Need help !!! if not thanks ,i brick my phone . try to flash a rom and kernel. (custom) it wo'nt turn on or charge.Its a Se xperia play R800x.
I tried recoveryPLAY flash;FlashTool_0.2.9.1h .Please help!
1.
You allways should use the newest flash tool !
http://androxyde.github.com/Flashtool/
Which Kernel / Rom did you flash ?
- in which order ?
2.
Can you still get it in Fastboot mode ?
Hold down the search button while connecting it to your PC, the notification led should turn BLUE !
IF so you just could reflash it.
3.
How about you would try out the normal fastboot flash ?
-fastboot package: http://www.multiupload.com/BMJ24IL6XY
-32/64bit drivers: http://www.multiupload.com/0XZV1LXRVA
Click to expand...
Click to collapse
1 FreeXperia Project
2 No
Is there alway to reset my phone!
Related
Hi
I have an experia ARC s, with doomlord kernerl and CM7.2. I want to update to as it is now a stable RC. However it will not go into flash mode..
If i disconnect and reconnect with back button held and turn the phone on it only goes into fastboot..
Anyone know a way that I can flash a new baseband for the CM9? Essentially I want to:
- flash baseband flashtool
- update kernerl (fastboot)
- fastboot CM9 freexperia..
I have all the files, just cant flash the baseband.. any ideas?
Ty flashing the CM kernel instead and try again.
XperienceD said:
Ty flashing the CM kernel instead and try again.
Click to expand...
Click to collapse
I solved it through downloading everything again... did a factory reset ... and it would enter flash mode again..
weird..
hey guys , i have Xperia Arcs device , and i was working on CM10 and everything was going great but i wanted to upgrade and install CM10.1
from here here the first thing i've done is flashing the last SONY Official Firmwares(4.1.B.0.587) as mensioned in the post
after that i tried to power on the device but it's stuck on the sony beginning screen and that's it .. nothing happening just keep flashing the sony screen .. i can't access to clockmode or fastboot or anything
please help
SHIKOSHAKUR said:
hey guys , i have Xperia Arcs device , and i was working on CM10 and everything was going great but i wanted to upgrade and install CM10.1
from here here the first thing i've done is flashing the last SONY Official Firmwares(4.1.B.0.587) as mensioned in the post
after that i tried to power on the device but it's stuck on the sony beginning screen and that's it .. nothing happening just keep flashing the sony screen .. i can't access to clockmode or fastboot or anything
please help
Click to expand...
Click to collapse
try to flash another kernel which supports ICS
GeoTox said:
try to flash another kernel which supports ICS
Click to expand...
Click to collapse
i tried to flash and older kernel but it still reboot . i guess i need to flash the kernel of cm10 that i was working on before i flashed (4.1.B.0.587) but i don't know what kernel to flash
Re-flash original Arc S .587 TFT through Flashtool. It should work !
For an ICS-based kernel, you can try Lupus v16 (with CWM included).
xdlol123321 said:
Re-flash original Arc S .587 TFT through Flashtool. It should work !
For an ICS-based kernel, you can try Lupus v16 (with CWM included).
Click to expand...
Click to collapse
the first thing i did is flashing the original Arc S .587 TFT then the phone goes to reboot loop
so how can i flash .img file while my phone can't start or go into fastboot mode !
SHIKOSHAKUR said:
the first thing i did is flashing the original Arc S .587 TFT then the phone goes to reboot loop
so how can i flash .img file while my phone can't start or go into fastboot mode !
Click to expand...
Click to collapse
Boot your phone keeping the menu button. You'll enter fastboot mod, then connect it to your PC with Flashtool opened and flash the .img file.
Hope I helped you !
xdlol123321 said:
Boot your phone keeping the menu button. You'll enter fastboot mod, then connect it to your PC with Flashtool opened and flash the .img file.
Hope I helped you !
Click to expand...
Click to collapse
i did but nothing happening the led color is green and don't change to blue
and i tried all these kernels and no one working https://www.wuala.com/CMX10-Android/Android/CM10/Kernel
03/036/2013 16:36:07 - ERROR - ERR_SEVERITY="MAJOR";ERR_CLASS="SECURITY_CLASS";ERR_DYNAMIC="SIN header verification failed"
03/036/2013 16:36:07 - ERROR - Error flashing. Aborted
all gave me the same error
Hello Guys , this is my first post in here
I've just downloaded the 'Xperia Ultimate HD' rom v.4.0 and wanted to instal it on my xperia arc s
I do a factory reset in recovery mode and wiped cach , and because of my stupidity i forgot to wipe software:crying:
When i reobeted the device it freezes on the SONY logo and doesn't continue
I tried to connect the device to my PC via USB but nothing happend at all
the computer didn't see any thing
so what can i do now!! please help
Did you install a custom kernel? Or if you habe recovery installed? If so you can just boot back to recovery and start over.
Actually the phone can't load to recovery
izuall187 said:
Did you install a custom kernel? Or if you habe recovery installed? If so you can just boot back to recovery and start over.
Click to expand...
Click to collapse
Often when i instal a new rom the recovery is removed
I have to reinstall new recovery from Xparts
Flash your stock firmware via flashtool.... Then start over
Xparts is temp solution to Cwm
If you don't wanna lose recovery unlock your bootloader and flash a custom kernel
Don't worry it can be easily fixable ..
If your BL is locked then do this ! :
Turn off phone (pull the battery out then take back)
Install PC comanion softwer to your computer
When it is installed then select software repair
When it say connect phone the do this :
Hold the back button while you plug the usb cabel in !
Then follow the instructions in the PC companion than you finished !
If it is not work try to do with flashtool SEARCH for a guide there are many for it (for example flashing frimwares with flashtool ) !!
Sorry for my bad english /it is late night for me.. xD
Here a video for PC companion repair : http://www.youtube.com/watch?v=PiaFGbeGOr0
And for flashtool : http://www.youtube.com/watch?v=iNDeiIWrf3Q
And please hit thanks button if i helped !!
Unfortunately my phone has an unlocked bootloader
waseemhamwi said:
Unfortunately my phone has an unlocked bootloader
Click to expand...
Click to collapse
Then use this tool - http://developer.sonymobile.com/2012/12/06/new-flash-tool-from-sony-for-unlocked-xperia-smartphones-video-beta-download/
I think this will work thanks :thumbup:
Help! I tried to repair my sister boot looped xperia M using flash tool with the latest software and it didn't work after being flashed so i flashed it afain and still no luck.. Now the device won't connect to flash mode at all! It shows up as "qhusb_dload" which i know that something bad had happened.. But i can connect into fast boot mode.. So is there any way to revive my sister device? And by the way the device can boot but takes a long time until the Sony logo appears and the it shows a blank screen with white line at the bottom of the screen.. And it goes off.. Please help me if there isn't anyway to revive i still appreciate your answer
well just download sony update service and follow instructions and continue for repair it will download necessary firmware files and fix it
Anmol0022 said:
well just download sony update service and follow instructions and continue for repair it will download necessary firmware files and fix it
Click to expand...
Click to collapse
How? I can't get to flashmode.. Only fastboot.. Will it work with fastboot?
NoobGuY17 said:
How? I can't get to flashmode.. Only fastboot.. Will it work with fastboot?
Click to expand...
Click to collapse
use flash tool again and flash proper ftf file in flashmode if it is not flashing then connect mobile in fastboot mode and blue light will come up then use fastboot mode (click thunder icon then fastboot after light is blue)then select kernel and flash it after that again flash full ftf in flash mode
NoobGuY17 said:
How? I can't get to flashmode.. Only fastboot.. Will it work with fastboot?
Click to expand...
Click to collapse
remove batery after 10 seconds place it. now open flashtool and select correct firmware then flash. it shows preparing device. after 1 min it says to "connect phone in flash mode"
now only you have to connect your phone to pc it's important for bootloop devices.
press and hold volume down + connect usb
phone led turns into green
Anmol0022 said:
use flash tool again and flash proper ftf file in flashmode if it is not flashing then connect mobile in fastboot mode and blue light will come up then use fastboot mode (click thunder icon then fastboot after light is blue)then select kernel and flash it after that again flash full ftf in flash mode
Click to expand...
Click to collapse
I've flashed the kernel using fastboot.. And it shows me failed message when writing boot saying that command doesn't have blablabla.. Is something wrong? Or i have to open flashtool with administrator?
NoobGuY17 said:
I've flashed the kernel using fastboot.. And it shows me failed message when writing boot saying that command doesn't have blablabla.. Is something wrong? Or i have to open flashtool with administrator?
Click to expand...
Click to collapse
well make sure you install drivers for fast boot else it wont work
drivers are in flash tool folder C:\Flashtool\drivers in my case its here if you have used default settings look and install and select fastboot from list when installing
Download any ROM (Best is Cyongen or LiquidSmoooth)
Download a rom and boot your phone into fastboot mode and install .zip file.THAT'S IT :fingers-crossed::fingers-crossed:.Hit thanks button if I helped you
Bro if you have C2004 means I am ready to give my nandroid backup you can easily restore with Cwm no worries about flash mode other model means pls specify model no I will try...
Sent from my C2004 using Tapatalk
well thanks guys for giving me advice.... i've already sent my phone to Sony Service Center to avoid more problems :laugh: anyway thank you guys for helping me
Hello guys, I bought my Z1C and rooted and install dual recovery, before i use DstrikerZ1KaiROM5.0 rom all fine but i wanted flash this rom (Rockz1k built 4.0) i enter into recovery Philztouch, full wipe and flash the rom BUT then open Aroma installer (all fine) here:
1-I select lenguaje
2-Accept terms and conditions
2-Select 42Dpi
3-And i read how i wanted calls UI, i dont select nothing and press back because i prefer 40Dpi
4-Show again how i want Dpi AND...STUCK i press and touch not respond either physical buttoms, wait like 10 minutes and still there, the only way to turn of was pressing the red buttom.
And now when i turn on only show Sony logo and the led never it appears.
I know only need enter into recovery and flash again OR into Fastboot mode and "send" command for enter into recovery but i dont know how :crying: :crying:
Firmware: .157 KitKat
Can some help me please i really really appreciate it!.
RicardoKD said:
Hello guys, I bought my Z1C and rooted and install dual recovery, before i use DstrikerZ1KaiROM5.0 rom all fine but i wanted flash this rom (Rockz1k built 4.0) i enter into recovery Philztouch, full wipe and flash the rom BUT then open Aroma installer (all fine) here:
1-I select lenguaje
2-Accept terms and conditions
2-Select 42Dpi
3-And i read how i wanted calls UI, i dont select nothing and press back because i prefer 40Dpi
4-Show again how i want Dpi AND...STUCK i press and touch not respond either physical buttoms, wait like 10 minutes and still there, the only way to turn of was pressing the red buttom.
And now when i turn on only show Sony logo and the led never it appears.
I know only need enter into recovery and flash again OR into Fastboot mode and "send" command for enter into recovery but i dont know how :crying: :crying:
Firmware: .157 KitKat
Can some help me please i really really appreciate it!.
Click to expand...
Click to collapse
Flash stock rom. ftf with flashtool
How too flash with flashtool
Download the latest flashtool
Extract flashtool and install the drivers in driver folder
Download stock. Ftf file for Xperia z1 compact
Place. Ftf in flashtool/firmware
Load flashtool click on the black lightning blot
Seclect flashmode
Seclect the firmware
Untick data if u want too keep all files
Tick no final verification
Click flash
Wait for a popup to tell you to put your phone in flashmode
Connect phone to pc in flashmode
Thanks
Pakman123 said:
Flash stock rom. ftf with flashtool
Click to expand...
Click to collapse
Yes, thanks for the advice i really really nearly to cry because i have only 1 month with it