Related
I was trying to upgrade my XDA IIs using my card reader but when I run the file named GetBL my XDA went off and it displays "serial" at the top and "v2.07 at the bottom. How can I put everything back to normal? Is there anyone in the Philippines that could help me? Thanx...
did you try hard reset?
Yes I did but nothing happened. Will you give me a hand on this. Is there any other way to put it all back? Thanx....
dude we have the same prob ill tell u wat 2 du if i fixed it...have u tried gh?
I haven't tried it dude. What's gh dude? Will you give me a hand on this. I can't figure out what's the problem. Thanx...
gh=greenhills
do you have a usb cable?is your BA still detected by the computer when plugged using the usb cable?
I haven't tried it yet but I have a cradle and usb. But what if it's detected. What should I do? What will I also do if it's not detected. Thanx
villain08 said:
I haven't tried it yet but I have a cradle and usb. But what if it's detected. What should I do? What will I also do if it's not detected. Thanx
Click to expand...
Click to collapse
if it gets detected.. there'll be another question
does it still enter BL (bootloader mode)? haven't been playing with my BA for a long time now, that i have already forgotten how to enter BL mode..
anyway.. if it still enters BL mode.. there may still be a lot of chance reviving it..
AW! i was not able to read the very first post carefully.. you are in the BL or bootloader mode.. to return to normal phone, just reset your device (poke the reset hole at the bottom) or remove the battery, replace it, then hit the power button..
getBL or enterBL is a program that resets your device and lets it enter BL (bootloader) mode.. you need to be in the bootloader mode to be able to flash new/upgrade ROMs..
anyway.. there is a more easier and safer/faster way of flashing roms that does not include the use of the memory card technique.. you only need the USB cable/cradle, your ROM and the RUU (upgrade utility) which will be run on the desktop pc.
where are you located in the phils? maybe i can help you..
Hello guys, i have a problem with my sgs .. after downgrade from jv9 to froyo i've got my sgs bricked.. cannot enter do download mode by 3 button combo and by usb jiig is well ( jig is working, checked on sgs2) only thing happening is when i connect it by usb cable to my laptop i getting info the windows cannot find the driver for it and after few seconds is disconnecting.
Any ideas how to get it back to life ?
Thanx.
ps. sorry for my english. Cherrs
What happens when you turn it on normally?
At what screen does it stop?
Can you enter recovery mode?
its totally dead.
Remove the battery, wait a few minutes ( In fact, 30 sec should be alright ) the put it back. Press power button, if you see the phone -- triangle -- pc image, then just remove the battery again, put it back and plug your jig. If you see nothing i'm almost sure your screwed.
Steps:
First Remove your battery and wait 60 seconds
Then put the battery back in
There will be a small hole in the right side of the camera like a soft reset hole
take a paper clip
insert it in the hole and wait 25 seconds while pressing it in
then go into the download mode but the volume down +home button + power button
If the button method doesn't work try using the jig
Now it should work
yaro014 said:
Hello guys, i have a problem with my sgs .. after downgrade from jv9 to froyo i've got my sgs bricked.. cannot enter do download mode by 3 button combo and by usb jiig is well ( jig is working, checked on sgs2) only thing happening is when i connect it by usb cable to my laptop i getting info the windows cannot find the driver for it and after few seconds is disconnecting.
Click to expand...
Click to collapse
Can you try running USBDeview from http://www.nirsoft.net/utils/usb_devices_view.html . You should see all your existing devices like mouse, keyboard etc. Then plug the phone in, and if it shows up in USBDeview tell me what it says in these columns for the phone device:
VendorID, ProductID, USB Class, USB SubClass
You may need a couple of tries to get all the numbers if it's disconnecting after a few seconds.
I'm interested because it could be the type of brick we are trying to fix in this thread where the bootloaders have been corrupted and it is going into processor recovery mode. We don't have a fix for you but if I'm right it will confirm that you need to get the phone reflashed by Samsung. Ask them how they do it while you're there.
hmm i cannot see any hole on the right side of the camera.. there is only connector looks like gps antenna.
i tried on 3 different batteries and i tried to take battery out for few minutes and still not work..
hmm so what if there is that bootloader fault?
this is o2 brand phone so do you think guys can i just go to o2 and say that stops working after kies upgrade or some rubbish like that ? do you think that will work ?
yaro014 said:
hmm so what if there is that bootloader fault?
this is o2 brand phone so do you think guys can i just go to o2 and say that stops working after kies upgrade or some rubbish like that ? do you think that will work ?
Click to expand...
Click to collapse
Just say to them i was updating my phones software via kies and my pc crashed because of some other application so it got interrupted in the half way now i can boot into my phone.
do you think they will accept it ? i mean .. if they will fix it and say this is my fault then i'll need to pay for this fix ?
anyone guys has experience with it ? how long it takes ?
yaro014 said:
hmm so what if there is that bootloader fault?
this is o2 brand phone so do you think guys can i just go to o2 and say that stops working after kies upgrade or some rubbish like that ? do you think that will work ?
Click to expand...
Click to collapse
Yes, they won't be able to tell what caused it, though your custom firmware could all reappear if they only reflash the bootloaders. But at least your phone will be fixed.
hmm ok but if they will know i had custom firmware they will charge me for repair ?
how log it normally takes ?
actually i was flashing the branded o2 froyo firmware while it happens.. but i got info from odin unsuccessfully flashed...
//ps
Device recognized by windows :
SEC S5PC110 Test B/D
USB\VID_04E8&PID_1234&REV_0100
yaro014 said:
hmm ok but if they will know i had custom firmware they will charge me for repair ?
how log it normally takes ?
actually i was flashing the branded o2 froyo firmware while it happens.. but i got info from odin unsuccessfully flashed...
//ps
Device recognized by windows :
SEC S5PC110 Test B/D
USB\VID_04E8&PID_1234&REV_0100
Click to expand...
Click to collapse
Try reinstalling the USB drivers from my signature.
yaro014 said:
hmm ok but if they will know i had custom firmware they will charge me for repair ?
how log it normally takes ?
actually i was flashing the branded o2 froyo firmware while it happens.. but i got info from odin unsuccessfully flashed...
//ps
Device recognized by windows :
SEC S5PC110 Test B/D
USB\VID_04E8&PID_1234&REV_0100
Click to expand...
Click to collapse
The brand market can see if u rooted the phone,
But i i also got this kind of brick, when i instaled a 9000m modem to my int i9000,
what i did i heated the phone, this is not a joke, a heated the phone used adb to enter download mode and i flashed stock 2.2 from samfirmware.com
The phone newer worked well so my provider changed the phone and didn't saw that i root it.
try adb and heating than the 3button combo.
good luck
yaro014 said:
Device recognized by windows :
SEC S5PC110 Test B/D
USB\VID_04E8&PID_1234&REV_0100
Click to expand...
Click to collapse
Yep, that confirms that your initial bootloader is trashed and the CPU has gone into USB recovery mode because it couldn't load the bootloader. The only fix currently is to get Samsung to reflash it, or get someone with a Riffbox or other JTAG equipment to fix it. Heating the phone will not help you, neither will reinstalling Samsung phone USB drivers.
yaro014 said:
hmm i cannot see any hole on the right side of the camera.. there is only connector looks like gps antenna.
i tried on 3 different batteries and i tried to take battery out for few minutes and still not work..
Click to expand...
Click to collapse
Well mate; if we are talking about the usual samsung galaxy s , when we open the lid there definitely is that small gutter with a hole in it . That little diaphragm can be pressed by a blunt pin.
Your provider should fix the phone no problem.
Sent from i9000m on cm7, with xda premium.
Try JIG it help me.
At marktplaats ( EBAY??) you can buy an usb device to help you it works great.
Search te forum "Samsung i9000 galaxy S micro USB download mode Jig"
http://forum.xda-developers.com/showthread.php?t=819551
http://cell-phones.shop.ebay.com/Ce...SB+JIG&_catref=1&_fln=1&_trksid=p3286.c0.m282
Hello,
I need your help! My phone total bricked,
My computer suddenly shutdown when i flash my phone.
Now no led indication, can't turn on, only detect Qualcomm HS-USB QDLoader 9008 Driver.
Thanks before.
F2-SuccessoR said:
Hello,
I need your help! My phone total bricked,
My computer suddenly shutdown when i flash my phone.
Now no led indication, can't turn on, only detect Qualcomm HS-USB QDLoader 9008 Driver.
Thanks before.
Click to expand...
Click to collapse
try fastboot....see if the led turns blue..[power + vol up for fastboot]
if it turns blue...its not hard brick...flash kernel..then flash rom
How did you flash it? If you were using PC Companion or SUS, I believe the warranty may cover that.
Otherwise, let's see...
According to Google search, the Qualcomm CPU has a built-in USB download mode, which is the "Qualcomm HS-USB QDLoader 9008" that you see. When the device fails to boot it will enter this mode.
Perhaps try to enter flashmode?
Pull out the battery and wait for about a minute or so.
Insert the battery, close the back cover, then hold Volume Down key.
Insert USB cable and wait for the PC to detect it.
If the PC detects it, then flash (again)!
If the PC does not detect it or it detects as "QDLoader" again, perhaps try to pull out the battery and wait longer...
If it keeps entering "QDLoader" then your phone is really hard-bricked. It may still be possible to reflash, but we don't have the drivers and files, so just send it back to warranty, whatever.
* Just by the way, I think you can also enter the "QDLoader" mode by pressing Power + Vol Up + Vol Dn?
ansebovi said:
try fastboot....see if the led turns blue..[power + vol up for fastboot]
if it turns blue...its not hard brick...flash kernel..then flash rom
Click to expand...
Click to collapse
it turns blue for me... But where do i get kernel and rom of xperia m? I have searched on this forum but couldn't figured out yet. Any help would be appreciated
Susheel_22 said:
it turns blue for me... But where do i get kernel and rom of xperia m? I have searched on this forum but couldn't figured out yet. Any help would be appreciated
Click to expand...
Click to collapse
k np...no need of kernel i think...just flash rom..\
rom will be mention as firmware...so please dont confuse...rom and firmware are same...
download a .ftf of ur latest firmware of ur device[c1904/c1905/c2004/c2005 i think u know urs..] and flashtool...
use flashtool and flash the ftf...
u can see the firmware in xperia m android development...
for flashtool https://unrestrict.li/flashtool
guide here...
http://forum.xda-developers.com/showthread.php?t=2054486
alvinhochun said:
How did you flash it? If you were using PC Companion or SUS, I believe the warranty may cover that.
Otherwise, let's see...
According to Google search, the Qualcomm CPU has a built-in USB download mode, which is the "Qualcomm HS-USB QDLoader 9008" that you see. When the device fails to boot it will enter this mode.
Perhaps try to enter flashmode?
Pull out the battery and wait for about a minute or so.
Insert the battery, close the back cover, then hold Volume Down key.
Insert USB cable and wait for the PC to detect it.
If the PC detects it, then flash (again)!
If the PC does not detect it or it detects as "QDLoader" again, perhaps try to pull out the battery and wait longer...
If it keeps entering "QDLoader" then your phone is really hard-bricked. It may still be possible to reflash, but we don't have the drivers and files, so just send it back to warranty, whatever.
* Just by the way, I think you can also enter the "QDLoader" mode by pressing Power + Vol Up + Vol Dn?
Click to expand...
Click to collapse
Thnx all for your answer
I was tried your solution but still no solve yet. Computer only show Qualcomm HS-USB QDLoader 9008 driver. No more indication or led whatever.
I also can't entering to fastboot mode or adb mode. All button look no function.
Please more help. thnx
Sorry for my bad english
F2-SuccessoR said:
Thnx all for your answer
I was tried your solution but still no solve yet. Computer only show Qualcomm HS-USB QDLoader 9008 driver. No more indication or led whatever.
I also can't entering to fastboot mode or adb mode. All button look no function.
Please more help. thnx
Sorry for my bad english
Click to expand...
Click to collapse
i can see these 2 option for u//..as far as i know...
http://forum.xda-developers.com/showthread.php?t=2136738
http://mobiletechvideos.mybigcommerce.com/
but i cant assure u that it will unbrick..mostly they said it works...so i gave them to u...
its very risky to use both option...
its ur decision...use any option...or dont use..
or u can take ur phone to sony..they may fix it...
hope u will unbrick ur phone :fingers-crossed:
Hi I got a similar case :/ I was partitioning my sd card with Aparted but as soon as I turned off my Xperia M to reboot it it got bricked and hasn't been working since. Cant get it to into flashboot mode or flashmode to flash the original firmware. No lights or buttons are working although when I connect it to my pc it detects it in usb but not as the phone itself. Is there anyway at all I can fix this. Any help will be greatly appreciated.
For everyone with the brick situation, do you have a locked bootloader?
I know one user said they tried the volume down+insert USB cable into the computer, you did try this with PC Companion ready to repair the software?
Sony Update Service restores the bootloader on locked bootloader phones, true? If the stock bootloader is corrupt somehow, SUS could repair it.
SharpnShiny said:
For everyone with the brick situation, do you have a locked bootloader?
I know one user said they tried the volume down+insert USB cable into the computer, you did try this with PC Companion ready to repair the software?
Sony Update Service restores the bootloader on locked bootloader phones, true? If the stock bootloader is corrupt somehow, SUS could repair it.
Click to expand...
Click to collapse
My bootloader is unlocked!!
Sent from my GT-P3110 using XDA Premium 4 mobile app
ansebovi said:
try fastboot....see if the led turns blue..[power + vol up for fastboot]
if it turns blue...its not hard brick...flash kernel..then flash rom
Click to expand...
Click to collapse
I am having the same issues as well, but with my Xperia V. It doesn't come up at all. It only shows the green LED when I try to fastboot or try flash mode. Please help me to resolve. I can't stand the wait for waranty to resolve. How can I still flash custom ROM?
samokel said:
I am having the same issues as well, but with my Xperia V. It doesn't come up at all. It only shows the green LED when I try to fastboot or try flash mode. Please help me to resolve. I can't stand the wait for waranty to resolve. How can I still flash custom ROM?
Click to expand...
Click to collapse
put harge for 2-3 hrs,then download ftf of v....then try to flash using flashmode[hold vol down + power]
ansebovi said:
put harge for 2-3 hrs,then download ftf of v....then try to flash using flashmode[hold vol down + power]
Click to expand...
Click to collapse
ansebovi, thanks so much. You can't imagine how much I've trouble seeking help. My phone is now up, with the stock ROM. Can I flash a custom ROM with Flashtool?
samokel said:
ansebovi, thanks so much. You can't imagine how much I've trouble seeking help. My phone is now up, with the stock ROM. Can I flash a custom ROM with Flashtool?
Click to expand...
Click to collapse
u need to unlock bootloader first...then u can...
Hi The problem is that the phone c2005 flash mode is not the case for the moment the green light turns on and then turns off and the phone is in a state of zeus mode.
samokel said:
ansebovi, thanks so much. You can't imagine how much I've trouble seeking help. My phone is now up, with the stock ROM. Can I flash a custom ROM with Flashtool?
Click to expand...
Click to collapse
Root > Unlock your Bootloader > Flash Custom ROM from flashtool or from CWM recovery mode
This qdloader is how Sony load the phone with software in the first place. Qualcomm's version of flashmode. Afaik only OEM have access to the software for this.
Sent from my C1905 using XDA Free mobile app
plz help me
unbrick xperia m dual
hey buddy..here is the 100 % working solution
dowload these first
1. ftf file for xperia m dual c2004 - http://forum.xda-developers.com/showpost.php?p=53348374&postcount=1
2. xperia flash tool - http://sd-64701.dedibox.fr/page/news/flashtool-0.9.16.0-windows.exe-download
procedure
1) install the xperia flash tool
2) extract the 1st part of dwonloaded ftf using winzip. It will automatically extract all the other into a single file.
3) Go to the installed location of flash tool.Click divers and install necessary drivers.
4) Now run the flashtool. Click on flash icon and choose flashmode.
5) browse the ftf file u extracted and click on flash
6) now the files will be prepared for flash. A pop up appears and asks u to connect the phone.
7) turn off the device . PRESS THE VOLUME DOWN BUTTON AND THEN CONNECT TO THE PC USING USB CABLE.
8) Flashing starts to proceed.
9) After flash is complete unplug the device . Remove the battery . After few minutes insert the battery and turn on the device
10) intitial boot takes time.
:good::good:
Guys, i need help too!!!! :'(
I tried to swap my internal and my external memory by using the mothod on a video on youtube called "how to swap xperia m /dual on 4.3".
And here's what happened after I rebooted: My xperia M is stuck on the boot screen (it goes till the multicoloured wave), and then it starts up again and again and again!!!! Also, I can't get my phone to connect in flash mode when I connect it to my pc so as to install the official ftf file I've downloaded, becase when I try to connect it with my pc, the phone's led just turns up red, then green (for just some seconds), and then goes back to the booting screen!!!! I have an Xperia M single sim, rooted, with a locked bootloader!! PLEASE HELP ME, I DON'T KNOW WHAT TO DO ANYMORE!!!!! :'(
i was trying to flash lollipop rooted stuck room via qpst i was in download mood connected the phone and it reads as 9008 and i press download .. everything was fine it was loading system.img and i got this error
it says download fail firehose fail firehose fail download finish .
after this the phone is not responding to any key i press and it doesn't show when i connect it to pc and qpst can't see the device also .. i don't know what to do to unbrick it .. pls help
mohamed_ragab09 said:
i was trying to flash lollipop rooted stuck room via qpst i was in download mood connected the phone and it reads as 9008 and i press download .. everything was fine it was loading system.img and i got this error
it says download fail firehose fail firehose fail download finish .
after this the phone is not responding to any key i press and it doesn't show when i connect it to pc and qpst can't see the device also .. i don't know what to do to unbrick it .. pls help
Click to expand...
Click to collapse
Can you get into download mode?
i tried to press power + volume uo or down but nothing happen
mohamed_ragab09 said:
i tried to press power + volume uo or down but nothing happen
Click to expand...
Click to collapse
Press voulme up and connect to pc.
is there a way to get into fastboot other than power+volume down ?
via adb or something ?
mohamed_ragab09 said:
i tried to press power + volume uo or down but nothing happen
Click to expand...
Click to collapse
Try volume up+connect phone to PC. If it isn't detected try charging it for 30 minutes and then the same thing. If that doesn't work try a different USB cable and/or different USB port on your PC.
i will try and get back to you .. thank you so much i appreciate your help
mohamed_ragab09 said:
i will try and get back to you .. thank you so much i appreciate your help
Click to expand...
Click to collapse
Any news?
NeptunePH said:
Try volume up+connect phone to PC. If it isn't detected try charging it for 30 minutes and then the same thing. If that doesn't work try a different USB cable and/or different USB port on your PC.
Click to expand...
Click to collapse
i tried with no luck the phone cant be detected although it was being detected before the failed flashing attempt .. can windows 10 64 bit be the problem here ? what else can i do to unbrick the phone ?
and i get a message that the usb not recognized or malfunctioned
mohamed_ragab09 said:
and i get a message that the usb not recognized or malfunctioned
Click to expand...
Click to collapse
That sounds exactly like the situation I had. Your motherboard is probably fried. Get it to your service center. Especially if you have the warranty.
NeptunePH said:
That sounds exactly like the situation I had. Your motherboard is probably fried. Get it to your service center. Especially if you have the warranty.
Click to expand...
Click to collapse
im out of warranty .. is there is another way ? what did you do ?
in another note : i gave it to a friend who understand some maintenance and he managed make the device readable when you connect it to pc .. and it was showing 9008 on his pc .. but when i took it home and connect it to mine it shows the first time but then it started to show me usb not recognized again after i removed it .. i don't know what this means .. i gave it back to him to try make it readable again .. his pc is win 7 .. mine is win 10 .. what do you make of that ?
mohamed_ragab09 said:
im out of warranty .. is there is another way ? what did you do ?
in another note : i gave it to a friend who understand some maintenance and he managed make the device readable when you connect it to pc .. and it was showing 9008 on his pc .. but when i took it home and connect it to mine it shows the first time but then it started to show me usb not recognized again after i removed it .. i don't know what this means .. i gave it back to him to try make it readable again .. his pc is win 7 .. mine is win 10 .. what do you make of that ?
Click to expand...
Click to collapse
I was in the same situation. For me sometimes I got port 9008 and sometimes USB device not recognized. However every time I got a Sahara Fail. Keep trying to flash the s288 row with different cables/ports. That's all I can think of.
NeptunePH said:
I was in the same situation. For me sometimes I got port 9008 and sometimes USB device not recognized. However every time I got a Sahara Fail. Keep trying to flash the s288 row with different cables/ports. That's all I can think of.
Click to expand...
Click to collapse
what exactly did work for you ?
mohamed_ragab09 said:
what exactly did work for you ?
Click to expand...
Click to collapse
I tried every method possible but nothing worked. Since I was under warranty I took it to a service center where they told me the Motherboard was fried.
Oppssss mother board fried.... Im listening this first time.
he managed to make it readable again and we flashed the rom on his pc .. it went will and my p1 is on again .. thank you for the help
hi can you be speciific
mohamed_ragab09 said:
he managed to make it readable again and we flashed the rom on his pc .. it went will and my p1 is on again .. thank you for the help
Click to expand...
Click to collapse
HI.. can you get from your friend a step by step guide so that it can be useful for everyone facing the same problem..??
venkat7117 said:
HI.. can you get from your friend a step by step guide so that it can be useful for everyone facing the same problem..??
Click to expand...
Click to collapse
he just said he heated on the memory chips or something like that .. apparently the flashing problem was my win 10 device . because once the phone show 9008 com on flashing software the flash process went ok on his win 7 device
There's another thing that I would like to add. When the flashing fails and phone becomes dead(seems dead), it is not in a powered off state i.e. it actually is in a dormant state in some occasions. That is, it doesn't respond to any actions performed like plugging to pc, plugging charger e.t.c.
For older phones with a removable battery, we could simply remove the battery and turn the phone off completely before trying to flash again.
But since newer phones like our Vibe P1 doesn't have a removable battery, we need to switch the phone off manually.
There is a method for that given in this link.
Hey guys, I accidentally deleted bootloader of my Lenovo p2....doesn't turn on now...only red led blinks when connected to PC...and PC is able to detect a connected device..but can't use adb....any hope for my device?
kirtikhurana said:
https://forum.xda-developers.com/lenovo-p2/how-to/how-to-restore-lenovo-p2-hard-brick-t3652900
Click to expand...
Click to collapse
Are you able to run this:
https://www.youtube.com/watch?v=-b7bx7Dl17w
That fixed my bootloop but I didn't remove the bootloader. You might be able to get in via the USB drivers in that video URL. Qualcomm_USB_Driver_2.2.0.0_Setup dot exe
Solved
kirtikhurana said:
https://forum.xda-developers.com/lenovo-p2/how-to/how-to-restore-lenovo-p2-hard-brick-t3652900
Click to expand...
Click to collapse
Thank youuuuuu so much... It worked... When I ran the blank flash file, the phone went into fastboot and I could load the bootloader and flash the ROM and recovery again...thank you...but I'm facing a problem of charging...when I plug it in, it restarts itself and doesn't charge...Everytime I plug it in to charger, it just restarts...but thank u...it works atleast..
How did your mobile got Hard Brick ? Reason ?