Develop Bugs

Okay, maybe buy clear battery door from custom evos BAD EXPERIENCE (Positive Update)

Okay, so I ordered one a WHILE ago, and I received it. The door did not fit, in other words, it required an immense amount of pressure to place it on the phone with all clips holding, and even then the stand would not come out of the back of the case without excessive, and i mean excessive, force. When it was out, when you pushed it back in, it shifted the door out of place and forced one of the clips to pop off. It was not form fitting, as in there were gaps between the battery door and the back of my evo. Just for kicks I tried it on another evo, maybe it was just mine. Didnt fit there either. I contacted by email, no response. Website? no response. I eventually received a PM on the xda-developers forum, and was told to record a video of the problem with the battery door and send it to joey3002.
Really? Honestly? Over a 17 dollar battery door, I need to record a video and send it to you? Like the hassle of trying to get ahold of you and send it back to you is not enough, I would do it for pure amusement?
If I was really that ignorant, and could not figure out how to put it on, the worst that would happen is that you would receive a perfectly functioning battery door in exchange for another functionally perfect battery door, and be out the 44 cents for shipping it.
I understand that this was a great undertaking on your part, and you are trying to make a buck like the rest of the world. But I think that your customer service has to improve a bit.
I am sure there are many people who are happy with their clear battery doors, and the idea is f****** awesome, but there is no order support whatsoever, I wasted $17, and its just sitting on my desk in the same plastic wrapping it came in months ago.
/endrant
UPDATE: Joey is working with me. I was incredibly frustrated, and hopefully this will rectify the problem. I will keep posted.

So the seller its on here?
Sent from my Evo, ho!

Same thing happened to me with mine. I got a Dremel and just slightly grinded down the slot for the kick stand and it's been working lovely for months now. Taking it off feels like you're going to break off one of the clips or something, so I just pop the top clips off when I need to remove the battery and only take the whole thing off if I need to remove the SD card. It's not a PERFECT fit, but I like the look of it so I deal with it.

jefe00 said:
Okay, so I ordered one a WHILE ago, and I received it. The door did not fit, in other words, it required an immense amount of pressure to place it on the phone with all clips holding, and even then the stand would not come out of the back of the case without excessive, and i mean excessive, force. When it was out, when you pushed it back in, it shifted the door out of place and forced one of the clips to pop off. It was not form fitting, as in there were gaps between the battery door and the back of my evo. Just for kicks I tried it on another evo, maybe it was just mine. Didnt fit there either. I contacted by email, no response. Website? no response. I eventually received a PM on the xda-developers forum, and was told to record a video of the problem with the battery door and send it to joey3002.
Really? Honestly? Over a 17 dollar battery door, I need to record a video and send it to you? Like the hassle of trying to get ahold of you and send it back to you is not enough, I would do it for pure amusement?
If I was really that ignorant, and could not figure out how to put it on, the worst that would happen is that you would receive a perfectly functioning battery door in exchange for another functionally perfect battery door, and be out the 44 cents for shipping it.
I understand that this was a great undertaking on your part, and you are trying to make a buck like the rest of the world. But I think that your customer service has to improve a bit.
I am sure there are many people who are happy with their clear battery doors, and the idea is f****** awesome, but there is no order support whatsoever, I wasted $17, and its just sitting on my desk in the same plastic wrapping it came in months ago.
/endrant
Click to expand...
Click to collapse
Chargeback, duh. Had a similar experience with a screen protector that claimed to be bubble free and had 8 bubbles when I applied it precisely according to the instructions.
I emailed them once, did not receive a satisfactory response (to use scotch tape or something), called my CC company for a chargeback, got an immediate credit and final approval in a few days.

I bought one when I first got my Evo, I think it looks great. The fit is tight, when you first get all the clips in place, you almost have to slide the case down then to have it completely. It does allow dust to get under the cover which matters more as the cover is clear, but the stock cover does that also (not quite as much, but it still does nonetheless). To take it off I slide a credit card or some other similar card along the edge to pop all the clips out, then just take it off normally. So it is an incredibly tight fit, but it works fine for me. I swap between my old hero battery and Evo battery as needed, and I don't find it difficult at all once you have a system down pat to remove it.

I had the same issue, pm'ed and got no response...
followed videos and everything and nothing worked...oh well.

Tuffgong4 said:
I had the same issue, pm'ed and got no response...
followed videos and everything and nothing worked...oh well.
Click to expand...
Click to collapse
Chargeback. Call your CC company. Tell them it's crap. They will take the money from the merchant's account and put it in yours.
The only way to get through to shady sellers is to hit them where it hurts, their bank accounts.

Sounds cool though
Sent from my PC36100 using XDA App

Thanx man, for alarming. I had quit buying add-on accessories since i found they usually don't fit.

Mine fits great. Been using it for months and I'm happy. :shrug:

sph33r said:
Mine fits great. Been using it for months and I'm happy. :shrug:
Click to expand...
Click to collapse
Same here. I have 3 of them and they all work fine. Not one speck of dust has ever got in there and I have it in and out of my pocket all day. The fit was a bit funky when I first put it on but it settled in within a week and has been great ever since.
For those of you with complaints, the seller (Joe is his name) will work with you but remember, he's just another member like you and me who decided to make these. He's a regular guy with a day-job and a family and definitely NOT here to rip anybody off! Just be patient and he will work something out with you.

I have reached out to joe, he has either ignored me, or not responded, or asked me to record a video, as I stated. I think it might be too late for a chargeback unfortunately.

I had the same fitment issue. Tried it on both mine and the wife's evo. I emailed him twice through his site and sent 3 pm's. Nothing.

the maker of these battery doors is still an idiot.

scirio said:
the maker of these battery doors is still an idiot.
Click to expand...
Click to collapse
Ha ha ha, he mustve taken your money too.
Sent from my Evo, ho!

JUST2SUAVE said:
Ha ha ha, he mustve taken your money too.
Sent from my Evo, ho!
Click to expand...
Click to collapse
no, this was the guy when we (xda users) tried do this bet it would never happen.. he never paid the bet btw
anyway, all this negativity.. cmon...
the OP has been taken care of, thanks for the video.

aph said:
Chargeback, duh. Had a similar experience with a screen protector that claimed to be bubble free and had 8 bubbles when I applied it precisely according to the instructions.
I emailed them once, did not receive a satisfactory response (to use scotch tape or something), called my CC company for a chargeback, got an immediate credit and final approval in a few days.
Click to expand...
Click to collapse
hahaha, that's because you didn't apply it correctly. you did a chargeback for $8 over your own mistake? you do use scotch tape to remove bubbles! remind me to punch you in the nuts if we ever meet.
Sent from my PC36100 using XDA Premium App

by the way my clear door never fit right either, if you pulled out the kickstand it would pop off.
Sent from my PC36100 using XDA Premium App

Case With Credit Card Slots

Has anyone used this case? I bought the kickstand case and after 3 weeks the bottom half of the kickstand broke off. I was thinking of getting the credit card case because in L.A. we have these things called Tap cards for bus passes. You just tap it onto a sensor and it'd be easier for me to tap my phone and put the card in the slots. Is the case fine? Is the plastic between the slots and the back of the thick or just right for sensors to maybe reach it?
Sorry for writing so much!
Thank You.
Sent from my HTC Glacier using XDA App

I don't know about those cases but that's a great idea! I wouldn't mind having one for a pay pass debit card. They work on the same concept.
Sent from Royal Glacier 2.1 powered HTC MyTouch4G using XDA App.

i have the case mate for the mt4g. it hold up to 3 cards. works amazingly. not sure about your bus pass though

I've used that case since December of last year. It's a really nice case and it holds 2 cards, but I managed to fit one more, lol. As far as the Tap card goes, I'm not sure. Never tried it. I always had the Tap in my pocket. Not so sure if it'll work since it is a little thick.

I have one really convenient

Where did you guys find this case with credit card slot?
please link.

^google "casemate mytouch 4g"

I love mine, had it on since I bought phone last year. It is only good for 2 cards though, I have found 3 makes it too tight to pull them out. It has literally saved my phone from a lot of damage.

lion766 said:
I love mine, had it on since I bought phone last year. It is only good for 2 cards though, I have found 3 makes it too tight to pull them out. It has literally saved my phone from a lot of damage.
Click to expand...
Click to collapse
Planning on picking this up at local TMO store today after work. They have em on sale for $15, and my best skins ever is peeling off, so I figured why not? I like the idea of the card holder...any more updated reviews on this case? Does it protect decently? Not too bulky?
UPDATE in case anyone reads this thread: The $15 price was only for online TMO, in-store was still $35. But I wound up getting it on Amazon for $10
Quick review: Love the case. It adds a little bulk to the back of the phone (due to the slot for cards), but not much - and I consider it worth it because I can fit: my drivers license, my bank card, my metro pass, and my gym key card all in the space provided; which means I don't have to carry my wallet around, so the slight bump in the back of the phone is worth it to me. (Side note that makes this case more beneficial: there's growing evidence to support that carrying a wallet in your back pocket can lead to serious back problems).

Google Wallet success rates?

Hi All,
I've set up Google Wallet (Flash: 1.1-R41v8, APK: 1.1-R48v4) using the APK here:
http://forum.xda-developers.com/showthread.php?t=1365360
So far, the Google Prepaid MasterCard has only worked at one location, CVS (after the cashier pushed credit). The phone has failed to react at all to tap-to-pay readers at McDonald's, Tim Horton’s and Coke machines. I've even ensured that both the phone and Wallet app were unlocked prior to tapping the reader, which should not be necessary. You get really wired looks when trying to pay with your phone does not work.
My only theory at this point is that my OtterBox Defender case is preventing the necessary proximity the NFC chip needs to detect the reader, or it is blocking the RF somehow. I do know that CVS had a different reader than everyone else. Perhaps it has a stronger signal?
Has anyone else had issues with NFC and an OtterBox case? What have your success rates been with Google Wallet transactions?
I'm planning on testing Google Wallet without my case soon; I'll post the results here.

I've seen other reports about an Otterbox case and NFC, pretty much any thick case will cause issues and if there's any sort of metal in it you're pretty much completely out of luck. I've never had any issue with my naked Nexus at McDonalds or 7-11, at least not until people whined that they couldn't figure out a lockscreen and they broke my prepaid card access...

Auto - sleep...

Have had bad experiences with cases where the magnets haven't cooperated and the auto-sleep feature has been less than convenient. The s pen hasn't worked correctly and sometimes the tablet has gone to sleep without me touching the power button... just because the case has been folded so that the magnet has been pressed to the back of the tablet. Cheap cases? I confess... yes they have been. But after the first one I didn't really want to risk buying a more expensive one just to end up sitting with the knife and cutting out the magnet again. So l bought another cheap one... to see if the first one had been a "bad luck buy". Well, it wasn't and the second one behaved the same way... and the third one too. Is this a typical "cheap case thing" or is it something you can expect also with the more expensive ones? The best thing would of course be if this was an optional feature... that you can disable. On my iPad it's optional with a switch in the settings. I haven't found something on the Note 10.1 though. So my questions are...
• IS this a typical "cheap case syndrome"?
• IS the function optional on the Note 10.1 2014? (Or can it be done in another way?)
/ Nick

Runarsson said:
Have had bad experiences with cases where the magnets haven't cooperated and the auto-sleep feature has been less than convenient. The s pen hasn't worked correctly and sometimes the tablet has gone to sleep without me touching the power button... just because the case has been folded so that the magnet has been pressed to the back of the tablet. Cheap cases? I confess... yes they have been. But after the first one I didn't really want to risk buying a more expensive one just to end up sitting with the knife and cutting out the magnet again. So l bought another cheap one... to see if the first one had been a "bad luck buy". Well, it wasn't and the second one behaved the same way... and the third one too. Is this a typical "cheap case thing" or is it something you can expect also with the more expensive ones? The best thing would of course be if this was an optional feature... that you can disable. On my iPad it's optional with a switch in the settings. I haven't found something on the Note 10.1 though. So my questions are...
• IS this a typical "cheap case syndrome"?
• IS the function optional on the Note 10.1 2014? (Or can it be done in another way?)
/ Nick
Click to expand...
Click to collapse
Firstly I have a book cover and have no trouble. I think it is a cheap case thing. Samsung official book cover has magnets in it and from what people say they have no issues with them. In settings there are an options for the book cover in accessories section try play with those settings.
BTW: the name of my case is Snugg it was $18.
Sent from my SM-P600 using XDA Free mobile app

Funny thing... maybe something I should keep to myself. But what the heck. Noone here knows me anyway. I found the option now... and not only that. I had actually turned it off. I must have done it by mistake while looking for it, because I sure can't remember ever finding it. Blind or senile. I must be at least one of them. LOL
But out of curiosity. I gather it must be some kind of sensor in that area since l was moving the cover's magnet area around and when it came close to that area it turned off without the screen being covered. Does that setting control the function or does it control the sensor itself? (If it only controls the function, the S Pen would still have behaved weird. around that area.)
Well, thank you anyway. Now I don't have to wonder about the setting anymore. Now I'm more worried about how come I never found it myself. l thought I had looked everywhere... including that area. But now I found it instantly. Far from hidden (even in a settings group with the NAME 'Book cover'). Maybe time for the annual doctor's checkup.

Note 10+ AOD along the right edge?

I have ordered a cheap Chinese imitation of the Note 10+ S View case which when genuine makes the AOD display down the right edge so it is visible through the cases clear edge. I am presuming the imitation case will not do this so am asking how can I? (of course I might get a nice surprise but I doubt it!).
I'm sure I read how to do that somewhere quite awhile ago but any DuckDuckGo-ing does not turn anything useful up.
Going through settings did not prove fruitful either.
Thanks for the heads up.

NoteTaker said:
I have ordered a cheap Chinese imitation of the Note 10+ S View case which when genuine makes the AOD display down the right edge so it is visible through the cases clear edge. I am presuming the imitation case will not do this so am asking how can I? (of course I might get a nice surprise but I doubt it!).
I'm sure I read how to do that somewhere quite awhile ago but any DuckDuckGo-ing does not turn anything useful up.
Going through settings did not prove fruitful either.
Thanks for the heads up.
Click to expand...
Click to collapse
Sorry, I have no idea, but I would be interested in your experience with this case, I was thinking of going down the same route, the official case being way too expensive.

kxdaorbit said:
Sorry, I have no idea, but I would be interested in your experience with this case, I was thinking of going down the same route, the official case being way too expensive.
Click to expand...
Click to collapse
I'm at the point where I think there are only 2 ways its going to happen, either the case has the appropriate bits that make it happen (which I doubt but you never know) or I have to trick the phone into thinking a real case is there.
The settings needed, in accessories it seems, to show the AOD down the right side, do not show up until the phone knows the case is there, from some quick searching it seems this is done with magnets and hall effect sensors to tell the phone the case is fitted, if the info I have stumbled upon is correct. I don't know why Samsung would not let people have the choice of the AOD down the side at any time if they would like instead of only with that case?
So if the case does not have these magnets I will play around until I get something with some small rare earth magnets and see what happens? It will be easy to glue them into the case if it works.
If none of the above works I may have to anti up for a real case....drat.
I like 'em but I'm not sure if I like 'em that much!
(it just struck me that I do not need to wait for the case to try some magnets and see what happens!).
EDIT: ok bad news I'm afraid - the AOD down the right side is NOT on the Note's screen, its on the clear part of the case which is a screen of sorts itself! The case has quite a few tricks and is probably why it costs so much. Bummer. Oh well, the cheap Chinese case will do for now while I agonize over whether to part with the dough for the real Sammy case! I may find that I don't like that type of case that I have to open all the time and I found out cheaply! That's about the only good outcome.

I'm not sure exactly which case you are referring to but the Samsung Clear view cases are just that, a clear part in the case that lets you see the screen.
So possibly some bad news, I have one of the LED cover cases, could be different but when I put the case on the phone it unlocks an app and wallpapers in the phone that let you control the case. In the LED Cover app, the case has its own serial number and strangely, the date I "registered" the case with the phone and there is a date when the software will expire in 3 years. So without access to the app, I think you're stuck.

willhemmens said:
I'm not sure exactly which case you are referring to but the Samsung Clear view cases are just that, a clear part in the case that lets you see the screen.
So possibly some bad news, I have one of the LED cover cases, could be different but when I put the case on the phone it unlocks an app and wallpapers in the phone that let you control the case. In the LED Cover app, the case has its own serial number and strangely, the date I "registered" the case with the phone and there is a date when the software will expire in 3 years. So without access to the app, I think you're stuck.
Click to expand...
Click to collapse
Yes without the case to tell the phone its there and activate the setting in accessories nothing will happen. I have since found out that the info about the case having a screen is wrong, don't trust Youtube! It is the Note's screen that does everything, after watching another couple of vids I could see the AOD display on the Note's screen briefly when they opened the case.
I wonder if any app developer would like to write a small app to make this happen whenever a person would like, that would cure the problem. I asked in AOD notify thread about this. I'm sure it would not be too hard at all. I think there would be a bit of demand especially from cheap case owners!
I should know by Wednesday at the latest if the cheap case tells the phone its there, it would be nice.

So the case arrived finally.
As expected it does not do anything, its just a case i.e. it does not tell the phone it is there. The special section in accessories is therefore not accessible. No AOD down the side.
The case itself is actually quite nice, seems well made, pretty good considering it was only 5 bucks.
Having said that I don't like the case when it is open, it makes holding the phone awkward so I most likely will not now ever buy the genuine Samsung case which will be the same in this attribute. I have heard this criticism about the sammy case.
I will use it for now to get my 5 bucks worth but will most likely take it off soon enough and put the sammy silicone case back on.
A shame because I like the look of the case on the phone closed and like the screen being protected but I feel that when open the case will likely be the cause of drops so it will have to go me thinks.

So a small update; There is an app in Play Store that will put an AOD style clock down the right side of the screen, right in the right spot for these cheap cases. It is called Edge Clock for S6 but works on most devices and on the Note 10+ too.
It at least makes use of the clear part of the case, kind of like you get with the genuine sammy case but it is just a clock and costs 4 bucks.
Seems to work quite well, different colors available etc. It is not an AOD but you have to run the app which makes the rest of the screen black while it runs the edge clock. I'm using it at home so my phone is unlocked which I find convenient, I get a kind of AOD display like I would of got with the real case so I'm kinda pleased with it.
I have gotten used to the case and have left it on, the initial dislike of when the case is open has passed and there have been no case induced drops, thankfully.
Hope this helps someone.

Couldn't you just have the AOD show the clock down the right side of the screen instead?
Sent from my SM-T860 using Tapatalk

For me, there is the AOD setting for the right-side of the screen. When you are choosing your "Clock Style" in AOD settings, scroll through the list all the way to the right, where there is a 'clock' logo, click it, and there should be 5 additional settings. The last one listed there is the right-side option.
https://imgur.com/a/vYPyrKA

Eddie_Brock said:
For me, there is the AOD setting for the right-side of the screen. When you are choosing your "Clock Style" in AOD settings, scroll through the list all the way to the right, where there is a 'clock' logo, click it, and there should be 5 additional settings. The last one listed there is the right-side option.
https://imgur.com/a/vYPyrKA
Click to expand...
Click to collapse
Well damn. I have 36 in mine and i don't have that one.

skryte said:
Well damn. I have 36 in mine and i don't have that one.
Click to expand...
Click to collapse
I'm on the N975W software, which is compatible with the N975U1, as I had that flashed for a couple weeks too. (Can't recall if the side-view was there or not, sorry)

Quote:
Originally Posted by skryte
Well damn. I have 36 in mine and i don't have that one.
Same here.
It would be nice if someone knew which APK it is with the AOD clock down the side so it could be downloaded and installed for us "not have's"!
The app I spoke of (S6 clock) is OK but it means when using it the phone is actually on and unlocked i.e. the app does not run on the lock screen.

Another Update.
I have found a free app that does what we were really looking for, AOD down the right side on the lock screen with clock, notifications, battery percentage etc!
HooRay!
It is called Always On Display Edge Lighting Super Amoled....yeah a mouthful but it works....except for 1 small problem but easily fixed me thinks.
For some reason it uses the proximity sensor and it switches the display OFF if the case is closed?? yeah I dunno why but I am going to drill a small hole in the case in the right spot to fix that PITA problem early tomorrow morning, bit late now.
So suck it sammy, I got my cheap chinese case AND my AOD for 9 bucks (case 5, first app 4 {now redundant}) second app free!
Hope I have helped someone.

Your selecting the wrong icon select the one that looks like the clock
No need for another app

Your selecting the wrong icon select the one that looks like the clock
No need for another app
It does not matter which clock I select the one I want is not there.
As reported by others as well. Some have it, some do not.
Possibly a region thing, who knows.

Your picking clockface you have it it comes stock
uninstall clockface and I bet it's there
Then you will see it where it Is
Then reinstall clockface
Don't uninstall all of good lock just clockface