Not showing up in linux - Samsung Galaxy Nexus

So I have the vzw nexus....its unlocked, rooted and cmw recovery flashed. All this was done through my windows machine. When I connect it via USB cable to my Linux machine (Ubuntu) it doesn't recognize it, has anybody else had this issue and know of a fix or something special I need to do. I really don't like having to dig out my windows machine just to put pics and videos and what not on my phone.
Sent from my Galaxy Nexus using XDA App

Do a search for MTP on the forum. There are ways of getting linux to work with MTP, but it take a bit of messing around.
In the short term, install wifi file explorer from the market.

Thanx for the info....
Sent from my Galaxy Nexus using XDA App

Recognized via ADB?

after a bit of stuffing around (ubuntu) I found wireless ftp easier.
Or airdroid, which gives you browser access to your phone from your computer, so long as they're on the same wireless network.

I have found this guide. Working so far with the exception of the auto mount option, still working this part out. All credit goes to the op of the guide.
http://forum.xda-developers.com/showthread.php?t=1077377

Related

Issue with Native USB Tethering in Windows 7

Hey all. Phone freakin rocks, and the OTA update to allow us to use WHAT SHOULD'VE BEEN THERE IN THE FIRST PLACE is great.
However, I'm having issues with getting the native USB tether to work.
I connected my phone to my Windows 7 Pro 32-bit netbook with USB debugging enabled. It said it needed drivers, so I had it install the necessary drivers. It was having problems with the ADB USB drivers so I found the solution on this forum and installed the fixed driver.
I go to the Settings menu in the phone, go to Tethering and enable USB tether. After a small delay, Windows 7 tells me there was some a problem installing the device driver, no driver found. Device Manager shows "Android Phone" under Other, and no matter what I point to the USB driver won't work.
I disconnect the phone, turn off USB debugging, and reconnect. Same problem.
I disconnect again, turn USB debugging back on, reconnect, and told it to turn on Mass Storage. Still no dice.
I'm puzzled here, as numerous reports state that It Just Works. Wonder why I'm having issues.
I haven't permrooted just yet - still using Visionary. Let me know if this is an issue.
Sent from my T-Mobile G2 using XDA App
USB Tethering
Here, I had this posted under USB Tethering. You just need an INF file.
You got the OTA update that enables wifi calling and usb/wireless tethering, right?
On your G2 Go to Settings, Wireless & networks, Tethering & portable hotspots, Help.
Under this help guide, go to the website link for USB listed there.
Go to this website and choose "USB Tethering with Windows XP"
Download the INF file "tetherxp.inf"
On your G2 check the "USB tethering" option, and connect your G2 via USB cable to your computer. Instead of using windows to automatically seach for drivers, direct the wizard to the "tetherxp.inf" file.
This will also work for Windows 7 if your having problems tethering there.
baquiller said:
Here, I had this posted under USB Tethering. You just need an INF file.
You got the OTA update that enables wifi calling and usb/wireless tethering, right?
On your G2 Go to Settings, Wireless & networks, Tethering & portable hotspots, Help.
Under this help guide, go to the website link for USB listed there.
Go to this website and choose "USB Tethering with Windows XP"
Download the INF file "tetherxp.inf"
On your G2 check the "USB tethering" option, and connect your G2 via USB cable to your computer. Instead of using windows to automatically seach for drivers, direct the wizard to the "tetherxp.inf" file.
This will also work for Windows 7 if your having problems tethering there.
Click to expand...
Click to collapse
Yeah, I saw that help link. I didn't think I needed it since I was on a Windows 7 machine. I'll go take a crack at it since at worst I'll just be back at square one.
Thanks for letting me know!
I used the driver for the HTC Hero for windows vista just google it. I have the vista drivers installed on windows 7 pro and it works great, its even faster then PDAnet which I used since my 1.6 phone days.
Sent from my T-Mobile 7 inch space banana
I have windows 7 and I installed pdanet because it has the drivers.
Sent from my T-Mobile G2 using XDA App
I am having same trouble to and I have Win7-64bit. The pdanet drivers only seems good for the adb functions. The tetherxp.inf is not being recognized at all for me.
Same issue
Hey guys, I can't tether my G2 / Vision to my Windows 7 64-bit machine either. Same issue as you all are having. The tetherxp.inf seems like it might work, but possibly only on 32-bit machines.
Is there a driver that will work on Windows 7 64-bit?
pcgeek86 said:
Hey guys, I can't tether my G2 / Vision to my Windows 7 64-bit machine either. Same issue as you all are having. The tetherxp.inf seems like it might work, but possibly only on 32-bit machines.
Is there a driver that will work on Windows 7 64-bit?
Click to expand...
Click to collapse
I got this working once using drivers downloaded from this forum. They worked.... S l o w l y. Maybe my laptop's usb sucks, but in any event it was enough to drive.me crazy.
I got MUCH better performance using wifi tethering. I just use the usb cable to keep the wifi & 3g radios from sucking the battery dry.
Sent from my T-Mobile G2 using Tapatalk
pcgeek86 said:
Hey guys, I can't tether my G2 / Vision to my Windows 7 64-bit machine either. Same issue as you all are having. The tetherxp.inf seems like it might work, but possibly only on 32-bit machines.
Is there a driver that will work on Windows 7 64-bit?
Click to expand...
Click to collapse
Im on a Windows 7 64bit machine and Tether(wireless and USB), ADB and Fastboot all work perfectly, I had to install HTC sync to my home computer to get the right drivers. The HTC sync program doesnt work with the Tmobile G2only with the Desire Z because it is Sense based, but it will install the right drivers for the G2, just install it from the following link and then hook up your G2 or Desire Z to your computer and it will install the right drivers for you:
http://www.htc.com/www/SupportViewNews.aspx?dl_id=1058&news_id=804
Just a side note make sure you are using the micro USB cable that shipped with the phone, some people were having problems using other micro USb cables.
WOW
You guys still haven't figured this out? I've been USB tethering on my XP/Vista/and 7 box since the day i got the new OTA. You need the proper drivers and also have to configure windows to use RNDIS.
It is truly that simple. I've walked many people through this already and have now started charging!
BTW
All of the methods described by the majority of the members on this site are just way too many steps. You don't have to do anything other than install 2 proper drivers. You don't need PDANet nor do you need HTC sync. You just need to be tech savvy enough, not fone savvy.
Stop trolling!
Android1126 said:
All of the methods described by the majority of the members on this site are just way too many steps. You don't have to do anything other than install 2 proper drivers. You don't need PDANet nor do you need HTC sync. You just need to be tech savvy enough, not fone savvy.
Click to expand...
Click to collapse
Seriously, I've seen u post the same thing in forum after forum without actually helping anyone... do that business or get the pot. Why on earth would you rather have people email u privately for your "wisdom" instead if just posing it?
Stop trolling.
here is the link to the driver for win7 and vista:
handheld.softpedia.com/progDownload/HTC-Hero-Drivers-Download-81097.html
here is where I found it at:
ozamora.com/2010/11/usb-tethering-htc-g2/ (the forum bot doesn't let me post a link with http:...etc. so you have to copy and paste the address yourself)
you can also search google for HTC_Driver_64.zip or HTC_Driver_32.zip
if the option to install doesn't come up automatically when you connect your G2 to your PC via USB do one of the following: hold down the windows key and hit the Pause/Break key OR click the start button (left lower corner of your screen), then find the word 'Computer' on the right of the start menu. Right click on it and click properties on the sub-menu that pups up. If you did it right you should be at "Control Panel\All Control Panel Items\System". In the left upper corner click on Device Manager. Find the device with the yellow triangle, it should say something like unknown Android device. Double click it and then click update driver. On the GIU that comes up do not select automatic, select browse my computer for driver software. Click browse and navigate to the folder where you saved and unzipped the HTC driver like "C:\Users\username.computername\Downloads\G2_HTC\HTC Driver". Be sure to check the option include subfolders. Click next, follow propts and you are done. You want to be smart about this for future use copy the uzipped driver folder to the SD card of your phone.
BTW Android1126 is a scamer, do not contact the f*&#er.
zero_0 said:
BTW Android1126 is a scamer, do not contact the f*&#er.
Click to expand...
Click to collapse
You may very well be retarded. You clowns sound like the guys from the HTC forum pertaining to this. Learn how to read. I've helped more people than I could even count with this particular problem, and what's a scamer? You really shouldn't be playing with your cell phone. Actually no, keep it up. HAHA.
"Wisdom", I'm not about to walk a million noob's (no offense, i am one too) through something so easy that they have made difficult for themselves. I'm not on the level of many of the guys on this site to be walking anyone through anything on a forum, though if I had to do it, I'd prefer an audience who would understand my direction. Both of you palsy stricken idiots definitely do not fall into that category, which is probably why you didn't receive my help previously. You can't post a definitive solution to a problem that could arise from a number of different scenarios, and even if you could, I never claimed to be up for it.
Hope you've both learned how to use Windows and your phones.
Guys.... The purpose of this thread is to help people, not alienate them.
Anyway, HTC sync may not be the *best* way to get the drivers on the phone, but it's certainly one of the easiest to explain. All that matters is getting the ndis drivers somewhere windoze will find them.
I said before in this thread that I got better performance using wifi tethering, but that's probably because the usb on my laptop has an attitude problem (adb issues even on a fresh windows install). Best part of that option is that the driver issue is avoided.
Sent from my T-Mobile G2 using Tapatalk
im coming from the incredible forums, im running Cyanogenmod 7 RC4, and im pretty sure its the same type of USB/Wifi tethering mechanism. ive searched everywhere, but i cant find the RNDIS drivers anywhere. if you seriously know how to hook up our devices to windows 7 (preferably 64bit lol) without using outside programs like pdanet, please post it here. thank you!
TheWizKid95 said:
im coming from the incredible forums, im running Cyanogenmod 7 RC4, and im pretty sure its the same type of USB/Wifi tethering mechanism. ive searched everywhere, but i cant find the RNDIS drivers anywhere. if you seriously know how to hook up our devices to windows 7 (preferably 64bit lol) without using outside programs like pdanet, please post it here. thank you!
Click to expand...
Click to collapse
(worked for me on Windows 7 32 bit, hope it helps you)
Dude, go to your device manager.
Find the Device with the little ? and then maybe a yellow !.
Right click that device and select Update Driver.
When the window pops up (on Windows 7 32bit), select, Browse My Computer for driver software, then on the next screen, click on the bottom that says, LET ME PICK.
Then it will ask you the device type.
Here you go down to Network Adapters.
Then when it asks you to select manufacturer, skip Microsoft and select Microsoft Corporation.
Then, select Remote NDIS based Internet Sharing Device.
Hit next, it will say it's not safe, etc etc, proceed to install it.
You should be set. I hope that helps.
Android1126 said:
(worked for me on Windows 7 32 bit, hope it helps you)
Dude, go to your device manager.
Find the Device with the little ? and then maybe a yellow !.
Right click that device and select Update Driver.
When the window pops up (on Windows 7 32bit), select, Browse My Computer for driver software, then on the next screen, click on the bottom that says, LET ME PICK.
Then it will ask you the device type.
Here you go down to Network Adapters.
Then when it asks you to select manufacturer, skip Microsoft and select Microsoft Corporation.
Then, select Remote NDIS based Internet Sharing Device.
Hit next, it will say it's not safe, etc etc, proceed to install it.
You should be set. I hope that helps.
Click to expand...
Click to collapse
P.S. btw you may have to remove other drivers you tried to install first. Good luck, let me know if it helped.
I had to do that twice, but I got it to work. Thanks, man.

[Q] Can't Connect GNex to PC Using USB

I am having trouble connecting my GNex to my Windows XP PC using the USB. My PC can't install the MTP hence unble to recognise my GNex.
I'm using the GSM model running 4.0.1 Android.
Please help...
It's difficult for many XP users, and worse for people like me who run linux and atm afaik there's no easy wired solution if you want to stay on the same OS.
There's a couple of long threads about it, in summary for the least effort switch to a wireless transfer app, I'm using airdroid which is free and easy to use, so long as your pc and phone are on the same network.
Related?
http://forum.xda-developers.com/showthread.php?t=1472069
Melhouse said:
Related?
http://forum.xda-developers.com/showthread.php?t=1472069
Click to expand...
Click to collapse
Melhouse, thanx for the info. However, my pc do know that MTP is connected but cant install, so I cant open the driver..
Sent from my Galaxy Nexus using XDA App

GNex not recognized in Windows 7

I need help getting my Windows 7 x64 to recognize my GNex.
Whenever I plug it in I dont hear the default USB plug-in sound (Windows), but my phone is charging.
I cannot mount my storage either in recovery or inside Android.
My device manager is not showing errors and my GNex at all.
Tried installing the Google USB Driver from SDK, no luck
Tried PDANet which did not install because of missing drivers.
Use a program called usbdeview and uninstall the drivers you have installed for the Gnex. Then use the galaxy nexus toolkit to install the correct ones.
You dont by chance have the "fast charge" mod enabled through your kerenel do you? Because if so you will need to disable the feature first before plugging up to you Windows machine.
This is starting to become an "epidemic".. :O
I can almost guarantee that it's usb fast charge, devs should really put a warning on that
Sent from my Galaxy Nexus using XDA
Hemulen said:
I need help getting my Windows 7 x64 to recognize my GNex.
Whenever I plug it in I dont hear the default USB plug-in sound (Windows), but my phone is charging.
I cannot mount my storage either in recovery or inside Android.
My device manager is not showing errors and my GNex at all.
Tried installing the Google USB Driver from SDK, no luck
Tried PDANet which did not install because of missing drivers.
Click to expand...
Click to collapse
I too have a Win7 x64 laptop and had a similar issue, but the Device Manager did report an error with the Android 1.0 and/or Samsung driver. I had to manually update driver for it to work thru Device Manager.
Woops. Well there are some ways to check what is disturbing the connection. Let's start at the beginning:
Check if your phone is configured to interact with your computer. After conneting your phone you should get a selection list in your phones notification bar. Make sure to select usb storrage from that list.
On your windows computer go to [start] and type "device manager". After the application (that shows all hardware devices connected to the system) loaded connect your phone and check if something changes. If everything works all right you should get your nexus. If a question mark apears double click it to check the problem.
Try yo connect your device to another computer or with another cable. If the problem is not solved by above steps contact your seller.
If this is not possible install Airdroid and connect your phone to your computers browser or ES file Explorer to browse your pc over the network
Sent from my Galaxy Nexus using XDA
amonfog said:
Check if your phone is configured to interact with your computer. After conneting your phone you should get a selection list in your phones notification bar. Make sure to select usb storrage from that list.
Sent from my Galaxy Nexus using XDA
Click to expand...
Click to collapse
You've missed episodes..
Yeah I just saw... just copy-pasted an other reply I made somewhere, since these problems occur a lot around here..
Sent from my Galaxy Nexus using XDA
Ok, I'm having this issue, but Windows doesn't even recognize anything is plugged in! I tried it on a TON of computers at work with several different USB cables. Nothing! All I get is charging, but no options in the top menu or anything. Is this a toasted Nexus? I just got it, now I can't even transfer files to its storage. I've been transferring files through dropbox...which is annoying...if it is USB Fastcharge, how do I disable it?
Their IS a fix for this, but we need the code to get into the PhoneUtil menu and turn USB back on.
It's an issue with Samsung phones apparently, and here's a fix someone found a while ago.
http://blog.vacs.fr/index.php?post/...ot-detected-problem-on-Android-Samsung-phones
We just need the PhoneUtil code for the Galaxy Nexus and we should be all set.
Check your drivers
Sent from my i9250 [GSM) Galaxy Nexus
What annoys me is that when I got the phone it was already rooted and I didn't have a chance to try it stock or back up the original. It was rooted with an older version, so I flashed 4.0.4 on it. Check out the reviews on newegg I'm not alone in reporting a messed with Galaxy Nexus.
Sent From My Asus Nexus Bumblebee
My issue is definitely hardware. I sent my GNex back and they sent me back a new one which I received yesterday. I checked and this one wasn't previously rooted or Unlocked. It worked for a day (worked as in windows saw it and I could xfer music/books/comics to it) after I get home from work Windows stopped recognizing it. I did NOTHING to the phone, it just stopped being seen by windows. I only used the cable that came with it and charged it the night before using the supplied adapter, but the USB still stopped working. Last resort I did a system restore to the phone and the USB still doesn't show up in anything ,Tried 5 of my Windows PC's A bunch of PC's at work, my friends Mac, my Ubuntu powered Netbook, my Xbox360 and PS3, even the Transformer Prime using the keyboard dock. This is telling me it's a hardware issue with the Device. Might be somthing wrong with the latest batch of GNex's but the USB seems to give out. Even if I put the phone in ODIN mode NOTHING recognizes it. So, before you all waste your time finding a fix, this is 100% absolutly a hardware issue with these phones, I don't know why, but I had Two bad ones in a row, and am Hoping my 3rd isn't borked too.
I have a bad history with Android phones....My first Nexus One wouldn't stay on, so I got a replacement from HTC. My first two G2x's would constantly reboot, It wasn't until the 3rd one that I got a working one. Now I'm hoping I don't have to go through 4 bad Galaxy Nexus' before getting one that actually works!
I have the opposite luck with tablets....the Novo7, Iconia A100 and Transformer Prime have been perfect outa box. This ordeal with android phones makes me seriously consider exchanging the GNex for an iPhone4s....but the iPhone4s screen is SOOOOO tiny!!!

[Q] Heresy Alert: SGSIII connected to a MacBook

Hey Folks,
I'm likely to be switching from AT&T to Sprint and will be getting the Galaxy SIII. Has anyone had any problems connecting it to a Macbook? I'd like to be able to sync with DoubleTwist.
Thanks!
MD
I've had trouble connecting mine. I end up using my work Windows PC for rooting etc.
Sent from my SPH-L710 using xda app-developers app
Seems that there are no drivers for Mac SPH-L710 Samsung Support Page
Wonder why... *rollseyes* You can do as bluv4eva and use a windows pc, if you have one in your disposition.
try this link, might have some info on how to connect with mac.
http:// galaxys3root.com/galaxy-s3-root/how-to-root-galaxy-s3-on-mac-osx/
The only way i connect my S3 to my Mac is via FTP apps (wirelessly) like Transmit, or i just use ES File Explorer to FTP files back and forth over my WiFi network, or use Kies.
Gave up on USB since it defaults to MTP (Media Transfer Protocol) which just doesn't work on Macs. Couldn't get it to do UMS (Universal Mass Storage). As for music, i prefer drag and drop (via FTP).
.....and what's the heresy?? Been using Palm OS and Windows Mobile devices with my Mac since time immemorial.
Well actually i have a macbook pro running mountain lion and i been able to connect it with no problem with android file transfer( an app that is free supplied by android i think) it shows instructions for it when you connect it to your computer on your phone
nitekillerz said:
Well actually i have a macbook pro running mountain lion and i been able to connect it with no problem with android file transfer( an app that is free supplied by android i think) it shows instructions for it when you connect it to your computer on your phone
Click to expand...
Click to collapse
Tried Android File Transfer and nothing. To be fair I was on Lion then, not MLion, and just didn't bother after that.
I like my wireless methods so far.
nitekillerz said:
Well actually i have a macbook pro running mountain lion and i been able to connect it with no problem with android file transfer( an app that is free supplied by android i think) it shows instructions for it when you connect it to your computer on your phone
Click to expand...
Click to collapse
Plus one one that, I have mountain lion and it is very easy to drag and drop files and sync.
Sent from my SPH-L710 using Tapatalk 2
interhawk1 said:
Plus one one that, I have mountain lion and it is very easy to drag and drop files and sync.
Sent from my SPH-L710 using Tapatalk 2
Click to expand...
Click to collapse
Syncing with sd_card or usb mode shouldn't be a problem on any device that accepts USB storage devices.
the only difference between using windows and OS X will be the ability to use MTP because microsoft is the only one that supports that particular file transfer protocol.
doubletwist sync, last i checked, didn't use mtp mode regardless of the OS of the box its connected to.
There's also airdroid from the play store that connects with phone via wifi.
Sent from my SPH-L710 using xda app-developers app
back on lion i was able to do it too. What i did was i changed the storage to camera mode on phone and the file transfer app works
Virtual Machine approach to rooting
If you have a mac, and a copy of windows, create a little virtual machine using Parallels Desktop. (Note: VMWare Fusion will not work.)
Once you have your virtual machine running, Install the S3 Snapdragon Toolkit and USB drivers, connect your phone using the USB cable. Make sure to associate the phone with the VM and not OS X when prompted.
On your phone, set the mode to PTP, not MTP. You'll hear the USB device connect sound and the phone will show up as camera device, but don't focus on that. Now, run the toolkit and you'll find at the main menu your phone listed as an attached device.
Many thanks to mskip for his toolkit development.
netkgb said:
If you have a mac, and a copy of windows, create a little virtual machine using Parallels Desktop. (Note: VMWare Fusion will not work.)
Once you have your virtual machine running, Install the S3 Snapdragon Toolkit and USB drivers, connect your phone using the USB cable. Make sure to associate the phone with the VM and not OS X when prompted.
On your phone, set the mode to PTP, not MTP. You'll hear the USB device connect sound and the phone will show up as camera device, but don't focus on that. Now, run the toolkit and you'll find at the main menu your phone listed as an attached device.
Many thanks to mskip for his toolkit development.
Click to expand...
Click to collapse
Parallels Desktop is a little pricey at $80, but it sounds super awesome. Thanks for this.

What I really really hate about this phone? No native USB support

The usb storage. MTS or whatever you call it . Very slow, terrible for navigating/editing multiple directories/windows at once. Frustrating. Can only find size of files by going in the directory and selecting all files. Anyone know of a good quick solution to this? I've played with the common game editor but don't really see it as encompassing the solution to all the problems of not having the classical USB mount
You think thats bad? Try having Mac. I can't even get it to recognize me phone lol. I'm forced to used my windows machine.
And I believe its a JB thing, not necessarily Samsung.
Sent from my SGH-I747M using xda app-developers app
g2tegg said:
You think thats bad? Try having Mac. I can't even get it to recognize me phone lol. I'm forced to used my windows machine.
And I believe its a JB thing, not necessarily Samsung.
Sent from my SGH-I747M using xda app-developers app
Click to expand...
Click to collapse
I had this problem too with my macbook pro then I found a solution tonight. Try this:
1. Install Kies if you haven't already, if you have make sure it's updated.
2. Connect your phone.
3. In Kies, click Tools, then Install Drivers (this will reinstall drivers
4. Download Android File Transfer.
Should work after this. Also make sure you have USB Debugging on and use PTP not MTP.
johnnyutah22 said:
I had this problem too with my macbook pro then I found a solution tonight. Try this:
1. Install Kies if you haven't already, if you have make sure it's updated.
2. Connect your phone.
3. In Kies, click Tools, then Install Drivers (this will reinstall drivers
4. Download Android File Transfer.
Should work after this. Also make sure you have USB Debugging on and use PTP not MTP.
Click to expand...
Click to collapse
I will be sure to give this a shot tomorrow and send along an update. I rarely use Kies, updated it yesterday but never tried the drivers thing. Android file transfer never used to work but maybe the "install drivers" step is all that's needed.
And thats why I love it here on XDA. Thanks for the help brother!
Sent from my SGH-I747M using xda app-developers app
I agree... coming from a s2 skyrocket, I really miss UMS. Why bother having expandable storage when it takes hours to transfer to a class 10 32gb sd card? That is if I can get it to transfer at all.
I'm now resorting to unmounting sd card and putting it in the computer to transfer files...big PITA
SGS3 Easy UMS doesnt work either.
Edit: Actually, I'm using kies now... still miss drag and drop
Agreed. Always had driver problems with this phone. Sometimes it wouldn't connect because drivers failed to install or "bad hardware ID" pops up in the corner. Only way to get it to work was to restart comp. And it would only work until I disconnected it, then gotta restart again. -.-
I'm gonna switch back to linux once I get some free time. I recommend you do the same.
g2tegg said:
And I believe its a JB thing, not necessarily Samsung.
Click to expand...
Click to collapse
It was a problem in ICS as well. I think the reason for that they went with MTP is that users would create a "messy" file structure when they randomly dragged and dropped files anywhere on both the internal and external card. Samsung can keep things organized when they encourage you to use Samsung Kies to add files to the device.
The mandate for MTP is also to reduce piracy of protected media files by ensuring the DRM is properly done. In the past, I could connect my phone directly to my Samsung SMART TV and play 720/1080p movies via UMS. This is now blocked with MTP.
Anonymously_Unknown said:
It was a problem in ICS as well. I think the reason for that they went with MTP is that users would create a "messy" file structure when they randomly dragged and dropped files anywhere on both the internal and external card. Samsung can keep things organized when they encourage you to use Samsung Kies to add files to the device.
The mandate for MTP is also to reduce piracy of protected media files by ensuring the DRM is properly done. In the past, I could connect my phone directly to my Samsung SMART TV and play 720/1080p movies via UMS. This is now blocked with MTP.
Click to expand...
Click to collapse
Thanks I also noticed the slow data transfer speed when I upgraded my SII to S3. Thought it was something I was doing wrong. I've changed the default transfer to PTP and will check it out tonight.
seamus24 said:
I've changed the default transfer to PTP and will check it out tonight.
Click to expand...
Click to collapse
Don't bother with PTP. PTP is just a camera. It's not like UMS so you might as well leave it on MTP
g2tegg said:
You think thats bad? Try having Mac. I can't even get it to recognize me phone lol. I'm forced to used my windows machine.
And I believe its a JB thing, not necessarily Samsung.
Sent from my SGH-I747M using xda app-developers app
Click to expand...
Click to collapse
I was annoyed by this as well. Now when I want to add something to my sd card I just take it out of the phone and put the sd card in my Mac and add files that way. It's a little annoying but its not that big of a deal.
I think the closest you'll get to a true UMS experience is using Samba Filesharing Server (https://play.google.com/store/apps/details?id=com.funkyfresh.samba). You can then treat it like a network shared drive.
Of course you'll be limited by your WiFi speed. I think a possibility would be a USB host adapter and a USB ethernet adapter. I'm not sure if Android has support for a USB ethernet adapter but if that works then you should be able to connect to a gigabit switch/adapter and just be limited by USB2 speed.
It's not just this phone in general. They're all going that way as of ICS (Honeycomb as well) and up. If you use Windows it's not terrible but it is still slower. And yeah trying to use it with my Mac or even my Linux box is just frustrating. The primary reasoning was to merge the data and application volumes to give more space for applications. This is a better explanation of it. I do miss USB storage mode though.
Yep, totally frustrating for me also.
I remove my microSD card when I need to do lots of file management. But it's a clumsy workaround.

Categories

Resources