Hi,
My XDA1/T-Mobile PPC is on the XDA Developers SER 1.2 ROM and it has utility wherein I can change GSM mode from GSM900 to GSM 900/1800 to GSM 1900. I recently upgraded through the T-Mobile WM2003 ROM and Radio exe file. Now, I wish to have that utitlity again becuase now I am in asia and it is practical to have the GSM 900/1800. But I am also been goind to the US from time to time so I don't want to lose the 1900 BAnd. Is there a utility somewhere where I can change band?
I saw somewhere that I can change band via the bootloader: I am not familiar with the bootloader can somebody tell me how to change my band to 900/1800? Is it easy if I want the 1900 band back beacuse I'll be going to the states in a months time, and after that I will be back in Asia again (so I have to change to 900/1800 again). Pls help. Thanks.
BTW my device information is as follows:
Hardware Ver. PW10B1
ROM: 4.01.16 ENG
Radio: 6.25.02
try changing which rom you have, maybe that will change the band
Changing Bands
Try,
:arrow: http://wiki.xda-developers.com/wiki/ChangingBandsWithBootloader
Hi,
If your device is B type, that means it's 900/1900 MHz (plz refer to the rear sticker and don't rely on the device info data!) ... so, in Asia you are stuck with 900 MHz ... anyway, changing the band from the bootloader is not that safe action ... some times it make the xda hang a need a many hard reset actions to get back.
I would advice you to get XDA II which is tri-band by design.
The latest official US T-Mobile ROM v4.01.16 still allows the bands to be switched within the OS, whereas with the latest official US ATT ROM vA.30.09 said to be able to switch automatically.
Thanks for the replies. So it is not recommended to switch bands with bootloader?
reydiodj: What do you mean by switching bands within OS? Does that mean I can still get 18000 frequencies?[/b]
thanks for the replies. No need for me to change the band, my device already works perfectly now.
Please
I need XXJPH
without csc
to keep my 850mhz
If anyone can do for us?
From already thank you very much
*#*#4636#*#* click phone info, click menu button and select select radio band and finally select usa band (that will enable 850 and 1900 for both edge and 3g) or automatic.
Worked fine for me but eventually a CSC file will come out.
decepticon said:
*#*#4636#*#* click phone info, click menu button and select select radio band and finally select usa band (that will enable 850 and 1900 for both edge and 3g) or automatic.
Worked fine for me but eventually a CSC file will come out.
Click to expand...
Click to collapse
It does not work for me only works 1900MHz
and if I put another csc
gives me error
criskelo said:
It does not work for me only works 1900MHz
and if I put another csc
gives me error
Click to expand...
Click to collapse
May want to go back to 2.1 until a proper 2.2 build comes out with the proper CSC then if you are in a predominately 850 coverage area.
I am sure once the leaks start coming out for different regions we will get them.
I had the same problem on the i9000T.
The 850Mhz got disabled with JPH.
I flashed back to an official 2.1, updated CSC and got 850Mhz back.
Then flashed JPH back and retained 850Mhz.
clubtech said:
I had the same problem on the i9000T.
The 850Mhz got disabled with JPH.
I flashed back to an official 2.1, updated CSC and got 850Mhz back.
Then flashed JPH back and retained 850Mhz.
Click to expand...
Click to collapse
Where did you get your ROM at that gave you back the 850mhz? Can you post up the ROM so we can use it? My original i9000T ROM backup got messed up somehow.
Thanks!
Jouten said:
Where did you get your ROM at that gave you back the 850mhz? Can you post up the ROM so we can use it? My original i9000T ROM backup got messed up somehow.
Thanks!
Click to expand...
Click to collapse
Download firmware Canada 850mhz
http://www.samfirmware.com/WEBPROTECT-i9000.htm
criskelo said:
Download firmware Canada 850mhz
http://www.samfirmware.com/WEBPROTECT-i9000.htm
Click to expand...
Click to collapse
does the jph have spanish in swype? i was almost sure it did not (i ask cause you are from argentina, just like me )
EDIT: ok, maybe JP6 was the one without spanish in swype
Criskelo, I have an GT-i9000T, that lost 850 Band.
I flash with the Canada firmware, from WEBPROTECT.
pda:i9000ugjh2
phone i9000ugjh2
csc i9000bmcjh2
but i cant connect with movistar in hsdpa 850mhz. Only Edge
? whick may be the problem ?
Thanks
Here we are, I post the european config files for 850 / 1900 / 2100 network
You can use it on the RUTEM_U3_01.14.2 last deblured rom.
All you have to do is replace the folder in etc/system/
ATT
will those files work on ATT because of the 1900 and 850, or would I need the exact ATT version?
Yep , normaly they will work on ATT network, except for 2100 who is not present on your network. give a try.
If these files don't work , the best thing to do is reflash the original ATT rom or if you didn't change in your original rom,
and backup the frequency folder /etc/motorola/"bp_nvm_default" .
To do this you will need to room your device and pick up the folder with rootexplorer.
but normaly you won't have to do that because of the similar freQ
great!
ok, Ill try this with the newer de-blurred rom, because I can't seem to find the original att rom anywhere, hopefully this unbricks the phone!
nixonpjoshua said:
ok, Ill try this with the newer de-blurred rom, because I can't seem to find the original att rom anywhere, hopefully this unbricks the phone!
Click to expand...
Click to collapse
Here it is:
http://www.megaupload.com/?d=DIDRJSZ1
Please report us EVERYTHING on your AT&T Flipout.
Did you manage to unblur it?
Did you brick it? With which ROM?
Have you tried the modified recovery?
Best Regards.
Is there SBF available for the Rogers Canada branded Flipout?
Sent from my DROID2 GLOBAL
Does anybody have config files for British retail Flipout?
I've flashed RUTHEM_U3_01.14.2(Debranded ROM for Central Europe) which seems to work great, but I have some issues with signal reception I didn't have with the original ROM. I assume the reason is in band configuration, according to and-developers.com, my original ROM used 900/2100 and the new one uses 850/2100. Standard for my region is GSM 900, DCS 1800, UMTS 2100.
Thank you in advance.
GSM 900/2100 Configuration Files
I managed to get these files myself, so if you have UK retail Flipout and you encountered signal reception issues after flashing RUTEM_U3_01.14.2, these configs might help.
question
I from argentina , bands here according to http://www.mobileworldlive.com/maps/network.php?cid=3206&cname=Argentina
are 850/1900, but when i see for example france i found http://www.mobileworldlive.com/maps/network.php?cid=123&cname=France
i found it has 900/1800/2100, can i install U3_01.14.2 with the 850/1900/2100 config file??
thanks for your answeres
dalkor said:
I managed to get these files myself, so if you have UK retail Flipout and you encountered signal reception issues after flashing RUTEM_U3_01.14.2, these configs might help.
Click to expand...
Click to collapse
Thanks for these.
Where did you find them by the way and also are these from the latest uk rom?
Nice one
Acefx said:
Here we are, I post the european config files for 850 / 1900 / 2100 network
You can use it on the RUTEM_U3_01.14.2 last deblured rom.
All you have to do is replace the folder in etc/system/
Click to expand...
Click to collapse
hi,
I just installed RUTEM_U3_01.14.2 and would like to make it support 1900 network too with your conf files, however I can't find any /etc/system folder in my phone, only /System/etc but no bp_nvm folder inside
Where do I put your files ?
UPDATE:
found: /system/etc/motorola/bp_nvm_default/
Waiting for confirmation that this works with ATT...please let me know when someone finds out
dalkor said:
Does anybody have config files for British retail Flipout?
I've flashed RUTHEM_U3_01.14.2(Debranded ROM for Central Europe) which seems to work great, but I have some issues with signal reception I didn't have with the original ROM. I assume the reason is in band configuration, according to and-developers.com, my original ROM used 900/2100 and the new one uses 850/2100. Standard for my region is GSM 900, DCS 1800, UMTS 2100.
Thank you in advance.
Click to expand...
Click to collapse
I noticed the exact same thing, I have a European 900/2100 phone I'm using in Canada. My provider is 1900, so I never had 3G to begin with, but after flashing 1.14.2 my 2G reception weakened and EDGE turned to GPRS. I scared myself enough getting stuck at the Moto screen playing with basebands the first time, I think I'll wait a bit more before I go in for round two
suoko - Did copying these config files over improve 1900 signal? Did you have connectivity at all before, or was it just 2G, but after copying these new config files it is 3G?
kiwikonnections said:
suoko - Did copying these config files over improve 1900 signal? Did you have connectivity at all before, or was it just 2G, but after copying these new config files it is 3G?
Click to expand...
Click to collapse
my network uses 2100 only so 3g worked without modifications. I did this just in case I sell the phone
Hi
I can't fint the folder /etc/system... I looked into /system/etc, but I don't have a folder named GSM...
Suggestion? How can I check if the modded file are working?
Edit:
I'm very sorry! I missed the edit just three posts before mine... I got it!
MGA2009 said:
Here it is:
http://www.megaupload.com/?d=DIDRJSZ1
Please report us EVERYTHING on your AT&T Flipout.
Did you manage to unblur it?
Did you brick it? With which ROM?
Have you tried the modified recovery?
Best Regards.
Click to expand...
Click to collapse
Are you still keeping this file? Can you upload it to another site?
Thanks
Hi All,
I want a 32GB version of the m8, saw US t-mobile version which the following bands:
2G NETORK: GSM 850 / 900 / 1800 / 1900)
(3G NETORK; 850 / 1700 / 1900 / 2100)
(4G NETWORK: LTE 700 / 1700 / 2100)
I use UK EE 4G which uses a different band.
If I S-off and flash HTC_001 firmware will I get EU band support or are there these limited to hardware?
Thanaks in advance
Ronaldo_9 said:
If I S-off and flash HTC_001 firmware will I get EU band support or are there these limited to hardware?
Click to expand...
Click to collapse
Band support can be added (changed) by flashing the appropriate firmware. New with the Snapdragon 801 is that the band support is software based.
Although you might want to also change the ROM also, if not already. Your carrier and the radio might not play well with the stock ROM's build.prop. Its happened on other carrier versions (causing various network issues).
Hi, i wozld like to buy this phone from Ali, but i need 800 Mhz lte working. He is saying that he can flash his cn version with ww rom and it will unlock 800 Mhz band. Is it possible or he is lying and i will not get 800 mhz working?
Edit: Zenfone 2, 4gb/64 gb
...Mi2SC
There are threads about it here, please search. So far no one has managed to unlock more LTE bands by flashing another ROM, a different kernel is needed but it is impossible, the bootloader is locked.