Develop Bugs

[Recovery] CWM Rogue Touch Recovery v1.5.0 (Updated 5/6/12)

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
ClockworkMod 5.0.2.8 Based
-Rogue Touch Recovery v1.5.0- ​
Presented By-
TDR
Bazar6
Steady Hawkin​
General-
This recovery brings the following game changing features to the table:
Full Touch support
Overhauled UI
Backup/Restore and flash from USB Drive
Backup/Restore and flash from internal storage (/sdcard)
See Changelog for full list
Important Info-
By default your Xoom will your MicroSD card for nandroids and flashing. To use a USB drive or your internal storage, go to Mounts and Storage and select the location of your choice. *Please note, although you can use your internal storage for nandroids, it is not recommended.*
By default /data/media (/sdcard) will be skipped during wipe, backup, and restore.
This recovery does not support encrypted partitions, do not use this recovery if you use device encryption in ICS
Install Instructions-
-Make a nandroid in your current recovery then proceed
-Download zip file from link below
-Place zip on Micro SDcard
-Reboot into existing recovery
-Choose install zip and select the Rogue Recovery
-Confirm file, wait for it to finish flashing, then reboot
-Reboot back into recovery and bask in the Rogue glory!
Download-
Rogue Recovery v1.5.0 (RC3)
Source-
Can be found on Github- HERE
Thank You-
Koush
CyanogenMod Team
j-r0dd
Donate to Team Rogue HERE
Stay Tuned For Future Releases!!!​

-Partial Changelog-​
1.5.0 (RC3)
+Updated base to CWR 5.0.2.8
+Full touch support
**touch menu selections, use on screen buttons, or use volume rockers and power button
***swipe cursor movement (swipe left or right to go back)
+New CM style blue theme
+Large Roboto font
*Fixed text flow
+Changed menu style and layout
+Large backups (>2.1GB) should work now
*Note: 4GB FAT32 limit still applies
+Updated kernel, busybox
+UMS supported
+Fixed script assert toggle (thanks Sam Mortimer)
-Removed backup internal storage (buggy, storage limits)
-Removed partition storage (dangerous)
1.3.0
+Updated base to CWR 5.0.2.7
+Revised backup menu with option to switch to internal storage
*Fixed battery level display
*Using the wipe menu no longer dumps you back to the main menu automatically
1.2.0
+Based on ClockworkMod Recovery v5.0.2.3 + Rogue Kernel 1.3.1N
+New tar-based nandroid images
+Option to flash zips from internal storage directly in the Install menu
+Confirmation screen when storage free space might be too low
*Progress indication disabled by default again for speed (create /sdcard/clockworkmod/.hidenandroidprogress to enable progress)
**Old yaffs-based images still supported
1.1.1
*Fixed Advanced Backup
1.1.0
+Added option to mount USB drive on /sdcard without needing to remove the micro SD card (Mount menu > Mount USB drive on /sdcard)
+Ability to toggle between internal and regular storage (Mount menu)
+Warning before backing up to internal storage
+Disabled formatting, partitioning and USB mounting of internal storage
*Upstream patches
1.0.0
+Based on ClockworkMod Recovery v4.0.1.5 & Launchpad kernel 1.3.0
+New menus from j-r0dd's Nexus S recovery (fewer clicks!)
+Recovery will try to mount external USB drives (FAT format only) as long as Micro SDcard is removed
+Handle /data/media (thanks solarnz)
+Added a toggle to switch on or off backup/restore of /data/media (off by default)
+Will try to mount a USB drive if no micro SD card is present
+Battery level notification in confirmation screen

-Big Thanks To The People Who Donated-​
goldiefish
***If you make a donation, please post your name so we can thank you***​

awesome. will be trying this on my wife's xoom. i think this my first time posting first (after the OP of course)!!!

Wow!!!! Thanks a lot!!!
Sent from my MZ601 using xda premium

Nice one! Cheers Steady

flashed it. looks nice. getting the following error:
E:Can't mount /cache/recovery/command
is that alright?

Max_Pain said:
flashed it. looks nice. getting the following error:
E:Can't mount /cache/recovery/command
is that alright?
Click to expand...
Click to collapse
When are you getting that error?

First time I booted into recovery after flashing it. In the main page.
Sent from my HTC Evo 3D on the MetroPCS 1x network...

Max_Pain said:
First time I booted into recovery after flashing it. In the main page.
Sent from my HTC Evo 3D on the MetroPCS 1x network...
Click to expand...
Click to collapse
Make sure your micro sdcard is in your xoom and try rebooting into recovery.

Will have to try this thx Steady. See you in #xoom.

Steady Hawkin said:
Make sure your micro sdcard is in your xoom and try rebooting into recovery.
Click to expand...
Click to collapse
the card was already in the xoom. i rebooted into recovery again and this time i didnt get the message. maybe because it was the first time booting into it? seems to be fine now.

Looks sweet. Really dig the Team Rogue logo.

Max_Pain said:
the card was already in the xoom. i rebooted into recovery again and this time i didnt get the message. maybe because it was the first time booting into it? seems to be fine now.
Click to expand...
Click to collapse
Strange, let me know if it happens again.
gerald410 said:
Will have to try this thx Steady. See you in #xoom.
Click to expand...
Click to collapse
Lookin forward to it G!
musashiken said:
Looks sweet. Really dig the Team Rogue logo.
Click to expand...
Click to collapse
Thanks for your support

couple noob questions...can we get screen shots? Lol
Also does this recovery play nice for those not using launchpad kernel?
Can I rename my backup using this? When I manually change my backup names with my current recovery they end up having a md5 error and I can't use them anymore
Finally does this mean xoomers can use ROM manager without horrible consequences or is the sd card location still the main problem for us?

Awesome! Thanks to you guys for all of your hard work.

rockhumper said:
couple noob questions...can we get screen shots? Lol
Also does this recovery play nice for those not using launchpad kernel?
Can I rename my backup using this? When I manually change my backup names with my current recovery they end up having a md5 error and I can't use them anymore
Finally does this mean xoomers can use ROM manager without horrible consequences or is the sd card location still the main problem for us?
Click to expand...
Click to collapse
-I might try and post a screenshot later.
-It plays nice with LP or Tiamat
-I have not had any issues renaming backups in either recovery, are you using a program like Root Explorer to change it? Make sure your using correct punctuation.
-I personally do not use Rom Manager, but I have not heard of issues with either recovery using Rom Manager. Just make sure your on either this recovery, or Solarnz recovery.

Steady Hawkin said:
-I might try and post a screenshot later.
-It plays nice with LP or Tiamat
-I have not had any issues renaming backups in either recovery, are you using a program like Root Explorer to change it? Make sure your using correct punctuation.
-I personally do not use Rom Manager, but I have not heard of issues with either recovery using Rom Manager. Just make sure your on either this recovery, or Solarnz recovery.
Click to expand...
Click to collapse
Thanks steady. The ROM manager thing is when flashing updates...it actually makes back up a finebut they end up on the internal sd card...but anyways I will just just stock with the current recovery I think. the naming thing is being done through root explorer but I am not sure why changing the name makes the file inaccessible...oh well, not trying to side track your thread. Thanks for the great work

rockhumper said:
Thanks steady. The ROM manager thing is when flashing updates...it actually makes back up a finebut they end up on the internal sd card...but anyways I will just just stock with the current recovery I think. the naming thing is being done through root explorer but I am not sure why changing the name makes the file inaccessible...oh well, not trying to side track your thread. Thanks for the great work
Click to expand...
Click to collapse
No worries bro, I think I know what the issue is. Try and get in the habit of booting into recovery and using the backup option inside recovery to make your nandroids. After that, use root explorer to change the name. If you do that, you should be golden.

Steady Hawkin said:
No worries bro, I think I know what the issue is. Try and get in the habit of booting into recovery and using the backup option inside recovery to make your nandroids. After that, use root explorer to change the name. If you do that, you should be golden.
Click to expand...
Click to collapse
Yeah that is what I have been doing because in my current recovery when I make a back up it does not let me name the back up. It just assigns a date and time name to it. I don't typically use ROM manager with the Xoom at this point. The name change shows up when I boot back into recovery but then when I load it I get md5 sum error.
Maybe I will mess with it tonight some to find the problem.thanks guy!

[Recovery] 4EXT Recovery Classic v2.2.7 RC5 | Convert FS | Rom -> Backupname | ..

Thanks to cjward23 and friends for testing, 4EXT Recovery is now also available for the Desire Z / G2.
​
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Quick note about themes:
Available themes as of Aug/28:
Themes by pravus_nephilim
Themes by Apaquette420
Themes by Whiskey103
Themes by Amresh
Themes by Apaquette420
Themes by CWhitney24
Themes by DaMyth
Themes by Blindndumb
To uninstall any "flashed theme" and to revert to your own custom settings you had before flashing, just use this Theme Uninstaller in recovery.
It will clear any theme you might have flashed and revert to your own custom settings you had before flashing that theme!​​
THANKS:
All credits and my deepest respect go to Koush for his extremely great code!
Without him 4EXT Recovery wouldn't have been possible!
Biggest thanks possible go to Sebastiaan15 for his brilliant ideas and who spent whole weeks testing my buggy code with his Desire
Without you I could never have made it!!!
So BIG THANKS to SEBASTIAAN15 and KOUSH for his hard work with CWMR !!!
Many credits to the Desire S community ( especially to loveboatcaptain - LBC Mod Android Development and Marylandcookie ) for testing, very nice ideas, feature suggestions and helping to get the code running on the Desire S!
Special big thanks to RAVENNA from android-hilfe.de board for hours of testing for the Desire!
BIG Thanks to Hussainmushahid who helped me a lot spending much of time with solving a bug I could not reproduce on my device.
And many thanks to all users who reported and helped to identify problems ( can't any longer list all of you here since the list has grown too large )!
Even more thanks to people who 've bought me some beer YOU ROCK!! ZEEKIZ, A USER, PHILOS64, STEVEATHOME, PREACHER65, BEN_PYETT, ULTRA DROID, PTR_HAMILTON, BEANBEAN50, SEBASTIAAN15 and LOVEBOATCAPTAIN
​
v2.2.6 RC4 Released: Oct/01
Rare Superuser problem when tar backups were enabled (disabled by default) was fixed.
Converting partitions between ext3 and ext4 without data loss now correctly calculates the space needed to successfully complete the operation
New option: check and optionally repair the file system on your sdcard (fat32)
Removed duplicate format cache option inside the format menu (wipe cache does the same)
When formatting fat32 it will now save your 4ext.prop settings and restore them afterwards
Changed partitioning of the sdcard to not use LBA mode for new fat32 partitions as requested by Ghiki
Added new size option (128mb) to the partitioning menu per request
Parted is no longer used to format fat32 in the partition menu
-> This solves a bug where sometimes the creation of the fat32 file system failed and produces better quality results​
4EXT Recovery themes should now stay when formatting /system or flashing new roms
New option: format /sdcard fat32
New 4EXT Recovery Control API because I'm forced to drop "extendedcommand" (see App for the reason why)
enables file names and directories to include spaces for installations​
calculates needed space to complete a full or advanced backup at the beginning of the backup.​
This ensures that you are not left with a non working backup.​
Size for recovery greatly reduced
New 4EXT Recovery Control Features
Please see www.4ext.net for more.
Fix permissions
Calculate real values for the space needed to create a new full or advanced backup
Advanced Backups: While you are selecting / deselecting partitions, it will display and update the currently needed space to complete that custom backup set.​
As an example, the following would be possible to do in just one session:
Restore a backup, set to create a backup / advanced backup before the restore,
format all partitions with a file system of your choice before the restore process starts,
flash additional zip files afterwards, fix permissions and select to stay inside recovery or to reboot automatically once all actions are complete.​
Features: Use 4EXT Recovery Control or Recovery Updater for complete Changelogs and Known issues!
not all features may be relevant for all devices
Displays additional information:
Identifies your current rom and displays its name
Current filesystems on your partitions
Free space remaining of all of your volumes
Current battery charge level
Backup | Restore:
Correctly calculates free space needed to complete a backup ( version > 2.2.6 RC4 )
Tar backups (can be switched on or off)
Complete CWMR5 compatibility
All Backups you create will be named after your currently installed Rom for easier identification.
Never unwillingly get "downgraded" to EXT3 again
Always restores backups using the file systems you HAD on your partitions at the time of creation!
-> all partitions formatted with ext4 at that time, will be restored to ext4. The same is true for ext3.​
You can manually change any existing Backup to ext4 or ext3
-> so that after a restore, all partitions and up with the file system you wanted!​
Advanced Backup: backup only a single partition
Convert any of your partitions to EXT4 or EXT3 without data loss.
Formatting:
When you wipe or format it will always use the same file system you currently have.
-> but you can change that​
When you format ext4 it will always create an aligned file system
Correctly identifies unformatted sd-ext partitions
-> if it finds one it displays a warning and suggests you may format them by visiting the 4EXT menu​
Filesystem check and repair option in advanced menu
Partitioning:
Alignment check of your partitions
Full support for up to 2 sd-ext partitions + swap (Backup/restore/format/convert, fsck, et.c.)
(RE-) Partition your sdcard for sd-ext without removing your fat32 partition.
All partitions created with 4EXTRecovery will be perfectly aligned to 4k
Installing:
Integrated md5sum checking option
Themes:
Customize all colours used throughout recovery
Use your own icons, background images, progress bars.. more to come.
Assign different backgrounds to different menu categories (version >= 2.1.2)
Create a flashable zip for others to flash your theme.
Menus:
Most popular menu items rearranged
Format menu
Power Menu + option to reboot into bootloader
Less "No's" in confirmation dialogues
Changed Advanced Restore: first select what you want to restore, then select the backup
-> Useful for restoring from "Advanced Backups"​
4ext.prop:
Configuration file on your sdcard where you can set options to be used by 4EXTRecovery
Change all settings conveniently with 4EXT Recovery Control
Many more options to come
Share your settings / themes by packing your config into a flashable theme
Other stuff:
USB Storage Autostart (must be switched on)
Mount usb storage exposes all partitions on your sdcard to the os (not just fat32)
-> you could even partition your sdcard from your PC while connected via USB​
Switch haptic feedback on/off
You don't need to reboot recovery if you transferred a file to show up in the install menu.
-> This bug affected only some users with either CWMR or previous versions of 4EXT.​
Button backlights (Desire S, Desire HD and Incredible S only)
​
Download:
All downloads are now available through 4EXT Recovery Updater. It's free, no ads, no tracking, no nothing, don't worry
.. and of course via 4EXT Recovery Control
This ensures that your downloads are ok by automatically verifying md5sums and that known issues and changelogs are easily accessible
It also notifies you when there are any new critical bugs found
Recovery images will be uploaded for download soon too, but they can also be acquired easily by using Updater or Control.
You can for example just download a recovery.zip containing the image. The download will be automatically verified for correct md5sums!
4EXT Recovery Control
Free version: Recovery Updater
Fully featured version: 4EXT Recovery Control
For a list of its many features, visit www.4ext.net
Some examples :
Flash as many zip files you want in one go
Automatically calculate and display the md5sums of all zip files you are going to flash
Check your backups' health to ensure they will restore later when you need them, by verifying their md5sums!
Optionally, but highly not recommended:
If md5sums don't match but you REALLY NEED that backup BADLY, you might want to restore it anyway.
You can you this app to fix the md5sums of a given backup to "forcefully" restore it!​
Calculate real values for the space needed to create a new full or advanced backup
Advanced Backups: While you are selecting / deselecting partitions, it will display and update the currently needed space to complete that custom backup set.​
Identifies and adds your romname so you don't need to type so much when chosing a meaningful name for your backup
As an example, the following is possible to do in just one session:
Restore a backup, set to create a backup / advanced backup before the restore,
format all partitions with a file system of your choice before the restore process starts,
flash additional zip files afterwards, fix permissions and select to stay inside recovery or to reboot automatically once all actions are complete.​
Much, much more! See www.4ext.net
Recovery theming
Uninstall and Install themes with live preview and the option to change their colours without the need to reboot into recovery.
Change all colours with live preview and a nice colour picker.
​

great have been waiting for this release

L-ViZ said:
great have been waiting for this release
Click to expand...
Click to collapse
Hehe thanks.
BTW: version 2.1.6 RC2 should be rock solid, just like a "final".
Except *maybe* for the optional tar backups feature (which can be switched on optionally).
It was tested very much, but as it is so new, noone knows if there are any "hidden" bugs with it that could possibly appear in the future

awesome, will give it a whirl!

So is this better than CWM 5?
Sent from my Desire Z running @ 2GHZ

being that cwm5 randomly freezes your phone, i don't see how it could be any worse. so far seems to have more features than 3.0.2.4 and i like the tar backup option, much quicker.

xT4Z1N4TRx said:
So is this better than CWM 5?
Sent from my Desire Z running @ 2GHZ
Click to expand...
Click to collapse
I wouldn't say better, it's different.
It has a lot more features and really detects your file systems correctly and preserves them on backup/restore.
CWMR5 is the first version that does that too, but at least in my case it failed.. when I restore a backup with it, all my partitions are formatted ext3 again (when they were ext4 as I created the backup)
But hey, I'm biased
Try it yourself and see what you like better
If you want, take a look what ppl say in the other 4ext threads:
http://forum.xda-developers.com/showthread.php?p=15504830
http://forum.xda-developers.com/showthread.php?p=15349806
http://forum.xda-developers.com/showthread.php?t=1104765
http://forum.xda-developers.com/showthread.php?t=1130004

well im sold, i defenetly have to this recovery, it has the feature iv been wating for, to disable md5 checksum
edit: dude i can i just say thank you, omfg this recovery is to much, battery info, parttion size info and rom name all in recovery? this is just amazing. i literately have no words man

siulmagic said:
well im sold, i defenetly have to this recovery, it has the feature iv been wating for, to disable md5 checksum
Click to expand...
Click to collapse
Hi thanks
But it doesn't have that feature to disable md5checksums.
However you can use Recovery Control to verify any of your backups for correct md5sums. If they don't match, you can als use it to "correct" them.
This is not recommended of course, since it indicates that there's a problem with that backup's data integrity. However sometimes ppl need exactly that backup badly.. so they can *try* to restore it anyway.
Disabling md5sum checks completely is a really bad idea.
I got one request about that from a guy with a phone that had a defect in handling sdcard memory. He tried numerous sdcards but still had that problem for a month.. any md5sumchecks fail for him.
He asked me to include a switch to disable them for him.
In the meanwhile he has sent his phone in for repair.
I might do that and add that switch, but it's not a very high priority since there is really much todo.

madmaxx82 said:
Hi thanks
But it doesn't have that feature to disable md5checksums.
However you can use Recovery Control to verify any of your backups for correct md5sums. If they don't match, you can als use it to "correct" them.
This is not recommended of course, since it indicates that there's a problem with that backup's data integrity. However sometimes ppl need exactly that backup badly.. so they can *try* to restore it anyway.
Disabling md5sum checks completely is a really bad idea.
I got one request about that from a guy with a phone that had a defect in handling sdcard memory. He tried numerous sdcards but still had that problem for a month.. any md5sumchecks fail for him.
He asked me to include a switch to disable them for him.
In the meanwhile he has sent his phone in for repair.
I might do that and add that switch, but it's not a very high priority since there is really much todo.
Click to expand...
Click to collapse
aw really, i was sure i read it on the description, regardless its still awesome

siulmagic said:
aw really, i was sure i read it on the description, regardless its still awesome
Click to expand...
Click to collapse
Thanks
May I ask why you want that feature?
If there is demand for that I will add it (although I'm really against that.).

THIS IS BRILLIANT
Sent from my Desire Z running @ 2GHZ

xT4Z1N4TRx said:
THIS IS BRILLIANT
Sent from my Desire Z running @ 2GHZ
Click to expand...
Click to collapse
Wow
Thank you very much

madmaxx82 said:
Thanks
May I ask why you want that feature?
If there is demand for that I will add it (although I'm really against that.).
Click to expand...
Click to collapse
well back in the day, when i had a motoroal cliq, we had amonra recovery, and so nanddroid on that recovery dint have md5checksums, and so we could rename our nanddroid backs and they would still flash, but i could be wrong, maybe it did have md5checksum im not sure, regardless i could flash any nadndroid, even if it dint have the same name it was made with. again this is the best recovery, we been waiting long enough, thank you

Haha, thought you guys would like this.
Sent from my HTC Desire S using Tapatalk

siulmagic said:
well back in the day, when i had a motoroal cliq, we had amonra recovery, and so nanddroid on that recovery dint have md5checksums, and so we could rename our nanddroid backs and they would still flash, but i could be wrong, maybe it did have md5checksum im not sure, regardless i could flash any nadndroid, even if it dint have the same name it was made with. again this is the best recovery, we been waiting long enough, thank you
Click to expand...
Click to collapse
Thanks again!
BTW: You can rename any of your backups and it will work

madmaxx82 said:
Thanks again!
BTW: You can rename any of your backups and it will work
Click to expand...
Click to collapse
ah awesome man, even better, i like this recovery more and more every minute.

cjward23 said:
Haha, thought you guys would like this.
Sent from my HTC Desire S using Tapatalk
Click to expand...
Click to collapse
haha thanks for pushing me and for the testing

Firstly i want to thank you for this recovery, i have converted all my filesystem to ext4 but i have no idea what it does or can it improve speed of my device...

This is a pretty nice recovery! Thanks!

[Recovery] 4EXT 2.2.7 RC5 | STAY @EXT4 | Convert FS | MD5sum check | Rom > Backupname

[Recovery] 4EXT 2.2.7 RC5 | STAY @EXT4 | Convert FS | MD5sum check | Rom > Backupname
Thanks to Jarheadflip for testing, 4EXT Recovery is now also available for the myTouch 4G
​
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Quick note about themes:
Available themes as of Oct/17:
Themes by GuestK00388
Themes by Apaquette420
Themes by Whiskey103
Themes by Amresh
Themes by Apaquette420
Themes by CWhitney24
Themes by DaMyth
Themes by Blindndumb
To uninstall any "flashed theme" and to revert to your own custom settings you had before flashing, just use this Theme Uninstaller in recovery.
It will clear any theme you might have flashed and revert to your own custom settings you had before flashing that theme!​​
THANKS:
All credits and my deepest respect go to Koush for his extremely great code!
Without him 4EXT Recovery wouldn't have been possible!
Biggest thanks possible go to Sebastiaan15 for his brilliant ideas and who spent whole weeks testing my buggy code with his Desire
Without you I could never have made it!!!
So BIG THANKS to SEBASTIAAN15 and KOUSH for his hard work with CWMR !!!
Many credits to the Desire S community ( especially to loveboatcaptain - LBC Mod Android Development and Marylandcookie ) for testing, very nice ideas, feature suggestions and helping to get the code running on the Desire S!
Special big thanks to RAVENNA from android-hilfe.de board for hours of testing for the Desire!
BIG Thanks to Hussainmushahid who helped me a lot spending much of time with solving a bug I could not reproduce on my device.
And many thanks to all users who reported and helped to identify problems ( can't any longer list all of you here since the list has grown too large )!
Even more thanks to people who 've bought me some beer YOU ROCK!! ZEEKIZ, A USER, PHILOS64, STEVEATHOME, PREACHER65, BEN_PYETT, ULTRA DROID, PTR_HAMILTON, BEANBEAN50, SEBASTIAAN15 and LOVEBOATCAPTAIN
​
v2.2.6 RC4 Released: Oct/01
Rare Superuser problem when tar backups were enabled (disabled by default) was fixed.
Converting partitions between ext3 and ext4 without data loss now correctly calculates the space needed to successfully complete the operation
New option: check and optionally repair the file system on your sdcard (fat32)
Removed duplicate format cache option inside the format menu (wipe cache does the same)
When formatting fat32 it will now save your 4ext.prop settings and restore them afterwards
Changed partitioning of the sdcard to not use LBA mode for new fat32 partitions as requested by Ghiki
Added new size option (128mb) to the partitioning menu per request
Parted is no longer used to format fat32 in the partition menu
-> This solves a bug where sometimes the creation of the fat32 file system failed and produces better quality results​
4EXT Recovery themes should now stay when formatting /system or flashing new roms
New option: format /sdcard fat32
New 4EXT Recovery Control API because I'm forced to drop "extendedcommand" (see App for the reason why)
enables file names and directories to include spaces for installations​
calculates needed space to complete a full or advanced backup at the beginning of the backup.​
This ensures that you are not left with a non working backup.​
Size for recovery greatly reduced
New 4EXT Recovery Control Features
Please see www.4ext.net for more.
Fix permissions
Calculate real values for the space needed to create a new full or advanced backup
Advanced Backups: While you are selecting / deselecting partitions, it will display and update the currently needed space to complete that custom backup set.​
As an example, the following would be possible to do in just one session:
Restore a backup, set to create a backup / advanced backup before the restore,
format all partitions with a file system of your choice before the restore process starts,
flash additional zip files afterwards, fix permissions and select to stay inside recovery or to reboot automatically once all actions are complete.​
Features: Use 4EXT Recovery Control or Recovery Updater for complete Changelogs and Known issues!
not all features may be relevant for all devices
Displays additional information:
Identifies your current rom and displays its name
Current filesystems on your partitions
Free space remaining of all of your volumes
Current battery charge level
Backup | Restore:
Correctly calculates free space needed to complete a backup ( version > 2.2.6 RC4 )
Tar backups (can be switched on or off)
Complete CWMR5 compatibility
All Backups you create will be named after your currently installed Rom for easier identification.
Never unwillingly get "downgraded" to EXT3 again
Always restores backups using the file systems you HAD on your partitions at the time of creation!
-> all partitions formatted with ext4 at that time, will be restored to ext4. The same is true for ext3.​
You can manually change any existing Backup to ext4 or ext3
-> so that after a restore, all partitions and up with the file system you wanted!​
Advanced Backup: backup only a single partition
Convert any of your partitions to EXT4 or EXT3 without data loss.
Formatting:
When you wipe or format it will always use the same file system you currently have.
-> but you can change that​
When you format ext4 it will always create an aligned file system
Correctly identifies unformatted sd-ext partitions
-> if it finds one it displays a warning and suggests you may format them by visiting the 4EXT menu​
Filesystem check and repair option in advanced menu
Partitioning:
Alignment check of your partitions
Full support for up to 2 sd-ext partitions + swap (Backup/restore/format/convert, fsck, et.c.)
(RE-) Partition your sdcard for sd-ext without removing your fat32 partition.
All partitions created with 4EXTRecovery will be perfectly aligned to 4k
Installing:
Integrated md5sum checking option
Themes:
Customize all colours used throughout recovery
Use your own icons, background images, progress bars.. more to come.
Assign different backgrounds to different menu categories (version >= 2.1.2)
Create a flashable zip for others to flash your theme.
Menus:
Most popular menu items rearranged
Format menu
Power Menu + option to reboot into bootloader
Less "No's" in confirmation dialogues
Changed Advanced Restore: first select what you want to restore, then select the backup
-> Useful for restoring from "Advanced Backups"​
4ext.prop:
Configuration file on your sdcard where you can set options to be used by 4EXTRecovery
Change all settings conveniently with 4EXT Recovery Control
Many more options to come
Share your settings / themes by packing your config into a flashable theme
Other stuff:
USB Storage Autostart (must be switched on)
Mount usb storage exposes all partitions on your sdcard to the os (not just fat32)
-> you could even partition your sdcard from your PC while connected via USB​
Switch haptic feedback on/off
You don't need to reboot recovery if you transferred a file to show up in the install menu.
-> This bug affected only some users with either CWMR or previous versions of 4EXT.​
Button backlights (Desire S, Desire HD and Incredible S only)
​
Download:
All downloads are now available through 4EXT Recovery Updater. It's free, no ads, no tracking, no nothing, don't worry
.. and of course via 4EXT Recovery Control
This ensures that your downloads are ok by automatically verifying md5sums and that known issues and changelogs are easily accessible
It also notifies you when there are any new critical bugs found
Recovery images will be uploaded for download soon too, but they can also be acquired easily by using Updater or Control.
You can for example just download a recovery.zip containing the image. The download will be automatically verified for correct md5sums!
4EXT Recovery Control
Free version: Recovery Updater
Fully featured version: 4EXT Recovery Control
For a list of its many features, visit www.4ext.net
Some examples :
Flash as many zip files you want in one go
Automatically Calculate and display the md5sums of all zip files you are going to flash
Check your backups' health to ensure they will restore later when you need them, by verifying their md5sums!
Optionally, but highly not recommended:
If md5sums don't match but you REALLY NEED that backup BADLY, you might want to restore it anyway.
You can you this app to fix the md5sums of a given backup to "forcefully" restore it!​
Calculate real values for the space needed to create a new full or advanced backup
Advanced Backups: While you are selecting / deselecting partitions, it will display and update the currently needed space to complete that custom backup set.​
Identifies and adds your romname so you don't need to type so much when chosing a meaningful name for your backup
As an example, the following is possible to do in just one session:
Restore a backup, set to create a backup / advanced backup before the restore,
format all partitions with a file system of your choice before the restore process starts,
flash additional zip files afterwards, fix permissions and select to stay inside recovery or to reboot automatically once all actions are complete.​
Much, much more! See www.4ext.net
Recovery theming
Uninstall and Install themes with live preview and the option to change their colours without the need to reboot into recovery.
Change all colours with live preview and a nice colour picker.
​

Works well, thanks for getting this going on the MT4G.

mikeyinid said:
Works well, thanks for getting this going on the MT4G.
Click to expand...
Click to collapse
Thanks for the feedback

Oh wow nice. Thanks! Finally happy to see an alternative to CWM.
Sent from my HTC Glacier using xda premium

Great to see this recovery make it to the glacier, huge props to madmaxx for porting it to everyone's devices and giving them an awesome recovery!
Sent from my LG-P999 using xda premium

Thank you all for the great feedback
d12unk13astard said:
Great to see this recovery make it to the glacier, huge props to madmaxx for porting it to everyone's devices and giving them an awesome recovery!
Sent from my LG-P999 using xda premium
Click to expand...
Click to collapse
Hehe thanks, but 4EXT is very small.. only a handful of devices, and it won't grow big.
I will however try to support your device in the future

maddmaxx, im pretty sure i understand, but just to be sure. so i converted data to ext4, as it was only partition at ext3. if i flash a different rom it will stay ext4 correct? and can someone a little more familiar tell me if most if not all current release roms for mt4g will support ext4? tia

mikeyinid said:
maddmaxx, im pretty sure i understand, but just to be sure. so i converted data to ext4, as it was only partition at ext3. if i flash a different rom it will stay ext4 correct? and can someone a little more familiar tell me if most if not all current release roms for mt4g will support ext4? tia
Click to expand...
Click to collapse
4ext will always preserve your file systems unless you tell it to convert or format in a different one.
But it has no control over updater-scripts of roms you flash.
So when you flash a rom that formats system ext3, it will be done. And 4ext will preserve ext3 on /system from now on.. unless you convert or format ext4 et.c.
For data it should stay, because there shouldn't be a lot of roms that format your data partition that would be crazy

madmaxx82 said:
Thank you all for the great feedback
Hehe thanks, but 4EXT is very small.. only a handful of devices, and it won't grow big.
I will however try to support your device in the future
Click to expand...
Click to collapse
I'm just really glad to see it ported for the mt4g cuz even tho I don't own 1 anymore you still came thru and ported it as promised. If I find a bargain mt4g on craigslist I'm gonna go for it and definetly install this recovery. Does it have a terminal emulator included in options somewhere? I always liked partitioning my sdcard thru gparted in amon_RA recovery.
Sent from my LG-P999 using xda premium

d12unk13astard said:
I'm just really glad to see it ported for the mt4g cuz even tho I don't own 1 anymore you still came thru and ported it as promised. If I find a bargain mt4g on craigslist I'm gonna go for it and definetly install this recovery. Does it have a terminal emulator included in options somewhere? I always liked partitioning my sdcard thru gparted in amon_RA recovery.
Sent from my LG-P999 using xda premium
Click to expand...
Click to collapse
No, it doesn't have a terminal emulator, but it will correctly align all partitions you set up with it! Guaranteed! That's one of its features. There's also an alignment check.

works perfect even flashed one of the themes and it worked flawlessly 2thumbs up!!!!!!!!!!!!
---------- Post added at 10:18 PM ---------- Previous post was at 10:10 PM ----------
lil question when i open the app on the top it says v 2.0.2 but i flashed the 2.2.1....or is that normal cuz when i go into recovery it shows me at 2.2.1

Ascarface23 said:
works perfect even flashed one of the themes and it worked flawlessly 2thumbs up!!!!!!!!!!!!
---------- Post added at 10:18 PM ---------- Previous post was at 10:10 PM ----------
lil question when i open the app on the top it says v 2.0.2 but i flashed the 2.2.1....or is that normal cuz when i go into recovery it shows me at 2.2.1
Click to expand...
Click to collapse
Thnx
That's the App's version.
When you go inside the Update / Install menu where you can select different recovery versions to flash you will see your current version highlighted in yellowish orange and your version number of recovery in the title.
Everywhere else it's the current apk version
BTW: I would really recommend you to use the latest. 2.2.6 rc4.
There are too many advantages like checking for needed space to complete a conversion et.c.

madmaxx82 said:
Thnx
That's the App's version.
When you go inside the Update / Install menu where you can select different recovery versions to flash you will see your current version highlighted in yellowish orange and your version number of recovery in the title.
Everywhere else it's the current apk version
BTW: I would really recommend you to use the latest. 2.2.6 rc4.
There are too many advantages like checking for needed space to complete a conversion et.c.
Click to expand...
Click to collapse
yes i just noticed that thx for the fast reply and im updating to the 2.2.6 rc4 as we speak ...
ps- this **** is awesome!!!!!!!!!! flashing with out rebooting FTW.....

Is the recovery updater supposed to be in the market? I can only find the paid version.
I am able to direct download from the 4ext.net page and transfer to the sd card.

Nice to see this made it over here! good recovery! nice work!

Ascarface23 said:
yes i just noticed that thx for the fast reply and im updating to the 2.2.6 rc4 as we speak ...
ps- this **** is awesome!!!!!!!!!! flashing with out rebooting FTW.....
Click to expand...
Click to collapse
thanks
wolfepakt said:
Is the recovery updater supposed to be in the market? I can only find the paid version.
I am able to direct download from the 4ext.net page and transfer to the sd card.
Click to expand...
Click to collapse
No it's only available on the website.. but when there is an update it will notify you and download and trigger the install automatically if you allow it to.
Edit: I mean an update for the Updater app.. so you stay up to date even though it's not on the market.

thederekjay said:
Nice to see this made it over here! good recovery! nice work!
Click to expand...
Click to collapse
Thank ya

Sent from my HTC Glacier using XDA Premium App

Ascarface23 said:
Sent from my HTC Glacier using XDA Premium App
Click to expand...
Click to collapse
hehe nice
I love her
My favourite theme.
Did you change the colours by editing 4ext.prop or by using the app?
Edit: stupid me.. that picture is from inside the app, right?
That's why you can't read the text that good.. inside recovery the background image is a tiny bit less "obtrusive"

madmaxx82 said:
hehe nice
I love her
My favourite theme.
Did you change the colours by editing 4ext.prop or by using the app?
Click to expand...
Click to collapse
i used the app to do everything

Problem HTC Wildfire S - Rom EQDKP 3.5 V5.2

Hi All,
I have installed this rom but on every reboot I have this problem:
Everything was working, but on every reboot I got the message :
"System UIDs Inconsistent. UIDs on the system are inconsistent, you need to wipe your data partition or your device will be unstable."
I push the only one option that i can:
I feel lucky
and the seems to be that all is ok but I'm still not sure...what can I do and how can I solve this problem?
Thanks and bye, Elisa.

Elisa81 said:
Hi All,
I have installed this rom but on every reboot I have this problem:
Everything was working, but on every reboot I got the message :
"System UIDs Inconsistent. UIDs on the system are inconsistent, you need to wipe your data partition or your device will be unstable."
I push the only one option that i can:
I feel lucky
and the seems to be that all is ok but I'm still not sure...what can I do and how can I solve this problem?
Thanks and bye, Elisa.
Click to expand...
Click to collapse
I hope you've performed a clean install of ROM ie, in CWM recovery - wipe data, wipe cache, wipe dalvik-cache, wipe battery stats, and then install the ROM and perform again all of the wipe as mentioned.

Uhmmm...I don't understand....sorry!
Can u explain excatly what I need to do?
Sorry but I'm really a disaster with smartphone!
Thanks and bye, Elisa.

Elisa81 said:
Uhmmm...I don't understand....sorry!
Can u explain excatly what I need to do?
Sorry but I'm really a disaster with smartphone!
Thanks and bye, Elisa.
Click to expand...
Click to collapse
I hope you've exactly followed the installation instructions mentioned in the ROM thread step by step -> [ROM] [2.3.5] EQDKP-Sense3.5 V 5.2
Not following any of the steps should break a clean install I'm afraid, so errors may happen. Anyways as I don't own this device, it may not be wise for me to give suggestions anymore. Soon a Moderator will move this thread into Wildfire S Q&A section, so members using this phone should help you out. Thanks and regards.

I think that i had made all the instruction but, for being sure, I will remake all the procedure now!
Thank u!

I remade akk the operation mentioned...and I'm sure to have done all but now I still have some problems...
Sometimes I receive this type of message:
the application apri sense plugin manager (process htc.opensense) has stopped unexpectedly
The application google play store (process com.android.vending) has stopped unexpecte
and so on...
What can I so?
Thanks and bye, Elisa.

Elisa81 said:
I remade akk the operation mentioned...and I'm sure to have done all but now I still have some problems...
Sometimes I receive this type of message:
the application apri sense plugin manager (process htc.opensense) has stopped unexpectedly
The application google play store (process com.android.vending) has stopped unexpecte
and so on...
What can I so?
Thanks and bye, Elisa.
Click to expand...
Click to collapse
lots of reasons i think you should use this one.
http://forum.xda-developers.com/showthread.php?t=2346687
it's latest sense 3.5 rom and instructions are crystal clear.wipe everything and install rom.
if you are going to use int2ext scripts flash them right after rom..go to advanced and wipe sd-ext and then reboot.
then these all won't be an issues i guess.good luck

Hi,
I can't understand this:
if you are going to use int2ext scripts flash them right after rom..go to advanced and wipe sd-ext and then reboot.
sorry but i'm really a disaster! Can u explain?
I think that I will make this passage:
1. wipe data/factory reset
2. In advanced Wipe Dalvik Cache
3. In advanced Wipe Battery Stats
4. Install zip from sdcard file Marvellous Sense 3.5 18-7-13
5. Reboot
something wrong or more? I need to format the sd card before doing this operation?
Thanks and bye, Elisa.

Elisa81 said:
Hi,
I can't understand this:
if you are going to use int2ext scripts flash them right after rom..go to advanced and wipe sd-ext and then reboot.
sorry but i'm really a disaster! Can u explain?
I think that I will make this passage:
1. wipe data/factory reset
2. In advanced Wipe Dalvik Cache
3. In advanced Wipe Battery Stats
4. Install zip from sdcard file Marvellous Sense 3.5 18-7-13
5. Reboot
something wrong or more? I need to format the sd card before doing this operation?
Thanks and bye, Elisa.
Click to expand...
Click to collapse
nah it's okay..
you have to also wipe cache..not only factory reset.
what problem you are facing now?
ps if you havent wipe cache then it's reason of your problems

Opssssssssssss.....I never made a wipe cache!
And now I still have the problem of the first post....and more I can't use facebook.....see this post: http://forum.xda-developers.com/showthread.php?p=43832660#post43832660
If I made now a wipe cache I need to reinstall all the rom? Do u think that with wipe cache I can resolve the facebook problem?
Thanks and bye, Elisa.

you either didn't wipe the dalvik cache... or u did restored system apps from titanium back up/other back up... that's why u r facing the problem...
you have to go to recovery first... if u have the rom installed long press power button and select the boot into recovery option... or press power + volume down together to enter to hboot menu and select recovery from there...
the other things are easy.... there is no reason to face this type of problems... make sure u didn't do the things i mentioned in bold font in this comment and followed the installation instructions properly...
also I'd suggest use the odexed version of the rom and use data2sd link is given in the post. Int2sd or link2sd etc. won't work with this. If u don't flash data2sd after installation the room will keep showing errors.. For data2sd u need to create 3 PRIMARY PARTITIONS in your memory card. in the post the instructions are given. All u have to do is read the instructions and understand it to use properly.

Hi,
Thanks for the reply but I'm really sure to have wipe the dalvik cache! And I'm really sure that I have not restored the application from any backup!
The only one thing that I haven't do is the new partition on the SD Card because they are already created from the previus version of your Rom....can be this the problem? I need to make from zero the partition?
I made this passage copied from your wonderful guide:
1. Reboot in recovery
2. Then wipe data/factory reset
3. Then advanced then Wipe Dalvik Cache & Wipe Battery Stats
4. Go back then install zip from sdcard
5. Choose EQDKPV5.1(*-*-2012).zip & flash
6.After that Reboot & Wait 3-10 minutes until ROM is fully booted. Then take the battery out.
7.After that Reboot into recovery again to install data2sd in this case no need of wipe/format etc. just install Data2SDInstallerES.zip & reboot.
I already flash the file data2sd but I don't this application on phone.....
What do u suggest to do? Can i try with a wipe cache?
Please note that I tried 4 times to install the new rom in last 4 days!
Thank u so much! Elisa.

Elisa81 said:
Opssssssssssss.....I never made a wipe cache!
And now I still have the problem of the first post....and more I can't use facebook.....see this post: http://forum.xda-developers.com/showthread.php?p=43832660#post43832660
If I made now a wipe cache I need to reinstall all the rom? Do u think that with wipe cache I can resolve the facebook problem?
Thanks and bye, Elisa.
Click to expand...
Click to collapse
In Sense 3.5, the app Facebook is integrated in Friend Stream. So if you already created an account, you just have to open this app, and it will show your Facebook content. If you use several social networks, you can choose which one you want to see by clicking on the bar at the top of the app ; a dropdown list will appear with 'Facebook', 'Twitter', etc.

I tried tu use Friend stream and I can put my login on facebook....I click ok but then this error happen:
The application Apri sense Plugin manager (process com.htc.opensense) has stopped unexpectedly. Please try again
I try again but this error appera every time and I can't open facebook
Please help me!
Thanks and bye, Elisa.

Elisa81 said:
I tried tu use Friend stream and I can put my login on facebook....I click ok but then this error happen:
The application Apri sense Plugin manager (process com.htc.opensense) has stopped unexpectedly. Please try again
I try again but this error appera every time and I can't open facebook
Please help me!
Thanks and bye, Elisa.
Click to expand...
Click to collapse
That's strange. Reboot in recovery, wipe data, system, sd-ext, cache and dalvik cache. Reboot again in recovery. Install Marvellous Sense 3.5 and tell me the options you chose. Then reboot and it should be ok...
Envoyé depuis mon HTC FeuSauvage S avec CM10.1

Yes....that's really strange but I'm so unlucky!
I will try to reinstall the ROM...but I think that I will use the EQDKP ones because I read that on the Marvellous there's some problem....what do u think about this?
And more: I haven't made the format on the SD Card because the partition are already created from the previous install....can be this the problem? I need to make from zero the partition?
Really thank!
Elisa

Elisa81 said:
Yes....that's really strange but I'm so unlucky!
I will try to reinstall the ROM...but I think that I will use the EQDKP ones because I read that on the Marvellous there's some problem....what do u think about this?
And more: I haven't made the format on the SD Card because the partition are already created from the previous install....can be this the problem? I need to make from zero the partition?
Really thank!
Elisa
Click to expand...
Click to collapse
EQDKP is very stable and it has the best benchmark of all the ROMs for the WildFire S, but I do not like its design But if you do, it is better than Marvellous Sense I think.
When did you buy your phone ? Maybe it is 2012 model.
You can also try to use this recovery instead of ClockWorkMod. Put your phone in bootloader mode, then flash it with fastboot : fastboot flash recovery openrecovery-twrp-2.2.2.0-marvel.img.
One thing that you can do is to wipe nothing but to use this script (flash it, reboot recovery and flash the rom).

Thank!
I download the 2 files (SuperWipeMarvelcEdition.zip and openrecovery-twrp-2.2.2.0-marvel.img.md5)....but now...which one do u suggest to use? Can u explain the passage for using it?
Sorry but, as u understand, I'm really a disaster!
Many, many thanks!
PS: Yes, the phone is from 2012!

Elisa81 said:
Thank!
I download the 2 files (SuperWipeMarvelcEdition.zip and openrecovery-twrp-2.2.2.0-marvel.img.md5)....but now...which one do u suggest to use? Can u explain the passage for using it?
Sorry but, as u understand, I'm really a disaster!
Many, many thanks!
PS: Yes, the phone is from 2012!
Click to expand...
Click to collapse
First, reboot in recovery.
Second, flash SuperWipeblablabla
Third, reboot recovery
Fourth, flash EQDKP 5.2
Fifth, reboot your phone and wait
Sixth, use this tutorial to tell me if your WFS is 2012 model.

Elisa81 said:
Hi,
Thanks for the reply but I'm really sure to have wipe the dalvik cache! And I'm really sure that I have not restored the application from any backup!
The only one thing that I haven't do is the new partition on the SD Card because they are already created from the previus version of your Rom....can be this the problem? I need to make from zero the partition?
I made this passage copied from your wonderful guide:
1. Reboot in recovery
2. Then wipe data/factory reset
3. Then advanced then Wipe Dalvik Cache & Wipe Battery Stats
4. Go back then install zip from sdcard
5. Choose EQDKPV5.1(*-*-2012).zip & flash
6.After that Reboot & Wait 3-10 minutes until ROM is fully booted. Then take the battery out.
7.After that Reboot into recovery again to install data2sd in this case no need of wipe/format etc. just install Data2SDInstallerES.zip & reboot.
I already flash the file data2sd but I don't this application on phone.....
What do u suggest to do? Can i try with a wipe cache?
Please note that I tried 4 times to install the new rom in last 4 days!
Thank u so much! Elisa.
Click to expand...
Click to collapse
izi501 said:
EQDKP is very stable and it has the best benchmark of all the ROMs for the WildFire S, but I do not like its design But if you do, it is better than Marvellous Sense I think.
When did you buy your phone ? Maybe it is 2012 model.
You can also try to use this recovery instead of ClockWorkMod. Put your phone in bootloader mode, then flash it with fastboot : fastboot flash recovery openrecovery-twrp-2.2.2.0-marvel.img.
One thing that you can do is to wipe nothing but to use this script (flash it, reboot recovery and flash the rom).
Click to expand...
Click to collapse
I dont understand u'r problem actually... If u hadn't recovered system apps.. But the error message you are reporting is the one of conflicting system apps...
That can not happen in my rom or any other rom... The thing izi501 telling try it... But I don't think your recovery has a problem...
Clearly while flash a rom UID will be changed... But I dont understand why your device's UID isn't changing!!! The old UID staying intact thats why u r seeing that error... Is it problem with this rom only??? Have you tried any other rom???
Also about facebook... I have not faced any problem while uploading the rom... I'll test it tonight again though... (Its an app ported from HTC Sensation which has Sense version 3.0 as HTC explorer {the device from which eqdkp is ported} didnt have an working FB app)
Anyways... Take your device to a local phone store/htc customer care and try to S-off the device... (May be you did something wrong with the unlocking...)
You could also try different recoveries, make sure that they are for ur device if ur model is gsm, try only the recoveries for gsm devices... There is a chance of bricking while u flash wrong recovery/radio etc... Be careful about it... Have patience... Read everything in a post before trying to use any mod... There may be important things that U are missing...
About partitioning: http://www.partitionwizard.com/free-partition-manager.html
Download the free home edition... And make three partitions serially... No1: Rest No2: about 1000mb EXT4 No3: about 418mb Linux swap Make sure all partitions are primary...........Its important...
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Cyanogen mod 7 gb internal memory help

Ive installed this rom coming from mildwild rom with cm7r2 hboot and ive installed apps and it is full and i had to install s2e but still dont work so is got to do something with the script?
Sent from my HTC Desire using xda app-developers app

Which version of CM7 did you install, did it come with a A2SD script already?
Install 'DiskUsage' if you haven't already (recommended this to you when you started rooting months ago). Have a look at your /data partition which should be 287MB large with cm7r2 hboot, and see what is filling it up.
As with any internal memory issues, understand how it is being used first before attempting to solve it...

Oh ive solved it, i had to tick the applications and applications data in s2e, i downloaded it from their website.
Sent from my HTC Desire using xda app-developers app

lilsafbig said:
Oh ive solved it, i had to tick the applications and applications data in s2e, i downloaded it from their website.
Sent from my HTC Desire using xda app-developers app
Click to expand...
Click to collapse
Lol well yeh...you do actually have to configure it to tell it what to move...
It's best to move only applications and dalvik cache to sd-ext though
Application data is best left your /data partition, generally more stable, not to mention should be faster

eddiehk6 said:
Lol well yeh...you do actually have to configure it to tell it what to move...
It's best to move only applications and dalvik cache to sd-ext though
Application data is best left your /data partition, generally more stable, not to mention should be faster
Click to expand...
Click to collapse
yh it wont let me untick the application data and i ticked the dalvik cache though like you told me to, i rebooted and all my apps have disappeared and cant find the superuser there aswell. look at the pic
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Strange, I've never used s2e but the principle is the same as any other really.
Normally the procedure is;
- flash rom
- setup a2sd
- restore apps
That way the apps etc get restored to where you want them first time, rather than moving them later.
Try first going to recovery, wiping dalvik cache then rebooting, hopefully it will restore to the sd-ext like you want.
If that doesn't work then assume your already have a titanium backup of all your apps?
- nandroid backup
- full wipe and flash rom again
- setup s2e, move apps and dalvik, reboot
- restore apps
- check with diskusage to confirm everything is moved to where you want it

eddiehk6 said:
Strange, I've never used s2e but the principle is the same as any other really.
Normally the procedure is;
- flash rom
- setup a2sd
- restore apps
That way the apps etc get restored to where you want them first time, rather than moving them later.
Try first going to recovery, wiping dalvik cache then rebooting, hopefully it will restore to the sd-ext like you want.
If that doesn't work then assume your already have a titanium backup of all your apps?
- nandroid backup
- full wipe and flash rom again
- setup s2e, move apps and dalvik, reboot
- restore apps
- check with diskusage to confirm everything is moved to where you want it
Click to expand...
Click to collapse
i did this: went into the filemanager and installed s2e and needed root permissions so i did the same and installed it, then went in and ticked in s2e mount as ext4 and restarted and some apps are recovered, so now i have to tick application and dalvik like you said, i wanted to use a2sd script but i dont know where to get it from, im using cyanogenmod-7.2.0.1-bravo.
edit: i ticked em still the same only some apps are recovered.

Now try part 2...
eddiehk6 said:
If that doesn't work then assume your already have a titanium backup of all your apps?
- nandroid backup
- full wipe and flash rom again
- setup s2e, move apps and dalvik, reboot
- restore apps
- check with diskusage to confirm everything is moved to where you want it
Click to expand...
Click to collapse

eddiehk6 said:
Now try part 2...
Click to expand...
Click to collapse
ok dont have Titanuim backup but oh well so ill flash again and is there a way of installing a2sd script instead,edit google verification failed, connected to wifi wont let me download apps sooo i cba im gna have to go back to mildwild

lilsafbig said:
ok dont have Titanuim backup but oh well so ill flash again and is there a way of installing a2sd script instead,edit google verification failed, connected to wifi wont let me download apps sooo i cba im gna have to go back to mildwild
Click to expand...
Click to collapse
Not sure what you have tried, did you try to full wipe and flash ROM again?....(it's easier if you type in full sentences and use punctuation sometimes )
- You don't have to use Titanium Backup, just assumed you want to transfer your apps between ROMs? Do you not want to save your apps and data / preferences when switching? There are various apps which will do this, but Titanium is one of the most tried and trusted methods.
- Is the google verification a Play Store error? Normally a clear of the play store app data / cache resets it.
- You can use any compatible A2SD script. It's just better to set up A2SD before you install / restore any apps. Alternatives are int2ext, mount2sd, or darktremor A2SD. But they do roughly the same thing. In simple terms, only use one method at a time, you want to move apps and dalvik to sd-ext. I'm pretty sure S2E would have worked fine if you did as instructed...never mind.

Yh I flashed again and then had google error verification, I thought i'd go back to mildwild 5 cos its better for me, the titanium backup I didn't have a backup of apps so that's why... thanks anyway
Sent from my HTC Desire using xda app-developers app