Hello all,
There are many questions asked in the development thread of this respective roms(slimkat by xenon92 and cm11.0 by pawitp). I am creating this thread so that all unrelated to bugs topics can be discussed here.
eg: -how to flash the rom
- about not working apps
- about xposed etc etc.
If you have found a bug please report it with logcat in the dev thread :
here for CM11.0and here for Slimkat
Also if you don't know to logcat i will attach the logcat to the dev thread if you mention it here.
I will be adding detailed guide on flashing these ROM to reduce unwanted questions.
Download mirror
cm11.0 build 20131217
cm11.0 build 20131225
credits naufalhadyan
NOTE :
-Some apps will not work in these roms, the reason is that the respective developer has not made it compatible with 4.4.x.
- The rom is not faulty. The dev must compile it using latest sdk(sdk 19) to run on kitkat running phones like ours.
Kudos to pawitp and xenon92 !
Detailed Guide and some facts
Detailed Guide to Flash CM11.0, Slimkat & Carbon rom :
MAIN STEP:
- First of, to flash both the ROMs we need to be on 4.2.2 firmware(4.2.2 bootloader). Flash the 4.2.2 stock firmware via odin and follow the below guide.
STEP 1:
* Download the ROM and gapps you want to flash and put it in either internal or external sdcard.(you can find them in Original thread which is in 1st post)
STEP 2:
* You need to flash SElinux compatible recovery.
link - [URL="http://forum.xda-developers.com/showthread.php?t=2437182]here[/URL]
* This is the same way you root.
- Download recovery.
- Select PDA in odin and select recovery.
- Hit start !
STEP 3:
* Press Vol up + Home + Power button(all at once) to go to the recovery.
* Now the Steps to flash the rom :
- Wipe cache partition.
- Wipe data/factory reset.
- Mounts and Storage--> format /system
- (back) advanced--> wipe dalvik cache.
- (back) Install zip from sdcard-->choose zip from sdcard(internal)/extsdcard. WHEREVER YOU HAVE PLACED THE ROM AND GAPPS.
- After flashing ROM flash gapps the same way.
- (back back) Reboot system now.
Thats all !!
Click to expand...
Click to collapse
- CM10.1
- Stock 4.1.2(Samsung firmware/roms)
- Slimbean 4.2.2
- PAC 4.2.2
- Resurrection Remix
Are you on any of the above rom and want to flash cm11.0 and slimkat?
Solution : Follow the above guide from MAIN STEP - STEP 3.
Click to expand...
Click to collapse
-CM 10.2
- 4.2.2 STOCK(4.2.2 Samsung rom/firmware)
Are you on any of the above ROM and want to flash cm11.0 and kitkat?
Solution : Skip the MAIN STEP. Follow STEP 1-3.
Click to expand...
Click to collapse
Are you on any of the above roms previous build and want to update to latest build?
Solution: -Go to cwm recovery
- Install zip from sdcard-->choose zip from sdcard extsdcard(select latest build)
- hit YES.
Click to expand...
Click to collapse
Jump between these ROMs.
Solution : Follow STEP 3.
Click to expand...
Click to collapse
SlimKAt memory issue
In SlimKAT Rom
Out of 4 Gb .... only 1.3 gb is available...
plz tell where is rest of memory...also there is no app 2 sd support...
so plz atleast provide full 4gb...though 8 gb is grand internal memory...
P.S- I flashed slimkat rom on TW 4.2.2 stock... wiped all data and everything...
still got just 1.3gb out of 4 GB
Ashish924 said:
In SlimKAT Rom
Out of 4 Gb .... only 1.3 gb is available...
plz tell where is rest of memory...also there is no app 2 sd support...
so plz atleast provide full 4gb...though 8 gb is grand internal memory...
P.S- I flashed slimkat rom on TW 4.2.2 stock... wiped all data and everything...
still got just 1.3gb out of 4 GB
Click to expand...
Click to collapse
Hello, This happens due to the kernel changes between stock and cm.
If you see in stock there is sdcard and extsdcard. In cm it is under emulated directory.
I also had this problem. I use the below solution
I always
-backup sdcard
-format /sdcard
-upgrade to 4.2.2
-flash cm
Wiping data doesn't always mean wiping internal memory. so you need to go to mounts and storage-->format /sdcard and see if it retains.
else,
you need to
-downgrade
-backup sdcard if you want
-format /sdcard
-upgrade
-flash rom.
Sent from my GT-I9082 using xda app-developers app
Incoming call valum very low,
I am on cm-11 20131214 . when i receive call i cant listen voice clearly due to low volume. I would like to know how to increase volume . I have already tried in setting -volume but it didnt work. even i cannot send any file from sd card with Bluetooth, it dosent show the Bluetooth option in Share Manu. thank you for nice rom.
Thnku
Thanx Bub... it worked :victory:
same here, low volume on call....
Sent from my iPhone using Tapatalk
Art -gapps not working
I dont know weather it is bug or any problem. Gapps dont support the ART, but when i select switch from Delvik to ART it shows "unfortunately gapps stopped working." something like this . kindly give me the solution.
dipakkiran said:
I am on cm-11 20131214 . when i receive call i cant listen voice clearly due to low volume. I would like to know how to increase volume . I have already tried in setting -volume but it didnt work. even i cannot send any file from sd card with Bluetooth, it dosent show the Bluetooth option in Share Manu. thank you for nice rom.
Click to expand...
Click to collapse
alpine111573 said:
same here, low volume on call....
Sent from my iPhone using Tapatalk
Click to expand...
Click to collapse
I am not facing this bug for sure, i have been attending calls from morning.
You can backup your apps and try clean installing the latest build(including format system).
dipakkiran said:
I dont know weather it is bug or any problem. Gapps dont support the ART, but when i select switch from Delvik to ART it shows "unfortunately gapps stopped working." something like this . kindly give me the solution.
Click to expand...
Click to collapse
hello, cm team is still working on ART to support priv-apps to reduce fcs it is better to use dalvik cache for now as ART is still only stable in nexus 5 and some other low end devices
Sent from my GT-I9082 using xda app-developers app
Update Question
Do i need to wide data clean to install update of existing rom..
pratikhinge said:
Do i need to wide data clean to install update of existing rom..
Click to expand...
Click to collapse
From previous builds, you don't need to. Just install the zip. The second post already explains this clearly.
First of all thanks @chotu222 for creating this thread ma issue is FONTS i used font installer worked fine but only for the first time and now i updated the rom to the latest build lol dpi default agn and even fonts nt changed any work around to change fonts???
Sent from Samsung galaxy grand running pawitp's cm 11
Google now widget doesn't appear
I am on cm11 and there is no google now widget appearing in the widgets menu for the homescreen. Happens with launcher 3 as well as GE. I am able add a widget on my lockscreen.
pre****10 said:
I am on cm11 and there is no google now widget appearing in the widgets menu for the homescreen. Happens with launcher 3 as well as GE. I am able add a widget on my lockscreen.
Click to expand...
Click to collapse
What gapps have you flashed??? :what:
Sent from Samsung galaxy grand running pawitp's cm 11
Thanks a lot @chotu222 for creating this thread.would go a long way for ppl who wants to make themselves sufficiently clear before flashing...
Sulaimanshariff said:
What gapps have you flashed??? :what:
Sent from Samsung galaxy grand running pawitp's cm 11
Click to expand...
Click to collapse
kitkat gapps.
dipakkiran said:
I am on cm-11 20131214 . when i receive call i cant listen voice clearly due to low volume. I would like to know how to increase volume . I have already tried in setting -volume but it didnt work. even i cannot send any file from sd card with Bluetooth, it dosent show the Bluetooth option in Share Manu. thank you for nice rom.
Click to expand...
Click to collapse
sAME HERE.. law cal volume
g4govind87 said:
sAME HERE.. law cal volume
Click to expand...
Click to collapse
Flash the latest build n try!!
Sent from my GT-I9082 using Tapatalk 4
Same low volume!!! Please anyone help
Sent from my GT-I9505 using xda app-developers app
grainy video on youtube app
youtube videos are grainy on the youtube app
i'm using the latest version of youtube from playstore.
anybody facing this? knows how to fix this?
CM11 15/12/13
Related
DISCONTIUNED
Android 2.3.7 - Cyanogen Mod 7.1.0 For Galaxy GIO With Xperia Moddings
Based on phiexz's ROM
CM BASED
Working:
Everything which working in phiexz's ROM was working here.
EXTRAS:
TIMESCAPE
Xperia ARC Launcher
Bravia Engine
Sony Ericsson Timescape Font
I am not responsible for any damage to your phone or brick your gio.
Install:
0. Install CWM recovery. (skip it if u have)
1. Place the zip to your phone
2. Reboot to recovery
3. Full Wipe!
4. Install zip.
5. Full wipe again!
6. Reboot.
Google apps:
- Download it from here: http://wiki.cyanogenmod.com/index.php?title=Latest_Version/Google_Apps
- Download latest version for cyanogenMod 7
- Flash it from cwm recovery
Thanks to :
phiexz
saigetshu
DOWNLOAD
Megaupload is down. The rom is unreachable.. Sorry about that.
If you can't log in into Facebook in Timescape: ( got FC)
Download THIS
Copy to the root of your SD
Boot into the recovery
Mount System
Flash the Zip
SOME SCREENSHOT
this sounds very cool. can you post some ss plz . thak you.
djph4ntom said:
this sounds very cool. can you post some ss plz . thak you.
Click to expand...
Click to collapse
Screens added.
nice job man
thanks you for yours hardwork
which RC version is this mate ?
klebengan said:
which RC version it is mate ?
Click to expand...
Click to collapse
Cm 7.1 Rc3
Sensitivity said:
Cm 7.1 Rc3
Click to expand...
Click to collapse
nice. it is a2sd, link2sd or s2e?
klebengan said:
nice. it is a2sd, link2sd or s2e?
Click to expand...
Click to collapse
a2sd. but u can enable s2e the same way like in phiexz's rom
Sensitivity said:
a2sd. but u can enable s2e the same way like in phiexz's rom
Click to expand...
Click to collapse
thx mate. btw the font is nice but little bit too small
Looks amazing!!
Any screenshots of the apps page? (what u see after u click apps button on "desktop".
Does it show the wallpaper there also? (i dont like that, that's why I ditched CM)
hmm looks pretty nice. maybe i'll give it a try.thank you for your work.. i thought this forum was dead .. 2 days no updates
Do you need to have CM7 installed? I get "can't mount /system" when I try to restore.
c20h25n3o said:
Do you need to have CM7 installed? I get "can't mount /system" when I try to restore.
Click to expand...
Click to collapse
opsz. yes u must have CM firstli
if don't have it. just flash this first -> phiexz 's rom
what about compayibility problems?
screen/buttons
gps/proximity/acceletation
lights/microphone/sound
wifi-umts/2g/calling
video acceleration???
different memory layou
boot behavior
keyboard key size
did i forget some stuff?
Sent from my GT-S5660 using XDA App
It could be interresting to have an installable GioDrivers.zip containing most
recent drivers to hardware.
Yhis would allow improvements to reach the fast modifying phones faster
Sent from my GT-S5660 using XDA App
When it boots I get a FC on Twitter and when I log in with Timescape on facebook I also get FC (yes, I did install the zip separately)
And how do I get my GAPPS back? I installed the zip but I don't see any of the apps after logging in. .
Pity, it's very unstable for me.
Lot's of FC (especially the sony.homescreen thing..), GPS doesn't work for me either.
Nice try though, looks awesome! Real pity doesn't work for me.
c20h25n3o said:
When it boots I get a FC on Twitter and when I log in with Timescape on facebook I also get FC (yes, I did install the zip separately)
And how do I get my GAPPS back? I installed the zip but I don't see any of the apps after logging in. .
Click to expand...
Click to collapse
me too bro.
c20h25n3o said:
Do you need to have CM7 installed? I get "can't mount /system" when I try to restore.
Click to expand...
Click to collapse
i think its no need as long u have the cwm recovery v2 from phiexz and ext4 partition.
nice, finally there is also a custom rom with base CM7.1
okay I'll try it. thanks for sharing
I love this rom, too bad I can't get it stable.
After a lot of tweaking it finally worked OK, but when I rebooted all the apps I installed on SD card were gone.
It made me freak out a little after putting so much time in getting it the way I wanted it.
I will definitely go back to this rom once stable (for me).
Most FC came from sonyericsson.twitter.livefeed (or something) and timescape didn't work at all.
List of issues I ran into:
Several FC: Timescape, home plug in from sony-ericsson
Disappearing apps after reboot from apps-page, no way to get them back.
Installed everything on phone, even when setting was set to "install apps to external"
Aside from that, this was an amazing rom. Love the Sony-Ericsson home tool.
This is a port of PAC 4.2.2 v22.1 from http://forum.xda-developers.com/showthread.php?t=2177236
For further information you should go to that thread and see what the ROM is capable of.
All i have done is change the KERNEL with BPauls kernel from his CM10.1 Rom from http://forum.xda-developers.com/showthread.php?t=2262795
and also changed the build.prop and updater-script so that it would install on the Xperia Acro S.
All bugs present in the original ROM will most likely also be present now.
Credits go to funky0308, Shingers5 and Vertigo for the ROM and Bpaul for the kernel.
---------------------
Latest Relase (14/05/13) ****Small issue with mounting the normal storage wait till i fix that before installing this version if you downloaded it, if you have already go back to recovery and install my previous version then i will fix and you can install the new one.
Fixed External SD card not mounting
Fixed Rotation Issue
Initial Release (13/05/13)
Download the ROM from Download mirror
GAPPS from http://goo.im/gapps/gapps-jb-20130301-signed.zip
Install Instructions are:
1. Unlock bootloader.
2. Extract and Flash boot.img from hikari_PAC_JB_4.2.2-v22.1.1_Themed-v2.zip (fastboot flash boot boot.img)
3. Go in to recovery:
-- On boot led will be violet for 3 second. During this period press vol+
-- Flash ROM
-- Flash Gapps
-- Wipe data (factory reset)
-- Reboot.
If coming from BPauls CM 10.1 or Official CM10 you can skip step 1 and 2.
If coming from a previous build of mine you can skip the WIPE data part as well unless you get FC i have never had an issue.
Known Bugs
none as of 14/05/13
1)Hi The rotation is wrong, when you turn right the phone turng left and when you put head up the phone head off
2)Dont install the External SD Card (microsd)
You use the ACRO S kernel or S Kernel ?? this is very important
Regards
Juan
juanenbas said:
1)Hi The rotation is wrong, when you turn right the phone turng left and when you put head up the phone head off
2)Dont install the External SD Card (microsd)
You use the ACRO S kernel or S Kernel ?? this is very important
Regards
Juan
Click to expand...
Click to collapse
I used the Acro S kernel from BPaul so it should work i will take a look at it tonight might just be a lib file i missed.
When i was using root explorer it did say SDCARD0 and 1 so it might have something to do with that so i will see if the microSD card is being mounted properly, been meaning to buy one so will grab one and test.
Also i will look into the proximity sensor probably the same issue with rotation too.
OK my friend, surely any file is missed about Rotation and SDCARD01 (microsd)
Thanks a lot...and your ROM is GUAUUUUU only thats two bug
Regards
Juan
Very slow, has alot of Sony bloatware but good job porting.
lewis021 said:
Very slow, has alot of Sony bloatware but good job porting.
Click to expand...
Click to collapse
Did you wipe data, and cache and Dalvik cache because mine is very smooth, i use 3D launcher and camera loads alot quicker then stock. I dont want to change it much from the one im porting from. However if i do get around to building everything from source i will be sure to limit what is installed by default.
Have a question, If I come from BPaul ROM 4.2.2 if necesary Flash boot.img from hikari_PAC_JB_4.2.2-v22.1.1_Themed-v2.zip ?? or Can used the boot.img from BPAUL ??
Thanks
Juan
juanenbas said:
Have a question, If I come from BPaul ROM 4.2.2 if necesary Flash boot.img from hikari_PAC_JB_4.2.2-v22.1.1_Themed-v2.zip ?? or Can used the boot.img from BPAUL ??
Thanks
Juan
Click to expand...
Click to collapse
No it isnt. You just need to have the option to be able to flash the ROM i will amend the instructions to make that clear.
deedwar said:
No it isnt. You just need to have the option to be able to flash the ROM i will amend the instructions to make that clear.
Click to expand...
Click to collapse
Thanks my friend, when arrive to my house I will flash again with correct boot.img
Did you test Fix rotation and Fix MicroSD ? are working well ??
reagards
Juan
juanenbas said:
Thanks my friend, when arrive to my house I will flash again with correct boot.img
Did you test Fix rotation and Fix MicroSD ? are working well ??
reagards
Juan
Click to expand...
Click to collapse
Sure did, just let me know if they dont work for you.
Shouldnt this be in the development forum?
Sent from my 4.2.2 Xperia S via Tapatalk
I wasn't sure because all I did was port. Been a little more involved than I originally thought but nothing major. Feel free to move it to development if that is where it is meant to be.
Sent from my Xperia Acro S using Tapatalk 2
Great Deedwar I wait your Fix, and after will test for you
regards
Juan
deedwar said:
Did you wipe data, and cache and Dalvik cache because mine is very smooth, i use 3D launcher and camera loads alot quicker then stock. I dont want to change it much from the one im porting from. However if i do get around to building everything from source i will be sure to limit what is installed by default.
Click to expand...
Click to collapse
CM10.1 runs alot smoother. I see many Xperia plugins and unnecessary apps.
Sent from my LT26w using xda premium
Deedwar you has finished the fix ?, in this case upload and I can test the same
regards
Juan
juanenbas said:
Deedwar you has finished the fix ?, in this case upload and I can test the same
regards
Juan
Click to expand...
Click to collapse
I fixed the rotation issue but every time I think I fix the external card it disables the internal.
Sent from my Xperia Acro S using Tapatalk 2
deedwar said:
I wasn't sure because all I did was port. Been a little more involved than I originally thought but nothing major. Feel free to move it to development if that is where it is meant to be.
Sent from my Xperia Acro S using Tapatalk 2
Click to expand...
Click to collapse
You could always message vertigo as he's the official PAC man and tell him what you've done and ask if you can post it in development. As long as it credits the correct people (which u already have) i wouldn't have thought that would be a problem?
Sent from my 4.2.2 Xperia S via Tapatalk
Ben36 said:
You could always message vertigo as he's the official PAC man and tell him what you've done and ask if you can post it in development. As long as it credits the correct people (which u already have) i wouldn't have thought that would be a problem?
Sent from my 4.2.2 Xperia S via Tapatalk
Click to expand...
Click to collapse
Already gotten their permission never would steal someone else's hard work without there blessing. Will fix the issue with external card mounting and might do that then. Thanks
Have a questions in your Latest Relase (14/05/13) you was using PACman v22.0.1 - Themed v3 ???... or..... PACman v22.1.1 - Themed v2 ??
Because the error with External SD could be from V22.0.1 Version 3 (Old Nozomi) !!!
Regards
Moved to the development thread here
Disclaimer: I take no responsibility for bad things that may occur as a result of flashing this.
NOTE: If coming from 10.1, make a back up first as you will not be able to flash back to 10.1 unless you factory reset
These are Unofficial CM 10.2 builds for the Sprint Galaxy Note 2.
It is recommended to flashed this in CWM .
Source: http://github.com/sbrissen
Instructions:
-Download and copy rom to sdcard
-Download and copy gapps to sdcard (make sure they are for 4.3!)
-Reboot into recovery (CWM)
-Flash rom
-Flash gapps
-Wipe data/cache
-Reboot
Known Bugs:
-May need to get a gps lock on stock before switching to CM in order for gps to work
-BT voice search
- Graphical glitches (i.e. black screens) - will require new Mali graphic blobs
- No screenshot or anything that relies on screenshots - will require new Mali graphic blobs
[8/1]ROM: http://www.androidfilehost.com/?fid=23060877489997666
Changes:
- Initial Release
[8/8]ROM: http://www.androidfilehost.com/?fid=23060877489998606
Changes:
- Fix Screenshots (framework hack)
- CM Upstream Changes
Downloading now... Thx
Sent from my SPH-L900 using xda premium
sbrissen said:
Disclaimer: I take no responsibility for bad things that may occur as a result of flashing this.
NOTE: If coming from 10.1, make a back up first as you will not be able to flash back to 10.1 unless you factory reset
These are Unofficial CM 10.2 builds for the Sprint Galaxy Note 2.
It is recommended to flashed this in CWM .
Instructions:
-Download and copy rom to sdcard
-Download and copy gapps to sdcard (make sure they are for 4.3!)
-Reboot into recovery (CWM)
-Flash rom
-Flash gapps
-Wipe data/cache
-Reboot
Known Bugs:
-May need to get a gps lock on stock before switching to CM in order for gps to work
-BT voice search
- Graphical glitches (i.e. black screens) - will require new Mali graphic blobs
- No screenshot or anything that relies on screenshots - will require new Mali graphic blobs
[8/1]ROM: http://www.androidfilehost.com/?fid=23060877489997666
Changes:
- Initial Release
Click to expand...
Click to collapse
Thanks for this I'll have to try it next week after Sprint gets my Note fixed.
Yay!
Fantastic!
Sent from my SPH-L900 using Tapatalk 2
No problems installing... GPS works... However, Ad Away and Titanium Backup reports su not installed...
Sent from my SPH-L900 using xda premium
Camera and focal both work great!!! Lte is working and what am I missing....graphics bugs aren't as bad either...when on browser page still flickers and everything but not as bad as the first release...gps is about as good as in can get...I don't use Bluetooth or dock audio so I can't offer my insight but so far so good on everything else
Sent from my SPH-L900 using xda premium
---------- Post added at 04:28 AM ---------- Previous post was at 04:19 AM ----------
Another two cent input....video recording freezes focal and causes camera cannot connect but video record works fine in camera
Sent from my SPH-L900 using xda premium
1midniterider said:
No problems installing... GPS works... However, Ad Away and Titanium Backup reports su not installed...
Sent from my SPH-L900 using xda premium
Click to expand...
Click to collapse
Read here. http://forum.xda-developers.com/showthread.php?p=44127382
Sent from my SPH-L900 using Tapatalk 2
1midniterider said:
No problems installing... GPS works... However, Ad Away and Titanium Backup reports su not installed...
Sent from my SPH-L900 using xda premium
Click to expand...
Click to collapse
EVERYBODY TO GET SUPERUSER to work you need to go into about phone. Click on the build number on the bottom until you enable developer settings. Then go into developer settings and set root to work with apps and adb.
qwasz123 said:
EVERYBODY TO GET SUPERUSER to work you need to go into about phone. Click on the build number on the bottom until you enable developer settings. Then go into developer settings and set root to work with apps and adb.
Click to expand...
Click to collapse
For what its worth I type su in terminal command just to make sure root is enabled....
Sent from my SPH-L900 using xda premium
Hay Op thanks for this but you say you need 4.3 gapps were is the link to download load it please.
Sent from my SPH-L900 using xda premium
Nice!
working very well, can't wait for the next update! Thanks
Is this build any different than the one slick posted back in the 10.1 thread?
Sent from my SPH-L900 using xda app-developers app
Sbrissen strikes again. You rock Scott!
Not sure if it's related to the graphic glitches mentioned in the OP, but fonts weird out in GOSMS when rotated to landscape. The fonts change to a larger, stretched version.
Sent from my SPH-L900 using xda premium
Milton1964 said:
Hay Op thanks for this but you say you need 4.3 gapps were is the link to download load it please.
Sent from my SPH-L900 using xda premium
Click to expand...
Click to collapse
http://goo.im/devs/BaNkS/GApps 4.3
I installed GApps_Core_4.3.zip and downloaded the rest (Gmail, Calendar, Maps) from Play Store.
upon reboot I am stuck on splash screen, guess I installed an app that is screwin with stuff or something. Anyone else come across this?
sbrissen said:
Instructions:
-Download and copy rom to sdcard
-Download and copy gapps to sdcard (make sure they are for 4.3!)
-Reboot into recovery (CWM)
-Flash rom
-Flash gapps
-Wipe data/cache
-Reboot
Click to expand...
Click to collapse
So no data wipe or factory reset needed when coming from another stock or custom ROM? Or is that a given?
JimSmith94 said:
So no data wipe or factory reset needed when coming from another stock or custom ROM? Or is that a given?
Click to expand...
Click to collapse
Yes you need to do a data wipe after you install the rom but before you reboot.
Props to scott for getting this out so fast, unlike normal for me, I'm going to stay off the cutting edge for a bit and hang out in the stable CM10.1 world a bit longer (now that the working RIL blobs are back )
Disclaimer: I take no responsibility for bad things that may occur as a result of flashing this.
NOTE: If coming from 10.1, make a back up first as you will not be able to flash back to 10.1 unless you factory reset
These are Unofficial CM 10.2 builds for the Verizon Galaxy Note 10.1
Prereq: Unlocked Bootloader
It is recommended to flashed this in CWM .
Source: http://github.com/sbrissen
Instructions:
-Download and copy rom to sdcard
-Download and copy gapps to sdcard (make sure they are for 4.3!)
-Reboot into recovery (CWM)
-Flash rom
-Flash gapps
-Wipe data/cache
-Reboot
Known Bugs:
-May need to get a gps lock on stock before switching to CM in order for gps to work
-BT voice search
- Graphical glitches (i.e. black screens) - will require new Mali graphic blobs
- No screenshot or anything that relies on screenshots - will require new Mali graphic blobs
[8/1]ROM: http://www.androidfilehost.com/?fid=23060877489997664
Changes:
- Initial Release
[8/8]ROM: http://www.androidfilehost.com/?fid=23060877489998603
Changes:
- Fix Screenshots (framework hack)
- CM Upstream Changes
sbrissen said:
Disclaimer: I take no responsibility for bad things that may occur as a result of flashing this.
NOTE: If coming from 10.1, make a back up first as you will not be able to flash back to 10.1 unless you factory reset
These are Unofficial CM 10.2 builds for the Verizon Galaxy Note 10.1
Prereq: Unlocked Bootloader
It is recommended to flashed this in CWM .
Source: http://github.com/sbrissen
Instructions:
-Download and copy rom to sdcard
-Download and copy gapps to sdcard (make sure they are for 4.3!)
-Reboot into recovery (CWM)
-Flash rom
-Flash gapps
-Wipe data/cache
-Reboot
Known Bugs:
-May need to get a gps lock on stock before switching to CM in order for gps to work
-BT voice search
- Graphical glitches (i.e. black screens) - will require new Mali graphic blobs
- No screenshot or anything that relies on screenshots - will require new Mali graphic blobs
[8/1]ROM: http://www.androidfilehost.com/?fid=23060877489997664
Changes:
- Initial Release
Click to expand...
Click to collapse
I got a built prop error like no sch i925 stuff....was not able to flash it...
what recovery did you use? also have you tried redownloading?
can anyone else confirm the same result?
Sent from my SCH-I605 using xda app-developers app
Where can we download Gapps for 4.3? I didn't see them on goo.im.
Edit: Ah just found this http://forum.xda-developers.com/showthread.php?t=2378992
sbrissen said:
what recovery did you use? also have you tried redownloading?
can anyone else confirm the same result?
Sent from my SCH-I605 using xda app-developers app
Click to expand...
Click to collapse
I have cwm installed, i will try again...but one question first: do I have to have an american kind of galaxy note 10.1 (Verizon) or can it be installed on any kind of international Hardware? maybe thats my issue?
Edit1: redownloaded, still not working, same error
Also i have been wondering this. Is it bad to format preload? I did so by accident :/
W00fah said:
Also i have been wondering this. Is it bad to format preload? I did so by accident :/
Click to expand...
Click to collapse
No Problem, if you format preload.
Grtz Rongogo
GT-N8000
With Rongogorom
GeneralSmart said:
I have cwm installed, i will try again...but one question first: do I have to have an american kind of galaxy note 10.1 (Verizon) or can it be installed on any kind of international Hardware? maybe thats my issue?
Edit1: redownloaded, still not working, same error
Click to expand...
Click to collapse
Yes you will need the vzw note 10.1, that's why the assert is failing. Its a fail safe so a rom isn't flashed on a device its not meant for.
Sent from my GT-N5110 using xda app-developers app
So far this is so much faster than stock ROM. I'm still testing if 4g is any weaker.
Thanks so much for this work. Its like having a brand new tablet with latest and greatest!
Sent from my SCH-I925 using xda premium
Since there isn't a stock image for the device, would a cwm backup be suitable in rolling back should I experience any issues?
zerogauge said:
Since there isn't a stock image for the device, would a cwm backup be suitable in rolling back should I experience any issues?
Click to expand...
Click to collapse
Yes
Sent from my GT-N5110 using xda app-developers app
Yes, cwm will restore your saved backup.
But so far, I'm not sure I will need to. This is blazingly faster..
Sent from my SCH-I925 using xda premium
Awesome, thanks for the replies. Flashed this morning and I'm now setting everything up. So far I'm loving it though. Quick boot times and overall it feels a lot leaner. Thanks for the rom and the support. Been following you since the fascinate days.
*Edit* Ran into a redraw issue or something with TouchdownHD. I posted a video at http://youtu.be/dz5gzv6Sdco is there a setting available that might fix this? I've tried re-installing the application and I still get the same issue.
This rom is just like lightning...thanks sbrissen!
Sent from my GT-I9300 using Tapatalk 2
Will this work on n8010?
Quick question,can this be installed on the 8013, is there any way for you to make for it. Anyway thanks for making great roms for our devices.
Sent from my GT-N801x using Tapatalk 4
xlamian said:
Quick question,can this be installed on the 8013, is there any way for you to make for it. Anyway thanks for making great roms for our devices.
Sent from my GT-N801x using Tapatalk 4
Click to expand...
Click to collapse
Try it and find out keep us posted.
Nandroid.
Edit: Just tried it. Does not work It checks to make sure you are on the correct device, as stated on the first page
LexusBrian400 said:
Try it and find out keep us posted.
Nandroid.
Edit: Just tried it. Does not work It checks to make sure you are on the correct device, as stated on the first page
Click to expand...
Click to collapse
You could try what I did and unzip, swap metainf folder from 8013 installer go through the build.prop file with notepad ++ and change tablet type from Verizon to n8013 and see what happens! Good luck :laugh:
smegg said:
You could try what I did and unzip, swap metainf folder from 8013 installer go through the build.prop file with notepad ++ and change tablet type from Verizon to n8013 and see what happens! Good luck :laugh:
Click to expand...
Click to collapse
I will give it a try once I get back home...next week,can't afford to be without it while travelling with the kid.
Sent from my GT-N801x using Tapatalk 4
xlamian said:
I will give it a try once I get back home...next week,can't afford to be without it while travelling with the kid.
Sent from my GT-N801x using Tapatalk 4
Click to expand...
Click to collapse
Hey I found this too, wish I had it before instead of just shooting in the dark...lol
http://forum.xda-developers.com/showthread.php?t=2179629
Dear XDA,
I've built CM12 for the E975, F180. Please find the instructions and downloads below. Enjoy!
About this ROM
Unfortunately I do not have time to manually fix the issues by myself, so for now, this is just a preview build of what CM12 is currently.
I might not even have time to flash new builds, so please be cautious.
Disclaimer: I am not responsible for any damage, loss, inconvenience caused by this ROM. (Also your warranty will be void)
Instructions
0) Have a working modem if you are on F180
1) Transfer the zips to your internal SD, then enter recovery
2) Wipe /data, /cache, /system ("wipe data & factory reset", "mounts and storage, format /system")
3) Install cm-12-20141118-UNOFFICIAL-e975.zip, you might get a warning about insuccessful mount operation, but that's right, because the partitions are already mounted.
4) Install gapps-lp-20141109-signed.zip
5) Flash SU binaries: UPDATE-SuperSU-v2.16.zip
6) Reboot & have fun!
Screens
DevDB::Screenshots
Download
Automated builds should appear in this directory:
http://androidba.se/23~f Big thanks for the awesome storage for c0urier
Alternative download: http://d-h.st/users/gyebro/?fld_id=41399#files
gapps-lp-20141109-signed.zip from https://s.basketbuild.com/gapps or [direct link]
UPDATE-SuperSU-v2.16.zip
Working:
Network, WiFi, GPS, Camera
Not working:
?
New features:
as of 24.11.08
On-screen navigation bar, Advanced reboot (see dev options), Clear all recents button moved to top-right corner
Known issues:
as of 24.11.08
No deep sleep -> Fix this by deleting: system/vendor/firmware/libpn544_fw.so
Kernel crash: Google Now,Google Play music, YouTube
No gesture typing in keyboard.
XDA:DevDB Information
CM12-EXPERIMENTAL-PREVIEW, ROM for the LG Optimus G
Contributors
Gyebro
ROM OS Version: 5.0.x Lollipop
ROM Kernel: Linux 3.4.x
Based On: CyanogenMod 12
Version Information
Status: Snapshot
Created 2014-11-20
Last Updated 2014-11-20
Very nice. Happy to see new devs around
In call sound work on this ROM?
cristian313 said:
In call sound work on this ROM?
Click to expand...
Click to collapse
If you had a working modem before installation, call sound/quality should be fine.
I'm using an F180S (which had CM11 on it before), call quality is great, others could hear me & I can hear others
But for your own good: do a backup before trying
Thank you very much.
Found bug on camera when changing resolution to 4.9mpixel 4:3 ratio. Preview is bad.
Here is screen shot and photo captured by camera.
perfect !!! anything I expected from all of you
Nevermind, was able to fix root with last SuperSU beta
Everything almost working fine here except for the kernel crash on google now
Nice work, really, working fine. ?
Great work. Almost AOSP looks like many CM features are yet to be implemented.
Sent from my LG-E975 using XDA Free mobile app
Do not enter in deep sleep...
AdrianSC said:
Do not enter in deep sleep...
Click to expand...
Click to collapse
Known CM bug...
Sent from my LG-E975 using XDA Free mobile app
AdrianSC said:
Do not enter in deep sleep...
Click to expand...
Click to collapse
Sorin90 said:
Known CM bug...
Sent from my LG-E975 using XDA Free mobile app
Click to expand...
Click to collapse
Try this: go to system/vendor/firmware and delete the libpn544_fw.so file and then reboot.
akahroba said:
Try this: go to system/vendor/firmware and delete the libpn544_fw.so file and then reboot.
Click to expand...
Click to collapse
Work fine Thanks!
Download link does not work! Page does not exist!
Download link not working :\
Download link is not working, it shows "You’ve found a page that doesn’t exist!
But don’t fret... here’s a page that does." What can I do?
Zunex95 said:
Download link does not work! Page does not exist!
Click to expand...
Click to collapse
AGNBSL said:
Download link is not working, it shows "You’ve found a page that doesn’t exist!
But don’t fret... here’s a page that does." What can I do?
Click to expand...
Click to collapse
Link is fine currently, might have been temporarily unavailable.
Has anyone tried this on MultiRom? I used a build in the Sprint forums but was intended for e975 that is CM12. It worked great but did not boot a secondary rom.
EDIT NVM, I see what you mean. The dev page exists, but the download page does not. My apologies.
Under "Public", where say "This folder is read only", click in the arrow button (right of the text), and download all folder... U download 3 zips and gapps, but i don't know other method.
EDIT: Gyebro, other issue is kernel crash when u open YouTube.
AdrianSC said:
Under "Public", where say "This folder is read only", click in the arrow button (right of the text), and download all folder... U download 3 zips and gapps, but i don't know other method.
EDIT: Gyebro, other issue is kernel crash when u open YouTube.
Click to expand...
Click to collapse
Any chance you feel like uploading the newest zip of those 3 to google drive or something?
dopy25 said:
Any chance you feel like uploading the newest zip of those 3 to google drive or something?
Click to expand...
Click to collapse
Of course, i upload the newest zip in google drive, here is link: https://drive.google.com/uc?id=0B4wP0TQVFOE8a1BXNnJsZV9zN00&export=download