[Q] Optimized Shift & Incredikernel 2.6.32.27 - Droid Incredible Q&A, Help & Troubleshooting

I'm running Optimized Shift 2.59 and tried flashing incredikernel 2.6.32.27. Everything looked great, but none of the hard keys worked (home/menu/back/search). A quick search in the dev area found one post with a similar problem, but no resolution. Anyone know if this is a common problem?
Thanks.

Sounds like you downloaded the wrong kernel.
EDIT: I just checked and you did get the wrong kernel you need the gingertiny kernel (sense), not the incredikernel (aosp). http://www.incredikernel.com/wp-con...d.php?id=2.6.35.13-gingertiny-v2-12012011.zip
It actually reccomends this kernel in the roms seccond post.

To add to previous post that kernel should work on froyo sense but this is a gingerbread sense ROM. Sense compatibility is not broken until incredikernel hit 2.6.37.
Sent from my ADR6300 using Tapatalk

Related

[Q] Kernels for HTC EVO

I'm new to kernel flashing. I have been playing around with snap and kings kernel. I don't have a problem flashing snap, but once I have it installed it works fine for awhile, but then it reboots itself or goes into a state where it won't turn on and I have to pull the battery. I tried 7.6 both bfs and cfs and the same thing happens. I also tried 7.5 but once I flashed it nothing showed up in the apps to install.
For kings kernel I flashed it and it booted up fine but it seemed to freeze up and I couldn't unlock my phone after the boot.
Am I doing something wrong when I am flashing these? I am running the nightlies of cyanogen. Also, What are some other kernels that work well with cm?
Thanks!!!
Kernals seem to be a taste for the phone itself and not the rom...
My Evo doesnt seem to like any other kernals than stock I have tried many rom/kernal combos and the only way i get no issues and best battery is to run stock kernal
I ran fresh with netarchy and kings like some others-that had great battery and mine just drained fast so I am done with the kernal swapping for now and jut keep playing with roms.... Trying out Virusrom right now not bad so far
Try wiping the cache and dalvik cache before flashing the new kernels. That might help.
Another thing that might help is posting this in the right section. More people with the knowledge and good insight that you need will be more apt to answer you in the Q&A section.
I've tried clearing everything including data but it still would self reboot
the snap kernels do not work with the recent versions (nightlies) of CM.
The framework has been redone, and you will freeze.
You have to use the stock kernel.
Ziggy just made an AOSP kernel, but its buggy.
Toast has a .35 kernel that works good on the new frame work.
I just was able to use a different kernel of kings. It really doesn't enhance quadrant scores, but im want to see what it does to the battery. Where can I download toast.
Also, I noticed that now my unlock screen is different from my wall paper. Is that a kernel issue?
Check to make sure SetCPU is disabled (or any other overclocking utility), and wipe your cache/dalvik. If all else fails, go with the Snap 7.6 failsafe method.
Kings AOSP #1 has worked best for me using cm nightlies. I have easily doubled my battery life. Has anybody else had success with any other kernels? Is toast an AOSP kernel?
as TheJoker and drmacinyasha commented...
snap and king use the .32 kernel. snap http://forum.xda-developers.com/showthread.php?t=733099
cm6 nightly is currently using .34 kernel
Toast has a .35 test1 kernel available for CM6 (http://forum.xda-developers.com/showthread.php?t=735596)
ziggy has a kernel as well. (http://forum.xda-developers.com/showthread.php?t=819402)
zendroid has a kernel - http://forum.xda-developers.com/showthread.php?t=831021
turn off setcpu until after you reboot with the new kernel. don't forget to read the kernel threads OP for possible hints on setcpu configs (ie: snap7.6 works well with conservative governor)
yes they are all AOSP.
i would not advise a newbie to play with the snap or king kernels until the .35 revisions have been released. this is due to changes in the Framework.apk file. you are likely to find that a current CM6nightly w/ the snap7.6 kernel = no bluetooth. new kernels should be hitting shelves very soon. personally, i'm looking forward to loading up the snap kernel once its done cooking, i really liked that kernel.
most are just fine with the stock kernel
many have commented positively on the toast test1 kernel (aside from a hang issue at startup)
ziggy & zen have a bit of work to do on their kernels it seems.
once .35 is 'done' you'll find a bunch of movement on the the kernel threads.
DraginMagik said:
as TheJoker and drmacinyasha commented...
snap and king use the .32 kernel. snap http://forum.xda-developers.com/showthread.php?t=733099
cm6 nightly is currently using .34 kernel
Toast has a .35 test1 kernel available for CM6 (http://forum.xda-developers.com/showthread.php?t=735596)
ziggy has a kernel as well. (http://forum.xda-developers.com/showthread.php?t=819402)
zendroid has a kernel - http://forum.xda-developers.com/showthread.php?t=831021
turn off setcpu until after you reboot with the new kernel. don't forget to read the kernel threads OP for possible hints on setcpu configs (ie: snap7.6 works well with conservative governor)
yes they are all AOSP.
i would not advise a newbie to play with the snap or king kernels until the .35 revisions have been released. this is due to changes in the Framework.apk file. you are likely to find that a current CM6nightly w/ the snap7.6 kernel = no bluetooth. new kernels should be hitting shelves very soon. personally, i'm looking forward to loading up the snap kernel once its done cooking, i really liked that kernel.
most are just fine with the stock kernel
many have commented positively on the toast test1 kernel (aside from a hang issue at startup)
ziggy & zen have a bit of work to do on their kernels it seems.
once .35 is 'done' you'll find a bunch of movement on the the kernel threads.
Click to expand...
Click to collapse
Thanks! this really helped. This may be a dumb question, but where do you find out what kernel runs with the ROMS. eg .35
I really want to find a good combination that gives me good battery life and performance. so will snap 7.6 work with cm 6.1 rc 1 rom?
I saw for CM6.1 the stock kernel is the best. I have gotten the best performance, battery life, and bug free with the stock kernel.
Snap 7.6 would get stuck on the splash screen and required several battery pulls.
Toast .35 works good, but after about an hour or two for some reason it brings my fps cap down to 37, so all my scrolling and games run like ****.
Wait for Snap 9 or the official toast .35 kernel. Stock is just fine.
I was bored last night and tried cm 6.1 with snap 7.6 just for fun, but it seems to be working fine. The boot was quick too, it was on the cyanogen boot image for about 3 seconds before it started up. Quadrant scores are in the mid 2000s. No problems with anything else so far.
Is there a snap website or channel log? I can only fined directories.

0004 Harware what roms are best

I read somewhere that the 0004 hardware phones have a different camera in them that does not work with some roms. I am looking into rooting soon, possibly today if I can get it to work, if not I will wait for unrevoked's update, I am just wondering what roms work with the camera or at least have a fix.
I really don't need or use sense, but that was when I was on the hero and sense bogged down the phone greatly. I just want a fast performing rom that has themes available and tweaks available.
Thanks for your help!!!
Myn RLS4 works flawlessly
Swyped from Eva running Myn's RLS4 on the Now Network!
It also has a lot of themes añd tweaks in the themes/apps section
Swyped from Eva running Myn's RLS4 on the Now Network!
stricklerjosh said:
I read somewhere that the 0004 hardware phones have a different camera in them that does not work with some roms. I am looking into rooting soon, possibly today if I can get it to work, if not I will wait for unrevoked's update, I am just wondering what roms work with the camera or at least have a fix.
I really don't need or use sense, but that was when I was on the hero and sense bogged down the phone greatly. I just want a fast performing rom that has themes available and tweaks available.
Thanks for your help!!!
Click to expand...
Click to collapse
It is not the ROM that causes the problem. You can use any Rom you want to but if you want the camera to work you can not use custom kernals. The only ones I know for sure that support the new camera are HYC #15 and #17
15 is actually the newer kernal released with the 3.70 OTA
This applies to later model 003 phones like mine also. It's a real bummer. I'd love to use one of the battery saving kernels, but my camera won't work with any of them. I wish someone would put the mods in the newest #15 kernel...
I say try different kernels and see what works for your Evo. Make sure u do a nand backup first. I personally have an 004 Evo and i have tried various roms and kernels and i havent had an issue yet (besides an occasional reboots) but my camera/camcorder works great....i have used ava v10, myn's 2.2 rsl4 and currently culkins....i have used ziggys, and net's various kernels with no issue either
The ROM's not the problem. I can run any ROM, as long as I replace the kernel with #15 or #17. So far none of the newer modified kernels will work with my camera.
Sent from my PC36100 using XDA App

[Q] Kernels?

Ok... can someone please tell me what HAVS, CFS and SVS means?
HAVS - no idea
CFS - http://en.wikipedia.org/wiki/Completely_Fair_Scheduler
SVS - no idea
lol... i guess google is my friend
HAVS (Hybrid Adaptive Voltage Scaling) What this does is provide SUPERIOR BATTERY
Really? Anyone else use these kernels? Whats the risk, is it risky like flashing a Radio?
KevAmiga said:
lol... i guess google is my friend
HAVS (Hybrid Adaptive Voltage Scaling) What this does is provide SUPERIOR BATTERY
Really? Anyone else use these kernels? Whats the risk, is it risky like flashing a Radio?
Click to expand...
Click to collapse
No, only thing is some undervolted kennels might not be stable so always nandroid before changing kernel.
Sent from my HTC Desire using XDA App
Brill - I have some Nandroid backups, so if anything goes wrong the recovery will still work, and I can restore... excellent. Thought so
AOSP Kernel for SENSE ROM?
http://forum.xda-developers.com/wiki/index.php?title=FAQ#Kernel
here's a link with "all" neccesary informations
--------------------------------------------------------------
i would like to add a new question in this thread:
is it possible to use an AOSP Kernel like: http://forum.xda-developers.com/showthread.php?t=893484
with my SENSE-ROM ? (currently using ReflexTSense http://forum.xda-developers.com/showthread.php?t=791315 )
thx
No, at least I know that way. You have to use a Sense kernel with a sense ROM, like this to run without problems.
so there's no option to use newer Kernels with Sense-ROM's ..
thx for the information
Sorry to break into your thread, but does it work the other way round? I mean, is it possible to use a Sense kernel with an AOSP rom?
sense with asop and the other way
i tride som ASOP Kernel with my SensHD Rom and it worked "booting
i found a flickerning screen but it worked; i refalashed a sense kernel
i think that the other "Way" should also work with some "issues"
greetings..
ps: i somewhere on thos forum found a discussion between two ROM-Programmers about using ASOP Kernel in Sense roms.
As far as i remember they both found the conclusion that sense-kernel are using differetn Graphicdrivers so that a asop kernel never will run "full" with a sense-rom but the ASOP Kernel COULD be modded in "future"

Best kernel for lou's Senseless

Hi, Currently running Sense(less) rEVOlution 2.0 with Kernel #4, is there a better kernel for better battery life? I like this combo very much but I think the battery could be better
Also looking for a true senseless, AOSP gingerbread rom with gapps included, or at least flashable, any suggestions?
Thanks
Try lous #8....closest thing to whst ur talkin about would b skyraider athena, that and the other 5 gingerbread roms in development
Sent from my ADR6300 using XDA App
If you haven't tried chad's incredikernel:
http://chad0989.dyndns.org/2.6.32.27-incredikernel-12232010-plus25v.zip
then I suggest you give it a go.
Use it without setCPU, at least at first. It has one built in so you really don't need one, if you find it too sluggish or you think you can set it better then put it on after you gave the whole Kernel a good run without it.
I find this Kernel very fast and the best for battery life that I've tried.
paboater76 said:
Also looking for a true senseless, AOSP gingerbread rom with gapps included, or at least flashable, any suggestions?
Click to expand...
Click to collapse
Not many of those. Really CM7 is the only one I've found worthy of flashing.
Try the RC1
(If you go with AOSP then you will need a different kernel than listed above)
Thanks guys for the replies.
I will try #8 tonight, also on chad's Kernels I have read the same and will be trying that one as well. I'm really liking Senseless 2.0 with Launcher pro Plus
Yeah I understand that with a sense rom you have to have a sense Kernel and with AOSP rom an AOSP kernel. Question though. IF i did decide to try and AOSP ROM, that AOSP rom should/would come with a new Kernel right? Just don't flash Lou's stuff/sense kernel after that.. only flash another AOSP Kernel. Is that right?
I have the Droidx so this Kernel stuff is new to me lol.. still learning.
paboater76 said:
Thanks guys for the replies.
I will try #8 tonight, also on chad's Kernels I have read the same and will be trying that one as well. I'm really liking Senseless 2.0 with Launcher pro Plus
Yeah I understand that with a sense rom you have to have a sense Kernel and with AOSP rom an AOSP kernel. Question though. IF i did decide to try and AOSP ROM, that AOSP rom should/would come with a new Kernel right? Just don't flash Lou's stuff/sense kernel after that.. only flash another AOSP Kernel. Is that right?
I have the Droidx so this Kernel stuff is new to me lol.. still learning.
Click to expand...
Click to collapse
You got it Most/all ROMs for the Inc come with a kernel included. I personally like the one CM7 RC1 comes with, gives me great battery life
Ziggy's 12111 beta
If I flash to incredikernel from Lou's #4 I just need to wide delvic cache correct?

[Q] Kernels?

I just flashed koni's elite II rom (which is awesome) and i want a really fast kernel that's compatible, any suggestions?
any sense kernel. try a few. when i was on sense, i either used netarchy's newest cfs version, or one of ziggy's beta kernels (www.ziggy471.com). i also like calkulin's modded htc 15 kernel. try cyanogenmod nightly 7 stock kernel is new and beast. or try savagezen on aosp.
Thanks man
no problem
I wouldn't have advised him to use and AOSP kernel on a Sense rom.
teh roxxorz said:
I wouldn't have advised him to use and AOSP kernel on a Sense rom.
Click to expand...
Click to collapse
i didnt.
" try cyanogenmod nightly 7 stock kernel is new and beast. or try savagezen on aosp."
i'd say thats clear enough. you can mock me for being wrong when he flashes savagezen over myns (which would totally be worth the pictures of fail that people would post btw)

Categories

Resources