Hi guys,
Please help me out here:
After I rooted and unlocked NAND on my EVO by following the guides on this forum (part 1 and part 2), my 4g connectivity is totally unreliable.
The connection switches between 4g and 3g a couple of times a minute. Sometimes the EVO will have a full 4g signal and an ip address (according to the settings app), but when I open the browser it says that there is no network connection. Switching the phone to 3g fixes the connectivity issue.
I live on the 14th floor of a high-rise and had full 4g signal before rooting. I have tried the stock ROM as well as the Bugless Beast ROM and I get the same results.
Does rooting and unlocking NAND somehow mess with the 4g radio in the EVO, anyone have this issue in the past? Please help, I don't want to take this thing back to Sprint and go for the iPhone
Have you updated the radio? Go to settings and see if you baseband is 1.39.00.05.31
4G Radio
What is your current baseband at?
you should be at 1.39.00.05.31 or higher. If you look for the Fresh .2 Rom, they have the Radio zip. reboot into recovery and flash with the new Zip it will update your Baseband radio will be updated.
I had issues with 4G connectivity I updated my radio and I am all set.
-Joshonekenobi
Yes, I just updated to the latest baseband and it's still doing the same thing.
The phone shows full signal on 4g and all of the sudden switches to 3g and back to 4g again. This occurs several times a minute.
Is there some way I can flash it back to completely stock ROM?
Thanks,
Rayden1000
i'm rooted via unrevoked and my 4g is spotty. rooted or not. for me I think its 4g not set up yet. It is a work in progress. I'm in St. Louis. Speeds suck as well.
Avg. 1.2 download 4g
Avg. 0.5 download 3g
I am in Baltimore, the first 4G market. I really don't think it has to do with coverage....before rooting (and even after rooting, when on 4G), I get about 3.6 down and 1 up (upload is capped at 1 by Sprint).
I also live in a high rise that's half a mile from Clearwire's 4G tower........my issue is that after rooting, the EVO is not locking to 4g, it keeps switching back and forth between 3g and 4g.
Rayden1000
rayden1000 said:
Yes, I just updated to the latest baseband and it's still doing the same thing.
The phone shows full signal on 4g and all of the sudden switches to 3g and back to 4g again. This occurs several times a minute.
Is there some way I can flash it back to completely stock ROM?
Thanks,
Rayden1000
Click to expand...
Click to collapse
Same issue here... Try this: go to settings and disable mobile networks (i.e. turn 3G off). When I do this, speed test works fine, but as soon as I try to do something real it disconnects and says there is no connection, even if it had a strong signal... not terribly useful!
L_Mo said:
Same issue here... Try this: go to settings and disable mobile networks (i.e. turn 3G off). When I do this, speed test works fine, but as soon as I try to do something real it disconnects and says there is no connection, even if it had a strong signal... not terribly useful!
Click to expand...
Click to collapse
L_Mo,
Were you having this issue before rooting (I am just assuming that you did root)? I swear that I did not have this issue before doing the full root and Nand unlock. When I just had Unrevoked root, I was using my Evo as my internet connection for my laptops for a full week with no issues and as a result I disconnected my Comcast cable internet.
I am just at a loss here, if I can't get this fixed, I will have to either flash the phone back to stock or take it back to Sprint for an exchange.
Rayden1000
I had the same problem after rooting. I am having better luck with Flipz stock rooted rom. I am using Flipz ota 1.32.651.6 rooted rom with the 1.39.00.05.31 radio. I wiped cache and delvic before flashing.
If this doesn't work for you you can get the stock RUU and reflash to unrooted stock.
jgarozzo said:
i'm rooted via unrevoked and my 4g is spotty. rooted or not. for me I think its 4g not set up yet. It is a work in progress. I'm in St. Louis. Speeds suck as well.
Avg. 1.2 download 4g
Avg. 0.5 download 3g
Click to expand...
Click to collapse
Unrevoked is a ***** root and couldn't possibly mess with your 4G, sorry to say!
And, to the rest of you, rooting would not mess with your signal at all unless you dropped your phone or some ****. Installing the newest radio would be my only recommendation. Or you can unroot it and try to exchange it for a different EVO.
erikjonpeterson said:
I had the same problem after rooting. I am having better luck with Flipz stock rooted rom. I am using Flipz ota 1.32.651.6 rooted rom with the 1.39.00.05.31 radio. I wiped cache and delvic before flashing.
If this doesn't work for you you can get the stock RUU and reflash to unrooted stock.
Click to expand...
Click to collapse
Thanks erikjonpeterson,
I am going to to download that ROM now.... I knew I wasn't crazy when I said that 4G worked fine before rooting. I am finding more and more info online about many people having the same issue
Rayden1000
rayden1000 said:
Thanks erikjonpeterson,
I am going to to download that ROM now.... I knew I wasn't crazy when I said that 4G worked fine before rooting. I am finding more and more info online about many people having the same issue
Rayden1000
Click to expand...
Click to collapse
I had the same issue. Reflashed the RUU and still had connection problems (good 4g signal, but use the internet and it drops and switches to 3g). Didn't have problems with my 4g data card though.
edit: I actually thought I messed something up myself before I even rooted. I was in a bad area and kept roaming even though I could get a weak Sprint signal so I switched it to Sprint only and I think I mightve messed with some other settings under that mobile network tab. What are the default settings?
So basically, something in the full rooting process (not the unrevoked one), f's up the baseband or access to the baseband? I am not an electronic engineer, but it's obvious that doing the full root messes up 4G.
Any senior members in the know have a fix for this? I already exchanged my Evo once because of several stuck pixels, it would look suspicious if I went back to the store again...
Rayden1000
rquinn19 said:
I had the same issue. Reflashed the RUU and still had connection problems (good 4g signal, but use the internet and it drops and switches to 3g). Didn't have problems with my 4g data card though.
edit: I actually thought I messed something up myself before I even rooted. I was in a bad area and kept roaming even though I could get a weak Sprint signal so I switched it to Sprint only and I think I mightve messed with some other settings under that mobile network tab. What are the default settings?
Click to expand...
Click to collapse
Default settings under Mobile Networks: Every option is checked.
Rayden1000
rayden1000 said:
So basically, something in the full rooting process (not the unrevoked one), f's up the baseband or access to the baseband? I am not an electronic engineer, but it's obvious that doing the full root messes up 4G.
Any senior members in the know have a fix for this? I already exchanged my Evo once because of several stuck pixels, it would look suspicious if I went back to the store again...
Rayden1000
Click to expand...
Click to collapse
Don't take what I said as a definite Evo or root problem. I'm curious as to if it's a 4g here in Philly problem. When I first bought the 4g card it was great, but wasn't using it so I returned it. Bought it again 4 months later and I returned that one because the 4g was terrible. I'm thinking 4g where I'm at sucks and is getting worse with more and more people jumping on it. I was a 3g early adopter so I'm not worried yet.
edit: I'm gonna go down to an area that's known to have a good 4g signal after work and sit around and do some "testing".
Which market are you in? Sprint has been doing a ton of testing in markets that aren't officially live yet.
I don't think it has anything to do with the ROM.
If when you are connected to 4G you can access the internet, only suddenly 4G it drops for no reason and switch to 3G and then reconnects to 4G and goes on and on, below is the solution. if when you are connected to 4G you can not access the internet at all, the below wont fix it for you and it is probably a problem with your rom.
You will need your msl code to fix this, loop up in the forums to to obtain your msl code from Sprint:
hit ##DATA# > Edit mode.
Put in your msl code
Chose WIMAX
Scroll down to Wimax_Idle_Sleep
Change the value from 10 to 300.
Click menu, commit changes and restart the phone.
This fixed it for me and i never drop 4g (when in good coverage) again.
Basically Sprint has some STUPID setting that tells 4g to go into "sleep mode" of no data is passed on the 4g connection after 10 seconds which is essentially disconnecting 4g.
The problem is it goes into sleep mode (disconnecting), but then rescans and look for a 4G signal > reconnects to 4g and if no data will be passed in 10sec it will do the same again in an endless loop.
10sec to put a connection into sleep mode is really low so change it to 300sec.
The odd thing is that this is only happening in certain locations and with certain towers.
I tried to call Sprint and explain about this issue but my attempts fell on death ears.
Go ahead and try the above. if it helps you please someone make this a sticky as you are not the first i see having the issue.
Valicore said:
Which market are you in? Sprint has been doing a ton of testing in markets that aren't officially live yet.
Click to expand...
Click to collapse
I am in baltimore, the first 4G market.
I have to tend to agree that something in "Part 2" is messing up something with 4G. I've done Part 1 and successfully "upped" the radio with no 4G loss. Living in $G Vegas, I would get solid 2 bars inside my office. Once I did Part 2 and redid the phone, I would get "jumping" from 3G to 4G...
I still have to wonder, when flashing the new radio, why (after Part 2) it gets "stuck" in formatting cache and you get no "confirmation" of an upgrade. I am an AnooBroid...but this just doesn't seem right to me.
(Edited) - This post is now obsolete... Teaches me to refresh the page on the Evo before posting!
i live in the DFW area, and have checked the map and should be good on the 4g signal.
Yet, on my evo, and I have only been connected to 4g maybe twice and for maybe a minute. And only after a restart of the phone. Once I push the power button to put the phone to sleep, 4g goes away, the widget sticks and 3g connects.
My widget (and in wireless settings) always says "turning on..."
i do not have a rooted phone, I have done the recent OTA update.
baseband #: 1.39.00.05.31
build is 132.651.6 - hardaware ver 0003
I have read the fourms, and it seems i already have the updated Radio version
also
I have my msl number, and I have set my idle time to 300, but that does not change anything
should I take my phone back, or wait for this "soon" to happen OTA update I've read about (not the 2.2, but the one that supposedly fixes the wi-fi stuff and updates bluetooth voice dial)?
any other suggestions?
thanks in advance.
I had a problem with 4G connecting in the DFW area after doing the OTA, and rebooting my phone fixed the problem. Have you tried that? There's also a new PRL update that may help. You should be on version 60667.
FWIW, as far as I can tell the 4G speeds in the DFW area suck ballz. Most of the time 3G works faster than 4G does for me. YMMV.
Since it is not rooted I would take it back to where you got it and see if they have had anyone has gotten a good 4g signal there. If they have it sounds like you have an issue with the 4g radio(???) and it needs to be replaced. I hope it works out for you.
thanks for the fast reply
I was having issues with my 3G cutting out randomly. I would be in a known coverage area, and in the middle of a speed test, wifi tether, or any other app requiring internet, the 3G would just stop working. The 3G icon would blink as if it was trying to reconnect, but wouldn't. I would either have to restart the device or cycle the mobile internet on and off. I would also get error code 67 and 104 randomly as well. Today, I updated my Radio to 2.15.00.05.02, but haven't really had the chance to see if it's functioning correctly. Any advice? I'm a bit of a noob, so keep it simple for me.
Sitting at home with the EVO on 3G and just got error 104 again. Running...
ANDROID 2.2
PRI 1.90_003
PRL 60672
Just updated to ANDROID 2.3 and the latest RADIO combo pack and I'm still having the issue. During SpeedTest, the 3G stops responding randomly. Sometimes it picks back up again, but most of the time, it will stop responding altogether. Settings issue? Any help would be great.
A Tower is down on Sprint (sub-Boost Mobile).
That is what's causing your in and out fades.
Should be updated by end of the week.
Boost Mobile (EVO)
Android 2.2
2.15.00.11.19 (downgraded as I thought it was radio, but will be upgradeing back to Radio 2.15.00.05.02 after Tower is repaired)
Software 3.70.651.1
PRL 61007
same problem here, but with good towers
hey guys I have the samsung epic with the same proble, it works fine and fast on 3g but sometimes it just stop working. the 3g arow keeps sending, and I get the same error codes, so, what can I do to fix this? ah my epic is on boost mobile
So others are having this issue as well. Interesting....anyone got any ideas?
Sent from my PC36100 using XDA App
I have the same problem. It has nothing to do with the towers. I am running synergy RC2 and my 3g will drop. I have to then disable the 3g and reinable it for the 3g to work. This will last for 3 minutes to 5 hours. It's very annoying. I have come to the conclusion that it is either software related or the PRL.
Some PRL's have more problems than others. It seems that the boost PRL (I think it is 61007) will be running a speed test and cut out and I get an error saying there has been a network communication error. 60678 seems to work best for me although I have to keep resetting the 3g.
I have the same issue with the Speedtest.net app. It cuts out with a network error. Anyone else got any input???
Sent from my PC36100 using XDA App
Having the same issues every hour... any thoughts?
I updated my data profile and it doesn't do it anymore.
Sent from my PC36100 using xda premium
i wish i had ur problem -.-, mines it i cant make calls or texts, says my account could not be validated, but my 3g works fine =[
Has anyone else experienced any issues with 4G not connecting after changes in data connection strength?
I'm usually riding the subway to and from work so am not really using 4G and then have WiFi as soon as I get into the office.
Took a cab this morning and had 4G during the ride but had a spot where it dropped out. The connection never picked up again unless I manually turned 4G off and back on.
Running Starburst 1.9.8
Anyone else have this issue?
well i just go the phone a few days ago and haven't rooted yet but i did manually flash the ek02 update. my phone will drop 4g and scan but after maybe 1 or 2 attempts it will not try to scan again. just noticing it so i will keep an eye on whats going on. looked at the info in ##data# and ti looks like its set to rescan every 120 seconds so not sure whats going on.
For the past week and a half, I've had internet issues when I'm on 3g. It works fine on wifi. I've switched between ROMs, kernels, modems, etc. I'm currently on Goodness with the MA6 firmware modem AIO and the anthrax kernel. I've tried updating the profile & prl. I have between 2-4 bars of 3g and yet it still gives me the webpage not available sign. I tried clearing the cache/ fixing the permissions. But the internet simply won't work. I'm in Maryland, between Baltimore and Frederick. What could the problem be? Maybe the phone itself is defective or Sprint's network died in my area?
I'd see if they're doing work i that area. I know in areas of Baltimore 4G is there, I believe. You could try using build prop tweaks ect for signal if you wanted.
Zin0 said:
For the past week and a half, I've had internet issues when I'm on 3g. It works fine on wifi. I've switched between ROMs, kernels, modems, etc. I'm currently on Goodness with the MA6 firmware modem AIO and the anthrax kernel. I've tried updating the profile & prl. I have between 2-4 bars of 3g and yet it still gives me the webpage not available sign. I tried clearing the cache/ fixing the permissions. But the internet simply won't work. I'm in Maryland, between Baltimore and Frederick. What could the problem be? Maybe the phone itself is defective or Sprint's network died in my area?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1815580&page=3
http://forum.xda-developers.com/showthread.php?t=2154344
Misery loves company.
The 2nd post is a thread I started regarding the same problem. The first post is to a thread I thought could help me. I tried some things mentioned in there but none of them worked. Then someone posted in the thread who is having the same problem.
Here's what I've been running into and what I tried. I am on FreeGS3, Anthrax kernel, and recently updated to MA6 when I started having problems. I use a battery saver so my internet connection turns off when my screen is off. I started noticing a week or so ago that when I woke up my phone, the 3g icon would appear but only the up arrow flashed. The download arrow wasn't doing anything. I would toggle it off and on and eventually get it to work. I'm in the Raleigh-Durham area and we are just starting to get LTE. My 4G works whenever I go through 4G areas and my wifi works. I have restored a working backup, wiped my phone, flashed back to stock unrooted, called Sprint (they refreshed my signal and had me do an OTA activation), manually changed my PRL, upgraded to MA6, updated profile (when I could get it work).........and I think that about sums it up. The one thing I've noticed is my phone works flawlessly when the network mode is set to CDMA. At this point I'm clueless. I really don't think it's a phone issue because 3g works on CDMA. It's like when the phone is set to CDMA/LTE and it doesn't have an LTE signal, it doesn't know what to do. That up arrow flashes in such a rhythm that it's like the code is stuck in a loop.