[KERNEL/RECOVERY][ICS] Rogue *Stock FB27* (Updated 3/5/12)

[KERNEL/RECOVERY][ICS] Rogue *Stock FB27* (Updated 3/5/12) - Samsung Epic 4G Touch

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
CWM Rogue Recovery
&
Rogue *Stock FB27* Kernel

Presented By-
TDR
Bazar6
Steady Hawkin
Important Info-
-Flashing anything for ICS is risky and could result in damage to your device. By flashing this you agree that we are not held liable.
-You will not receive any OTA after flashing this.
-Notification light will not work on CM9
-You will not be able to install apps to external sdcard on CM9 (you can still access external sdcard though)
General-
***This kernel/recovery is for use with ICS Rom's Only!***
**Also, this kernel and recovery does not install superuser or busybox, please have both installed prior to flashing.**
Rogue Recovery v1.2.2 Includes:
CWM 5.0.2.8 Base
Overhauled UI
New menus
Fewer clicks
Take a look and see what else
*See changelog
Kernel Includes:
Based on Calkulin's stock pulled FB27
Bootanimation Support
Init.d Support
*See changlog
Install Instructions-
ODIN-
-Make a nandroid in your current recovery then proceed
-Download tar from link below
-Place phone in download mode
-Open Odin and make sure only auto reboot is selected in the option list
-Click PDA and select the Rogue tar, then select start
-Let the phone boot back up fully, then reboot for best results
-Sit back and bask in the Rogue glory!
CWM-
-Make a backup in your current recovery
-Download zip from link below
-Place zip on sdcard
-Boot into recovery and install zip
-Let the phone boot back up fully, then update profile and PRL
-Reboot
-Sit back and bask in the Rogue glory!
Download-
ODIN-
Rogue Stock FB27 (Odin Tar)
CWM ZIP-
Rogue Stock FB27 (CWM Zip)
Source-
Can be found on Github- HERE
Thank You-
Koush
CyanogenMod Team
j-r0dd
Calkulin
codeworkx

Donate to Team Rogue HERE
-Follow me on Twitter/G-Plus for early releases-

-Partial Changelog-
FB27 (Official Release)
Kernel-
*Updated kernel and initramfs blobs to FB27
*Changed bootanimation handling again (note: not recommended to have both /system/bin/bootanimation and /system/bin/samsungani present at the same time)
+Replaced missing FOTA parts
*Changed dalvik-cache permissions to 773 for sbrissen-CM9
Recovery-
*Rogue v1.2.2
+Backported some recovery patches from CWM 5.5
*Adjusted recovery text layout a bit
FB21 rev2 (Official Release)
Kernel-
*Add explicit handling for /data/system to fix bootloop on factory reset (thanks Calkulin!)
Recovery-
*Rogue v1.2.1
FB21 (Official Release)
Kernel-
+Based on stock pulled FB21 (Thanks Calkulin!)
+Works on both stock ICS Touchwiz Roms and CM9
Recovery-
*Rogue v1.2.1
FB17 (Official Release)
Kernel-
+Based on stock pulled FB17 (Thanks ACS Team!)
+init.d and bootanimation support
*Adjust mount options in init.rc
*Modified init files for CM9 (C build only)
Recovery-
*Rogue v1.2.1
*Fix USB mount error
*Fix toggle options in menus
*Fix script assert toggle
**Disable assert is still broken
FB15 (Official Release)
Recovery-
***Recovery mounting is broken***
*Rogue v1.2.0
+Updated to CWM 5.0.2.8, bugfixes
+Roboto font, style changes
*Fix script assert switch
Kernel-
+Based on stock pulled FB15 (Thanks Calkulin!)
EL29 (Official Release)
Recovery-
*Rogue v1.1.2
Kernel-
+Based on EL29 stock pulled kernel (Thanks Calkulin and puertoblack2003 !)
+Based on Codeworkx's initramfs
+Init.d support
+Bootanimation support
EL26 (Official Release)
Recovery-
*Rogue v1.1.2
Kernel-
+Based on EL26 stock pulled kernel (Thanks Calkulin!)
+Based on Codeworkx's initramfs
+Init.d support
+Bootanimation support
EL13 (Official Release)
Recovery-
+Confirmation screen in low space situation
*Rogue v1.1.2
Kernel-
+Based on EL13 stock pulled kernel (Thanks Calkulin!)
+Based on Codeworkx's initramfs
+Init.d support
+Bootanimation support
EK02 (Official Release)
Recovery-
*Rogue v1.1
Kernel-
+Based on kingsway8605's stock pulled EK02 kernel
+Based on Codeworkx's initramfs
+Init.d support
+Bootanimation support
EG30 rev2 (Official Release)
Recovery-
+Based on CWR 5.0.2.7 (with old keyconfig)
+Backup/Restore on internal storage (/emmc)
+Mount internal storage over USB
Kernel-
*Remained unchanged
EG30 (Official Release)
Recovery-
+Based on CWM 5.0.2.6
+Overhauled UI
+Fewer clicks & new menus (Thanks j-r0dd)
+Battery level in conformation screen
Kernel-
+Based on Bubby's stock pulled EG30 kernel
+Based on Codeworkx's initramfs
+Init.d support
+Bootanimation support

-Archive-
-ICS-
Rogue Stock FB21 rev2 (CWM Zip)
Rogue Stock FB21 rev2 (Odin Tar)
Rogue Stock FB17 for CM9 (CWM Zip)
Rogue Stock FB17 for CM9 (Odin Tar)
Rogue Stock FB17 (CWM Zip)
Rogue Stock FB17 (Odin Tar)
Rogue Stock FB15 (CWM Zip)
Rogue Stock FB15 (Odin Tar)
-Gingerbread-
Rogue Stock EL29 (ZIP)
Rogue Stock EL29 (Odin Tar)
Rogue Stock EL26 (ZIP)
Rogue Stock EL13 (ZIP)
Rogue Stock EK02 (ZIP)

that was quick, on EL13 modem, flashing the kernel now

yep just grabbed this about to flash it in a few minutes. Thanks for the quick update Steady you rock man

Anyone else notice that the jig no longer resets the download counter or is it just me? Either way nice work Hawkin

using EL13 modem and TNz 1.3
Quadrant
Desperado - (OC 1504 on demand) 4700
EL13 stock (no OC) 4000
Net speed WIFI
Desperado - 3.91 DL/2.14UL/ping 16
EL13 stock - 14.49DL/3.39UL/ping 22
3g (on airave)
Desperado - 0.01DL/0.10UL/ ping 849
EL13 stock - 0.03DL/0.06UL/ping 308
Def improvement on WIFI (but I did upgrade modem as well), will check 3G speeds later. Stock quadrant is quite impressive

bavarianblessed said:
Anyone else notice that the jig no longer resets the download counter or is it just me?
Click to expand...
Click to collapse
Damn not good

bavarianblessed said:
Anyone else notice that the jig no longer resets the download counter or is it just me? Either way nice work Hawkin
Click to expand...
Click to collapse
This would be part of the bootloader changing I believe. What ROM/Kernel base were you running before flashing this kernel, and had you successfully used the jig with that setup? I had read about Samsung changing the bootloader on International GS2s that caused the jig to no longer work. It very well could be a 2.3.6 thing.
A solution could be to downgrade flash the EG30 full system TAR, use the jig, then use sfhub's autoroot and install CWM, then use recovery to flash your ROM, Kernel and Modem.

bavarianblessed said:
Anyone else notice that the jig no longer resets the download counter or is it just me? Either way nice work Hawkin
Click to expand...
Click to collapse
Mine worked.

I flashed Calk 's EL13 modem only, so Should I flash Rogue EL13 kernel?
Sent from my SPH-D710 using xda premium

does this stop the stock bootanimation.qmg from working?

crawrj said:
Mine worked.
Click to expand...
Click to collapse
What ROM base are you running crawrj?

zedmay said:
I flashed Calk 's EL13 modem only, so Should I flash Rogue EL13 kernel?
Sent from my SPH-D710 using xda premium
Click to expand...
Click to collapse
That's totally up to you bro. Whatever helps you get the best results. PErsonally I flashed both the kernel and the modem to EL13. Everything seems smooth

Dchibro said:
What ROM base are you running crawrj?
Click to expand...
Click to collapse
Using Calk's deodexed rom, EL13 modem and this kernel. I also cleared it on ek02 cwm kernel on the same system.

I have also flashed the new modem and Rogue kernel without any obvious unwanted side effects although I haven't really had a chance to test this out to determine if I'm experiencing any benefits.

crawrj said:
Using Calk's deodexed rom, EL13 modem and this kernel. I also cleared it on ek02 cwm kernel on the same system.
Click to expand...
Click to collapse
Ok cool. So EK02 ROM and kernel, and EL13 kernel covered and confirmed working with the jig. The only difference could be if the guy who reported it flashed the stock EL13 ROM as well, which may have changed the bootloader? If not, then it sounds like some kind of coincidence.

Dchibro said:
Ok cool. So EK02 ROM and kernel, and EL13 kernel covered and confirmed working with the jig. The only difference could be if the guy who reported it flashed the stock EL13 ROM as well, which may have changed the bootloader? If not, then it sounds like some kind of coincidence.
Click to expand...
Click to collapse
I am on el13 rom. Should have specified that.
Sent from my SPH-D710 using xda premium

crawrj said:
I am on el13 rom. Should have specified that.
Sent from my SPH-D710 using xda premium
Click to expand...
Click to collapse
Oh I see. I saw "Calk's ROM" and just assumed it was his EK02 based release. You meant his Deodex of stock EL13. Well, I'm at a loss then. Unless more people report it I'll chalk it up to an anomaly of some sort.

Dchibro said:
Oh I see. I saw "Calk's ROM" and just assumed it was his EK02 based release. You meant his Deodex of stock EL13. Well, I'm at a loss then. Unless more people report it I'll chalk it up to an anomaly of some sort.
Click to expand...
Click to collapse
Thanks for trying to get to the bottom of this. Its the only thing holding me back right now...
Sent from my SPH-D710 using xda premium

Related

[KERNEL/RECOVERY][ICS] Rogue Stock FC06 (New 3/8/12)

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
CWM Rogue Recovery
&
Rogue *Stock FC06* Kernel

Presented By-
TDR
Bazar6
Darchstar
Steady Hawkin
Discussion-
Discussion for this specific repack should be posted HERE to help keep things organized
Warning-
***DO NOT USE THIS RECOVERY TO FLASH ANY ROM***
Known Issues-
-Flashing anything for ICS is risky and could result in bricking your device. It has been said a safe bet is using stock EL26 CWR to flash. By flashing our repack you agree that we are not held liable.
-You will not receive any OTA after flashing this.
-You will not be able to install apps to external sdcard on CM9 (you can still access external sdcard though)
General-
**This kernel and recovery does not install superuser or busybox, please have both installed prior to flashing.**
Rogue Recovery v1.2.2 Includes:
CWM 5.0.2.8 Base
Overhauled UI
New menus
Fewer clicks
Take a look and see what else
*See changelog
Kernel Includes:
Based on Calkulin's stock pulled FC06
Bootanimation Support
Init.d Support
*See changlog
Install Instructions-
ODIN-
-Make a nandroid in your current recovery then proceed
-Download tar from link below
-Place phone in download mode
-Open Odin and make sure only auto reboot is selected in the option list
-Click PDA and select the Rogue tar, then select start
-Let the phone boot back up fully, then reboot for best results
-Sit back and bask in the Rogue glory!
CWM-
-Make a backup in your current recovery
-Download zip from link below
-Place zip on sdcard
-Boot into recovery and install zip
-Let the phone boot back up fully, then update profile and PRL
-Reboot
-Sit back and bask in the Rogue glory!
Download-
ODIN-
Rogue Stock FC06 (Odin Tar)
CWM ZIP-
Rogue Stock FC06 (CWM Zip)
Source-
Can be found on Github- HERE
Thank You-
Koush
CyanogenMod Team
j-r0dd
Calkulin
codeworkx

Donate to Team Rogue HERE
-Follow me on Twitter/G-Plus for update info-

-Partial Changelog-
FC06 (Official Release)
Kernel-
+Updated kernel to FC06 (Thanks Calkulin)
*Adjusted mount settings
Recovery-
*Rogue v1.2.2
FB27 (Official Release)
Kernel-
*Updated kernel and initramfs blobs to FB27
*Changed bootanimation handling again (note: not recommended to have both /system/bin/bootanimation and /system/bin/samsungani present at the same time)
+Replaced missing FOTA parts
*Changed dalvik-cache permissions to 773 for sbrissen-CM9
Recovery-
*Rogue v1.2.2
+Backported some recovery patches from CWM 5.5
*Adjusted recovery text layout a bit
FB21 rev2 (Official Release)
Kernel-
*Add explicit handling for /data/system to fix bootloop on factory reset (thanks Calkulin!)
Recovery-
*Rogue v1.2.1
FB21 (Official Release)
Kernel-
+Based on stock pulled FB21 (Thanks Calkulin!)
+Works on both stock ICS Touchwiz Roms and CM9
Recovery-
*Rogue v1.2.1
FB17 (Official Release)
Kernel-
+Based on stock pulled FB17 (Thanks ACS Team!)
+init.d and bootanimation support
*Adjust mount options in init.rc
*Modified init files for CM9 (C build only)
Recovery-
*Rogue v1.2.1
*Fix USB mount error
*Fix toggle options in menus
*Fix script assert toggle
**Disable assert is still broken
FB15 (Official Release)
Recovery-
***Recovery mounting is broken***
*Rogue v1.2.0
+Updated to CWM 5.0.2.8, bugfixes
+Roboto font, style changes
*Fix script assert switch
Kernel-
+Based on stock pulled FB15 (Thanks Calkulin!)
EL29 (Official Release)
Recovery-
*Rogue v1.1.2
Kernel-
+Based on EL29 stock pulled kernel (Thanks Calkulin and puertoblack2003 !)
+Based on Codeworkx's initramfs
+Init.d support
+Bootanimation support
EL26 (Official Release)
Recovery-
*Rogue v1.1.2
Kernel-
+Based on EL26 stock pulled kernel (Thanks Calkulin!)
+Based on Codeworkx's initramfs
+Init.d support
+Bootanimation support
EL13 (Official Release)
Recovery-
+Confirmation screen in low space situation
*Rogue v1.1.2
Kernel-
+Based on EL13 stock pulled kernel (Thanks Calkulin!)
+Based on Codeworkx's initramfs
+Init.d support
+Bootanimation support
EK02 (Official Release)
Recovery-
*Rogue v1.1
Kernel-
+Based on kingsway8605's stock pulled EK02 kernel
+Based on Codeworkx's initramfs
+Init.d support
+Bootanimation support
EG30 rev2 (Official Release)
Recovery-
+Based on CWR 5.0.2.7 (with old keyconfig)
+Backup/Restore on internal storage (/emmc)
+Mount internal storage over USB
Kernel-
*Remained unchanged
EG30 (Official Release)
Recovery-
+Based on CWM 5.0.2.6
+Overhauled UI
+Fewer clicks & new menus (Thanks j-r0dd)
+Battery level in conformation screen
Kernel-
+Based on Bubby's stock pulled EG30 kernel
+Based on Codeworkx's initramfs
+Init.d support
+Bootanimation support
-Archive-
-ICS-
Rogue Stock FB27
Rogue Stock FB21 rev2 (CWM Zip)
Rogue Stock FB21 rev2 (Odin Tar)
Rogue Stock FB17 for CM9 (CWM Zip)
Rogue Stock FB17 for CM9 (Odin Tar)
Rogue Stock FB17 (CWM Zip)
Rogue Stock FB17 (Odin Tar)
Rogue Stock FB15 (CWM Zip)
Rogue Stock FB15 (Odin Tar)
-Gingerbread-
Rogue Stock EL29 (ZIP)
Rogue Stock EL29 (Odin Tar)
Rogue Stock EL26 (ZIP)
Rogue Stock EL13 (ZIP)
Rogue Stock EK02 (ZIP)

We love the great work you put into this stuff man. Thanks!

Love at first sight. Gracias sir
Sent from my SPH-D710 using xda premium

Many thanks for all your work guys. Now onto the waiting game for the other devs to update ROMs.

Ya, ya, ya!!! Thanks Steady!!!

Downloading now!!!! Thanks!
Sent from my SPH-D710 using XDA

Really appreciate the work you do!

Overclocking
Will this kernel allow overclocking or just underclocking/volting?
Thanks!

You guys rock! Thanks a million.
p.s. I got the yellow triangle on second reboot, never had that before. Do I need to do anything or is it a big deal?

Can you flash the zip through rom manager?

Thanks for the update... I love you, Steady! (no homo)

Is the tar file still preferable or this kernel can be flashed in FB27 CWM recovery?

Thanks a lot Steady! I couldn't sleep for this! Finally it's here! You da man!

Thx needed this...
Sent from my SPH-D710 using xda premium

Admiral2145 said:
Thx needed this...
Sent from my SPH-D710 using xda premium
Click to expand...
Click to collapse
Just what i was waiting for. Thank you.

agat63 said:
Is the tar file still preferable or this kernel can be flashed in FB27 CWM recovery?
Click to expand...
Click to collapse
Considering the issues that others have reported using Rogue recovery to flash in ICS I opted for the tar and odin mobile. Worked perfectly and is safer as far as I can tell.
Get it here

bavarianblessed said:
Considering the issues that others have reported using Rogue recovery to flash in ICS I opted for the tar and odin mobile. Worked perfectly and is safer as far as I can tell.
Get it here
Click to expand...
Click to collapse
what are the steps to use this?
update: never mind i got it

Bukem75 said:
Thanks for the update... I love you, Steady! (no homo)
Click to expand...
Click to collapse
Haha "no homo" I love that! I LULed!!
---------- Post added at 10:27 AM ---------- Previous post was at 10:26 AM ----------
snowboardb86 said:
Haha "no homo" I love that! I LULed!!
Click to expand...
Click to collapse
Truly though Steady, you are great! Thank you and all the other dev's that are making this phone so bad ass!

Flashed the .tar with mobile odin quickly and easily. that Mobile Odin is awesome. Thanks for all of the hard work Steady!

[KERNEL/RECOVERY][ICS] Rogue Stock FC07 (New 3/10/12)

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
CWM Rogue Recovery
&
Rogue *Stock FC07* Kernel

Presented By-
TDR
Bazar6
Darchstar
Steady Hawkin
Warning-
***DO NOT USE THIS RECOVERY TO FLASH ANY ROM***
Known Issues-
-Flashing anything for ICS is risky and could result in bricking your device. It has been said a safe bet is using stock EL26 CWR to flash. By flashing our repack you agree that we are not held liable.
-You will not receive any OTA after flashing this.
-You will not be able to install apps to external sdcard on CM9 (you can still access external sdcard though)
General-
**This kernel and recovery does not install superuser or busybox, please have both installed prior to flashing.**
Rogue Recovery v1.2.2 Includes:
CWM 5.0.2.8 Base
Overhauled UI
New menus
Fewer clicks
Take a look and see what else
*See changelog
Kernel Includes:
Based on Calkulin's stock pulled FC07
Bootanimation Support
Init.d Support
*See changlog
Install Instructions-
ODIN-
-Make a nandroid in your current recovery then proceed
-Download tar from link below
-Place phone in download mode
-Open Odin and make sure only auto reboot is selected in the option list
-Click PDA and select the Rogue tar, then select start
-Let the phone boot back up fully, then reboot for best results
-Sit back and bask in the Rogue glory!
CWM-
-Make a backup in your current recovery
-Download zip from link below
-Place zip on sdcard
-Boot into recovery and install zip
-Let the phone boot back up fully, then update profile and PRL
-Reboot
-Sit back and bask in the Rogue glory!
Download-
ODIN-
Rogue Stock FC07 (Odin Tar)
CWM ZIP-
Rogue Stock FC07 (CWM Zip)
Source-
Can be found on Github- HERE
Thank You-
Koush
CyanogenMod Team
j-r0dd
Calkulin
codeworkx

Donate to Team Rogue HERE
-Follow me on Twitter/G-Plus for update info-

-Partial Changelog-
FC07 (Official Release)
Kernel-
+Updated kernel to FC07 (Thanks Calkulin)
Recovery-
*Rogue v1.2.2
FC06 (Official Release)
Kernel-
+Updated kernel to FC06 (Thanks Calkulin)
*Adjusted mount settings
Recovery-
*Rogue v1.2.2
FB27 (Official Release)
Kernel-
*Updated kernel and initramfs blobs to FB27
*Changed bootanimation handling again (note: not recommended to have both /system/bin/bootanimation and /system/bin/samsungani present at the same time)
+Replaced missing FOTA parts
*Changed dalvik-cache permissions to 773 for sbrissen-CM9
Recovery-
*Rogue v1.2.2
+Backported some recovery patches from CWM 5.5
*Adjusted recovery text layout a bit
FB21 rev2 (Official Release)
Kernel-
*Add explicit handling for /data/system to fix bootloop on factory reset (thanks Calkulin!)
Recovery-
*Rogue v1.2.1
FB21 (Official Release)
Kernel-
+Based on stock pulled FB21 (Thanks Calkulin!)
+Works on both stock ICS Touchwiz Roms and CM9
Recovery-
*Rogue v1.2.1
FB17 (Official Release)
Kernel-
+Based on stock pulled FB17 (Thanks ACS Team!)
+init.d and bootanimation support
*Adjust mount options in init.rc
*Modified init files for CM9 (C build only)
Recovery-
*Rogue v1.2.1
*Fix USB mount error
*Fix toggle options in menus
*Fix script assert toggle
**Disable assert is still broken
FB15 (Official Release)
Recovery-
***Recovery mounting is broken***
*Rogue v1.2.0
+Updated to CWM 5.0.2.8, bugfixes
+Roboto font, style changes
*Fix script assert switch
Kernel-
+Based on stock pulled FB15 (Thanks Calkulin!)
EL29 (Official Release)
Recovery-
*Rogue v1.1.2
Kernel-
+Based on EL29 stock pulled kernel (Thanks Calkulin and puertoblack2003 !)
+Based on Codeworkx's initramfs
+Init.d support
+Bootanimation support
EL26 (Official Release)
Recovery-
*Rogue v1.1.2
Kernel-
+Based on EL26 stock pulled kernel (Thanks Calkulin!)
+Based on Codeworkx's initramfs
+Init.d support
+Bootanimation support
EL13 (Official Release)
Recovery-
+Confirmation screen in low space situation
*Rogue v1.1.2
Kernel-
+Based on EL13 stock pulled kernel (Thanks Calkulin!)
+Based on Codeworkx's initramfs
+Init.d support
+Bootanimation support
EK02 (Official Release)
Recovery-
*Rogue v1.1
Kernel-
+Based on kingsway8605's stock pulled EK02 kernel
+Based on Codeworkx's initramfs
+Init.d support
+Bootanimation support
EG30 rev2 (Official Release)
Recovery-
+Based on CWR 5.0.2.7 (with old keyconfig)
+Backup/Restore on internal storage (/emmc)
+Mount internal storage over USB
Kernel-
*Remained unchanged
EG30 (Official Release)
Recovery-
+Based on CWM 5.0.2.6
+Overhauled UI
+Fewer clicks & new menus (Thanks j-r0dd)
+Battery level in conformation screen
Kernel-
+Based on Bubby's stock pulled EG30 kernel
+Based on Codeworkx's initramfs
+Init.d support
+Bootanimation support
-Archive-
-ICS-
Rogue Stock FC06
Rogue Stock FB27
Rogue Stock FB21 rev2 (CWM Zip)
Rogue Stock FB21 rev2 (Odin Tar)
Rogue Stock FB17 for CM9 (CWM Zip)
Rogue Stock FB17 for CM9 (Odin Tar)
Rogue Stock FB17 (CWM Zip)
Rogue Stock FB17 (Odin Tar)
Rogue Stock FB15 (CWM Zip)
Rogue Stock FB15 (Odin Tar)
-Gingerbread-
Rogue Stock EL29 (ZIP)
Rogue Stock EL29 (Odin Tar)
Rogue Stock EL26 (ZIP)
Rogue Stock EL13 (ZIP)
Rogue Stock EK02 (ZIP)

Sweet!!!! Thanks guys.
Sent from my SPH-D710 using xda premium

will this work
will this work on a fc06 rom? like venums?

I'm confused. I can't use this to flash ROMs?
Sent from my SPH-D710 using xda premium

I knew I should've waited lol thanks Steady!

yaboybiggs said:
I'm confused. I can't use this to flash ROMs?
Sent from my SPH-D710 using xda premium
Click to expand...
Click to collapse
You could ... It just greatly increases the chances of bricking your phone ... but it works just fine for new modems, themes, and kernels. Seriously though, don't flash a ROM with it. Better safe than sorry.

ROFL
Specialksg1 said:
You could ... It just greatly increases the chances of bricking your phone ... but it works just fine for new modems, themes, and kernels. Seriously though, don't flash a ROM with it. Better safe than sorry.
Click to expand...
Click to collapse
I use these repacks to flash beta ics roms... bricking comes from people using rom manager to flash... don't listen to him... Matter of fact I used el29 recovery to flash to fc02 then every one after that I used these with out problem or bricking...

yaboybiggs said:
I'm confused. I can't use this to flash ROMs?
Sent from my SPH-D710 using xda premium
Click to expand...
Click to collapse
I just installed this Kernel and nothing happened except my phone is running like a Space Shuttle.

Admiral2145 said:
I use these repacks to flash beta ics roms... bricking comes from people using rom manager to flash... don't listen to him... Matter of fact I used el29 recovery to flash to fc02 then every one after that I used these with out problem or bricking...
Click to expand...
Click to collapse
same here. ive used mobile odin to flash these repacks and then the repack to flash any of the ics roms since fb21ish.
Sent from my SPH-D710 using Tapatalk

Admiral2145 said:
I use these repacks to flash beta ics roms... bricking comes from people using rom manager to flash... don't listen to him... Matter of fact I used el29 recovery to flash to fc02 then every one after that I used these with out problem or bricking...
Click to expand...
Click to collapse
Actually no your wrong on the bricking, its iCS related period, steady bricked his too buddy, rom manager is a helper as well.

Admiral2145 said:
I use these repacks to flash beta ics roms... bricking comes from people using rom manager to flash... don't listen to him... Matter of fact I used el29 recovery to flash to fc02 then every one after that I used these with out problem or bricking...
Click to expand...
Click to collapse
I strongly agree with this opinion. I have an experience having hard time with Rom Manager (Toolbox). I believe Rom Manager is still GB based for D710 and it's not working well with D710 ICS Rom. ROM Toolbox seems like working well except the recovery functions.

has anyone one gave in and tried this with CM9 yet? if not here goes nothing!

screenshot after flashing Rogue FC07 Kernel & reboot (Confirmed entering to Rogue recovery mode)
Everything is now showing FC07.

blooming hell, yellow triangle .. thank goodness for triangle away

just curious why you wouldn't want to repack with stock cwm since we are having issues with rogue? I assume its because it wouldn't make any difference but I have no idea.
Thanks once again for the repack!!

wow this kernel is amazing fco6 i got about 3800 quadrant .
fc07

lafester said:
just curious why you wouldn't want to repack with stock cwm since we are having issues with rogue? I assume its because it wouldn't make any difference but I have no idea.
Thanks once again for the repack!!
Click to expand...
Click to collapse
Good question. It probably doesn't matter.
Sent from my Super Sexy Epic Touch.

From what I hear, the issues are when you format and go between GB and ICS. I've got the Best Buy Black Tie, so I'm not all that afraid of bricking (aside from having to spend too much time in a Best Buy ... I always walk out with less money than I walked in! lol) but if the Dev tells me not to do something because it could possibly give ya the ol' BLD (Blue light of Death for the noobs ) I tend to play it safe. Just one guys thoughts on the matter.

Fb07 modem and kernel with venum's fb06 rom no issues my bad fc lol
Also gps locks fast, about 5 sec after using gps status.
Sent from my SPH-D710 using xda premium

[KERNEL/RECOVERY][ICS] Rogue Stock FC18 (New 3/20/12)

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
CWM Rogue Recovery
&
Rogue *Stock FC18* Kernel

Presented By-
TDR
Bazar6
Darchstar
Steady Hawkin
Warning-
***DO NOT USE THIS RECOVERY TO FLASH ANY ROM***
Known Issues-
-Flashing anything for ICS is risky and could result in bricking your device. It has been said a safe bet is using stock EL26 CWR to flash. By flashing our repack you agree that we are not held liable.
-You will not receive any OTA after flashing this.
-You will not be able to install apps to external sdcard on CM9 (you can still access external sdcard though)
General-
**This kernel and recovery does not install superuser or busybox, please have both installed prior to flashing.**
Rogue Recovery v1.2.3 Includes:
CWM 5.0.2.8 Base
Overhauled UI
New menus
Fewer clicks
Take a look and see what else
*See changelog
Kernel Includes:
Based on Calkulin's stock pulled FC18
Bootanimation Support
Init.d Support
*See changlog
Install Instructions-
ODIN-
-Make a nandroid in your current recovery then proceed
-Download tar from link below
-Place phone in download mode
-Open Odin and make sure only auto reboot is selected in the option list
-Click PDA and select the Rogue tar, then select start
-Let the phone boot back up fully, then reboot for best results
-Sit back and bask in the Rogue glory!
CWM-
-Make a backup in your current recovery
-Download zip from link below
-Place zip on sdcard
-Boot into recovery and install zip
-Let the phone boot back up fully, then update profile and PRL
-Reboot
-Sit back and bask in the Rogue glory!
Download-
ODIN-
Rogue Stock FC18 (Odin Tar)
CWM ZIP-
Rogue Stock FC18 (CWM Zip)
Source-
Can be found on Github- HERE
Thank You-
Koush
CyanogenMod Team
j-r0dd
Calkulin
codeworkx

Donate to Team Rogue HERE
-Follow me on Twitter/G-Plus for update info-

-Partial Changelog-
FC18 (Official Release)
Kernel-
+Updated kernel to FC18 (Thanks Calkulin)
*Select ondemand cpu governor and noop I/O scheduler in init
Recovery-
*Rogue v1.2.3
+Added reboot to download mode in Advanced menu
FC07 (Official Release)
Kernel-
+Updated kernel to FC07 (Thanks Calkulin)
Recovery-
*Rogue v1.2.2
FC06 (Official Release)
Kernel-
+Updated kernel to FC06 (Thanks Calkulin)
*Adjusted mount settings
Recovery-
*Rogue v1.2.2
FB27 (Official Release)
Kernel-
*Updated kernel and initramfs blobs to FB27
*Changed bootanimation handling again (note: not recommended to have both /system/bin/bootanimation and /system/bin/samsungani present at the same time)
+Replaced missing FOTA parts
*Changed dalvik-cache permissions to 773 for sbrissen-CM9
Recovery-
*Rogue v1.2.2
+Backported some recovery patches from CWM 5.5
*Adjusted recovery text layout a bit
FB21 rev2 (Official Release)
Kernel-
*Add explicit handling for /data/system to fix bootloop on factory reset (thanks Calkulin!)
Recovery-
*Rogue v1.2.1
FB21 (Official Release)
Kernel-
+Based on stock pulled FB21 (Thanks Calkulin!)
+Works on both stock ICS Touchwiz Roms and CM9
Recovery-
*Rogue v1.2.1
FB17 (Official Release)
Kernel-
+Based on stock pulled FB17 (Thanks ACS Team!)
+init.d and bootanimation support
*Adjust mount options in init.rc
*Modified init files for CM9 (C build only)
Recovery-
*Rogue v1.2.1
*Fix USB mount error
*Fix toggle options in menus
*Fix script assert toggle
**Disable assert is still broken
FB15 (Official Release)
Recovery-
***Recovery mounting is broken***
*Rogue v1.2.0
+Updated to CWM 5.0.2.8, bugfixes
+Roboto font, style changes
*Fix script assert switch
Kernel-
+Based on stock pulled FB15 (Thanks Calkulin!)
EL29 (Official Release)
Recovery-
*Rogue v1.1.2
Kernel-
+Based on EL29 stock pulled kernel (Thanks Calkulin and puertoblack2003 !)
+Based on Codeworkx's initramfs
+Init.d support
+Bootanimation support
EL26 (Official Release)
Recovery-
*Rogue v1.1.2
Kernel-
+Based on EL26 stock pulled kernel (Thanks Calkulin!)
+Based on Codeworkx's initramfs
+Init.d support
+Bootanimation support
EL13 (Official Release)
Recovery-
+Confirmation screen in low space situation
*Rogue v1.1.2
Kernel-
+Based on EL13 stock pulled kernel (Thanks Calkulin!)
+Based on Codeworkx's initramfs
+Init.d support
+Bootanimation support
EK02 (Official Release)
Recovery-
*Rogue v1.1
Kernel-
+Based on kingsway8605's stock pulled EK02 kernel
+Based on Codeworkx's initramfs
+Init.d support
+Bootanimation support
EG30 rev2 (Official Release)
Recovery-
+Based on CWR 5.0.2.7 (with old keyconfig)
+Backup/Restore on internal storage (/emmc)
+Mount internal storage over USB
Kernel-
*Remained unchanged
EG30 (Official Release)
Recovery-
+Based on CWM 5.0.2.6
+Overhauled UI
+Fewer clicks & new menus (Thanks j-r0dd)
+Battery level in conformation screen
Kernel-
+Based on Bubby's stock pulled EG30 kernel
+Based on Codeworkx's initramfs
+Init.d support
+Bootanimation support
-Archive-
-ICS-
Rogue Stock FC07
Rogue Stock FC06
Rogue Stock FB27
Rogue Stock FB21 rev2 (CWM Zip)
Rogue Stock FB21 rev2 (Odin Tar)
Rogue Stock FB17 for CM9 (CWM Zip)
Rogue Stock FB17 for CM9 (Odin Tar)
Rogue Stock FB17 (CWM Zip)
Rogue Stock FB17 (Odin Tar)
Rogue Stock FB15 (CWM Zip)
Rogue Stock FB15 (Odin Tar)
-Gingerbread-
Rogue Stock EL29 (ZIP)
Rogue Stock EL29 (Odin Tar)
Rogue Stock EL26 (ZIP)
Rogue Stock EL13 (ZIP)
Rogue Stock EK02 (ZIP)

yeehaw. thanks !
Sent from my SPH-D710 using Tapatalk

Alright time to flash fc18 thanks steady!

This with Calkulin's stock FC18 rom, man, I'm in heaven!
Silky smooth all the way around and back! Thank you sir!
Sent from my SPH-D710 using XDA

thanks!
Sent from my SPH-D710 using Tapatalk

Thank you VERY much Steady Hawkin! Your work and time are very much appreciated!
Everybody please hit THANKS in 1st post! This is what we have all been patiently waiting for.

Thanks Steady. You are awesome.

Thanks
Sent from my SPH-D710 using xda premium

BAZINGA!!
Thank you, Steady!

Thanks Steady....
Sent from my SPH-D710 using XDA

thanks man!

I know this says do not flash, but is that related to CM roms? I have been using rogue fc07 to flash all the ICS calk and agat rooms that have come out and had zero issues. I'm assuming its a warning for MIUI and CM9 users since the other roms were based from stock fc18, but if I'm wrong lemme know.
Sent from my SPH-D710 using XDA

Thanks steady..
I'm adding this monster tonight
-Sent from my GS2-US/E4GT operating sfhub's FC-15 cold Ice Cream using xda premium

Thank you kind sir !!!
this kernel is making stock fc18 smooth like butta !!

dante32278 said:
I know this says do not flash, but is that related to CM roms? I have been using rogue fc07 to flash all the ICS calk and agat rooms that have come out and had zero issues. I'm assuming its a warning for MIUI and CM9 users since the other roms were based from stock fc18, but if I'm wrong lemme know.
Sent from my SPH-D710 using XDA
Click to expand...
Click to collapse
I'd just take the advice and if you wanna ride like some of us go for it. I was just on FC15 at work flashed the FC07 Rogue so I could flash the FC18 rom. All went well and normally i ODIN back to EL29 but i was in a hurry.
From what I have seen, stock roms maybe, custom roms maybe not. The people doing the testing say there is risk I believe them. But when I am sleep deprived at 7 am I do stupid things....

Using this to flash recoveries and kernels ok? LIke so I can flash back to FB27 and use that to flash a rom, then reflash this kernel and recovery afterwards?
By the way, thank you so much! You do suck awesome stuff for us. We owe you BIG TIME! Thanks!!!!!!

dante32278 said:
I know this says do not flash, but is that related to CM roms? I have been using rogue fc07 to flash all the ICS calk and agat rooms that have come out and had zero issues. I'm assuming its a warning for MIUI and CM9 users since the other roms were based from stock fc18, but if I'm wrong lemme know.
Sent from my SPH-D710 using XDA
Click to expand...
Click to collapse
No, it applies to other ICS ROMs too. I was stuck in a bootloops before flashing Blend ICS and also Blazer ICS with FC07. To be safe, you should just flash back FB21 and then reboot Recovery to flash.

Unbelievably smooth awesome work.. on cm9!! Perfection!!
Sent from my SPH-D710 using xda premium

Thx Steady!

[KERNEL/RECOVERY][ICS] Rogue Stock FC22 (New 3/24/12)

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
CWM Rogue Recovery
&
Rogue *Stock FC22* Kernel

Presented By-
TDR
Bazar6
Darchstar
Steady Hawkin
Warning-
***DO NOT USE THIS RECOVERY TO FLASH ANY ROM***
Known Issues-
-Flashing anything for ICS is risky and could result in bricking your device. It has been said a safe bet is using stock EL26 CWR to flash. By flashing our repack you agree that we are not held liable.
-You will not receive any OTA after flashing this.
-You will not be able to install apps to external sdcard on CM9 (you can still access external sdcard though)
General-
**This kernel and recovery does not install superuser or busybox, please have both installed prior to flashing.**
Rogue Recovery v1.2.3 Includes:
CWM 5.0.2.8 Base
Overhauled UI
New menus
Fewer clicks
Take a look and see what else
*See changelog
Kernel Includes:
Based on Calkulin's stock pulled FC22
Bootanimation Support
Init.d Support
*See changlog
Install Instructions-
ODIN-
-Make a nandroid in your current recovery then proceed
-Download tar from link below
-Place phone in download mode
-Open Odin and make sure only auto reboot is selected in the option list
-Click PDA and select the Rogue tar, then select start
-Let the phone boot back up fully, then reboot for best results
-Sit back and bask in the Rogue glory!
CWM-
-Make a backup in your current recovery
-Download zip from link below
-Place zip on sdcard
-Boot into recovery and install zip
-Let the phone boot back up fully, then update profile and PRL
-Reboot
-Sit back and bask in the Rogue glory!
Download-
ODIN-
Rogue Stock FC22 (Odin Tar)
CWM ZIP-
Rogue Stock FC22 (CWM Zip)
Source-
Can be found on Github- HERE
Thank You-
Koush
CyanogenMod Team
j-r0dd
Calkulin
codeworkx

Donate to Team Rogue HERE
-Follow me on Twitter/G-Plus for update info-

-Partial Changelog-
FC22 (Official Release)
Kernel-
+Updated kernel to FC22 (Thanks Calkulin)
Recovery-
*Rogue v1.2.3
FC18 (Official Release)
Kernel-
+Updated kernel to FC18 (Thanks Calkulin)
*Select ondemand cpu governor and noop I/O scheduler in init
Recovery-
*Rogue v1.2.3
+Added reboot to download mode in Advanced menu
FC07 (Official Release)
Kernel-
+Updated kernel to FC07 (Thanks Calkulin)
Recovery-
*Rogue v1.2.2
FC06 (Official Release)
Kernel-
+Updated kernel to FC06 (Thanks Calkulin)
*Adjusted mount settings
Recovery-
*Rogue v1.2.2
FB27 (Official Release)
Kernel-
*Updated kernel and initramfs blobs to FB27
*Changed bootanimation handling again (note: not recommended to have both /system/bin/bootanimation and /system/bin/samsungani present at the same time)
+Replaced missing FOTA parts
*Changed dalvik-cache permissions to 773 for sbrissen-CM9
Recovery-
*Rogue v1.2.2
+Backported some recovery patches from CWM 5.5
*Adjusted recovery text layout a bit
FB21 rev2 (Official Release)
Kernel-
*Add explicit handling for /data/system to fix bootloop on factory reset (thanks Calkulin!)
Recovery-
*Rogue v1.2.1
FB21 (Official Release)
Kernel-
+Based on stock pulled FB21 (Thanks Calkulin!)
+Works on both stock ICS Touchwiz Roms and CM9
Recovery-
*Rogue v1.2.1
FB17 (Official Release)
Kernel-
+Based on stock pulled FB17 (Thanks ACS Team!)
+init.d and bootanimation support
*Adjust mount options in init.rc
*Modified init files for CM9 (C build only)
Recovery-
*Rogue v1.2.1
*Fix USB mount error
*Fix toggle options in menus
*Fix script assert toggle
**Disable assert is still broken
FB15 (Official Release)
Recovery-
***Recovery mounting is broken***
*Rogue v1.2.0
+Updated to CWM 5.0.2.8, bugfixes
+Roboto font, style changes
*Fix script assert switch
Kernel-
+Based on stock pulled FB15 (Thanks Calkulin!)
EL29 (Official Release)
Recovery-
*Rogue v1.1.2
Kernel-
+Based on EL29 stock pulled kernel (Thanks Calkulin and puertoblack2003 !)
+Based on Codeworkx's initramfs
+Init.d support
+Bootanimation support
EL26 (Official Release)
Recovery-
*Rogue v1.1.2
Kernel-
+Based on EL26 stock pulled kernel (Thanks Calkulin!)
+Based on Codeworkx's initramfs
+Init.d support
+Bootanimation support
EL13 (Official Release)
Recovery-
+Confirmation screen in low space situation
*Rogue v1.1.2
Kernel-
+Based on EL13 stock pulled kernel (Thanks Calkulin!)
+Based on Codeworkx's initramfs
+Init.d support
+Bootanimation support
EK02 (Official Release)
Recovery-
*Rogue v1.1
Kernel-
+Based on kingsway8605's stock pulled EK02 kernel
+Based on Codeworkx's initramfs
+Init.d support
+Bootanimation support
EG30 rev2 (Official Release)
Recovery-
+Based on CWR 5.0.2.7 (with old keyconfig)
+Backup/Restore on internal storage (/emmc)
+Mount internal storage over USB
Kernel-
*Remained unchanged
EG30 (Official Release)
Recovery-
+Based on CWM 5.0.2.6
+Overhauled UI
+Fewer clicks & new menus (Thanks j-r0dd)
+Battery level in conformation screen
Kernel-
+Based on Bubby's stock pulled EG30 kernel
+Based on Codeworkx's initramfs
+Init.d support
+Bootanimation support
-Archive-
-ICS-
Rogue Stock FC18
Rogue Stock FC07
Rogue Stock FC06
Rogue Stock FB27
Rogue Stock FB21 rev2 (CWM Zip)
Rogue Stock FB21 rev2 (Odin Tar)
Rogue Stock FB17 for CM9 (CWM Zip)
Rogue Stock FB17 for CM9 (Odin Tar)
Rogue Stock FB17 (CWM Zip)
Rogue Stock FB17 (Odin Tar)
Rogue Stock FB15 (CWM Zip)
Rogue Stock FB15 (Odin Tar)
-Gingerbread-
Rogue Stock EL29 (ZIP)
Rogue Stock EL29 (Odin Tar)
Rogue Stock EL26 (ZIP)
Rogue Stock EL13 (ZIP)
Rogue Stock EK02 (ZIP)

First
Sent from my SPH-D710 using Tapatalk

second, nice, THANKS
Sent from a phone with kNOw CIQ ...

Thank the lord!!!
That means Calk will update his custom from to fc22
Sent from my SPH-D710 using xda premium

Great work man cant wait to try

Awesome!! Thank you Steady
Sent from my SPH-D710 using xda premium

Thank you sir
Sent from my SPH-D710 using xda premium

Thanks Team Rogue ...

Thanks
Sent from my SPH-D710 using xda premium

Awesome, thanks again
Sent from my SPH-D710 using xda premium

OK I'm trying to figure out what this is meant for. It clearly states don't flash any rom with this recovery.
Then what is its purpose?
Flamers need not reply
Sent from my SPH-D710 using xda premium

humdrum2009 said:
OK I'm trying to figure out what this is meant for. It clearly states don't flash any rom with this recovery.
Then what is its purpose?
Flamers need not reply
Sent from my SPH-D710 using xda premium
Click to expand...
Click to collapse
You may and nothing may happen but he's just covering his ass in case something does happens and then you want your money back

slick4mitch said:
You may and nothing may happen but he's just covering his ass in case something does happens and then you want your money back
Click to expand...
Click to collapse
lol
Sent from my SPH-D710 using xda premium

Anyone has a.mirror to the tar of fc 22
Sent from my SPH-D710 using xda premium

Dumb question probably but if im running el29 rogue can I flash this keeping the el29 ROM?
Sent from my SPH-D710 using XDA

RPerry435 said:
Dumb question probably but if im running el29 rogue can I flash this keeping the el29 ROM?
Sent from my SPH-D710 using XDA
Click to expand...
Click to collapse
Nooooo! Do not flash this with gb. Its for Ics ONLY! Lol
Sent from my SPH-D710 using xda premium

Nobody reporting on this yet?

I still don't understand how people are bricking their phones by flashing ICS-related things from within these CWM repacks. I've been flashing ICS ROM's and mods in these kernels and NEVER EVER had an issue.

gottria said:
Nobody reporting on this yet?
Click to expand...
Click to collapse
Grabbed if from SH's twitter yesterday; flashed and running great. Agat63 rolled it into his tFC22 ROM he updated early this morning; I think reviews are pretty positive.

[KERNEL][CWM][ODIN] Kernel Repository - Download Them All Here! (SPH-D710)

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Here you can find just about every kernel ever created for the Samsung Epic 4G Touch.
If you are looking for modems you can find them at the Modem Repo.
Kernels control a lot of things on your phone and having the right kernel can lead to phenomenal battery life, awesome performance and great tweaks. However, if you get the wrong kernel it can cause boot loops and other issues.
As a general reminder, I cannot and will not be held responsible for any issues that arise from improper flashing of these kernels.
Before flashing any kernels I've posted here please do three things.
1) Review the "How Not To Brick Your E4GT" thread.
2) Review the instructions on how to flash a kernel properly in Post #2.
3) If you have questions, ask! We're all here to help!
Now on to the fun stuff!
Let me first say I did not create any of these kernels I am merely taking them all and placing them all in one easy to find location. All thanks should go to those who have been anonymously giving us the leaks on which they are built and to those who have been developing them.
Please do not post direct links to the kernels on the site. All kernels are available through the links on this post. Thank you!
Recommended Kernel for Flashing in ICS (due to EMMC Bug)
GB - Stock EL26 Repacked Kernel (TAR.MD5 Format) (One-Click.EXE Format) *Thanks to chris41g!
Developer Thread/Site: http://forum.xda-developers.com/showthread.php?t=1416056
Notes: This is the recommended kernel for flashing. Kernel is GB based and will not work as a daily kernel on ICS.
Available Kernels (TAR.MD5 Format): EL26
Available Kernels (One-Click Format): EL26
JB Touch-Wiz Based Kernels
JB - Stock/Touch-Wiz Kernels
Available Kernels (ZIP Format): GB27 / GB08 / GA10 / FL16 / FL04 / FK23 / FK09
Available Kernels (TAR.MD5 Format): GB27 / GB08 / GA10 / FL16 / FL04 / FK23 / FK09
Available Kernels (One-Click Format): GC01 GB27 / GB08 / GA10 / FL16 / FL04 / FK23 / FK09
JB - Boost Stock/Touch-Wiz Kernels
Available Kernels (ZIP Format): GC01 (Boost)
Available Kernels (TAR.MD5 Format): GC01 (Boost)
Available Kernels (One-Click Format): GC01 (Boost)
JB - Virgin Stock/Touch-Wiz Kernels
Available Kernels (ZIP Format): GB28 (Virgin) / FL14 (Virgin)
Available Kernels (TAR.MD5 Format): GB28 (Virgin) / FL14 (Virgin)
Available Kernels (One-Click Format): GB28 (Virgin) / FL14 (Virgin)
JB - Agat63's Source Built Recovery Kernel
Developer Thread/Site: http://forum.xda-developers.com/showthread.php?p=36620350
Available Kernels (ZIP Format): Agat GB27 v1.3.0 / Agat GB27 v1.2.0 / Agat GB27 v1.1.0 / Agat GB27 v1.0.0
Available Kernels (TAR.MD5 Format): Agat GB27 v1.3.0 / Agat GB27 v1.2.0 / Agat GB27 v1.1.0 / Agat GB27 v1.0.0
Available Kernels (One-Click Format): Agat GB27 v1.3.0 / Agat GB27 v1.2.0 / Agat GB27 v1.1.0 / Agat GB27 v1.0.0
JB - Agat63's Repacked Recovery Kernel
Developer Thread/Site: http://forum.xda-developers.com/showthread.php?p=36620350
Available Kernels (ZIP Format): tGA10 / tFL16 (rev 2) / tFK23 / tFJ10
Available Kernels (TAR.MD5 Format): tGA10 / tFL16 (rev 2) / tFK23 / tFJ10
Available Kernels (One-Click Format): tGA10 / tFL16 (rev 2) / tFK23 / tFJ10
ICS Touch-Wiz Based Kernels
ICS - Stock/Touch-Wiz Kernels (Leaked)
Available Kernels (ZIP Format): FL24 / FI27 / FI25 / FI22 (Boost) / FI03 / FH23 / FH13 / FG31 (Boost) / FG20 (Boost) / FF18 / FF11 / FF09 / FF02 / FE22 / FE21 / FE16 / FE14 / FE10 / FE07 / FD26 / FD24 / FD19 / FD16 / FD10 / FD05 / FD02 / FC24 / FC22 / FC18 / FC15 / FC14 / FC13 / FC07 / FC06 / FC05 / FB27 / FB21 / FB17 / FB15
Available Kernels (TAR.MD5 Format): FL24 / FI27 / FI25 / FI22 (Boost) / FI03 / FH23 / FH13 / FG31 (Boost) / FG20 (Boost) / FF18 / FF11 / FF09 / FF02 / FE22 / FE21 / FE16 / FE14 / FE10 / FE07 / FD26 / FD24 / FD19 / FD16 / FD10 / FD05 / FD02 / FC24 / FC22 / FC18 / FC15 / FC14 / FC13 / FC07 / FC06 / FC05 / FB27 / FB21 / FB17 / FB15
Available Kernels (One-Click Format): FL24 / FI27 / FI25 / FI22 (Boost) / FI03 / FH23 / FH13 / FG31 (Boost) / FG20 (Boost) / FF18 / FF11 / FF09 / FF02 / FE22 / FE21 / FE16 / FE14 / FE10 / FE07 / FD26 / FD24 / FD19 / FD16 / FD10 / FD05 / FD02 / FC24 / FC22 / FC18 / FC15 / FC14 / FC13 / FC07 / FC06 / FC05 / FB27 / FB21 / FB17 / FB15
ICS - Stock/Touch-Wiz Debug Kernels *Thanks to SexTape
Developer Thread/Site: http://forum.xda-developers.com/showthread.php?t=1691933
Notes: Debug Kernel = Stock/Touch-Wiz Kernel that is pre-rooted (without SU) and comes with additional features. See Developer Thread for more info.
Available Kernels (TAR Format): FE22
Available Kernels (One-Click Format): FE22
ICS - Agat63's Source-Built Recovery Kernel *Thanks to agat63!
Developer Thread/Site: http://forum.xda-developers.com/showthread.php?t=1767421
Available Kernels (ZIP Format): Agat v0.6.8 / Agat v0.6.7 / Agat v0.6.6 / Agat v0.6.5 / Agat v0.6.3 / Agat v0.6.2 / Agat v0.6.0 / Agat v0.5.4 / Agat v0.5.3 / Agat v0.5.2 / Agat v0.5.1 / Agat v0.5.0 / Agat v0.4.5 / Agat v0.4.4 / Agat v0.4.3 / Agat v0.4.2 / Agat v0.4.0 / Agat v0.3.0 / Agat v0.2.3 / Agat v0.2.2 / Agat v0.2.1 / Agat v0.1.1 / Agat v0.1.0
Available Kernels (TAR Format): Agat v0.6.8 / Agat v0.6.7 / Agat v0.6.6 / Agat v0.6.5 / Agat v0.6.3 / Agat v0.6.2 / Agat v0.6.0 / Agat v0.5.4 / Agat v0.5.3 / Agat v0.5.2 / Agat v0.5.1 / Agat v0.5.0 / Agat v0.4.5 / Agat v0.4.4 / Agat v0.4.3 / Agat v0.4.2 / Agat v0.4.0 / Agat v0.3.0 / Agat v0.2.3 / Agat v0.2.2 / Agat v0.2.1 / Agat v0.1.1 / Agat v0.1.0
Available Kernels (One-Click Format): Agat v0.6.8 / Agat v0.6.7 / Agat v0.6.6 / Agat v0.6.5 / Agat v0.6.3 / Agat v0.6.2 / Agat v0.6.0 / Agat v0.5.4 / Agat v0.5.3 / Agat v0.5.2 / Agat v0.5.1 / Agat v0.5.0 / Agat v0.4.5 / Agat v0.4.4 / Agat v0.4.3 / Agat v0.4.2 / Agat v0.4.0 / Agat v0.3.0 / Agat v0.2.3 / Agat v0.2.2 / Agat v0.2.1 / Agat v0.1.1 / Agat v0.1.0
ICS - Agat63's Repacked Recovery Kernel *Thanks to agat63!
Developer Thread/Site: http://forum.xda-developers.com/showthread.php?t=1721065
Available Kernels (ZIP Format): tFI27 (rev 2) / tFI27 (rev 1) / tFI25 / tFI03 / tFH23 / tFH13 / tFG31 / tFF18 (rev 2) / tFF18 (rev 1) / tFF11 (rev 2) / tFF11 (rev 1) / tFF09 / tFF02 / tFE22 (rev 2) / tFE22 (rev 1) / FE22 / FE21 / FE16
Available Kernels (TAR Format): tFI27 (rev 2) / tFI27 (rev 1) / tFI25 / tFI03 / tFH23 / tFH13 / tFG31 / tFF18 (rev 2) / tFF18 (rev 1) / tFF11 (rev 2) / tFF11 (rev 1) / tFF09 / tFF02 / tFE22 (rev 2) / tFE22 (rev 1) / FE22 / FE21 / FE16
Available Kernels (One-Click Format): tFI27 (rev 2) / tFI27 (rev 1) / tFI25 / tFI03 / tFH23 / tFH13 / tFG31 / tFF18 (rev 2) / tFF18 (rev 1) / tFF11 (rev 2) / tFF11 (rev 1) / tFF09 / tFF02 / tFE22 (rev 2) / tFE22 (rev 1) / FE22 / FE21 / FE16
ICS - Sleshepic's Source-Built Recovery Kernels *Thanks to Sleshepic!
Developer Thread/Site: http://forum.xda-developers.com/showthread.php?t=1740101
Available Kernels (ZIP Format): Governors v1.2.6 / Governors v1.2.3 / Governors v1.2.2 / Governors 1.2 / Governors 1.1
Available Kernels (TAR Format): Governors v1.2.6 / Governors v1.2.3 / Governors v1.2.2 / Governors 1.2 / Governors 1.1
Available Kernels (One-Click Format): Governors v1.2.6 / Governors v1.2.3 / Governors v1.2.2 / Governors 1.2 / Governors 1.1
ICS - Chris41g's CWM5 TW Recovery Kernel *Thanks to Chris41g!
Developer Thread/Site: http://forum.xda-developers.com/showthread.php?t=1760299
Available Kernels (ZIP Format): FF18
Available Kernels (TAR Format): FF18
ICS - Rujelus22's Source-Built Kuban Recovery Kernel *Thanks to Rujelus22!
Developer Thread/Site: http://forum.xda-developers.com/showthread.php?t=1826190
Available Kernels (ZIP Format): v0.2.5 / v0.2.4 / v0.2.3 / v0.2.1 / v0.1.9 / v0.1.8 / v0.1.7 / v0.1.6 / v0.1.5 / v0.1.4 / v0.1.3 / v0.1.2 / RC1 / v0.1.0 / v0.0.1
Available Kernels (TAR Format): v0.2.5 / v0.2.4 / v0.2.3 / v0.2.1 / v0.1.9 / v0.1.8 / v0.1.7 / v0.1.6 / v0.1.5 / v0.1.4 / v0.1.3 / v0.1.2 / RC1 / v0.1.0 / v0.0.1
Available Kernels (One-Click Format): v0.2.5 / v0.2.4 / v0.2.3 / v0.2.1 / v0.1.9 / v0.1.8 / v0.1.7 / v0.1.6 / v0.1.5 / v0.1.4 / v0.1.3 / v0.1.2 / RC1 / v0.1.0 / v0.0.1
ICS - Sfhub's Unlocked Recovery Kernels *Thanks to sfhub!
Developer Thread/Site: http://forum.xda-developers.com/showthread.php?t=1671356
Notes: Unlocked = Stock Recovery (not CWM) is unlocked and able to be used for flashing.
Available Kernels (ZIP Format): FE22 / FE21 / FE16 / FE14 / FE10 / FE07 / FD26
Available Kernels (TAR Format): FE22 / FE21 / FE16 / FE14 / FE10 / FE07 / FD26
Available Kernels (One-Click Format): FE22 / FE21 / FE16 / FE14 / FE10 / FE07
ICS - Sfhub's Unlocked Recovery Plus Kernels *Thanks to sfhub!
Developer Thread/Site: http://forum.xda-developers.com/showthread.php?t=1671356
Notes: Plus = Unlocked Stock Recovery (not CWM), init.d support, Boot Animation support, USB-Mass Storage as default, ADB Root Access.
Available Kernels (ZIP Format): FE22 / FE21 / FE16 / FE14 / FE10 / FE07 / FD26
Available Kernels (TAR Format): FE22 / FE21 / FE16 / FE14 / FE10 / FE07 / FD26
Available Kernels (One-Click Format): FE22 / FE21 / FE16 / FE14 / FE10 / FE07 / FD26
ICS - Calkulin's Rogue Recovery Repack *Thanks to Calkulin!
Developer Thread/Site: http://forum.xda-developers.com/showthread.php?t=1527041
Available Kernels (ZIP Format): FE22 / FD02
Available Kernels (TAR Format): FE22 / FD02
Available Kernels (One-Click Format): FE22 / FD02
ICS - Rogue Repacked Kernels *Thanks to Steady Hawkin and Team Rogue!
Developer Thread/Site: http://forum.xda-developers.com/showthread.php?t=1563547
Notes: DO NOT USE THESE KERNELS TO FLASH! For more information on why you shouldn't flash with these kernels Please refer back to the "How Not To Brick Your EFGT" thread.
Available Kernels (ZIP Format): FC22 / FC18 / FC07 / FC06 / FB27 / FB21 (Rev 2) / FB17 / FB15
Available Kernels (TAR Format): FD02 / FC22 / FC18 / FC07 / FC06 / FB27 / FB21 (Rev 2) / FB21 (Rev 1) / FB17 / FB15
Available Kernels (One-Click Format): FD02 / FC22 / FC18 / FC07 / FC06 / FB27 / FB21 (Rev 2) / FB21 (Rev 1) / FB17 / FB15
ICS - Touch-Wiz TeamWin Recovery Project Kernels *Thanks to Dees_Troy!
Developer Thread/Site: http://forum.xda-developers.com/showthread.php?t=1705278 & http://teamw.in/
Notes: This is a Custom Touch Recovery built for Touch-Wiz. It is based on the TWRP CM9 Recovery and has not been heavily tested on Touch-Wiz. Proceed with caution!
Available Kernels (TAR.MD5 Format): FF11
Available Kernels (One-Click Format): FF11
ICS CM9 Kernels
ICS - CM9 Kernels *Thanks to darchstar and Barnacles10!
Developer Thread/Site: http://forum.xda-developers.com/showthread.php?t=1563658
Available Kernels (ZIP Format): FF09 / FF02 / FE22 / FE21 / FE16 / FE07 / FD10
Available Kernels (TAR and TAR.MD5 Format): FF11 / FF09 / FF02 / FE22 / FE21 / FE16 / FE07 / FD10 / FD05
Available Kernels (One-Click Format): FF11 / FF09 / FF02 / FE22 / FE21 / FE16 / FE07 / FD10 / FD05
ICS - Chris41g's CWM6 AOSP Recovery Kernel *Thanks to Chris41g!
Developer Thread/Site: http://forum.xda-developers.com/showthread.php?t=1760299
Notes: This is a safe version of CWM for CM9 and AOKP.
Available Kernels (ZIP Format): RC2.5 / RC2
Available Kernels (TAR Format): RC2.5 / RC2
Available Kernels (One-Click Format): RC2.5 / RC2
ICS - Chris41g's CWM5 AOSP Recovery Kernel *Thanks to Chris41g!
Developer Thread/Site: http://forum.xda-developers.com/showthread.php?t=1760299
Notes: This is a safe version of CWM for CM9 and AOKP.
Available Kernels (ZIP Format): FF18
Available Kernels (TAR Format): FF18
ICS - CM9 CWM Recovery *Thanks to Shabbypenguin, Darchstar and Sbrissen!
Developer Thread/Site: http://forum.xda-developers.com/showthread.php?t=1563658
Notes: This is a safe version of CWM for CM9. No more going back to EL26 as long as you use these kernels.
Available Kernels (TAR.MD5 Format): FF18 / FF11
Available Kernels (One-Click Format): FF18 / FF11
ICS - CM9 TeamWin Recovery Project Kernels" *Thanks to Dees_Troy!
Developer Thread/Site: http://forum.xda-developers.com/showthread.php?t=1705278 & http://teamw.in/
Notes: This is a Custom Touch Recovery built for CM9. It does not have modem flashing functionality and some update ZIP files need to be converted before flashing. These kernels are not 100% compatible with AOKP (there have been reports you lose 4G after flashing).
Available Kernels (TAR.MD5 Format): FF18 / FF11
Available Kernels (One-Click Format): FF18 / FF11
ICS - CM9 Agat's Recovery Kernels" *Thanks to agat63!
Developer Thread/Site: http://forum.xda-developers.com/showthread.php?t=1721340
Available Kernels (ZIP Format): FF11
Available Kernels (TAR Format): FF11
Available Kernels (One-Click Format): FF11
ICS - CM9 Rogue Recovery *Thanks to Steady Hawkin and Team Rogue!
Developer Thread/Site: http://forum.xda-developers.com/showthread.php?t=1563547
Notes: DO NOT USE THESE KERNELS TO FLASH! For more information on why you shouldn't flash with these kernels please refer back to the "How Not To Brick Your EFGT" thread.
Available Kernels (ZIP Format): FB17
Available Kernels (TAR.MD5 Format): FB17
Available Kernels (One-Click Format): FB17
ICS AOSP/AOKP Kernels
ICS - AOSP/AOKP Kernels *Thanks to T.C.P!
Developer Thread/Site: http://forum.xda-developers.com/showthread.php?t=1514665
Notes: These kernels are not 100% compatible with CyanogenMod or CodeName Android. See this post by slick4mitch for clarification.
Available Kernels (ZIP Format): FF02 / FE22 / FE21 / FE16 / FE14 / FE10 / FE07 / FD26 / FD24 / FD19 / FD16 / FD10
Available Kernels (TAR.MD5 Format): FF02 / FE22 / FE21 / FE16 / FE14 / FE10 / FE07 / FD26 / FD24 / FD19 / FD16 / FD10
Available Kernels (One-Click Format): FF02 / FE22 / FE21 / FE16 / FE14 / FE10 / FE07 / FD26 / FD24 / FD19 / FD16 / FD10
ICS - AOSP/AOKP times_infinity TWRP Repack Kernels *Thanks to times_infinity!
Available Kernels (TAR.MD5 Format): FF18 (rev 2) / FF18 (rev 1)
Available Kernels (One-Click Format): FF18 (rev 2) / FF18 (rev 1)
GB Touch-Wiz Based Kernels
GB - Stock/Touch-Wiz Kernels (Official)
Available Kernels (ZIP Format): EL29 / EL26 / EL13 / EK02 / EG30
Available Kernels (TAR.MD5 Format): EL29 / EL26 / EL13 / EK02 / EG30
Available Kernels (One-Click Format): EL29 / EL26 / EL13 / EK02 / EG30
GB - Chris41g Stock CWM5 Repacked Kernels *Thanks to Chris41g!
Developer Thread/Site: http://forum.xda-developers.com/showthread.php?t=1416056
Available Kernels (ZIP Format): EL26 / EL13 / EK02 / EG31 / EG30
Available Kernels (TAR Format): EL26 / EL13 / EK02 / EG31 / EG30
Available Kernels (One-Click Format): EL26 / EL13 / EK02 / EG31 / EG30
GB - Chris41g ACS Recovery Repacked Kernels *Thanks to Chris41g!
Developer Thread/Site: http://forum.xda-developers.com/showthread.php?t=1416056
Available Kernels (ZIP Format): EL26 / EL13 / EK02 / EG31 / EG30
Available Kernels (TAR Format): EL26 / EL13 / EK02 / EG31 / EG30
Available Kernels (One-Click Format): EL26 / EL13 / EK02 / EG31 / EG30
GB - Rogue Repacked Stock Touch-Wiz Kernels *Thanks to Steady Hawkin and Team Rogue!
Developer Thread/Site: http://forum.xda-developers.com/showthread.php?t=1563547
Available Kernels (ZIP Format): EL29 / EL26 / EL13 / EK02
Available Kernels (TAR.MD5 Format): EL29 / EL26 / EL13 / EK02
Available Kernels (One-Click Format): EL29 / EL26 / EL13 / EK02
GB - Rogue Recovery Kernels (Kernels built from Source) *Thanks to Steady Hawkin and Team Rogue!
Developer Thread/Site: forum.xda-developers.com/showthread.php?t=1341564
Notes: The 1.5.0 Hitman kernel is based on CWM Touch 5.8.1.5 it is NOT to be confused with the Touch Recovery included in ROM Manager! There are no verifiable reported instances of this kernel causing bricks!
Available Kernels (ZIP Format): 1.4.1 (Gunslinger) / 1.4.0 (Gunslinger) / 1.3.0 (Desperado) / 1.1.3 (Outlaw) / 1.1.1 (Renegade)
Available Kernels (TAR & TAR.MD5 Format): 1.5.0 (Hitman) / 1.4.1 (Gunslinger) / 1.4.0 (Gunslinger) / 1.3.0 (Desperado) / 1.1.3 (Outlaw) / 1.1.1 (Renegade)
Available Kernels (One-Click Format): 1.5.0 (Hitman) / 1.4.1 (Gunslinger) / 1.4.0 (Gunslinger) / 1.3.0 (Desperado) / 1.1.3 (Outlaw) / 1.1.1 (Renegade)
GB - Touch-Wiz TeamWin Recovery Project Kernels *Thanks to Dees_Troy!
Developer Thread/Site: http://forum.xda-developers.com/showthread.php?t=1705278 & http://teamw.in/
Notes: This is a Custom Touch Recovery built for Touch-Wiz. It is based on the TWRP CM9 Recovery and has not been heavily tested on Touch-Wiz. Proceed with caution!
Available Kernels (TAR.MD5 Format): EL29
Available Kernels (One-Click Format): EL29
GB - Direct Boot CWM *Thanks to noobnl!
Developer Thread/Site: http://forum.xda-developers.com/showthread.php?t=1677418
Notes: After flashing phone will automatically boot into a EL29 based GB recovery (no more need to hold down power and volume up).
Available Kernels (TAR.MD5 Format): EL29
Available Kernels (One-Click Format): EL29
GB - Chris41g LoStKernel Kernels *Thanks to Chris41g!
Developer Thread/Site: http://forum.xda-developers.com/showthread.php?t=1296348
Available Kernels (ZIP Format): LoStKernel 1.0.1.0 / LoStKernel 1.0.1.1 / LoStKernel 1.0.1.2 / LoStKernel 1.0.1.3 / LoStKernel 1.0.2.0 / LoStKernel 1.0.2.1 / LoStKernel 1.0.2.2 / LoStKernel 1.0.2.3 / LoStKernel 1.0.2.4
Available Kernels (TAR Format): LoStKernel 1.0.1.0 / LoStKernel 1.0.1.1 / LoStKernel 1.0.1.2 / LoStKernel 1.0.1.3 / LoStKernel 1.0.2.0 / LoStKernel 1.0.2.1 / LoStKernel 1.0.2.2 / LoStKernel 1.0.2.4
Available Kernels (One-Click Format): LoStKernel 1.0.1.0 / LoStKernel 1.0.1.1 / LoStKernel 1.0.1.2 / LoStKernel 1.0.1.3 / LoStKernel 1.0.2.0 / LoStKernel 1.0.2.1 / LoStKernel 1.0.2.2 / LoStKernel 1.0.2.4
GB - Zedomax Custom Kernels *Thanks to Zedomax!
Developer Thread/Site: forum.xda-developers.com/showthread.php?t=1269437
Notes: These Kernels are VERY old and should generally NOT be used. They have the potential to seriously mess up your phone. They are included here by user request and for informational purposes only.
Available Kernels (ZIP Format): Zedomax Kernel 6.02 (Beta) / Zedomax Kernel 6.01 (Beta) / Zedomax Kernel 3.0
Available Kernels (TAR Format): Zedomax Kernel 4.1 (Beta) / Zedomax Kernel 4.0 (Beta) / Zedomax Kernel 3.0 / Zedomax Kernel 2.0 / Zedomax Kernel 1.0
Available Kernels (One-Click Format): Zedomax Kernel 6.02 (Beta) / Zedomax Kernel 6.01 (Beta) / Zedomax Kernel 4.1 (Beta) / Zedomax Kernel 4.0 (Beta) / Zedomax Kernel 3.0 / Zedomax Kernel 2.0 / Zedomax Kernel 1.0
Once again, I am not the developer of any of these kernels and I don't want to take the credit for them. I'm just putting them here in one place for the community's benefit.
Thanks goes to (in no particular order): SexTape, Chris41g, Agat63, sfhub, Calkulin, Zedomax, kc_exactly, Steady Hawkin, T.C.P., qkking77, ReActiveDisorder, Chainfire, slick4mitch, darchstar, barnacles10,koch, im0rtalz, timmetal6669, Dees_Troy, PhantomPhreak53, shabbypenguin, datajosh, times_infinity, Rujelus22, Sleshepic, The Real Sitek and all of our other awesome developers and contributors! Thank you for all the hard work you do for our community!
If there's anyone I've missed send me a PM and they will be added!
Thanks and good luck!

***How to flash an ICS ZIP update kernel***
***How to flash an ICS or GB TAR, MD5 or TAR.MD5 update kernel***
***How to flash a One-Click.EXE update kernel***
***How to flash a zImage update kernel***
***How to flash a Boot.IMG update kernel***

Reserved - Just in case.

Nice idea to consolidate everything. With the added organization I think it's time to start thinking about getting all this stuff put into the Wiki rather than a bunch of stickied threads though.

is that your personal dropbox? if you need somewhere to host that stuff let me know.. you can put it on chris41g.devphone.org

Agat's new repack should be there. It's great

The Root said:
Agat's new repack should be there. It's great
Click to expand...
Click to collapse
I was actually going to be adding Agat's, sfhub's and Reactive Disorder's here in the next little bit. I had to take a quick break and spend some time with my wife.
They will be up soon!

Glad you did this, thanks for taking the time .

Since you didn't post any CM kernels and said that the AOKP kernels repacked by T.C.P are not compatible with CM, I can personally say that they are compatible but you must have SuperSU install before flashing any of those kernels or you will lose root and 4G, that is all

Fantastic idea, goes nicely with the stickied modem thread (hint hint).
Thanks for putting this together.

Yep! This needs to be stickied!

So about those cm9 kernels.... anyone care to point them out... I'm on cm9 a4 and can't seem to locate the fe16 cm9 kernel
Sent from my SPH-D710 using xda premium

neverends said:
So about those cm9 kernels.... anyone care to point them out... I'm on cm9 a4 and can't seem to locate the fe16 cm9 kernel
Sent from my SPH-D710 using xda premium
Click to expand...
Click to collapse
The AOSP FE16 will work on CM9.
Anyways, great thread... I hope it's stickied

neverends said:
So about those cm9 kernels.... anyone care to point them out... I'm on cm9 a4 and can't seem to locate the fe16 cm9 kernel
Sent from my SPH-D710 using xda premium
Click to expand...
Click to collapse
I'm not much of a CM guy myself so I don't have any on hand but let me see what I can scrounge up.

Made a new place to host these, so he doesnt have to use his drop box, so hopefully wont be long they will get moved over.. should be pretty fast too..

chris41g said:
Made a new place to host these, so he doesnt have to use his drop box, so hopefully wont be long they will get moved over.. should be pretty fast too..
Click to expand...
Click to collapse
Uploading now! Thanks Chris!

This is from cm9 thanks goes to Creator barnacles I'm just the mule
http://www.mediafire.com/download.php?gc45hz5k1f3hv58
This zip auto reboots too.
ROM: AOKP Build 36
Kernel: FE16
Modem: FE16
Recovery: EL26 CWM

Thanks for this, is there an FE16 kernel for AoSP/AoKP that will support custom boot animations? I was t sure if the acs repackaged or sfhub repacked will work on AoKPm5..
sj
Sent from my SGS2 Epic 4G Touch on AoKPm5 FE16 OS4.0.4 with dpi @ 128 using [email protected] 2.1.1 Pro

How safe is the method of using e4gtauto to flash the el26 kernel? compared to mobil odin?

bout time someone did this! THANK YOU sooo much!

Develop Bugs

welcome

[KERNEL/RECOVERY][ICS] Rogue Stock FB27 (Updated 3/5/12) - Samsung Epic 4G Touch

that was quick, on EL13 modem, flashing the kernel now

yep just grabbed this about to flash it in a few minutes. Thanks for the quick update Steady you rock man

Anyone else notice that the jig no longer resets the download counter or is it just me? Either way nice work Hawkin

bavarianblessed said: Anyone else notice that the jig no longer resets the download counter or is it just me? Click to expand... Click to collapse Damn not good

bavarianblessed said: Anyone else notice that the jig no longer resets the download counter or is it just me? Either way nice work Hawkin Click to expand... Click to collapse Mine worked.

I flashed Calk 's EL13 modem only, so Should I flash Rogue EL13 kernel? Sent from my SPH-D710 using xda premium

does this stop the stock bootanimation.qmg from working?

crawrj said: Mine worked. Click to expand... Click to collapse What ROM base are you running crawrj?

Dchibro said: What ROM base are you running crawrj? Click to expand... Click to collapse Using Calk's deodexed rom, EL13 modem and this kernel. I also cleared it on ek02 cwm kernel on the same system.

I have also flashed the new modem and Rogue kernel without any obvious unwanted side effects although I haven't really had a chance to test this out to determine if I'm experiencing any benefits.

Related

[KERNEL/RECOVERY][ICS] Rogue Stock FC06 (New 3/8/12)

[KERNEL/RECOVERY][ICS] Rogue Stock FC07 (New 3/10/12)

[KERNEL/RECOVERY][ICS] Rogue Stock FC18 (New 3/20/12)

[KERNEL/RECOVERY][ICS] Rogue Stock FC22 (New 3/24/12)

[KERNEL][CWM][ODIN] Kernel Repository - Download Them All Here! (SPH-D710)

Categories

Resources

Develop Bugs

welcome

[KERNEL/RECOVERY][ICS] Rogue *Stock FB27* (Updated 3/5/12) - Samsung Epic 4G Touch

that was quick, on EL13 modem, flashing the kernel now

yep just grabbed this about to flash it in a few minutes. Thanks for the quick update Steady you rock man

Anyone else notice that the jig no longer resets the download counter or is it just me? Either way nice work Hawkin

bavarianblessed said: Anyone else notice that the jig no longer resets the download counter or is it just me? Click to expand... Click to collapse Damn not good

bavarianblessed said: Anyone else notice that the jig no longer resets the download counter or is it just me? Either way nice work Hawkin Click to expand... Click to collapse Mine worked.

I flashed Calk 's EL13 modem only, so Should I flash Rogue EL13 kernel? Sent from my SPH-D710 using xda premium

does this stop the stock bootanimation.qmg from working?

crawrj said: Mine worked. Click to expand... Click to collapse What ROM base are you running crawrj?

Dchibro said: What ROM base are you running crawrj? Click to expand... Click to collapse Using Calk's deodexed rom, EL13 modem and this kernel. I also cleared it on ek02 cwm kernel on the same system.

I have also flashed the new modem and Rogue kernel without any obvious unwanted side effects although I haven't really had a chance to test this out to determine if I'm experiencing any benefits.

Related

[KERNEL/RECOVERY][ICS] Rogue *Stock FC06* (New 3/8/12)

[KERNEL/RECOVERY][ICS] Rogue *Stock FC07* (New 3/10/12)

[KERNEL/RECOVERY][ICS] Rogue *Stock FC18* (New 3/20/12)

[KERNEL/RECOVERY][ICS] Rogue *Stock FC22* (New 3/24/12)

[KERNEL][CWM][ODIN] Kernel Repository - Download Them All Here! (SPH-D710)

Categories

Resources

[KERNEL/RECOVERY][ICS] Rogue Stock FB27 (Updated 3/5/12) - Samsung Epic 4G Touch

[KERNEL/RECOVERY][ICS] Rogue Stock FC06 (New 3/8/12)

[KERNEL/RECOVERY][ICS] Rogue Stock FC07 (New 3/10/12)

[KERNEL/RECOVERY][ICS] Rogue Stock FC18 (New 3/20/12)

[KERNEL/RECOVERY][ICS] Rogue Stock FC22 (New 3/24/12)