Related
Little utility for waking up / shutting down / rebooting or Logging off from the PC's on your network via you wm device.
Requirements;
# Wifi active on wm and connected on same local network as PC's
# Wake-On-Lan enabled on PC's
# allow http traffic on Port 7777
# obtain MAC Address for all PC's you wish to 'control'
# Multi form factor - check CAB name for correct version for your device
1. Install cab on device
2. Install the service via the msi installer on any PC's you wish to 'control'
3. Edit the WakeAndShakeConfig.xml on the device OR use the settings screen from within the app - enter your PC's IP addresses (or host name) and their corresponding MAC addresses.
09/02/2010 - Settings screen added (still needs some tweaking, a few navigation bugs)
Any Q's shout.
If you find this useful & wish to donate please see my sig button.
-=-=-
20/03 - update service installer
VGA Version?
Is there any chance for VGA version?
various form factors added, see #1
cheers,
dan
man I've been dying for something like this for a while... eagerly awaiting a QVGA version
Wish someone can make a Video Tutorial
on how to set this & post on youtube
Please
pndragon said:
man I've been dying for something like this for a while... eagerly awaiting a QVGA version
Click to expand...
Click to collapse
will try and do one later today ;-)
Thanks for sharing
added QVGA cab - see post #1
updated the PC service - if user cancels shutdown subsequent shutdown requests will now be triggered
Hi dt_matthews,
it will be very amazing was it possible to skin it for DUSK.
I have seen the screenshot and i was thinking is this something what be possible in a future version?
added IP address to settings xml and config, this is required if your PPC doesnt have regsitry entries mimicking hosts file lookup, ip address will be shown in the machine drop-down list along with the machine name
added IP address to xml and to settings screen - this is required for PPC's that dont have registry entries which mimic hosts file lookups, these IP's are displayed in the machine dropdown along with the machine name
Been waiting for an app like this
To bad I can't get the settings screen to work, it won't save the data I type in to the host, ip and mac fields.
And the xml file is clean except from the settings tag so I don't know how to modify the parameters
Please help...
HTML:
<settings><machine name="machineName1" mac="071EB93CAD68" ip="192.168.1.87"/><machine name="machineName2" mac="0219DDAFC6B3" ip="192.168.1.85"/><machine name="machineName3" mac="001A437AA515" ip="192.168.1.65"/></settings>
This is a sample of a valid version of the xnml config. Just obviously change the name tags, the mac and the IP addresses to match your machines. then run the service installer on your machines and the cab on your device and you should be fine.
shout if its not clear
cheers,
dan
Thanx! Works a lot better when one knows the param names
Next problem
Can't get the HTTP Shutdown to run properly on the PC. It starts automatic but then stopps as it has no work to do (according to windows)
Suggestions?
240z said:
Thanx! Works a lot better when one knows the param names
Next problem
Can't get the HTTP Shutdown to run properly on the PC. It starts automatic but then stopps as it has no work to do (according to windows)
Suggestions?
Click to expand...
Click to collapse
that is as designed, its an http listener which wont be show as actively 'doing' anything by svchost.exe [service manager]. as long as you are connected to the same network (and workgroup) it should be ok. let me know
i've tried this on two machines now. on one of them it won't work at all. on the other i got it to reboot ones. but know it doesn't work anymore.
on both machines windows reports application error on shutdownpcservice.exe and wants to send an error report to microsoft.
in the application log (under computer managment) i used to see how the shutdownservice started to listen to port 7777, but not anymore. it's like it not running.
i've tried to reinstall the program but that didn't do it.
thanks for your effort Dan
240z said:
i've tried this on two machines now. on one of them it won't work at all. on the other i got it to reboot ones. but know it doesn't work anymore.
on both machines windows reports application error on shutdownpcservice.exe and wants to send an error report to microsoft.
in the application log (under computer managment) i used to see how the shutdownservice started to listen to port 7777, but not anymore. it's like it not running.
i've tried to reinstall the program but that didn't do it.
thanks for your effort Dan
Click to expand...
Click to collapse
hey dude,
i've updated the service installer (see post #1) - uninstall the last version (make sure the service is uninstalled fully, you may need to uninstall it from the cmd line if it wont uninstall via the GUI) then install the new version, that is the version i am running without problems, let me know how you get on, happy to help with any tweaking ;-)
Can this be used to put the PC to sleep (into standby) rather than shutdown? If not, could this feature be added?
Windows cmd line doesnt support sleep, but there is an alternative i could use (i think), but i cant do it straight away since my pc with the code on has just given up the ghost and it'll be a bit of time till i can get the data off it, but let me know if you can wait and i'll do it as soona s i can.
cheers,
dan
[App] DNetworkTools (WorkInProgress Release) v0.1.73 (04 Jul, 2010)
Description:
Various IP address related tools for Network Engineers. Very handy!!
Purpose:
I did not find such good tool with finger friendly interface, so thought to put together all my old windows application code in to a good interface.
Luckily found SenseSDK by Edward, worked out great, tooks me few hours to put this application. Still it is work in progress and released for testing.
All the features do work without issues.
UI Credits:
SenseSDK by Edward Boelzner (eboelzner)
Can't find source from where i got icon which i used for application
Features:
General​
Finger Friendly
Easy Interface
Open Source (Will be hosted on CodePlex)
Works on most Windows Phones
Tools​
IPv4 Conversions
IPv4 Addresses
IPv4 Subnet Calculator
IPv4 CIDR Calculator
IPv4 Wildcard Mask Calculator
IPv4 Ping Tool (little buggy)
Future Features:
Few UI Bug Fixes
Save last used IP
Export details to file
Export IP ranges
IPv6 Tools
Members can request more features
Requirements:
.Net Compact Framework 3.5
Screenshots:
Screenshots are attached
Download:
Cab file is attached
Please report bugs and feedbacks.
Version History
v0.1.73 (04 Jul, 2010)
+ First work in progress release with basic features.
Reserved-2
Reserved-3
looks interesting. will try in the morning. thanks
good application ... easy for me to conversion ip class subnet
core7x said:
good application ... easy for me to conversion ip class subnet
Click to expand...
Click to collapse
Do let me know if it works ok on your device. just need feedback, will help me to improve or enhance.
Thanks.
Maria and Josef (holy sh...t ), this is what i need for a longer time. Please hold up the good work. Special thank you for sharing this very helpfull app.
- ping tool = amazing
- ip4 conversion = working perfect
- addresses = working
- subnet calculator = all 3 are working
- cidr calculator = perfect working
- wildcard mask calculator = working perfect
- settings -> about = not working
mike2nl said:
Maria and Josef (holy sh...t ), this is what i need for a longer time. Please hold up the good work. Special thank you for sharing this very helpfull app.
- ping tool = amazing
- ip4 conversion = working perfect
- addresses = working
- subnet calculator = all 3 are working
- cidr calculator = perfect working
- wildcard mask calculator = working perfect
- settings -> about = not working
Click to expand...
Click to collapse
Thanks for feedback..
i will release next version in next few days. will be fixing few bugs i found in cidr calc which crashes when changed the mask., about screen is not coded yet, less important. .
If you have any request then do let me know.
working good, maybe need to have some ipv6 stuff
because next gen ip will be ipv6
im suggest
ipv6 ip class / unicast / multicast
ipv6 subnet calculator
maybe in the future also, mobile phone will have ipv6 tunnel client !!
so that , we can use ipv6 mobile number portability
will love it
thanks
put some network scanner, port scanner and wireless radar make it a network auditing tool like retina and netstumbler
that would be awesome!
i wish i could help in "technical" way
core7x said:
working good, maybe need to have some ipv6 stuff
because next gen ip will be ipv6
im suggest
ipv6 ip class / unicast / multicast
ipv6 subnet calculator
maybe in the future also, mobile phone will have ipv6 tunnel client !!
so that , we can use ipv6 mobile number portability
will love it
thanks
Click to expand...
Click to collapse
Thanks, IPv6 already under development, but will be ready till next few releases and when IPv4 gets stable. but surely IPv6 will be part of it, i myself need it too.
randolph2000 said:
put some network scanner, port scanner and wireless radar make it a network auditing tool like retina and netstumbler
that would be awesome!
i wish i could help in "technical" way
Click to expand...
Click to collapse
Port scanner will be part of it, but not yet developed but will be done.
Cant say about rest at this point.
Thanks.
Ping Not Working Properly
Ping only works fine for the first time. It requires application restart to make it work. I'm using HTC HD2.
Suggestion: More network commands such as TRACERT, TELNET etc.
moon1978 said:
Ping only works fine for the first time. It requires application restart to make it work. I'm using HTC HD2.
Suggestion: More network commands such as TRACERT, TELNET etc.
Click to expand...
Click to collapse
That was the bug in Ping which was identified, and will be fixed, already resolved in development, should patch it in next release.
Tracert/telnet good idea.
will try to include them in my todolist.
thanks.
great tool,
could have used such a useful tool during my aprenticeship.
settings --> exit is not working on my hd2
Sweet will try it soon my device won't install cab now.will look into it
Tried it, loved it. I always have problems calculating Class B IPs and I was hoping for one for my HD2 when I saw an Android version. I think it'll be better if there's support for IPv6 as well. Also, I used it for a while and found out the tool lagged about 1 to 2 second when switching to another menu, I'm still okay with that though.
bdeath said:
great tool,
could have used such a useful tool during my aprenticeship.
settings --> exit is not working on my hd2
Click to expand...
Click to collapse
Exit issue fixed already. thanks for informing.
bloodychaos said:
Tried it, loved it. I always have problems calculating Class B IPs and I was hoping for one for my HD2 when I saw an Android version. I think it'll be better if there's support for IPv6 as well. Also, I used it for a while and found out the tool lagged about 1 to 2 second when switching to another menu, I'm still okay with that though.
Click to expand...
Click to collapse
Yes there is a big lag sometimes but not always, will try to take a look in deep and fix/optimize it.
thanks.
Guys, I found the way to mess with the GPS settings, exactly the way we do in Bada 1.2!
//Note that the following works in Bada 2.0.1 XPKH3, and I don't guarantee that it will DEFINATELY work in the future Bada 2.0.1 betas, or final.\\
1) Enter keypad and dial *#7092463*# --> this gives you access to "Internals" menu.
-- In this menu, you can edit and test a lot of things, but always use with caution and LOGIC Also, you may want to save this code without the last "#" as a favorite contact, then load the code on the dial screen and thus entering the Internals menu without having to type it from scratch every time
2) Go to "4-Module Setting"-->"4-COMM"-->"2-Lbs"
3) Here, options:
1 Tracking Test--> This is the classic GPS signal lock test.
2 TTFF Test--> "Time To First Fix Test"- a sub-test aimed at responsiveness.
3 H/W Test--> NOT GPS signal locking test. Sensitivity & CNO test here only.
4 Settings--> (See below)
5 Delete GPS Data--> (you know what this is for, don't you?)
6 Debug Tools--> (maybe devs have interest in this)
:4 Settings options:
1 General Settings--> similar to "Application settings" in Bada 1.2, here you can actually mess with settings anyway you want.
GPS+ AutoDownload: when enabled uses your packet data or WiFi for updating the satellite files
Accuracy: by default 1000, I haven't yet tested whether a smaller value (ie. 500) produces better results.
Cold Start: I don't know what this is, maybe (IMO) it makes the GPS try to lock without using the sat files.
2 SUPL Setting--> I couldn't get into this option. Here normally would be the server that the a-GPS function downloads the sat files from.
3 H/W Setting--> I wouldn't mess with numbers here. It has something to do with tests though.
4 Set to Defatult [it means default ]--> (i guess you know this one)
5 Assist Method--> only change the method here in case someone creates a guide and commands you to do so. Normally you don't need to change this.
6 Network Profile--> You can't change from here, but that's OK, this setting can be controlled from Main Menu-->"Settings"-->"Network"-->"Application profiles"-->"Location"/"Navigation"
7 Etc Setting--> If you don't know what to do here, don't change anything.
Hope you have fun messing with the settings! Feel free to share any new discoveries, and by all means, maybe a set of settings that you find better than the default ones!
stathismes::
Know about that im waiting for Bada 2 thank you !!!
Cold start and Auto Download maybe nice thing for now if you want more change you need before set Assit mod on AGPS then you see more setting you can change like server adress...When yous changed it you reback to GPS+ mode
General Set : A-GPS UP BASED
Suupl SET :google server on server custom and google ip... port its same
You can grap GPS like maxi 40sec
change Adress
to
supl.google.com
and the port to 7262
reboot phone and then reply to GPS+ and reboot once again
For a detailed information on the GPS Settings above, you can refer to this thread: http://www.badaturkiye.com/showthread.php/bada-2-0-2690.html?
stathismes said:
Guys, I found the way to mess with the GPS settings, exactly the way we do in Bada 1.2!
//Note that the following works in Bada 2.0.1 XPKH3, and I don't guarantee that it will DEFINATELY work in the future Bada 2.0.1 betas, or final.\\
stathismes::
Click to expand...
Click to collapse
Another way to access the gps menu is by dialing *#3214789650#
BTW - IMHO the GPS works a treat in PKH2 but not in PKH3
http://forum.xda-developers.com/showpost.php?p=17005437&postcount=104
It appears that setting the port to 7262 doesn't work in PKH3 either :-(
Hmm... Tigrouzen, your gps mode is interesting... Standalone doesn't work for me... Neither does MS Based... I'll try UP Based...
I think that SFR have better location support than Bouygues... I'll post here after testing.
Update: nope... UP Based makes no difference to me. :-( it's non assisted GPS every time for me... PKH3 = borked A-GPS
Tigrouzen said:
change Adress
to
supl.google.com
and the port to 7262
reboot phone and then reply to GPS+ and reboot once again
Click to expand...
Click to collapse
What i must do to enter the supl Settings
edit
O sorry I don't read this: Cold start and Auto Download maybe nice thing for now if you want more change you need before set Assit mod on AGPS then you see more setting you can change like server adress...When yous changed it you reback to GPS+ mode
Hii Guys,,
am based in uae and the viper is blocked, am looking for a free vpn application that best suit the S3, any suggestion please? i need it badly.....
There is a VPN client built into the phone check if it works for you
Sent from my GT-I9300 using xda app-developers app
Yes, but adding a VPN client forces additional security even when the VPN is not activated. I hate to key in a passcode every time I want to wake up my phone.. is there a play store alternative?
vinumsv said:
There is a VPN client built into the phone check if it works for you
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
thanks for the reply, but i need the vpn setting, as the name, type and server address, from where i can get them?
BR,,
monestarazi said:
thanks for the reply, but i need the vpn setting, as the name, type and server address, from where i can get them?
BR,,
Click to expand...
Click to collapse
There are differencies between VPN app and VPN server.
What you're asking there is a VPN server, not a VPN app.
There are plenty of free VPN on the web, but they're, most of the tine, unsecured and bandwidth limited. Not a good idea in fact.
But, I don't have understand yet why would you want to use VPN. If a website is locked in your country, the most efficiency solution will be using a proxy. But if some udp/tcp are not available or restricted, there, the VPN could be usefull.
- VPN = creating a secure connexion between a point A and B using a dedicated udp/tcp port.
- Proxy = sending a tcp/udp request to a remote server, the server will do it for you and send the result back to you.
Please, be more accurate in what you're searching for
Hi,
I need something as the hot spotshield app, it can give u the privillage to use viper. I had before iphone, and it was working through it.
Regards..
Sent from my GT-I9300 using xda app-developers app
If u looking for paid then use purevpn or express vpn. I've used both and I'll recommend u go for purevpn its fast and they have an app as well.
Sent from my GT-I9300 using xda premium
Droidvpn is the best till now
100mb free per day
the only catch that u have 2 root ur phone
am using it in muscat oman
it works with me like a charm : )
excuse may english
Anyone having succes using OpenVPN from S3 to a Synology box?
If so... A tutorial would be nice..
Sent from my GT-I9300 using xda premium
monestarazi said:
Hi,
I need something as the hot spotshield app, it can give u the privillage to use viper. I had before iphone, and it was working through it.
Click to expand...
Click to collapse
*
HS shield is itself a VPN, add a VPN inside another is a bas idea, at least if I understand what you said.
The devs have made a android version (here) but only for 2.0+ and is not available for ICS.
A way do it without an app could be to retrieve VPN settings from inside HS shield if you're using it on your computer.
drkaosdk said:
Anyone having succes using OpenVPN from S3 to a Synology box?
Click to expand...
Click to collapse
Before trying to make OpenVPN work properly, do you have a fixed ip adress or a dynamic one ?
If you don't know, check your public adress before and after turning off/on your modem.
If you have a fixed one, just use your ip as VPN adress, set the port to 443 (for SSL encryption) and use the login you set in OpenVPN settings.
If you have a dynamic ip, you must use a dynamic DNS, such as DynDNS. This way you'll have an url adress (ex. hellow95.dyndns-server.com) that will always point to your ip.
There are many detailed tutorials on the web for this.
I'm a DynDNS client for about two years and I never been disapointed (I'm using it to link my dynamic ip that I can access my NAS everywhere), so you can go ahead without regrets.
Hellow95 said:
*
HS shield is itself a VPN, add a VPN inside another is a bas idea, at least if I understand what you said.
The devs have made a android version (here) but only for 2.0+ and is not available for ICS.
A way do it without an app could be to retrieve VPN settings from inside HS shield if you're using it on your computer.
Before trying to make OpenVPN work properly, do you have a fixed ip adress or a dynamic one ?
If you don't know, check your public adress before and after turning off/on your modem.
If you have a fixed one, just use your ip as VPN adress, set the port to 443 (for SSL encryption) and use the login you set in OpenVPN settings.
If you have a dynamic ip, you must use a dynamic DNS, such as DynDNS. This way you'll have an url adress (ex. hellow95.dyndns-server.com) that will always point to your ip.
There are many detailed tutorials on the web for this.
I'm a DynDNS client for about two years and I never been disapointed (I'm using it to link my dynamic ip that I can access my NAS everywhere), so you can go ahead without regrets.
Click to expand...
Click to collapse
Thanks mate.. Fixed ip
.. OpenVPN is a little different to setup than pptp vpn... Did you succeed with OpenVPN thru android to a Synology box? Tutorial for that? Maybe?
Sent from my GT-I9300 using xda premium
PPTP VPN is too unsecure by the way, try to stay away from this crap
Well, I've set mine a long time ago on my Debian (yes, I use a home-made NAS).
First, you have to install OpenVPN if you don't did yet.
If not ->
connect to your server via SSH and :
> ipkg update
> ipkg install openvpn
Click to expand...
Click to collapse
Then we create the init script vi /opt/etc/init.d/S20openvpn
#!/bin/sh
#
# Startup script for openvpn server
#
# Make sure IP forwarding is enabled
echo 1 > /proc/sys/net/ipv4/ip_forward
# Make device if not present (not devfs)
if ( [ ! -c /dev/net/tun ] ) then
# Make /dev/net directory if needed
if ( [ ! -d /dev/net ] ) then
mkdir -m 755 /dev/net
fi
mknod /dev/net/tun c 10 200
fi
# Make sure the tunnel driver is loaded
if ( !(lsmod | grep -q "^tun") ); then
insmod /lib/modules/tun.ko
fi
# If you want a standalone server (not xinetd), then comment out the return statement below
return 0
## This is for standalone servers only!!!!
# Kill old server if still there
if [ -n "`/opt/bin/pidof openvpn`" ]; then
/opt/bin/killall openvpn 2>/dev/null
fi
# Start the openvpn daemon - add as many daemons as you want
#/opt/sbin/openvpn --daemon --cd /opt/etc/openvpn --config openvpn.conf
/opt/sbin/openvpn --cd /opt/etc/openvpn --daemon --log-append /var/log/openvpn.log --config /opt/etc/openvpn/config/server.ovpn
# [EOF]
Click to expand...
Click to collapse
Now let's check if the module is loaded
> insmod /lib/modules/tun.ko
>dmesg | grep tun
Click to expand...
Click to collapse
By now OpenVPN should be good to go.
But before, we need to create en encryption key, you can follow the tuts here (it comes from Debian Wiki)
Then once your VPN server is set, just type the infos into Android and enjoy.
I use OpenVPN to manage throught SSH my NAS and access my Transmission server
P.S: the tuts is not from me, I pick it up from a french community nammed MyHost. But if you got some problems with it, don't hesitate to pm me.
Tutorial for OpenVPN using Galaxy Siii to a Synology Box...
Hellow95 said:
*
HS shield is itself a VPN, add a VPN inside another is a bas idea, at least if I understand what you said.
The devs have made a android version (here) but only for 2.0+ and is not available for ICS.
A way do it without an app could be to retrieve VPN settings from inside HS shield if you're using it on your computer.
Before trying to make OpenVPN work properly, do you have a fixed ip adress or a dynamic one ?
If you don't know, check your public adress before and after turning off/on your modem.
If you have a fixed one, just use your ip as VPN adress, set the port to 443 (for SSL encryption) and use the login you set in OpenVPN settings.
If you have a dynamic ip, you must use a dynamic DNS, such as DynDNS. This way you'll have an url adress (ex. hellow95.dyndns-server.com) that will always point to your ip.
There are many detailed tutorials on the web for this.
I'm a DynDNS client for about two years and I never been disapointed (I'm using it to link my dynamic ip that I can access my NAS everywhere), so you can go ahead without regrets.
Click to expand...
Click to collapse
Hi ..
Thanks for replying to this..
I have a fixed ip-adress ... I would really like if someone here can guide thru a setup/tutorial to get OpenVPN work using the OpenVPN software from : Arne Schwabe .. in android Market.. I have a Galaxy Siii and i want it to connect to the Synology Box with OpenVPN software enabled...
Anyone that can guide me thru that proces would be great.. ;-)
drkaosdk said:
Hi ..
Thanks for replying to this..
I have a fixed ip-adress ... I would really like if someone here can guide thru a setup/tutorial to get OpenVPN work using the OpenVPN software from : Arne Schwabe .. in android Market.. I have a Galaxy Siii and i want it to connect to the Synology Box with OpenVPN software enabled...
Anyone that can guide me thru that proces would be great.. ;-)
Click to expand...
Click to collapse
Got it working.. Pretty simple after all
Sent from my GT-I9300 using xda premium
hi,
Are you sure that Droidvpn ll work in Oman. Am also from Oman n would like to use viber all the time but its blocked!!. Ru sure boss ??
m4ever007 said:
Droidvpn is the best till now
100mb free per day
the only catch that u have 2 root ur phone
am using it in muscat oman
it works with me like a charm : )
excuse may english
Click to expand...
Click to collapse
What do u mean by rooting the device?
Sent from my GT-I9300 using xda app-developers app
Orbit is the best vpn hands down...it works great and is free!!!!!
Sent from my ASUS Transformer Pad TF300T using xda app-developers app
mickey878 said:
Orbit is the best vpn hands down...it works great and is free!!!!!
Sent from my ASUS Transformer Pad TF300T using xda app-developers app
Click to expand...
Click to collapse
Is this a vpn client?
Sent from my GT-I9300 using Tapatalk 2
Vpnc widget is usually very good if you're rooted.
Sent from my GT-I9300 using Tapatalk 2
am 100% sure
am using it right now
its the best one for daily use
auto reconecet when network change is the best option u can find
its not a pptp vpn
its more and more than that
the only issue is that u have to root ur phone
thats v easy
just go orgnl dvlp thread and find CF root 6.4 and just follow the instruction
i hope this is wt u are looking for
by the way viber is not blocked in oman any more
its officale unblocked by nawras and omantell
have fun man
Sent from my GT-I9300 using xda app-developers app
I'm currently (trying) to make a app that simply displays a webpage.. However, I want to be able in the settings for the user to select the URL & port.. But finding it hard to do!
Basically, If the user presses the options button all I need is a box with two options..
IP:
Port:
So it'll look something like:
IP Address:
[ INPUT BOX HERE FOR IP ADDRESS (@IP_ID) ]
Port Number:
[ INPUT BOX HERE FOR Port ID (@Port_ID) ]
Then within the code for the webview..
The code is:
Code:
webView = (WebView) findViewById(R.id.webView1);
startWebView([COLOR="red"]MY DEFAULT URL[/COLOR]);
All I basically need to do is change the IP & Port to what the user puts into the settings.. So..
Code:
startWebView([COLOR="red"]@IP_ID[/COLOR] : [COLOR="red"]@Port_ID[/COLOR])
I'm pretty new to making app's but have previously done PHP, C++ & MySQL ect.. But this has just thrown me off a little..
I've asked a couple of other places but they just direct my to the android dev page which throws me off even more