Develop Bugs

[Q] EI22 rotation lag?

EI22 rotation lag!!!!i am noticing a lag rotating my phone when it come to me turning my phone from horizontal to straight up...i have done the horizontal calibration but still there is a lag...my question is ....is there a lag fix for this and yes i am running EI22 with the EI22 modem?

galaxyd700 said:
i am noticing a lag rotating my phone when it come to me turning my phone from horizontal to straight up...i have done the horizontal calibration but still there is a lag...my question is ....is there a lag fix for this and yes i am running EI22 with the EI22 modem?
Click to expand...
Click to collapse
First, can you make your title more clearer...Like EI22 rotation lag?
And second, try the calibration again. I haven't seen mention of this yet, but if more users show up with it then I am sure someone will make a lag fix on it.

Well I'll throw my vote in on this... I have lag and hor. cal. doesn't do it.

galaxyd700 said:
EI22 rotation lag!!!!i am noticing a lag rotating my phone when it come to me turning my phone from horizontal to straight up...i have done the horizontal calibration but still there is a lag...my question is ....is there a lag fix for this and yes i am running EI22 with the EI22 modem?
Click to expand...
Click to collapse
Have you tried doing the horizontal calibration with the screen upside down? That used to fix my rotation lags on froyo. Something about using it with the screen facing up always made it lag instead of fixing it.. If that don't work u might have to try using terminal emulator and see if that helps.
Sent from my SPH-D700 using XDA App

See Gingerbread Horizontal Calibration and these posts: my calibration question and jbadboy2007's response and jt1134's rebuttal.
The short story is that there is no known calibration method for GB, whether on a stock-based ROM or AOSP, such as CM7.
* Note: jt1134 is one of the CM7 devs, therefore I feel pretty confident he knows what he's talking about. I'm pretty sure jbadboy2007 is experienced as well.

Did you experience lag on froyo at all or is this a new thing?
Sent from my SPH-D700 using XDA App

Librizzi said:
Did you experience lag on froyo at all or is this a new thing?
Click to expand...
Click to collapse
I don't know if you're addressing the OP or me (probably OP), but I'll go ahead and tell ya I had rotation lag with a couple of different Froyo ROM flashes.
using the /system/bin/sensorcalibutil_yamaha I was always able to minimize the lag, though if I had a number of different home screens filled with apps it would still lag a bit more than a virgin ROM flash (not unexpected).
The "new thing" is that now there is no known fix for rotation lag*, which sucks.
* At least with CM7. The sensorcalibutil_yamaha fix may still work with stock-based ROMs in GB, I've just never tried any GB except for CM7.

AmericanJedi001 said:
I don't know if you're addressing the OP or me (probably OP), but I'll go ahead and tell ya I had rotation lag with a couple of different Froyo ROM flashes.
using the /system/bin/sensorcalibutil_yamaha I was always able to minimize the lag, though if I had a number of different home screens filled with apps it would still lag a bit more than a virgin ROM flash (not unexpected).
The "new thing" is that now there is no known fix for rotation lag*, which sucks.
* At least with CM7. The sensorcalibutil_yamaha fix may still work with stock-based ROMs in GB, I've just never tried any GB except for CM7.
Click to expand...
Click to collapse
I tried the /system/bin/sensorcalibutil_yamaha cmd with terminal emulator. Says the cmd is not found :-(

Bringing this thread back I guess, instead of making a new one. I'm having a big issue with 2-3 second rotation lag. Tried the upside down horizontal calibration and no go. Just throwing my hat in the ring in hopes that someone will find a fix.

There was a thread opened for the issue.
Refer to the link below.
Hope it helps!
http://forum.xda-developers.com/showthread.php?t=1347012

Alias8818 said:
There was a thread opened for the issue.
Refer to the link below.
Hope it helps!
http://forum.xda-developers.com/showthread.php?t=1347012
Click to expand...
Click to collapse
That's for cm7.
Sent from my Samsung Legen-wait for it-dary! 4g

ac16313 said:
That's for cm7.
Sent from my Samsung Legen-wait for it-dary! 4g
Click to expand...
Click to collapse
From the original thread:
* For other GB ROMs the fix should be basically the same, though I would recommend using the framework.jar from that specific ROM. (Maybe other, more experienced devs would like to shed some light on this topic? Would this framework.jar or flashable .zip be safe to try with other GB ROMs?)
So it may be usable...

Bumping this. Rotation lag is the most annoying issue with GB thus far

adamdelozier said:
From the original thread:
* For other GB ROMs the fix should be basically the same, though I would recommend using the framework.jar from that specific ROM. (Maybe other, more experienced devs would like to shed some light on this topic? Would this framework.jar or flashable .zip be safe to try with other GB ROMs?)
So it may be usable...
Click to expand...
Click to collapse
It might work it will break some things though, and he said the fix should be the same, meaning what he did should be the same to fix lag on other ROMs. Which it is.
Sent from my Samsung Legen-wait for it-dary! 4g

Holding phone upsidedown on a flat surface and calibrating fixed my issue completely.
Sent from my SPH-D700 using Tapatalk

flastnoles11 said:
Holding phone upsidedown on a flat surface and calibrating fixed my issue completely.
Sent from my SPH-D700 using Tapatalk
Click to expand...
Click to collapse
Did not work for me...

Bumping this again. Praying that someone can make a fix for this issue. It is plaguing my experience. Otherwise it is outstanding. I repeatedly tried the upside down calibration and it has not worked.

The framework.jar from my rom has the fix. Take that file and then calibrate on a flat surface.
Sent from my SPH-D700 using Tapatalk

That's weird, I'm actually on your V4 ROM now. I could possibly reflash. Or I guess I could just drop that file over the old one, that's prob easier. Or maybe time to upgrade to V5 huh. Thanks for the response.
---------- Post added at 11:12 PM ---------- Previous post was at 10:43 PM ----------
Ok so, wow. I dropped the same framework.jar I already had over the old one, and the calibration tool in settings> display works. Very weird. But someone should mark this as solved in case it needs to be done separate from flashing a ROM.

marcusant said:
The framework.jar from my rom has the fix. Take that file and then calibrate on a flat surface.
Sent from my SPH-D700 using Tapatalk
Click to expand...
Click to collapse
Flashed ICS v5 and my rotation lag issue is gone Yay!

[Q] Andy-83.apk

the ti-83 emulator is not working and causing my phone to crash and freeze, i have to remove the battery to get it back right...
why is this happening if i ran it just fine on evo and epic 4g...?
i'm running Calkulin's E4GT v2.8.1 EL29 with desperado 1.704ghz kernel.
Any substitute? Another maybe better calculator app? Please and thanks!

kj13569 said:
the ti-83 emulator is not working and causing my phone to crash and freeze, i have to remove the battery to get it back right...
why is this happening if i ran it just fine on evo and epic 4g...?
i'm running Calkulin's E4GT v2.8.1 EL29 with desperado 1.704ghz kernel.
Any substitute? Another maybe better calculator app? Please and thanks!
Click to expand...
Click to collapse
I am limited in my knowledge with apps, but I do know that if the app is not programmed to work with your hardware (if its not universal) then the app developer just needs to update to work on the newer hardware, email the dev and wait that is all you can do

rayprobg said:
I am limited in my knowledge with apps, but I do know that if the app is not programmed to work with your hardware (if its not universal) then the app developer just needs to update to work on the newer hardware, email the dev and wait that is all you can do
Click to expand...
Click to collapse
I want to thank you for your response. i am pretty sure i am not the first person to run into this issue. after 217 views i finally get an answer. what calc do you use? any recommendations? this app is no longer on the Market...so no support for it...

CM 7.2 RC1 officially

So I saw through Reddit that they were releasing this for like 70 devices. Anyone try it? How similar is it to the various KANG builds we have for our device?
I'm downloading now, so ill post my thoughts.
Sent from my Incredible 2 using XDA

so far it seems to be very similar to the Kangs. It does feel a teeny bit more responsive than those others.
The low volume on call bug is still present, but flashing aeroeven's .8 kernel fixes this just as it does in the KANG builds.
I didn't experience the multi touch issue that seems to be plaguing some users, but for what it's worth i didn't experience it on the KANG builds either.
The keyboard didn't stick for me while typing at all. i spent about 5 minutes typing random words into an email and it didn't stick once.
Edit: when logging into I heart radio the keyboard was sticky as hell.
one thing i've noticed is that once the market finally switches to google play, the label says Market, but it has the play icon.

excuse a newb
So I downloaded and installed 7.2 but when I try to add a new account to sync, it says it cant connect to the server. Ideas?
Also, what is this flashing kernel to get rid of low in-call volume?
Thanks!

deerhunter1911a1 said:
So I downloaded and installed 7.2 but when I try to add a new account to sync, it says it cant connect to the server. Ideas?
Also, what is this flashing kernel to get rid of low in-call volume?
Thanks!
Click to expand...
Click to collapse
I haven't experianced the server issue. maybe it was a bad flash, make sure you wipe data before hand.
aeroeven's .8 kernel over at rootzwiki

thenaut said:
I haven't experianced the server issue. maybe it was a bad flash, make sure you wipe data before hand.
aeroeven's .8 kernel over at rootzwiki
Click to expand...
Click to collapse
thats what i thought too, but i did a nandroid backup, factory data reset, then installed zip from sd...i had a few bad downloads that didnt work, but this is the second time it did work and second time no server...
ill look for that kernel! Thanks!

deerhunter1911a1 said:
thats what i thought too, but i did a nandroid backup, factory data reset, then installed zip from sd...i had a few bad downloads that didnt work, but this is the second time it did work and second time no server...
ill look for that kernel! Thanks!
Click to expand...
Click to collapse
Check the md5 sum as well.
Sent from my ADR6350 using XDA

thenaut said:
I haven't experianced the server issue. maybe it was a bad flash, make sure you wipe data before hand.
aeroeven's .8 kernel over at rootzwiki
Click to expand...
Click to collapse
Should we use the CFS or BFS kernel?

dimitri407 said:
Should we use the CFS or BFS kernel?
Click to expand...
Click to collapse
I'm using the .8 bfs at this time with good results, but you can use the cfs as well. Either will work, just different schedulers.

and....im a moron and just never flashed google apps. rom works perfectly.

I personally like kangs release better than this. I use swiftly x for my keyboard, and many times it lags when I type. Opera Web browser doesn't work for me, which is the browser I prefer. Long wait time switching between wifi and 3G. These are the issues I am having. Yes I wiped everything coming from kangs build before flashing this. I tried "fix permissions " and even uninstalled and reinstalled the apps that were misbehaving, but nothing has fixed these problems.
Sent from my DINC2

I tried the official build but it wasn't surprising to me that the most of the same issues that plague all cm7 builds for this phone are still present and the custom kernels don't really help to fix the problems. Im just going to stick with sense some more until cm works some of them out.
Sent from my ADR6350 using Tapatalk

What do you feel is missing?
Sent from my ADR6350 using Tapatalk

A fix for the use of wireless tether v2.0.7. The overall feel of cm just isn't there. Its not quite as smooth as I remember and I really hate that when I listen to music and try to do other things it causes the music to lag for a second. The call volume was still very low which I figured would be something they would address but they didnt. Wireless tether app not working is pretty much a deal breaker for me though. I have to use my phone for my home internet and the hotspot just isn't a very reliable connection most of the time and its very annoying to get disconnected and have to reconnect constantly.
Sent from my ADR6350 using Tapatalk

I found RC1 to be more stable than the last stable 7.1.0.1 release. Everything works for me including wireless tether, and I have not had any stability issues. The compass issue is also gone, which is a welcome change for me. (Trying to navigate Boston on St. Patty's after a few green beers via a compass that always points the wrong direction was not particularly easy.)
The only thing I have noticed is that the FM Radio will force close periodically if a notification noise chimes while I am listening, but it did that on 7.1.0.1, too. However, on 7.1.0.1, it would require a reboot rather than simply reopening the app. All in all, I'm pretty stoked. I am looking forward to stable and CM9 (hopefully) down the road.

General_Tso said:
I found RC1 to be more stable than the last stable 7.1.0.1 release. Everything works for me including wireless tether, and I have not had any stability issues. The compass issue is also gone, which is a welcome change for me. (Trying to navigate Boston on St. Patty's after a few green beers via a compass that always points the wrong direction was not particularly easy.)
The only thing I have noticed is that the FM Radio will force close periodically if a notification noise chimes while I am listening, but it did that on 7.1.0.1, too. However, on 7.1.0.1, it would require a reboot rather than simply reopening the app. All in all, I'm pretty stoked. I am looking forward to stable and CM9 (hopefully) down the road.
Click to expand...
Click to collapse
So the wireless tether app v2.0.7 works for you. Since I've had this phone every kang I've tried hasn't worked and the official still doesn't work so how did you fix it?
Sent from my ADR6350 using Tapatalk

thenaut said:
I haven't experianced the server issue. maybe it was a bad flash, make sure you wipe data before hand.
aeroeven's .8 kernel over at rootzwiki
Click to expand...
Click to collapse
I have been in search of a good kernal, but aeroevan's link on rootzwiki aren't working. I was running Skyraider Zeus but just switched to CM7.1.0.1 and was going to try the Tiamat kernal, but just saw that 7.2 was up. Any thoughts on whether I should switch to 7.2 and where I can get the aeroevan kernal if the link isn't working?

brymaster5000 said:
I have been in search of a good kernal, but aeroevan's link on rootzwiki aren't working. I was running Skyraider Zeus but just switched to CM7.1.0.1 and was going to try the Tiamat kernal, but just saw that 7.2 was up. Any thoughts on whether I should switch to 7.2 and where I can get the aeroevan kernal if the link isn't working?
Click to expand...
Click to collapse
Shoot me a pm and I can share a link with you from my box account to both the bfs and cfs versions.
Sent from my ADR6350 using Tapatalk

General_Tso said:
I found RC1 to be more stable than the last stable 7.1.0.1 release. Everything works for me including wireless tether, and I have not had any stability issues. The compass issue is also gone, which is a welcome change for me. (Trying to navigate Boston on St. Patty's after a few green beers via a compass that always points the wrong direction was not particularly easy.)
The only thing I have noticed is that the FM Radio will force close periodically if a notification noise chimes while I am listening, but it did that on 7.1.0.1, too. However, on 7.1.0.1, it would require a reboot rather than simply reopening the app. All in all, I'm pretty stoked. I am looking forward to stable and CM9 (hopefully) down the road.
Click to expand...
Click to collapse
You better belive we will have a stable version. HTC has announced that we will get ics. And cm is still being developed for our phone despite the fact that they will have to redo a lot when the right drivers are released. Looking forward to it. Hopefully the camera won't suck.
Sent from my ADR6350 using XDA

I'm not doubting we will have a working version I just don't see the really awesome versions until we get an official release or a leak. I'm going to hold out on an ics until something official comes out.
Sent from my ADR6350 using Tapatalk

disconnecktie said:
So the wireless tether app v2.0.7 works for you. Since I've had this phone every kang I've tried hasn't worked and the official still doesn't work so how did you fix it?
Sent from my ADR6350 using Tapatalk
Click to expand...
Click to collapse
I am using the factory tethering option at Settings -> Wireless & networks -> Tethering & portable hotspot. I have had good luck with that. Is there a reason you are going with this particular app rather than the "stock" option?
joefrog1996 said:
You better belive we will have a stable version. HTC has announced that we will get ics. And cm is still being developed for our phone despite the fact that they will have to redo a lot when the right drivers are released. Looking forward to it. Hopefully the camera won't suck.
Sent from my ADR6350 using XDA
Click to expand...
Click to collapse
I have read HTC's announcement. I say "hope," because I am going from Cyanogen's "Will [insert device] get CyanogenMod 9?" flow chart (see Ricard Cerqueira's Google+ page). Even with the release of ICS, there is still only a 75% chance. The only devices that are certain at this point are those that already have CM9 nightlies. Given HTC's slowness releasing kernels, etc. and my general cynical disposition, I'll believe it when I see nightlies released for the Incredible 2.

What's on FD26 - FD26 is out there

http://device.sprintpcs.com/Samsung/SPH-D710/FD26.rdf
Just found!
It's good thing because many users complained about FD24 and I hope FD26 solved many issues on FD24.
Update - download sfhub's FD26 Rooted Stock one-click odin package from here - http://forum.xda-developers.com/showthread.php?t=1623684
Scrolling - Scrolling is just fine but too fast! As result of that, hard to read/find what's moving during the scrolling (just for few millisecond, there's image overlapping - same image displayed twice - one is moving ahead and another one is following, echoing effect?)
Camera - I see that camera app has not been changed. Please report if you see any issue
Bluetooth - please test and report
Wifi wakeup issue - for any users having wifi wakeup issue, please report. Be sure that you don't have any battery saver app activated. Lots of times, batter saver app causes the problem on wifi (for example, wifi shows it's not connected but it's still connected, etc...)
Chrome browser users? Try with downloading newest version!
*New*
*Fixed*
.flac works with sound player (by kobridge)
scrolling is better than FD24 (by many users)
.wmv playback seems to work again (Kingdazy)
some people reported that bluetooth connection is better than before
.flv playback and ramdom menu showing while watching videos fixed (Omar04)
*Still Issue*
Social Hub widget issue?
when using stock ics launcher and you choose a Twiz Wallpaper it always shows zoom in (Omar04)
*Owesome*
some people reported that 3G/4G is better than FD24 or previous version
*Garbage*

i know complaining about getting updates will get me shot, but i'm am getting tired of it hah, just want it to come to a final already. thanks for the info

So,
kc, agat, sfhub, calk, who's going to be a first guy at this time?

kobridge said:
So,
kc, agat, sfhub, calk, who's going to be a first guy at this time?
Click to expand...
Click to collapse
Agat from what I have seen usually pulls from SFHub or Calk unless I missed something? Calk and SFHUB almost always have the same builds around the same time but then there is that mixture of Sextape in the past that fragmented that a little.
Yeah im totally waiting on a PM about "files up" lol it happens when i go to bed.

RainMotorsports said:
Agat from what I have seen usually pulls from SFHub or Calk unless I missed something? Calk and SFHUB almost always have the same builds around the same time but then there is that mixture of Sextape in the past that fragmented that a little.
Yeah im totally waiting on a PM about "files up" lol it happens when i go to bed.
Click to expand...
Click to collapse
That's true. It looks like kc_exactly also got the source access. So, he could be the first one also if he just pull out the original and release it.
As you've seen, Sextape moved to Gnex. So no hope for him...

Lol which one will be the OTA?
Sent from my SPH-D710 using xda premium

Better question is who will be the first to complain that a new thread was started
You know it's gonna happen
Sent from my SPH-D710 using xda premium

locoboi187 said:
Lol which one will be the OTA?
Sent from my SPH-D710 using xda premium
Click to expand...
Click to collapse
This means that no OTA yet. I remember that someone told that there's OTA version available for every build. So, who knows until we see the open source!

Good Find standing by to download the first release by one of the devs.

kobridge said:
This means that no OTA yet. I remember that someone told that there's OTA version available for every build. So, who knows until we see the open source!
Click to expand...
Click to collapse
didn't someone post a log a little bit ago of testers responding re: bugs and issues?
I would guess there would have to be OTAs for each, for distribution to the testers. (ie, whomever they have testing that doesn't live in the labs. )

D'oh. Too soon. I like to savor a build for about 4 days before the next.
j/k.. let's get this thing finalized already.

Baddass let's get this rolling
______
-1988 Mustang GT hatch
Trick Flow Specialties Stage 1 cam, Frpp headers, o/r h pipe, Flowmaster 40s, gt40p heads/intake, Crane beehive springs, hardened pushrods, underdrive pulleys, no smog, electric fan, 70maf sensor, bbk 70mm throttle body, UPR castor camber plates, Hotchkins suspension, dual friction clutch, 3.73 gears Positraction, freezing cold AC

I'll just wait for the OTA version
Sent from my SPH-D710 using xda premium

[OTA]EL29 to FD24 update zip for Stock ICS!
Check out this link guys for the recent possible OTA I found the link think morning in the Development Tab.
http://forum.xda-developers.com/showthread.php?t=1619474

elzero26 said:
Check out this link guys for the recent possible OTA I found the link think morning in the Development Tab.
http://forum.xda-developers.com/showthread.php?t=1619474
Click to expand...
Click to collapse
Thanks, but most of us know about that.
That is exactly why we were discussing OTAs earlier in this very thread. (and others)

elzero26 said:
Check out this link guys for the recent possible OTA I found the link think morning in the Development Tab.
http://forum.xda-developers.com/showthread.php?t=1619474
Click to expand...
Click to collapse
Dude seriously? I mean thats as old as FD24, that was so 172,800 second ago.
Its an OTA, an OTA thats not getting release. Run it you will lose root and be on a stock build that you can't OTA out of. Thats okay you odin your way out of it but.

Are we there yet?

elzero26 said:
Check out this link guys for the recent possible OTA I found the link think morning in the Development Tab.
http://forum.xda-developers.com/showthread.php?t=1619474
Click to expand...
Click to collapse
Too old to be a new!

Imaginos said:
D'oh. Too soon. I like to savor a build for about 4 days before the next.
j/k.. let's get this thing finalized already.
Click to expand...
Click to collapse
Crap! Just loaded FD24. Guess I need to learn how to use ODIN to get me back to stock....24 seems to be ok to me. What are the known issues?

tpapa said:
Crap! Just loaded FD24. Guess I need to learn how to use ODIN to get me back to stock....24 seems to be ok to me. What are the known issues?
Click to expand...
Click to collapse
I think some people are still having notification bug and maybe turbo scroll. 24 is working fine for me. Heck, all the builds are, i don't use notification sounds lol
Sent from my SPH-D710 using xda premium

[Discussion] FI25 Leak

Thanks to rockypr for his idea to do this on FH23. List all the fixes, bugs, additions or whatever you want to discuss about the FI25 Leak.
I will start.
Additions/Changes:
1. Removed ability to choose between MTP or Mass Storage.
2. Removed the Back up and reset option under settings.
3. Much more stable! "rwilco12"
4. Feels super smooth !"rwilco12"
5. Picture messages now send on 3G. "rwilco12"
6. Connections seem to be much faster. "rwilco12"
7. Battery percentage icon is off by default again. "rwilco12"
8. Several updated bloatware apps. "rwilco12"
9. Connection Optimizer is removed. "tdunham"
10. Bootanimations appear to be working again. "tdunham"
11. Removed contact tab from dialer again. "manufan721"
12. Out of Office editing works again! "rwilco12"
13. Battery monitor for devs is removed. "rwilco12"
14. Sprint Zone has a voice. "rwilco12"
15. It seems they added an extra font called Helvetica Neue. "Dvin211"
Bugs/Issues:
1. The Recent Apps thing, where it isn't transparent if you have 3 or less apps in it, still exists.
2. The led notification light does not pulse while charging. "someguyatx"
3. Bluetooth is not functioning properly. "grncherry" For me it was constantly dropping the connection.
4. My WiFi just stopped connecting out of the blue.
Some quotes from the community:
Hmmm.....i flashed and it seemed laggy to me, modem worked great. "manufan721"
This modem really helped with low signal. "revamper"
Data speeds greatly improved and get signal before where i never used to! "elliwigy"
Holy crap this ROM is fricken smooth! Scrolling on it is nice finally! "daniel4653"
Coming from FI03 I'm finding this build to be laggy at times with a couple freeze ups when opening apps- Market , Gmail & Working in settings which reminds me of the young ICS bad days. Data transfer is slower. "sling"
I went back to FH13 today. FI25:not good modem. very slow. Some hicups opening apps. They took away some functions. :banghead: I did not feel much improvement from FH13 or to be more accurate from FI03. "Omar04"
Battery life has greatly increased. "IamFlynn"
I'll second Omar on the FH25 modem. Its terrible for me. The ROM is alright, a little bit smoother and more crisp than FH13, but not enough for me to change my daily setup. "boXerrumble "

The second sentence says FI03
Sent from my SPH-D710 using Tapatalk
Click here for custom mods for your E4GT

sniper said:
The second sentence says FI03
Sent from my SPH-D710 using Tapatalk
Click here for custom mods for your E4GT
Click to expand...
Click to collapse
nuhuh I changed it right after I posted it.

Hmmm.....i flashed and it seemed laggy to me, modem worked great(still on it), huge downgrade from fi03 on dialer pad going back to three selection buttons up top compared to the 4 with previous fi03 build....why would sammy and sprint remove that?!
Sent from my SPH-D710 using xda premium

manufan721 said:
Hmmm.....i flashed and it seemed laggy to me, modem worked great(still on it), huge downgrade from fi03 on dialer pad going back to three selection buttons up top compared to the 4 with previous fi03 build....why would sammy and sprint remove that?!
Sent from my SPH-D710 using xda premium
Click to expand...
Click to collapse
Fu#*! I didn't notice that yet. Haven't had a chance to use the rom yet. That blows. I don't know why they are mucking with it so much. I don't understand why they removed the mass storage option or the backup feature either. As far as it being laggy I am not noticing that part. Seems really smooth and fluid for me.

crawrj said:
Fu#*! I didn't notice that yet. Haven't had a chance to use the rom yet. That blows. I don't know why they are mucking with it so much. I don't understand why they removed the mass storage option or the backup feature either. As far as it being laggy I am not noticing that part. Seems really smooth and fluid for me.
Click to expand...
Click to collapse
Maybe it has something to do with the patent lawsuit, Idk...

Ok Let me try this question here
Has the led notification not flashing while charging bug been fixed?

someguyatx said:
Ok Let me try this question here
Has the led notification not flashing while charging bug been fixed?
Click to expand...
Click to collapse
I must have missed when it didn't work .. I have not tried this yet but running a FI03 build it comes on when charging

It seems that screen capture is NW. Is it still VOL DWN + PWR?

manufan721 said:
Hmmm.....i flashed and it seemed laggy to me, modem worked great(still on it), huge downgrade from fi03 on dialer pad going back to three selection buttons up top compared to the 4 with previous fi03 build....why would sammy and sprint remove that?!
Sent from my SPH-D710 using xda premium
Click to expand...
Click to collapse
Some things that I've noticed:
Agat's FI03 repack instead of FI25 kernel seemed to give me even better signal. Asked Tray to test as well but didn't work for him.
The buttons between contacts and dialer - which were nice - are gone again
Wonder if they're cutting down because the ROM was as big as it was...?
---------- Post added at 09:36 AM ---------- Previous post was at 09:34 AM ----------
yudancha said:
It seems that screen capture is NW. Is it still VOL DWN + PWR?
Click to expand...
Click to collapse
Still working...

This ROM gave me the power to have kids again!!!
Sent from my SPH-D710 using Tapatalk 2

sextape said:
This ROM gave me the power to have kids again!!!
Sent from my SPH-D710 using Tapatalk 2
Click to expand...
Click to collapse
wow this is the second best comment i ever came across here at XDA ;P
a few months back a good guy at fascinate forums responded like this when a fantastic ROM update came. He said
* Thanks OP, this thing got me laid last night , my GF just loved it *

Feedback
I don't mind installing stuff like this, especially if it fixes the issues im having, I can handle most of the tech hurdles, however I wish there was some kinda of feedback mechanism. Clearly 'they' aren't just writing the ROMs for fun....

Just some more stuff I've found.
- Out of Office editing works again!
- Battery monitor for devs is removed.
- Sprint Zone has a voice... Maybe I'm imagining this one but it wasn't in previous builds, right? Correct me if I'm wrong on this one.

this is irrelevant but is anyone having power button issues? mine is seriously messing up now.
Also, they better have not removed mass storage.

call recorder is not work at this leak

Dalek_Caan said:
I must have missed when it didn't work .. I have not tried this yet but running a FI03 build it comes on when charging
Click to expand...
Click to collapse
That is not the issue. The led notification light does not pulse while charging in Touchwiz ics builds. It worked in GB Touchwiz roms and it works in Aosp roms. You can use controls in aosp roms to make the light flash blue and red or the app blink or lightwave can make the light flash blue. Its very handy.

I'm running stock with Tunein Radio Pro & slacker radio installed.
Coming from FI03 I'm finding this build to be laggy at times with a couple freeze ups when opening apps- Market , Gmail & Working in settings which reminds me of the young ICS bad days.
Data transfer is slower.
Battery life not so good but that may change after settle in hmm heck I'm going back to FI03.

someguyatx said:
That is not the issue. The led notification light does not pulse while charging in Touchwiz ics builds. It worked in GB Touchwiz roms and it works in Aosp roms. You can use controls in aosp roms to make the light flash blue and red or the app blink or lightwave can make the light flash blue. Its very handy.
Click to expand...
Click to collapse
Ah I gotcha now ..sounds to me more like a feature that was removed in ICS not so much a bug to be fixed

In addition to the warning CJ posted, can we get a clear explanation about the stock kernel issue too please?
Here is an excerpt from Kobridge's forum by Leaderbuilder:
"Well flashed this and liking it so far but here are some things I've found. Stock kernel worked (works). But when I tried to Mobile Odin a source built kernel with recovery (Agat's 5.4 or RUjeluss' 1.8) the phone locke up on boot and required a battery pull.
To get it back to functioning I had to PC Odin the FI03 Agat's kernel (Couldn't use the FI25 one click from the repository it kept failing md5 check). Then I was able to boot back up.
Then tried to Mobile odin back to FI25 kernel via Mobile Odin and the same thing happened - stuck at boot screen. So back to PC Odin One-click and use FI03 Agats and booting again."