I've used Cyanogen Mod for quite a while without issue. Then, last week my camera started force closing. So far as I knowing didn't change any settings or install an app that would mess with it. Haven't updated radios, etc...it just stopped. I've cleared the cache in apps settings, there is space on the card.
Any suggestions? Thanks!
clear cache and dalvik from recovery, and reboot. If that doesnt work, you will probably have to reflash the rom.
sitlet said:
clear cache and dalvik from recovery, and reboot. If that doesnt work, you will probably have to reflash the rom.
Click to expand...
Click to collapse
Do I need to back anything up before doing this? Thanks.
Sent from my PC36100 using Tapatalk
polkadots said:
Do I need to back anything up before doing this? Thanks.
Sent from my PC36100 using Tapatalk
Click to expand...
Click to collapse
Shouldn't lose anything, as you are just clearing cache files. However, it can never hurt to do a backup first, only takes a couple minutes.
Ugh. I did a full wipe and upgraded to 7.1 (was on 7.0.2)...Camera is still FC'ing...again, it works with other apps (Vignette, Goggles) but not the stock camera. It worked just fine until two weeks ago...and then, nothing. No clue why. :/
Well, now it works...I did one more wipe and it just started working. Thanks!
Try fix permissions, worked for me
Sent from my PC36100 using xda premium
Related
Hello potential helpers in the CM community.
So long full days work or android updating story short, I was running 7.0.2.1 and updated to 7.0.3 with rom manager. I decided to not wipe all data, but to just clear the dalvik cache. After the update all the apps tried to reinstall again. I tried to do a titanium backup restore on top of that and everything froze up. I rebooted and tried again. Same thing happened. So i reverted to the nandroid 7.0.2.1 and did the entire thing over again but this time wiped the cache, and the same thing happened. So I wiped the data and cache, did a nandroid restore to the original 7.0.2.1 and then tried to do some different options. i changed up th order in which I did a restore, what cached I cleared, and anything I could think of. But Now I am stuck at either my nandroid 7.0.2.1 or 7.0.3. Both of these ROMs work fine with no issues EXCEPT whenever I try to install an app it fails. I have cleared the market app data and cache, but nothing seems to work. Any ideas?
Thanks
2 things.......
1. You should have posted this in the CM7 thread.
2. I would try reloading a fresh market .apk and see if that takes care of your issue. Usually just clearing cache and data will take care of those issues.
Sent from my CM7 Droid Incredible using XDA App
Also its good to make it a habit to flash ROMs in recovery after a cache and dalvik wipe instead of using RM
Sent from my CM7 Droid Incredible using XDA App
I will try that
Firstly, sorry have not been on XDA scene cm7 was out, didnt even check for that, and secondly I will try that. Thanks for the tips
justinmburrous said:
Firstly, sorry have not been on XDA scene cm7 was out, didnt even check for that, and secondly I will try that. Thanks for the tips
Click to expand...
Click to collapse
NP good luck, hopefully re-flashing market fixes your issues. You can find the .apk floating around XDA. Let me know if it work.
fixed
So I ended up just reverting back to the nandroid and then flashing 7.0.3 before I reflashed the market. However the market worked fine right after reflashed the new version of CM. I did not change anything from what I did in the past, but it is fixed. Thanks for your. help.
justinmburrous said:
So I ended up just reverting back to the nandroid and then flashing 7.0.3 before I reflashed the market. However the market worked fine right after reflashed the new version of CM. I did not change anything from what I did in the past, but it is fixed. Thanks for your. help.
Click to expand...
Click to collapse
Anytime. Glad everything is back to normal.
Not sure if it's just me or the phone. I'm currently running RCMix3d Runny v4.0, which I love, it's great. But I wanted to try AOSP to get a more natural feel. I installed CM7, had problems connecting to network and tons of FC's. Went back to RCMix3d, for a few days, then decided to try MIUI. Looks smooth, nice features. Tried to change some settings (turn on BT, turn on unknown sources install), phone did a Hot boot, once it came up I get constant android.process.acore FCs.
Both times installing AOSP roms I did a format data/cache/dalvik, not just installing over RCMix3d. Even tried doing format x2 on all first.
Anyone else having similar problems, or could it just be something I'm doing wrong?
Thanks
NYCBest said:
Not sure if it's just me or the phone. I'm currently running RCMix3d Runny v4.0, which I love, it's great. But I wanted to try AOSP to get a more natural feel. I installed CM7, had problems connecting to network and tons of FC's. Went back to RCMix3d, for a few days, then decided to try MIUI. Looks smooth, nice features. Tried to change some settings (turn on BT, turn on unknown sources install), phone did a Hot boot, once it came up I get constant android.process.acore FCs.
Both times installing AOSP roms I did a format data/cache/dalvik, not just installing over RCMix3d. Even tried doing format x2 on all first.
Anyone else having similar problems, or could it just be something I'm doing wrong?
Thanks
Click to expand...
Click to collapse
You may wanna format system as well.
Sent from my Incredible 2 HD using "Iced Frosting" Tapatalk
tylerlawhon said:
You may wanna format system as well.
Sent from my Incredible 2 HD using "Iced Frosting" Tapatalk
Click to expand...
Click to collapse
Sorry, what do you mean format system? I'm doing from CWM, wipe data/factory reset, wipe cache partition, wipe Dalvik Cache.
Unless you meet from the boot menu, doing a factory reset (which i'll need to reroot)
NYCBest said:
Sorry, what do you mean format system? I'm doing from CWM, wipe data/factory reset, wipe cache partition, wipe Dalvik Cache.
Unless you meet from the boot menu, doing a factory reset (which i'll need to reroot)
Click to expand...
Click to collapse
No, don't do that. In CWM, go to mounts and storage. You'll see format system, run that. Then wipe data/factory reset in the main CWM screen. Then install your AOSP ROM.
Sent from my Incredible 2 HD using XDA App
tylerlawhon said:
No, don't do that. In CWM, go to mounts and storage. You'll see format system, run that. Then wipe data/factory reset in the main CWM screen. Then install your AOSP ROM.
Sent from my Incredible 2 HD using XDA App
Click to expand...
Click to collapse
Ah right, I forgot that was under mounts. Thanks.
NYCBest said:
Ah right, I forgot that was under mounts. Thanks.
Click to expand...
Click to collapse
Lemme know if it works, and don't feel shy around the thanks button
Sent from my Incredible 2 HD using "Iced Frosting" Tapatalk
Well, I'm just an idiot. So I did the system format, still had same issues with MIUI.
Noticed that the issues start right after I restore from Titanium backup. Then realized I was hitting Restore System + Apps. Which going from Sense to AOSP, doesn't work so well.
Just reinstalled and only restored Apps. Working fine now.
Thanks for the help!
Sometimes the easiest things are the ones most overlooked!!! (been there done that.....way toooo many times..lol)
Glad ya got it going!
Some of my apps suddenly started to FC. I haven't changed anything, except switch from Franco to Trinity kernel. I'm on CNA 3.6.0.
I know at least about two of my apps that are problematic: iGag and PowerAmp. No matter how many times I reinstall them, they will just FC when I try to open them up. Clearing cache and dalvik-cache doesn't change anything.
Please help.
krneki10 said:
Some of my apps suddenly started to FC. I haven't changed anything, except switch from Franco to Trinity kernel. I'm on CNA 3.6.0.
I know at least about two of my apps that are problematic: iGag and PowerAmp. No matter how many times I reinstall them, they will just FC when I try to open them up. Clearing cache and dalvik-cache doesn't change anything.
Please help.
Click to expand...
Click to collapse
Try factory resetting, if fails then it could be a corruption, unstably or missing code from the new kernel you flashed.
Did the issue occurred when you flashed the kernel?
Sent from my Sony Tablet S using xda premium
I just tried to use Franco again, but no difference.
krneki10 said:
I just tried to use Franco again, but no difference.
Click to expand...
Click to collapse
Factory Reset?
What did you do before the force closes occur?
Sent from my Sony Tablet S using xda premium
krneki10 said:
Some of my apps suddenly started to FC. I haven't changed anything, except switch from Franco to Trinity kernel. I'm on CNA 3.6.0.
I know at least about two of my apps that are problematic: iGag and PowerAmp. No matter how many times I reinstall them, they will just FC when I try to open them up. Clearing cache and dalvik-cache doesn't change anything.
Please help.
Click to expand...
Click to collapse
I would also run a "fix permissions" in recovery. Solved the problem I was having on CNA as well. Wipe your cache, and dalvik, and see if that does it.
Re-flash in this order: cna, gapps, trinity kernel. At next reboot, boot to recovery & fix permissions. It's a ramdisk issue..
Before you wipe everything, try clean Dalvik cache first see if it helps
Sent from my Galaxy Nexus using xda premium
qtwrk said:
Before you wipe everything, try clean Dalvik cache first see if it helps
Sent from my Galaxy Nexus using xda premium
Click to expand...
Click to collapse
What I suggested above won't wipe anything and will fix it. Cleaning dalvik won't do anything.
Reflashing your ROM will indeed probably fix it.
addisontodd said:
I would also run a "fix permissions" in recovery. Solved the problem I was having on CNA as well. Wipe your cache, and dalvik, and see if that does it.
Click to expand...
Click to collapse
Wow, i can't believe i really forgot about Fix permissions XP
Sent from my Sony Tablet S using xda premium
Hey all, so I flashed the chemistry ROM and Goodness 8.0.3, which both have multi window. After I try to power on my phone after a full shut down, neither ROM seems to boot without me going into recovery and clearing both cache. Anyone else experience this or have a workaround?
Sent from my SPH-L710 using Tapatalk 2
Were they clean flashes?
Sent from my PG06100
CNexus said:
Were they clean flashes?
Sent from my PG06100
Click to expand...
Click to collapse
Yes, both done after a full wipe (minus internal SD card).
Sent from my SPH-L710 using Tapatalk 2
dante32278 said:
Hey all, so I flashed the chemistry ROM and Goodness 8.0, which both have multi window. After I try to power on my phone after a full shut down, neither ROM seems to boot without me going into recovery and clearing both cache. Anyone else experience this or have a workaround?
Sent from my SPH-L710 using Tapatalk 2
Click to expand...
Click to collapse
I just had the same issue I installed chemistry on my phone worked with no problems but on my moms phone i went into a bootloop after rebooting. I had to go into recovery do a factory reset wipe cache and dalvik cache and reflash the Rom all seems to be working now. Oh it was chemistry v5 btw.
Edit
Did you retore any system data with TB then hit fix permissions thats what was causing the problem for me.
Ghost8516 said:
I just had the same issue I installed chemistry on my phone worked with no problems but on my moms phone i went into a bootloop after rebooting. I had to go into recovery do a factory reset wipe cache and dalvik cache and reflash the Rom all seems to be working now. Oh it was chemistry v5 btw.
Edit
Did you retore any system data with TB then hit fix permissions thats what was causing the problem for me.
Click to expand...
Click to collapse
I did install non-system apps thru TB and installed latest Ktoonz kernel. Just not sure why either would result in a boot loop now.
Sent from my SPH-L710 using Tapatalk 2
Try flashing a different kernel, and try fixing permissions through rom manager, then reboot wipe cache and dalvik, make it run the optimizing apps thing.
Sent from my SPH-L710 using xda premium
Hey guys,
I recently moved to the gs3 and jelly bean so this may be a known solution but for the life of me I can't find it. I've tried liquid 2.1 and 2.2 both with multiple gapps and still have the problem on clean wipes. Phone itself is only a day old.
When I start my camera it lags for a minute showing no picture then crashes, saying gallery has stopped. The funny thing is it actually WORKED before I updated my google apps through play? Worked fine on original rom also. This is driving me nuts as it is literally my only problem and I need my camera, but love this rom.
Thanks!
EDIT: BTW. Gallery starts fine on its own and I've tried the camera32_patched_v2.zip fix I found on another site and no luck(just have two camera icons and both do same thing)
thegrog said:
Hey guys,
I recently moved to the gs3 and jelly bean so this may be a known solution but for the life of me I can't find it. I've tried liquid 2.1 and 2.2 both with multiple gapps and still have the problem on clean wipes. Phone itself is only a day old.
When I start my camera it lags for a minute showing no picture then crashes, saying gallery has stopped. The funny thing is it actually WORKED before I updated my google apps through play? Worked fine on original rom also. This is driving me nuts as it is literally my only problem and I need my camera, but love this rom.
Thanks!
EDIT: BTW. Gallery starts fine on its own and I've tried the camera32_patched_v2.zip fix I found on another site and no luck(just have two camera icons and both do same thing)
Click to expand...
Click to collapse
Clear data on the gallery app (settings/ manage applications, or something along those lines) go to all apps and find gallery, clear data on it and try to use the camera again..
SPRINT GS3 FAQ
flastnoles11 said:
Clear data on the gallery app (settings/ manage applications, or something along those lines) go to all apps and find gallery, clear data on it and try to use the camera again..
SPRINT GS3 FAQ
Click to expand...
Click to collapse
I've tried that. Still no luck.
thegrog said:
I've tried that. Still no luck.
Click to expand...
Click to collapse
Are you downloading your GAPPS from goo.im? If so, are they the 4.2.2 version?
Android Attack said:
Are you downloading your GAPPS from goo.im? If so, are they the 4.2.2 version?
Click to expand...
Click to collapse
Yes and yes. I've tried gapps-jb20121011 and 20130301, both on liquid 2.1 and 2.2. Clean wiped each time. Same thing with camera always. Grey screen when it starts and then shortly after opening it crashes with gallery error.
thegrog said:
Yes and yes. I've tried gapps-jb20121011 and 20130301, both on liquid 2.1 and 2.2. Clean wiped each time. Same thing with camera always. Grey screen when it starts and then shortly after opening it crashes with gallery error.
Click to expand...
Click to collapse
Did factory reset first from settings(not sure if you should do this from inside a rom but oh well) and then rebooted into recovery. Tried rewiping and reinstalling again... Cleared cache, divak. used liquid 2.2 and jb2012011 which goo.im says is correct, fixed permissions. Got constant com.google errors and couldn't run initial setup had to put 20130301 just to get to setup and have phone back running again. Camera still broke(this time I tried before any updates again and it didn't even work then). What am I doing wrong?
thegrog said:
Did factory reset first from settings(not sure if you should do this from inside a rom but oh well) and then rebooted into recovery. Tried rewiping and reinstalling again... Cleared cache, divak. used jb2012011 which goo.im says is correct, fixed permissions. Got constant com.google errors and couldn't run initial setup had to put 20130301 just to get to setup and have phone back running again. Camera still broke(this time I tried before any updates again and it didn't even work then). What am I doing wrong?
Click to expand...
Click to collapse
Not sure if this will help, but I suggest: Do factory reset from custom recovery, wipe cache and dalvik. Then, install the latest M Snapshot of CyanogenMod found here. Then flash the latest 4.2.2 GAPPS from here. Reboot into system, try out the camera and check if it works. If it works on CM, do factory reset, wipe cache and dalvik then install Liquid Smooth. Good luck!
Android Attack said:
Not sure if this will help, but I suggest: Do factory reset from custom recovery, wipe cache and dalvik. Then, install the latest M Snapshot of CyanogenMod found here. Then flash the latest 4.2.2 GAPPS from here. Reboot into system, try out the camera and check if it works. If it works on CM, do factory reset, wipe cache and dalvik then install Liquid Smooth. Good luck!
Click to expand...
Click to collapse
Update... I've been busy and have not had time to redo the phone again today, and I'm already 4 /0 folders deep(wtf 4.2?).
Here is the thing.. the camera started working out of the blue. I had the phone up for about 4-5 hours and randomly opened camera(which i keep doing) and it finally worked! I was able to take pics. Then my battery died... and now the camera is borked again after restarting. This is driving me insane. Any idea what is going on?
thegrog said:
Update... I've been busy and have not had time to redo the phone again today, and I'm already 4 /0 folders deep(wtf 4.2?).
Here is the thing.. the camera started working out of the blue. I had the phone up for about 4-5 hours and randomly opened camera(which i keep doing) and it finally worked! I was able to take pics. Then my battery died... and now the camera is borked again after restarting. This is driving me insane. Any idea what is going on?
Click to expand...
Click to collapse
Charged for a bit and was able to start camera on second try then it would not reopen no matter what I did. Restated a few times and everything. This is going to make me crazy lol.
thegrog said:
Update... I've been busy and have not had time to redo the phone again today, and I'm already 4 /0 folders deep(wtf 4.2?).
Here is the thing.. the camera started working out of the blue. I had the phone up for about 4-5 hours and randomly opened camera(which i keep doing) and it finally worked! I was able to take pics. Then my battery died... and now the camera is borked again after restarting. This is driving me insane. Any idea what is going on?
Click to expand...
Click to collapse
What I recommend doing is having phone charged to at least 70%, using Titanium Backup to restore your apps, and follow these instructions to the dot. This is what I did while using TWRP 2.5.
1) redownload LS v2.2 and gapps 20130301
2) backup all apps to TB
3) boot into TWRP
4) select 'Wipe' then 'Advanced Wipe'
5) wipe dalvik cache, system, data, cache
6) flash ROM then gapps
7) go back to 'Advanced Wipe' and wipe cache and dalvik cache again ONLY
8) reboot and run through setup wizard
9) immediately go into Play Store and cancel all installing apps.
10) install TB and restore user apps from there
11) reboot
now test out the camera
Sent from my SGH-T999 using xda premium
LuigiBull23 said:
What I recommend doing is having phone charged to at least 70%, using Titanium Backup to restore your apps, and follow these instructions to the dot. This is what I did while using TWRP 2.5.
1) redownload LS v2.2 and gapps 20130301
2) backup all apps to TB
3) boot into TWRP
4) select 'Wipe' then 'Advanced Wipe'
5) wipe dalvik cache, system, data, cache
6) flash ROM then gapps
7) go back to 'Advanced Wipe' and wipe cache and dalvik cache again ONLY
8) reboot and run through setup wizard
9) immediately go into Play Store and cancel all installing apps.
10) install TB and restore user apps from there
11) reboot
now test out the camera
Sent from my SGH-T999 using xda premium
Click to expand...
Click to collapse
Did exactly that.. except installed newest cm10.1 M instead of liquid just to test. Same issue. Camera seems to work randomly but most of the time get the gallery has stopped error. Wtf?
thegrog said:
Did exactly that.. except installed newest cm10.1 M instead of liquid just to test. Same issue. Camera seems to work randomly but most of the time get the gallery has stopped error. Wtf?
Click to expand...
Click to collapse
Is there a zip for the old camera to add it back? I just need a working camera don't care which it is.
Have you tried this one? The gallery seems to work. Maybe it will for you too
http://forum.xda-developers.com/showthread.php?t=1966426
Sent from my Nexus 4 using xda premium
---------- Post added at 08:29 PM ---------- Previous post was at 08:19 PM ----------
You can also try the Note 2 repacked camera
http://db.tt/i2BOv4Ax
Sent from my Nexus 4 using xda premium
Does it give you an error, or just close out, FC, any thing? Sounds like an issue that may need some other type of edits. Oh and update your recovery, that's why you have multiple /0 folders....
mt3g said:
Does it give you an error, or just close out, FC, any thing? Sounds like an issue that may need some other type of edits. Oh and update your recovery, that's why you have multiple /0 folders....
Click to expand...
Click to collapse
It force closes with gallery has stopped error
look through this and try it out http://forum.xda-developers.com/showthread.php?t=2102981&highlight=camera+connect
LuigiBull23 said:
Have you tried this one? The gallery seems to work. Maybe it will for you too
http://forum.xda-developers.com/showthread.php?t=1966426
Sent from my Nexus 4 using xda premium
---------- Post added at 08:29 PM ---------- Previous post was at 08:19 PM ----------
You can also try the Note 2 repacked camera
http://db.tt/i2BOv4Ax
Sent from my Nexus 4 using xda premium
Click to expand...
Click to collapse
Didn't work same issue
Tried some of the fixes from that thread too and nothing...
My question now is, I've seen someone saying turning on geotagging fixed the issue. I always turned it off when camera starts the first time, is there some way to turn it back on without redoing rom? Installing that other cam didn't even give me the option again and can't find it in settings.
Still can't get this camera working. Have not even been able to get it to work at all for 2 days now. Someone has to have an idea?
Solution - switch roms. You aren't stuck with roms. Try the aokp port. It's good. So is cm.
Sent from my SPH-L710 using xda app-developers app
WindroidApps said:
Solution - switch roms. You aren't stuck with roms. Try the aokp port. It's good. So is cm.
Sent from my SPH-L710 using xda app-developers app
Click to expand...
Click to collapse
I HAVE switched to cm, I'm running it right now. Same exact issue. Works once in a blue moon but usually gallery has stopped and force close of camera. Worked on stock, this is a brand new replacement I got last week.