After getting the GN, I did the update to 4.0.2. Waited a few hours and then went to work. The store I work at has the ability to use NFC. I thought what the hell, I'll try it. Fired up the app cause it was already on my phone and created an account. Got the free $10. And then I made a purchase!!
What the hell? I though Verizon was blocking it. Anyway, I decide to update my apps thru the market and it brought down the newest Google Wallet APK from 12.12.11. Now when I open the app it states that I must have a Google Employee account and the only option is to press "ok" and it closes the app.
Anyone else tried this? Dont know if it works out the box and the update for it kills it or if it just takes time for Verizon to find out and they kill it on there side.
christianpeso said:
After getting the GN, I did the update to 4.0.2. Waited a few hours and then went to work. The store I work at has the ability to use NFC. I thought what the hell, I'll try it. Fired up the app cause it was already on my phone and created an account. Got the free $10. And then I made a purchase!!
What the hell? I though Verizon was blocking it. Anyway, I decide to update my apps thru the market and it brought down the newest Google Wallet APK from 12.12.11. Now when I open the app it states that I must have a Google Employee account and the only option is to press "ok" and it closes the app.
Anyone else tried this? Dont know if it works out the box and the update for it kills it or if it just takes time for Verizon to find out and they kill it on there side.
Click to expand...
Click to collapse
are you rooted? how did you get the app again. please elaborate
it is not on the market for me.
Honestly, I dont know how I got it. I thought it came with it. And I never had Wallet before on any ANdroid phone so it wasn't syncing it from prior. Was just going thru my apps list and it was there. Even after all this, I then unlocked my bootloader and that reset everything. Google wallet was still there and there was that update in the market. Going back to work today. Will probably lock and unlock again and try Wallet again to see if it works before updating it.
I am not rooted.
can you pull the apk and post up here please
Please post proof, I'm using a non rooted stock GSM NS and I don't see it in the market.
christianpeso said:
Honestly, I dont know how I got it. I thought it came with it. And I never had Wallet before on any ANdroid phone so it wasn't syncing it from prior. Was just going thru my apps list and it was there. Even after all this, I then unlocked my bootloader and that reset everything. Google wallet was still there and there was that update in the market. Going back to work today. Will probably lock and unlock again and try Wallet again to see if it works before updating it.
I am not rooted.
Click to expand...
Click to collapse
Using Astro or any other file explorer:
navigate to "/" (the root directory of the phone, root is not required to view the files here)
Go to the "System" folder
Long press on the "build" or "build.prop" file, and select "open as," then select "text"
I used "File Editor" in the pop up dialog that appears
DO NOT EDIT/CHANGE ANYTHING, just look!
scroll down and report all the lines that start with both "ro.build. ..." and "ro.product. ..."
I would bet you have a slightly different Google-employee-only test build...
---------- Post added at 09:03 AM ---------- Previous post was at 09:02 AM ----------
slackwaresupport said:
can you pull the apk and post up here please
Click to expand...
Click to collapse
yes, or this!
Or, ChristianPeso, can you download "Barcode Scanner" from the market, and generate a market link to the app via QR code? and upload the QR code image here?
Uploaded with ImageShack.us
Uploaded with ImageShack.us
Uploaded with ImageShack.us
Verizon 4g lte GN. Does this not come with new phones?
christianpeso said:
Uploaded with ImageShack.us
Uploaded with ImageShack.us
Uploaded with ImageShack.us
Verizon 4g lte GN. Does this not come with new phones?
Click to expand...
Click to collapse
Thanks, and no. This is potentially awesome news
s.m.knipe said:
thanks, and no. This is potentially awesome news
Click to expand...
Click to collapse
pull this apk!!!
My build.prop:
Code:
# begin build properties
# autogenerated by buildinfo.sh
ro.build.id=ICL53F
ro.build.display.id=ICL53F
ro.build.version.incremental=235179
ro.build.version.sdk=14
ro.build.version.codename=REL
ro.build.version.release=4.0.2
ro.build.date=Thu Dec 8 01:28:56 UTC 2011
ro.build.date.utc=1323307736
ro.build.type=user
ro.build.user=android-build
ro.build.host=vpbs6.mtv.corp.google.com
ro.build.tags=release-keys
ro.product.model=Galaxy Nexus
ro.product.brand=google
ro.product.name=mysid
ro.product.device=toro
ro.product.board=tuna
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product.manufacturer=samsung
ro.product.locale.language=en
ro.product.locale.region=US
ro.wifi.channels=
ro.board.platform=omap4
# ro.build.product is obsolete; use ro.product.device
ro.build.product=toro
# Do not try to parse ro.build.description or .fingerprint
ro.build.description=mysid-user 4.0.2 ICL53F 235179 release-keys
ro.build.fingerprint=google/mysid/toro:4.0.2/ICL53F/235179:user/release-keys
ro.build.characteristics=nosdcard
# end build properties
#
# system.prop for toro
#
rild.libpath=/vendor/lib/libsec-ril_lte.so
rild.libargs=-d /dev/ttys0
telephony.lteOnCdmaDevice=1
# Ril sends only one RIL_UNSOL_CALL_RING, so set call_ring.multiple to false
ro.telephony.call_ring.multiple=0
# Turn on IMS by default
persist.radio.imsregrequired=1
persist.radio.imsallowmtsms=1
# Default ecclist
ro.ril.ecclist=112,911,#911,*911
#
# ADDITIONAL_BUILD_PROPERTIES
#
ro.com.google.clientidbase=android-verizon
ro.com.google.locationfeatures=1
ro.url.legal=http://www.google.com/intl/%s/mobile/android/basic/phone-legal.html
ro.url.legal.android_privacy=http://www.google.com/intl/%s/mobile/android/basic/privacy.html
ro.setupwizard.mode=OPTIONAL
ro.cdma.home.operator.numeric=310004
ro.cdma.home.operator.alpha=Verizon
ro.cdma.homesystem=64,65,76,77,78,79,80,81,82,83
ro.cdma.data_retry_config=default_randomization=2000,0,0,120000,180000,540000,960000
ro.gsm.data_retry_config=max_retries=infinite,default_randomization=2000,0,0,80000,125000,485000,905000
ro.gsm.2nd_data_retry_config=max_retries=infinite,default_randomization=2000,0,0,80000,125000,485000,905000
ro.config.vc_call_vol_steps=7
ro.cdma.otaspnumschema=SELC,1,80,99
wifi.interface=wlan0
wifi.supplicant_scan_interval=15
ro.opengles.version=131072
ro.sf.lcd_density=320
dalvik.vm.heapstartsize=8m
dalvik.vm.heapgrowthlimit=64m
dalvik.vm.heapsize=256m
ro.config.ringtone=Girtab.ogg
ro.config.notification_sound=Proxima.ogg
ro.config.alarm_alert=Cesium.ogg
ro.com.android.dateformat=MM-dd-yyyy
ro.com.android.dataroaming=false
ro.com.android.wifi-watchlist=GoogleGuest
ro.error.receiver.system.apps=com.google.android.feedback
ro.setupwizard.enterprise_mode=1
keyguard.no_require_sim=true
drm.service.enabled=true
camera.flash_off=0
dalvik.vm.dexopt-flags=m=y
net.bt.name=Android
dalvik.vm.stack-trace-file=/data/anr/traces.txt
i dont see any real differences from yours to mine.
I have no idea then. Waiting for someone else with GN Verizon LTE running 4.0.2 to chime in with they got it or not.
I don't have it, nor can I locate it in the market, must be hidden. And mine's totally stock, got it yesterday at 9 AM.
this is mine.
# begin build properties
# autogenerated by buildinfo.sh
ro.build.id=ICL53F
ro.build.display.id=Android Revolution HD 2.1.0 LTE by mike1986
ro.build.version.incremental=235179
ro.build.version.sdk=14
ro.build.version.codename=REL
ro.build.version.release=4.0.2
ro.build.date=Thu Dec 8 01:28:56 UTC 2011
ro.build.date.utc=1323307736
ro.build.type=user
ro.build.user=android-build
ro.build.host=vpbs6.mtv.corp.google.com
ro.build.tags=release-keys
ro.product.model=Galaxy Nexus
ro.product.brand=google
ro.product.name=mysid
ro.product.device=toro
ro.product.board=tuna
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product.manufacturer=samsung
ro.product.locale.language=en
ro.product.locale.region=US
ro.wifi.channels=
ro.board.platform=omap4
# ro.build.product is obsolete; use ro.product.device
ro.build.product=toro
# Do not try to parse ro.build.description or .fingerprint
ro.build.description=mysid-user 4.0.2 ICL53F 235179 release-keys
ro.build.fingerprint=google/mysid/toro:4.0.2/ICL53F/235179:user/release-keys
ro.build.characteristics=nosdcard
# end build properties
#
# system.prop for toro
#
rild.libpath=/vendor/lib/libsec-ril_lte.so
rild.libargs=-d /dev/ttys0
telephony.lteOnCdmaDevice=1
# Ril sends only one RIL_UNSOL_CALL_RING, so set call_ring.multiple to false
ro.telephony.call_ring.multiple=0
# Turn on IMS by default
persist.radio.imsregrequired=1
persist.radio.imsallowmtsms=1
# Default ecclist
ro.ril.ecclist=112,911,#911,*911
#
# ADDITIONAL_BUILD_PROPERTIES
# BUILD.PROP_MODIFIED_BY_MIKE1986_FOR_ANDROID_REVOLUTION_HD
ro.com.google.clientidbase=android-verizon
ro.com.google.locationfeatures=1
ro.url.legal=http://www.google.com/intl/%s/mobile/android/basic/phone-legal.html
ro.url.legal.android_privacy=http://www.google.com/intl/%s/mobile/android/basic/privacy.html
ro.setupwizard.mode=OPTIONAL
ro.cdma.home.operator.numeric=310004
ro.cdma.home.operator.alpha=Verizon
ro.cdma.homesystem=64,65,76,77,78,79,80,81,82,83
ro.cdma.data_retry_config=default_randomization=2000,0,0,120000,180000,540000,960000
ro.gsm.data_retry_config=max_retries=infinite,default_randomization=2000,0,0,80000,125000,485000,905000
ro.gsm.2nd_data_retry_config=max_retries=infinite,default_randomization=2000,0,0,80000,125000,485000,905000
ro.cdma.otaspnumschema=SELC,1,80,99
wifi.interface=wlan0
wifi.supplicant_scan_interval=120
ro.opengles.version=131072
ro.sf.lcd_density=320
dalvik.vm.heapstartsize=8m
dalvik.vm.heapgrowthlimit=64m
dalvik.vm.heapsize=256m
ro.config.ringtone=Girtab.ogg
ro.config.notification_sound=Proxima.ogg
ro.config.alarm_alert=Cesium.ogg
ro.com.android.dateformat=MM-dd-yyyy
ro.com.android.dataroaming=false
ro.com.android.wifi-watchlist=GoogleGuest
ro.error.receiver.system.apps=com.google.android.feedback
ro.setupwizard.enterprise_mode=1
keyguard.no_require_sim=true
drm.service.enabled=true
camera.flash_off=0
dalvik.vm.dexopt-flags=m=y
net.bt.name=Android
dalvik.vm.stack-trace-file=/data/anr/traces.txt
# Additional build.prop tweaks for Android Revolution HD
# Tweaks identyfication code
ro.ident=Android_Revolution_HD
# Disable debugging notify icon on statusbar
persist.adb.notify=0
ro.config.vc_call_vol_steps=100
Well damn, dont I feel lucky. Gonna wipe everything and restart again to see if I can get it to work. Will take some video if I do.
christianpeso said:
I have no idea then. Waiting for someone else with GN Verizon LTE running 4.0.2 to chime in with they got it or not.
Click to expand...
Click to collapse
*raises hand*
I got the 4.0.2 update yesterday. I didn't get Google Wallet.
christianpeso said:
Honestly, I dont know how I got it. I thought it came with it. And I never had Wallet before on any ANdroid phone so it wasn't syncing it from prior. Was just going thru my apps list and it was there. Even after all this, I then unlocked my bootloader and that reset everything. Google wallet was still there and there was that update in the market. Going back to work today. Will probably lock and unlock again and try Wallet again to see if it works before updating it.
I am not rooted.
Click to expand...
Click to collapse
can you go to app manager to see if you can uninstall the update?
usually available to stock applications.
rashad1 said:
Please post proof, I'm using a non rooted stock GSM NS and I don't see it in the market.
Click to expand...
Click to collapse
yes - how do we GLOBAL GSM users get google wallet?
its a bit ridiculous that i upgraded from Nexus S to Galaxy Nexus but LOSE a functionality!!!!
pull the apk first with adb!!!
Related
People who has donated, a HUGE THX!
This is VALUE PACK!!!
http://www.sammobile.com/2012/01/06/seems-like-samsung-has-started-tweaking-their-galaxy-s/
I have repacked this fw to a 3 file for Odin. Enjoy!
I removed this from the rom, just example fotos vids, etc
Here it is if you want it.
http://www.multiupload.com/K73HD9JFU1
Also a CWM ROM http://forum.xda-developers.com/showthread.php?p=21108398#post21108398
Whats new :
Face Unlock
Galaxy Note Unlock Screen
Galaxy S2 Video Editor
You can take photo when recording video
Browser is faster
Ram usage a bit higher
Stock_XXJVU_Odin.Bl.zip <----LINK
Code:
# begin build properties
# autogenerated by buildinfo.sh
ro.build.id=GINGERBREAD
ro.build.display.id=GINGERBREAD.XXJVU
ro.build.version.incremental=XXJVU
ro.build.version.sdk=10
ro.build.version.codename=REL
ro.build.version.release=2.3.6
ro.build.date=Thu Dec 29 16:42:13 KST 2011
ro.build.date.utc=1325144533
ro.build.type=user
ro.build.user=se.infra
ro.build.host=SEI-22
ro.build.tags=release-keys
ro.product.model=GT-I9000
ro.product.brand=samsung
ro.product.name=GT-I9000
ro.product.device=GT-I9000
ro.product.board=GT-I9000
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product.manufacturer=samsung
ro.product.locale.language=en
ro.product.locale.region=GB
ro.wifi.channels=
ro.board.platform=s5pc110
# ro.build.product is obsolete; use ro.product.device
ro.build.product=GT-I9000
# Do not try to parse ro.build.description or .fingerprint
ro.build.description=GT-I9000-user 2.3.6 GINGERBREAD XXJVU release-keys
ro.build.fingerprint=samsung/GT-I9000/GT-I9000:2.3.6/GINGERBREAD/XXJVU:user/release-keys
# Samsung Specific Properties
ro.build.PDA=I9000XXJVU
ro.build.hidden_ver=I9000XXJVU
ro.build.changelist=851880
ro.flash.resolution=720
# end build properties
#
# system.prop for smdkc110
#
rild.libpath=/system/lib/libsec-ril.so
rild.libargs=-d /dev/ttyS0
ro.sf.lcd_density=240
dalvik.vm.heapsize=64m
ro.opengles.version=131072
# Samsung USB default mode
persist.service.usb.setting=0
#
# ADDITIONAL_BUILD_PROPERTIES
#
ro.opengles.version=131072
ro.config.ringtone=01_Minimal_tone.ogg
ro.config.notification_sound=01_Sherbet.ogg
ro.config.alarm_alert=Good_Morning.ogg
ro.url.legal=http://www.google.com/intl/%s/mobile/android/basic/phone-legal.html
ro.url.legal.android_privacy=http://www.google.com/intl/%s/mobile/android/basic/privacy.html
ro.com.google.locationfeatures=1
ro.setupwizard.mode=DISABLED
ro.com.google.gmsversion=2.3_r7
wifi.interface=eth0
wifi.supplicant_scan_interval=15
ro.secdevenc=true
ro.error.receiver.default=com.samsung.receiver.error
keyguard.no_require_sim=true
ro.com.android.dateformat=MM-dd-yyyy
ro.com.android.dataroaming=true
ro.ril.hsxpa=1
ro.ril.gprsclass=10
ro.config.notification_sound=OnTheHunt.ogg
ro.config.alarm_alert=Alarm_Classic.ogg
media.stagefright.enable-player=false
media.stagefright.enable-meta=false
media.stagefright.enable-scan=false
media.stagefright.enable-http=true
media.stagefright.enable-rtsp=false
dev.sfbootcomplete=0
dalvik.vm.dexopt-flags=m=y
net.bt.name=Android
dalvik.vm.stack-trace-file=/data/anr/traces.txt
Code:
PDA=XXJVU
MODEM=XXJVU
CSC=OXAJVU
I9000XXJVU build date = December 29 2011.
Android version = Android 2.3.6
Changelist: 851880
CREDIT:
Samsung
Google
BHuvan goyal for checking new stuff in the FW his thread here
Click to expand...
Click to collapse
thanx
downloading.....
So this is newer than JW1?
Any obvious differences?
djb77 said:
So this is newer than JW1?
Any obvious differences?
Click to expand...
Click to collapse
Name .....until no one flashes it , this is the only obvious difference. Lols.
Link is up
this is value pack!!!!!
download not working for me
Awesome !!!! trying now.
koooowweeee said:
download not working for me
Click to expand...
Click to collapse
works here
Hi Perka! So what's the changelog?! Sorry for being lazy and not flashing it cuz right now I have a decent set-up here...So...
1. Face unlock? 2. Browser? Any other change?
whats new on jvu except face unlock?
This is the value pack? The only news are the lockscreens and photo editor?
Good work Samsung!! -.-
Btw Samsung confirm that they not release nothing for Galaxy S finally...
Enviado desde mi Alcatel One Touch
Im updating OP as we find new stuff
Guys update - better camera quality. And faster snapping of pics.
This is never the Value Pack.
The Value Pack should based on Android 4
and not on Gingerbread.
PrimeDeluxe said:
This is never the Value Pack.
The Value Pack should based on Android 4
and not on Gingerbread.
Click to expand...
Click to collapse
No. Samsung confirmed that it would Ginger.
Enviado desde mi Alcatel One Touch
PrimeDeluxe said:
This is never the Value Pack.
The Value Pack should based on Android 4
and not on Gingerbread.
Click to expand...
Click to collapse
ok so its not lol, what is it then?
What the hell is going on? Samsung said there wouldn't be a value pack so how on earth does this rom exist?
Perka said:
ok so its not lol, what is it then?
Click to expand...
Click to collapse
Samsung accidentally added this face unlock and new libs and tons of new features. There mistake.....maybe there employees were too drunk.....u never know.
It´s a Stock Rom = General Section not Development
and http://www.xda-developers.com/andro...ing-value-pack-instead-of-ice-cream-sandwich/
cspiby said:
What the hell is going on? Samsung said there wouldn't be a value pack so how on earth does this rom exist?
Click to expand...
Click to collapse
Hmmm.....maybe they made it......then because of some bug they cancelled it. I hope we find that bug and eliminate it.
Hey
Basically alot of apps in the market do not show up in the market because they are not compatible with the galaxy y. An example is scramble with firends" which doesnt show up in the market however i downloaded it and it worked on my phone but first i had to change the resolution from the default 120 to 100 using an app (my phone is rooted but i still have stock rom). Now i was wondering whether if i could clear the cache and data for the market.apk while my phone was set to 100dpi then would the market show all the apps that are not compatible with my phone because of the dpi? However the only problem is i can not find the market.apk in the list of all my apps??? I was wondering how do i get it to appear on the galaxy y like it does on other android phones/tablets???
Please help with this?
you need to edit your build.prop,
this is very risky but will detect your phone as another device and not SGY
example of build.prop:
# begin build properties
# autogenerated by buildinfo.sh
ro.build.id=GINGERBREAD
ro.build.display.id=MerrukUltimateRom BETA
ro.build.version.incremental=DXKL2
ro.build.version.sdk=10
ro.build.version.codename=REL
ro.build.version.release=2.3.6
ro.build.date=Mon 16 Jan 19:22:01 KST 2011
ro.build.date.utc=1323944521
ro.build.tags=release-keys
ro.product.model=GT-S5360 <----change here
ro.product.brand=samsung
ro.product.name=GT-S5360 <----change here
ro.product.device=GT-S5360 <----change here
ro.product.board=totoro
ro.product.cpu.abi=armeabi
ro.product.manufacturer=samsung
ro.product.locale.language=en
ro.product.locale.region=GB
ro.wifi.channels=
ro.board.platform=bcm21553
# ro.build.product is obsolete; use ro.product.device
ro.build.product=GT-S5360 <----change here
# Do not try to parse ro.build.description or .fingerprint
ro.build.description=GT-S5360<----change here-user 2.3.6 GINGERBREAD DXKL2 release-keys
ro.build.fingerprint=samsung/GT-S5360/GT-S5360:2.3.6/GINGERBREAD/DXKL2:user/release-keys
# Samsung Specific Properties
ro.build.PDA=S5360DXKL2
ro.build.hidden_ver=S5360DXKL2
ro.build.changelist=0000
ro.build.buildtag=
# end build properties
#
# system.prop for GT-S5360<----change here
#
# SEC_USE_SIPC : if SEC_USE_SIPC is on, enable libsec-ril.so and block libbrcm_ril.so
#rild.libpath=/system/lib/libsec-ril.so
rild.libpath=/system/lib/libbrcm_ril.so
rild.libargs=-d /dev/smd0
persist.rild.nitz_plmn=
persist.rild.nitz_long_ons_0=
persist.rild.nitz_long_ons_1=
persist.rild.nitz_long_ons_2=
persist.rild.nitz_long_ons_3=
persist.rild.nitz_short_ons_0=
persist.rild.nitz_short_ons_1=
persist.rild.nitz_short_ons_2=
persist.rild.nitz_short_ons_3=
DEVICE_PROVISIONED=1
#debug.sf.hw=1
debug.composition.type=mdp
dalvik.vm.heapsize=64m
ro.sf.lcd_density=120
#media.stagefright.enable-player=false
# The OpenGL ES API level that is natively supported by this device.
# This is a 16.16 fixed point number
ro.opengles.version = 131072
ro.media.enc.hprof.file.format=3gp
ro.media.enc.lprof.file.format=3gp
ro.media.enc.hprof.codec.vid=m4v
ro.media.enc.lprof.codec.vid=h263
ro.media.enc.hprof.codec.aud=aac
ro.media.enc.lprof.codec.aud=amrnb
ro.media.enc.hprof.vid.width=352
ro.media.enc.lprof.vid.width=176
ro.media.enc.hprof.vid.height=288
ro.media.enc.lprof.vid.height=144
ro.media.enc.hprof.vid.fps=30
ro.media.enc.lprof.vid.fps=30
ro.media.enc.hprof.vid.bps=384000
ro.media.enc.lprof.vid.bps=192000
ro.media.enc.hprof.aud.bps=23450
ro.media.enc.lprof.aud.bps=23450
ro.media.enc.hprof.aud.ch=1
ro.media.enc.lprof.aud.ch=1
ro.media.enc.hprof.aud.hz=8000
ro.media.enc.lprof.aud.hz=8000
ro.media.cam.preview.fps=15
dalvik.vm.jniopts=warnonly
net.streaming.rtsp.uaprof=http://wap.samsungmobile.com/uaprof/GT-S5360.xml<----change here
#
# ADDITIONAL_BUILD_PROPERTIES
#
ro.url.legal=http://www.google.com/intl/%s/mobile/android/basic/phone-legal.html
ro.url.legal.android_privacy=http://www.google.com/intl/%s/mobile/android/basic/privacy.html
ro.com.google.locationfeatures=1
ro.setupwizard.mode=DISABLED
ro.com.google.clientidbase=android-samsung
ro.com.google.gmsversion=2.3_r8
ro.config.notification_sound=13_Whistle_Default_message.ogg
ro.config.alarm_alert=1_Good_Morning.ogg
alsa.mixer.playback.master=Speaker
alsa.mixer.capture.master=Mic
alsa.mixer.playback.earpiece=Earpiece
alsa.mixer.capture.earpiece=Mic
alsa.mixer.playback.headset=Headset
alsa.mixer.capture.headset=Mic
alsa.mixer.playback.speaker=Speaker
alsa.mixer.capture.speaker=Mic
alsa.mixer.playback.bt.sco=BTHeadset
alsa.mixer.capture.bt.sco=BTHeadset
alsa.mixer.playback.bt.a2dp=BTHeadset
alsa.mixer.capture.bt.a2dp=BTHeadset
dev.sfbootcomplete=0
keyguard.no_require_sim=true
ro.config.ringtone=Over_the_horizon_Default_ringtone.ogg
ro.config.notification_sound=13_Whistle_Default_message.ogg
ro.config.alarm_alert=Alarm_Buzzer.ogg
ro.opengles.version=131072
ro.com.google.clientidbase=android-samsung
+=wifi.interface=wl0.1
ro.error.receiver.default=com.samsung.receiver.error
net.bt.name=Android
dalvik.vm.stack-trace-file=/data/anr/traces.txt
Click to expand...
Click to collapse
Thanks
But are you sure i don't need to clear the data of the market.apk first since i saw a thread which is similar to what you told me above but it says to clear market.apk data but i cant find this market.apk. instead does it mean the google play.apk???
its risky so ill make a backup of the build.prop but should i also make a nandroid backup? the only problem is i cant make a nandroid backup via the recovery mode?
rezler said:
Thanks
But are you sure i don't need to clear the data of the market.apk first since i saw a thread which is similar to what you told me above but it says to clear market.apk data but i cant find this market.apk. instead does it mean the google play.apk???
its risky so ill make a backup of the build.prop but should i also make a nandroid backup? the only problem is i cant make a nandroid backup via the recovery mode?
Click to expand...
Click to collapse
stock recovery does not have a back up feature
try cwm recovery instead
deathnotice01 said:
you need to edit your build.prop,
this is very risky but will detect your phone as another device and not SGY
[/size]
Click to expand...
Click to collapse
I tried it just now by replacing all the"GT-S5360" with "GT-I9100" but it didn't work. What should i change it to? please reply
rezler said:
I tried it just now by replacing all the"GT-S5360" with "GT-I9100" but it didn't work. A also cleared the data and cache in the google play??? Why hasn't this worked? Was i meant to replace it all with something else?
Click to expand...
Click to collapse
You can replace them by writing 'Nexus S' too...
Sent from heaven!
Hey2
What's build.prop for xperia QVGA types?
Sorry for my bad english
Sent from my Desire HD using xda premium
hmmm it still wont work, the apps are still not showing up. Can someone plz provided a edited build.prop file that should work plz or just provide the edited lines?
thanks
You can use chainfire 3d and fix market setting. Demolition inc THD will show up but not work on me
Sent from my Desire HD using xda premium
Use blackmarket and apktop to download apps
Sent from my GT-S5360 using XDA
http://codekiem.com/apk-downloader
try this one.
Now, i wonder if we can use the build prompts from the sprint note 2 on our att phone no more galaxy nexus build prompts.
http://www.androidguys.com/2013/05/...ort/?utm_medium=referral&utm_source=pulsenews
With ISIS being an epic fail, I can't believe that ATT has not done this yet.
Lets hope our great devs can find some value in the code, and hopefully hook us up.....g
Ok well my buddy just change his build prob to the sprint values and his wallet is working
Sent from my SAMSUNG-SGH-I317 using Tapatalk 2
Andrew149 said:
Ok well my buddy just change his build prob to the sprint values and his wallet is working
Sent from my SAMSUNG-SGH-I317 using Tapatalk 2
Click to expand...
Click to collapse
Wow could it be that simple???
Andrew149 said:
Ok well my buddy just change his build prob to the sprint values and his wallet is working
Sent from my SAMSUNG-SGH-I317 using Tapatalk 2
Click to expand...
Click to collapse
Well.. your buddy is one lucky one.
I tried and it does not work.. it stops at "Device set up failed".
Funny thing is when I was checking my wallet from wallet.google.com, my phone was registered as Galaxy Nexus. My wallet was working once using Galaxy Nexus build prop to set up.
So mine was working with the galaxy nexus settings, I ran the script to revert it to the stock SkyNote values (SkyNote google wallet finalize). At this point google wallet does not open. I then replaced the 5 places that say t0lteatt with t0ltespr, reboot (you have to reboot for build.prop changes) and it works. Still says unsupported device but opens and appears functional. I didn't try gwallet before this update happened
Here is my build.prop:
# begin build properties
# autogenerated by buildinfo.sh
ro.build.id= JZO54K
ro.build.display.id=SkyNote 8
ro.build.version.incremental=I317UCAMA4
ro.build.version.sdk=16
ro.build.version.codename=REL
ro.build.version.release=4.1.2
ro.build.date=Fri Jan 18 11:30:14 KST 2013
ro.build.date.utc=1358476214
ro.build.type=user
ro.build.user=se.infra
ro.build.host=SEP-80
ro.build.tags=release-keys
ro.product.model=SAMSUNG-SGH-I317
ro.product.brand=samsung
ro.product.name=
t0ltespr
ro.product.device=t0ltespr
ro.product.board=smdk4x12
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product_ship=true
ro.product.manufacturer=samsung
ro.product.locale.language=en
ro.product.locale.region=GB
ro.wifi.channels=
ro.board.platform=exynos4
# ro.build.product is obsolete; use ro.product.device
ro.build.product= t0ltespr
# Do not try to parse ro.build.description or .fingerprint
ro.build.description=t0ltespr-user 4.1.2 JZO54K I317UCAMA4 release-keys
ro.build.fingerprint=samsung/t0ltespr/t0ltespr:4.1.2/ JZO54K /I317UCAMA4:user/release-keys
ro.build.characteristics=att
# Samsung Specific Properties
ro.build.PDA=I317UCAMA4
ro.build.hidden_ver=I317UCAMA4
ro.build.changelist=578342
# end build properties
#
# system.prop for smdk4x12
#
rild.libpath=/system/lib/libril-qc-qmi-1.so
rild.libargs=-d /dev/ttyS0
ro.sf.lcd_density=320
ro.lcd_min_brightness=15
ro.kernel.qemu=0
ro.tvout.enable=true
persist.sys.storage_preload=1
net.streaming.rtsp.uaprof=http://wap.samsungmobile.com/uaprof/
# Multimedia property for Smart View
media.enable-commonsource=true
# System property ril adb log on
persist.radio.adb_log_on=1
# System property for SIM
persist.radio.apm_sim_not_pwdn=1
# System property for Default touch key light duration
ro.button_key_light=6000
# System proverty for sys info indication
persist.radio.add_power_save=1
#
# ADDITIONAL_BUILD_PROPERTIES
#
ro.opengles.version=131072
debug.hwui.render_dirty_regions=false
ro.sf.lcd_density=320
ro.error.receiver.default=com.samsung.receiver.error
dalvik.vm.heapstartsize=8m
dalvik.vm.heapgrowthlimit=192m
dalvik.vm.heapsize=512m
dalvik.vm.heaptargetutilization=0.75
dalvik.vm.heapminfree=512k
dalvik.vm.heapmaxfree=8m
ro.hdcp2.rx=tz
ro.secwvk=220
ro.sec.fle.encryption=true
ro.config.ringtone=Dance_alone.ogg
ro.config.notification_sound=Fluorine.ogg
ro.config.alarm_alert=Walk_in_the_forest.ogg
ro.config.media_sound=Media_preview_Touch_the_light.ogg
ro.monkey=0
keyguard.no_require_sim=true
ro.com.android.dateformat=MM-dd-yyyy
ro.carrier=unknown
ro.com.google.clientidbase=android-samsung
ro.ril.hsxpa=1
ro.ril.gprsclass=10
ro.adb.qemud=1
ro.setupwizard.mode=DISABLED
ro.com.google.apphider=off
ro.com.google.clientidbase.ms=android-att-us
ro.com.google.clientidbase.am=android-att-us
ro.com.google.clientidbase.yt=android-samsung
ro.com.google.clientidbase.gmm=android-samsung
ro.com.google.gmsversion=4.1_r3
dalvik.vm.dexopt-flags=m=y,v=n,o=v,u=n
dalvik.vm.execution-mode=int:jit
net.bt.name=Android
dalvik.vm.stack-trace-file=/data/anr/traces.txt
ro.HOME_APP_ADJ=1
ro.HOME_APP_MEM=7095
ro.HOME_APP_BROWSER_ADJ=1
ro.min.fling_velocity=7000
ro.max.fling_velocity=12000
ro.secure=0
ro.debuggable=1
ro.mot.proximity.delay=0
ro.lge.proximity.delay=0
ro.service.swiqi.supported=false
debug.performance.tuning=1
video.accelerate.hw=1
ro.ril.disable.power.collapse=1
ro.hdmi.enable=true
persist.adb.notify=0
persist.service.adb.enable=1
persist.service.mount.playsnd=0
persist.service.swiqi.enable=0
persist.sys.purgeable_assets=0
profiler.force_disable_err_rpt=1
profiler.force_disable_ulog=1
pm.sleep_mode=1
windowsmgr.max_events_per_sec=1200
wifi.supplicant_scan_interval=180
lpa.decode=true
lpa.use-stagefright=true
media.stagefright.enable-meta=true
media.stagefright.enable-scan=true
media.stagefright.enable-http=true
media.stagefright.enable-record=false
APP_SWITCH_DELAY_TIME=false
PROC_START_TIMEOUT=false
ro.media.enc.hprof.vid.bps=12000000
ro.media.enc.hprof.vid.bps=12000000
ro.media.enc.hprof.aud.bps=12000000
ro.media.enc.hprof.codec.vid=12000000
ro.media.enc.hprof.codec.aud=12000000
ro.media.enc.hprof.aud.hz=12000000
ro.media.dec.vid.wmv.enabled=1
ro.media.dec.aud.wma.enabled=1
ro.media.dec.aud.flac.enabled=1
ro.media.dec.vid.avi.enabled=1
persist.sys.shutdown.mode=hibernate
ro.ril.disable.fastdormancy=1
ro.ril.enable.amr.wideband=1
ro.telephony.call_ring.delay=0
ro.facelock.black_timeout=400
ro.facelock.det_timeout=1500
ro.facelock.rec_timeout=2500
ro.facelock.lively_timeout=2500
ro.facelock.est_max_time=600
ro.semc.sound_effects_enabled=true
ro.semc.xloud.supported=true
persist.service.xloud.enable=1
ro.semc.enhance.supported=true
persist.service.enhance.enable=1
ro.semc.clearaudio.supported=true
persist.service.clearaudio.enable=1
ro.sony.walkman.logger=1
persist.service.clearphase.enable=1
ro.somc.clearphase.supported=true
persist.af.resampler.quality=255
htc.audio.swalt.enable=1
htc.audio.swalt.mingain=14512
af.resampler.quality=255
debug.kill_allocating_task=0
dev.pm.dyn_samplingrate=1
ENFORCE_PROCESS_LIMIT=false
ro.wmt.blcr.enable=0
ro.ril.sensor.sleep.control=1
usb_wakeup=enable
dev.bootcomplete=0
ro.config.hw_fast_dormancy=1
ro.config.hw_power_saving=true
ro.media.enc.hprof.vid.fps=75
ro.mot.buttonlight.timeout=1
ro.config.hw_quickpoweron=true
Sent from my SAMSUNG-SGH-I317 using Tapatalk 2
I want my Wallet back... Dang it Google....
Interesting..
Anyways, a guy in Sprint Note 2 called the google, and found out they are still working to have wallet working on Sprint Note too..
So, I guess we could wait a while and see if switching build.prop to Sprint works flawlessly or not.
http://forum.xda-developers.com/showpost.php?p=41491532&postcount=302
joeavery2 said:
So mine was working with the galaxy nexus settings, I ran the script to revert it to the stock SkyNote values (SkyNote google wallet finalize). At this point google wallet does not open. I then replaced the 5 places that say t0lteatt with t0ltespr, reboot (you have to reboot for build.prop changes) and it works. Still says unsupported device but opens and appears functional. I didn't try gwallet before this update happened
Here is my build.prop:
# begin build properties
# autogenerated by buildinfo.sh
ro.build.id= JZO54K
ro.build.display.id=SkyNote 8
ro.build.version.incremental=I317UCAMA4
ro.build.version.sdk=16
ro.build.version.codename=REL
ro.build.version.release=4.1.2
ro.build.date=Fri Jan 18 11:30:14 KST 2013
ro.build.date.utc=1358476214
ro.build.type=user
ro.build.user=se.infra
ro.build.host=SEP-80
ro.build.tags=release-keys
ro.product.model=SAMSUNG-SGH-I317
ro.product.brand=samsung
ro.product.name=
t0ltespr
ro.product.device=t0ltespr
ro.product.board=smdk4x12
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product_ship=true
ro.product.manufacturer=samsung
ro.product.locale.language=en
ro.product.locale.region=GB
ro.wifi.channels=
ro.board.platform=exynos4
# ro.build.product is obsolete; use ro.product.device
ro.build.product= t0ltespr
# Do not try to parse ro.build.description or .fingerprint
ro.build.description=t0ltespr-user 4.1.2 JZO54K I317UCAMA4 release-keys
ro.build.fingerprint=samsung/t0ltespr/t0ltespr:4.1.2/ JZO54K /I317UCAMA4:user/release-keys
ro.build.characteristics=att
# Samsung Specific Properties
ro.build.PDA=I317UCAMA4
ro.build.hidden_ver=I317UCAMA4
ro.build.changelist=578342
# end build properties
#
# system.prop for smdk4x12
#
rild.libpath=/system/lib/libril-qc-qmi-1.so
rild.libargs=-d /dev/ttyS0
ro.sf.lcd_density=320
ro.lcd_min_brightness=15
ro.kernel.qemu=0
ro.tvout.enable=true
persist.sys.storage_preload=1
net.streaming.rtsp.uaprof=http://wap.samsungmobile.com/uaprof/
# Multimedia property for Smart View
media.enable-commonsource=true
# System property ril adb log on
persist.radio.adb_log_on=1
# System property for SIM
persist.radio.apm_sim_not_pwdn=1
# System property for Default touch key light duration
ro.button_key_light=6000
# System proverty for sys info indication
persist.radio.add_power_save=1
#
# ADDITIONAL_BUILD_PROPERTIES
#
ro.opengles.version=131072
debug.hwui.render_dirty_regions=false
ro.sf.lcd_density=320
ro.error.receiver.default=com.samsung.receiver.error
dalvik.vm.heapstartsize=8m
dalvik.vm.heapgrowthlimit=192m
dalvik.vm.heapsize=512m
dalvik.vm.heaptargetutilization=0.75
dalvik.vm.heapminfree=512k
dalvik.vm.heapmaxfree=8m
ro.hdcp2.rx=tz
ro.secwvk=220
ro.sec.fle.encryption=true
ro.config.ringtone=Dance_alone.ogg
ro.config.notification_sound=Fluorine.ogg
ro.config.alarm_alert=Walk_in_the_forest.ogg
ro.config.media_sound=Media_preview_Touch_the_light.ogg
ro.monkey=0
keyguard.no_require_sim=true
ro.com.android.dateformat=MM-dd-yyyy
ro.carrier=unknown
ro.com.google.clientidbase=android-samsung
ro.ril.hsxpa=1
ro.ril.gprsclass=10
ro.adb.qemud=1
ro.setupwizard.mode=DISABLED
ro.com.google.apphider=off
ro.com.google.clientidbase.ms=android-att-us
ro.com.google.clientidbase.am=android-att-us
ro.com.google.clientidbase.yt=android-samsung
ro.com.google.clientidbase.gmm=android-samsung
ro.com.google.gmsversion=4.1_r3
dalvik.vm.dexopt-flags=m=y,v=n,o=v,u=n
dalvik.vm.execution-mode=int:jit
net.bt.name=Android
dalvik.vm.stack-trace-file=/data/anr/traces.txt
ro.HOME_APP_ADJ=1
ro.HOME_APP_MEM=7095
ro.HOME_APP_BROWSER_ADJ=1
ro.min.fling_velocity=7000
ro.max.fling_velocity=12000
ro.secure=0
ro.debuggable=1
ro.mot.proximity.delay=0
ro.lge.proximity.delay=0
ro.service.swiqi.supported=false
debug.performance.tuning=1
video.accelerate.hw=1
ro.ril.disable.power.collapse=1
ro.hdmi.enable=true
persist.adb.notify=0
persist.service.adb.enable=1
persist.service.mount.playsnd=0
persist.service.swiqi.enable=0
persist.sys.purgeable_assets=0
profiler.force_disable_err_rpt=1
profiler.force_disable_ulog=1
pm.sleep_mode=1
windowsmgr.max_events_per_sec=1200
wifi.supplicant_scan_interval=180
lpa.decode=true
lpa.use-stagefright=true
media.stagefright.enable-meta=true
media.stagefright.enable-scan=true
media.stagefright.enable-http=true
media.stagefright.enable-record=false
APP_SWITCH_DELAY_TIME=false
PROC_START_TIMEOUT=false
ro.media.enc.hprof.vid.bps=12000000
ro.media.enc.hprof.vid.bps=12000000
ro.media.enc.hprof.aud.bps=12000000
ro.media.enc.hprof.codec.vid=12000000
ro.media.enc.hprof.codec.aud=12000000
ro.media.enc.hprof.aud.hz=12000000
ro.media.dec.vid.wmv.enabled=1
ro.media.dec.aud.wma.enabled=1
ro.media.dec.aud.flac.enabled=1
ro.media.dec.vid.avi.enabled=1
persist.sys.shutdown.mode=hibernate
ro.ril.disable.fastdormancy=1
ro.ril.enable.amr.wideband=1
ro.telephony.call_ring.delay=0
ro.facelock.black_timeout=400
ro.facelock.det_timeout=1500
ro.facelock.rec_timeout=2500
ro.facelock.lively_timeout=2500
ro.facelock.est_max_time=600
ro.semc.sound_effects_enabled=true
ro.semc.xloud.supported=true
persist.service.xloud.enable=1
ro.semc.enhance.supported=true
persist.service.enhance.enable=1
ro.semc.clearaudio.supported=true
persist.service.clearaudio.enable=1
ro.sony.walkman.logger=1
persist.service.clearphase.enable=1
ro.somc.clearphase.supported=true
persist.af.resampler.quality=255
htc.audio.swalt.enable=1
htc.audio.swalt.mingain=14512
af.resampler.quality=255
debug.kill_allocating_task=0
dev.pm.dyn_samplingrate=1
ENFORCE_PROCESS_LIMIT=false
ro.wmt.blcr.enable=0
ro.ril.sensor.sleep.control=1
usb_wakeup=enable
dev.bootcomplete=0
ro.config.hw_fast_dormancy=1
ro.config.hw_power_saving=true
ro.media.enc.hprof.vid.fps=75
ro.mot.buttonlight.timeout=1
ro.config.hw_quickpoweron=true
Sent from my SAMSUNG-SGH-I317 using Tapatalk 2
Click to expand...
Click to collapse
I'll add that doing just the first three didn't work. It could be only the fingerprint or description that needs to be changed.
I'll try to minimize the change then build a zip.
What I don't know atm is if you need to do any steps as you would have needed to previously or if just telling play store and google wallet that it's a sprint phone is enough.
Sent from my SAMSUNG-SGH-I317 using Tapatalk 2
I was able to download Wallet from Play Store after changing build.prop to match Sprint Note 2... even with only those 4 lines.
Problem is I keep getting "Device set up failed" message..
joeavery2 said:
I'll add that doing just the first three didn't work. It could be only the fingerprint or description that needs to be changed.
I'll try to minimize the change then build a zip.
What I don't know atm is if you need to do any steps as you would have needed to previously or if just telling play store and google wallet that it's a sprint phone is enough.
Sent from my SAMSUNG-SGH-I317 using Tapatalk 2
Click to expand...
Click to collapse
So, I changed the first three, tried a few different ways, each change I rebooted and confirmed that Google wallet would not launch. I'm posting the relevent part of the build.prop, Make sure you change all the items in RED :
Code:
ro.product.name=[COLOR="Red"]t0ltespr[/COLOR]
ro.product.device=[COLOR="red"]t0ltespr[/COLOR]
ro.product.board=smdk4x12
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product_ship=true
ro.product.manufacturer=samsung
ro.product.locale.language=en
ro.product.locale.region=GB
ro.wifi.channels=
ro.board.platform=exynos4
# ro.build.product is obsolete; use ro.product.device
ro.build.product=[COLOR="red"] t0ltespr[/COLOR]
# Do not try to parse ro.build.description or .fingerprint
ro.build.description=[COLOR="red"]t0ltespr[/COLOR]-user 4.1.2 JZO54K I317UCAMA4 release-keys
ro.build.fingerprint=samsung/[COLOR="red"]t0ltespr/t0ltespr[/COLOR]:4.1.2/ JZO54K /I317UCAMA4:user/release-keys
I tried building a Zip from it but it failed and I don't have time to mess with it ATM.
---------- Post added at 12:28 PM ---------- Previous post was at 11:41 AM ----------
Ok I removed Google wallet via the Wallet app delete from device, I then used the skynote done with wallet revert zip. I rebooted. With Build.prop still showing as a sprint device I was able to download the app, however it would not initialize, it hung. So instead I ran the SkyNote_google_wallet_step1 zip. Initialized Google wallet, Then installed the Sprint edited version of Build.prop. The last step is equivalent to what happens with the SkyNote_google_wallet_finalize.zip which only adjust the build.prop back to ATT Note from Galaxy nexus.
Basically the second step is all that changes, instead of using the finalize zip to set the build.prop to att, we need to set it to sprint. Since I currently can't get the zip to work, your stuck editing the build.prop on your own, unless someone else can manage to copy/paste it, just replace the one in the SkyNote_google_wallet_finalize.zip under system with a windows machine and try installing it.
Key thing to note. If you can get google wallet to initialize after the first step, let it finish and you'll get a notification that "google wallet is ready to use" At this point you could just leave the phone as is. The issue is that S-Pen apps won't work, as they check to see that the phone is a Note vs a Nexus. If you can't get this part to work then you have something else going on, like you un-installed google wallet incorrectly and it's locked up now. You may try the google wallet revert zip from skynote thread. It seems to me that the issue is that google wallet creates a bunch of files on the device needed to make things work properly. If they are not all deleted (un-installing the app or apk doesn't do this) then it will cause issues.
Anyway, I was able to uninstall everything, start from scratch and install it all again. I currently have the build.prop mod'd to be a sprint Note2 T0ltespr and Both Google Wallet and S-pen apps work.
Hopefully this is helpful!
joeavery2 said:
So, I changed the first three, tried a few different ways, each change I rebooted and confirmed that Google wallet would not launch. I'm posting the relevent part of the build.prop, Make sure you change all the items in RED :
Code:
ro.product.name=[COLOR="Red"]t0ltespr[/COLOR]
ro.product.device=[COLOR="red"]t0ltespr[/COLOR]
ro.product.board=smdk4x12
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product_ship=true
ro.product.manufacturer=samsung
ro.product.locale.language=en
ro.product.locale.region=GB
ro.wifi.channels=
ro.board.platform=exynos4
# ro.build.product is obsolete; use ro.product.device
ro.build.product=[COLOR="red"] t0ltespr[/COLOR]
# Do not try to parse ro.build.description or .fingerprint
ro.build.description=[COLOR="red"]t0ltespr[/COLOR]-user 4.1.2 JZO54K I317UCAMA4 release-keys
ro.build.fingerprint=samsung/[COLOR="red"]t0ltespr/t0ltespr[/COLOR]:4.1.2/ JZO54K /I317UCAMA4:user/release-keys
I tried building a Zip from it but it failed and I don't have time to mess with it ATM.
---------- Post added at 12:28 PM ---------- Previous post was at 11:41 AM ----------
Ok I removed Google wallet via the Wallet app delete from device, I then used the skynote done with wallet revert zip. I rebooted. With Build.prop still showing as a sprint device I was able to download the app, however it would not initialize, it hung. So instead I ran the SkyNote_google_wallet_step1 zip. Initialized Google wallet, Then installed the Sprint edited version of Build.prop. The last step is equivalent to what happens with the SkyNote_google_wallet_finalize.zip which only adjust the build.prop back to ATT Note from Galaxy nexus.
Basically the second step is all that changes, instead of using the finalize zip to set the build.prop to att, we need to set it to sprint. Since I currently can't get the zip to work, your stuck editing the build.prop on your own, unless someone else can manage to copy/paste it, just replace the one in the SkyNote_google_wallet_finalize.zip under system with a windows machine and try installing it.
Key thing to note. If you can get google wallet to initialize after the first step, let it finish and you'll get a notification that "google wallet is ready to use" At this point you could just leave the phone as is. The issue is that S-Pen apps won't work, as they check to see that the phone is a Note vs a Nexus. If you can't get this part to work then you have something else going on, like you un-installed google wallet incorrectly and it's locked up now. You may try the google wallet revert zip from skynote thread. It seems to me that the issue is that google wallet creates a bunch of files on the device needed to make things work properly. If they are not all deleted (un-installing the app or apk doesn't do this) then it will cause issues.
Anyway, I was able to uninstall everything, start from scratch and install it all again. I currently have the build.prop mod'd to be a sprint Note2 T0ltespr and Both Google Wallet and S-pen apps work.
Hopefully this is helpful!
Click to expand...
Click to collapse
can u give a step by step to how make google wallet work on att note 2 , with all the file u need or install
Root your phone problem solved
Sent from my SAMSUNG-SGH-I317 using xda premium
joeavery2 said:
So, I changed the first three, tried a few different ways, each change I rebooted and confirmed that Google wallet would not launch. I'm posting the relevent part of the build.prop, Make sure you change all the items in RED :
Code:
ro.product.name=[COLOR="Red"]t0ltespr[/COLOR]
ro.product.device=[COLOR="red"]t0ltespr[/COLOR]
ro.product.board=smdk4x12
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product_ship=true
ro.product.manufacturer=samsung
ro.product.locale.language=en
ro.product.locale.region=GB
ro.wifi.channels=
ro.board.platform=exynos4
# ro.build.product is obsolete; use ro.product.device
ro.build.product=[COLOR="red"] t0ltespr[/COLOR]
# Do not try to parse ro.build.description or .fingerprint
ro.build.description=[COLOR="red"]t0ltespr[/COLOR]-user 4.1.2 JZO54K I317UCAMA4 release-keys
ro.build.fingerprint=samsung/[COLOR="red"]t0ltespr/t0ltespr[/COLOR]:4.1.2/ JZO54K /I317UCAMA4:user/release-keys
I tried building a Zip from it but it failed and I don't have time to mess with it ATM.
---------- Post added at 12:28 PM ---------- Previous post was at 11:41 AM ----------
Ok I removed Google wallet via the Wallet app delete from device, I then used the skynote done with wallet revert zip. I rebooted. With Build.prop still showing as a sprint device I was able to download the app, however it would not initialize, it hung. So instead I ran the SkyNote_google_wallet_step1 zip. Initialized Google wallet, Then installed the Sprint edited version of Build.prop. The last step is equivalent to what happens with the SkyNote_google_wallet_finalize.zip which only adjust the build.prop back to ATT Note from Galaxy nexus.
Basically the second step is all that changes, instead of using the finalize zip to set the build.prop to att, we need to set it to sprint. Since I currently can't get the zip to work, your stuck editing the build.prop on your own, unless someone else can manage to copy/paste it, just replace the one in the SkyNote_google_wallet_finalize.zip under system with a windows machine and try installing it.
Key thing to note. If you can get google wallet to initialize after the first step, let it finish and you'll get a notification that "google wallet is ready to use" At this point you could just leave the phone as is. The issue is that S-Pen apps won't work, as they check to see that the phone is a Note vs a Nexus. If you can't get this part to work then you have something else going on, like you un-installed google wallet incorrectly and it's locked up now. You may try the google wallet revert zip from skynote thread. It seems to me that the issue is that google wallet creates a bunch of files on the device needed to make things work properly. If they are not all deleted (un-installing the app or apk doesn't do this) then it will cause issues.
Anyway, I was able to uninstall everything, start from scratch and install it all again. I currently have the build.prop mod'd to be a sprint Note2 T0ltespr and Both Google Wallet and S-pen apps work.
Hopefully this is helpful!
Click to expand...
Click to collapse
So you only had to change the text in red and now it's working? I have no problem editing the buildprop, I'm just unclear if there are any other lines that need to be edited.
---------- Post added at 07:27 AM ---------- Previous post was at 07:19 AM ----------
I changed all of the items in red, but when opening wallet I get an"insufficient secure element privelages for this system image (release keys)." message.
yongh said:
can u give a step by step to how make google wallet work on att note 2 , with all the file u need or install
Click to expand...
Click to collapse
Assuming you haven't had gWallet running on this device before, or you are coming from a clean install: All you need are the two files from the skynote thread, and follow his instructions (It's near the bottom on that post). Then using root explore or the like, Change the items of the build.prop that are in RED. After changing the build.prop you have to reboot for settings to take effect.
nosmohtac said:
So you only had to change the text in red and now it's working? I have no problem editing the buildprop, I'm just unclear if there are any other lines that need to be edited.
---------- Post added at 07:27 AM ---------- Previous post was at 07:19 AM ----------
I changed all of the items in red, but when opening wallet I get an"insufficient secure element privelages for this system image (release keys)." message.
Click to expand...
Click to collapse
I only changed the ones I've marked in red. I found this that may help you on the secure elements thing. Basically, from what I can tell, is you didn't reset, or didn't get a chance to reset your existing google wallet on the phone. If you use the third zip from the skynote rom thread posted above you can (should be able to) reset everything. Then start with the first step.
joeavery2 said:
So, I changed the first three, tried a few different ways, each change I rebooted and confirmed that Google wallet would not launch. I'm posting the relevent part of the build.prop, Make sure you change all the items in RED :
Code:
ro.product.name=[COLOR="Red"]t0ltespr[/COLOR]
ro.product.device=[COLOR="red"]t0ltespr[/COLOR]
ro.product.board=smdk4x12
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product_ship=true
ro.product.manufacturer=samsung
ro.product.locale.language=en
ro.product.locale.region=GB
ro.wifi.channels=
ro.board.platform=exynos4
# ro.build.product is obsolete; use ro.product.device
ro.build.product=[COLOR="red"] t0ltespr[/COLOR]
# Do not try to parse ro.build.description or .fingerprint
ro.build.description=[COLOR="red"]t0ltespr[/COLOR]-user 4.1.2 JZO54K I317UCAMA4 release-keys
ro.build.fingerprint=samsung/[COLOR="red"]t0ltespr/t0ltespr[/COLOR]:4.1.2/ JZO54K /I317UCAMA4:user/release-keys
I tried building a Zip from it but it failed and I don't have time to mess with it ATM.
---------- Post added at 12:28 PM ---------- Previous post was at 11:41 AM ----------
Ok I removed Google wallet via the Wallet app delete from device, I then used the skynote done with wallet revert zip. I rebooted. With Build.prop still showing as a sprint device I was able to download the app, however it would not initialize, it hung. So instead I ran the SkyNote_google_wallet_step1 zip. Initialized Google wallet, Then installed the Sprint edited version of Build.prop. The last step is equivalent to what happens with the SkyNote_google_wallet_finalize.zip which only adjust the build.prop back to ATT Note from Galaxy nexus.
Basically the second step is all that changes, instead of using the finalize zip to set the build.prop to att, we need to set it to sprint. Since I currently can't get the zip to work, your stuck editing the build.prop on your own, unless someone else can manage to copy/paste it, just replace the one in the SkyNote_google_wallet_finalize.zip under system with a windows machine and try installing it.
Key thing to note. If you can get google wallet to initialize after the first step, let it finish and you'll get a notification that "google wallet is ready to use" At this point you could just leave the phone as is. The issue is that S-Pen apps won't work, as they check to see that the phone is a Note vs a Nexus. If you can't get this part to work then you have something else going on, like you un-installed google wallet incorrectly and it's locked up now. You may try the google wallet revert zip from skynote thread. It seems to me that the issue is that google wallet creates a bunch of files on the device needed to make things work properly. If they are not all deleted (un-installing the app or apk doesn't do this) then it will cause issues.
Anyway, I was able to uninstall everything, start from scratch and install it all again. I currently have the build.prop mod'd to be a sprint Note2 T0ltespr and Both Google Wallet and S-pen apps work.
Hopefully this is helpful!
Click to expand...
Click to collapse
ok i try this step but still not work so im kind confuse
1. install step 1 flash and add sprint build prop then setup up wallet , but fail ,
2nd try flash remove wallet zip and try again still fail
so please tell me step by step
Ok so I got it working but it says unsupported device any one have any ideas.
jjr3211 said:
Ok so I got it working but it says unsupported device any one have any ideas.
Click to expand...
Click to collapse
Working means you actually were able to get pass "setting up payment method" screen and seeing already registered card and/or were able to add another credit card?
Unsupported Device means your phone is rooted..
Just use modaco tool kit to hide that..
dvdmkr said:
Working means you actually were able to get pass "setting up payment method" screen and seeing already registered card and/or were able to add another credit card?
Unsupported Device means your phone is rooted..
Just use modaco tool kit to hide that..
Click to expand...
Click to collapse
yes it is working as it should be. and not to sound really stupid where do I get the modaco tool kit from.
jjr3211 said:
yes it is working as it should be. and not to sound really stupid where do I get the modaco tool kit from.
Click to expand...
Click to collapse
Can someone tell all the detail to get wallet to work please
Sent from my SAMSUNG-SGH-I317 using xda premium
dvdmkr said:
Working means you actually were able to get pass "setting up payment method" screen and seeing already registered card and/or were able to add another credit card?
Unsupported Device means your phone is rooted..
Just use modaco tool kit to hide that..
Click to expand...
Click to collapse
Thanks got it all sorted out and working just got to try it out here in the next day or so. Thanks for your help.
Third time compiling for this device, I am sure there will be errors/issues...
Download : PAC(k)-man ROM 06.11.13
Standard gapps package is recommended. BaNkS gapps package is also a good choice.
This was not pretested in any way this time, so please report back promptly about any serious issues so I can try to get them resolved and so other users don't have to suffer the same fate.
I do -not- own this device so please be patient.
This is -not- straight from source, there are many manual edits(additions, changes, removals) done after the rom is finished building before I upload it.
for more information on the rom, Unjustified Dev's Epic 4g thread for pretty pictures and stuff.
Thanks to the PAC-man team for rom source
Thanks to DerTeufel for the kernel source.
Thanks to Chainfire for SuperSU
Rom source : Here
Kernel source : Here
If you still need testers I'll flash this when I get home
Sent from my SPH-L720 using xda premium
---------- Post added at 03:20 PM ---------- Previous post was at 03:17 PM ----------
Sent from my SPH-D700 using xda premium
update uploading. version 23.0.0
Effsi said:
update uploading. version 23.0.0
Click to expand...
Click to collapse
thanks again dev :good:
are halo in there?
culaponk said:
thanks again dev :good:
are halo in there?
Click to expand...
Click to collapse
yes
Effsi said:
yes
Click to expand...
Click to collapse
i wish i could get the play store to update my apps. it just hangs.....
much ram eater
and yes, halo))) great workin here.
btw on this rom have superuser and superSU, thats are normally?
thanks
Google Services seem slow
Not sure if it is just my phone or not, but Google Services seem slow. It took about an hour for the Play store to update to the new design. After that apps take forever to download. Google Now took minutes to just get through to the "Yes, I'm In" option.
Everything else seems to be working great!! Wireless, Phone calls, texts. Have not tried bluetooth yet. Not the smoothest I have seen, but my word, there are so many settings. Stayed up half the night playing with them...
culaponk said:
much ram eater
and yes, halo))) great workin here.
btw on this rom have superuser and superSU, thats are normally?
thanks
Click to expand...
Click to collapse
Ya big on ram
Uh oh did I leave supersu in too? If so I meant just for supersu
Performance on my device wasn't as good as it was in past releases for me. Hope it gets better down the line for us all.
For any of us having issues with google play store apps taking for ever to update (or not updating at all) this build.prop appears to resolve the issue. Just replace your current build.prop with this one and reboot. All credit to the OP @Effsi and Thanks for the fix!!!
# begin build properties
# autogenerated by buildinfo.sh
ro.build.id=JDQ39E
ro.build.display.id=pac_crespo4g-userdebug 4.2.2 JDQ39E eng.fc.20130611.070543 test-keys
ro.build.version.incremental=398337
ro.build.version.sdk=17
ro.build.version.codename=REL
ro.build.version.release=4.2.2
ro.build.date=Tue Jun 11 07:06:09 PDT 2013
ro.build.date.utc=1370959569
ro.build.type=userdebug
ro.build.user=fc
ro.build.host=ubuntu
ro.build.tags=test-keys
ro.product.model=Nexus S 4G
ro.product.brand=Google
ro.product.name=sojus
ro.product.device=crespo4g
ro.product.board=herring
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product.manufacturer=Samsung
ro.product.locale.language=en
ro.product.locale.region=US
ro.wifi.channels=
ro.board.platform=s5pc110
# ro.build.product is obsolete; use ro.product.device
ro.build.product=crespo4g
# Do not try to parse ro.build.description or .fingerprint
ro.build.description=sojus-user 4.1.1 JRO03C 398337 release-keys
ro.build.fingerprint=google/sojus/crespo4g:4.1.1/JRO03C/398337:user/release-keys
ro.build.characteristics=nosdcard
ro.cm.device=crespo4g
# end build properties
#
# system.prop for smdkc110
#
rild.libpath=/vendor/lib/libsec-ril.so
rild.libargs=-d /dev/ttyS0
ro.sf.lcd_density=240
ril.ecclist=911,#911,*911
#
# ADDITIONAL_BUILD_PROPERTIES
#
ro.config.ringtone=Themos.ogg
ro.config.notification_sound=Proxima.ogg
ro.config.alarm_alert=Cesium.ogg
ro.pac.version=23.0.0
ro.pacrom.version=crespo4g_PAC_JB_4.2.2-v23.0.0_20130611-070543
ro.modversion=pa_crespo4g-3.60-11JUN2013-070543
ro.pa.family=pa_hdpi
ro.pa.version=3.60
ro.papref.revision=1
ro.aokp.version=crespo4g_jb-mr1_milestone-1
ro.goo.developerid=pacman
ro.goo.rom=pacman
ro.goo.version=1370959543
ro.romstats.url=http://stats.pac-rom.com
ro.romstats.name=PacMan
ro.romstats.version=23.0.0
ro.romstats.tframe=1
ro.cdma.home.operator.numeric=310120
ro.cdma.home.operator.alpha=Sprint
ro.telephony.default_network=4
ro.wimax.interface=uwbr0
ro.opengles.version=131072
wifi.interface=wlan0
dalvik.vm.heapstartsize=5m
dalvik.vm.heapgrowthlimit=48m
dalvik.vm.heapsize=128m
dalvik.vm.heaptargetutilization=0.75
dalvik.vm.heapminfree=512k
dalvik.vm.heapmaxfree=2m
keyguard.no_require_sim=true
ro.com.android.dateformat=MM-dd-yyyy
ro.carrier=unknown
ro.ril.hsxpa=1
ro.ril.gprsclass=10
ro.adb.qemud=1
ro.rommanager.developerid=cyanogenmod
ro.url.legal=http://www.google.com/intl/%s/mobile/android/basic/phone-legal.html
ro.url.legal.android_privacy=http://www.google.com/intl/%s/mobile/android/basic/privacy.html
ro.com.google.clientidbase=android-google
ro.com.android.wifi-watchlist=GoogleGuest
ro.setupwizard.enterprise_mode=1
ro.com.android.dataroaming=false
ro.cm.version=10.1.0-RC4-crespo4g
dalvik.vm.lockprof.threshold=500
dalvik.vm.dexopt-flags=m=y
net.bt.name=Android
dalvik.vm.stack-trace-file=/data/anr/traces.txt
Click to expand...
Click to collapse
is this ROM good for everyday usage?
thanks, Etshi
jacob66 said:
is this ROM good for everyday usage?
thanks, Etshi
Click to expand...
Click to collapse
Should be as far as I know. Haven't been told about any major issues besides the market not working completely, but the fix is in this thread.
Any updates for this rom I loved running it on my Epic 4g.
jcruz767 said:
Any updates for this rom I loved running it on my Epic 4g.
Click to expand...
Click to collapse
I need to get some time to redo the building environment on my laptop again before I can update. I think I heard some thing about pac and domination merging or something...
i edited my build prop via root explorer to decrease screen ppi,,,
it worked ,, i set it to value 186 :cyclops:
but i didn't liked the change ,,,,,
so went 2 edit the value back 213... :angel:
something wrong happened after that
maybe i edited the value above it
and now after booting the samsung logo has been rotated to landscape
and it hangs out there.....................
if anyone do have same [Samsung Galaxy Note 8.0 GT-N5100]
please provide me the STOCK build.prop
from internal storage (root folder) /sytem .:good:
Did you have any luck getting a copy of the default build.prop file. Even if I could get a text copy to compare what mine is currently with what the default is I think it would help.
atifjay said:
i edited my build prop via root explorer to decrease screen ppi,,,
it worked ,, i set it to value 186 :cyclops:
but i didn't liked the change ,,,,,
so went 2 edit the value back 213... :angel:
something wrong happened after that
maybe i edited the value above it
and now after booting the samsung logo has been rotated to landscape
and it hangs out there.....................
if anyone do have same [Samsung Galaxy Note 8.0 GT-N5100]
please provide me the STOCK build.prop
from internal storage (root folder) /sytem .:good:
Click to expand...
Click to collapse
Here: https://drive.google.com/file/d/0B9QvmNs9dpD-Yl9mRUctVDA4Z28/edit?usp=sharing
Or:
# begin build properties
# autogenerated by buildinfo.sh
ro.build.id=JDQ39
ro.build.display.id=JDQ39.N5100UBCML3
ro.build.version.incremental=N5100UBCML3
ro.build.version.sdk=17
ro.build.version.codename=REL
ro.build.version.release=4.2.2
ro.build.date=Sat Dec 21 11:22:02 KST 2013
ro.build.date.utc=1387592522
ro.build.type=user
ro.build.user=se.infra
ro.build.host=SEP-131
ro.build.tags=release-keys
ro.product.model=GT-N5100
ro.product.brand=samsung
ro.product.name=kona3gub
ro.product.device=kona3g
ro.product.board=smdk4x12
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product.manufacturer=samsung
ro.product.locale.language=en
ro.product.locale.region=GB
ro.wifi.channels=
ro.board.platform=exynos4
# ro.build.product is obsolete; use ro.product.device
ro.build.product=kona3g
# Do not try to parse ro.build.description or .fingerprint
ro.build.description=kona3gub-user 4.2.2 JDQ39 N5100UBCML3 release-keys
ro.build.fingerprint=samsung/kona3gub/kona3g:4.2.2/JDQ39/N5100UBCML3:user/release-keys
ro.build.characteristics=tablet
# Samsung Specific Properties
ro.build.PDA=N5100UBCML3
ro.build.hidden_ver=N5100UBCML3
ro.build.changelist=2321387
ro.product_ship=true
ro.chipname=smdk4x12
# end build properties
#
# system.prop for smdk4x12
#
rild.libpath=/system/lib/libsec-ril.so
rild.libargs=-d /dev/ttyS0
ro.sf.hwrotation=270
ro.sf.lcd_density=213
ro.kernel.qemu=0
ro.tvout.enable=true
persist.sys.storage_preload=1
net.streaming.rtsp.uaprof=http://wap.samsungmobile.com/uaprof/
# Multimedia property for Smart View
media.enable-commonsource=true
#
# ADDITIONAL_BUILD_PROPERTIES
#
dalvik.vm.heapstartsize=8m
dalvik.vm.heapgrowthlimit=64m
dalvik.vm.heapsize=256m
dalvik.vm.heapmaxfree=8m
ro.opengles.version=131072
debug.hwui.render_dirty_regions=false
drm.service.enabled=true
dalvik.vm.heaptargetutilization=0.75
dalvik.vm.heapminfree=512k
ro.sf.lcd_density=320
ro.error.receiver.default=com.samsung.receiver.error
ro.hdcp2.rx=tz
ro.secwvk=220
ro.sec.fle.encryption=true
ro.config.ringtone=S_Over_the_horizon.ogg
ro.config.notification_sound=S_Whistle.ogg
ro.config.alarm_alert=Walk_in_the_forest.ogg
ro.config.media_sound=Media_preview_Touch_the_light.ogg
keyguard.no_require_sim=true
ro.com.android.dateformat=MM-dd-yyyy
ro.carrier=unknown
ro.com.google.clientidbase=android-samsung
ro.crypto.support=recovery_mount|others
ro.ril.hsxpa=1
ro.ril.gprsclass=10
ro.adb.qemud=1
ro.com.google.gmsversion=4.2_r3
dalvik.vm.dexopt-flags=m=y
net.bt.name=Android
dalvik.vm.stack-trace-file=/data/anr/traces.txt
Thanks, That info was a life saver for me. Somehow it appears the ro.sf.lcd_density=213 had been changed to 320 and put me into a Touchwiz failure loop.
nstocke said:
Thanks, That info was a life saver for me. Somehow it appears the ro.sf.lcd_density=213 had been changed to 320 and put me into a Touchwiz failure loop.
Click to expand...
Click to collapse
How can I correct the same issue? I have the original but how can I put it back on the device if it keeps crashing?
My device was rooted so I was able to boot into recovery mode. From there I used adb to pull the /system/build.prop file. I edited the build.prop file correcting the lines that needed to be edited. I was unable to push the file back to its original location so I pushed it to /tmp/build.prop . I then used adb to got to shell and then became su and then copied the file from /tmp/build.prop to /system/build.prop and then rebooted. The commands looked something like this:
From adb directory
adb pull /system/build.prop c:\build.prop
edited c:\build.prop
adb push c:\build.prop /tmp/build.prop
adb shell
su
cp /tmp/build.prop /system/build.prop
reboot
The above was written from memory so I hope I got it all correct.
Is recovery mode the one that has clear cache and wipe data on the menu?
---------- Post added at 10:31 PM ---------- Previous post was at 10:23 PM ----------
I got it!!!!!
Outstanding plus good memory recall
Thanks
Guys.....
I have been out from xda.........
4 a while......
But i fixed that issue in one week
Of run in January itself......
Sorry 4 the late update....!
I managed to get the odin flashable .tar
Rom package in correspondence........!....
Which has always been a life saviour 4 me....,,,,
If any bugs comes in development.....
And pros is that odin never...
Wiped me....
Just restored the system back to default (repairs.....)
Without loss of data.....
Working like an OTA update.......
@Tetraguy
Thanks......buddy ????