Develop Bugs

[ACS][Odin]Stock EG30 Odexed with Root 3.0/Busybox 1.18.4

Big thanks to RoadRAGEN for helping me figure out an ext4 issue! Odin this to get Odexed stock EG30 with latest root and su binary and Busybox 1.18.4.
This does not wipe data.
I am not responsible for anything that happens to your phone. You do this at your own risk.
I have only tested this with the stock kernel and Bubby's CWM kernel.
Download​
IMPORTANT: Make sure you have installed the proper XP or Win7 drivers before starting. Also, remove the SD card from the phone (this may not be necessary, but having the SD card installed has caused Odin to fail for a number of people, so might as well just do it).
1. Extract the contents of the zip file to a folder
2. Open odin
3. Put your phone in download mode (Shut it off, wait for lights to all go out, then hold v-down + power)
4. connect phone (you should see odin put a Com4 or something like that in the first box. The actual number is NOT important what is important is something popped up there when you connected your device, meaning ODIN can see it)
5. The only box that should be checked is Auto Reboot.
6. You do not need to choose a pit file.
7. In the PDA Section choose the tar file. (Odexed-Rooted-Busybox-EG30.tar)
8. Hit start. It will do its thing.
9. If it fails than try a new cable.
10. If the phone hangs for any reason take the battery and sdcard out and let it sit for an hour. Put it back together and try again.

reserved just in case

reserved again

Sexy bro !

Link is up.

ty for this.

ahhhh!! finally!! thanks crawrj!
so to confirm, we can ODIN this and then bubblys CWM @ http://forum.xda-developers.com/showthread.php?t=1268037?

chip! said:
ahhhh!! finally!! thanks crawrj!
so to confirm, we can ODIN this and then bubblys CWM @ http://forum.xda-developers.com/showthread.php?t=1268037?
Click to expand...
Click to collapse
Yes. That is what I have done in testing.

So with this we will have as stock of a ROM as we can currently have, yet still have root and busybox? By stock, I mean the default, out of the factory stock ROM which many claim does not have the LOS issues? Just confused somewhat...

Dude, major win here. Good work!
Sent from my SPH-D710 using xda premium

How bad is it if you put the the tar file in the bootloader spot by mistake? It still worked and seems to be fine. Im rooted with stock kernel.
Thanks
Sent from my SPH-D710 using Tapatalk

Euclid's Brother said:
How bad is it if you put the the tar file in the bootloader spot by mistake? It still worked and seems to be fine. Im rooted with stock kernel.
Thanks
Sent from my SPH-D710 using Tapatalk
Click to expand...
Click to collapse
Nothing is bad as long as you can get into download mode no matter what you did. If it won't work you just odin it back.

HondaCop said:
So with this we will have as stock of a ROM as we can currently have, yet still have root and busybox? By stock, I mean the default, out of the factory stock ROM which many claim does not have the LOS issues? Just confused somewhat...
Click to expand...
Click to collapse
That is correct. It is a stock file system with root and busybox. This is not a kernel so it will not replace that or any issues with that.

total nooob about this but which file do i need?
Odin tar: coming soon.
MD5: e6adb2290a514af674366de7b460725d
http://dev-host.org/m0nd8k926g6c/Ode...sybox-EG30.tar
Odin 1.85 including instructions:
MD5: 69b41fc23052e9df82b5464928583b65
http://dev-host.org/006p4mwqzq2n/Odin3_v1.85.zip

rdcrds said:
total nooob about this but which file do i need?
Odin tar: coming soon.
MD5: e6adb2290a514af674366de7b460725d
http://dev-host.org/m0nd8k926g6c/Ode...sybox-EG30.tar
Odin 1.85 including instructions:
MD5: 69b41fc23052e9df82b5464928583b65
http://dev-host.org/006p4mwqzq2n/Odin3_v1.85.zip
Click to expand...
Click to collapse
Odin is the program you use to flash the tar. The tar is the actual package.

crawrj said:
Odin is the program you use to flash the tar. The tar is the actual package.
Click to expand...
Click to collapse
oh ok i have odin already that is why i was confused what this was thanks

Glad to have a stock ROM available

I am on zedo's v4 will this work over it?

crawrj said:
That is correct. It is a stock file system with root and busybox. This is not a kernel so it will not replace that or any issues with that.
Click to expand...
Click to collapse
Ohhh ok, so I can flash this and keep my current Zedomax kernel if need be? Sweet! Thanks!
Sent from my Samsung Galaxy S II Epic Touch 4G WTF BBQ

HondaCop said:
Ohhh ok, so I can flash this and keep my current Zedomax kernel if need be? Sweet! Thanks!
Sent from my Samsung Galaxy S II Epic Touch 4G WTF BBQ
Click to expand...
Click to collapse
So i guess we can flash this over zedo's v4 anyone try yet?

[Discussion] Rogue FC06 Repack

Questions/Comments/Issues go in here

Restoring Gingerbread Images
I am attempting to use rogue_ET_recovery_1.2.2_FC06 to restore to a Android 2.3 backup. I have tried to restore a couple of backups, in each case, I am getting a MD5 mismatch. Each time I did a OS backup, recovery did create a MD5 sum.
These backups are located on the external sd card.
Are there any tools that can parse the backups and verify MD5 sums?
Any other suggestions?
Thanks.

ghfuchs said:
I am attempting to use rogue_ET_recovery_1.2.2_FC06 to restore to a Android 2.3 backup. I have tried to restore a couple of backups, in each case, I am getting a MD5 mismatch. Each time I did a OS backup, recovery did create a MD5 sum.
These backups are located on the external sd card.
Are there any tools that can parse the backups and verify MD5 sums?
Any other suggestions?
Thanks.
Click to expand...
Click to collapse
Can't restore from 4.0+ to 2.X roms...odin EL29 stock + CWM and restore from there

look i know i already said thanks for the amazing "steady" releases but I personally and I know allot of other people are grateful for your work THANKS mAN!

If I odin this can I use the jig to remove the triangle? Has anyone does this yet?

DutchDogg54 said:
Can't restore from 4.0+ to 2.X roms...odin EL29 stock + CWM and restore from there
Click to expand...
Click to collapse
would that let me upgrade from odin el29 to fc06? then restore the data?
nvm its restoring the data. it had an option to let me choose which to restore. i am going to assume data is contacts and the like at least i hope so . i had 2.3.4 or 2.3.6 on there. don't remember which.

If I were to add an init.d folder under the path /system/etc/ would all scripts I place under that folder work?

Is it OK to flash format all 06 stock, 05 modem then 06 repack from calks 2.9.2 all in the same session then reboot

gps still borked and firefox its hard to click links just seems to resize the page

Can I use fC06 kernal while on stock rooted FC05 ROM and flash to FC06 ROM?

mauricehall said:
Can I use fC06 kernal while on stock rooted FC05 ROM and flash to FC06 ROM?
Click to expand...
Click to collapse
I did this. Just waiting for calks rom now.

It seems the link isn't working ,been trying for 1/2 hour .

Steady Hawkin said:
Warning-
***DO NOT USE THIS RECOVERY TO FLASH ANY ROM***
Click to expand...
Click to collapse
Can you please briefly explain why not to flash roms from this recovery? I will heed your warning but i'm curious and could use a little explanation. Thanks for all your time and work!

Can I flash ICS4ICS theme through this?

Do you have any plans or knowledge of another's plans to support the USCC R760? It's painful over here without any support (re: ports from a bigger carrier).
Alternately, do you want an apprentice? What I lack in skills, I make up for in moxie!

tx_dbs_tx said:
Can you please briefly explain why not to flash roms from this recovery? I will heed your warning but i'm curious and could use a little explanation. Thanks for all your time and work!
Click to expand...
Click to collapse
I too would like to know what this is.
Sent from my SPH-D710 using Tapatalk

satur9ine said:
I too would like to know what this is.
Sent from my SPH-D710 using Tapatalk
Click to expand...
Click to collapse
Known Issues-
-Flashing anything for ICS is risky and could result in bricking your device. It has been said a safe bet is using stock EL26 CWR to flash. By flashing our repack you agree that we are not held liable.

DutchDogg54 said:
Can't restore from 4.0+ to 2.X roms...odin EL29 stock + CWM and restore from there
Click to expand...
Click to collapse
I used odin EL29 + CWM to get back to 2.3.6, but still encountered MD5 mismatch when I attempted to restore several backups of Blazer rom. I finally had to flash via recovery the Blazer rom. I did happen to rename the backup folders at the time of the backups. I read somewhere else in the forum where renames with spaces will clobber MD5 checksum.
Thanks.

I have been using all of his repacked versions to flash themes, app packs, and updates... so that is a huge bit of misinformation there!
I haven't even software bricked my phone and I've literally flashed every single leak in the past week or so.
Just follow directions folks.
Sent from my SPH-D710 using Xparent Cyan Tapatalk

Reignzone said:
I have been using all of his repacked versions to flash themes, app packs, and updates... so that is a huge bit of misinformation there!
I haven't even software bricked my phone and I've literally flashed every single leak in the past week or so.
Just follow directions folks.
Sent from my SPH-D710 using Xparent Cyan Tapatalk
Click to expand...
Click to collapse
Honestly its crazy how many different opinions exist on this topic. Some of the top dogs are saying this kernel / recovery shouldn't be used for flashing roms, others say you can't nandroid from ICS to GB, others say Odin is the only safe way to go...
As long as this confusion persists, there is only one sure thing...noobs like me will be brickin' ...
Sent from my SPH-D710 using XDA

Problem Flashing Roms

I'm currently running the stock EL29 with root and CWM but whenever I try to install a custom rom (AOPK, CM9, etc...) through CWM, it says "Instillation Aborted" as if they weren't made for this phone when I know they were. What's going on?

.HaVoC. said:
I'm currently running the stock EL29 with root and CWM but whenever I try to install a custom rom (AOPK, CM9, etc...) through CWM, it says "Instillation Aborted" as if they weren't made for this phone when I know they were. What's going on?
Click to expand...
Click to collapse
Silly question, and not assuming, did you use autoroot for cwm?
May want to Odin to el26 and autoroot cwm ans try it that way.
I personally Odin back to el29, autoroot, and (knock on wood) never had an issue.
Sent from my SPH-D710 using XDA

.HaVoC. said:
I'm currently running the stock EL29 with root and CWM but whenever I try to install a custom rom (AOPK, CM9, etc...) through CWM, it says "Instillation Aborted" as if they weren't made for this phone when I know they were. What's going on?
Click to expand...
Click to collapse
Usually that happens on a bad download. Did you download them on your phone or PC?

It turns out that is was just the version of CWM that I was using but now I have a new problem. I flashed CM9 and everything worked EXCEPT the data connection so then I flashed AOPK and had the same problem. The only way I can get online is via wifi. How do I fix this?

.HaVoC. said:
It turns out that is was just the version of CWM that I was using but now I have a new problem. I flashed CM9 and everything worked EXCEPT the data connection so then I flashed AOPK and had the same problem. The only way I can get online is via wifi. How do I fix this?
Click to expand...
Click to collapse
Check you baseband in settings>about phone. If it says unknown then just flash a modem of your choice. This has happen to me. On several occasions.
Sent from my SPH-D710 using xda premium

.HaVoC. said:
It turns out that is was just the version of CWM that I was using but now I have a new problem. I flashed CM9 and everything worked EXCEPT the data connection so then I flashed AOPK and had the same problem. The only way I can get online is via wifi. How do I fix this?
Click to expand...
Click to collapse
Cool that ya got to flash from though!
Sorry, I don't use CM9.
I can try on my other e4gt later and test though.
Sent from my SPH-D710 using XDA

krazy_smokezalot said:
Check you baseband in settings>about phone. If it says unknown then just flash a modem of your choice. This has happen to me. On several occasions.
Sent from my SPH-D710 using xda premium
Click to expand...
Click to collapse
It says "S710.10 S.EL29"
Isn't EL29 for GB only or something?

.HaVoC. said:
It says "S710.10 S.EL29"
Isn't EL29 for GB only or something?
Click to expand...
Click to collapse
No its ok to have an older modem and be running ICS. They can be "mismatched."

slick_rick said:
No its ok to have an older modem and be running ICS. They can be "mismatched."
Click to expand...
Click to collapse
And I have found, in the boonies that I'm in, el29 modem works the best for me on any ics builds..
Sent from my SPH-D710 using XDA

.HaVoC. said:
It says "S710.10 S.EL29"
Isn't EL29 for GB only or something?
Click to expand...
Click to collapse
Did u get it to work yet?? Try to Odin stock gb el29 rom. And start from scratch...
Sent from my SPH-D710 using xda premium

krazy_smokezalot said:
Did u get it to work yet?? Try to Odin stock gb el29 rom. And start from scratch...
Sent from my SPH-D710 using xda premium
Click to expand...
Click to collapse
I started from scratch and followed all the steps until I ended up in the same boat. AOKP Build 38 working perfectly EXCEPT data. I tried the EL29 and FE10 kernels but neither made a difference.

.HaVoC. said:
I started from scratch and followed all the steps until I ended up in the same boat. AOKP Build 38 working perfectly EXCEPT data. I tried the EL29 and FE10 kernels but neither made a difference.
Click to expand...
Click to collapse
Try going back to gingerbread and flashing the EL26 kernal. Then flash the ICS rom you want through that recovery.

AOKP and CM9 have problems with data. every time you or system turn off screen say goodbye to data until 1.enable disable airplane mode or 2.reboot that's the main reason I stay away from these awesome roms until source arrives.
These roms are the best. IMO
1.odin back to stock el29 full reset oc
2.boot update profile and prl
3.copy the rom files to sd
4.turnitoff it off
4.enter download mode and flash el26+cmw for AOKP or el29+cwm direct boot for CM9
5.clear cache, factory data reset, clear dalvik on advance menu
6.go back and select install zip from sd card and choose the rom and flash it
7.flash gapps if apply
8.go back and select reboot system
9.enjoy these awesome roms.
Sent from my SPH-L710 using Tapatalk 2

I think I FINALLY got it to work. I started stock with rooted EL29 Odin-OC, flashed the "StockCWM-EL26.tar.m5d" in Odin, flashed the AOKP build 37 rom, flashed gapps, then flashed the FE16 kernel AND modem. When I rebooted the data was working.

Not that I am advocating this, and I am far from an expert, but I odin flash a stock rooted rom (SPH-D710.FC22_CL287574_ROOTED-oc-sfx) without going back to el29 just to have a nice clean stock rom to flash over with something else (like FIFO2). I just try to make sure I do everything in the same session so I don't get stuck in a stock recovery.
My order when flashing (non-Odin):
calkulin's format all
Modem (sometimes...if newer is available)
Rom
Kernel (with a custom recovery; sometimes the roms come with a stock recovery so if you reboot before installing a custom one, you'll have to either use odin to flash a custom recovery or mobile Odin)
any additional items that the rom didn't include (like gapps, etc.)
reboot
---------- Post added at 02:09 AM ---------- Previous post was at 01:58 AM ----------
Another thing to keep in mind is that AOKP was ported to the E4GT. That could cause issues depending on what you're coming from. Make sure to read all the instructions from the dev before flashing. If the worst happens, buy insurance on your phone and smash it...That's what I did with my evo when I bricked it.

[FL16] CWM Flashable Modem, Kernel

Thanks to Sextape for the leak!
I did not have a chance to test it yet, but for the whom want to test it out!
FL16 modem - zip - Mirror1
MD5 checksum: 16d0bf291fbb72f88d8ef010881fcb79
7f85442c46e37cc328ebb98eb61003c5 (for only 3 people who downloaded modem very first after the upload)
FL16 stock Kernel - zip Mirror1
MD5 checksum: 5346cefd4d1605a7665fed72c5cb2f5e
Note: Typo on flashing FL16 modem. It shows FL15. Please ignore it. It's FL16. - Fixed and uploaded again!

Awesome! Thanks, Kobridge!

Perfect thank you! Flashing now!
Sent from my SPH-D710 using xda premium

On FL16 kernel and modem. Im already on KO's tweaked FL06.
Seems smooth so far. I have an airave at home so i can't really guage the modem yet. And no wimax here in az.

Simply AMAZING! KO have a great X-Mas and New Years and thank you

kernel is not working. havent tried modem.

helix4u said:
kernel is not working. havent tried modem.
Click to expand...
Click to collapse
Both worked fine here

Getting really nice 4G speeds at my house so far fk09 & FL16 have had the fastest 4G speeds for me
Sent from my SPH-D710 using xda premium

mradlauer said:
On FL16 kernel and modem. Im already on KO's tweaked FL06.
Seems smooth so far. I have an airave at home so i can't really guage the modem yet. And no wimax here in az.
Click to expand...
Click to collapse
im in az also! no wimax sucks but then again my service is crappy everywhere in az except for calls which i dont use much lol
Sent from my SPH-D710 using xda app-developers app

Awesome. Thank you KO
Sent from my SPH-D710 using Xparent Blue Tapatalk 2

Thanks for this! Crazy day at work and didn't have a chance to compile.

On my build it says FL04 after I flashed the kernel
Sent from my SPH-D710 using xda premium

Unable to flash modem. Kernel flashes properly.

graydiggy said:
Unable to flash modem. Kernel flashes properly.
Click to expand...
Click to collapse
Can you be more specific on how you're trying to flash the modem? What recovery?
Sent from my SPH-D710 using Xparent ICS Tapatalk 2

MoHoGalore said:
Can you be more specific on how you're trying to flash the modem? What recovery?
Sent from my SPH-D710 using Xparent ICS Tapatalk 2
Click to expand...
Click to collapse
Sorry... EL29 Directboot. Flashing off of external SD threw and error 7 with an "error on sd card".
EDIT: script aborted (no error message)E:Error in /sdcard/FL16_Modem.zip
(Status 7)
Installation aborted.

graydiggy said:
Sorry... EL29 Directboot. Flashing off of external SD threw and error 7 with an "error on sd card".
EDIT: script aborted (no error message)E:Error in /sdcard/FL16_Modem.zip
(Status 7)
Installation aborted.
Click to expand...
Click to collapse
Use the EL26 Kernel - tar and zip provided in here
Starting from this ROM, I started using EL26 CWM instead of FF18 CWM.

kobridge said:
Use the EL26 Kernel - tar and zip provided in here
Starting from this ROM, I started using EL26 CWM instead of FF18 CWM.
Click to expand...
Click to collapse
What exactly are you saying? From what I am getting here, you want me to go all the way back to an EL26 ROM to flash a modem. It seems like there isn't an EL26 kernel with a CWM in what you linked, so I am confused.

graydiggy said:
What exactly are you saying? From what I am getting here, you want me to go all the way back to an EL26 ROM to flash a modem. It seems like there isn't an EL26 kernel with a CWM, so I am confused.
Click to expand...
Click to collapse
grab the el26 stockcwm from the repo in whatever format you prefer..

graydiggy said:
What exactly are you saying? From what I am getting here, you want me to go all the way back to an EL26 ROM to flash a modem. It seems like there isn't an EL26 kernel with a CWM in what you linked, so I am confused.
Click to expand...
Click to collapse
Flash the el26cwm kernel
Pull battery
Boot into recovery
Flash fl16 modem zip
Flash fl16 stock kernel
Reboot
Enjoy.

Dalek_Caan said:
grab the el26 stockcwm from the repo in whatever format you prefer..
Click to expand...
Click to collapse
That worked. Thank you.

[Q] Updating to newer rom

So i recently received a phone from my cousin.
Fairly new to the android scene. However, id like to update the phone to Jellybean.
Can someone point me to a guide that I can follow to get it on a JellyBean Rom?
The stats on the phone, which is on Sprint, is as follows:
Android Version: 4.0.4
Baseband Version: S710.10 S.EL29
Kernel Version: 3.0.15-SPH-D710.FE22-CL612283
Build Number: RUJELUS22 The Blu Kuban Fe10 1.0.3.7
Hardware Version: d710.10
Rogue ET Recovery 1.2.3 (v5.0.2.8)
Thanks for any help.

Are you looking for a TW type of ROM or AOSP /AOKP? What features are you looking for?
Sent from my SPH-D710 using xda app-developers app

Id be looking for root access, tethering, decent battery life (if it exists), something with decent speed

That is an older version of Blu Kuban. Check out the development section and pay close attention to the directions in the OP of the rom. Not all kernels are safe for flashing.
I would start with a one click rooted rom and go from there. The current jsllybean leak JB08 is running nicely.

someguyatx said:
That is an older version of Blu Kuban. Check out the development section and pay close attention to the directions in the OP of the rom. Not all kernels are safe for flashing.
I would start with a one click rooted rom and go from there. The current jsllybean leak JB08 is running nicely.
Click to expand...
Click to collapse
Do you mind pointing me to a link for the JB08? I tried searching but could not find it.

I actually like this one. http://forum.xda-developers.com/showthread.php?t=2133260
It mentions:
"Coming from another ROM:
1. Have a safe (preferably EL26 cwm) recovery"
How do I know if i have a safe recovery?

sumdude said:
I actually like this one. http://forum.xda-developers.com/showthread.php?t=2133260
It mentions:
"Coming from another ROM:
1. Have a safe (preferably EL26 cwm) recovery"
How do I know if i have a safe recovery?
Click to expand...
Click to collapse
Kernels that have the emmc bug patched have safe recoveries. EL26 recovery is a safe recovery because it's a gingerbread kernel and the bug didn't exist. So flash the kernel, boot into recovery, flash that rom and you're good to go. There's also a el29 direct boot kernel somewhere around here. I use that all the time. The recovery you're on is not safe so don't try flashing anything or wiping the data. You can flash kernels with a program called Odin or an app called mobile Odin. Everything I've mentioned you can find on xda. Mobile Odin you can get on the play store. I think there is a lite version on xda but I'd recommend getting the pro version and supporting the development.
Sent from my SPH-D710 using xda app-developers app

sumdude said:
I actually like this one. http://forum.xda-developers.com/showthread.php?t=2133260
It mentions:
"Coming from another ROM:
1. Have a safe (preferably EL26 cwm) recovery"
How do I know if i have a safe recovery?
Click to expand...
Click to collapse
I recommend using a decent internet connection while downloading. 3G might cause a bad download. 4G or Wi-Fi for the download. I prefer Wi-Fi.
1. Download the EL26 CWM recovery.
2. Download the ROM.
3. Download the necessary Gapps.
4. Flash the EL26 recovery with either A. Mobile Odin or B. PC Odin.
5. Press up then down then up then down to enable pressing the power button to select the highlighted option.
6. Wipe data/factory reset.
7. Install zip from SD card. Select the ROM from wherever it is on the SD. Most likely in the Download directory. Select yes to begin flashing.
8. Install zip from SD card. Select Gapps from wherever it is on the SD. Select yes to flash Gapps.
9. Reboot and profit.
Sent from my Slim E4GT using xda premium

Awesome! thanks. I will go ahead and give it a shot now.

Got it working. However, the guide mentions using a version of google apps that built for 4.2.1. Took me some googling but found the build for 4.2.2 http://goo.im/gapps/gapps-jb-20130301-signed.zip
Thanks again.