buttons, and the home button until it restarted. When the device turned back on it gave the option to turn the setting off. Hope it helped!
ImJustBoss99 said:
The way I had fixed this is by holding down the power button, both up and down sound buttons, and the home button until it restarted. When the device turned back on it gave the option to turn the setting off. Hope it helped!
Click to expand...
Click to collapse
it works , thanks so much buddy , i love you:good:
how to turn off universal switch
hit home button 3 times
Thanks alot
It worked buddy
It doesn't give me the option to turn it off
Hi,
I have been struggling with Universal Switch on a Samsung S5 Neo. I switched it on, but was never able to switch it off again.
These are findings so far:
-> Did a factory reset using "Sound Up", "Home" and "Power" button simultaneous.
-> The device comes back and wants to configure itself again.
-> I restored my settings from Google, but this immediately brought back "Universal Switch"
-> Factory Reset again and configured the device, but told Google that I want to use it as a "New Device".
-> Now I can use my device in a proper way.
-> In Google Play Store I find all my Apps which were linked to my account and reinstalled them and I am back in business again.
-> Took me half a day to sort this out.
The programmer who designed and programmed this should be hung and shot and poisoned, because this is absolute Crapware.
Hope this helps for all the others who are suffering.
You can also push the home button three times and it should turn it off.
thank u ur the best
Ok, so i have exactly the same problem except my home button doesn't work
Anyone one know how to sort this without having to take it in to a store?
I was faced with this problem before and looked everywhere and couldnt find a fix. This was a while ago. So I dont remember what I did to clear it. I was cleaning off the screen and touched the home button as I was wiping it off and the problem began again.... I just came across your comment because all the others failed. I pressed the home button 3 times quickly and the blue lines stopped scrolling. In addition, I went over the accessibility and I turned off the "Universal Switch" option as much as the option allows. I hate this function. I do not use it or need it (for my needs). I hope I can remember what to do next time this happens. I swore to myself I would remember last time, but apparently that wasnt a guarantee. This time, I will write it down and put is somewhere I know I will find it next time I see these nefarious blue lines scrolling. Hopefully I wont see it again since I disabled it more than it was to begin with. Thank you ever so for commenting. You saved me a lot of frustration!
great fix
CarlyCraig said:
hit home button 3 times
Click to expand...
Click to collapse
thank you for posting the only sollution that works.
Hello,
I have activated Universal Switch option Screen - Volume Increase button on S6 Edge upgraded version of android 6.0 and but it messup everything.. I am now unable to access any feature on screen.. none of the button are working on screen.
I have also tried rebooting it with the option suggested by you.. but I am locked due to password protected... My device not asked to disable Universal Switch option after reboot as well..
Please help, how to get this Function Disable, without affecting my data as I do not wish to loss any of my data..
So what the heck is that scanning blue line option supposed to do?
My home button is not working, now tell me how do i get out this situation
Akki167 said:
My home button is not working, now tell me how do i get out this situation
Click to expand...
Click to collapse
Have you tried pressing it rapidly three times?
It happens to me too, have you solved this problem? Please tell me what to do im freaking out right now
me too @Alifanasya
same issue
it works with OTG cable + mouse