Related
Has anyone done it before? There is a video on youtube, but it only goes as far as the keyboard. I'm looking to get to the LCD to fix/replace it because of discoloration from water damage. Anyone thinks it's possible?
I remember a thread like this being made a while ago...if you're on a computer, just search and you should find it. I can't post a link, but I think the guy in that thread replaced it succesfully.
There was also alotta chatter about insurance covering it
Sent from my SPH-D700 using XDA App
Here's a tear down of the Epic 4G:
http://www.chipworks.com/en/technical-competitive-analysis/resources/recent-teardowns/2010/09/teardown-of-the-samsung-epic-4g-smart-phone/
Try asking a repair technician. The truth is, body repairs can be quite pricey - to the point where you might as well be getting a new phone in many cases.
I watched someone else take mine apart. There are an awful lot of little screws, but you can definitely seperate the case, the screen, and the actual guts in about 10 or 15 minutes.
DiGi760 said:
I watched someone else take mine apart. There are an awful lot of little screws, but you can definitely seperate the case, the screen, and the actual guts in about 10 or 15 minutes.
Click to expand...
Click to collapse
The question then is can you get it back together ;-)
Sent from my ext4 Epic 4G running Bonsai4all 1.1.3!
sauron0101 said:
Here's a tear down of the Epic 4G:
http://www.chipworks.com/en/technic.../teardown-of-the-samsung-epic-4g-smart-phone/
Try asking a repair technician. The truth is, body repairs can be quite pricey - to the point where you might as well be getting a new phone in many cases.
Click to expand...
Click to collapse
I had TEP with my BB curve and I smashed it [was REALLLLLLY angry at my gf...she wasn't worth the BB :'( ] and I took it to a corporate store, and he fixed the screen in front of my face and I walked right out lol but that was a couple years ago
Sent from my SPH-D700 using XDA App
The phone still works, I just wouldn't want to look at pictures or watch videos on it since the color is all messed up. It's been about 2 weeks since the accident and it's still going! I just want to study this just for reference just in case it does go out. The replacement cost $60 on ebay, so I'd definitely do that, especially when I don't have insurance with Sprint (I think it still costs more than DIY) and I don't think Samsung fixes water damage through its warranty.
Oh well.
Thanks for the link! I'll check it out!
being a technician at an indirect sprint store, its a pain in the ass to separate the LED screen and the glass itself. the very best way to do it is either go to a 3rd party sprint store that has a full service(repair) center and either have them do an exchange if the tech is a nice guy (considering its water damage) or replace the part (which would be free as long as you have TEP). PM me with more questions if you have them
kzn said:
Has anyone done it before? There is a video on youtube, but it only goes as far as the keyboard. I'm looking to get to the LCD to fix/replace it because of discoloration from water damage. Anyone thinks it's possible?
Click to expand...
Click to collapse
Yeah, I've done it at least 20-30 times now. It's EXTREMELY difficult to get the lcd out and you'll more than likely end up breaking your phone.
br//0k3/n said:
Yeah, I've done it at least 20-30 times now. It's EXTREMELY difficult to get the lcd out and you'll more than likely end up breaking your phone.
Click to expand...
Click to collapse
Yea, you're definitely right about the LED itself. It's close to paper thin and made of a glass type material. it will break if you try to get it out. it's glued pretty good.
flawlessbmxr said:
Yea, you're definitely right about the LED itself. It's close to paper thin and made of a glass type material. it will break if you try to get it out. it's glued pretty good.
Click to expand...
Click to collapse
I took mine apart, lots of screws. Honestly the hardest part was removing the back cover that goes over the motherboard. I used a very small flathead to pry up underneath where the little notches are on the side. There's a lot of clip points and 2 of them at the battery are very hard to get off. Once that's off, the rest is cake. Separating the screen was a non-issue, as mine was already broken/cracked.
just to chim,e in on this ancient thread. i used a guitar pick instead of a flat head. i thought a metal screwdriver would scuff and mar up the plastic cover over the board.
Another protip: the notches on the second to last plastic cover serve a purpose -getting that back half to snap onto the phone is a huge pain in the ass, - i put a flathead into the slits and pushed down and snap snap snap snap motherboard cover was back in and my battery case didn't bulge.
kzn said:
Has anyone done it before? There is a video on youtube, but it only goes as far as the keyboard. I'm looking to get to the LCD to fix/replace it because of discoloration from water damage. Anyone thinks it's possible?
Click to expand...
Click to collapse
I've replaced my LED screen before by myself, took a few hours. This video helped me.
http://www.youtube.com/watch?v=IeO89VGAPuU
zvonkorp said:
I took mine apart, lots of screws. Honestly the hardest part was removing the back cover that goes over the motherboard. I used a very small flathead to pry up underneath where the little notches are on the side. There's a lot of clip points and 2 of them at the battery are very hard to get off. Once that's off, the rest is cake. Separating the screen was a non-issue, as mine was already broken/cracked.
Click to expand...
Click to collapse
Is there a water sensor inside the phone, I've always wondered if the battery was the only place
Sent from my SPH-D700 using Tapatalk
Edit: Solved! Read below
My SGS2 was sitting on a counter next to a lit candle. Someone blew out the candle and managed to get wax on the screen. I was able to get the wax off pretty easily but it left behind this residue that I cannot seem to get off, no matter how hard I try. When the screen is 100% clean you cannot see it. But after one wipe of your finger the smudges are blatantly noticeable and even have a texture to them.
I have tried everything from Windex to Goo-Gone and nothing works. At this point I'm thinking about treating it as a scratch and polishing the screen in an effort to remove the residue. I have looked at a few different techniques and I'm not sure which one to try.
I saw a thread on another forum mentioning using toothpaste and a paper towel to scrub the screen and polish it. I'd like to give this a try but I'm nervous about permanently damaging the glass by making it foggy.
Does anyone have any suggestions?
Thanks for any info!
SOLVED
Well after trying just about everything to get the wax residue off I finally resorted to what I feared the most, a razor blade. And much to my surprise it worked flawlessly. I held the razor blade at a 45 degree angle and just went to town scraping the screen. It was able to get underneath all the residue and any remnants of the wax. After scraping with the razor blade then wiping the screen with an alcohol wipe a few times my screen now looks and feels like it just came out of the packaging. And the razor blade didn't leave a single scratch on the screen.
What didn't work:
- Toothpaste and paper towel
- Alcohol wipes
- Dish soap and paper towel
- Damp paper towel heated in the microwave for up to 2 minutes
- 50/50 mixture of distilled white vinegar and water applied with paper towel
Tooth paste wont fog up your screen trust me i do it all the time. But what i do is use this spray you can buy at your local best buy called Monster
Sent From my Galaxy S II T-Mobile
Interesting.
I'll give it a try. Thanks!
sn0warmy said:
Interesting.
I'll give it a try. Thanks!
Click to expand...
Click to collapse
Let us know if Monster or the toothpaste works. This will be pretty interesting.
Sent from my SGH-T989 using xda premium
sn0warmy said:
Interesting.
I'll give it a try. Thanks!
Click to expand...
Click to collapse
If that don't work, get a wet paper towel/shammy cloth. Wet and microwave it for about a minute, then vigorously rub the screen with the heated cloth. This will remove the wax residue.
How about using a hair dryer to melt it first, or at least make it pliable enough to remove?
I think I'm going to try the wet/heated paper towel trick first. If that doesn't work I will resort to the toothpaste/paper towel.
If neither of these tactics work I will just drink beer.
I'm going to give this a shot when I get home from work in 45 minutes. I'll keep yuo guys posted.
sixfoot7 - I'm hesitant to take extreme heat to my phone. Especially since I do not want to melt the glue holding the screen to the bezel.
Thanks for the input.
Microfiber cloth usually one that comes with a screen protector. 90 % isopropyl alcohol and distilled water mixture. Should give the screen a good cleaning. I think you can use and tv screen cleaner as well. Monster brand cleaner.
You needed 90% iso alcohol
just try
Sent from my SGH-T989 using XDA App
Most degreasers like dishwashing soap should remove it. Strips car wax like magic
Sent from my SGH-T989 using XDA App
UPDATE
I gave the hot/wet paper towel trick a shot but it did nothing. I tried this like 5 times with no positive results.
So I wiped the hell out of the screen with toothpaste and paper towel. At first I thought it solved the problem but after I cleaned it all off and dried the screen it was clear that all I did was smear this crap onto a bigger portion of the screen. Now the entire bottom half of the screen feels like it has one of those glare-free screen protectors on it.
It's strange because you can't see it at all. It looks 100% fine. But it's almost sticky to the touch.
Tonight I will try using 90% iso alcohol, distilled water, and a microfiber towel.
We have some dish soap here in the office so I will give that a try right now.
After spending about 5 minutes rubbing dish soap on the screen with paper towel, I'm happy to post that this has been the best solution so far. It appears to have gotten rid of a lot of the residue left from the candle wax. However, here is still a little bit caked onto the screen.
Tonight I am going to give the alcohol/distilled water/micro fiber cloth a shot to remove the rest. I'll let you guys know how it turns out.
It really is crazy to me how difficult this process has been.
But one key takeaway that I think everyone should know is that after using the streak free dish soap, I'm finding it nearly impossible to leave any fingerprints or marks on the screen after using it. So for those plagued with finger prints and smudges on your screen, I recommend giving it a good scrub with some dish soap and you'll find that the screen will look spotless even after heavy use.
sn0warmy said:
After spending about 5 minutes rubbing dish soap on the screen with paper towel, I'm happy to post that this has been the best solution so far. It appears to have gotten rid of a lot of the residue left from the candle wax. However, here is still a little bit caked onto the screen.
Tonight I am going to give the alcohol/distilled water/micro fiber cloth a shot to remove the rest. I'll let you guys know how it turns out.
It really is crazy to me how difficult this process has been.
But one key takeaway that I think everyone should know is that after using the streak free dish soap, I'm finding it nearly impossible to leave any fingerprints or marks on the screen after using it. So for those plagued with finger prints and smudges on your screen, I recommend giving it a good scrub with some dish soap and you'll find that the screen will look spotless even after heavy use.
Click to expand...
Click to collapse
make sure you get a screen protector as well it could of been worse than what you had and actually damaged the screen.
I actually found some 80% iso alcohol wipes in the first aid kit here in the office. I wiped the screen with 3 of them until each of them were completely dry. This appears to have finally solved the problem.
Killbynature said:
make sure you get a screen protector as well it could of been worse than what you had and actually damaged the screen.
Click to expand...
Click to collapse
Yeah, I've never been a fan of screen protectors but after this nightmare I'll be picking one up tonight.
Just thought I'd add that it's standard practice to remove things from glass with a razor blade. One of those standard flat ones. Razor blades work for removing stickers from windows or mirrors and any other crud or buildup. They work quick and very well. Also, they don't scrach the glass unless you hold them at 90 degrees and scrape.
AdamOutler said:
Just thought I'd add that it's standard practice to remove things from glass with a razor blade. One of those standard flat ones. Razor blades work for removing stickers from windows or mirrors and any other crud or buildup. They work quick and very well. Also, they don't scrach the glass unless you hold them at 90 degrees and scrape.
Click to expand...
Click to collapse
I know this is true for standard glass. I used a razor blade to remove the tint from the windows of one of my cars and it worked well without showing any scratches.
But is the Gorilla Glass true "glass"?
UPDATE
Well now that the phone has been sitting for a bit, I went to use it again and the screen is back to having a sticky feel to it! Now the texture is just more spread out across the screen. I am truly stumped at this point. I am close to shelling out for a damn screen replacement.
Final update: the razor blade did the trick. I have updated the OP with the solution and the tactics that failed in hopes that it might help someone with similar issues down the road.
Learned. Thanks.
Not sure if we have an oleophobic coating on our screens, but any alcohol solution would remove that coating. I would avoid putting alcohol on the screen as well as ammonia based solutions such as Windex. Just a heads up.
Sent from my SGH-T989 using xda premium
Pretty much all you need in the title. I wanted to know how to do this mainly because it's cheaper then buying a lCD digitizer combo and because I can't find a guide anywhere else. Any tips and tricks on how to do this should be well appreciated and any guides. Thanks in andVance for anyone's help.
Sent from my SAMSUNG-SGH-I747 using xda premium
Backslash10 said:
Pretty much all you need in the title. I wanted to know how to do this mainly because it's cheaper then buying a lCD digitizer combo and because I can't find a guide anywhere else. Any tips and tricks on how to do this should be well appreciated and any guides. Thanks in andVance for anyone's help.
Sent from my SAMSUNG-SGH-I747 using xda premium
Click to expand...
Click to collapse
I also have a cracked the screen, What my search result has come up with is the cost to replace the screen is ~$200CDN. Can you please keep me posted on what path you would be taking, might just follow
Replacing the glass from the actual screen is very hard and would require tons of technical know-how because the two are fused together.
Not recommended, even by experts.
Well I know it's extremely hard but I'm mainly looking for advise about it is all it decently help people out here.
Sent from my SAMSUNG-SGH-I747 using xda premium
Backslash10 said:
Well I know it's extremely hard but I'm mainly looking for advise about it is all it decently help people out here.
Sent from my SAMSUNG-SGH-I747 using xda premium
Click to expand...
Click to collapse
it's not possible to do. period.
Really I thought I could be done but took a lot of waiting and just the right heat and pressure.
Sent from my SAMSUNG-SGH-I747 using xda premium
dLo GSR said:
it's not possible to do. period.
Click to expand...
Click to collapse
Nice
Op
http://forum.xda-developers.com/showthread.php?t=1904554
it is very possible I have done 4 of them already...
http://forum.xda-developers.com/showthread.php?t=1890708
dLo GSR said:
it's not possible to do. period.
Click to expand...
Click to collapse
hahahah.....owned, should really atleast attempt to find out if what you are saying has any evidence to support it, or rebut it
dLo GSR said:
it's not possible to do. period.
Click to expand...
Click to collapse
I've heard its possible, just EXTREMELY difficult to manage.. I wouldn't.
Its entirely possible, as the multiple video's have shown. Although i haven't done it to the SGS3 yet, i will be soon. Cracked my lens the other day, replacement in the mail. I have also changed the screen's on several iphones (at my job) which us a similar method of gluing. It is made to be difficult by design...to keep people from attempting it and opting to send it in for repair. Of course when you do this, through samsung anyways, you are being charged for the entire led assembly and not just the lens.
dntesinfrno said:
Its entirely possible, as the multiple video's have shown. Although i haven't done it to the SGS3 yet, i will be soon. Cracked my lens the other day, replacement in the mail. I have also changed the screen's on several iphones (at my job) which us a similar method of gluing. It is made to be difficult by design...to keep people from attempting it and opting to send it in for repair. Of course when you do this, through samsung anyways, you are being charged for the entire led assembly and not just the lens.
Click to expand...
Click to collapse
Good to hear you did it at your job with iphones. Any idea what glue they use to bond the glass to the digitizer? I have searched and searched and cannot find anything. I have done several S3 so far and this is the one ingredient lacking for a complete repair. In terms of what it feels like while removing the old glue; it seems to be silicone based the way it comes up, you can roll it into little balls, it's is tacky and has that rubbery consistency.
Unfortunately, no idea what adhesive they use. Personally i would attempt what YellowGTO did first and simply heat the existing glue and see how it holds. Normally this should be enough to do the job, as you can imagine the stuff if pretty tacky. Especially if the lens fits as tightly as his in the video, its doubtful it will fall out even with the slightest remaining glue. If for whatever reason there isn't enough to firmly hold the screen in place i've used small dabs of liquid tape where necessary, or the thin 3M double sided tape would work also i suppose. In this case i usually wrap the device in a towel or shirt or whatever you have laying around and set something with some decent weight on top of it, screen side down on a flat surface, overnight to give the adhesive time to setup properly.
dntesinfrno said:
Unfortunately, no idea what adhesive they use. Personally i would attempt what YellowGTO did first and simply heat the existing glue and see how it holds. Normally this should be enough to do the job, as you can imagine the stuff if pretty tacky. Especially if the lens fits as tightly as his in the video, its doubtful it will fall out even with the slightest remaining glue. If for whatever reason there isn't enough to firmly hold the screen in place i've used small dabs of liquid tape where necessary, or the thin 3M double sided tape would work also i suppose. In this case i usually wrap the device in a towel or shirt or whatever you have laying around and set something with some decent weight on top of it, screen side down on a flat surface, overnight to give the adhesive time to setup properly.
Click to expand...
Click to collapse
Sure the outer frame is enough in most cases to hold it on, thats fine. But there is a side effect once all the glue is removed off the digitizer. There will a micro gap between the 2 when the original glue is removed. If you press the new glass hard enough, ( for example cleaning fingerprints like I often do against my shirt ) and it touches the digitizer, the phone freezes. You must then power off the screen, sleep button and then press power again to bring it up and then it will work again. Seems to be a recalibration process going on.
Maybe these 2 posts should be merged and I would certainly read the post below. Much more good info here on the subject...
http://forum.xda-developers.com/showthread.php?p=33056057#post33056057
Yea, i've been following several threads about lens replacement, even before i busted mine (jinxed myself?). I'd much rather have to deal with a 15 second reboot over possibly damaging the LED or worse using an adhesive that may not be transparent. I can live with the air gap, or even the 'invisible' smudges on my personal device...although if i were going to do this for profit obviously that would be unacceptable. 20 dollars and an hour of my time vs 200+ for the whole assembly or 125 for an insurance deductable..i can overlook imprefections . It would be interesting to find out exactly what substance they are using though.
EDIT - Just for SnG's i googled 'mobile screen glue' and this was the first result. http://www.alibaba.com/product-gs/523467689/Optical_Clear_Adhesive_for_touch_screen.html?s=p
While i'm sure its not the only product out there for this purpose, if this is any indication it won't come cheap..
dntesinfrno said:
Yea, i've been following several threads about lens replacement, even before i busted mine (jinxed myself?). I'd much rather have to deal with a 15 second reboot over possibly damaging the LED or worse using an adhesive that may not be transparent. I can live with the air gap, or even the 'invisible' smudges on my personal device...although if i were going to do this for profit obviously that would be unacceptable. 20 dollars and an hour of my time vs 200+ for the whole assembly or 125 for an insurance deductable..i can overlook imprefections . It would be interesting to find out exactly what substance they are using though.
Click to expand...
Click to collapse
Agreed it would be nice to find out what type of glue.
The phone breaks so easy i am surprised I have not heard of a Class Action Lawsuit... :silly:
here are instructions on replacing just the glass/screen
[HOW TO] [TUTORIAL] S3 Replace Cracked Glass Screen w/ YouTube Video
i replaced my screen took me about 50 mins with 2 people
XeoNoX said:
here are instructions on replacing just the glass/screen
[HOW TO] [TUTORIAL] S3 Replace Cracked Glass Screen w/ YouTube Video
i replaced my screen took me about 50 mins with 2 people
Click to expand...
Click to collapse
Very very nice!! :thumbup::thumbup:
Sent from my SCH-I535 using xda app-developers app
marcustaz said:
Very very nice!! :thumbup::thumbup:
Sent from my SCH-I535 using xda app-developers app
Click to expand...
Click to collapse
JUst did an even EASIER replacement for a cracked camera lens. I purchased this part from ebay :
http://www.ebay.com/itm/Blue-Housin.../271099346918?ssPageName=ADME:L:eek:C:US:3160
1) Turn phone off
2) Take off battery cover
3) Remove battery, SIM card, and SD Card
4) remove about 8 screws to remove the middle back place.
5) Remove middle back place carefully (There are still tabs holding it secure)
6) Place new middle back in place
7) Screw down
8) Replace battery, SIM card, and SD card
9) Replace battery cover
10) Power up phone!!
Took all of 10 minutes total. Flawless fix on my AT&T Samsung Galaxy S 3
Gentlemen and OP please update your original post to include this video. This is NOT to promote myself but from all the comments and feedback everyone has stated it is the most detailed and informative on You Tube on the glass replacement procedure. I also have separate videos on shattered glass replacement. Thanks and good luck.
Ok everybody, the purpose of this thread is to dispel the MYTH that you can not replace just the front glass. Good news for my brethren who as I, have learned that Gorilla Glass hardly deserves the moniker.
My phone was dropped from a height of less than three feet with a Speck Candyshell case installed and the screen cracked. Luckily the digitizer and SAMOLED were still fully functioning. I wondered if there was a way to replace just the glass. If you take the time to google Galaxy S3 replacement glass, you will find a mixture of threads on the subject with most saying that only a professional could do so. There are a few youtube videos on the matter, including one proclaiming that it is impossible to separate and replace only the outer glass without destroying the digitizer. This simply is NOT true. Not less than one hour ago I did exactly that.
Supplies:
Replacement Glass (Can be found for less than twenty dollars complete with a plastic separator, phillips screwdriver, and 3m tape cut fit.)
Hair Dryer
Painter's Tape (Or any semi-sticky tape that won't leave residue)
Gloves
Small Flathead Screwdriver
What I did:
First I removed the back cover and battery from the GS3. I went into my small bathroom and misted it with a spray bottle in hopes that it would reduce the dust in the air. I set my wife's hair dryer to high heat and low speed. I heated the bottom corner of my phone first because there was a small chip that looked like it would be a good place to start prying the screen off. I used the small flathead to start the prying because the provided plastic separator was not sturdy enough to initiate this. You don't have to worry about scratching the display during this step because there is that nice gap between the display and the actual bottom of the phone as well as the top. So either of these two places would be an ideal starting point. As you SLOWLY pry the screen up you will notice a small gap of air forming between the glass and the display. As soon as the screen is just high enough to fit a plastic separator between the glass and display, do it. I can not stress enough, go sloooowwwww. If you do not remove the glass strategically and smoothly you will cause scratches or cracks in the SAMOLED glass (The actual display). Pry from the largest shards first. Once the screen was high enough for the separator I applied a lot of heat again, and especially focusing on the gap so more heat would reach the glue directly. Heat, pry, heat, pry, heat, pry. When the glass is almost separated resist the urge to speed up, it was hard for me too... It is OK if the original glass cracks a little more as you remove it, when this happens change spots where you are prying. The glass should come off as one sheet held by the glue and colored portions. Undoubtedly you will find tiny shards and perhaps a fleck or two of dust. This is where the painter's tape comes in. Use the tape to remove any debris off of the SAMOLED screen. Do not touch the actual display, not even with gloves. This will smudge what is left of the original adhesive and will lead to annoying marks under your glass after the process. I am not sure of a good solvent that would not damage the screen or I would have used it, mine has a few smudges under it. However, they are only visible when the screen is off. I then took the 3m tape provided with my glass and applied it to the two appropriate places on the phone. Next, I removed the backing off of the new glass and carefully applied it from the top to the bottom. I had to use my screw driver to keep the capacitive button ribbons under the new glass in their proper positions. Once the glass was on the phone I heated it all up one more time to make the leftover glue and the new adhesive softer. Then I applied firm pressure around the circumference of the phone only. I let my phone cool down and then replaced the battery and cover. Finally I turned my phone back on and enjoyed all the glory of my achievement when EVERY aspect of my phone was fully functional. My phone is now a hybrid pblue/white because for whatever reason the white glass was eight dollars cheaper than the blue glass. In my opinion, it looks great.
Ps For this operation the provided phillips screwdriver is not needed.
A couple of photos...
The original cracked blue glass after removal.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
My new hybrid phone.
The screen on and app drawer open to show that the touch still works.
It was brought to my attention that I may want to add a disclaimer.
Disclaimer: You could f*c* up your phone even more than it it already is if you do something hastily or fail to adapt your methods to a situation different than mine. All of the above as well as 99.9999 percent of f*c* ups in the universe are not my fault.
johnyardavid said:
Ok everybody, the purpose of this thread is to dispel the MYTH that you can not replace just the front glass. Good news for my brethren who as I, have learned that Gorilla Glass hardly deserves the moniker.
My phone was dropped from a height of less than three feet with a Speck Candyshell case installed and the screen cracked. Luckily the digitizer and SAMOLED were still fully functioning. I wondered if there was a way to replace just the glass. If you take the time to google Galaxy S3 replacement glass, you will find a mixture of threads on the subject with most saying that only a professional could do so. There are a few youtube videos on the matter, including one proclaiming that it is impossible to separate and replace only the outer glass without destroying the digitizer. This simply is NOT true. Not less than one hour ago I did exactly that.
Supplies:
Replacement Glass (Can be found for less than twenty dollars complete with a plastic separator, phillips screwdriver, and 3m tape cut fit.)
Hair Dryer
Painter's Tape (Or any semi-sticky tape that won't leave residue)
Gloves
Small Flathead Screwdriver
What I did:
First I removed the back cover and battery from the GS3. I went into my small bathroom and misted it with a spray bottle in hopes that it would reduce the dust in the air. I set my wife's hair dryer to high heat and low speed. I heated the bottom corner of my phone first because there was a small chip that looked like it would be a good place to start prying the screen off. I used the small flathead to start the prying because the provided plastic separator was not sturdy enough to initiate this. You don't have to worry about scratching the display during this step because there is that nice gap between the display and the actual bottom of the phone as well as the top. So either of these two places would be an ideal starting point. As you SLOWLY pry the screen up you will notice a small gap of air forming between the glass and the display. As soon as the screen is just high enough to fit a plastic separator between the glass and display, do it. I can not stress enough, go sloooowwwww. If you do not remove the glass strategically and smoothly you will cause scratches or cracks in the SAMOLED glass (The actual display). Pry from the largest shards first. Once the screen was high enough for the separator I applied a lot of heat again, and especially focusing on the gap so more heat would reach the glue directly. Heat, pry, heat, pry, heat, pry. When the glass is almost separated resist the urge to speed up, it was hard for me too... It is OK if the original glass cracks a little more as you remove it, when this happens change spots where you are prying. The glass should come off as one sheet held by the glue and colored portions. Undoubtedly you will find tiny shards and perhaps a fleck or two of dust. This is where the painter's tape comes in. Use the tape to remove any debris off of the SAMOLED screen. Do not touch the actual display, not even with gloves. This will smudge what is left of the original adhesive and will lead to annoying marks under your glass after the process. I am not sure of a good solvent that would not damage the screen or I would have used it, mine has a few smudges under it. However, they are only visible when the screen is off. I then took the 3m tape provided with my glass and applied it to the two appropriate places on the phone. Next, I removed the backing off of the new glass and carefully applied it from the top to the bottom. I had to use my screw driver to keep the capacitive button ribbons under the new glass in their proper positions. Once the glass was on the phone I heated it all up one more time to make the leftover glue and the new adhesive softer. Then I applied firm pressure around the circumference of the phone only. I let my phone cool down and then replaced the battery and cover. Finally I turned my phone back on and enjoyed all the glory of my achievement when EVERY aspect of my phone was fully functional. My phone is now a hybrid pblue/white because for whatever reason the white glass was eight dollars cheaper than the blue glass. In my opinion, it looks great.
Ps For this operation the provided phillips screwdriver is not needed.
A couple of photos...
The original cracked blue glass after removal.
View attachment 1332282
My new hybrid phone.
View attachment 1332284
View attachment 1332283
The screen on and app drawer open to show that the touch still works.
View attachment 1332285
Click to expand...
Click to collapse
You should do a video tutorial and post in on youtube. Find someone with a cracked screen and offer to help. You will help many people and have tonnes of views
Wond3r said:
You should do a video tutorial and post in on youtube. Find someone with a cracked screen and offer to help. You will help many people and have tonnes of views
Click to expand...
Click to collapse
Also many people will not have the OP's patience and screw up in the process.
Sent from my Pebble Blue GS3 on Tapatalk 2
Not much patience required, it only took me thirty minutes total. I just wanted to emphasize not rushing. That's a good idea for a tutorial video....... I am down.
Sent from my SAMSUNG-SGH-I747 using xda premium
johnyardavid said:
Not much patience required, it only took me thirty minutes total. I just wanted to emphasize not rushing. That's a good idea for a tutorial video....... I am down.
Sent from my SAMSUNG-SGH-I747 using xda premium
Click to expand...
Click to collapse
This is awesome, and great tutorial. Just saying sooommmee noob out there is gonna crack their screen and blame you so make sure you add a disclaimer.
Sent from my Pebble Blue GS3 on Tapatalk 2
Toaster Strudels said:
This is awesome, and great tutorial. Just saying sooommmee noob out there is gonna crack their screen and blame you so make sure you add a disclaimer.
Sent from my Pebble Blue GS3 on Tapatalk 2
Click to expand...
Click to collapse
Duly noted, thank you
Sent from my SAMSUNG-SGH-I747 using xda premium
Toaster Strudels said:
This is awesome, and great tutorial. Just saying sooommmee noob out there is gonna crack their screen and blame you so make sure you add a disclaimer.
Sent from my Pebble Blue GS3 on Tapatalk 2
Click to expand...
Click to collapse
Happens with ANY tutorial really. People are still bricking their s3s. People are still flashing ROMs for the international version on our phones lol
If you lived closer to the northeast Texas area, I'd pay you to do that to my phone lol
My phoen cracked in similar fashion about 3 weeks ago.
I priced aorund and the fix around my area was 350 bucks to replace the entire screen,
I ended up spending 150 bucks more and bought it new again.
Had I known this then i would have def tried it.
Dude start a business!!! I break my **** all the time
Sent from my SAMSUNG-SGH-I747 using xda premium
I am up for replacing one to make a tutorial video. However, that would require trust on the part of the sender. Of course I would return the phone, because well, that would just be f***ed up. So, here is my offer; if anyone out there has a phone with cracked glass but fully functioning touch and display, send it to me minus the sim card, with the replacement glass, 3m tape, and the plastic separator. I will use your phone to make a tutorial video, and then ship it back to you with the couple of bucks you will provide for return shipping. If anyone is interested, pm me.
Disclaimer on this: Worst case scenario the SAMOLED will break and you will have to replace the screen/digitizer combo like originally. Likewise, I will not accept liability for any other damage to the phone, though I would take the utmost care with your device and do not expect to damage it in any way.
If nobody is interested, that is fine and I understand. However, this is not for my gain as my device is already fixed and functional. Also, the repair will be done within a week of receiving the phone so do not expect it to be returned as soon as I receive it. I am a more than full time mechanical engineering student and I have a pretty busy schedule.
Side thought: I wonder why all of the phone repair professionals say that this process is near impossible unless you are a professional like they are? For instance, this guy http://www.youtube.com/watch?v=es8gezSdKv4&feature=youtu.be . I am in no way a professional phone repairman and I typically lack finesse. Yet, this was pretty simple to me...
johnyardavid said:
I am up for replacing one to make a tutorial video. However, that would require trust on the part of the sender. Of course I would return the phone, because well, that would just be f***ed up. So, here is my offer; if anyone out there has a phone with cracked glass but fully functioning touch and display, send it to me minus the sim card, with the replacement glass, 3m tape, and the plastic separator. I will use your phone to make a tutorial video, and then ship it back to you with the couple of bucks you will provide for return shipping. If anyone is interested, pm me.
Disclaimer on this: Worst case scenario the SAMOLED will break and you will have to replace the screen/digitizer combo like originally. Likewise, I will not accept liability for any other damage to the phone, though I would take the utmost care with your device and do not expect to damage it in any way.
If nobody is interested, that is fine and I understand. However, this is not for my gain as my device is already fixed and functional. Also, the repair will be done within a week of receiving the phone so do not expect it to be returned as soon as I receive it. I am a more than full time mechanical engineering student and I have a pretty busy schedule.
Side thought: I wonder why all of the phone repair professionals say that this process is near impossible unless you are a professional like they are? For instance, this guy http://www.youtube.com/watch?v=es8gezSdKv4&feature=youtu.be . I am in no way a professional phone repairman and I typically lack finesse. Yet, this was pretty simple to me...
Click to expand...
Click to collapse
And apart from asking on here, maybe you should put up an ad on your local kijiji/craigslist as well! You can make a couple bucks off it plus use it for a tutorial
Anyway we can get a link to the exact screen u bought
sent from 1 of 4 Galaxy devices
It was this one.
http://www.ebay.com/itm/16086785670...eName=STRK:MEWNX:IT&_trksid=p3984.m1497.l2649
Sent from my SAMSUNG-SGH-I747 using xda premium
Thanks
sent from 1 of 4 Galaxy devices
Great thread. I haven't had to deal with a cracked screen (thank goodness) but kudos to you for going out on a limb and trying something others said wasn't possible. Much appreciated that you posted up pictures and a walkthrough for this.
Saw this super cheap sgs3 on Craig list might try and fix it to sell it.
Sent from my SAMSUNG-SGH-I747 using xda premium
waiters said:
Saw this super cheap sgs3 on Craig list might try and fix it to sell it.
Sent from my SAMSUNG-SGH-I747 using xda premium
Click to expand...
Click to collapse
Sounds like a good idea.
Thanks dude!
Sent from my SAMSUNG-SGH-I747 using xda premium
johnyardavid said:
It was this one.
http://www.ebay.com/itm/16086785670...eName=STRK:MEWNX:IT&_trksid=p3984.m1497.l2649
Sent from my SAMSUNG-SGH-I747 using xda premium
Click to expand...
Click to collapse
Can you confirm that this should also fit on an I747 (Telus, Rogers, Bell, AT&T) version of the SIII?
Sent from my SGH-I747 using xda premium
---------- Post added at 07:25 AM ---------- Previous post was at 07:14 AM ----------
johnyardavid said:
Sounds like a good idea.
Click to expand...
Click to collapse
I would so love a video tutorial. I would be willing to send in my phone, however I can't part with my phone for a long period of time..
Sent from my SGH-I747 using xda premium
I shattered my screen a few weeks ago and had great results replacing just the glass, not the digitizer, however I have a small problem. I didn't realize the adhesive was still on the LCD, I kind of ruined it along the left side of my phone, it doesn't stick properly, kind of looks like a bad screen protector. I have to keep pushing it down to get rid of the haze. What I'm wondering is, can I remove the adhesive all together and just replace the sticker bit along the border of the glass, so there's no adhesive between the glass and LCD without it affecting the performance of the touch screen? It works great as is, the haze is just annoying me.
Any help would be greatly appreciated, I'd hate to do it and lose the ability to use my phone
Sent from my Samsung Galaxy Note II using Xparent Purple Tapatalk 2
May i ask how you replaced the glass, and where you bought it? Shattered mine couple of days ago...
Ghetto_Cowgirl said:
I shattered my screen a few weeks ago and had great results replacing just the glass, not the digitizer, however I have a small problem. I didn't realize the adhesive was still on the LCD, I kind of ruined it along the left side of my phone, it doesn't stick properly, kind of looks like a bad screen protector. I have to keep pushing it down to get rid of the haze. What I'm wondering is, can I remove the adhesive all together and just replace the sticker bit along the border of the glass, so there's no adhesive between the glass and LCD without it affecting the performance of the touch screen? It works great as is, the haze is just annoying me.
Any help would be greatly appreciated, I'd hate to do it and lose the ability to use my phone
Sent from my Samsung Galaxy Note II using Xparent Purple Tapatalk 2
Click to expand...
Click to collapse
My English is not my native language, but considering the word adhesive, you must referring to the double side tape part that holds the digitizer and the glass together.
Assuming that, from my own experience it is a no-go. If you are experiencing sticking parts (ie. it's not properly glued) I am afraid you might have to replace the whole adhesive.
I had the same issue on my Desire HD and about 1 month after replacement, same as you kept pushing it to take the haze away, the inevitable happened. A tiny opening not being able to see with the naked eye, left enough room for dust to enter under the glass. One month later, there was so much dust in it that I had to buy a new full screen.
However, months later, I tried some old trick for future experiments You can eventually take a paint dryer, and try to heat up the lose part then applying some light pressure onit. This process should make the glue on the adhesive very soft and with a bit of luck it might stick on the glass.
I'd say perhaps 60-70 degrees. Don't worry, even 100 degrees won't break your screen unless u're heating it up for more than 10 minutes or so
GL
Fantastic, I'll give heat a try to get it to stick. Unfortunately I can't find the double sided tape anywhere otherwise I'd replace it. I'm in Australia so shipping is pretty expensive from most places outside of the country. I really appreciate the reply
I bought the glass alone off eBay, I believe it was around $30. To replace it took a lot of patience, a hairdryer on low for 15 mins to heat the glue up, finding a spot to slowly pry the glass away from the LCD. As I said, a lot of patience and a lot of mess since my screen was badly cracked and kept breaking off. Was worth it to save $300 though. Figured I could do it for $30 myself and if it broke I'd have had to of paid for both either way
Sent from my Samsung Galaxy Note II using Xparent Purple Tapatalk 2
It seems you already build enough experience with heating up the device. I hope it does the trick for you. On the other hand the adhesive itself shouldn't be much of a problem. They are not made by Samsung itself and if it's not working and still refuse to buy a new glass, I'd just go to a repair shop as I did here in the Netherlands and ask the repair guy to order it. It shouldn't cost more than a few bucks. On top of that just google "note 2 screen adhesive" and look at some amazon/ebay hits, just take that picture/info to the repair guy as a reference to know what to order
matzone said:
It seems you already build enough experience with heating up the device. I hope it does the trick for you. On the other hand the adhesive itself shouldn't be much of a problem. They are not made by Samsung itself and if it's not working and still refuse to buy a new glass, I'd just go to a repair shop as I did here in the Netherlands and ask the repair guy to order it. It shouldn't cost more than a few bucks. On top of that just google "note 2 screen adhesive" and look at some amazon/ebay hits, just take that picture/info to the repair guy as a reference to know what to order
Click to expand...
Click to collapse
Im from the netherlands too, which shops do you recommend? I bought my phone at coolblue, but I dont want to lose my phone for 2 weeks with repair..
Sent from my GT-N7100 using xda app-developers app
Ghetto_Cowgirl said:
I shattered my screen a few weeks ago and had great results replacing just the glass, not the digitizer, however I have a small problem. I didn't realize the adhesive was still on the LCD, I kind of ruined it along the left side of my phone, it doesn't stick properly, kind of looks like a bad screen protector. I have to keep pushing it down to get rid of the haze. What I'm wondering is, can I remove the adhesive all together and just replace the sticker bit along the border of the glass, so there's no adhesive between the glass and LCD without it affecting the performance of the touch screen? It works great as is, the haze is just annoying me.
Any help would be greatly appreciated, I'd hate to do it and lose the ability to use my phone
Sent from my Samsung Galaxy Note II using Xparent Purple Tapatalk 2
Click to expand...
Click to collapse
Check out the link in my signature. You'll find what you're looking for with regards to the adhesive.
Sent from my GT-N7100 using xda premium