Develop Bugs

[ACS][How to] Everything EL26 Android 2.3.6

I was requested by MANY people to make this thread, as I did with EK02 and EL13. So I figured I would. Just videos on everything having to do with the latest LEAKED build EL26.
How to install Stock EL26:
http://www.youtube.com/watch?v=4gqMqZpBc7E
Review of Stock EL26:
http://www.youtube.com/watch?v=uqdBFSxxGWs
How to install the EL26 modem:
http://www.youtube.com/watch?v=0uGAamjtNwk
Modem Speed Test: EL13 vs EL26 on the Samsung Epic 4G Touch:
http://www.youtube.com/watch?v=lC4bwKx51CY
Be sure to subscribe to me

Nice thanks! I'll interested to see if others also see an improvement in 3G download speeds on the EL26 modem.

Dchibro said:
Nice thanks! I'll interested to see if others also see an improvement in 3G download speeds on the EL26 modem.
Click to expand...
Click to collapse
I'm getting 3MB down with EL26. I got around 1 MB down with el02 so I thinks its way better
Sent from my SPH-D710 using xda premium

Great video! Love all of your videos, very nice to look at and straight to the point!
Are there any changes to the 4G radio/enhancements to 4G aside from the enhancements to the 3G radio in EL26?

so can i use any rom or do I have to be stock to use this modem?

BigRitz said:
so can i use any rom or do I have to be stock to use this modem?
Click to expand...
Click to collapse
Yep, I just flashed it using Calk's 2.5.1 ROM using Odin

I can't update my Profile or PRL. It returns "Error: No Service Error"
Is anyone else having these problems?

Thanks man for everything you do, you're a true asset to the XDA community.

mrbaker823 said:
I can't update my Profile or PRL. It returns "Error: No Service Error"
Is anyone else having these problems?
Click to expand...
Click to collapse
yes, im having the same issue...
btw, thanks again for this vid!!!
---------- Post added at 02:30 PM ---------- Previous post was at 02:28 PM ----------
mrbaker823 said:
I can't update my Profile or PRL. It returns "Error: No Service Error"
Is anyone else having these problems?
Click to expand...
Click to collapse
Alright...I just rebooted my phone, updated profile and prl and everything went well...hope this helps!

OP updated
How to install Stock EL26:
http://www.youtube.com/watch?v=4gqMqZpBc7E
Review of Stock EL26:
http://www.youtube.com/watch?v=uqdBFSxxGWs

definately an improvement over the EL13, service in my area is poor at best so I needed this modem for sure.

BigRitz said:
so can i use any rom or do I have to be stock to use this modem?
Click to expand...
Click to collapse
I just flashed the modem alone in CWM, no problems, phone booted up fine.

phatmanxxl said:
I just flashed the modem alone in CWM, no problems, phone booted up fine.
Click to expand...
Click to collapse
how though thought it had be odin

trusted links to modem only tarball ?

BigRitz said:
how though thought it had be odin
Click to expand...
Click to collapse
Calkulin has flashable zips in the development section. Go him!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Flashable zip also posted by qbking77
http://forum.xda-developers.com/showthread.php?t=1352310
Sent from my E4GT

BigRitz said:
how though thought it had be odin
Click to expand...
Click to collapse
Yeah, see post above for flashable zip

[ODIN][TAR] SPH-D710.EL26_CL839620 (EL26 Modem/Kernel/ROM - Full Restore - Rooted)
This package is now available. Included are:
Full restore for EL26 Modem, Kernel, ROM (rooted) - 2 versions, one which resets your User Data. The other preserves your User Data. This will NOT trigger yellow triangle NOR will it increase ODIN flash count. It does NOT suffer from the issue with USB jig functionality being hampered/disabled.
Individual tar.md5 files for EL26 Modem, Kernel, ROM, and Rooted ROM. This is useful for Mac/Linux Heimdall users.

mrbaker823 said:
I can't update my Profile or PRL. It returns "Error: No Service Error"
Is anyone else having these problems?
Click to expand...
Click to collapse
I've never been able to update prl or profile (going back to several phones now) and really don't bother much with it.
Prl is easy to do with software (which I have and know how to do once you have the prl file). As for profile, quick call to C.S to provision account if I need to, otherwise once I have the MSL, I manually program.
Sent from my SPH-D710

I'm wary to flash this. My setup with Blazer ROM on EL13 is giving me great battery life and much better radio performance than my NS4G this replaced.
Think I'll wait a few days for more anecdotal evidence.
Sent from my SPH-D710

{Q} error in upgrading with odin as single file .md5

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
my Galaxy Y is official 2.3.5 and there's official 2.3.6 presented in this topic here
http://forum.xda-developers.com/showthread.php?t=1447360
i downloaded the one i need
Firmware: S5360JPKK2
Date :11.2011
Csc- MID
2.3.6
Link
the problem it's a single file, in searching the internet i found that to upgrade using single file -> we put the file in PDA slot and unmark re-partition and do start .
tried but failed to complete, the error is
Added!!
Odin v.3 engine (ID:19)..
File analysis..
Enter CS for MD5..
Leave CS..
Get PIT for mapping..
Firmware update start..
sbl.bin
BcmCP.img
Complete(Write) operation failed.
All threads completed. (succeed 0 / failed 1)
tried many times to change USB and restarting but failed also ..
any suggestions please ?

CWM cannot handle single file .md5 format either.

mai77 said:
CWM cannot handle single file .md5 format either.
Click to expand...
Click to collapse
then no hope to upgrade with single file ?
why then the company produced that version to us which wont work

harshadura said:
hey this is not a baby forum.. mind that!
Click to expand...
Click to collapse
)
it was just for fun ..

dr_tolba said:
why then did the company produced that version to us which won't work
Click to expand...
Click to collapse
#1 the version was leaked rather than produced.
#2 it will probably work, just only KIES can handle it. ODIN v1.85 cannot.

mai77 said:
#1 the version was leaked rather than produced.
#2 it will probably work, just only KIES can handle it. ODIN v1.85 cannot.
Click to expand...
Click to collapse
u r right
i used kies yesterday and updated to 2.3.6 smoothly and easy
thx

however, the single file archives can now be odinized. Doky73 found out how.

mai77 said:
however, the single file archives can now be odinized. Doky73 found out how.
Click to expand...
Click to collapse
Hello mai77. Sorry if I will revive this topic. I bricked my phone and I'd like to know how to odinize this kind of firmware because I have got an useless phone right now .
Could you help me?.
Thank you very much..

You can download the stock Rom from Docky's thread and flash it via Odin. He has made a lot of stock firmware flashable via Odin Life saver.
Sent from my GT-S5360 using XDA App

axilefoo said:
You can download the stock Rom from Docky's thread and flash it via Odin. He has made a lot of stock firmware flashable via Odin Life saver.
Sent from my GT-S5360 using XDA App
Click to expand...
Click to collapse
Hello, thanks for your reply.
I've been in Docky's post but I didn't find any flashable rom for my phone (GT-B5510L). I wanted to reply his post but I can't. I think there is a forum's policy.

jrballesteros05 said:
Hello, thanks for your reply.
I've been in Docky's post but I didn't find any flashable rom for my phone (GT-B5510L). I wanted to reply his post but I can't. I think there is a forum's policy.
Click to expand...
Click to collapse
Well, then try a private message maybe...! ;-)

download again
it seems that u some file is missing in downloading
Sent from my GT-S5360 using XDA premium

3G/4G Data Speeds on FE16 Modem

Need sum help here! I haven't been able to get decent data speeds since I've been using Sprint unless I'm on wifi. I just updated my modem to FE16, & the screenshots below are 4G/3G & wifi. Proxies are bypassed (0.0.0.0/0), & profile & PRL are updated. Don't know if there's anything else I can do to get better speeds. Live in DC, btw...
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my SPH-D710, running Blu Kuban FE10

Its Sprint, my speeds range from blazing fast 3 and 4g to the speed of smell. Late night is often the best speeds. Try updating profile and prl after changing roms. It helps especially if you flash a lot. Also that app is sometimes slow, the speakeasy speed test is often more accurate.

Try flashing the EK02 modem as an experiment and retest your speed test.

I wish I could flash EK02 modem. I have Blu Kuban ICS FE10 ROM, & the earliest modem I can install is FB15. I reverted back to FD02, so I will see how that acts. Here's hoping...

Why can you only go back to fb15? Any modem is compatible with GB or ics.
Sent from my SPH-D710 using XDA

This ROM has a built-in updater & the earliest modem is FB15. I've been looking for EK02 download link that works, but that's like looking for gold at the end of the rainbow
Can sumbody post a link & help a sista out?!? Much appreciated
MY E4GT runs Blu Kuban FE10 1.0.3.3
(ONLY on Wi-Fi)

ronnie771 said:
This ROM has a built-in updater & the earliest modem is FB15. I've been looking for EK02 download link that works, but that's like looking for gold at the end of the rainbow
Can sumbody post a link & help a sista out?!? Much appreciated
MY E4GT runs Blu Kuban FE10 1.0.3.3
(ONLY on Wi-Fi)
Click to expand...
Click to collapse
Calkulin keeps most of the modems (missing a few of the latest ones) on his OP, both CWM & Odin versions:
http://forum.xda-developers.com/showthread.php?t=1332837
Edit: I know this is his GB thread but, like one of the previous posters stated, Modems/Radios are not rom dependent.

tdunham said:
Calkulin keeps most of the modems (missing a few of the latest ones) on his OP, both CWM & Odin versions:
http://forum.xda-developers.com/showthread.php?t=1332837
Edit: I know this is his GB thread but, like one of the previous posters stated, Modems/Radios are not rom dependent.
Click to expand...
Click to collapse
Thannk u, thank u, thank u! But EK02 wasn't working 4 me either (actually WORSE than FE16), so I just flashed back to EL29 modem (unable to upload screenshots now for SOME reason). I'll just leave it like it is until the OTA comes out (if ever!). Thank you for the modem thread...I bookmarked it just in case I get bored again ) & thank y'all for y'alls help

[OTA UPDATE] URL to SS-I747UCLALEM-to-ALG1-SPE

Not sure it'll be much help but here is the url for the latest OTA from att.
https://xdm.wireless.att.com:443/agents/10922/1488/SS-I747UCALEM-to-ALG1-SPE
Appears by the file header you can just save page as zip and you can view the contents of the update on your phone.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2

it is a 'stock recovery' flashable zip. and with all zip files, yes it is viewable on the phone.
its mostly full of patch files. and patches around 200 files. 178 of those are system apks getting patched... largest patches going to samsungservice, flipboard, polaris , clock package, browser, and datataduh!!! googlequicksearchbar.apk ***removing universal search i would be guessing... for anyone that keeps up on the apple/nexus debacle..

I put this on the SD card (btw i was stock non rooted) went into recovery and ran it.. i lost all my files smh! it was a ten mb file .. wth?

it wiped the system. only takes a line of code. dont matter how big the file is..

grkmaster said:
I put this on the SD card (btw i was stock non rooted) went into recovery and ran it.. i lost all my files smh! it was a ten mb file .. wth?
Click to expand...
Click to collapse
I did not lost even one app, olny root but use VooDoo OTA and restore my root with no problem.

any way to get a CW flashable of the Radio.. I want and WILL keep the search :finger: to Apple! Rotten fruit!

I'm working on the flashable radios now
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2

c0ns0le said:
I'm working on the flashable radios now
Click to expand...
Click to collapse
There's a flashable radio at the bottom of the OP in this thread: http://forum.xda-developers.com/showthread.php?t=1768826

TRusselo said:
it is a 'stock recovery' flashable zip. and with all zip files, yes it is viewable on the phone.
its mostly full of patch files. and patches around 200 files. 178 of those are system apks getting patched... largest patches going to samsungservice, flipboard, polaris , clock package, browser, and datataduh!!! googlequicksearchbar.apk ***removing universal search i would be guessing... for anyone that keeps up on the apple/nexus debacle..
Click to expand...
Click to collapse
Nice to see you here TRusselo. I take that you own a SGS3 now (with Rogers?). When can we see you amazing ROMs for SGS3? Much appreciated your work you did on Captivate.

After installing CWM my ota updates fail do I need stock recovery to ota through normal phone process?? I have been able to retain root by using OTA Rootkeeper but I had not yet installed CWM and am concerned about the next update. Thanks for any advice.
2992

McAwesome said:
After installing CWM my ota updates fail do I need stock recovery to ota through normal phone process?? I have been able to retain root by using OTA Rootkeeper but I had not yet installed CWM and am concerned about the next update. Thanks for any advice.
2992
Click to expand...
Click to collapse
Yes you need stock recovery for the ota to work. Or just find a flashable zip of the update somewhere around here :thumbup:
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2

jroyalty7 said:
Yes you need stock recovery for the ota to work. Or just find a flashable zip of the update somewhere around here :thumbup:
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1768826

drothenberger said:
http://forum.xda-developers.com/showthread.php?t=1768826
Click to expand...
Click to collapse
And your just the guy I was thinking of just couldn't remember. Think I might try your zip out myself did you have any noticeable improvements with the updated radio? Thanks again for the zip and link!
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2

jroyalty7 said:
And your just the guy I was thinking of just couldn't remember. Think I might try your zip out myself did you have any noticeable improvements with the updated radio? Thanks again for the zip and link!
Click to expand...
Click to collapse
I haven't, but I work from home and am on wifi most of the time. One person reported that calls were being dropped when switching between two calls (call waiting) using the LEM modem but that was fixed with the LG1 modem. Another person reported in the OTA thread better performance with the new modem.
Give it a shot. You can always go back to the LEM modem if you want.
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2

Does anyone have a CWM Flashable version of the T999VVLDLL1 Jelly Bean Modem?

As you all know, the T999V variants and T999 can not flash the radio/modem files interchangeably between the two.
As such, does anyone have a copy of the Modem? I'm currently running an JB Rom with an ICS Modem and getting some really sad speeds. I checked the Sticky here:
http://forum.xda-developers.com/showthread.php?t=1880987
and it is currently not posted.
If anyone is using this Modem, I believe you could follow the steps in this guide to a certain extent:
http://forum.xda-developers.com/showthread.php?p=27584839#post27584839
Thanks in advance to all that reply!

after further googling, I think all I need is some kind soul to extract the modem.bin from their phones. Afterwards, I think I have enough tech savvy to repackage the Modem.bin into a CWM ZIP file for public consumption.
Please follow the steps using either ADB or Terminal on your phone to extract the modem and then post it here. Thank you!
Requirements:
1. CWM Recovery & root (Thanks Chainfire!)
2. ADB setup and know how to use it! or Terminal Emulator app
3. Samsung KIES drivers installed
4. Power on device, Enable USB debugging
**If you don’t how to do above, then XDA forum search and Google is your friend**
Steps:
1. Dump your current modem onto your internal sdcard
# Run Terminal Emulator app and input steps b -> e
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
OR
# Connect USB to PC & run PC Command Prompt (CMD) & input steps a -> e
a) adb shell
b) su
c) dd if=/dev/block/mmcblk0p7 of=/sdcard/modem.bin bs=4096
d) exit
e) exit

Nobody sent me anything, so I extracted the modem.bin file from a root66 kies odin file:
http://forum.xda-developers.com/showthread.php?t=1771687
then I created this zip file using information from this thread:
http://forum.xda-developers.com/showthread.php?t=1880987
and now...
here's the modem:
https://anonfiles.com/file/bb0622d45bd00877b80bc18ab8802ef5
Cheers!

MegaMan X said:
Nobody sent me anything, so I extracted the modem.bin file from a root66 kies odin file:
http://forum.xda-developers.com/showthread.php?t=1771687
then I created this zip file using information from this thread:
http://forum.xda-developers.com/showthread.php?t=1880987
and now...
here's the modem:
https://anonfiles.com/file/bb0622d45bd00877b80bc18ab8802ef5
Cheers!
Click to expand...
Click to collapse
Just wanted to say thanks for doing this. I offered a month ago to do this for the thread if someone could help me figure out how to export the modem and I see you just sat down and figured it out. Thanks for the taking the time to do this, Support Canada! T999V forever!

How does this compare to VLLH2 in terms of battery life and performance?
Sent from my Nexus 7 using Tapatalk HD

DgtHorse said:
How does this compare to VLLH2 in terms of battery life and performance?
Sent from my Nexus 7 using Tapatalk HD
Click to expand...
Click to collapse
For me it's the same as the previous version. Maybe better signal if you are far from the tower.

Anyone know why does the updater script and radio file still say VLLH2 for the baseband file name? I'm assuming that it is just a left-over from reusing the packaging from the previous baseband zip.
Has anyone tried this and confirmed that it is truly VLDLL1 via the About/Phone menu?
File sizes are different -- new version is quite a bit smaller...so they are not identical...

I'm getting mixed inputs here. I have a t999 T-Mobile Galaxy S III and every time I update my Cyanogenmod ROM (which I've been doing for years) everything goes smooth but when the device boots up, it says "unknown" for the baseband version. If I flash the UVDMD5 radio it goes back to normal. But every single time I flash a new nightly this happens. Just wondering if this is a fix for that or if there I no fix. I rooted with the stock root injected .tar file just like I've done 3 separate times. This is the only one of my 3 S3's that has done this. I confirmed that it was NOT a t999L model before anything. Is there a possibility that this device could be a non t999 without saying it is? Or is it possible that this is a t999L model without showing that it is? I'm very lost here. Nobody seems to have the same issue as me. I've searched through hundreds of thread pages to no avail. Help please somebody?

I've no idea why it would do that. Sounds like some sort of Rom issue maybe? If it was anything but a T999, the md5 modem would not work btw. But I've never heard of thus before, so it could be some sort of unknown corruption somewhere in another partition. Purely a guess on that though.
If you Odin back to the LJA, or any other build does it still do this? Does it happen when you flash any Rom? Or just cm? If it's only cm, then I'd ask in the Rom thread. What about other kinds of flashes, such as kernels, recoveries and mods?
Sent from my SCH-I535 using Tapatalk 4