Develop Bugs

Best Skins Ever in stock at introductory prices!

Best Skins Ever finally has the Galaxy Nexus skins in stock ready to ship out Monday! They are also all discounted right now as an introductory price. I picked up 2 for myself, I've used these for my Nexus One, Nexus S, GS2, and now my Galaxy Nexus will have it's turn! Definitely the best wet type skin on the market. Shipping only a dollar too, better than everywhere else except Amazon...
http://www.bestskinsever.com/google-samsung-galaxy-nexus-skin

Nice find. 2 ordered
Sent from my Galaxy Nexus using Tapatalk

weeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee!

I was thinking about getting the screen protector from them. can anyone comment on the quality of it? Is it very noticeable? bubbles? glare?

You will see orange peel. I just bought 2 back covers.
Sent from my Nexus S using XDA App

is that a bad thing? are there any that don't give this orange peel? sorry for being so noobish but I never used one on my Nexus One

rock7632 said:
is that a bad thing? are there any that don't give this orange peel? sorry for being so noobish but I never used one on my Nexus One
Click to expand...
Click to collapse
Well for starters, it ruins the crystal clear beautiful display.
I use it on the sides and back for a grippy feel.
SGP on the screen.

I have the same setup, I use SGP for the screen and Best Skins Ever for the body. But to compare all the wet install type shields, they will all have the orange peel effect but from my experience, Best Skins Ever is minimal and it isn't nearly as grippy feeling as the Zagg. In other words, your screen is still nice and smooth and not grippy if you use the Best Skins Ever screen protector.
Here are some pictures of the BSE on the Nexus S from a while ago: http://forum.xda-developers.com/showpost.php?p=10398198&postcount=6

Do BSE skins for the SGN come with separate pieces for the battery case and device frame? Hard to tell from the Nexus S pictures. I used to use them on iPhones, but of course battery replacement was not an option with those...

I've used BSE on many products, good stuff and cheap! Also excellent customer service.

Balthazar B said:
Do BSE skins for the SGN come with separate pieces for the battery case and device frame? Hard to tell from the Nexus S pictures. I used to use them on iPhones, but of course battery replacement was not an option with those...
Click to expand...
Click to collapse
They always have come with the pieces separate for me, at least when I got it for my Nexus One, Nexus S, and Galaxy S2... so I'm assuming it's the same thing for the Galaxy Nexus. If it doesn't then I will be very surprised.

So is screen protector edge to edge all the way around? And how is the battery cover handled since it is textured?
Sent from my Galaxy Nexus using xda premium

@rbiter said:
So is screen protector edge to edge all the way around? And how is the battery cover handled since it is textured?
Sent from my Galaxy Nexus using xda premium
Click to expand...
Click to collapse
From past experience, the screen cover is pretty much edge to edge everywhere. The textured back was kind of weird with the skin (I had a Galaxy S2 before this with the same textured back). At first when you put it on, you will notice gaps between the cover and the textured back, like it wasn't really on all the way. I left it alone and after about 2 weeks or so, it's like it dried out even more or shrunk to the textured backing and it looked good from then on out.

FYI people.....
25% off today through 14th on orders through them.
unfortunately i ordered yesterday and i asked if they can adjust my order.....
take advantage guys!!!

konman795 said:
Best Skins Ever is minimal and it isn't nearly as grippy feeling as the Zagg. In other words, your screen is still nice and smooth and not grippy if you use the Best Skins Ever screen protector.
Click to expand...
Click to collapse
I hate hate hate how grippy zaggs are. I use sgp crystal clear on my dinc right now. Will I be able to tell the difference in grip between that and these you think? I just really love hard covers since my finger can slide across with no friction...
Sent from my Droid Incredible

Just bought one of these, apparently it's free shipping to UK as well? Hopefully they don't pull me up on that!

What exactly is this?
I'm having a hard time visualizing what this is. The images they have are of the phone and not the individual protectors. Anyone have pictures or anything to support the product? I've typically bought the the PET silicone stiff protector for the screen. Very nice stuff. But this product also has a body protector??
So again, if anyone has photo's I'd appreciate the wisdom.

JoniKickAHoleInTheSky said:
I'm having a hard time visualizing what this is. The images they have are of the phone and not the individual protectors. Anyone have pictures or anything to support the product? I've typically bought the the PET silicone stiff protector for the screen. Very nice stuff. But this product also has a body protector??
So again, if anyone has photo's I'd appreciate the wisdom.
Click to expand...
Click to collapse
konman795 said:
http://forum.xda-developers.com/showpost.php?p=10398198&postcount=6
Click to expand...
Click to collapse
I used these pictures as a reference.

Reynaldo28 said:
I used these pictures as a reference.
Click to expand...
Click to collapse
i've talked to BSE and they said other than the battery cover being on piece, there are multiple pieces to the body parts.
skins ALWAYS look good on glossy phones.
they look good on textured phone too, but man glossy looks nice.
i have BSE for my NS and its awesome. i noticed that they are think to begin with.
some skins are thicker.

I have a question, if I do not like the look of the protector, will it be easy to remove and leave no damage?

Video Review: Rearth Ringke Slim for Galaxy Nexus

Hey guys,
Got my hands on the Rearth Ringke Slim, this is Rearth's revamp of the original Ringke series of cases, which were made of TPU. The Slims are thin, plastic shells that wrap around your device. Rearth touts this as being the slimmest plastic case, and I can definitely see why! The matte finish looks and feels great, but over time tends to pick up some dirt and grime.
Check out the full review below;

Great video review, I want one now! Thanks for that!

You're welcome! Glad to help

fantastic looking case, may well pick it up...another fine video

Thanks Buddy Hope you enter my giveaway video coming up later this week!

will this case work with the gsm extended battery?

neotekz said:
will this case work with the gsm extended battery?
Click to expand...
Click to collapse
Yes, I demonstrated that in the video.

thanks, i actually only watch the first half just before you put on the extended battery lol. funny that you mention scratch protection of the case after you showed that it scratched the phone. ive read that this case can also scratch a phone with the normal battery. thats too bad since this is the only thin case ive seen that has a lip over the corners.

neotekz said:
thanks, i actually only watch the first half just before you put on the extended battery lol. funny that you mention scratch protection of the case after you showed that it scratched the phone. ive read that this case can also scratch a phone with the normal battery. thats too bad since this is the only thin case ive seen that has a lip over the corners.
Click to expand...
Click to collapse
Yeah, if you're gonna use it with the stock battery, you'll be fine. The scratches are cause of the added pressure by the thickness of the extended battery.

Just got mine and I love it. Very sleek and sexy. No scratching the phone or anything.
Sent from my Galaxy Nexus using Tapatalk

I just ordered the Grey one. Cant wait for it.

Does this case fit the stock Verizon LTE version ?
Sent from my Galaxy Nexus using xda premium

Zorachus said:
Does this case fit the stock Verizon LTE version ?
Click to expand...
Click to collapse
I'd like to know this too!
Sent from my Galaxy Nexus using xda premium

Zorachus said:
Does this case fit the stock Verizon LTE version ?
Sent from my Galaxy Nexus using xda premium
Click to expand...
Click to collapse
if u go to their website, they show pics of da case on the LTE nexus = looks good to me

TPU Bumper

Anyone bought the following TPU Bumper for the Galaxy Nexus?
http://www.ebay.com/itm/TPU-BUMPER-...t=LH_DefaultDomain_0&var=&hash=item905d2ca610
How is the fit for the GSM version of the GNex?
Will the TPU bumper lift the camera lens away from the surface like how I suppose the front lip (which I hope is minimal) can lift the screen away from the surface when the phone is placed downwards?
How is the gloss like? Any other similar products with matte?
Are the buttons cut-out?
Does it add a lot, width wise?
Is the tpu rubbery? in the sense that it is sometimes hard to pocket?
Wow... lots of questions lol.

Crap, I just found a thread that has the same link. Thread title: "Best Case for Extended Battery $5 (Picture)"
Sorry if I accidentally double posted, my mind filtered out any threads where extended batteries are referred to since I have the standard batt.

Looks good, I am also looking for one.
but not shipping to sg

I ordered one of these. Should be here one day next month. I hate waiting, but that's what it is when shipping from overseas.

textus said:
Anyone bought the following TPU Bumper for the Galaxy Nexus?
http://www.ebay.com/itm/TPU-BUMPER-...t=LH_DefaultDomain_0&var=&hash=item905d2ca610
How is the fit for the GSM version of the GNex?
Will the TPU bumper lift the camera lens away from the surface like how I suppose the front lip (which I hope is minimal) can lift the screen away from the surface when the phone is placed downwards?
How is the gloss like? Any other similar products with matte?
Are the buttons cut-out?
Does it add a lot, width wise?
Is the tpu rubbery? in the sense that it is sometimes hard to pocket?
Wow... lots of questions lol.
Click to expand...
Click to collapse
Mine was delivered on Friday. Very nice... fits perfectly and doesn't add much extra to the phone. It easily slips into your pocket fine even with the rubber which is only very slight. The buttons are covered with the rubber giving it a nice feel while protecting them. I got the black one and the phone feels very good in the hand with it on. Looks very stylish and still retains the GNex look while protecting it.
Hope this info helps. Only issue was it took 3 weeks to get to me..... only got the postal service to blame for that though LOL

I ordered 2 last weekend. My GNEX had been the first phone that I've gone naked with for this long and I'm loving it, but get freaked out of the thought of dropping it with no protection. Hopefully this is a good compromise.
Sent from my Galaxy Nexus using xda premium

dp92180 said:
I ordered 2 last weekend. My GNEX had been the first phone that I've gone naked with for this long and I'm loving it, but get freaked out of the thought of dropping it with no protection. Hopefully this is a good compromise.
Sent from my Galaxy Nexus using xda premium
Click to expand...
Click to collapse
Definitely worth the wait. It's very stylish, keeps the GNex looking the way it was intended yet protecting it.

Yo guys check these out!!!!!!!
http://www.ebay.com/itm/TPU-BUMPER-...ccessories&hash=item256ee57164#ht_1818wt_1396
http://www.ebay.com/itm/TPU-BUMPER-...ccessories&hash=item256ee572fe#ht_1818wt_1396

NICE!!!! thanks for sharing the link
Just bought one white one black for my LTE GN
2-3 weeks delivery tho =/

MFD00M said:
NICE!!!! thanks for sharing the link
Just bought one white one black for my LTE GN
2-3 weeks delivery tho =/
Click to expand...
Click to collapse
All the links are for the 9250 GNex. Which one should I order for the LTE version?

ChappellHeel said:
All the links are for the 9250 GNex. Which one should I order for the LTE version?
Click to expand...
Click to collapse
I think because of the way these work, they should fit both versions. I can't say for certain since mine hasn't come in yet. Damn slow boat shipping.
Sent from my Galaxy Nexus using xda premium

Your welcome haha!
I am buying the Black one with the White front trim, and I think I want to try the Orange and white. Looks nice. Cheap too.

I just ordered this one:
http://www.ebay.com/itm/TPU-BUMPER-...ccessories&hash=item256ee572fe#ht_1818wt_1396
Hope it will come soon

ChappellHeel said:
All the links are for the 9250 GNex. Which one should I order for the LTE version?
Click to expand...
Click to collapse
I ordered my case from the op's link for my verizon nexus.
Case came in yesterday and overall its a damn good fit and feel for just $4.
Bought a white one but will probably order a black one as well.
I'll post up pics in a bit.

Got the case from the OP yesterday..*FINALLY*!!
I'm using the CDMA version with the extended battery and the fit is fantastic.
I hate having a case on this phone because it just looks and feels so great in hand naked.
This case feels great AND it's minimal enough that it maintains that sexy nexxy look and feel. Seriously, it looks great in person. Couldn't be happier!
http://dl.dropbox.com/u/12581431/Phone Stuff/IMG_20120401_101655.jpg
http://dl.dropbox.com/u/12581431/Phone Stuff/IMG_20120401_101717.jpg
http://dl.dropbox.com/u/12581431/Phone Stuff/IMG_20120401_101800.jpg
http://dl.dropbox.com/u/12581431/Phone Stuff/IMG_20120401_101813.jpg

lallymonster said:
Got the case from the OP yesterday..*FINALLY*!!
I'm using the CDMA version with the extended battery and the fit is fantastic.
I hate having a case on this phone because it just looks and feels so great in hand naked.
This case feels great AND it's minimal enough that it maintains that sexy nexxy look and feel. Seriously, it looks great in person. Couldn't be happier!
http://dl.dropbox.com/u/12581431/Phone Stuff/IMG_20120401_101655.jpg
http://dl.dropbox.com/u/12581431/Phone Stuff/IMG_20120401_101717.jpg
http://dl.dropbox.com/u/12581431/Phone Stuff/IMG_20120401_101800.jpg
http://dl.dropbox.com/u/12581431/Phone Stuff/IMG_20120401_101813.jpg
Click to expand...
Click to collapse
that looks really nice. congratulations on your tpu bumper

Good Stuff man I cant wait to get mine, Probably going to be a couple weeks though. So I'll update with pictures. I ended up getting the White and Orange. Try something a little different. I have 3 sgp cases and there all white and black. That kind of vibe.
Looks real nice though man.

[email protected] said:
Yo guys check these out!!!!!!!
http://www.ebay.com/itm/TPU-BUMPER-...ccessories&hash=item256ee57164#ht_1818wt_1396
http://www.ebay.com/itm/TPU-BUMPER-...ccessories&hash=item256ee572fe#ht_1818wt_1396
Click to expand...
Click to collapse
Ordered the b&w, will review it when I get it. Thanks a lot for the tip!

I finally received my TPU bumper last week. It's definitely for the GSM version, though I don't mind it on my VZW phone. I like it a lot. But yesterday, the black TPU portion separated away from the white plastic section at the USB port area so I can't use it anymore. Could just be a fluke in my case though. I contacted the original seller to see what they can do.

I doesn't notice it in HK!
Sent from my Galaxy Nexus using XDA

Do not buy the ballistic maxx case!!!

Ok so i just bought the ballistic maxx case from the at&t store for $50. I walk out to my car to put it on and quickly find out the case is a piece of $h!t. I dont know where to start but ill try. 1st its nothin lime the ballistic HC case i owned for other phones and absolutely loved. All it is is a ballstic sg case with this redicilous removable screen protector. Itd a hard plastic piece that you put on the phone after you slide the rubber gel on the phone. The plastic is hard to put on. I can see eventually scratching the phone trying to do this snd when you do get it on its lose as hell. It sits off the phone so far theres a gap in between it and the screen. When you press it it clicks against phone. The lip on the case is so big you have to curl your thumb to hit home screen. And ballistic has the balls to charge $50 for that piece of crap. This is one of the worst cases i have ever seen. I immediately took it back and got my refund. If you need a rugged case wait for the defender. That case is junk. If you dropped it in water the water would poor right through the cheap screen protector. Also theres no protection for camera. I took a few pics before returning.
Sent from my SPH-L710 using xda app-developers app

I was hoping to try the ballistic series too....dang
Sent fromTyra's galaxy siii C:

browniegirl said:
I was hoping to try the ballistic series too....dang
Sent fromTyra's galaxy siii C:
Click to expand...
Click to collapse
I checked it out at a AT&T as well and I have to agree...I thought it was garbage.

I dont understand what it is there trying to do. There HC cases were very good cases. Fit both my evos very good. Ballistics only downfall to me was customer service and they were normally late to the game. This case is just an embarassment to ballisctic. Very cheap not well cut and just dosent go well with the phone
Sent from my SPH-L710 using xda app-developers app

I hate bulky cases on slim phones anyway.

I got the case and I don't see why you guys are giving it such a bad rap. I bought it for when I go over to the desert for the extra protection and it should work just fine. I actually liked the look and feel better than other otterbox cases. Personal preference I guess.

I have the normal Ballistic SG coming from amazon tuesday or wednesday so I'm hoping it winds up being a nice case. if not ill probably check out the trident ageis or casemate tough

Thats too bad, it looks pretty cool

The main thing is that whole removable screen protector. That wws just a dumb idea
Sent from my SPH-L710 using xda app-developers app

Not really what I was wanting for $50, guess I'll get the otterbox.

Heres a video i found
http://www.youtube.com/watch?v=tKm14N17aSk&feature=youtube_gdata_player
Sent from my SPH-L710 using xda app-developers app

I had the same issue! It would bubble up after installing the screen protector. The case is JUNK. That is a fact.

No disrespect meant at all....but I completely disagree with the OP. I have this case and have grown to really like it. OP mentioned the screen protector having a gap between it and screen....it does not if installed correctly. Instructions clearly state to place screen protecter on phone BEFORE applying gel case. There is a lip around the screen prot/gel case that locks it into place (which also greatly aids in keeping water out....not saying go drop it in the washer and walk away but you get what I mean). then the polycarb shell fits perfectly....it's all a tight fit and imo looks good. i added pics of mine installed in another thread(can't remember where at the moment). Anyway, I wrote this reply to let people know it's not a bad case....actually had an otterbox defender on my previous phone and it became stretched out and ugly as hell. this case won't do that bc of the outter poly carb shell and how the gel shell is locked on the screen protector. Just saying don't dismiss this case on one or two bad reviews. It's a great case if installed correctly. I even ordered the Ballistic SG in a different color combo to switch things up since i already have the screen protector and holster. I would NOT have ordered a second if it was crap!!
EDIT: http://forum.xda-developers.com/showthread.php?t=1732976&page=6 Here's the link to the thread w/ pics of the BSGMaxx

werked said:
No disrespect meant at all....but I completely disagree with the OP. I have this case and have grown to really like it. OP mentioned the screen protector having a gap between it and screen....it does not if installed correctly. Instructions clearly state to place screen protecter on phone BEFORE applying gel case. There is a lip around the screen prot/gel case that locks it into place (which also greatly aids in keeping water out....not saying go drop it in the washer and walk away but you get what I mean). then the polycarb shell fits perfectly....it's all a tight fit and imo looks good. i added pics of mine installed in another thread(can't remember where at the moment). Anyway, I wrote this reply to let people know it's not a bad case....actually had an otterbox defender on my previous phone and it became stretched out and ugly as hell. this case won't do that bc of the outter poly carb shell and how the gel shell is locked on the screen protector. Just saying don't dismiss this case on one or two bad reviews. It's a great case if installed correctly. I even ordered the Ballistic SG in a different color combo to switch things up since i already have the screen protector and holster. I would NOT have ordered a second if it was crap!!
EDIT: http://forum.xda-developers.com/showthread.php?t=1732976&page=6 Here's the link to the thread w/ pics of the BSGMaxx
Click to expand...
Click to collapse
You also said in that thread that your not using the screen protector. I would imagine its bc of the lack of clarity or something else? Why pay $50 for a rugged case if you dont have the built in screen protector? They need to bring back the HC series. And when the defender is released youll see how making a 3 layer rugged case look smooth and fluid isnt that hard
Sent from my SPH-L710 using xda app-developers app

bmoreboy02 said:
You also said in that thread that your not using the screen protector. I would imagine its bc of the lack of clarity or something else? Why pay $50 for a rugged case if you dont have the built in screen protector? They need to bring back the HC series. And when the defender is released youll see how making a 3 layer rugged case look smooth and fluid isnt that hard
Sent from my SPH-L710 using xda app-developers app
Click to expand...
Click to collapse
You are correct. When I posted that I wasn't using the sp. I liked it then. Now I have it on and like other just the same. Its still very responsive and clear. NO gap between screen and sp at all. I have used an ob defender....smooth and fluid are not words I would use to describe it. I liked it bc I could bounce it off of cement with no ill effects but it was hello ugly imo. To r each his own I guess. Just wanted everyone to see how the sgmaxx preformed when installed correctly.
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2

werked said:
You are correct. When I posted that I wasn't using the sp. I liked it then. Now I have it on and like other just the same. Its still very responsive and clear. NO gap between screen and sp at all. I have used an ob defender....smooth and fluid are not words I would use to describe it. I liked it bc I could bounce it off of cement with no ill effects but it was hello ugly imo. To r each his own I guess. Just wanted everyone to see how the sgmaxx preformed when installed correctly.
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2
Click to expand...
Click to collapse
In your pictures it dose look like a nice fit. I tryd puttin the screen protector on before putting silicone on and after and it just was hidious. Also watchin the video review on youtube people really didnt have anything good to say. I just like the HC case and tje Defender because it gives you the feeling the phone is sealed tight and well protected. Ballstic sg maxx to me isnt really any different then a seidio rugged combo case. Layer after layer but no real screen protection
Sent from my SPH-L710 using xda app-developers app

Bought a clone from ebay. $5. Hasn't arrived yet. I still think the Kraken will be the one to beat.

I have a commuter now and i really like this case. I normally hlget defenders but must admit after a while between the dirt that gets under the screen protector and stuff it gets annoying. I have the visor screen protector now and really like the slim case.
Sent from my SPH-L710 using xda app-developers app

The case isn't horrible but it is (at least for me) difficult to hit the buttons at the bottom of the screen. The removable protector is not a "bad" idea but if they had a better fitting screen protector I think it would be better for us users. Having the option to replace it is nice but you don't have the option to have the screen face out while in the holster. I saw that seidio has the surface case so I might return this case and buy that. I really wish they would make a waterproof otterbox case which might happen because FINALLY Samsung has a device that is the same shape for all the carriers!
Usually with the Otterbox cases I pop out the built in protector and put one on the screen directly. I had an iPhone 4 that got chips in the glass because of little particles getting in between the glass and the built in screen protector.

bmoreboy02 said:
You also said in that thread that your not using the screen protector. I would imagine its bc of the lack of clarity or something else? Why pay $50 for a rugged case if you dont have the built in screen protector? They need to bring back the HC series. And when the defender is released youll see how making a 3 layer rugged case look smooth and fluid isnt that hard
Sent from my SPH-L710 using xda app-developers app
Click to expand...
Click to collapse
I have the same case and I like it. It was not too difficult to put on for me. As for the screen protector, I also have it off and like that it is not like the Otterbox. Why do that on a $50 case? Its the same reason I rip the display cover off the Otterbox Defender series. Because I don't like them. If I ever start scratching my display maybe I will install the removable display cover since it can go on and off. But I get these cases not for the screen protector but for those rare times I drop my device. And for that I am fine with it.

Diztronic TPU case

Can anyone recommend this case? I've been searching like mad for the perfect case to fit my requirements, and been having a hard time. I need a case:
Protects phone
Easily removable
Able to slip into/ carry in a side
Leather holster
Must have good grip!
I need good grip as I'm a mechanic
and dirty/greasy hands makes for
more potential dropping. The diztronic case appears to fit my needs, but would appreciate some feedback! Thanks!
Sent from my SGH-T989 using xda app-developers app

md95 said:
Can anyone recommend this case? I've been searching like mad for the perfect case to fit my requirements, and been having a hard time. I need a case:
Protects phone
Easily removable
Able to slip into/ carry in a side
Leather holster
Must have good grip!
I need good grip as I'm a mechanic
and dirty/greasy hands makes for
more potential dropping. The diztronic case appears to fit my needs, but would appreciate some feedback! Thanks!
Sent from my SGH-T989 using xda app-developers app
Click to expand...
Click to collapse
I have the diztronic tpu case and i love it. It fits better than any other case i've used for this phone. Slips in and out easily. Doesn't add much to the thickness of the phone. Only recommendation - get it in black. I had it in clear and in smoke, both yellowed in a matter of weeks. I have a black one now and it is awesome! They're pretty cheap too, I got mine on amazon. Think it was like 10 bucks or something...

Sounds good..What about fitting into a side belt holster? Will the case meterial catch too much? I'd like to avoid having to fight getting the phone in and out. Thanks man! For 10 bucks I should prob just try it out lol..
Sent from my SGH-T989 using xda app-developers app

md95 said:
Sounds good..What about fitting into a side belt holster? Will the case meterial catch too much? I'd like to avoid having to fight getting the phone in and out. Thanks man! For 10 bucks I should prob just try it out lol..
Sent from my SGH-T989 using xda app-developers app
Click to expand...
Click to collapse
The case doesn't add much thickness to the phone at all. You can get the case in matte back finish or glossy back finish. I've always gotten the matte finish, because it looks nice, slides easily, but still provides excellent grip. I've read reviews that the glossy finishes attract dust, and I would imagine the glossy finish one would get caught more easily in your belt holster. I would definitely recommend the matte back black case. I doubt you will be disappointed.
I can't post links because i'm still "new member" (i don't really post a lot), but if you search amazon for B005YEFM8M then you will see the case I am talking about. Currently going for $9.90.

Thanks for the info! I went ahead and ordered the matte black case. I'll come back here and review after I get it.
SGH T989 SII JEDI MIND TRICK V6

still waiting on the case..bump for 10th post lol
SGH T989 SII JEDI MIND TRICK V6

I have the clear one, and I like it but it has damaged my phone's frame. I think its because it doesn't fit 100% perfectly so dust accumulated in between the frame and the case, thus scratching the frame.
So just make sure you clean it often.
Sent from my SGH-T989 using xda app-developers app

joshuoner said:
I have the clear one, and I like it but it has damaged my phone's frame. I think its because it doesn't fit 100% perfectly so dust accumulated in between the frame and the case, thus scratching the frame.
So just make sure you clean it often.
Sent from my SGH-T989 using xda app-developers app
Click to expand...
Click to collapse
Yea, same thing happened to mine, but as long as you keep a case on it, you can't even tell.

Got the case today and here are my thoughts: Fit and finish is good. My biggest gripe is the sides. Its fairly easy to move the sides away from the phone, and this is especially noticed when pulling the phone out of the side holster. Not a deal breaker, but something to be aware of.
I was anticipating a bit more grip, but its not bad. For protection, I think it should do the job, although dropping the phone from chest height to concrete is something that concerns me. Hopefully I won't have to find out lol. I need a larger side holster as its a bit too tight, and retrieving the phone should be easier. I'll stick with this case for now, but still open to other options.
I still feel like I need just a tiny bit more bulk and grip, to be perfect.
SHG-T989 SII JEDI V6

Ordered a black case and loving it! Fits very nicely and not too bulky. The customer service is awesome as well. I recommend!
Sent from my SGH-T989D using xda app-developers app

Got mime in the mail today and like it so far
Sent From a Jedi Knight far far away... using Jedi Kernel

Base on the posts here, I ordered the Diztronic and just got mine yesterday from Amazon and it's a **perfect** fit for my TMobile T989. Thanks!

testrider said:
Base on the posts here, I ordered the Diztronic and just got mine yesterday from Amazon and it's a **perfect** fit for my TMobile T989. Thanks!
Click to expand...
Click to collapse
be sure to periodically clean dust from its borders because I think it scuffs the phone otherwise