Develop Bugs

Dead Universal!

hi guys, after my testimonial i tried upgrading my device to wm6 with jwright rom but to failure attempts. then i tried helmi and it froze...please help...it's not recognized by the computer now through usb and cant' get it to go to bootloader...what can i do to resurrect my jasjar again?

can you get in bootloader mode ?
Power + Light Bulb + Reset ?

no i can't i'm afraid
Leies said:
can you get in bootloader mode ?
Power + Light Bulb + Reset ?
Click to expand...
Click to collapse
that's my problem that i can't enter the bootloader mode and the computer doesnt recognize my device to flash it.. there must be something that would fix it but i'm not sure what.

crooner999 said:
that's my problem that i can't enter the bootloader mode and the computer doesnt recognize my device to flash it.. there must be something that would fix it but i'm not sure what.
Click to expand...
Click to collapse
I had such problem , the only way to resolve it , to change chip on your motherboard with boot loader, or if you can find jtag connectors , you can flash it with jtag.
I resolved this problem with changing boot loader chip. 150 USD in Moscow .
this is the only way to resolve it =(
good luck..

On my Desire, screen doesn't work after debranding!!!

Hi friends,
I have very very big problem. When i have try debranded my desire, after RUU (RUU_Bravo_HTC_Europe_1.15.405.3_Radio_32.30.00.28 U_4.05.00.11_release_121865) on my Desire, screen doesn't work anymore. Just black screen now.
I cant see anymore on the screen but i can listen sounds when Android OS open on my desire.
Please help me, what i must do back open my screen for?

You have slcd screen and you installed amoled rom. Find RUU that supports slcd, install it and you are fine.

jsel said:
You have slcd screen and you installed amoled rom. Find RUU that supports slcd, install it and you are fine.
Click to expand...
Click to collapse
Ok, but how i can see my screen. i need to activate usb debugging and click HTC Sync? im trying on the black screen but couldnt do it.
please help!

NoobNazi
Thread Reported.
DON'T POST YOUR QUESTIONS IN THE DEVELOPMENT SECTION!
Do you not think the mod of this forum (Who also is a mod for 5 other devices) has better things to do than constantly moving all your '[Q] ...Desire Bricked... :'(' threads?
Thank you,
NoobNazi
(Please don't create a new thread in General/Q&A, this *should* get moved soon)

Thread moved to correct forum.
WB

alikasimoglu said:
Ok, but how i can see my screen. i need to activate usb debugging and click HTC Sync? im trying on the black screen but couldnt do it.
please help!
Click to expand...
Click to collapse
Download the RUU here. Then boot your phone in fastboot mode(Power it off(Take the battery out to be sure, make sure no USB cable is connected), power it on by pressing Power + Back key). Make sure the goldcard is inserted. Then connect the device via USB cable and run that RUU, it should update itself and you should have your SLCD back.

Dragooon123 said:
Download the RUU here. Then boot your phone in fastboot mode(Power it off(Take the battery out to be sure, make sure no USB cable is connected), power it on by pressing Power + Back key). Make sure the goldcard is inserted. Then connect the device via USB cable and run that RUU, it should update itself and you should have your SLCD back.
Click to expand...
Click to collapse
Thank you for your help, But nothing changes when i try this combinations (by pressing Power + Back key) in my desire. It is still say me "ERROR[170]: USB CONNECTION ERROR".
How can i synchronize without to see screen on desire?

Dragooon123 said:
Download the RUU here. Then boot your phone in fastboot mode(Power it off(Take the battery out to be sure, make sure no USB cable is connected), power it on by pressing Power + Back key). Make sure the goldcard is inserted. Then connect the device via USB cable and run that RUU, it should update itself and you should have your SLCD back.
Click to expand...
Click to collapse
@ Dragoon123
http://shipped-roms.com/shipped/Bra...00.28U_4.06.00.02_2_release_126984_signed.exe
the above is also SLCD compatiable rom ??

If it's from the link I gave then yes.

Thank you all.
I have solved my problem with RUU_Bravo_HTC_WWE_1.21.405.2_T2_Radio_32.41.00.32U_4.08.00.09_release_137222_signed.exe
Many thanks.

alikasimoglu said:
Thank you all.
I have solved my problem with RUU_Bravo_HTC_WWE_1.21.405.2_T2_Radio_32.41.00.32U_4.08.00.09_release_137222_signed.exe
Many thanks.
Click to expand...
Click to collapse
Please share with us how you fix your problem , as there was no screen how usb work ?
it will help a lot users
share your experience
regards

Help me assists of Dragoon123.
Firstly download RUU for SLDC here:
http://shipped-roms.com/shipped/Bra...1.00.32U_4.08.00.09_release_137222_signed.exe
Than, boot your phone in fastboot mode.
1. Power it off (Take the battery out to be sure, make sure no USB cable is connected)
2. Power it on by pressing Power + Back key). (Make sure the goldcard is inserted.)
3. Then connect the device via USB cable
4. And run that RUU which you installed, it should update itself and you should have your SLCD back.
If this version of RUU not help, try other versions also. This way will fix your problem, believe me.

Bricked/dead SGS,

Hello guys, i have a problem with my sgs .. after downgrade from jv9 to froyo i've got my sgs bricked.. cannot enter do download mode by 3 button combo and by usb jiig is well ( jig is working, checked on sgs2) only thing happening is when i connect it by usb cable to my laptop i getting info the windows cannot find the driver for it and after few seconds is disconnecting.
Any ideas how to get it back to life ?
Thanx.
ps. sorry for my english. Cherrs

What happens when you turn it on normally?
At what screen does it stop?
Can you enter recovery mode?

its totally dead.

Remove the battery, wait a few minutes ( In fact, 30 sec should be alright ) the put it back. Press power button, if you see the phone -- triangle -- pc image, then just remove the battery again, put it back and plug your jig. If you see nothing i'm almost sure your screwed.

Steps:
First Remove your battery and wait 60 seconds
Then put the battery back in
There will be a small hole in the right side of the camera like a soft reset hole
take a paper clip
insert it in the hole and wait 25 seconds while pressing it in
then go into the download mode but the volume down +home button + power button
If the button method doesn't work try using the jig
Now it should work

yaro014 said:
Hello guys, i have a problem with my sgs .. after downgrade from jv9 to froyo i've got my sgs bricked.. cannot enter do download mode by 3 button combo and by usb jiig is well ( jig is working, checked on sgs2) only thing happening is when i connect it by usb cable to my laptop i getting info the windows cannot find the driver for it and after few seconds is disconnecting.
Click to expand...
Click to collapse
Can you try running USBDeview from http://www.nirsoft.net/utils/usb_devices_view.html . You should see all your existing devices like mouse, keyboard etc. Then plug the phone in, and if it shows up in USBDeview tell me what it says in these columns for the phone device:
VendorID, ProductID, USB Class, USB SubClass
You may need a couple of tries to get all the numbers if it's disconnecting after a few seconds.
I'm interested because it could be the type of brick we are trying to fix in this thread where the bootloaders have been corrupted and it is going into processor recovery mode. We don't have a fix for you but if I'm right it will confirm that you need to get the phone reflashed by Samsung. Ask them how they do it while you're there.

hmm i cannot see any hole on the right side of the camera.. there is only connector looks like gps antenna.
i tried on 3 different batteries and i tried to take battery out for few minutes and still not work..

hmm so what if there is that bootloader fault?
this is o2 brand phone so do you think guys can i just go to o2 and say that stops working after kies upgrade or some rubbish like that ? do you think that will work ?

yaro014 said:
hmm so what if there is that bootloader fault?
this is o2 brand phone so do you think guys can i just go to o2 and say that stops working after kies upgrade or some rubbish like that ? do you think that will work ?
Click to expand...
Click to collapse
Just say to them i was updating my phones software via kies and my pc crashed because of some other application so it got interrupted in the half way now i can boot into my phone.

do you think they will accept it ? i mean .. if they will fix it and say this is my fault then i'll need to pay for this fix ?
anyone guys has experience with it ? how long it takes ?

yaro014 said:
hmm so what if there is that bootloader fault?
this is o2 brand phone so do you think guys can i just go to o2 and say that stops working after kies upgrade or some rubbish like that ? do you think that will work ?
Click to expand...
Click to collapse
Yes, they won't be able to tell what caused it, though your custom firmware could all reappear if they only reflash the bootloaders. But at least your phone will be fixed.

hmm ok but if they will know i had custom firmware they will charge me for repair ?
how log it normally takes ?
actually i was flashing the branded o2 froyo firmware while it happens.. but i got info from odin unsuccessfully flashed...
//ps
Device recognized by windows :
SEC S5PC110 Test B/D
USB\VID_04E8&PID_1234&REV_0100

yaro014 said:
hmm ok but if they will know i had custom firmware they will charge me for repair ?
how log it normally takes ?
actually i was flashing the branded o2 froyo firmware while it happens.. but i got info from odin unsuccessfully flashed...
//ps
Device recognized by windows :
SEC S5PC110 Test B/D
USB\VID_04E8&PID_1234&REV_0100
Click to expand...
Click to collapse
Try reinstalling the USB drivers from my signature.

yaro014 said:
hmm ok but if they will know i had custom firmware they will charge me for repair ?
how log it normally takes ?
actually i was flashing the branded o2 froyo firmware while it happens.. but i got info from odin unsuccessfully flashed...
//ps
Device recognized by windows :
SEC S5PC110 Test B/D
USB\VID_04E8&PID_1234&REV_0100
Click to expand...
Click to collapse
The brand market can see if u rooted the phone,
But i i also got this kind of brick, when i instaled a 9000m modem to my int i9000,
what i did i heated the phone, this is not a joke, a heated the phone used adb to enter download mode and i flashed stock 2.2 from samfirmware.com
The phone newer worked well so my provider changed the phone and didn't saw that i root it.
try adb and heating than the 3button combo.
good luck

yaro014 said:
Device recognized by windows :
SEC S5PC110 Test B/D
USB\VID_04E8&PID_1234&REV_0100
Click to expand...
Click to collapse
Yep, that confirms that your initial bootloader is trashed and the CPU has gone into USB recovery mode because it couldn't load the bootloader. The only fix currently is to get Samsung to reflash it, or get someone with a Riffbox or other JTAG equipment to fix it. Heating the phone will not help you, neither will reinstalling Samsung phone USB drivers.

yaro014 said:
hmm i cannot see any hole on the right side of the camera.. there is only connector looks like gps antenna.
i tried on 3 different batteries and i tried to take battery out for few minutes and still not work..
Click to expand...
Click to collapse
Well mate; if we are talking about the usual samsung galaxy s , when we open the lid there definitely is that small gutter with a hole in it . That little diaphragm can be pressed by a blunt pin.

Your provider should fix the phone no problem.
Sent from i9000m on cm7, with xda premium.

Try JIG it help me.
At marktplaats ( EBAY??) you can buy an usb device to help you it works great.
Search te forum "Samsung i9000 galaxy S micro USB download mode Jig"
http://forum.xda-developers.com/showthread.php?t=819551
http://cell-phones.shop.ebay.com/Ce...SB+JIG&_catref=1&_fln=1&_trksid=p3286.c0.m282

sgw hard brick

hi all, my sgw hard brick because i wrong flash kernel, any idea to unbrick.
I had tried this method , but still cant power on.
1. Unplug your phone from usb
2. Take out battery (and mini sd and sim)
3. Plug usb back into phone.
4. Hold down up and down volume keys while putting battery back into the phone.

WOW..!! You got it bro..!!
I also had a HardBrick and I'm very confused how to unbrick my SGW.
I'm looking for many thread and post about unbrick the HardBrick, but I just got same answer.
so., Solution for your problem is "Change the PDA/MainBoard"

Theres a solution on that.. just search here..

skylai82 said:
hi all, my sgw hard brick because i wrong flash kernel, any idea to unbrick.
I had tried this method , but still cant power on.
1. Unplug your phone from usb
2. Take out battery (and mini sd and sim)
3. Plug usb back into phone.
4. Hold down up and down volume keys while putting battery back into the phone.
Click to expand...
Click to collapse
eza azami said:
WOW..!! You got it bro..!!
I also had a HardBrick and I'm very confused how to unbrick my SGW.
I'm looking for many thread and post about unbrick the HardBrick, but I just got same answer.
so., Solution for your problem is "Change the PDA/MainBoard"
Click to expand...
Click to collapse
hi bro, u r correct, I go samsung service center, answer is change main board. design too bad, may be main samsung factory no send out how to re-flash phone for all samsung service center.
And samsung android system without fastboot / hboot. maybe only jtagbox can help us.
sad sad... no more support samsung, I ready change to suppot miui phone xiaomi2. cheap and powerfull hardware the android system support fastboot like sony and htc.
pre-order now...

skylai82 said:
hi bro, u r correct, I go samsung service center, answer is change main board. design too bad, may be main samsung factory no send out how to re-flash phone for all samsung service center.
And samsung android system without fastboot / hboot. maybe only jtagbox can help us.
sad sad... no more support samsung, I ready change to suppot miui phone xiaomi2. cheap and powerfull hardware the android system support fastboot like sony and htc.
pre-order now...
Click to expand...
Click to collapse
http://androidforums.com/vibrant-tips-tricks/223806-guide-fixing-bricks-odin-errors.html
NO-BOOT BRICKS
This is where your phone does NOT turn on, no combo of buttons works and power button does nothing.
DO THIS ONLY WHEN YOU PLUG IN YOUR PHONE AND NOTHING SHOWS UP ON THE SCREEN!!! If else, follow the steps from above.
This method is basically same as above, EXCEPT the way you get into Download Mode as your phone is HARD BROKEN.
1. Download all the files required in the "SOFT BRICKS" section of this post.
2. Remove everything from your phone (SD card, sim, battery).
3. Plug your phone into your computer WITHOUT the battery, as you have already taken it out in the last step.
4. Press and HOLD vol. up and vol. down.
5. As you are HOLDING these buttons, reattach your battery.
6. You should be in Download Mode.
7. Unplug phone from USB
8. Follow steps 4-8 from the "SOFT BRICKS" section.
Troubleshooting:
-Odin stuck at some random process?
*Switch to another odin
*Make sure you did NOT check repartition, if you did, just repeat all the steps over again, of course for the downloading parts, obviously.
-Phone not responsive?
*Try the hard brick section right under
-Phone stuck at Galaxy S logo screen?
*Put it in to DL mode, and run Odin again, it's just a bad install.
-All three ODIN is nonfunctional, stuck or giving "FAILED" errors?
*DO NOT CLOSE ODIN ONCE IT HAS FAILED!
*Unplug your phone
*Replug in your phone, get it into DL mode
* Unplug once it is in DL mode
*Replug and ODIN should recognize your phone
*Leave all the settings the same, then click "Start" again.

skylai82 said:
http://androidforums.com/vibrant-tips-tricks/223806-guide-fixing-bricks-odin-errors.html
NO-BOOT BRICKS
This is where your phone does NOT turn on, no combo of buttons works and power button does nothing.
DO THIS ONLY WHEN YOU PLUG IN YOUR PHONE AND NOTHING SHOWS UP ON THE SCREEN!!! If else, follow the steps from above.
This method is basically same as above, EXCEPT the way you get into Download Mode as your phone is HARD BROKEN.
1. Download all the files required in the "SOFT BRICKS" section of this post.
2. Remove everything from your phone (SD card, sim, battery).
3. Plug your phone into your computer WITHOUT the battery, as you have already taken it out in the last step.
4. Press and HOLD vol. up and vol. down.
5. As you are HOLDING these buttons, reattach your battery.
6. You should be in Download Mode.
7. Unplug phone from USB
8. Follow steps 4-8 from the "SOFT BRICKS" section.
Troubleshooting:
-Odin stuck at some random process?
*Switch to another odin
*Make sure you did NOT check repartition, if you did, just repeat all the steps over again, of course for the downloading parts, obviously.
-Phone not responsive?
*Try the hard brick section right under
-Phone stuck at Galaxy S logo screen?
*Put it in to DL mode, and run Odin again, it's just a bad install.
-All three ODIN is nonfunctional, stuck or giving "FAILED" errors?
*DO NOT CLOSE ODIN ONCE IT HAS FAILED!
*Unplug your phone
*Replug in your phone, get it into DL mode
* Unplug once it is in DL mode
*Replug and ODIN should recognize your phone
*Leave all the settings the same, then click "Start" again.
Click to expand...
Click to collapse
Is this method worked with you ?

you hold the wrong button..
while you plugin the charge/usb cable, hold power button+vol down(not both up&down,only down)+home button then put again your battery..
if it still like that just go to ssc..
Sent from my GT-I8150 using Tapatalk 2

stpdkid said:
you hold the wrong button..
while you plugin the charge/usb cable, hold power button+vol down(not both up&down,only down)+home button then put again your battery..
if it still like that just go to ssc..
Sent from my GT-I8150 using Tapatalk 2
Click to expand...
Click to collapse
Try already.. also no working....

skylai82 said:
Try already.. also no working....
Click to expand...
Click to collapse
Send for phone repair shop, repair price RM150.00
Shop girl told me change Main board, actual no! imei number still same.

skylai82 said:
Send for phone repair shop, repair price RM150.00
Shop girl told me change Main board, actual no! imei number still same.
Click to expand...
Click to collapse
Means u got cheated with a software solution since imei no change which means same board?

egagah said:
Means u got cheated with a software solution since imei no change which means same board?
Click to expand...
Click to collapse
yes.

skylai82 said:
yes.
Click to expand...
Click to collapse
Oops what happened here ? I thought I wanted to share a solution...NVM

Htc desire 320 rebooting bootloop (no recovery, no OS, no bootloader)

hi to everyone,
I have a htc desire 320 and I rooted it then flash a not compatible recovery moded and got in bootloop.
after this said the cellphone keeps restarting so I cant use the adb fastboot because its always disconnecting from computer.
I have no recovery to restore from my backup.
I have no OS to boot on.
I never had a bootloader locked or unlocked. none.
I have connecting problem to computer as adb should help.
my brain hurts and my phone is dead I think.
what should I do to just put on a recovery or unlock a bootloader I never had to bring everything back to normal ?
thanks in advance for support,
have a nice day.

mitch1490 said:
hi to everyone,
I have a htc desire 320 and I rooted it then flash a not compatible recovery moded and got in bootloop.
after this said the cellphone keeps restarting so I cant use the adb fastboot because its always disconnecting from computer.
I have no recovery to restore from my backup.
I have no OS to boot on.
I never had a bootloader locked or unlocked. none.
I have connecting problem to computer as adb should help.
my brain hurts and my phone is dead I think.
what should I do to just put on a recovery or unlock a bootloader I never had to bring everything back to normal ?
thanks in advance for support,
have a nice day.
Click to expand...
Click to collapse
Sorry this is for the desire.

Saf98 said:
Sorry this is for the desire.
Click to expand...
Click to collapse
Whats the real codename of the desire 320 is it still like bravo
I finally had pass the problem with flashing it and facing error from the CID
supercid on this model is possible?

Help
mitch1490 said:
Whats the real codename of the desire 320 is it still like bravo
I finally had pass the problem with flashing it and facing error from the CID
supercid on this model is possible?
Click to expand...
Click to collapse
Hello!
I also flashed a recovery.img which put the phone into a boot loop. I am not able to flash my backup because in SP Flash Tool my HTC Desire 320 keeps disconnecting (error 2004).
How did you manage to flash your phone? Could you please help? Or is my phone dead?
Thanks.

Avan7 said:
Hello!
I also flashed a recovery.img which put the phone into a boot loop. I am not able to flash my backup because in SP Flash Tool my HTC Desire 320 keeps disconnecting (error 2004).
How did you manage to flash your phone? Could you please help? Or is my phone dead?
Thanks.
Click to expand...
Click to collapse
dear Avan7,
I managed to flash it by doing checksum checked and usb high speed without battery inside press the volume down hold it and plug <-- important in the computer the usb cable...
you click download first then press button and plug the process will begin in SP flash tool my friend have a nice day....
PS: use the HTC_Desire_320_V01_U_K44_SENSE53_htc_europe_1.00.401.3_by_jamesjerss.zip
its the rom I used and working perfectly moded from stock.
happy Christmas since im noel and have a nice day.
~no more errors peace

mitch1490 said:
dear Avan7,
I managed to flash it by doing checksum checked and usb high speed without battery inside press the volume down hold it and plug <-- important in the computer the usb cable...
you click download first then press button and plug the process will begin in SP flash tool my friend have a nice day....
PS: use the HTC_Desire_320_V01_U_K44_SENSE53_htc_europe_1.00.401.3_by_jamesjerss.zip
its the rom I used and working perfectly moded from stock.
happy Christmas since im noel and have a nice day.
~no more errors peace
Click to expand...
Click to collapse
Thanks a lot! I am going to give it a try .
Blessings.

mitch1490 said:
dear Avan7,
I managed to flash it by doing checksum checked and usb high speed without battery inside press the volume down hold it and plug <-- important in the computer the usb cable...
you click download first then press button and plug the process will begin in SP flash tool my friend have a nice day....
PS: use the HTC_Desire_320_V01_U_K44_SENSE53_htc_europe_1.00.401.3_by_jamesjerss.zip
its the rom I used and working perfectly moded from stock.
happy Christmas since im noel and have a nice day.
~no more errors peace
Click to expand...
Click to collapse
I have Tried plugging mine in holding down the down button and still just kept disconnecting and reconnecting. Is there any other way you know of to flash back to stock? or installing cwm/twrp?
I have even tried on multiple computers...

n3m37h said:
I have Tried plugging mine in holding down the down button and still just kept disconnecting and reconnecting. Is there any other way you know of to flash back to stock? or installing cwm/twrp?
I have even tried on multiple computers...
Click to expand...
Click to collapse
please try removing the battery first.

mitch1490 said:
please try removing the battery first.
Click to expand...
Click to collapse
Already tried, with battery in it boots and crashes, when plugged in without battery it just connects and disconnects over and over.
Have tried multiple cords, usb 2.0 & 3.0 ports. Same story.
Installed mediatek driver, uninstalled; you name it I tried it with the exception of opening it. Haven't got to that stage yet, I'm lazy.

n3m37h said:
Already tried, with battery in it boots and crashes, when plugged in without battery it just connects and disconnects over and over.
Have tried multiple cords, usb 2.0 & 3.0 ports. Same story.
Installed mediatek driver, uninstalled; you name it I tried it with the exception of opening it. Haven't got to that stage yet, I'm lazy.
Click to expand...
Click to collapse
if adb cant be able to be able to connect and stay connected ( bootloop or restarting problems )
then take SP Tool flasher to flash the Scatter MT6582 from stock KK by only remove battery first and let it out.
plug the universal usb port on cable but on the end of the cellphone dont plug it yet...
in SP Tool check the checkboxe in settings to checksum DL DA. and select usb high speed and W/O battery options.
then when the scatter is loaded then you ready to flash. the latest SF Tool is recommanded.
click on Download on SP tool when done the steps. it will hang on idle but at this moment press de volume down button first.
keeps holding that button until the end of flashing process and when hold it now plug the cable to your computer and bam you will be able to flash it to stock or custom your desire 320 without problems and its will not disconnect during process since you holding the volume down button.
that's how I did resolve my problem about months and find my own solution.
hope this helps... dont be shy to let me know if it worked for you or if you still need assitance.
have a nice day.
peace.

This is a forum for the HTC Desire Bravo A8181.
This is a forum for the HTC Desire Bravo A8181.
See with your own eyes.

Help please
mitch1490 said:
if adb cant be able to be able to connect and stay connected ( bootloop or restarting problems )
then take SP Tool flasher to flash the Scatter MT6582 from stock KK by only remove battery first and let it out.
plug the universal usb port on cable but on the end of the cellphone dont plug it yet...
in SP Tool check the checkboxe in settings to checksum DL DA. and select usb high speed and W/O battery options.
then when the scatter is loaded then you ready to flash. the latest SF Tool is recommanded.
click on Download on SP tool when done the steps. it will hang on idle but at this moment press de volume down button first.
keeps holding that button until the end of flashing process and when hold it now plug the cable to your computer and bam you will be able to flash it to stock or custom your desire 320 without problems and its will not disconnect during process since you holding the volume down button.
that's how I did resolve my problem about months and find my own solution.
hope this helps... dont be shy to let me know if it worked for you or if you still need assitance.
have a nice day.
peace.
Click to expand...
Click to collapse
After searching and searching, seems someone actually had the same problem as I do. But for my part even when pressing the volume down before connecting to the computer doesn't keep the phone from connecting and disconnecting, even tried all the buttons combination you can imagine.
I'm wondering if it could be a driver issue, in your case was your device disconnecting every 5 seconds? And do you have any special driver that I should be aware of, personally I have Preloader USB VCOM port version 2.0.0.0...
I hope you got something in mind, I don't know where to look anymore haha.
Thanks again
PS I did everything else, remove battery, disable signature, got scatter MT6582 + download agent for flash tool (also updated), tried with ADB but can't detect device (of course it keeps deconnecting :silly: )

Metal Addict said:
After searching and searching, seems someone actually had the same problem as I do. But for my part even when pressing the volume down before connecting to the computer doesn't keep the phone from connecting and disconnecting, even tried all the buttons combination you can imagine.
I'm wondering if it could be a driver issue, in your case was your device disconnecting every 5 seconds? And do you have any special driver that I should be aware of, personally I have Preloader USB VCOM port version 2.0.0.0...
I hope you got something in mind, I don't know where to look anymore haha.
Thanks again
PS I did everything else, remove battery, disable signature, got scatter MT6582 + download agent for flash tool (also updated), tried with ADB but can't detect device (of course it keeps deconnecting :silly: )
Click to expand...
Click to collapse
even if you have mediatek usb vcom driver or adb drivers else original driver it works on all with the button press.
but set the setting like I said USB support normal without battery W/O and high speed.
don't set it to mediatek com ports on SP tool. but if you have mediatek com port change to port 20. that's what I did change the port com.

mitch1490 said:
even if you have mediatek usb vcom driver or adb drivers else original driver it works on all with the button press.
but set the setting like I said USB support normal without battery W/O and high speed.
don't set it to mediatek com ports on SP tool. but if you have mediatek com port change to port 20. that's what I did change the port com.
Click to expand...
Click to collapse
What version of SP Flashtool are you using?

Well I have tried everything everyone has said so far
No matter what I try I get
BROM ERROR: S_BROM_DOWNLOAD_DA_FAIL (2004)
[H/W] Fail to download DA to baseband chip's internal SRAM!
Have tried using both
SP_Flash_Tool_v5.1352.01
SP-Flash-Tool-v5.1532.00
Both do the exact same thing, tried checking the AD DL ALL with Checksum boxes, unchecked usb high speed and full speed. Pressing the down button before plugging it it, after. Nothing I do seems to work, in the device manager it just keeps appearing and disappearing over and over

I think a found the solution guys. After a sleepless night , I stumble into a russian forum who got the same problems as ours.
The correct version of the SP FlashTool we need for our device is the SP_Flash_Tool_v5.1348.01_SEC (http://mediafire.com/download/eaar07r2nm1v7t6/SP_Flash_Tool_v5.1348.01_SEC.rar). I read somewhere that it was because of the HTC Desire 320 has a security boot.
If you got a 4008 error, it's probably because you're using Win8-Win10. You need Win7. I'm installing Win7 on my PC right now, so I will tell you more about it later.
If you looking for the stock roms, I found this site : http://easy-firmware.com/index.php?a=browse&b=category&id=1449
If you speak russian, feel free to correct me.
Have a good one guys.
Source: http://4pda.ru/forum/index.php?showtopic=331715&st=12120#entry40719887 (Russian)
EDIT: Alright guys, confirmed working with 0PF1IMG_V01_U_K44_SENSE52_Telus_1.02.661.2_Radio_MOLY_WR8_W1315_MD_WG_MP_V42_F1_P9_release on Windows 7 x64. Model: OPF1100
If you got a CID Error, it's probably because you have flash the wrong rom for your device. I didn't have to restore the NVRAM after this flash, but maybe you will have to.

Hi
I have desire 200 won't turn on,stay in HTC logo
I just have recovery and fastboot with hboot 1.20.0000,,,s-on
I want to flash any ROM on it
Any one help me,please?
Sent from my V3 Plus using Tapatalk

cafestrabac said:
I think a found the solution guys. After a sleepless night , I stumble into a russian forum who got the same problems as ours.
The correct version of the SP FlashTool we need for our device is the SP_Flash_Tool_v5.1348.01_SEC (mediafire.com/download/eaar07r2nm1v7t6/SP_Flash_Tool_v5.1348.01_SEC.rar). I read somewhere that it was because of the HTC Desire 320 has a security boot.
If you got a 4008 error, it's probably because you're using Win8-Win10. You need Win7. I'm installing Win7 on my PC right now, so I will tell you more about it later.
If you looking for the stock roms, I found this site : easy-firmware.com/index.php?a=browse&b=category&id=1449
If you speak russian, feel free to correct me.
Have a good one guys.
Source: 4pda.ru/forum/index.php?showtopic=331715&st=12120#entry40719887 (Russian)
EDIT: Alright guys, confirmed working with 0PF1IMG_V01_U_K44_SENSE52_Telus_1.02.661.2_Radio_MOLY_WR8_W1315_MD_WG_MP_V42_F1_P9_release on Windows 7 x64. Model: OPF1100
If you got a CID Error, it's probably because you have flash the wrong rom for your device. I didn't have to restore the NVRAM after this flash, but maybe you will have to.
Click to expand...
Click to collapse
You my friend are a gentleman and a scholar! downloaded and flashed right away and booted up Am on Win 7 x64 Pro

cafestrabac said:
I think a found the solution guys. After a sleepless night , I stumble into a russian forum who got the same problems as ours.
EDIT: Alright guys, confirmed working with 0PF1IMG_V01_U_K44_SENSE52_Telus_1.02.661.2_Radio_MOLY_WR8_W1315_MD_WG_MP_V42_F1_P9_release on Windows 7 x64. Model: OPF1100
If you got a CID Error, it's probably because you have flash the wrong rom for your device. I didn't have to restore the NVRAM after this flash, but maybe you will have to.
Click to expand...
Click to collapse
Thanks for it, i've got that problem after trying to install custom recovery. I also got the error 2004 but i fixed myself by using DA_SWSEC.bin. Not sure if it work for ur guys or not.
I also learn that althrough HTC 320 is Mt6582 devices but we cant use the method they wrote in mtkrom site to install custom recovery. Now i can find the stock rom of my phone to check flashing custom rom via splashtool. I used telus rom above and i got problem wrong CID and the flash camera not work, if i have msg or phone call missing, it flashes like notice led! At least now my phone is working ok then. I'll try to contact HTC to get stock rom of my phone

Leoisback said:
Thanks for it, i've got that problem after trying to install custom recovery. I also got the error 2004 but i fixed myself by using DA_SWSEC.bin. Not sure if it work for ur guys or not.
I also learn that althrough HTC 320 is Mt6582 devices but we cant use the method they wrote in mtkrom site to install custom recovery. Now i can find the stock rom of my phone to check flashing custom rom via splashtool. I used telus rom above and i got problem wrong CID and the flash camera not work, if i have msg or phone call missing, it flashes like notice led! At least now my phone is working ok then. I'll try to contact HTC to get stock rom of my phone
Click to expand...
Click to collapse
Yeah I forgot to mention that, you need to use the DA_SWSEC on the SP Flashtool. What's your htc 320 model? Your probably have the wrong rom. The telus one is only for NA device.
EDIT: Are you using the HTC Desire 320 with dual sim: http://drop.ndtv.com/TECH/product_database/images/15201573649PM_635_htc_desire_320.jpeg
If this is your device, the Telus rom is not for your device.
This is the EU rom: http://www.mediafire.com/download/z...NSE53_htc_europe_1.00.401.3_by_jamesjerss.zip