Develop Bugs

Question about firmware update ...

I'm new to Bada OS, and I want to update my Phone and in the same time to unbrand it ....
I have an Samsung S8500 and it is braded Vodafone and it is Bada 1.0 ...
I want to upgrede it to 1.2 and in same time to unbrand it ....
I've found the tutorial and the firmwares here http://badawaveapps.blogspot.com/2010/12/flashing-samsung-wave.html but i Don't know what version to flash ... I live in Romania (Europe) so S8500XEKC2 is good ?
Also, the spoof method from here http://badawaveapps.blogspot.com/2011/02/now-spoof-apps-in-official-bada-12-or.html will still work ?

you should flash your phone with xxjk1 ,it is the latest europian firmware which allows you to sp**f apps from menu and it is also bada 1,2 so you get swype too. .

Thank you. This is what I wanted to know.

[Q] help required:S8500XXJL2 to S8500DDJI2

Hi ,
I am in india and my wave s8500 is from UK, i done a full download of S8500XXJL2 from Vodafone firmware. Everything working except the GPS. I tried all the posibilities which are out in many bada forums.
And finally planned to flash indian firmware and have below questions.
1/ Is it ok to move from S8500XXJL2 to DDJI2 since my phone is from UK.
2/ since full DDJI2 is not available, should i flash as follows?
DDJE7(FULL)-->--->DDJI2(PARTIAL).
If so, is it ok to move from S8500XXJL2 to DDJE7..?
Any additional inputs are welcome. Thanks in advance to everyone out here.

flash straight to
S8500DDKD1 ## 1.2 2011 April DOWNLOAD
it is full latest indian firmware

thanks. is it ok to flash Indian version on UK phone..?
waveboy said:
flash straight to
S8500DDKD1 ## 1.2 2011 April
it is full latest indian firmware
Click to expand...
Click to collapse
Hi,
Thanks for the update. Just few clarifications.
1/ is it ok to flash India Firmware version on UK phone.
2/ Is this includes SHP and my GPS will properly..?
Thanks again.

FW Update treu Kies

First of al sorry for my bad english, i'm from the netherlands and have some problems with Kies and my Wave (s8500)
I have done some FW from samfirmware.com and that was working perfect. i install bada 2.0 beta from that website and was perfect, only battery leak bud oké.
but because bada 2.0 will come out OFW soon i had my wave back to bada 1.2 (s8500XXJID) but know when i open KIES there is a sign there is no fw update.. but there really is i know that for sure.
please help me.

You need to install CSC from your region but i dont know which is,look at the samfirmware

mx80000 said:
You need to install CSC from your region but i dont know which is,look at the samfirmware
Click to expand...
Click to collapse
and where to look. the only download's i can find are full fw pack

Ask someone from your country which FW he has and look for that FW on samfirmware or here mysamsungwave.com/index.php?topic=10277.0

you remember u r old fw 1.2 version?
if u are then download it from samfirmware and just change csc to u r region..
and u can ask other guys who hav same wave and not flashed or he updated with kies latest fw..
[sorry for my bad english]

For Netherlands, download any firmware with the XEN csc.
After flashing, make sure you install the correct csc in pre-Configuration setting.
Then connect to kies to upgrade to the latest version.
Best of luck.
NB: If you cannot find the latest firmware with XEN,
download this S8500XXJF4_Full_PRO with XEN csc (original from Samsung) and flash with it.
Then use kies to upgrade to latest version.

THANK YOU
i think i should thank you very much for you can waste lot of time to write this post .....thank you again for your sharing..
_________________________________________________________________
I live my life in colour and see in soundMake sure you are heard!
Coach outletCoach Handbagscoach factory outlet

Relax bro,
I had some family troubles. But it's working nice. thnks spacks for you're kindnes.

BADA Firmware S8500XIKG1 Ufficial

BADA Firmware S8500XIKG1 Ufficial
Bada 1.2 S8500XIKG1 Ufficial 2011
[down]
http://dl.dropbox.com/u/12819503/Firmware/S8500XIKG1.rar
[/down]

DevilM said:
BADA Firmware S8500XIKG1 Ufficial
http://dl.dropbox.com/u/12819503/Firmware/S8500XIKG1.rar
Click to expand...
Click to collapse
Legit or fake?
XI = ?
K = 2011
G = July
1 = Rev 1
Or am I missing something to the normal convention?
And its only 160mb .... ?

it is not fake
XI is for italian FWs
160 mb only because it is a kies FW update , not a full FW
you can see it in pscoy's topic in the other forum section
Best Regards

mylove90 said:
it is not fake
XI is for italian FWs
160 mb only because it is a kies FW update , not a full FW
you can see it in pscoy's topic in the other forum section
Best Regards
Click to expand...
Click to collapse
So Italy already has a official 2.0 bada ?
Is that what your saying?

This is an old firmware, July 2011 bada 1.2.
I wonder why it's coming up now, when there are August/September Firmware for bada 1.2 for Europe (XXKF3).
Or maybe, this is a specialized/localized firmware for only Italy. All the same, it's a July bada 1.2 firmware. And not bada 2.0.

spacks said:
This is an old firmware, July 201,1 bada 1.2.
I wonder why it's coming up now, when there are August/September Firmware for bada 1.2 for Europe (XXKF3).
Or maybe, this is a specialized/localized firmware for only Italy. All the same, it's a July bada 1.2 firmware. And not bada 2.0.
Click to expand...
Click to collapse
Thanks for clarifying .. i was beginning to wonder wtf ...
That's why I thought it was 2.0 because posting a old 1.2 is weird

Things I do not know, I ask you XD
What changes from previous versions?
which bugs are fixed?
lite would be the last official release for 1.2 bay?
even though I am fine with 2.0 I can not find a bay way to get a good pdf sygic and XD ...
so if you have resolved the error memory is only 70MB of memory with error
f or a little thought we might not? ...
But I find it really nice bay 2.0: P there is nothing to spoof?

[Q] flashing different region firmware

Hi can somebody suggest how I can change to a different region firmware for my S8500 and after doing so, can I still be able to get the official updates.
thanks, I am on bada 1.2 now