Here you'll find every info about porting of CM7 into our device, the HTC Wildfire S, aka marvel.
Please dont spam, ask or flood here. There is an special support topic for this:
Discussion and troubleshooting
Stable build:
CM 7.2.0-RC0
- Working WIFI, GPS, BLUETOOTH, CAMERA etc.
http://www.multiupload.com/QIVNST6CPE
md5sum - 071834195f4ddb5626a895d2289aa678
Nightly builds available:
http://code.google.com/p/cm7-wildfire-s/downloads/list
Attention!
The only fully supported phone variant atm is MARVEL.
MARVELC/MARVELCT owners need to be a little patient and do not flash this rom until it's fixed (unless they have some dev experience - it's the kernel)
Description
Standard vanilla Cyanogenmod build, no sugar added
- upstream version changed from 7.1 to 7.2
- fixed "camera and flash" error
- removed ldpi stuff
Credits:
Alquez credits: His wife, Cyanogenmod team, Defer, Drowningchild, HCDR.Jacob, PabloPL,Sadman601, RussCrazyRabbit and Dimasi4ka.
I would also want to thank all the donators and people whom i might forgot / i was unable to give official credit!
Click to expand...
Click to collapse
*Mod Edit - Large font size reduced.
Fixes
- Make 1GB memory for apps
1. Download cm7.2 port by alquez
2. Download data2sd installer http://www.mediafire.com/?757066a1516tdkt
3. Factory wipe then install cm7
4. Back up SD card
5. In recovery go to advanced -> partition SD card -> 1024mb
6. Install data2sd
7. Boot into cyanogenmod
8. Restore SD card stuff if anything went wrong
9. Enjoy and click thanks to benjamingwynn for his tutorial.
Click to expand...
Click to collapse
- Speed up your GPS
- Fix by d33ps1x
Reserved for future 2
no more thread suggestion[s]
--bumped--
sighs......
Guys, PLEASE stay on topic and refrain from trolling/flaming, i dont want to see any more posts like the above (which will be deleted as soon as i have sent this!)
Stay on topic, respect each other and i wont have to hand out infractions so close to Christmas.
Thanks.
Hmmmm
2morrow will b the day i'm going to check this ROM
i test it,
good every thing ...
camera battery and etc
Is the same rom of alquez or it has diferent specs?
buber82 said:
Fixes
- Make 1GB memory for apps
1. Download cm7.2 port by alquez
2. Download data2sd installer http://www.mediafire.com/?757066a1516tdkt
3. Factory wipe then install cm7
4. Back up SD card
5. In recovery go to advanced -> partition SD card -> 1024mb
6. Install data2sd
7. Boot into cyanogenmod
8. Restore SD card stuff if anything went wrong
9. Enjoy and click thanks to benjamingwynn for his tutorial.
Click to expand...
Click to collapse
- Speed up your GPS
- Fix by d33ps1x
Click to expand...
Click to collapse
Hey, I'm new to flashing and stuff. I wanted to ask if I can flash and make my memory for apps 1gb without installing the cm rom and not stock RUU 2.3.5 gingerbread?? I really like sense and just can go away from it
Please let me know!
Royal King said:
Hey, I'm new to flashing and stuff. I wanted to ask if I can flash and make my memory for apps 1gb without installing the cm rom and not stock RUU 2.3.5 gingerbread?? I really like sense and just can go away from it
Please let me know!
Click to expand...
Click to collapse
Wrong place to ask. This should be in the general section.
-Get your phone S-OFF with XTC-Clip
-Install CWM recovery (in general section sticky)
-Install root kit (instructions in general section sticky)
-Follow the directions to prepare your SD card for a second Ext partition
-Download and flash data2sd if you want. Blech...
-Download and use link2sd. Yay!
Please bother to read the general section help topics and ask the question in a non development thread.
Thanks.
It's the same
Sent from my A953
buber82 said:
http://www.multiupload.com/QIVNST6CPE
md5sum - 071834195f4ddb5626a895d2289aa678
Click to expand...
Click to collapse
md5sum not matching for the RC0.
$ md5sum htc/*marvel*
aca175e64ff08fcf29165e97e01bf17b htc/unofficial-CM7-marvel-nigthly-20111216.zip
a497f9f1cf969214dd859cbc24422cc7 htc/unofficial-CM7-marvel-nigthly-20111218.zip
2256c884ce065717b7f49b0ecacb2058 htc/update-cm-7.2.0-RC0-marvel-KANG-signed.zip
No market?
You must install the gapps patch over cwm. The apps you find on cyanogenmod weboage.
Sent from my HTC Wildfire S A510e using XDA App
ONeill123 said:
You must install the gapps patch over cwm. The apps you find on cyanogenmod weboage.
Sent from my HTC Wildfire S A510e using XDA App
Click to expand...
Click to collapse
Are you talking about getting Market on the CyanogenMod Rom i need to install the gapps patch?
Yes, if u want to use the google apps in CM you must install the gapps patch you find on webpage.
ONeill123 said:
Yes, if u want to use the google apps in CM you must install the gapps patch you find on webpage.
Click to expand...
Click to collapse
Could someone please post a link to find the gapp? I can't seem to find it...
http://wiki.cyanogenmod.com/index.php?title=Latest_Version/Google_Apps
When i use this rom, i can call but i cant get called.
buber82 said:
Fixes
- Make 1GB memory for apps
- Speed up your GPS
- Fix by d33ps1x
Click to expand...
Click to collapse
hello
I do all the steps and I have 8GB SD ..... I want 1GB to EXT and the rest of FAT32, SWAP memory does not put anything? because in another forum they have recommended me 500MB of swap memory.
I tried with 1GB in EXT3, SWAP 150mb and the ROM wasn't going very well.....
Related
DISCONTIUNED
Android 2.3.7 - Cyanogen Mod 7.1.0 For Galaxy GIO With Xperia Moddings
Based on phiexz's ROM
CM BASED
Working:
Everything which working in phiexz's ROM was working here.
EXTRAS:
TIMESCAPE
Xperia ARC Launcher
Bravia Engine
Sony Ericsson Timescape Font
I am not responsible for any damage to your phone or brick your gio.
Install:
0. Install CWM recovery. (skip it if u have)
1. Place the zip to your phone
2. Reboot to recovery
3. Full Wipe!
4. Install zip.
5. Full wipe again!
6. Reboot.
Google apps:
- Download it from here: http://wiki.cyanogenmod.com/index.php?title=Latest_Version/Google_Apps
- Download latest version for cyanogenMod 7
- Flash it from cwm recovery
Thanks to :
phiexz
saigetshu
DOWNLOAD
Megaupload is down. The rom is unreachable.. Sorry about that.
If you can't log in into Facebook in Timescape: ( got FC)
Download THIS
Copy to the root of your SD
Boot into the recovery
Mount System
Flash the Zip
SOME SCREENSHOT
this sounds very cool. can you post some ss plz . thak you.
djph4ntom said:
this sounds very cool. can you post some ss plz . thak you.
Click to expand...
Click to collapse
Screens added.
nice job man
thanks you for yours hardwork
which RC version is this mate ?
klebengan said:
which RC version it is mate ?
Click to expand...
Click to collapse
Cm 7.1 Rc3
Sensitivity said:
Cm 7.1 Rc3
Click to expand...
Click to collapse
nice. it is a2sd, link2sd or s2e?
klebengan said:
nice. it is a2sd, link2sd or s2e?
Click to expand...
Click to collapse
a2sd. but u can enable s2e the same way like in phiexz's rom
Sensitivity said:
a2sd. but u can enable s2e the same way like in phiexz's rom
Click to expand...
Click to collapse
thx mate. btw the font is nice but little bit too small
Looks amazing!!
Any screenshots of the apps page? (what u see after u click apps button on "desktop".
Does it show the wallpaper there also? (i dont like that, that's why I ditched CM)
hmm looks pretty nice. maybe i'll give it a try.thank you for your work.. i thought this forum was dead .. 2 days no updates
Do you need to have CM7 installed? I get "can't mount /system" when I try to restore.
c20h25n3o said:
Do you need to have CM7 installed? I get "can't mount /system" when I try to restore.
Click to expand...
Click to collapse
opsz. yes u must have CM firstli
if don't have it. just flash this first -> phiexz 's rom
what about compayibility problems?
screen/buttons
gps/proximity/acceletation
lights/microphone/sound
wifi-umts/2g/calling
video acceleration???
different memory layou
boot behavior
keyboard key size
did i forget some stuff?
Sent from my GT-S5660 using XDA App
It could be interresting to have an installable GioDrivers.zip containing most
recent drivers to hardware.
Yhis would allow improvements to reach the fast modifying phones faster
Sent from my GT-S5660 using XDA App
When it boots I get a FC on Twitter and when I log in with Timescape on facebook I also get FC (yes, I did install the zip separately)
And how do I get my GAPPS back? I installed the zip but I don't see any of the apps after logging in. .
Pity, it's very unstable for me.
Lot's of FC (especially the sony.homescreen thing..), GPS doesn't work for me either.
Nice try though, looks awesome! Real pity doesn't work for me.
c20h25n3o said:
When it boots I get a FC on Twitter and when I log in with Timescape on facebook I also get FC (yes, I did install the zip separately)
And how do I get my GAPPS back? I installed the zip but I don't see any of the apps after logging in. .
Click to expand...
Click to collapse
me too bro.
c20h25n3o said:
Do you need to have CM7 installed? I get "can't mount /system" when I try to restore.
Click to expand...
Click to collapse
i think its no need as long u have the cwm recovery v2 from phiexz and ext4 partition.
nice, finally there is also a custom rom with base CM7.1
okay I'll try it. thanks for sharing
I love this rom, too bad I can't get it stable.
After a lot of tweaking it finally worked OK, but when I rebooted all the apps I installed on SD card were gone.
It made me freak out a little after putting so much time in getting it the way I wanted it.
I will definitely go back to this rom once stable (for me).
Most FC came from sonyericsson.twitter.livefeed (or something) and timescape didn't work at all.
List of issues I ran into:
Several FC: Timescape, home plug in from sony-ericsson
Disappearing apps after reboot from apps-page, no way to get them back.
Installed everything on phone, even when setting was set to "install apps to external"
Aside from that, this was an amazing rom. Love the Sony-Ericsson home tool.
What Cy4noobsMod-7.1.3.1 really is? It is Cyanogen for Noobs Mod based on CM7.1 RC3.0 for gio. Yes like its name, it designed for easy and very user friendly purpose. The basic idea I build the latest CM7.1 RC.3.0 ported by phiexz (as I think it's already final or likely will be no more update) and compiled it with the all good things here covered almost all the potentially frustrating common issues to make it as stable as it can be for daily uses basis. I do some few mods but may slightly unnoticeable. It is not a custom-rom. I didn’t change the interface and such. I just want to keep it as original as the origin. The most noticeable thing I did may just enabled bootsound. The rest are minor (but of course important!). OK, let put it simply now all you have to do Just Flash and Play*.
*still there is a pre-condition and some optional follow up action below
Here some features Cy4noobsMod-7.1.3.1 offers:
• Latest port CM7.1 RC.3.0 with the all working features (credit to phiexz & squadzone)
• preinstalled gapps (credit to Msiiek)
• avoid false reformatting sd-ext by cwm-recovery issue when flashing (credit to waqasshahzad1986)
• enabled bootsound (customizable ready)
• fix split screen issue
• S2E ready (no need to mod or reformatting sd-ext partition again)
• avoid potentially market causes reboot issue
• avoid potentially installing application causes reboot issue
• use market 2.3.6 as a default (but still updateable and offer you more optional action)
• fix some other minor common issues
• just flash & play
• noobs, start your 'en-gio-ne'! and say "eat my dust" to your old migraine!!
Click to expand...
Click to collapse
HOW TO INSTALL
WARNING: Dragons Ahead!
But don’t worry the dragon has been tamed. Even dragon is still a dragon, so still don’t be careless & follow the instruction carefully.
First, make sure the pre-conditions fulfilled:
• have any GB 2.3.3 or upper on your device (or any CM7 rom).
• Already made sd-ext partition on your sd-card (and make sure don’t ever let cwm-recovery touch it reformatting again!), recommended use ext4, more over if want to activated S2E (optional). Don't know how to create partition? Go to mr.waqasshahzad1986 section first, believe me he is your best guide here.
• Have cwm-recovery 5.x (recommended px-cwm or px-cwm-v2). You don't have any yet? Please visit mr.phiexz for CM-7.1 RC-3.0 & cwm 5.x section where this rom originally ported.
• Downloaded Cy4noobsMod-7.1.3.1 zip file copied onto your sd card.
Click to expand...
Click to collapse
Download Cy4noobsMod-7.1.3.1 here:
Cy4noobsMod-7.1.3.1.zip
Installation:
• Just Flash & Play!* via cwm-recovery 5.x (press & hold Home+Power button to enter recovery mode)
*no need to wipe or mount anything, install zip from sdcard > choose zip from sd card > CyanoobsMod-7.1.3.1.zip > Yes-Install
• And you just officially 'noobed'! (I mean you already have Cy4noobsMod-7.1.3.1 on your device).
*always recalibrate your battery after flashing any rom!!
Click to expand...
Click to collapse
easy right?
Optional follow up action:
1. Market
If you want to keep market 2.3.6 as your market and don’t want to get any updated, open terminal emulator (pre-installed with your CM7) and type this:
su
pm disable com.android.vending.updater
Click to expand...
Click to collapse
that will disabled your market updater, but you still can enable it anytime if you decided want to get updated. just change the “disable” type to “enable” with the rest script are still the same.
recommended!! do this as soon as possible after flashed before you got updated automatically. if you already updated just uninstall the new market at "setting>applications>manage applications" and hurry type the script or you can activate flight mode so you will not get updated.
You can ignore all the things from the beginning if you want your market soon get updated (you will get your market updated automatically as long as your internet keep active)
2. Activated S2E (sd-ext ext4 needed!)
• Download S2E from market
• Open it and open its menu, setting, checklist all.
• Buffer size value better leave it as default (there is a chance S2E would repel the partition if set more than 256KB)
• Back, open menu again, choose reboot (usually it won’t reboot at your first time, so you may reboot it manually).
• after reboot open S2E again and checklist all (recommended leave the "application data" still uncheck, but you may check it if you want ap2sd extreme activated).
• open menu, choose reboot again (at this time it should be worked).
• and yes now you have your CM7 with S2E activated.
Click to expand...
Click to collapse
You can ignore all the things if you want try any other app2sd like link2sd (even I think it ported optimized with S2E).
Click to expand...
Click to collapse
Issues:
• There’s a known bug on gio that it can’t be helped. Cwm-recovery have a habit to reformatting your sd-ext, but it does not format the card correctly on gio. It may not harm if you not using any app to sd-ext things (S2E/link2sd/ app2sd/… or etc), but it does if you do. That’s why I warn you to avoid cwm-recovery ever touching your sd-ext (ex:wipe/format/restore/...etc). Just format your sd-ext partition into ext4 only using your computer. If you want to do any recovery backup-restore things better use any other apps, like Titanium Backup maybe (sorry it may just my limitation, hope the other dev here can help us there).
Click to expand...
Click to collapse
Notes:
• As it actually designed for noobs, please be wise to use it as it be. Please, don’t try to do silly things to your rom. Don’t try improvised things that some thing to do with your rom like modding or added tweaks. It may ruined your rom (conflict tweaks caution) and please don’t blame me for that. Customize it will be very welcome as long as not touch that area.
• Sure advance users will always have privileges to do sort things (with notes they knew well the risks. sorry noobs, i'm not being double standard here. i'm a noob too anyway). Feel free to have a try my rom for test its stability sir… your reviews would be really very very appreciated.
• Please ignore some grammar error as long as you can understand me.
Click to expand...
Click to collapse
CREDITS
Thx to:
• phiexz accompany with squadzone, who ported this great rom and let us have a great experiences too with it.
• Msiiek (I got inspired from your work sir)
• waqasshashzad1986 (you will be always be my mentor with all your guides and knowledge shares)
• Maclaw & Delanoister (you guys always motivated me with all of your works...)
• And of course all the members here that I may forgot to mentioned one by one
Last but not least... If this work pleased you, don’t shy to hit thanks button. Regards!
added some SS:
explanation (left to right)
1. the version (i use S5660DXKT4 GB 2.3.6 as my baseband)
2. quadrant score: 2037 clocked at min:247 max:787 gov: ondemand
3. quadrant score: 2562 clocked at min:247 max:902 gov: ondemand
4. memory status
5. S2E
6. How the sd-ext mounted look like on Titanium Backup
don't be fooled by its name guys... it noobs by the installation difficulty level...
but it have CM7 fullest potential...
and the most important thing is its stability!!
please have a try and experience it yourself...
(Please take a note: all devices clock stability are vary, please be wise with it!)
-RESERVED-
very nice .if i'm running into problems again with CM 7.2 , this will be the first thing i will try., ty for your work
Hello! First: thank´s for the work!!!! Another thing: i have the Giopro v1.4 on my phone. Can "update" direct with this rom? And the GPS? Work's nice?
nice job bro
thanks for your hardwork
sure don't need partition ext4 again?
okay I'll try
thanks for your work
djph4ntom said:
very nice .if i'm running into problems again with CM 7.2 , this will be the first thing i will try., ty for your work
Click to expand...
Click to collapse
yes, actually that's one of my goal too sir doing this project. i want to made a safety checkpoint for CM7.
that's why i'm using the latest CM7.1 RC-3.0, as long as we can see it look like will be no more any development (already fixed).
currently i'm testing CM7.2 too (build by Mclaw+del-kernell)...
ur welcom...
kompressorgpl said:
Hello! First: thank´s for the work!!!! Another thing: i have the Giopro v1.4 on my phone. Can "update" direct with this rom? And the GPS? Work's nice?
Click to expand...
Click to collapse
ur welcome...
as long as it is GB 2.3.3 & upper based, you already have fulfilled one of the pre-condition sir... yes just do it directly no need to wipe or mount anything... Just Flash & Play!
as for the gps issue you can read the issues section up there...
AskBack said:
nice job bro
thanks for your hardwork
Click to expand...
Click to collapse
u'r welcome bro...
ddiel said:
sure don't need partition ext4 again?
okay I'll try
thanks for your work
Click to expand...
Click to collapse
yup, just do it once only on your computer before flashing it
please take a note don't do wipe or mount anything on cwm-recovery, bcoz it potentially ruined ur partition... so do it just like the motto:
Just Flash & Play!
please try it and ur welcom bro...
einsal said:
please take a note don't do wipe or mount anything on cwm-recovery, bcoz it potentially ruined ur partition...
Click to expand...
Click to collapse
So CWM is basically useless? Doesn't this means we can't do back up/restore?
Wabot said:
So CWM is basically useless? Doesn't this means we can't do back up/restore?
Click to expand...
Click to collapse
You're right after backup it will format ext anyways so all this rom is useless untill new cwm because you still need to use card reader but maybe you can restore from cwm excluding ext partition I dont know anyways I use titanium to backup ext ofcourse maybe Im wrong?
Sent from my GT-S5660 using Tapatalk
Wabot said:
So CWM is basically useless? Doesn't this means we can't do back up/restore?
Click to expand...
Click to collapse
kajjtan said:
You're right after backup it will format ext anyways so all this rom is useless untill new cwm because you still need to use card reader but maybe you can restore from cwm excluding ext partition I dont know anyways I use titanium to backup ext ofcourse maybe Im wrong?
Sent from my GT-S5660 using Tapatalk
Click to expand...
Click to collapse
much n less...
but not really that useless too... it still plays an important role... actually we can still do backup even some wipe action as long nothing to do to our sd-ext... (i just being cautious)... yes just like kajjtan said...
S2e cant read my ext4 , how ??
Im sure i have ext4 , cos minitool says so !
shuegig said:
S2e cant read my ext4 , how ??
Im sure i have ext4 , cos minitool says so !
Click to expand...
Click to collapse
hm... did you do all the step right?
pre-condition > create ext4 (cluster size 4kb) partition first on your computer
installation > flash the rom with cwm with no wipe & mount??
if there still a problem try to re-do the step...
einsal said:
hm... did you do all the step right?
pre-condition > create ext4 (cluster size 4kb) partition first on your computer
installation > flash the rom with cwm with no wipe & mount??
if there still a problem try to re-do the step...
Click to expand...
Click to collapse
Yes I did.. maybe I shall try tomorrow ..
Sent from the GUN in my pants
shuegig said:
Yes I did.. maybe I shall try tomorrow ..
Sent from the GUN in my pants
Click to expand...
Click to collapse
Flash kernel and it will see your partition it helped to me
Sent from my GT-S5660 using Tapatalk
guys i learned & did some little test about gps setting n tweaks... my self conclusion about it gps is very so depend on location (ex:like the country where we live)... it's hard to generalized the issue... some specific setting/tweak can be optimized on some specific location, but can ruined on the other specific location...
so far i have no problem with the current gps, so i just leave it as it is (with the thoughts it's the best default setting)... i won't counted it as an issue as long there is no report so far...
kajjtan said:
Flash kernel and it will see your partition it helped to me
Sent from my GT-S5660 using Tapatalk
Click to expand...
Click to collapse
hm... so there is "an issue"...
anw thx mate for the solution!!
einsal said:
hm... so there is "an issue"...
anw thx mate for the solution!!
Click to expand...
Click to collapse
Yeah I was stuck on this activating S2E few days ago free space was showing my ext but S2E not so I have formated my card about 6 times on cwm on windows on linux even on some other software but no luck so I remembered waqas1986(cant spell his nick to hard remember) words to falsh new kernel so all.credits goes to him.
Sent from my GT-S5660 using Tapatalk
kajjtan said:
Yeah I was stuck on this activating S2E few days ago free space was showing my ext but S2E not so I have formated my card about 6 times on cwm on windows on linux even on some other software but no luck so I remembered waqas1986(cant spell his nick to hard remember) words to falsh new kernel so all.credits goes to him.
Sent from my GT-S5660 using Tapatalk
Click to expand...
Click to collapse
Delans kernal?
Sent from the GUN in my pants
yeah guys... actually there is "an issue"... not with the rom but the s2e itself... (sorry, actually i'm new too to this s2e things)
sometimes there is a chance s2e repel the partition if the buffer size value set default changed... so better just leave it as default... i''ll edited the s2e activation step...
oh yeah u can try some custom kernel from Delanoister, use the kernel for CM-7.1...
General thread for the JB CM10/AOSP based rom by cronmod dev team here and the ICS CM9 based rom here.
Check the respective rom sites for a what's working/not working list, features and download links. Discuss general things about the rom here such as a2sd scripts and any issues
As requested by the dev for the ICS rom:
What's NOT working?
Code:
[LIST]
[*]Camera force closes while recording video
[*]Hardware decoding for video playback -> laggy playback of 720p (use software decoding in Mx Player instead).
[*]Home/Search key (use the fix over [URL="http://forum.xda-developers.com/showpost.php?p=34075493&postcount=131"]here[/URL])
[/LIST]
Anything that isn't said there is working fine. Will update the list if others find anything that doesn't work. Before asking for help do check you have the right hboot and that the md5 is correct after you download the rom. Also make sure you perform a full wipe when migrating to these roms.
Bear in mind that ICS was not made for our devices. Do not expect the stability of GB but the devs have done a great job on this and it is quite stable and quick for daily use.
Installation for CM9 ICS rom:
Code:
[U]Full wipe recommended before each flash from new version and is NEEDED if coming from any other rom.[/U]
Partition SD card so you have less than 1.5gb in sd-ext partition and the rest as FAT32. Gparted is recommended.
Flash the rom from recovery.
Grab m2sd from [URL="http://forum.xda-developers.com/showthread.php?t=1342387"]here[/URL] (credit to dk_zero-cool) and flash it from recovery using whatever options you want (recommended by to choose apps and dalvik).
Wipe cache/dalvik and reboot :)
You can use cron's INT2EXT scripts as well from here and just flash in place of m2sd.
Feel free to ask any questions here but keep the dev threads on topic.
Anyone using the JB rom if you could post a not working list from your tests that'd be great .
Since corey moved on to JB the cron r2 hboot isn't available on the website anymore. The current version of the ICS cronmod rom still fits on to the 183mb system hboot so I thought to put this up here for those that want a bit more space in data
WARNING: The size of the system partition may increase in future so the hboot might not be compatible with future versions of cronmod cm9.
Check md5 before flashing and flash through fastboot using "fastboot flash hboot filepathAndName.img"
md5: 172965041d6483dd9e57d726096bab73
pawan1993 said:
Since corey moved on to JB the cron r2 hboot isn't available on the website anymore. The current version of the ICS cronmod rom still fits on to the 183mb system hboot so I thought to put this up here for those that want a bit more space in data
WARNING: The size of the system partition may increase in future so the hboot might not be compatible with future versions of cronmod cm9.
Check md5 before flashing and flash through fastboot using "fastboot flash hboot filepathAndName.img"
md5: 172965041d6483dd9e57d726096bab73
Click to expand...
Click to collapse
Give link to cmx boot animation here so I can add in rom.
Regards
Sent from my HTC Desire using xda app-developers app
Yasir Javed Ansari said:
Give link to cmx boot animation here so I can add in rom.
Regards
Sent from my HTC Desire using xda app-developers app
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1847678
There you go
Hello,
is this ROM stable for everyday use ?
Frem
frem said:
Hello,
is this ROM stable for everyday use ?
Frem
Click to expand...
Click to collapse
yes the only issues are listed in the threads
frem said:
Hello,
is this ROM stable for everyday use ?
Frem
Click to expand...
Click to collapse
Its quite usable as a daily rom. At least I use it daily. But don't expect the level of stability like gingerbread. I mean, The kernel is still under improvement. Best way is to use it for a few days and judge yourself.
Regards
Sent from my HTC Desire using xda app-developers app
Hello,
I flashed this ICS rom just before Yasir took over and I must say I'm happy with it.
It is a bit slower than my previous CM7 rom of course but nothing dramatic, and it somehow seems more stable for some reason (GPS works, for example!).
And I still get a quite big amount of space on data thanks to the cron r2 hboot, which is great!
And I also love the CM9 tweaks.
So overall a good surprise for my first jump from CM7 roms.
But I tested Chrome and discovered it is so laggy it is unusable. Do you guys have the same issue?
Sillik said:
Hello,
I flashed this ICS rom just before Yasir took over and I must say I'm happy with it.
It is a bit slower than my previous CM7 rom of course but nothing dramatic, and it somehow seems more stable for some reason (GPS works, for example!).
And I still get a quite big amount of space on data thanks to the cron r2 hboot, which is great!
And I also love the CM9 tweaks.
So overall a good surprise for my first jump from CM7 roms.
But I tested Chrome and discovered it is so laggy it is unusable. Do you guys have the same issue?
Click to expand...
Click to collapse
Chrome isn't made for our devices. Not the best browser for us but it's great on other phones
frem said:
Hello,
is this ROM stable for everyday use ?
Frem
Click to expand...
Click to collapse
The rom itself is amazingly quick and stable. Considering it's ICS I'd say it's the best ICS rom out right now. Haven't tried CronMod JB though.
pawan1993 said:
Chrome isn't made for our devices. Not the best browser for us but it's great on other phones
Click to expand...
Click to collapse
That's a shame.
I have another question: what 3rd party app could I use for video recording?
I tried UCam and it didn't work...
Sillik said:
That's a shame.
I have another question: what 3rd party app could I use for video recording?
I tried UCam and it didn't work...
Click to expand...
Click to collapse
I don't need video recording myself so I wouldn't know. But any camera app should work. I've heard good things about ICS Camera on market. Very close to stock camera app as well.
I'm going to be linking my friend this ROM soon-ish (once beta comes out) and she's using a BravoC on Ntelos. What kind of prep would she need to do on the phone before flashing the ROM? Like a wipe script or something to repartition or what? Want it to go as smooth as possible.
cosine83 said:
I'm going to be linking my friend this ROM soon-ish (once beta comes out) and she's using a BravoC on Ntelos. What kind of prep would she need to do on the phone before flashing the ROM? Like a wipe script or something to repartition or what? Want it to go as smooth as possible.
Click to expand...
Click to collapse
just wipe and install as listed in OP but be sure to have a ext partition if you plan to use a script
pawan1993 said:
I don't need video recording myself so I wouldn't know. But any camera app should work. I've heard good things about ICS Camera on market. Very close to stock camera app as well.
Click to expand...
Click to collapse
I tried it and sadly it crashes like the stock app.
Anyone knows of a working camera app that can record video with a working preview?
Sillik said:
I tried it and sadly it crashes like the stock app.
Anyone knows of a working camera app that can record video with a working preview?
Click to expand...
Click to collapse
i think illusion should work
croniccorey said:
just wipe and install as listed in OP but be sure to have a ext partition if you plan to use a script
Click to expand...
Click to collapse
Using scripts is kind of new to me. I've always had devices with a lot of storage for apps. What would you recommend?
cosine83 said:
Using scripts is kind of new to me. I've always had devices with a lot of storage for apps. What would you recommend?
Click to expand...
Click to collapse
I suggest you to use INT2EXT+ with this ROM, take a look HERE.
I noticed that when i install a new app (from the market or an .apk), the system hangs for a while, sometimes it even pop with a system error, but if i select to wait the system then starts to work again, i have installed INT2EXT+ script with a 512 sd-ext partition on a Class 4 8 GB SD card. Could the low SD class can cause this problem? SD read cache is correctly set at 2 MB.
Could you amswer me whats working and whats not working in your cm9 rom? Cant find it
Hello all,
There are many questions asked in the development thread of this respective roms(slimkat by xenon92 and cm11.0 by pawitp). I am creating this thread so that all unrelated to bugs topics can be discussed here.
eg: -how to flash the rom
- about not working apps
- about xposed etc etc.
If you have found a bug please report it with logcat in the dev thread :
here for CM11.0and here for Slimkat
Also if you don't know to logcat i will attach the logcat to the dev thread if you mention it here.
I will be adding detailed guide on flashing these ROM to reduce unwanted questions.
Download mirror
cm11.0 build 20131217
cm11.0 build 20131225
credits naufalhadyan
NOTE :
-Some apps will not work in these roms, the reason is that the respective developer has not made it compatible with 4.4.x.
- The rom is not faulty. The dev must compile it using latest sdk(sdk 19) to run on kitkat running phones like ours.
Kudos to pawitp and xenon92 !
Detailed Guide and some facts
Detailed Guide to Flash CM11.0, Slimkat & Carbon rom :
MAIN STEP:
- First of, to flash both the ROMs we need to be on 4.2.2 firmware(4.2.2 bootloader). Flash the 4.2.2 stock firmware via odin and follow the below guide.
STEP 1:
* Download the ROM and gapps you want to flash and put it in either internal or external sdcard.(you can find them in Original thread which is in 1st post)
STEP 2:
* You need to flash SElinux compatible recovery.
link - [URL="http://forum.xda-developers.com/showthread.php?t=2437182]here[/URL]
* This is the same way you root.
- Download recovery.
- Select PDA in odin and select recovery.
- Hit start !
STEP 3:
* Press Vol up + Home + Power button(all at once) to go to the recovery.
* Now the Steps to flash the rom :
- Wipe cache partition.
- Wipe data/factory reset.
- Mounts and Storage--> format /system
- (back) advanced--> wipe dalvik cache.
- (back) Install zip from sdcard-->choose zip from sdcard(internal)/extsdcard. WHEREVER YOU HAVE PLACED THE ROM AND GAPPS.
- After flashing ROM flash gapps the same way.
- (back back) Reboot system now.
Thats all !!
Click to expand...
Click to collapse
- CM10.1
- Stock 4.1.2(Samsung firmware/roms)
- Slimbean 4.2.2
- PAC 4.2.2
- Resurrection Remix
Are you on any of the above rom and want to flash cm11.0 and slimkat?
Solution : Follow the above guide from MAIN STEP - STEP 3.
Click to expand...
Click to collapse
-CM 10.2
- 4.2.2 STOCK(4.2.2 Samsung rom/firmware)
Are you on any of the above ROM and want to flash cm11.0 and kitkat?
Solution : Skip the MAIN STEP. Follow STEP 1-3.
Click to expand...
Click to collapse
Are you on any of the above roms previous build and want to update to latest build?
Solution: -Go to cwm recovery
- Install zip from sdcard-->choose zip from sdcard extsdcard(select latest build)
- hit YES.
Click to expand...
Click to collapse
Jump between these ROMs.
Solution : Follow STEP 3.
Click to expand...
Click to collapse
SlimKAt memory issue
In SlimKAT Rom
Out of 4 Gb .... only 1.3 gb is available...
plz tell where is rest of memory...also there is no app 2 sd support...
so plz atleast provide full 4gb...though 8 gb is grand internal memory...
P.S- I flashed slimkat rom on TW 4.2.2 stock... wiped all data and everything...
still got just 1.3gb out of 4 GB
Ashish924 said:
In SlimKAT Rom
Out of 4 Gb .... only 1.3 gb is available...
plz tell where is rest of memory...also there is no app 2 sd support...
so plz atleast provide full 4gb...though 8 gb is grand internal memory...
P.S- I flashed slimkat rom on TW 4.2.2 stock... wiped all data and everything...
still got just 1.3gb out of 4 GB
Click to expand...
Click to collapse
Hello, This happens due to the kernel changes between stock and cm.
If you see in stock there is sdcard and extsdcard. In cm it is under emulated directory.
I also had this problem. I use the below solution
I always
-backup sdcard
-format /sdcard
-upgrade to 4.2.2
-flash cm
Wiping data doesn't always mean wiping internal memory. so you need to go to mounts and storage-->format /sdcard and see if it retains.
else,
you need to
-downgrade
-backup sdcard if you want
-format /sdcard
-upgrade
-flash rom.
Sent from my GT-I9082 using xda app-developers app
Incoming call valum very low,
I am on cm-11 20131214 . when i receive call i cant listen voice clearly due to low volume. I would like to know how to increase volume . I have already tried in setting -volume but it didnt work. even i cannot send any file from sd card with Bluetooth, it dosent show the Bluetooth option in Share Manu. thank you for nice rom.
Thnku
Thanx Bub... it worked :victory:
same here, low volume on call....
Sent from my iPhone using Tapatalk
Art -gapps not working
I dont know weather it is bug or any problem. Gapps dont support the ART, but when i select switch from Delvik to ART it shows "unfortunately gapps stopped working." something like this . kindly give me the solution.
dipakkiran said:
I am on cm-11 20131214 . when i receive call i cant listen voice clearly due to low volume. I would like to know how to increase volume . I have already tried in setting -volume but it didnt work. even i cannot send any file from sd card with Bluetooth, it dosent show the Bluetooth option in Share Manu. thank you for nice rom.
Click to expand...
Click to collapse
alpine111573 said:
same here, low volume on call....
Sent from my iPhone using Tapatalk
Click to expand...
Click to collapse
I am not facing this bug for sure, i have been attending calls from morning.
You can backup your apps and try clean installing the latest build(including format system).
dipakkiran said:
I dont know weather it is bug or any problem. Gapps dont support the ART, but when i select switch from Delvik to ART it shows "unfortunately gapps stopped working." something like this . kindly give me the solution.
Click to expand...
Click to collapse
hello, cm team is still working on ART to support priv-apps to reduce fcs it is better to use dalvik cache for now as ART is still only stable in nexus 5 and some other low end devices
Sent from my GT-I9082 using xda app-developers app
Update Question
Do i need to wide data clean to install update of existing rom..
pratikhinge said:
Do i need to wide data clean to install update of existing rom..
Click to expand...
Click to collapse
From previous builds, you don't need to. Just install the zip. The second post already explains this clearly.
First of all thanks @chotu222 for creating this thread ma issue is FONTS i used font installer worked fine but only for the first time and now i updated the rom to the latest build lol dpi default agn and even fonts nt changed any work around to change fonts???
Sent from Samsung galaxy grand running pawitp's cm 11
Google now widget doesn't appear
I am on cm11 and there is no google now widget appearing in the widgets menu for the homescreen. Happens with launcher 3 as well as GE. I am able add a widget on my lockscreen.
pre****10 said:
I am on cm11 and there is no google now widget appearing in the widgets menu for the homescreen. Happens with launcher 3 as well as GE. I am able add a widget on my lockscreen.
Click to expand...
Click to collapse
What gapps have you flashed??? :what:
Sent from Samsung galaxy grand running pawitp's cm 11
Thanks a lot @chotu222 for creating this thread.would go a long way for ppl who wants to make themselves sufficiently clear before flashing...
Sulaimanshariff said:
What gapps have you flashed??? :what:
Sent from Samsung galaxy grand running pawitp's cm 11
Click to expand...
Click to collapse
kitkat gapps.
dipakkiran said:
I am on cm-11 20131214 . when i receive call i cant listen voice clearly due to low volume. I would like to know how to increase volume . I have already tried in setting -volume but it didnt work. even i cannot send any file from sd card with Bluetooth, it dosent show the Bluetooth option in Share Manu. thank you for nice rom.
Click to expand...
Click to collapse
sAME HERE.. law cal volume
g4govind87 said:
sAME HERE.. law cal volume
Click to expand...
Click to collapse
Flash the latest build n try!!
Sent from my GT-I9082 using Tapatalk 4
Same low volume!!! Please anyone help
Sent from my GT-I9505 using xda app-developers app
grainy video on youtube app
youtube videos are grainy on the youtube app
i'm using the latest version of youtube from playstore.
anybody facing this? knows how to fix this?
CM11 15/12/13
Hey guys here is a new "Stock" ROM with cool features,but this time it's Arabic version.
Features
-Fully De-odexed.
-Init.d Support.
-DSP Manager Added.
-Advanced Reboot Menu.
-HTC Calculator Widget and HTC Flashlight added.
-Stock UI (No Themes).
-Adreno200 Libs Updated.
-Stock Kernel.
-Screenshot Feature (Power Button + Home Button).
Install
-Wipe data and cache and format boot and data and cache and sd-ext and system and wipe dalvik-cache and battery stats.
-Install ROM.
-Install INT2EXT+ (If you want).
-Reboot.
-Done.
Credits
-Me.
-XDA.
-HTC.
-My WFS.
- @crossfire77 and his credits.
Changelog
Code:
V1.0
Added all cool features
===================
Add-Ons
-Nothing for now.
Downloads
Download Links
V1.0
So, you think de-odex is better on stock rom?
Just a noob question: Can I change the language to English during 1st boot.?
polfrank said:
So, you think de-odex is better on stock rom?
Click to expand...
Click to collapse
Odex is better to have more internal memory.
De-odex is better for theming support.
But anyway,I'll make an Odex ROM as soon as possible
crashmekiran said:
Just a noob question: Can I change the language to English during 1st boot.?
Click to expand...
Click to collapse
Dnw :S ,why not asking it in WFS Q&A?
But anyway,why change it?As it'll be changed from setup wizard directly.
AmirNajjar said:
Odex is better to have more internal memory.
De-odex is better for theming support.
But anyway,I'll make an Odex ROM as soon as possible
Click to expand...
Click to collapse
It's ok, I don't need it, I was just asking your oppinion..
But you can make it for others if you like.
has Spanish???
bonilobo62 said:
has Spanish???
Click to expand...
Click to collapse
No,only arabic,english and french,as it says [Arabic Version]
If you want spanish version,then go to @crossfire77 thread and get ROM Based on EU RUU
Install INT2EXT+ (If you want)???!!!
v1 or v2?
what is the difference?
should it changes in rom performance?
how can i install it?
HOSNY_MH said:
Install INT2EXT+ (If you want)???!!!
v1 or v2?
what is the difference?
should it changes in rom performance?
how can i install it?
Click to expand...
Click to collapse
Yes.if you want
There is only v1
What should change what?
Install what?
I didn't understand a damn thing about your post
First Ramadan Kareem
Second I'd like to know problems of this Rom
I'be tried it but when I updated talk"hangout" and supersu I hangs and restarted
If u can tell me a Rom that is perfect with large storage and look like stock Rom
HOSNY_MH said:
First Ramadan Kareem
Second I'd like to know problems of this Rom
I'be tried it but when I updated talk"hangout" and supersu I hangs and restarted
If u can tell me a Rom that is perfect with large storage and look like stock Rom
Click to expand...
Click to collapse
Thx Ramadan Karim for you too
This ROM should have no issue but I don;'t know why this happened to you
anyway if you want a ROM with stock like alike you'll have CM7 Sense by Kevinjoa
thanx & sorry for my questions
can u give me a link for Kevinjoa rom?
i need a stock rom but have an huge internal space
HOSNY_MH said:
thanx & sorry for my questions
can u give me a link for Kevinjoa rom?
i need a stock rom but have an huge internal space
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2186174
Hello,
Thank you for your rom.
I have 2 questions :
1 - When I use the French language, the menus and text are in English not in French ?
2 - I flashed the Int2ext+ just after flashing your rom, after booting system, I haven't the entension memory, I have 63MB only.
I tried with 2 kinds of partitions in the SD card : 512MB and 1024MB, Int2ext+ doesn't work.
Need help
Than you
TF85 said:
Hello,
Thank you for your rom.
I have 2 questions :
1 - When I use the French language, the menus and text are in English not in French ?
2 - I flashed the Int2ext+ just after flashing your rom, after booting system, I haven't the entension memory, I have 63MB only.
I tried with 2 kinds of partitions in the SD card : 512MB and 1024MB, Int2ext+ doesn't work.
Need help
Than you
Click to expand...
Click to collapse
1-That bug,it's not my problem
2-What's the partition type you're using?
Hello,
SD card 8GB :
1st partition FAT32.
2d partition EXT3 a little bit less then 1GB
Thanx
TF85 said:
Hello,
SD card 8GB :
1st partition FAT32.
2d partition EXT3 a little bit less then 1GB
Thanx
Click to expand...
Click to collapse
How did u partition it (Using which program)?
With : MiniTool Partition Wizard Home Edition V8.1