MOTOROLA PRO "Official thread" - Please post info on this device here - Upgrading, Modifying and Unlocking

MOTOROLA PRO+ "Temp Forum" - PLEASE POST INFO ON THIS DEVICE HERE
Im hoping not to be contravening any rules here but since there is barely any info on the MOTOROLA PRO+ at the moment (not much info either on its predecessor MOTOROLA (DROID) PRO), I though all little bits of infor around (I have posted a few things in different places) could be gathered in one place - HERE! ...at least until when (and if) a dedicated section is created for this device...
Some posts started/found so far:
04 DEC 2011
http://forum.xda-developers.com/showthread.php?p=19941515#post19941515
http://forum.xda-developers.com/showthread.php?p=19941082#post19941082
http://forum.xda-developers.com/showthread.php?p=19940922#post19940922
http://forum.xda-developers.com/forumdisplay.php?f=832 - Motorola DROID PRO (XT610) only
http://forum.xda-developers.com/showthread.php?p=19282001
http://forum.xda-developers.com/showthread.php?p=19306339
08 DEC 2011
http://www.droidforums.net/forum/mo...rces-thread-sbf-root-update-instructions.html - Motorola DROID PRO (XT610), possibly applicable to our Motorola PRO+ (MB632) too...
http://www.droidforums.net/forum/droid-pro-roms/ -ROMs!!!!!!... BUT, technically for the DROID PRO (XT610) ...not sure if they will work with our PRO+s (MB632)
12 DEC 2011
How to start the Motorola PRO+ (MB632) on the more than basic "built in" recovery:
1. Switch phone off
2. Hold the keypad's "R" key together with the "M" key and press the power button (all simultaneously so: R+M+Pwr) until the Motorola's logo (white Motorola "M" inside red circle) appears - at witch moment you let go of all thre keys
3. wait until the Android "hazard" triangle + the Android "robot" appear, and then:
4. ...press the "volume up" and "volume down" keys at the same time...
5. You will get a very basic 4 option sub-menu consisting of: "reboot system now", "apply update from sd card", wipe data/factory reset" and "wipe cache partition"
You can navigate the above with the volume key and used the "enter" button on the keypad to accept.
...ALSO, if whilst the phone is off you press the "volume down" button and keep it held whilst powering up, you get a very basic menu which contains: "Fastboot", "Enter Qualcomm Flash Mode", "Erase USERDATA", "Power Off" and "Exit (boot Android)" ...what I can figure out is how to select any of these options as I have tried with "enter", the "power" button as well as with other keys on the keypad, and nothing seem to work... I will keep trying see what I get - let me know if you guys figure it out before I do!
13 DEC 2011
Motorola PRO+ (MB632) Emulator (Motorola Official SDK, found by edent): developer.motorola.com/docstools/android-sdk-addons/addons/Motorola_SDK_Add-on_for_Pro_Plus_MB632
17 DEC 2011
PRO+ Developing Project (Founf by boom2k): http://en.sourceforge.jp/projects/sfnet_motoproplus.motorola/

Motorola Pro+ needs a own Forum
i will get the Pro+ in few days, then i can give some intel

Tekkaro said:
Motorola Pro+ needs a own Forum
i will get the Pro+ in few days, then i can give some intel
Click to expand...
Click to collapse
Totally agree... I already placed a request for it yesterday, that's why in the meanwhile I thought it would be good to have this. Fingers crossed!
...getting my PRO+ in a few hours! (prior to 12hGMT according to Fedexs tracking service
Sent from my HTC Vision using xda premium

Got my Motorola PRO+ yesterday! FANTASTIC PHONE!! Totally what I was looking for (...and more...)!!!
Fast, compact but with larger than average display size (for a front physical QWERTY keyboard device), lightweight yet very sturdy, VERY comfortable QWERTY "bar type" keyboard, fantastic display quality, owesome battery life....... (I think Im going to cry! )
...I even "figured" how to root it after trying a few available options out there that didnt work. I will post more on that later (...Im at work right now...!)
***UPDATE***
...so, THIS is "later"! Here is the best and EASIEST way to unlock a MOTOROLA PRO+ (MB632) - I dont know if it also works with MOTOROLA DROID PRO (XT610) - at least for my experience (as all Windows ways I tried didnt work for me! ...maybe is something to do with my "paranoid" strength anti-virus program... ). Yes, you will need to get Ubuntu (Linux) but is free, easy to download/install/use, and you can have it running from an USB stick or installed side by side with your Windows!
ALL CREDITS GO to: CrimsonSentinel13, paxChristo and DooMLoRD's who together, provided me with the way to do it! (please MAKE SURE you visit the following link and THANK THEM if it does work for you!) Said link - below - contains more than one way (Windows, Mac, Linux/Ubuntu, etc.) to get the PRO+ rooted, but since the Windows versions didnt work, and regardless that it would have, I think the Linux/Ubuntu way is MUCH faster and MUCH easier so, here goes "THE WAY" that I used in order to get my PRO+ ROOTED!
LINK TO CrimsonSentinel13/paxChristo post/method: http://forum.xda-developers.com/showthread.php?t=1312859&highlight=rooting
EXTRACT OF paxChristo METHOD FOR LINUX/UBUNTU (The EASIEST WAY OF ROOTING YOUR MOTOROLA PRO+/MB632!):
Originally Posted by paxChristos
If you're doing the script rooting in linux, do these things first
1) Download and unzip file (it's below at dropbox.com or ubuntu one; or it's posted in #1 as an attachment)
2) open up terminal
3) type "su"
4) enter your password
4a) if you don't have su set up
4b) type "passwd"
4c) enter you username password (no, there will be no ***s to show that you entered anything, just hit enter when you've inputted your password)
4d) input a password for root (unix) (no, there will be no ***s to show that you entered anything, just hit enter when you've inputted your password)
4e) type "su" and enter your password
5) navigate to location you unzipped the file to (chrome default download is /home/[your username]/Downloads)
6) type "chmod 755 runme-linux"
7) type "cd files"
8) type "chmod 755 adb"
9) type "cd .."
10) type "./runme-linux"
11) type "exit" x2 to exit terminal
12) enjoy your rooted play!
Here's the script (and all applicable files) (totally ripped off DooMLoRD's code, thank him, please, for me), go to these links:
At dropbox.com: http://db.tt/a4H6QFfV
At Ubuntu one: http://ubuntuone.com/7mD63kpsKzGmaou5hcftBV
NOW, WE ONLY NEED ROMs FOR THE MOTOROLA PRO+ (MB612)

...OH! ...and once rooted, I cant stress it enough: INSTALL THIS FIRST OF ALL!!

I had to sign up to say many thanks for the info SilverLad!
I got my Pro+ 2 weeks ago. I was a BB user before as I love a QWERTY keyboard, however being a bit of a technogeek I was keen to get onto the Android platform but there had been no decent QWERTY phones available.....until this baby popped up!
Being my first Android phone I'm a newbie to rooting/roms/etc and as this phone is new/lesser known, there is a distict lack of information about it around at the moment. Thanks for posting the instructions I shall give it a go.
I hope you keep this thread updated with any new info and details of roms.
Cheers,
Grav.

Hi both
Pls keep us updated on this phone. Its good to read from real users.
Ive used a no of android phones, including moto droid pro and my current moto xprt.
like many i dont care much for moto's implementation of android.
Sony Erricson's is the best. But they dont have a phone type like this - yet.
Enjoy what you have and try to use it as stock, because its not likely if ever a stock ROM will be available for it.
Coming from the previous moto phones i can say that yours is probably the cleanest and least buggy phones...as Moto improved it.
Things to look for in order of importance: battery life, GSM signal, and overall functionality of the phone.
Ideally it should be at least one day with moderate to heavy use, solid H signal most of time (depending on your provider of course), and no random rebooting and bugginess of phone and the like.
Give it a week or 2 and see how it is in real like after you get used to it a bit, and for the phone and battery to 'burn in'.
And keep us updated.
Thanks again
Sent from my MB612 using XDA App

Thank you SilverLad for the information. Just to confirm I managed to root my Pro+ using DooMLoRDs Easy Rooting Toolkit on a Windows 7 machine. The guide and tool to do this can be found on the link provided by SilverLad. Thanks again.

Vote for Motorola Pro+ Forum
everyone should go to: Link and vote +1 for a separate Motorola Pro+ Forum

Tekkaro said:
everyone should go to: Link and vote +1 for a separate Motorola Pro+ Forum
Click to expand...
Click to collapse
Have voted.

GravityTheDon said:
I had to sign up to say many thanks for the info SilverLad!
I got my Pro+ 2 weeks ago. I was a BB user before as I love a QWERTY keyboard, however being a bit of a technogeek I was keen to get onto the Android platform but there had been no decent QWERTY phones available.....until this baby popped up!
Being my first Android phone I'm a newbie to rooting/roms/etc and as this phone is new/lesser known, there is a distict lack of information about it around at the moment. Thanks for posting the instructions I shall give it a go.
I hope you keep this thread updated with any new info and details of roms.
Cheers,
Grav.
Click to expand...
Click to collapse
Thank you very much for your kind words!

kasa7 said:
Thank you SilverLad for the information. Just to confirm I managed to root my Pro+ using DooMLoRDs Easy Rooting Toolkit on a Windows 7 machine. The guide and tool to do this can be found on the link provided by SilverLad. Thanks again.
Click to expand...
Click to collapse
No probs at all! ...I thought so (the Windows way would also work), but really - my "ultra agressive" antivirus does sometimes really annoy me precisely because it stops lots of processes from doing their "job" ...time to buy another computer just for this sort of things! Glad it worked... No we "just" need ROMs!

Tekkaro said:
everyone should go to: Link and vote +1 for a separate Motorola Pro+ Forum
Click to expand...
Click to collapse
"...been there, done that....!" ...last Saturday to be precise... (we really need to "advertise" this - as well as waiting a little... This device is too new, but Im confident (seen how GOOD it is) that soon there will be a lot more PRO+/MB632 owners, and eventually a Dev will even get us a ROM!
My vote (Sat): http://forum.xda-developers.com/showthread.php?p=19940305#post19940305 POST #2879, 3rd December 2011, 12:15 PM
~SilverLad~ said:
+1 for MOTOROLA PRO+ (AKA: MB632, "Elway Plus"), please...
Click to expand...
Click to collapse

MORE INFOR than seems/might be useful (despite originally made for the DROID PRO (XT610): http://www.droidforums.net/forum/motorola-droid-pro/176761-droid-pro-resources-thread-sbf-root-update-instructions.html ...and not only this post but forum/section in general! ...LOTS on Motorola DROID PRO (XT610) and Motorola PRO+ (MB632)!

Info on ROMs!!! ...check post #1 (on this thread - which I will keep updating as "new things" pop up) ...BUT, dont get to excited because this is also meant to be for the DROID PRO (XT610) too....

~SilverLad~ said:
Info on ROMs!!! ...check post #1 (on this thread - which I will keep updating as "new things" pop up) ...BUT, dont get to excited because this is also meant to be for the DROID PRO (XT610) too....
Click to expand...
Click to collapse
Will check the links, guess we don't know right now if those ROMs are compatible or not?

Rooted Pro+
Root method worked perfectly for my motorola pro+.
Massive thanks to SilverLad for post also CrimsonSentinel13 and Doomlord for ZergRush Method.

KingSmiler said:
Root method worked perfectly for my motorola pro+.
Massive thanks to SilverLad for post also CrimsonSentinel13 and Doomlord for ZergRush Method.
Click to expand...
Click to collapse
...dont forget to thank the Devs too though...

GravityTheDon said:
Will check the links, guess we don't know right now if those ROMs are compatible or not?
Click to expand...
Click to collapse
...not really no... I have been trying lots of different recoveries (Bootstrap, Cockwork, 4EXT...) in order to flash the only 2 availabe ROMs for the DROID PRO (XT610) and NOOOOOTHING seems to work!! Im so frustrated... It seems there are some major changes between the DROID PRO (XT610) and the PRO+ (MB632) ...I have gotten to the pont of "brisking it" (risking to brik the phone!) by trying recoveries from the DROID 2 and DROID X.... THANKFULLY, no brick (dont worry guys, Im not such a "chancer" - I tested what I had too before trying on the phone ) but unfortunately nothing works anyway (although these worked with the XT610!)! Im actually VERY frustrated and annoyed to the fact that the XT610 (being a much lesser device) has much more available right now than our MB632......
I have found some "new" things though - the button convination to get to the more than basic "recovery" feature, and to a sort of engineering sub-menu or something (I dont know what it is for, but it doesnt seem to do much) - I will post info on that in a moment...
---
PS: I hope not to "offend" anyone but since Im Catalan (or Catalonian - depending on whether you check the Oxford Dictionary or the Webster ), and born in Barcelona, I must reflect the result of yesterday's "El Clasico" (football/soccer): Real Madrid 1 - 3 FC Barcelona (aka: THE BEST Team in the WORLD! )
"VISCA EL BARCAAAAAAAA!!!!!!!!" ...Champions League, here we comeeee! (...yet again and for the third year in a row.... )

...OK so, as I was saying above, I have just update post #1 with the "menus" info... Check it out...

Related

De-brand your Orange / T-Mo etc. device via nandroid!

I posted a virgin, generic nandroid backup and instructions on how to restore it here:
http://android.modaco.com/content/h...and-your-orange-t-mo-etc-device-via-nandroid/
Enjoy!
P
other than the obvious benefits of doiing this will it also remove the t-mobile splashes?
Well, this version seems more stable than the stock Orange rom....
for example, when in the compose sms section, when typing someones name in...rather than doing "correction" style numbers, it actually has a drop-down list with names and numbers.
Seems faster, overall, and nice to have standard set of bookmarks!
Will report more in due course.
help
hi
done everything as you say but after
adb shell flash_image recovery /sdcard/recovery.img
i see on screen
error writing recovery: Permission denied
???
Hi
IS DONE I make it happend very nice thanks to you
regards
qpop said:
for example, when in the compose sms section, when typing someones name in...rather than doing "correction" style numbers, it actually has a drop-down list with names and numbers.
Click to expand...
Click to collapse
My Orange Hero does and has always done that.
Paul, any chance of a real dummies guide in how to do this please ? Why the need to download your archive and also the patched one ? Or am I missing something ?? Sorry all this hacking is very new - with Nokia you just change the product code to allow you to update to the latest firmware.
At the time of an HTC update for the Hero, I can guarantee Orange will take weeks and months and more likely never approve the update... and to have these bug fixes would be essential to ensuring continued please with my Hero.
All done don't no if its in my head but it now seem more responsive compared to the Orange flavour.
Thanks Paul
Hmm I got this nandroid working but I could root / access as superuser on my hero anymore, and re-rooting it doesn't work. Any idea?
edit - Sorry, it was my fault, forgot to enable USB debugging after the flash, silly me!.
gaz31
I'm glad you mentioned it... I have noticed a difference too.. I have also noticed a longer battery life... I have disabled 3g and have removed BBC widget and am using my phone as normal now (not using it every 2 mins cos I love the phone!!!)
Cheers

Help! How to install Android on my Touch Pro 2?

== MOD EDIT ==
please check stickY
== END EDIT ==
Hi there,
First of all! Great forum! You guys have build a great community and I like it. But I hope you can help me with this. i know there are a lot of threads about this, but because all the different type of phones/android versions ect... I don't know what to do...
My question, how can I get Adroid running on my HTC Touch Pro 2 (Rhodium). I have the standart version, so not a branded one.
I've tried to install it but android won't launch. Maby one of you could create a mini tutorial or a noob tutorial, because I think there are more people like me (with less knowedge of phone tech) who want to run android on their phones. I hope you could help me!
Thanks!
Kind Regards,
Sami
http://forum.xda-developers.com/showthread.php?t=627997
Rhodium XDAndroid Rebuild .CAB WWE(02/24):
Please download the appropriate .cab for your device!
Rhodium/Touch Pro 2 Android .cab:
Rhod210 Download
Tilt2 Android .cab:
Tilt2 Download
NEW: Rhod100 fr/uk/de Android .cab:
Rhod100 Download
Instructions for .cab:
Cab is only WWE for the moment. If you still want to try this build skip down to the .rar for any other language.
If you are installing this over an old version of android, and you do not format your SD card, make sure that you at least delete data.img file from your SD card!
Copy to SD card
Install: This .cab does install directly to your SD card.
Soft Reset your handset
Run Haret from start menu and enjoy!
Click to expand...
Click to collapse
how could it be simpler?
Samich2007 said:
I have the standart version, so not a branded one.
Click to expand...
Click to collapse
so download the rhod100 and run it.
where do u dl haret.its mentioned but theres no dl link
cdiesel said:
where do u dl haret.its mentioned but theres no dl link
Click to expand...
Click to collapse
Haret is part of the android program. (haret.exe)
You can either use a file explorer to navigate to storage card/android/haret
or with the .cab installs (anything after 2/22) you will get an icon in your start menu.
Reefermattness said:
Haret is part of the android program. (haret.exe)
You can either use a file explorer to navigate to storage card/android/haret
or with the .cab installs (anything after 2/22) you will get an icon in your start menu.
Click to expand...
Click to collapse
yea thanks i did a little digging and was finally able to understand that
i dont know why posts like this are started. its so easy to use this perfect cab file! nothing else to do. if people would read just 10 minutes in other threads all questions should be answered...
how could it be simpler?
Quote:
Originally Posted by Samich2007 View Post
I have the standart version, so not a branded one.
Click to expand...
Click to collapse
so download the rhod100 and run it.
Click to expand...
Click to collapse
Hi Thanks I've used that thread but used the wrong cab. Didn't know that rhod100 is the standart version
Thank you! It works now, but is it a known problem that you cant fill in the correct code (PIN code for your SIM?).
And second I can't charge my battery with the usb cable is this also a known problem?
Thanks
Regards!
Sami
Samich2007 said:
Hi Thanks I've used that thread but used the wrong cab. Didn't know that rhod100 is the standart version
Thank you! It works now, but is it a known problem that you cant fill in the correct code (PIN code for your SIM?).
And second I can't charge my battery with the usb cable is this also a known problem?
Thanks
Regards!
Sami
Click to expand...
Click to collapse
Disable your pin in WinMo as stated in my release notes.
Samich2007 said:
Hi Thanks I've used that thread but used the wrong cab. Didn't know that rhod100 is the standart version
Thank you! It works now, but is it a known problem that you cant fill in the correct code (PIN code for your SIM?).
And second I can't charge my battery with the usb cable is this also a known problem?
Thanks
Regards!
Sami
Click to expand...
Click to collapse
as mentioned above
read the XXXX manual before posting...
edit:
ok Reefermattness was faster again
Mod Edit: Keep language clean juniors use XDA, also sometimes best to say nothing........
Oké thanks
Works, xD I will read better next time,
And is there a version from android that can enable the wifi on the touch pro 2?
Samich2007 said:
Oké thanks
Works, xD I will read better next time,
And is there a version from android that can enable the wifi on the touch pro 2?
Click to expand...
Click to collapse
next question which could be answered in minutes reading other posts...
NO there is no android version with working wifi for rhodium yet...
Oké i'm sorry... Hope it will be availible soon.
Samich2007 said:
Oké i'm sorry... Hope it will be availible soon.
Click to expand...
Click to collapse
To prevent spam to the forums, new users are not permitted to post outside links in their messages. All new user accounts will be verified by moderators before this restriction is removed.
I have Android installed on my phone and it works fine except one MAJOR thing. I messed up the touch screen calibration and now I can't use the touch screen in android and I cant figure out how to recal the touch screen in android.
Got it. i just deleted the ts calibration file from the android project folder and started android again.
lhwparis said:
as mentioned above
read the ****ing manual before posting...
edit:
ok Reefermattness was faster again
Click to expand...
Click to collapse
Ok man maybe you can help me out with the problem im having. I go to file explorer and i launch Haret.exe and it immediately takes me to the linux booting page with the penguin at top. But it soon stops saying "Cant access tty. Job control turned off. And it doesnt move from there. What am i doing wrong?
delete all the contents from the .cab file you downloaded, make sure your memory card has wiped any remaining files from the original download, re-install and make sure you are downloading the correct .cab file for your handset, install to memory card and try again.
Yo Ihwparis chill out. This is a forum for information trading and gathering. Everyone was a noob at one time or another including you and asked questions that have been asked a million times already. Stop treating people like idiots. Help them or stop reading the thread. Someone else will help them out. It's not that serious. I can tell you one problem here that I encountered was a thread would be started and trail off into someting completely different never answering the first question. After reading pages upoon pages you get nothing. Some people like myself have real lives and real jobs and dont have time to sit here and read every post. If you take it so serious maybe you should sticky an informative how to guide and maybe that will stop people from bothering you so much.
gary-09 said:
Ok man maybe you can help me out with the problem im having. I go to file explorer and i launch Haret.exe and it immediately takes me to the linux booting page with the penguin at top. But it soon stops saying "Cant access tty. Job control turned off. And it doesnt move from there. What am i doing wrong?
Click to expand...
Click to collapse
Is the folder in the root of your memory card?
dutch169 said:
Yo Ihwparis chill out. This is a forum for information trading and gathering. Everyone was a noob at one time or another including you and asked questions that have been asked a million times already.
Click to expand...
Click to collapse
I was actually on XDA for about 6 months, reading, before I finally decided to even MAKE an account, because I didn't want to be "That Noob". It was about another 6 months to a year before I posted anything at all. As you said yourself, most questions have already been asked a million times. This means that it is only a matter of reading, before you find someone that has asked the same question. In most cases once you find the question, and read a little further it leads you to the answer. He was smart enough to post in the correct sub-forum, which means he must have read through the forums a bit anyways. It wouldn't have taken much more work to read the top 3 sticky threads in that same sub-forum, and find the answer to the question.
I can get the whole thing to load however I cannot ever get the start screen (touch the androind to start) to ever let me touch it. The only thing that works is the keyboard input. Any suggestions?

Android port has began for Wave

I have been thinking of a side project i can start and since i recently acquired a wave and have a SGS myself it seems like a fun project. I found out that it has a hummingbird processor and may not be much difference from a Galaxy S in terms for hardware. Right now I'm just collecting as much information as i can about the device and what similarities the Wave has to a Samsung Galaxy S i9000.
So throw me what you got, its not an easy task and will need help, i have started another thread to see if i can get some Devs interested in this project and are willing to help in the android section
The idea is to port the Galaxy S i9000 firmware to the Wave that way you still have the samsung feel and since its made for the hummingbird processor. We will first need to see if we can get access to hardware and use that to inject code etc. This is in the research stage as of now.
THIS IS JUST A START AND MAY DIE BEFORE IT EVEN BEGINS. SO DON'T COMPLAIN WHY IT WAS STOPPED. I AM DOING THIS ONLY TO SEE IF I CAN DO IT AND NOTHING MORE.
If only i know C++ language, ican help you but i don't know. I'll follow and wait your results.
Keep going my friend. If you success (i hope) i will pay you to get the firmware!
thanx for starting this. i have visited forums where people are trying to port android on wave. And there biggest problem is bootloader. they cant dissemble it, just want to provide you this info. i will provide more info as soon as i get on any forums. This is the only way i can help, as i am only a application developer.
adfree is working on bootloader. Please, contact him.
@ jebise101
But you read this first?
http://forum.xda-developers.com/showthread.php?t=899535
I9000 stuff is available... but remember Baseband is Infineon... not Qualcomm...
Aplication Processor is identical...
Maybe more luck with Galaxy K M130K Firmware:
http://forum.xda-developers.com/showpost.php?p=12083886&postcount=7
But I can't find Firmware for M130K
Go find Firmware from M130K with BootFiles.
it says original firmware for M130K but not sure
pspmaster. tistory. com/48
looks like it is the firmware you wanted adfree
here is the link righ here easier http://pspmaster.tistory.com/48
use google chrome with this page as it is in korean
Well, if you google M130K-KIES, you can get the firmware via 4share, but the file it got was without the boot.bin :-(. But I'm not sure about the firmware from pspmaster.
whats with this project ?
http://www.androidport.net/
pawlakpl this site androidport.net never end this project becouse no money.
Here is an app someone created i will try it when i get home to see if if i can get it to download the Korean SGS firmware (use to use it all the time back when i had the O2, if anyohne wants to give it a shot feel free
http://www.modaco.com/content/i8000...41/samsung-mobile-firmware-queries-downloads/
cinimini said:
pawlakpl this site androidport.net never end this project becouse no money.
Click to expand...
Click to collapse
But XDA can end a project ?
I've downloaded M130K-HOME-REV04-EA29.tar
Thanx to hsingh56 and mylove90.
As I've searched several hours via Google with no success...
Now I have also Bootloader files from M130K... but looks totally different as I thought...
Anyway... I9000 and M130K have similar folders/files...
factoryfs.rfs.img
Rename into *.img like above. And extract with WinImage for instance...
Then use open eyes.
1.
Few Images are QMG... for PowerOFF QMG Animation...
2.
*.so files
3.
lib\hw
...s5pc110.so
But anyway. As long NOBODY try with JTAG (RIFF BOX) + Wave S8500 + knowledge different combinations. If Boot area is secured?
We will NEVER see Android on Wave...
Best Regards
So the wuestion is....
Whos have JTAG+S8500+Knowledge+Free time to help the bootloader creation?
Yes,boot and sbl is secured(e-fused)
cinimini said:
pawlakpl this site androidport.net never end this project becouse no money.
Click to expand...
Click to collapse
Euhmm. If you guys actually READ The site it shows we are working. Only we PROBALY need IDA. But we're in touch with Dopi from IDA. if things work out we will have the bootloader disassembled within 2 weeks and we can start testing the modified FW from the Galaxy S
ShadowAS1 said:
Euhmm. If you guys actually READ The site it shows we are working. Only we PROBALY need IDA. But we're in touch with Dopi from IDA. if things work out we will have the bootloader disassembled within 2 weeks and we can start testing the modified FW from the Galaxy S
Click to expand...
Click to collapse
Great news! Keep up the good work.
ShadowAS1 said:
Euhmm. If you guys actually READ The site it shows we are working. Only we PROBALY need IDA. But we're in touch with Dopi from IDA. if things work out we will have the bootloader disassembled within 2 weeks and we can start testing the modified FW from the Galaxy S
Click to expand...
Click to collapse
Please, STOP. I won't comment on that nonsense. Let me just say good riddance to you and come back with the results. We already had enough talking and it's time for you to show whether you can distinguish ARMv4, ARMv7, decrypted, encrypted executables and any basics of code signing.
great initiative...keep it up the work and never give up...

RadioComm v11.11.11

Here we have it,
RadioComm support tool, used for Motorola Handsets.
I found the link somewhere on the net
This is the latest edition i have found so far,
Good Luck
http://www.mediafire.com/file/62wwr6qw68qvrb6/RadioComm_v11.11.11_Install.msi
Like the availability, Bump the 'Thanks' button. ;]
Guide on how to actually use Radiocomm 11.11.11?
I've only seen screen shots for it but it has a lot of options and looks like a really complex program. All I need it for is to simply flash SPRecovery.spf on my phone when I root it. So could anyone link me to a Radiocomm flashing guide or at least tell me what I need and what to do and if I need to do it before or after rooting? Thanks and I've rooted a lot but never changed recoveries, all the one click root apps give me recoveries that I hate such as RA-eris V1.6.2 because they are a pain. I'm manually rooting my Eris [I've already done manual rooting before] and just choose my own recovery and SPRecovery has gotten a lot more kudos than RA-eris v1.6.2 [Amona Ra?] and ClockworkMod. If anyoen also knows of any other recovieres they like better than please let me know, but for now just a good how to guide for flashing with Radiocomm. Thanks a lot in advance guys! =]
Hi There,
I apologize for not having any links off hand, (though i may be able to update int he future).
I know i have ran across a few guides for radiocomm on the internet... Try using Google.com, and keep an eye out for .pdf files..
I am sure you can tinker around in the menu's also... It is a very robust program...
And, just curious... Did you mean to say .SBF file? instead of .spf?
Good Luck
Here You Go,
I found an older manual for Radiocomm... Idk where i found it, or how helpful it may be... but it's a step in understanding...
Good Luck
yep this tool is interresting...
Here is version 11.12.2
Thanks for posting these files but I can't get them to work. They will not find any of my phones. I have the motorola drivers installed and my puter finds the phone but the radiocomm program won't connect, it stays red. I am running windows 7 with motorola 5.5 drivers, net framework 4 is installed. I tried it in compatability mode, the phones are set to pc mode. my phones are a droid 2 global, and two are a bionic. Can someone please help me out?? Thanks!
For all to know.
The low level tools are written for use with WinXP or lower.
Use with a newer Windows in XP-Mode at your own risk.
That's why to keep an old XP machine (or Win2K) on hand.
Good info everyone!!
Here is a backup link to the version epsylon updated us with.. :]
http://www.4shared.com/archive/0uhGKq5S/RadioComm_v11122_Installmsi.html
Sent from my SGH-T959 using xda app-developers app
anybody radio comm the newest version willing to donate...............thank you
11.12.2 Version
joe zack said:
anybody radio comm the newest version willing to donate...............thank you
Click to expand...
Click to collapse
Here:
https://dl.dropbox.com/u/7632904/RadioComm_v11.12.2_Install.zip
[https://dl.dropbox.com/u/7632904/RadioComm_v11.12.2_Install.zip[/QUOTE]
thank you for the post ,,,,,,,,,,,,sorry i meant leatest version like v11.12.3
but anyway thank you again for posting
lwolf7 said:
For all to know.
The low level tools are written for use with WinXP or lower.
Use with a newer Windows in XP-Mode at your own risk.
That's why to keep an old XP machine (or Win2K) on hand.
Click to expand...
Click to collapse
Well technically the most important thing with these kind of programs is the bits. Most of them are written for 32bit OS.
I'm using win8 32bit and all of my tools work fine. Just used Radiocomm today and yesterday to read some info from some older motorolas.
Granted not *everything* will work. I had to use Blackberry Desktop Manager 6.0 or newer to get it work right.
5.0.1 or older would BSOD on me when I tried to do too much with the RIM Virtual Serial Port.
How to use this program to enable the FM radio on my Motorola phone? Someone claims to have done this using this program but he's not responding to requests for more information. I've installed the program but don't want to brick my phone. In the past I've messed with other programs like QPST and QXDM to enable additional bands so I'm not an entire newbie. Thank you.
Here is a link for using radio comm on droid,https://forum.xda-developers.com/showthr
TimelesslyPrecise said:
Hi There,
I apologize for not having any links off hand, (though i may be able to update int he future).
I know i have ran across a few guides for radiocomm on the internet... Try using Google.com, and keep an eye out for .pdf files..
I am sure you can tinker around in the menu's also... It is a very robust program...
And, just curious... Did you mean to say .SBF file? instead of .spf?
Good Luck
Click to expand...
Click to collapse
,,,https://forum.xda-developers.com/showthread.php?t=2166542

[25 Dec][FAQ] Xperia Play for Dummies

Hi everybody,
I just get my Xperia Play but I don't really know where to start.
It's been 4 days that I'm reading threads to know how to get the best from my phone. Unfortunately, most interesting tips are dispersed here and there.
So, I will try to ask the good questions so that everything can be available in a single thread. It will be a newbies FAQ!
Let's go then!
1. I just bought my Android phone. What should I know first?
- Knowing the phone code names will help you searching for the good information. Every phone has his commercial name (Xperia Play), his model name (R800) and his "nickname" (Zeus).
- Check the Android and ROM version as it will be often asked when you look for something about your Android. To do this, on your Phone, go to Settings -> About the Phone
- Do you plan to subscribe to a DATA plan with your phone provider: if not, it's better to disable some features to avoid bad surprises.
- Some say that rebooting the device helps in many cases
- there are NO VIRUS with Android, antivirus tools are all useless
- Wireless, Bluetooth, GPS : if you don't use them it's better to disable them. You will spare battery and you won't see advertises in the free progs
2. What should I do first?
- If you still don't have it, you will have to create a Google account so that you can backup and manage your contacts, for example
- RTFM !
- If you don't plan to use a custom ROM (alternative software not develloped by the manufacturer), you'll have to see if a newer version of the official ROM is available. This can be done through the official tool PC Companion, available on the manufacture website. ( http://www.sonyericsson.com/cws/sup...s/subject/pccompanion/xperia-play?cc=ph&lc=en )
- Learn the lexicon : http://forum.xda-developers.com/showthread.php?t=1253127
3. Should I hack my phone immediately? (Root, boot unlock, flash, unbrand, ...)
- You will have to if you want to : remove unwanted software installed by the provider, change the internal software with a custom one, ...
- Some applications will require to have more access to work: ex: MyMobiler needs Superuser access, available by rooting the phone
- Learn more about root and bootloader here : http://forum.xda-developers.com/showthread.php?t=1076720 (thanks Logseman)
4. Are these hack methods reversible?
- Yes (thanks Jordanooo)
5. Do they void warranty?
- As they are reversible, they shouldn't void the warranty
- For Sony-Ericsson, it's important to notice that they support custom development and helped the FreeXperia team. (http://forum.xda-developers.com/showthread.php?t=1281349)
6. I found many ways to root my phone: which one is the best?
- DooMLoRD method is a popular one : http://forum.xda-developers.com/showthread.php?t=1321582 (don't forget to thank him if you use it)
- you can check this link too : http://lifehacker.com/5789397/the-always-up+to+date-guide-to-rooting-any-android-phone
- for Xperia, there is the Xperia Easy Rooting Toolkit by DooMLorD : http://forum.xda-developers.com/showthread.php?t=1320350
7. Once rooted, can I remove applications I don't want anymore?
- Yes, this is possible. These applications are called "Bloaters". You can use Titanium Backup as Jordanooo suggested. This seems to be the best one around. There is also Android Mate o SystemApk Manager too. They're all available on the market
8. Where can I find generic/stock ROMs?
- Some are available on this forum: http://forum.xda-developers.com/forumdisplay.php?f=1093
- for Xperia Play you can have a look at Logseman list of downloads http://forum.xda-developers.com/showpost.php?p=18226603&postcount=2 (thank to him)
- there is also the Wotan website ( http://www.wotanserver.com/ ) for SE and Samsung but you have to register.
9. Where can I find good custom ROMs?
- Here : http://forum.xda-developers.com/forumdisplay.php?f=1093
- see 2nd point of previous question
10. OK but what is a custom ROM?
- Custom ROM are not official customized version of the Android software made by common developers (not by manufacturer). In general, they offer more functionality and sometimes pre-installed software. Or they get rid off default applications nobody needs, to save memory.
11. What is the best method to flash my phone?
- As Jordanoo said, it's better to use the method suggested by the author of the ROM. The procedure is usually explained in the related post.
12. Can I use Sony PC Companion to upgrade my phone after I hacked it?
- You will have to unhack your phone to do this. (Jordanoo)
13. What are the must-have applications?
- File browser: Astro File Manager
- Alternate market: AppBrain App Market
- Remote display&input : MyMobiler
- Web browser: Dolphin Browser HD
- Video player: QQPlayer or MX Video Player
- Mp3 player: PowerAmp
- Wifi tool: Wifi Analyzer
- Remote control: MyPhoneExplorer Client or AirDroid or File Expert
- Contacts management : Go Contacts
14. What is the best tool to manage Android contacts from the computer?
- There is an add-on for Thunderbird but I didn't tried it yet ( https://addons.mozilla.org/fr/thunderbird/addon/google-contacts/ )
- It is very easy using MyPhoneExplorer as mentionned in the previous question
15. Are they offline navigation application available?
- Sygic seems to be the best now (available on the market). Maps are downloadable from home Wireless.
16. What are the must-have games?
- Angry Birds (of course)
- Bubble Blast 2
- Live Hold em Poker Pro
- Mame4Droid emulator (ALL working roms can be found here : http://sentinelgames.com/documents/mame.html or here : http://lostsite.altervista.org/wiz/?page_id=2368 )
- GenPlusDroid: a Genesis/Megadrive emulator
- SNESDroid: a Super Nintendo/Famicom emulator
- Xperia Play optimized ones :
-- ***** : Drag Racing, BLOOD & GLORY
-- **** : Diversion, GUN BROS MULTIPLAYER
-- *** : Guns'n'Glory WW2, Pocket Legends (3D MMO)
-- ** : Super Dynamite Fishing FREE, Greedy Spiders Free, ETERNITY WARRIORS, Guns'n'Glory FREE
-- * : Aporkalypse FREE, Crazy Snowboard, Princess Punt, Townsmen 6 FREE , Earth And Legend
17. I tried to install an application but my Xperia said that there's no more place on internal memore. And now?
Yes, unfortunately, Sony didn't provide Xperia phones with a large internal memory (+/- 380Mb). This is indeed not enough to enjoy all what you Xperia can offer. The tool App2SD can help you free some space but many apps will remain unmovable.
There are 2 methods to emulate a part of your SD card as the internal memory: the ADB method (ADB for dummies) and the Link2SD method (Link2SD Guide). The first one don't need your phone to be rooted, the second well.
I hope there's no mistake in what I wrote, as it's only my personal experience. I apologize to the gods of XDA for this. (and for the rest too)
Of course, if someone has something interesting to ask, you can do this here! ;-)
Thread will be fed every time I got a question without a good answer.
Hope you will help! And I thank you in advance.
Popodom
popodom said:
Hi everybody,
I just get my Xperia Play but I don't really know where to start.
It's been 4 days that I'm reading threads to know how to get the best from my phone. Unfortunately, most interesting tips are dispersed here and there.
So, I will try to ask the good questions so that everything can be available in a single thread. It will be a newbies FAQ!
Let's go then!
1. I just bought my Android phone. What should I know first?
2. What should I do first?
3. Should I hack my phone immediately? (Root, boot unlock, flash,
unbrand, ...)
4. Are these hack methods reversible?
5. Do they void warranty?
6. I found many ways to root my phone: which one is the best?
7. Once routed, how can I remove applications I don't want anymore?
8. Where can I find generic/stock ROMs?
9. Where can I find good custom ROMs?
10. What is the best method to flash my phone?
11. Can I use Sony PC Companion to upgrade my phone after I hacked it?
12. What are the must-have applications?
13. What is the best tool to manage Android contacts from the computer?
14. Are they offline navigation application available?
15. What are the must-have games?
Of course, if someone has something interesting to ask, you can do this here! ;-)
Thread will be fed every time I got a question without a good answer.
Hope you will help me! And I thank you in advance.
Popodom
Click to expand...
Click to collapse
1. Its an android.
2. Turn it on.
3. Its up to you. You decide if you want to so soon or not.
4. Yes, read other topics
5. ...reversable
6. The one where everyone comments 'works great'
7. With an app, titanium backup is good
8. Development section.
9. Development section
10. Erm, read the post of the rom you are flashing.
11. After you un-do things, yes
12. See themes and apps section
13. Seems pointless, but use google.
14. Google it
15. See themes and apps section, or the full games list in general
Sent from my GT-I5500 using Tapatalk
There really should be an autoban feature when a 5th identical subject is posted.
Its almost like someone is making new accounts and asking the same questions over and over again to annoy us
Deleted original post as not being nearly as funny as I first though it was.
Popodom, you just need to take your time and learn about Android before you make too many changes. This forum has some good tips, but unless you're already a genius with programming, linux and Android, you're better off not asking anything simple. This is a very unfriendly forum, and it tends to bring the meaness out in people. The know-it-alls have little patience for us n00bs. However, they -are- extremely knowledgeable, so it just takes patience and a LOT of reading. Don't worry, we'll get there, someday.
Gosh.
To skip all the hassle u are getting I suggest:
1. Turn on the phone
2. Play with it.
3. Come to xda and read like the rest of us.
4. Start doing your "hacking" and other things when /you/ feel comfortable and no sooner.
5. Don't ask any more of these questions if u don't want to get flamed and end up with 3rd degree burnage.
Sent from the future using the nexus prime (squared) 4, using XDA ultra premium lambskin App
People on this forum are very rude. If you don't want to answer the question don't post anything or look at the post. You can you can tell by the topic what the questions will be on this one. I came from a iPhone and had no idea about android. Had many questions but never asked because I would be put on blast. The iPhone forums were very helpful and I never saw rude and sarcastic replys to posts. They were always willing to help no matter what the question. Just thought I would throw that out there. And the searching on here sucks maybe the desktop version is better.
Sent from my R800x using XDA App
I'm sorry but I can't delete this thread myself.
Is there some Admin out thre who can do this for me ?
Thanks !
Flag the thread.
By the way, the search function sucks in both the desktop version and Tapatalk. VBulletin search functions tend to suck quite a bit in general.
Oh, and BTW, in any forum, not only this one, no one likes to do people's homework. See it from this point of view: someone who's never contributed anything to this forum (not because s/he's a bad person or whatever, simply because s/he's new) starts up with post which is basically "gimme gimme gimme". Do you think it's rude to tell someone you've never seen and who starts talking to you by saying "gimme gimme gimme" to get lost?
Hello brothers.
Excuse the ignorance. But is there any way to run the gamepad? or control games with this rom? I installed it correctly. I could not make it work in games.I'm new to XDA, I hope I can still contribute a lot to the forum. Whenever I join others in my tongue. And now I want to collaborate on international forum.
Well here we go ...
I installed the rom JB Paranoid in my xperia play. Works great, besides using a clean configuration, the level of battery lasts much. I used the Turbo Kernel, which also surprised me with such ease.
I am available to help those who have difficulties installing this rom on xperia play. But I have a problem. Jellybeam with the gamepad, or control simply does not work. Anyone have any way to make it work?
grateful

Categories

Resources