Related
Hi,
I am having some real problems with my Desire. I was using T-Mod (Leedroid) but thought I'd try out the RCMix ROM this arvo so I did all my backups and a Nandroid backup. I was using CWM 2.5.0.7 and this was fine before but I tried to flash RCMix on and it didn't work. I then tried to upgrade CWM to 3.2.0.8 unsuccessfully. I even tried upgrading from ext3 to ext4 and I formatted my 16GB SD card but that didn't help either.
I have not been able to upgrade anything yet and my phone will not even boot up stock. It is not letting me do any installs of zips, it says no files found and it won't let me do any Nandroid restores either.
So I am stuck with a useless phone that I can't even temporarily use because it won't boot past the Telstra boot screen. I can only get into bootloader and recovery. I have wiped everything but can't get anything to work. I am S-ON.
Can anybody help me? I'm at a loss and have been googling and trying things for hours upon hours tonight. It would be great just to even get back to stock....
Format your SD card (copy content to PC first!), go to fastboot and then try RUU from Telstra...
Sent from my HTC Flyer P510e using Tapatalk
The Telstra RUU didn't work because it's too old. I'm downloading the downgrade from 2.2 to 2.1 right now, so I'll try that and see what happens.
Any ideas why CWM can't see the zip files on my sd card?
Corrupted data perhaps...? Try formating your sd (all partitions - if any ext3/4) and rebuild your partitions... It should work...by your intel, it must be an sd card problem, have you tried another one...?
Sent from my cool Desire
I tried formatting it a few times. I tried both ext3 and also ext4 but it still couldn't see the zip files. I also formatted the FAT32 part. I used Gparted to do it with the FAT32 partition at the left and ext3/4 on the right. I tried it at 2GB but it didn't like it so I tried 1.8GB and then it recognised the ext3/4 part but still can't see the zip files.
Just finished downloading the downgrade so will try that now.
Perhaps something is wrong with my sdcard..?
The downgrade failed but I've managed to flash RCMix on with a different 2GB sdcard. I have tried to use the other card again but CWM still can't find any files on it for some reason. Gparted is also not loading it anymore so perhaps that 16GB sdcard is dead. Looks like I'm going to need to buy a new 16GB sdcard so I can store my music on there again as 1GB is being used for the ext3 partition.
Does this sound about right, that the sdcard is dead?
I can still use and access it in windows, it just won't work on the phone.
I found that if the cards file system is on the way out cwm nicely wipes it for me. If after several formats its the same, it may well be a dead card
Sent from my HTC Desire using XDA App
yeah ok, I've formatted it numerous times and it still won't read any zips. I wasted so much time when all I had to do was use another sdcard....sucks so much.
Also how do I permanently upgrade CWM from 2.5.0.7? I have to keep fake flashing 3.2.0.8 at the moment.
I was thinking when I get my new sdcard that I'll try and do S-OFF. Is it worth it? Should I bother?
Oh god yeah. Fake flash has so many flaws. S-off and fastboot flash recovery.img. see fastboot faq in my signature
Sent from my HTC Desire using XDA App
ok thanks, I'll try S-OFF and flash a new recovery.img when I get a new sdcard.
Which version of CWM is best to use? I was going to use 3.2.0.8 because that's what was said to use with RCMix.
I use 5.0.2.0 for some time now and I haven't had any problems at all.
http://download.clockworkmod.com/recoveries/
Please use the Q&A Forum for questions Thanks
Moving to Q&A
Avilis said:
I use 5.0.2.0 for some time now and I haven't had any problems at all.
http://download.clockworkmod.com/recoveries/
Click to expand...
Click to collapse
ok thanks, I'll try that version then.
Do I need to download recovery-clockwork-5.0.2.0-bravo.zip or recovery-clockwork-5.0.2.0-bravo.img ??
.img to fastboot flash it. I prefer 2.5.0.7 myself
Sent from my HTC Desire using XDA App
Cool thanks. I can't use 2.5.0.7 though as apparently it won't work well with the ROM I'm using.
MU7L3Y said:
Cool thanks. I can't use 2.5.0.7 though as apparently it won't work well with the ROM I'm using.
Click to expand...
Click to collapse
And why not? You get errors?
I did have some issues but never mind all that now. I bought a new 16gb card today and am now S-OFF thanks to the revolutionary method and have flashed cwm 5.0.2.0, a new splash img and boot animation. Now to set up the rest of my phone. I'm a happy chappy!
Hi,
So i have a HTC Desire flashed to CM7r2 Hboot (just moved from stock) and i have tried flashing all possible custom roms from xda (BlissMod007, AceS, Starburst, RevolutioN Aurora, LeeDroid etc etc....) NONE of them work on my desire.. I checked my hboot...checked my root everthing is fine...i even have a 1GB ext partition on my card that the ROM's want...Majority of the ROM's are stuck on the lockscreen others freeze after some time ..
I really want to know whats wrong! I CANT live with the original froyo bc that gives me only 25mb of free internal memory.
SOMEBODY PLEASE HELP ME!!
rappersup said:
Hi,
So i have a HTC Desire flashed to CM7r2 Hboot (just moved from stock) and i have tried flashing all possible custom roms from xda (BlissMod007, AceS, Starburst, RevolutioN Aurora, LeeDroid etc etc....) NONE of them work on my desire.. I checked my hboot...checked my root everthing is fine...i even have a 1GB ext partition on my card that the ROM's want...Majority of the ROM's are stuck on the lockscreen others freeze after some time ..
I really want to know whats wrong! I CANT live with the original froyo bc that gives me only 25mb of free internal memory.
SOMEBODY PLEASE HELP ME!!
Click to expand...
Click to collapse
So you flashed the CM7r2 HBOOT and used every rom but CM7? If those roms aren't designed to fit on the CM7 HBOOT you'll end up with half a rom flashed on there.
Did you wipe everything between flashes (including dalvik cache)?
Last thing, try flashing back to the stock HBOOT partition layout and see how that goes. Might've got a corrupted partition file (you should always an MD5 checker on stuff like this).
yes when i flashed the CM7 hboot i flashed the CM7 ROMs for which i wudnt get past the white screen with htc in green
and when i had the stock hboot the ROMs wud get flashed the first boot would go smooth (wud take some time obviously but thats normal right?)
and yes everytime i flashed i wiped everything including dalvik cache.
and i also dont understand what with the MD5 how is that important... because i completely ignored it before.
From your posts looks like you did not read the tutorials carefully.
EXT partition made correct?
What Recovery do you have?
What version did you download from the ROM?
MD5 Checksum is fine?
i had this problem aswell before so all i did was flash the alpha rev downgrader hboot then on the phone click on restart bootloader then just flash the cm7 hboot..
then just wipe everything and flash the rom ..
also some sense roms take up to 15 mins to boot and some of the sense roms resarts the fone three times so just wait for a maximum of 20 minutes
yes ext partition is correct i had a 2GB ext4 previously but then i read on the forums that not all ROMs were compatible with a ext4 so then changed it to a 1GB ext 3
Clockwork Mod Recovery 2.5.0.7
Whats this MD5 Checksum ?? How do i verify it ?
Also whats the alpha rev downgrader ? do you have to downgrade the hboot ?
Because i moved from CM7 to stock just by reflashing it and on my bootloader i saw the change just fine.
I have 10MB free internal memory WT*
rappersup said:
...
Clockwork Mod Recovery 2.5.0.7
...
Click to expand...
Click to collapse
Use Amon ra recovery. CMR didn't work for me either.
Is that true could it be CMR ??
And how do i get amon ra ? i got CMR by default like when i rooted using unrevoked.
If CWM 2.5.0.7 doesnt work at all, it may be because you have a PVT 4 erase size 40,000 device.
Not sure why my guide is one of the only guides that mentions this, but there you go.
rappersup said:
Is that true could it be CMR ??
And how do i get amon ra ? i got CMR by default like when i rooted using unrevoked.
Click to expand...
Click to collapse
Some people have trouble with clockworkmod. Normally they solve it by switching to another recovery so it may be the reason to what you are experiencing now.
To get AmonRa recovery, download AmonRa recovery here. Then plug your phone into the computer and use this utility to flash the recovery.
itachi1706 said:
To get AmonRa recovery, download AmonRa recovery here.
Click to expand...
Click to collapse
Actually, I think the test 2.0.1 is better (for SD-ext backup), which you can get here for a limited time only:
http://db.tt/z7hzdp34
No mine is a pvt 3 atleast that's what it says in my bootloader
I think I'll try amon ra
Hey Guys,
So i flashed AmonRa and then flashed a ROM and it works fine so far.
Thanks alot will get back on how its performance is in the long run.
Thanks a lot
okay no as soon as i rebooted it got stuck on the lockscreen and froze....rebooted again same story....rebooted again same story done that about 5 times now
sorry false alarm its like the problem never went...back to the same old situation...
can someone please help me out..
also is there a way to go back to cmr ??
Try changing to a different kernel. It may be a problem with the kernel. What Rom are you using now?
Sent from my HTC Original Desire using Tapatalk
Well I tried RevolutioN - http://forum.xda-developers.com/showthread.php?t=1300224 which worked for 30 mins before it froze
and then i tried ReflexS - http://forum.xda-developers.com/showthread.php?t=1054435
which worked for about 15 mins and then froze.
which kernel should I flash ? thats the only thing left to flash now
And now i have switched back to CMR as i had a CMR backup of the stock ROM.
So im running the stock ROM now.
Try snq 111005 or gingercakes 0.6d. They are the stablest kernels for sense roms for me. Use the search function to find the kernels.
Sent from my HTC Original Desire using Tapatalk
im sorry but i cant find either of those kernels
i found gingercakes 0.8f and many other versions that were 0.8d/e/etc etc
can u post a link or something like that....also i dont know how to flash a kernel is it just like a rom zip thru clockworkmod ??
rappersup said:
im sorry but i cant find either of those kernels
i found gingercakes 0.8f and many other versions that were 0.8d/e/etc etc
can u post a link or something like that....also i dont know how to flash a kernel is it just like a rom zip thru clockworkmod ??
Click to expand...
Click to collapse
Can't help you with finding the kernels I'm afraid. But to flash one just do it through recovery like you would a rom. No need to do all the wipes, just wipe your dalvik cache before you flash it.
Hello,
Today I attempted to root my HTC Desire. I used this site ( youtube.com/watch?v=kvg0i8in96M ) to do so.
I installed several programs that required SU access to check if the rooting was succesful.
I downloaded SystemAppRemover to remove some of the originally installed pieces of software. Unfortunately that didn’t work out too well: some of the buttons on the Phone aren’t responding anymore. So I figured, let’s turn off the Phone and turn it back on.
Then the next program revealed itself: the Phone wont boot, its trapped in the booting proces. I read elsewhere online that I should try to revert to the original firmware, but I have no idea how to do that.
Can anybody advice on this please? I used android 2.3 before.
Thanks in advance,
Veldscholte
Recovery working? Have you done any back up before you tried that app?
Sent from my HTC Desire using XDA Premium App
First backup is for saving a lot of troubles, like this one... Was it not worth to make it? You can flash any custom ROM or you can flash ruu-see bortak guide from stickies I'm on the phone limitation of resources ATM
Sent from my HTC Desire using XDA Premium App
I see that you're running Runnymede 5.0.3. Looking through the ROM's thread, i've found that it requires that you have an EXT partition on the SD card and that your phone is S-OFF, both of which, i believe, your phone lacks. That might be the reason why it's stuck at the bootscreen.
Runny 5.0.3 ROM's thread said:
REQUIREMENTS:
- CM7r2 or stock HBOOT (from Alpharev)
- Must be S-OFF! (see S-OFF guide).
- A 1GB ext4 partition (see partition guide for 4EXT Recovery).
- A recovery with touch drivers: I recommend 4EXT Recovery. Optional but recommended.
Click to expand...
Click to collapse
Before installing ANY ROM, please read its thread carefully. Some ROMs require various types and sizes of EXT partitions, others require different HBOOTS etc. If you don't follow the instructions properly, you will get bootloops.
From my understanding, you are now running the stock HBOOT (250 MB of /system space). If your phone is network-free (unbranded), you should download the latest 2.2 stock RUU from HTC, install it on your phone and that'll solve all of your problems (use Search). You can root/S-OFF afterwards and install any ROM that your heart desires (making sure you follow instructions, this time).
If you read his first post and watched video, he is s-off with stock hboot as he used revolutionary to get root... i think he is missing only ext4 partition and touch recovery
First off. ALways do a Nandroid backup from within recovery. This would have given you the option to restore your original rom,"with S-Off".
Head over to http://forum.xda-developers.com/showthread.php?t=1200261
download and install from recovery,"Wipe data/factory reset & dalvik cache first"
please read Bortaks Guide before messing to much wth your phone.
Go to http://gparted.sourceforge.net/livecd.php
download Install Gparted Live either on CD or USB
Read instructions from site.
Do not use recovery to format ext3 or ext4. This will only lead to errors.
Veldscholte said:
Hello guys. Thanks for all the reply's. I'm sorry to say it, but I'm a beginner in this area. What is the best thing I can do now? How do I format all my partitions into ext4?
Click to expand...
Click to collapse
Why do you want to format ALL of your partitions to EXT4? You phone needs a FAT32-partition as well.
So if the ROM you flashed or you want to flash needs an EXT4-partition, backup all important data on your SD card, boot into recovery and partition your SD card with FAT32-partition plus an EXT4-partition with 1 GB (I recommend 1 GB because it will be compatible with nearly every ROM you find here) and copy all data back on FAT32-partition.
You can do this operation either in recovery (worked always well for me) or with GParted. Just do not use software like MiniTool Partition Wizard or any other Windows software which "deals" with EXT-partitions, because these types are Linux-partition-types and I would not trust Windows there if you want to have the rewards of your SD card.
In Q&A you can and will find a very good noob guide which will help you a lot:
http://forum.xda-developers.com/showthread.php?t=1016084
If you still have questions / problems, use the search. And if there is still something that bothers you, ask your question here in Q&A.
---------- Post added at 01:04 AM ---------- Previous post was at 12:58 AM ----------
bored_stupid said:
Go to http://gparted.sourceforge.net/livecd.php
download Install Gparted Live either on CD or USB
Read instructions from site.
Do not use recovery to format ext3 or ext4. This will only lead to errors.
Click to expand...
Click to collapse
This is just not true. Recovery is an easy and very good way to partition your SD card and will work well nearly every time. I cannot remember any partitioning errors (can you name at least one anyway?) or rather problems caused by partition with recovery. As far as I remember, the causes were always crap software like Rom Manager or MiniTool Partition Wizard or something like that.
MatDrOiD said:
Why do you want to format ALL of your partitions to EXT4? You phone needs a FAT32-partition as well.
So if the ROM you flashed or you want to flash needs an EXT4-partition, backup all important data on your SD card, boot into recovery and partition your SD card with FAT32-partition plus an EXT4-partition with 1 GB (I recommend 1 GB because it will be compatible with nearly every ROM you find here) and copy all data back on FAT32-partition.
You can do this operation either in recovery (worked always well for me) or with GParted. Just do not use software like MiniTool Partition Wizard or any other Windows software which "deals" with EXT-partitions, because these types are Linux-partition-types and I would not trust Windows there if you want to have the rewards of your SD card.
In Q&A you can and will find a very good noob guide which will help you a lot:
http://forum.xda-developers.com/showthread.php?t=1016084
If you still have questions / problems, use the search. And if there is still something that bothers you, ask your question here in Q&A.
---------- Post added at 01:04 AM ---------- Previous post was at 12:58 AM ----------
This is just not true. Recovery is an easy and very good way to partition your SD card and will work well nearly every time. I cannot remember any partitioning errors (can you name at least one anyway?) or rather problems caused by partition with recovery. As far as I remember, the causes were always crap software like Rom Manager or MiniTool Partition Wizard or something like that.
Click to expand...
Click to collapse
Apologies, what i should have said was," could possibly cause problems ". I have occasionally had problems with some fussy roms boot-looping after installation, but after reformatting in Gparted, they have worked," this could be coincidence though ". I fully agree with you on the likes of Rom Manager and MiniTools.
Veldscholte said:
***This method only works for users with hboot 0.93 and lower. Sorry 1.06 users, but until unrevoked updates, your stuck on stock htc***
I have hboot 6.93.1002..
Edit: Now I have an ext4 partition on my sd card. How can I install any custom rom on that partition? Windows can't read it.
Click to expand...
Click to collapse
Please do some research about installing ROMs etc. You clearly did not even understand the basics.
What hboot do you have? Still the same as first post? Post info from hboot/fastboot, why did you run RUU?
Sent from my HTC Desire using XDA Premium App
Ok, flash recovery via fastboot
Fastboot flash recovery "name of recovery IMG file"
Sent from my HTC Desire using XDA Premium App
Veldscholte said:
What image file do I need to flash?
Click to expand...
Click to collapse
The recovery.img-file.
for rmd recovery see my signature as you have no system yet... flash it then you can flash custom rom
Does RMD backup and restore .android_secure properly now?
Personally I wouldn't recommend anything other than cwm 2.5.0.7 or amonRA 2.0.1 depending on erase size to a newbie
Sent from my HTC Desire using Tapatalk
It should have... i remember there was conversation between you and rastaman if im right... but since new version came out 1.0.3.5, i was using 1.0.3.4 without any problem then I changed over to 4ext... I can't be 100% it was fixed... Can you have a look please?
yes i know cwm or amon ra but these have usb brick function i dont want to have him back if it will happen
Just in case 4EXT recovery
MD5 2D75F6EE7626D98F84E148C2BD8C0855
boot phone to fastboot, connect to pc and run in cmd:
fastboot devices
if you get any HTxxxxxxxxxxxxxxxxxxxxxxx number you can proceed to flashing recovery
kotag82 said:
It should have... i remember there was conversation between you and rastaman if im right... but since new version came out 1.0.3.5, i was using 1.0.3.4 without any problem then I changed over to 4ext... I can't be 100% it was fixed... Can you have a look please?
yes i know cwm or amon ra but these have usb brick function i dont want to have him back if it will happen
Just in case 4EXT recovery
MD5 2D75F6EE7626D98F84E148C2BD8C0855
Click to expand...
Click to collapse
I haven't recommended 4ext to anyone yet, Ive still been recommending what I mentioned, but Ive been using it solidly for a good few weeks now and I think I am about ready to start recommending it...
Veldscholte said:
How can I use fastboot if I can't get an adb connection?
Click to expand...
Click to collapse
adb and fastboot are 2 totally different things. It just happens that they both are command line and used to communicate with your android phone. The similarity ends there.
Do what Kotag said.
If you click the link to my guides in my signature, I have an adb and fastboot faq that may be of use to you.
Is it boot loop or stuck on splash screen?
Sent from my HTC Desire using XDA Premium App
That splash, that means booting process did not started
What hboot you have, I presume you flashed seb15 Runny, what version? Sd ext done properly?
Sent from my HTC Desire using XDA Premium App
Ive always been running CM roms since I got the phone nearly two years ago, but recently have been reading too many good things about ICS roms. My phone has been laggy as of late, and honestly after nearly 2 years, I wanna see and try something new. I've been reading some stuff about updating 4EXT or something like that. Can someone link me or explain in great details how i do this? What is it? And if I do that, will i still be able to run my old CM rom if i decide the ICS roms arent for me? I dont want to be unable to roll back.
Whats the best ICS roms out there right now?
Many thanks!
___________________
SOLVED AFTER A STEP BY STEP INSTALLATION WITH KB!! MANY THANKS
Sent from my T-Mobile G2 using xda app-developers app
mapheG2 said:
Ive always been running CM roms since I got the phone nearly two years ago, but recently have been reading too many good things about ICS roms. My phone has been laggy as of late, and honestly after nearly 2 years, I wanna see and try something new. I've been reading some stuff about updating 4EXT or something like that. Can someone link me or explain in great details how i do this? What is it? And if I do that, will i still be able to run my old CM rom if i decide the ICS roms arent for me? I dont want to be unable to roll back.
Whats the best ICS roms out there right now?
Many thanks!
Sent from my T-Mobile G2 using xda app-developers app
Click to expand...
Click to collapse
Depends on your definition of best, personally I like EliteMod ICS (in my signature) but you may want to try out Andromadus Mimicry 1.3.0, it's pretty nice out of the box and has a graphical installer (aroma).
Just be aware that due to the fact that the Desire-Z/G2 does not have an official ICS release, that some things such as hardware drivers have their limits.
1) Camera drivers are not fully available, so the camera won't function as well as it would have on a GB rom.
2) No Wireless-N, also due to drivers, but Wifi-B/G are available.
and a number of other smaller issues which are mentioned varying on the roms, but the two above are the most common complaints, something to keep in mind before you start updating the thread about lack of it.
4EXT Recovery is just another recovery, like ClockworkMod is another recovery.
I personally prefer 4EXT Touch Recovery ( http://www.4ext.net/ has the app to install it ), but both ClockworkMod (what you may have now) and 4EXT can create backups, and restore your backups to the phone (just make sure you do a factory-reset/wipe cache, when you're flashing a brand new rom on, and when you wish to restore a backup.)
So i can flash ics roms with clock work mod and not use 4ext?
Sent from my T-Mobile G2 using xda app-developers app
mapheG2 said:
So i can flash ics roms with clock work mod and not use 4ext?
Sent from my T-Mobile G2 using xda app-developers app
Click to expand...
Click to collapse
You can, they're both recoveries and will both apply a rom zip. I just find 4EXT to have quite a bit more features that pertain to ICS (i.e.: the ability to convert some of your partitions from the older ext3 filesystem to the ext4 filesystem which is better, but not all roms support it, most ICS roms do though), as well as the ability to do tar-based backups (compresses, smaller backup size), and the paid version of the app lets you configure a number of settings in 4EXT (much like the paid version of Rom Manager).
Just don't flash roms via the app, always do that from the actual recovery, or you risk causing problems.
Generally speaking: Reboot into recovery (you can do this from the power menu in CM7.2)
1) Perform a backup of your currently installed Rom to the SD card
2) (toggle USB storage and copy over the rom zip if you haven't already done so)
3) Perform a Factory Reset/Wipe and wipe cache
4) Goto Apply zip from SD Card and select the new ROM
5) Flash any additional zips you want on top, google apps, wifi calling, etc (note the thread for any specifics, for example Mimicry doesn't come with Google Apps so need to flash the ICS google apps if you want them, where as EliteMod includes a custom set of google apps already)
6) reboot and enjoy.
If you decide you don't like it, just repeat the above steps, just do a restore at #4 and reboot.
Both of the ones I mentioned (mimicry, elitemod) by no means require a swap partition or sd-ext partition, but you can partition the card via either clockworkmod or 4EXT, just skip the sd-ext2 option (since elitemod doesn't support a secondary one [and not much point either). And don't set a sd-ext size less than 1.5GB (no sense in making it smaller than your /data partition).
For both though, skipping an SD swap is advised, I only have SD swap on mine cuz no other rom I know of supports dataswap and I'd rather have my SD Card partitioned already to test out other roms than to re-do the SD Card each time (since you gota make sure to back up the content of the SD Card to the PC). 4EXT though will let you repartition the SD card without erasing the FAT32 partition, where as clockworkmod will always wipe the whole card before repartitioning (it's just easier to partition from scratch though).
Yeah the whole partition and swapping was the confusing part. But good to hear I don't have to do any of that. I did see the gapps zip included in the mimicry thread, but where can I find a wifi calling apk to install? Also +1 thanks to u for the detailed reply! Thanks!
Sent from my T-Mobile G2 using xda app-developers app
mapheG2 said:
Yeah the whole partition and swapping was the confusing part. But good to hear I don't have to do any of that. I did see the gapps zip included in the mimicry thread, but where can I find a wifi calling apk to install? Also +1 thanks to u for the detailed reply! Thanks!
Sent from my T-Mobile G2 using xda app-developers app
Click to expand...
Click to collapse
In Mimicry the Aroma installer will actually let you pick that option during the graphical install. It's one of those roms that presents you with a nice installation menu after you select the zip to be applied. Just bear in mind though you need the 26.13.04.19 radio in order to use the T-Mobile Wifi calling app (and course be on T-Mobile). EDIT If you're one of those people who end up getting no WIFI at all after flashing the Wifi calling app from the aroma installer and have the 26.13.04.19 radio, in the first post of the mimicry thread there's a mention of a Wifi-Fix app you can install that might be able to fix that.
For EliteMod ICS, you would apply it by downloading the zip in my signature (for the wifi calling) and flashing that after flashing the rom. But again, needs the 26.13.04.19 radio, as the app won't work with an old radio (26.03.*)
The thread on applying the radio is also linked from my signature , if you're on a T-Mobile G2, you can just grab the first 26.13.04.19 zip file, rename it PC10IMG.zip just like the instructions say there, put it on the SD Card, reboot into the boot loader and apply the radio. Also if you're planning on flashing either mimicry or Elitemod immediately after flashing the new radio, both roms already Clean your EFS partition for you when you install them in recovery, so you don't have to run the EFS wipe zip (something you normally need to flash in recovery after changing a radio).
KB suggested EliteMOD to me a few days ago,...... Gota say it is running vnice at the moment, highly recommend it. w/ SD EXT, no swap.
I downloaded the zip file from the Andromadus thread, and proceeded to flash the ROM. It says the flash was successful, however upon rebooting, I would see the HTC screen but it would never make it to the boot animation. I would just get a black screen. I tried flashing through ClockWorldMod v5. I cleared all data and caches, and then flashed the ROM.. still not working?
mapheG2 said:
I downloaded the zip file from the Andromadus thread, and proceeded to flash the ROM. It says the flash was successful, however upon rebooting, I would see the HTC screen but it would never make it to the boot animation. I would just get a black screen. I tried flashing through ClockWorldMod v5. I cleared all data and caches, and then flashed the ROM.. still not working?
Click to expand...
Click to collapse
What's the exact details of your phone, i.e.: hboot information and radio version.
I flashed the radio from your signature. Hboot information: 0.82.0000
blkjack said I needed to do a superwipe. If that is the case, how would I perform one?
mapheG2 said:
I flashed the radio from your signature. Hboot information: 0.82.0000
blkjack said I needed to do a superwipe. If that is the case, how would I perform one?
Click to expand...
Click to collapse
hboot in my signature is a 0.84.2000 which is a desire-z engineering hboot.
0.82.000 would be an S-ON hboot which you wouldn't be able to change much at all. (which would be odd if you managed to get the 26.13.04.19 radio flashed, while S-On since it wouldn't normally allow you to).
May want to reboot into the boot loader mode and verify all your hboot information.
kbeezie said:
hboot in my signature is a 0.84.2000 which is a desire-z engineering hboot.
0.82.000 would be an S-ON hboot which you wouldn't be able to change much at all. (which would be odd if you managed to get the 26.13.04.19 radio flashed, while S-On since it wouldn't normally allow you to).
May want to reboot into the boot loader mode and verify all your hboot information.
Click to expand...
Click to collapse
I flashed a radio in the past. And it clearly says I have S-OFF on the top. I had the (26.03.02.26) radio before. And it did successfully flash the radio linked from your signature. HBoot says 0.82.0000. Where to go now?
EDIT: I found this link (http://forum.xda-developers.com/showthread.php?t=1044992) but dunno if this is outdated or not. If not, which of the three files do I want?
mapheG2 said:
I flashed a radio in the past. And it clearly says I have S-OFF on the top. I had the (26.03.02.26) radio before. And it did successfully flash the radio linked from your signature. HBoot says 0.82.0000. Where to go now?
EDIT: I found this link (http://forum.xda-developers.com/showthread.php?t=1044992) but dunno if this is outdated or not. If not, which of the three files do I want?
Click to expand...
Click to collapse
I think, the -=SuperWipeG2+=-.zip should be the right one, but as I'm not sure, I did a quick Google search for you and found this:
EdKeys said:
I recently flashed the new 4EXT Mod of ClockworkMod Recovery. The 4EXT Recovery is based off of Koush's CWM Recovery but offers additional power options, one of which is the ability to show the file system format your partitions are formatted in. To my surprise my system was formatted in the Ext 4 format and my data and cache partitions were formatted in Ext 3. The new 4EXT Recovery offers the option to convert the format without deleting any of the data. Your ROM will stay intact after the conversion. I selected that option and changed my data and cache partitions to ext 4 to match my system, rebooted, and notice quite an improvement in speed and smoothness in my current CM7 Nightly. After looking into it further I found out that the SuperwipeG2 that many of us have been flashing is formatting our partitions in the Ext 3 format. The reason only my system was formatted in ext 4 is because I used ClockworkMod Recovery the last time I did a full wipe to first flash the Superwipe, and then I immediately formatted system again with ClockworkMod Recovery. If you've used SuperwipeG2 to do a wipe, more than likely your system, data, and cache partitions are now Ext 3. You might want to check with your ROM developer to see if your ROM will run on the Ext 4 format. If its a CM7 based ROM, it will.
You can find more information about the Ext 4 format here.
Tsubus has since modified SuperwipeG2 so that it now formats the partitions into ext 4 when you flash it. I've used it and it also includes the EFS wipe. You can find it here. As I said, if there is no reason to wipe right now the new 4EXT Recovery can convert your partitions if you choose if they are in currently Ext 3. At the very least you can see what format they're currently in with 4EXT. I highly recommend it. You can always flash back to CWM Recovery if and when you choose. The partitions will remain Ext 4 once you choose to convert.
UPDATE: Several users have reported that checking partition information with Terminal Emulator is not reliable.
Click to expand...
Click to collapse
This one should definitely be the right one.
Besides that, the problem might also be a bad download, as your symptom fits a known issue in blk_jack's thread:
blk_jack said:
...
Q) After flashing I'm stuck at the HTC logo screen!
A) This is likely the result of a bad download. Check your downloaded md5sum hash against the one listed next to the download link above....
Click to expand...
Click to collapse
I thought it was a bad download too, so I downloaded from one of the mirrors. Still the same problem.
mapheG2 said:
I thought it was a bad download too, so I downloaded from one of the mirrors. Still the same problem.
Click to expand...
Click to collapse
So you did not check the MD5 hash?
Im a bit of a noob and all of this wasnt around when I was flashing CM roms ages ago. How do I do that? Would that fix my issue??
Sent from my T-Mobile G2 using xda app-developers app
mapheG2 said:
Im a bit of a noob and all of this wasnt around when I was flashing CM roms ages ago. How do I do that? Would that fix my issue??
Sent from my T-Mobile G2 using xda app-developers app
Click to expand...
Click to collapse
An MD5 hash is something like a fingerprint of a file and it was definitely there when you first flashed CyanogenMod ROMs. The MD5 hash/sum is used to compare two files because it is possible that a downloaded file is slightly different from the original file due to mistakes that could have happened during transfer. So "checking the MD5 hash" means using a program to calculate that "fingerprint" of your downloaded file and comparing it with the "fingerprint" mentioned in blk_jack's thread. If the file you have downloaded is slightly different, its MD5 hash will be different from the MD5 hash that it should have and thus will be unusable and lead to a phone being stuck at HTC boot logo.
By the way, downloading a file from two different mirrors doesn't exclude the risk of getting a corrupt file.
I ran "md5 update.zip" from my Mac's desktop where the file is located. I was returned MD5 (update.zip) = 2a314e5f1361825c83a354aea38c6c4b .. which matches the md5sum of what was given. What next?
And I noticed you have the same H-Boot information that KB was talking about earlier, so I guess that can't be the problem either. Should I just try to Superwipe?
mapheG2 said:
Ok, so if it is a bad download, how do you remedy it? Because there are only so many options to download the ROM right. And what program are you referring to
Click to expand...
Click to collapse
There are actually lots of programs to calculate an MD5 hash. If you are on Linux it usally is as easy as typing md5sum <path to file> in a shell and reading the output. If you are on Windows, I'd recommend a Google search for "md5 generator" or something like this. Maybe even your recovery is able to calculate a file's MD5 hash - I'm using 4EXT and it definitely is, though I don't know if ClockwordMod is.
You can't remedy a bad download except trying to download it again, hoping that the file will be transferred right.
---------- Post added at 03:10 AM ---------- Previous post was at 03:08 AM ----------
mapheG2 said:
I ran "md5 update.zip" from my Mac's desktop where the file is located. I was returned MD5 (update.zip) = 2a314e5f1361825c83a354aea38c6c4b .. which matches the md5sum of what was given. What next?
And I noticed you have the same H-Boot information that KB was talking about earlier, so I guess that can't be the problem either. Should I just try to Superwipe?
Click to expand...
Click to collapse
Oh, sorry - didn't update the thread's page before submitting my reply.
Just try it, there should be nothing wrong with it.
Okay, I read that I should manually clear all the data and cache first and THEN run the superwipe, followed by installing the ROM right? And I will be downloaded from the thread I listed because I still have ext3 I guess and don't want to deal with a ext4 change right now.
I have recently downgraded my HTC which was T-Mobile Branded. Ruinning android 2.2.2 and had HBOOT 0.93.
I downgraded the phone in order to root it, so i followed this tutorial successfully. It worked fine on downgraded firmware.
http://forum.xda-developers.com/showthread.php?t=696189
I then rooted phone using unrevoked. which was not compaitable with firmware, 2.2.2
I then S-off the phone using Alpha 1.8
I then looked around for some roms, Now the issue is whenever, i attempt to install a rom which involves sense. It installs successfully, but then the bootscreen just continues in a loop.
This can be resolved by restoring back to the downgraded firmware?
Now my question is what is the possible cause of this bootloop and sense roms etc?
any suggestions are much appreciated
You didn't read the instructions carefully. Those Sense roms requires ext partition on the sd card.
via xda app
stankyou said:
You didn't read the instructions carefully. Those Sense roms requires ext partition on the sd card.
via xda app
Click to expand...
Click to collapse
I forgot to mention, with or without partitioning i have no luck. With partition it just freezes at boot screen. Whereas, without partition, it is in a loop.
Yea...first boot can take up to 30 minutes.
Adz1 said:
I forgot to mention, with or without partitioning i have no luck. With partition it just freezes at boot screen. Whereas, without partition, it is in a loop.
Click to expand...
Click to collapse
Did you wipe system partitions prior to flashing? Also did you check what hboot type the rom requires? Stock hboot, cm7r2 hboot, etc.
Try to download Cyanogenmod7 rom here http://get.cm/?device=bravo&type=
Flash this and see if this boots up for you. If you are s-off and is using custom recovery already then you don't really need to go through the whole process again.
stankyou said:
Did you wipe system partitions prior to flashing? Also did you check what hboot type the rom requires? Stock hboot, cm7r2 hboot, etc.
Try to download Cyanogenmod7 rom here http://get.cm/?device=bravo&type=
Flash this and see if this boots up for you. If you are s-off and is using custom recovery already then you don't really need to go through the whole process again.
Click to expand...
Click to collapse
Thanks, for the reply. This is an e.g of the rom sense roms i have tried.
http://forum.xda-developers.com/showthread.php?t=1431908 and runnyrom which both have similar results.
I have just installed Cyanogenmod7 which installs and functions properly.
and have tried this rom which works fine.
http://forum.xda-developers.com/showthread.php?t=1355660
i seem to only face such problems with sense Roms?
I assume the HBOOT is related to the alpha 1.8 which i used to S-OFF.
Im confused as i have the Desire S and have not had such problems before? It normally takes no longer than 5 mins to be up and running with the desire s. However, it seems to be the opposite with this desire?
Tell me what recovery are you using? I haven't used ICS roms in a long while so I'm not sure if it implements the use of sd ext partition out of the box. I feel it's your sd-ext partition (or the lack of it) is the problem.
I suggest to look for 4EXT recovery. It's in the desire forums just do a search. Download the apk and sideload it to your device on a running rom like Cyanogenmod it will replace your current recovery. Use 4ext recovery to partition your sd card. Make sure you backup your sd card to your computer before doing anything.
stankyou said:
Tell me what recovery are you using? I haven't used ICS roms in a long while so I'm not sure if it implements the use of sd ext partition out of the box. I feel it's your sd-ext partition (or the lack of it) is the problem.
I suggest to look for 4EXT recovery. It's in the desire forums just do a search. Download the apk and sideload it to your device on a running rom like Cyanogenmod it will replace your current recovery. Use 4ext recovery to partition your sd card. Make sure you backup your sd card to your computer before doing anything.
Click to expand...
Click to collapse
I just installed 4EXT recover and will post results back.
Just a brief question having just browsed the Alpha webpage http://alpharev.nl/
and have realised a partition table, now i am wondering if that has any influence on the installation of Roms
i Currently have a 1gb Mem partitioned to 126? if this is having effect on it not booting?
just to be sure what partition size would you recommend for sense roms?
thanks
Adz1 said:
I just installed 4EXT recover and will post results back.
Just a brief question having just browsed the Alpha webpage http://alpharev.nl/
and have realised a partition table, now i am wondering if that has any influence on the installation of Roms
i Currently have a 1gb Mem partitioned to 126? if this is having effect on it not booting?
just to be sure what partition size would you recommend for sense roms?
thanks
Click to expand...
Click to collapse
Alpharev is for hboots - Stock, Data++, Cm7r2, Oxgenr2, etc
SD ext - for your sd card. safe bet is to have 1gb-2gb of ext partition size.
If you just have 126mb for your ext partition then obviously you don't have the minimum requirement for Sense roms to run.
stankyou said:
Alpharev is for hboots - Stock, Data++, Cm7r2, Oxgenr2, etc
SD ext - for your sd card. safe bet is to have 1gb-2gb of ext partition size.
If you just have 126mb for your ext partition then obviously you don't have the minimum requirement for Sense roms to run.
Click to expand...
Click to collapse
When partitioning the memory card It asks to create two separate partitions and if i am correct the 3rd time for the exchange memory?
Ill try attempting with a larger memory card. But what would you recommend in terms of the last partition created related to exchange memory?
thanks.
when u goto tools/partition sdcard, choose this, its probably the most common setup for roms -
1024
skip
skip
then choose ext4
and ur done, dont forget backup anything important on sdcard coz it will wipe everything on it.
Sent from my HTC Desire
jmcclue said:
when u goto tools/partition sdcard, choose this, its probably the most common setup for roms -
1024
skip
skip
then choose ext4
and ur done, dont forget backup anything important on sdcard coz it will wipe everything on it.
Sent from my HTC Desire
Click to expand...
Click to collapse
Thanks, ill try this out and post back.
jmcclue said:
when u goto tools/partition sdcard, choose this, its probably the most common setup for roms -
1024
skip
skip
then choose ext4
and ur done, dont forget backup anything important on sdcard coz it will wipe everything on it.
Sent from my HTC Desire
Click to expand...
Click to collapse
Mister "chuck norris' man to the rescue. sorry OP i was busy with theming my rom. :highfive:
stankyou said:
Mister "chuck norris' man to the rescue. sorry OP i was busy with theming my rom. :highfive:
Click to expand...
Click to collapse
lol
Sent from my HTC Desire
jmcclue said:
lol
Sent from my HTC Desire
Click to expand...
Click to collapse
thanks, i did as u suggested and tried this time with a 16gb memory card .i can now install all roms Successfully.