Related
Little utility for waking up / shutting down / rebooting or Logging off from the PC's on your network via you wm device.
Requirements;
# Wifi active on wm and connected on same local network as PC's
# Wake-On-Lan enabled on PC's
# allow http traffic on Port 7777
# obtain MAC Address for all PC's you wish to 'control'
# Multi form factor - check CAB name for correct version for your device
1. Install cab on device
2. Install the service via the msi installer on any PC's you wish to 'control'
3. Edit the WakeAndShakeConfig.xml on the device OR use the settings screen from within the app - enter your PC's IP addresses (or host name) and their corresponding MAC addresses.
09/02/2010 - Settings screen added (still needs some tweaking, a few navigation bugs)
Any Q's shout.
If you find this useful & wish to donate please see my sig button.
-=-=-
20/03 - update service installer
VGA Version?
Is there any chance for VGA version?
various form factors added, see #1
cheers,
dan
man I've been dying for something like this for a while... eagerly awaiting a QVGA version
Wish someone can make a Video Tutorial
on how to set this & post on youtube
Please
pndragon said:
man I've been dying for something like this for a while... eagerly awaiting a QVGA version
Click to expand...
Click to collapse
will try and do one later today ;-)
Thanks for sharing
added QVGA cab - see post #1
updated the PC service - if user cancels shutdown subsequent shutdown requests will now be triggered
Hi dt_matthews,
it will be very amazing was it possible to skin it for DUSK.
I have seen the screenshot and i was thinking is this something what be possible in a future version?
added IP address to settings xml and config, this is required if your PPC doesnt have regsitry entries mimicking hosts file lookup, ip address will be shown in the machine drop-down list along with the machine name
added IP address to xml and to settings screen - this is required for PPC's that dont have registry entries which mimic hosts file lookups, these IP's are displayed in the machine dropdown along with the machine name
Been waiting for an app like this
To bad I can't get the settings screen to work, it won't save the data I type in to the host, ip and mac fields.
And the xml file is clean except from the settings tag so I don't know how to modify the parameters
Please help...
HTML:
<settings><machine name="machineName1" mac="071EB93CAD68" ip="192.168.1.87"/><machine name="machineName2" mac="0219DDAFC6B3" ip="192.168.1.85"/><machine name="machineName3" mac="001A437AA515" ip="192.168.1.65"/></settings>
This is a sample of a valid version of the xnml config. Just obviously change the name tags, the mac and the IP addresses to match your machines. then run the service installer on your machines and the cab on your device and you should be fine.
shout if its not clear
cheers,
dan
Thanx! Works a lot better when one knows the param names
Next problem
Can't get the HTTP Shutdown to run properly on the PC. It starts automatic but then stopps as it has no work to do (according to windows)
Suggestions?
240z said:
Thanx! Works a lot better when one knows the param names
Next problem
Can't get the HTTP Shutdown to run properly on the PC. It starts automatic but then stopps as it has no work to do (according to windows)
Suggestions?
Click to expand...
Click to collapse
that is as designed, its an http listener which wont be show as actively 'doing' anything by svchost.exe [service manager]. as long as you are connected to the same network (and workgroup) it should be ok. let me know
i've tried this on two machines now. on one of them it won't work at all. on the other i got it to reboot ones. but know it doesn't work anymore.
on both machines windows reports application error on shutdownpcservice.exe and wants to send an error report to microsoft.
in the application log (under computer managment) i used to see how the shutdownservice started to listen to port 7777, but not anymore. it's like it not running.
i've tried to reinstall the program but that didn't do it.
thanks for your effort Dan
240z said:
i've tried this on two machines now. on one of them it won't work at all. on the other i got it to reboot ones. but know it doesn't work anymore.
on both machines windows reports application error on shutdownpcservice.exe and wants to send an error report to microsoft.
in the application log (under computer managment) i used to see how the shutdownservice started to listen to port 7777, but not anymore. it's like it not running.
i've tried to reinstall the program but that didn't do it.
thanks for your effort Dan
Click to expand...
Click to collapse
hey dude,
i've updated the service installer (see post #1) - uninstall the last version (make sure the service is uninstalled fully, you may need to uninstall it from the cmd line if it wont uninstall via the GUI) then install the new version, that is the version i am running without problems, let me know how you get on, happy to help with any tweaking ;-)
Can this be used to put the PC to sleep (into standby) rather than shutdown? If not, could this feature be added?
Windows cmd line doesnt support sleep, but there is an alternative i could use (i think), but i cant do it straight away since my pc with the code on has just given up the ghost and it'll be a bit of time till i can get the data off it, but let me know if you can wait and i'll do it as soona s i can.
cheers,
dan
First off this would not be possible without the work of many devs in many places. Some of the builds that have really helped get this done:
The base build I started with:
[Android] Eclair 2.1 by mssmison
Builds/Devs that helped me get this far:
polymod 2.1 alpha 4 by polyrhythmic that is itself is based on openeclair 1.1.5
dzo, wesgarner, ctso, many more who have contributed to openeclair
Please try both of these and My build and post your results, I want to know what works and what doesn't. It also will help to know what works better on whose build.
Here it is folks Android running from NAND on your kaiser/tilt!
What works:
WIFI - you no longer need a calibration file from Windows Mobile.
GPS
Phone
Sleep
Battery - See here: http://forum.xda-developers.com/showpost.php?p=5695425&postcount=126
What doesn't:
Bluetooth? I have random results still
Camera
Youtube
Jbed - read thread for working install and instructions
I am in no way liable for whatever may happen to you or your phone!
This will erase/replace windows mobile.
How to get it:
Step one:
If you do not have the latest nbh get dzo's from here:
http://it029000.massey.ac.nz/vogue/files/?C=M;O=D
or vilord's
http://sourceforge.net/projects/androidhtc/files/
and flash it to your phone.
Step two:
Perform a hard reset on the phone, then remove the battery.
Step three:
Download my package and place the androidinstall.tar in the andboot folder on the root of your sd card.
Old link for reference only -Version 1.0
Old link for reference only -Version 1.1 Update Patch
Pre-Patched Version 1.1
Place your sd card in your phone put the battery back in and power it on.
Watch the screen and once it tells you to press and hold the D-Pad center button (do it fast!).
Choose the install option and answer "Yes" when it asks to clear your data.
Step four:
Choose quit and wait for the big green android!
If you get a second google account setup screen after entering your info once just hit the home button or reboot.
*notes*
Starting wifi during the initial setup works but the setup app FC's and goes back to the start wifi screen. The wifi actually does start but you cannot choose a network until you complete setup.
You must have a sd card to boot (not with vilord's kernel)
LCD density is set to 160 as I believe with a 320x480 nbh yields the best usability and market selection.
I the screen flips the wrong way instead of going back to portrait mode open "spare parts" and uncheck "launcher rotation"
(you can also go to Settings "Sound and Display" and uncheck Orientation")
(Works on polaris and vogue as well)
To report, view, and track bugs with KaiserDroid just go to http://bugs.homecncfun.com . You can either Signup for an Account (preferred) or Login Anonymously
If you like my work consider donating to my Gadget Fund:
DONATE
Typo in your link, looks like it's missing the "h" at the beginning (thanks to your sig for the clue haha). I'm downloading it now, going to try it out and report back with the results.
aqtrans said:
Typo in your link, looks like it's missing the "h" at the beginning (thanks to your sig for the clue haha). I'm downloading it now, going to try it out and report back with the results.
Click to expand...
Click to collapse
Thanks got it fixed, let me know how it goes.
Just got it setup, some things I've noticed so far:
Setup Wizard got stuck in an infinite loop right after setting up my Google Account. It signed me in, started syncing just fine, but the next screen asked me to setup a Google Account again. Signing in led me to another Google Account setup page. A reboot fixes this though.
Might want to note that your build.prop has the lcd.density set to 160, most NAND builds I've ran have had it set to 120 or 113 or had a choice.
So far it's been a lot faster than other Eclair builds I've tried! Awesome work!
aqtrans said:
Just got it setup, some things I've noticed so far:
Setup Wizard got stuck in an infinite loop right after setting up my Google Account. It signed me in, started syncing just fine, but the next screen asked me to setup a Google Account again. Signing in led me to another Google Account setup page. A reboot fixes this though.
Might want to note that your build.prop has the lcd.density set to 160, most NAND builds I've ran have had it set to 120 or 113 or had a choice.
So far it's been a lot faster than other Eclair builds I've tried! Awesome work!
Click to expand...
Click to collapse
Thanks for the feedback, I'll add some more notes to the 1st post.
I don't normally have a sim in until after I get it setup and tested so I just skip the initial setup so i must have missed that.
How does the speed of this build compare to polyrhythmic's? I tried that and unfortunately it was unbearably slow even off NAND. I guess it's back to WinMo for a little while
chambo622 said:
How does the speed of this build compare to polyrhythmic's? I tried that and unfortunately it was unbearably slow even off NAND. I guess it's back to WinMo for a little while
Click to expand...
Click to collapse
I may be a little biased but I would use this as my only phone, comparable to openeclair on my mytouch without the swap turned on.
screen rotation
I the screen flips the wrong way instead of going back to portrait mode do this:
open "spare parts" uncheck "launcher rotation"
slm4996 said:
I the screen flips the wrong way instead of going back to portrait mode do this:
open "spare parts" uncheck "launcher rotation"
Click to expand...
Click to collapse
Or Settings/Sound & Display/ Uncheck Orientation
you didn't say weither tha camra works or doesn't
sheridan101 said:
you didn't say weither tha camra works or doesn't
Click to expand...
Click to collapse
Sorry, that would be a no for right now. Anybody got any tips? I'll update the 1st post.
Which nbh to use?
Ho do I know which .nbh file to use? There are so many of them.
For instance:
kaisimg-panel2-320-15-02-10.nbh
kaisimg-panel1-320-tilt-15-02-10.nbhWhat is the difference between the two?
What does the following stand for:
The panel2 and panel1
320 or 480
You get the picture... Basically - how do I know which one fits my device?
Thanks,
Eran
ebarten said:
Ho do I know which .nbh file to use? There are so many of them.
For instance:
kaisimg-panel2-320-15-02-10.nbh
kaisimg-panel1-320-tilt-15-02-10.nbhWhat is the difference between the two?
What does the following stand for:
The panel2 and panel1
320 or 480
You get the picture... Basically - how do I know which one fits my device?
Thanks,
Eran
Click to expand...
Click to collapse
#1 check a default.txt that you used in the past to see what your panel type is, nobody can tell you what you have. I have a tilt and use panel 2. You may need to pick one and try, if the colors are messed up, try another
#2 the 320 is a resolution of 240X320 and the 480 is a resolution of 320X480
I always use the 320X480; then edit the /system/build.prop file to make the lcd.density 160; makes it close to 240X320 but you get all of the market apps
@ slm4996 any chance of getting this as a HaRET compatable? I have some programs that require I have windows, so I can't NAND now; and I would like to try this one out
INT Maps Navigation
I check your tar and i notice tha inside app folder there isn't Google Maps, Nav launcher and so on, it's possible to add it manually, importing the right apks inside the folder, and if it's possible where i can find the apks?
P.s. Your old build is great, as soon as my phone return from repairing, I will be glad to try this new baby...
Can I run this build from SD card?
j101399j said:
#1 check a default.txt that you used in the past to see what your panel type is, nobody can tell you what you have. I have a tilt and use panel 2. You may need to pick one and try, if the colors are messed up, try another
Click to expand...
Click to collapse
Correct, couldn't have said it better.
j101399j said:
#2 the 320 is a resolution of 240X320 and the 480 is a resolution of 320X480
I always use the 320X480; then edit the /system/build.prop file to make the lcd.density 160; makes it close to 240X320 but you get all of the market apps
Click to expand...
Click to collapse
If you get the 480 version my build.prop lcd.density is already set to 160. (@j101399j great minds think alike)
j101399j said:
@ slm4996 any chance of getting this as a HaRET compatable? I have some programs that require I have windows, so I can't NAND now; and I would like to try this one out
Click to expand...
Click to collapse
Give me about 15 minutes for a test version to upload and then:
http://homecncfun.com/android/KaiserDroid-1.0-haret.zip
new version
http://homecncfun.com/android/KaiserDroid-1.1-haret.zip
Please test both.
Please note that you will have to do a install the first time you run haret so be sure to watch for the prompt to hold D-pad center.
milanche said:
Can I run this build from SD card?
Click to expand...
Click to collapse
You can try the package in post 16
samtruman said:
I check your tar and i notice tha inside app folder there isn't Google Maps, Nav launcher and so on, it's possible to add it manually, importing the right apks inside the folder, and if it's possible where i can find the apks?
P.s. Your old build is great, as soon as my phone return from repairing, I will be glad to try this new baby...
Click to expand...
Click to collapse
Unless you are across the big pond google maps should install from the Market. Navstarter I can look into.
Inclusion/removal of apps?
Should I add or remove any apps out of the default build?
So far we have requests for:
Google maps
Navstarter
I'm not sure how I feel about including maps since it can be downloaded from the Market on this build...
slm4996 said:
Should I add or remove any apps out of the default build?
So far we have requests for:
Google maps
Navstarter
I'm not sure how I feel about including maps since it can be downloaded from the Market on this build...
Click to expand...
Click to collapse
My intention is to have the modiefied version of Google Maps with Nav launcher, 'cause I'm from Italy and in Europe Google Maps don't have the navigation enabled, we must use maps4.0.0-brut4.apk to enable it.
I have tried to put it insiede your old build but without success, it doesn't let me install the needed file to get it working, maybe i forget to put something else needed...i'll try with the new one as soon as possible....
The files that i'm writing about are inside OptionalApps pack of last poly builds...
Location Aware is an automatic volume profile switcher.
This application works out of the data received from GSM signals.(NO CDMA)
so almost all windows mobile devices can use it.I developed it on my elf and it seems it is working
Requires GSM network, Windows Mobile , .Net CF 3.5
1. Battery Friendly, No active background process.
2. No GPS needed.
3. User configurable interval to check for location.
4. Can save settings automatically v0.3
Well it works like this: (May change per version)
1. Install it.
2. Open the Location Aware(from programs)
3. When ever you start the app it will vibrate the device 2 times and then asks "Add this Location".
4. Click OK and it prompts to save the volume level for this location and save.
5. Adjust the volume level as you desire from the Slider on right hand side of screen.
6. Then goto Menu and Save Location Mode, this should save the setting for this location(Prompt will be displayed).
7. Now you can let the application run itself every X mins to check for new location and prompt you whenever a new location is found.
8. To set the interval time goto Menu -> "Stopped" this should open up a panel to enter the interval time, fill it and click set. "Stopped" should be changed to "Running". Now you can Exit.
9. If prompt is not dismissed or OKayed within 1 min(Automode). It dismisses itself and will prompt again if new location is found after next X mins.
10. The limit for interval is 2-60 mins, that means the app will run itself after every X mins and check for location, if a new location is found it vibrates
and then asks you to save this location or not, in case you dont respond to it, it will close itself after 1 min.
and in case the location was already saved it will automatically apply the volume profile.
Basically as you keep on using it the database keeps on growing and in parallel profile settings gets more customized.
PS: You may notice that the taskbar volume indicator is not changed, but that is normal. The volume setting is still applied as per your choice this issue is fixed in v0.3
V0.2
1. No alert popup will be displayed to inform select n save the location.
2. Save the location mode directly by clicking the volume level image.
v0.3
1. Reflect the volume level changes in the taskbar volume icon
2. New mode added "AutoSave", enabling it makes the app save new location automatically with the last volume preference, whenever a new location is found.
PS. AutoSave mode works in Scheduled mode, if you have set the app to run after a scheduled interval with autosave mode enabled and it detects a new location it will prompt a message-box, if you don't give it a response i.e ignore it, it will add the location automatically after 1 min and will dismiss itself.
for users of previous versions:
It will use the already existing database of location settings, just install it over the previous version.
PCBuddy
This app is used to plot all the collected points by the location aware app on google maps.
Unzip the files and then copy the locations.db file from your device to the same folder on your system. Once the file has been copied Run CreateMap.exe this should generate a html file in the same folder. Run that and see for yourself
Please replace the dll in PCBuddy with the one in 64Bit.zip in case you are using a 64Bit Windows
Suggested setting:
For the first time I suggest to keep the interval at around 5 mins so that it can grab almost all the desired locations. once you feel it is having settings for your daily use u may turn the interval to a higher(suggested 15 mins) so that it can apply the volume settings for the known locations.
SUPPORT LATE NIGHTS- DONATE!
No comments???
Great idea !
By using GSM signal to get your position you avoid to use the gps which take more time to get position + a little battery consumption.
We certainly can find a lot of functions linked to this automatic profile/location system
I will try your app
Vesperial said:
Great idea !
By using GSM signal to get your position you avoid to use the gps which take more time to get position + a little battery consumption.
We certainly can find a lot of functions linked to this automatic profile/location system
I will try your app
Click to expand...
Click to collapse
Thanks Vesperial, hope it works out fine
Hmmm
hmmm and I thought this was useful
it is a nice idea
but as a nice addon it would be cool, if it would be possible to add names for specific cell id locations and if the app would be a today plugin
diboze said:
it is a nice idea
but as a nice addon it would be cool, if it would be possible to add names for specific cell id locations and if the app would be a today plugin
Click to expand...
Click to collapse
thanks diboze,
well your ideas are nice but since i want to keep the user inputs to minimum i went on this way and about making it a today plugin...hmm i m not sure how to do that with a C# app
but suggestions are always welcome
Great Concept!!!!
Just saw your P.S. that the volume icon will not change accordingly...but it works as intended. (Please Fix) Is there a radius on the set locations? I work across the street from our main mall, is why I ask.
I love this concept as I saw the other O.S. had a similar app. (Sweet Dreams)
~PLUR~ Peace Love Unity Respect
~DJyoSNOW~
djyosnow said:
Just saw your P.S. that the volume icon will not change accordingly...but it works as intended. (Please Fix) Is there a radius on the set locations? I work across the street from our main mall, is why I ask.
I love this concept as I saw the other O.S. had a similar app. (Sweet Dreams)
~PLUR~ Peace Love Unity Respect
~DJyoSNOW~
Click to expand...
Click to collapse
Hi djyosnow,
understood your concerns about the radius thing but thaz not in myhands as that thing is dependent on lot of factors like, your disance from tower, signal strength etc. But still you may experiment if you get new location alert in case you are at your office.
n yes this is really nice ~PLUR~
Peace Love Unity Respect
Very good application, specially like me who travel a lot from office to client to mall and to our factory
I will give my comment after i use it...
devya said:
Very good application, specially like me who travel a lot from office to client to mall and to our factory
I will give my comment after i use it...
Click to expand...
Click to collapse
Sure will wait for your inputs. n hope you find it useful
v0.2 Out
Some modification in GUI and user interaction
Re mohitsapru,
i tested your app on my HD, it worked well
I have one suggestion to ease the way we can use it, an option like 'Save the actual sound profile automatically when a new unknown position is found'
Then we can move without thinking about it but it will be good as an enabled/disabled option.
Good job !
Vesperial said:
Re mohitsapru,
i tested your app on my HD, it worked well
I have one suggestion to ease the way we can use it, an option like 'Save the actual sound profile automatically when a new unknown position is found'
Then we can move without thinking about it but it will be good as an enabled/disabled option.
Good job !
Click to expand...
Click to collapse
Thanks Vesperial,
well about your suggestion it sounds good. right now it is dismissing it after 1 min i need to save the location automatically.. hmm sounds OK... will do it next time.
Thanks,
Mohit
Does this app able to detect the change of location if the device switched off(suspended) by power button?
For example:
1. Save volume setting at location A and location B
2. At location A, press power button to turn off the device
3. Move the device from location A to location B
4. Will the volume be changed automatically (without turning on the device) at location B?
ahlok_hk said:
Does this app able to detect the change of location if the device switched off(suspended) by power button?
For example:
1. Save volume setting at location A and location B
2. At location A, press power button to turn off the device
3. Move the device from location A to location B
4. Will the volume be changed automatically (without turning on the device) at location B?
Click to expand...
Click to collapse
Yes, it does. But dont forget to exit whenever you save a location setting
hey there,
this looks brilliant! ill try this out tomorrow!
thanks a lot
MG
MysticGenius said:
hey there,
this looks brilliant! ill try this out tomorrow!
thanks a lot
MG
Click to expand...
Click to collapse
Thanks MG,
Do let me know of your suggestions and experience using it.
Thanks,
Mohit
I have run it on my Samsung I900 Omnia and i think it works perfect.
But here some ideas:
It would be great if you can add 2 or more cells to 1 location (Because i have here to cells at home, and if I use UMTS 3G i had another one)
If you write the cell id a little bit greater.
And expert mode were you add name for cells (i see this wish earlier here, too), and can add more things.
Dtrieb said:
I have run it on my Samsung I900 Omnia and i think it works perfect.
But here some ideas:
It would be great if you can add 2 or more cells to 1 location (Because i have here to cells at home, and if I use UMTS 3G i had another one)
If you write the cell id a little bit greater.
And expert mode were you add name for cells (i see this wish earlier here, too), and can add more things.
Click to expand...
Click to collapse
Hi Dtrieb,
Thanks for trying it out.
Well i will think about the other two options/suggestions but i am not able to get what you meant by the first suggestion Which 2 cells are you referring to?
[App] DNetworkTools (WorkInProgress Release) v0.1.73 (04 Jul, 2010)
Description:
Various IP address related tools for Network Engineers. Very handy!!
Purpose:
I did not find such good tool with finger friendly interface, so thought to put together all my old windows application code in to a good interface.
Luckily found SenseSDK by Edward, worked out great, tooks me few hours to put this application. Still it is work in progress and released for testing.
All the features do work without issues.
UI Credits:
SenseSDK by Edward Boelzner (eboelzner)
Can't find source from where i got icon which i used for application
Features:
General​
Finger Friendly
Easy Interface
Open Source (Will be hosted on CodePlex)
Works on most Windows Phones
Tools​
IPv4 Conversions
IPv4 Addresses
IPv4 Subnet Calculator
IPv4 CIDR Calculator
IPv4 Wildcard Mask Calculator
IPv4 Ping Tool (little buggy)
Future Features:
Few UI Bug Fixes
Save last used IP
Export details to file
Export IP ranges
IPv6 Tools
Members can request more features
Requirements:
.Net Compact Framework 3.5
Screenshots:
Screenshots are attached
Download:
Cab file is attached
Please report bugs and feedbacks.
Version History
v0.1.73 (04 Jul, 2010)
+ First work in progress release with basic features.
Reserved-2
Reserved-3
looks interesting. will try in the morning. thanks
good application ... easy for me to conversion ip class subnet
core7x said:
good application ... easy for me to conversion ip class subnet
Click to expand...
Click to collapse
Do let me know if it works ok on your device. just need feedback, will help me to improve or enhance.
Thanks.
Maria and Josef (holy sh...t ), this is what i need for a longer time. Please hold up the good work. Special thank you for sharing this very helpfull app.
- ping tool = amazing
- ip4 conversion = working perfect
- addresses = working
- subnet calculator = all 3 are working
- cidr calculator = perfect working
- wildcard mask calculator = working perfect
- settings -> about = not working
mike2nl said:
Maria and Josef (holy sh...t ), this is what i need for a longer time. Please hold up the good work. Special thank you for sharing this very helpfull app.
- ping tool = amazing
- ip4 conversion = working perfect
- addresses = working
- subnet calculator = all 3 are working
- cidr calculator = perfect working
- wildcard mask calculator = working perfect
- settings -> about = not working
Click to expand...
Click to collapse
Thanks for feedback..
i will release next version in next few days. will be fixing few bugs i found in cidr calc which crashes when changed the mask., about screen is not coded yet, less important. .
If you have any request then do let me know.
working good, maybe need to have some ipv6 stuff
because next gen ip will be ipv6
im suggest
ipv6 ip class / unicast / multicast
ipv6 subnet calculator
maybe in the future also, mobile phone will have ipv6 tunnel client !!
so that , we can use ipv6 mobile number portability
will love it
thanks
put some network scanner, port scanner and wireless radar make it a network auditing tool like retina and netstumbler
that would be awesome!
i wish i could help in "technical" way
core7x said:
working good, maybe need to have some ipv6 stuff
because next gen ip will be ipv6
im suggest
ipv6 ip class / unicast / multicast
ipv6 subnet calculator
maybe in the future also, mobile phone will have ipv6 tunnel client !!
so that , we can use ipv6 mobile number portability
will love it
thanks
Click to expand...
Click to collapse
Thanks, IPv6 already under development, but will be ready till next few releases and when IPv4 gets stable. but surely IPv6 will be part of it, i myself need it too.
randolph2000 said:
put some network scanner, port scanner and wireless radar make it a network auditing tool like retina and netstumbler
that would be awesome!
i wish i could help in "technical" way
Click to expand...
Click to collapse
Port scanner will be part of it, but not yet developed but will be done.
Cant say about rest at this point.
Thanks.
Ping Not Working Properly
Ping only works fine for the first time. It requires application restart to make it work. I'm using HTC HD2.
Suggestion: More network commands such as TRACERT, TELNET etc.
moon1978 said:
Ping only works fine for the first time. It requires application restart to make it work. I'm using HTC HD2.
Suggestion: More network commands such as TRACERT, TELNET etc.
Click to expand...
Click to collapse
That was the bug in Ping which was identified, and will be fixed, already resolved in development, should patch it in next release.
Tracert/telnet good idea.
will try to include them in my todolist.
thanks.
great tool,
could have used such a useful tool during my aprenticeship.
settings --> exit is not working on my hd2
Sweet will try it soon my device won't install cab now.will look into it
Tried it, loved it. I always have problems calculating Class B IPs and I was hoping for one for my HD2 when I saw an Android version. I think it'll be better if there's support for IPv6 as well. Also, I used it for a while and found out the tool lagged about 1 to 2 second when switching to another menu, I'm still okay with that though.
bdeath said:
great tool,
could have used such a useful tool during my aprenticeship.
settings --> exit is not working on my hd2
Click to expand...
Click to collapse
Exit issue fixed already. thanks for informing.
bloodychaos said:
Tried it, loved it. I always have problems calculating Class B IPs and I was hoping for one for my HD2 when I saw an Android version. I think it'll be better if there's support for IPv6 as well. Also, I used it for a while and found out the tool lagged about 1 to 2 second when switching to another menu, I'm still okay with that though.
Click to expand...
Click to collapse
Yes there is a big lag sometimes but not always, will try to take a look in deep and fix/optimize it.
thanks.
Hey all,
My company is developing a GPS app which I am being a lab rat for and testing on my SGS2, for some reason it is keeping the GPS on way too long but I wanted to log how much the app is actually turning it on. Are there any monitoring apps out there that log GPS usage in the same way as CPU/Data watchdogs do per app?
Thanks
Russ
Im actually interested in this too...
Fancy Widgets is set not to use GPS yet it still seems to have my GPS on a lot of the time
roakes said:
Hey all,
My company is developing a GPS app which I am being a lab rat for and testing on my SGS2, for some reason it is keeping the GPS on way too long but I wanted to log how much the app is actually turning it on. Are there any monitoring apps out there that log GPS usage in the same way as CPU/Data watchdogs do per app?
Thanks
Russ
Click to expand...
Click to collapse
indirectly by showing the wakelock caused by location service: BetterBatteryStats
is this what youre looking for ?
Hi there
I came across your post sometimes ago.
Now I was looking deeply in my system files to tweak something not related at all to GPS. And found erratically a config file related to the internal GPS
Am I smart ...I remembered your post and think this is for you :
But you have to get your hands dirty a little
The file path is system/etc/sirfgps.conf
the file is easily understandable with comments at the begining
as I understand you can enable GPS logging and choose the log filename.
You will find a line:
#DEBUGGING_FILES : 0 - no log file, 1 - log files enabled
and at the end
LOG_PATH=/sdcard/gps/csr
This is where the log file should be, if you enabled logging with the line
DEBUGGING_FILES=1
- and you can modify to whatever path you like
Was it that simple !
Well I have not tested it but it should work. no sure though, but I think your phone should be rooted or it could be done with adb....
And last important thing, you must mount the system folder rw before any change otherwise... Well you know...
Tell me if that was useful to you and your project...
Or just push the thanks button