Question about in call screen - Epic 4G Q&A, Help & Troubleshooting

I have always wondered one thing about the in call screen that always pissed me off, the proximity sensor doesn't always work. My question is that why is it that when you receive a phone call you have to swipe to answer or ignore but all it takes to hang up during a call is one simple end call button? Shouldn't it be the other way around? I have accidentally hung up on sooo many people because of this.
Sent from my SPH-D700 using xda premium

Does anyone know of a solution to this?
Sent from my SPH-D700 using xda premium

Related

Weird problem with my phone.

No matter what ROM, I have trouble toggling the power button after a call is made or during a call. It's quite frustrating because I can't disconnect a call sometimes. Anyone came across this problem?
Sent from my SPH-D710 using xda premium
Hmm are you saying your phone won't turn on after a call? Can you explain what exactly your trying to do before the problem occurs
I make a call and when it's in progress, it's very hard to.turn the screen on. Maybe that's more specific.
Sent from my SPH-D710 using xda premium
The screen turns off during a call when you have the phone by your face due to the proximity sensor to the left of the speaker grill. Pulling the phone away from your face should turn the screen back on automatically.
Sent from my SPH-D710 using Tapatalk 2
satur9ine said:
The screen turns off during a call when you have the phone by your face due to the proximity sensor to the left of the speaker grill. Pulling the phone away from your face should turn the screen back on automatically.
Sent from my SPH-D710 using Tapatalk 2
Click to expand...
Click to collapse
Yup, was going to say that.
I feel like such an idiot...fairly new to this phone.
Sent from my SPH-D710 using xda premium
Did you figure this out?
Please provide us with more info. What other ROMs have you been running?
As a reference, have you tried to one-click odin back to stock roooted to see if the stock rom reacts the same way?
Edit: To the left of the speaker at the top of the phone, is that entire area clean and unobstructed? This is where the proximity sensor is located. Do not block that area with your finger by mistake while on the phone also. (Who knows the guy might have REALLY big hands)
theres an app in the market for adjusting the proximity delay...and putting the phone on speaker disables the sensor all together!
kurtiskobain said:
theres an app in the market for adjusting the proximity delay...and putting the phone on speaker disables the sensor all together!
Click to expand...
Click to collapse
As well as using a headset!

End call in conference

DOES ANYONE KNOW HOW TO END ONE CALL WITHOUT ENDING ALL CALLS IN CONFERENCE CALLING.... EVERY TIME I'M IN A CONFERENCE CALL OR 3 WAY CALLING SO TO SPEAK SOMEONE HANGS UP IT TIES UP MY LINE SHOULD'T THAT PART OF THE LINE FREE UP ONE THAT SINGLE CALL HAS ENDED AND NOT HAVE TO END BOTH CALLS CALL THE OTHER PERSON BACK JUST TO FINISH
A CONVERSATION.....SMDH
This is a feature phones been missing since my Palm Treo days. That was the last phone I've ever had with a flash button and option to end just one line on a conference call. If you find a way please share lol
Sent from my SPH-D710 using xda app-developers app
No idea but would be a nice feature. Hey is your caps lock key broken and stuck in the on position?
Sent from my SPH-D710 using xda app-developers app
This would be a nice feature to have. I find myself in frequent conference calls for both business and talking with friends.
Caps lock....lol
brooksyx said:
No idea but would be a nice feature. Hey is your caps lock key broken and stuck in the on position?
Sent from my SPH-D710 using xda app-developers app
Click to expand...
Click to collapse
Sorry about that, no it's not stuck i'm at work and I was trying to be quick and discreet about it....lol

Screen Goes Dark During Call

Has anyone ran into issue where you make a call screen goes dark like it's supposed to however if you want to end call screen won't come back on until call ends on the other side. So if person doesn't answer I have to wait till voice mail picks up and hangs up on me after it times out.
Sent from my SPH-L900 using xda app-developers app
dmehcg said:
Has anyone ran into issue where you make a call screen goes dark like it's supposed to however if you want to end call screen won't come back on until call ends on the other side. So if person doesn't answer I have to wait till voice mail picks up and hangs up on me after it times out.
Sent from my SPH-L900 using xda app-developers app
Click to expand...
Click to collapse
Tried the power or the home button ?
Is your fone rooted ?
HyperDroidJBXv1.4 powered GT-n7100 nitro injected by RedPill ref.0.11 and pimped by Afroguide
It generally happens when I put it on my ear. Otherwise it is always on.
Sent From Samsung's Galaxy Note II Using Internet
Phone isn't rooted. I have tried to hit all the buttons including power to turn it back on after it dims out and still nothing. I'm thinking of doing business factory reset but I rather avoid it if I could.
Sent from my SPH-L900 using xda app-developers app
Maybe that's the end solution
Sent From Samsung's Galaxy Note II Using Internet
That's what I figure, thanks for feedback
Sent from my SPH-L900 using xda app-developers app
It happens when you place your finger or any part of the body near the sensor.
Sent from my GT-P7500 using xda premium
Got a screen protect covering the proximity sensor? Yours might be too sensitive. I had the same problem with my n4. Solution was no protector or wait till dearth or whatever brand you use to not cover the sensor. That was the first and only phone I ever had that issue though.
Sent from my GT-N7100
Did reset still same issue. I'll try without case, however I have had no issues with case till now.
Sent from my SPH-L900 using xda app-developers app
Also heard of this bug in a German Android forum: there have been some users reporting the same problem without screen protector or case. Still don't know why this happened but You're not the only one with this bug
Handschriftlich von meinem Note 2 gesendet
I too face this problm when on 4.1.1, temporary solution was using power button..
After update 4.1.2, problem gone!!
Sent from my GT-N7100 using xda app-developers app
I have this problem on my rooted 4.1.2 without any kind of cover.
Sent from my GT-N7105 using Tapatalk 2
You can always go into the accessibility settings and set the phone to end a call when you hit the power button
Sent from my GT-N7100 using xda premium
D3_ said:
You can always go into the accessibility settings and set the phone to end a call when you hit the power button
Sent from my GT-N7100 using xda premium
Click to expand...
Click to collapse
Yesterday I wanted to read a numberplate from a picture to the person I was talking to. Had to text it to him later because the screen wouldn't turn on.
Sent from my GT-N7105 using Tapatalk 2
It's really frustrating! Makes me not want to make any fone calls
Sent from my SPH-L900 using xda app-developers app
Enter *#0*# in the keypad to open the "test menu".
Press the Sensor tile and test your proximity sensor's function bij moving a finger over it.
If it does not change value from 0 to 1 and make the screen go green, your proximity sensor is likely to be broken.
Replacing the front camera (which houses the proximity senor) will then fix your problem.
dmehcg said:
Has anyone ran into issue where you make a call screen goes dark like it's supposed to however if you want to end call screen won't come back on until call ends on the other side. So if person doesn't answer I have to wait till voice mail picks up and hangs up on me after it times out.
Sent from my SPH-L900 using xda app-developers app
Click to expand...
Click to collapse
press the home button or power button
I went into store today to speak to a tech that used to work with when I was a sales rep @ sprint. He told he has seen issue a couple of times. He says when that happens its a sensor issue. More common with fones that where 1st shipped out. He could of replaced it if I wanted but he wanted to avoid giving me a refurb. He did a couple of tests and it's been working since. He suggested if it happens again to bring it back again.
Sent from my SPH-L900 using xda app-developers app
ronin1973 said:
Enter *#0*# in the keypad to open the "test menu".
Press the Sensor tile and test your proximity sensor's function bij moving a finger over it.
If it does not change value from 0 to 1 and make the screen go green, your proximity sensor is likely to be broken.
Replacing the front camera (which houses the proximity senor) will then fix your problem.
Click to expand...
Click to collapse
Works after a reboot. Seems to be the solution to every problem with that sensor.
Sent from my GT-N7105 using Tapatalk 2
I admit this is sometimes frustrating for me too. I'm curious as to a quick fix.

[Q] Screen won't wake up during calls

Ever since I went to MC2 (rooted stock) from LP7, this has been an extremely irritating problem. Every time I make a call, either through the dialer, or through Skype, once the screen times out, it can never be woken up. That means I cannot hang up the call or use the keypad, etc.
This is outrageously annoying. I have tried changing the inactivity timeout as well as smart-stay-awake but no matter what I am stuck with this stupid problem. Has anyone else seen this and know how to fix it?
Most likely a faulty proximity sensor.
Sent from my SPH-L900 using xda app-developers app
Open your phone and blow air near the proximity sensor
Sent from my SPH-L900 using xda app-developers app
49ml said:
Open your phone and blow air near the proximity sensor
Sent from my SPH-L900 using xda app-developers app
Click to expand...
Click to collapse
Or just fix the motion settings.
I had the same issue. I had to unroot and take it to sprint 2 days ago and they replaced the screen and is good now
SGNote2

Proximity sensor and phonecalls.

Why when I press dial the screen turns off right away? The screen should only turn off when I put it next to my ear. It's very annoying when I'm dialing automated systems and need to use the keypad because if I manually turn the screen back on and then put it next to my ear to talk the screen doesn't turn off and I end up accidentally pushing buttons.
On an iphone the screen remains on and only turns of when put next to my ear, and turns right back on when pulled away from an ear. Is there a way to duplicate this behavior on GS4?
Go to settings/My device/call settings and select turn off screen during calls. That should do it.
Sent from my SGH-M919 using xda app-developers app
Thanks, the screen doesn't turn off anymore but it also stays on when I put it next to my ear... I don't get why Samsung can't get a basic function like that right.
Sent from my SGH-M919 using xda app-developers app
re: proximity sensor
ilogik said:
Why when I press dial the screen turns off right away? The screen should only turn off when I put it next to my ear. It's very annoying when I'm dialing automated systems and need to use the keypad because if I manually turn the screen back on and then put it next to my ear to talk the screen doesn't turn off and I end up accidentally pushing buttons.
On an iphone the screen remains on and only turns of when put next to my ear, and turns right back on when pulled away from an ear. Is there a way to duplicate this behavior on GS4?
Click to expand...
Click to collapse
In your original post you forgot to let us know what exact rom you are using.
It would be very helpful to know that and other specifics before offering any suggestions.
Good luck!
Well, I tried this on a stock rom with the same result. Are you saying it works for you?
Sent from my SGH-M919 using xda app-developers app
ilogik said:
Why when I press dial the screen turns off right away? The screen should only turn off when I put it next to my ear. It's very annoying when I'm dialing automated systems and need to use the keypad because if I manually turn the screen back on and then put it next to my ear to talk the screen doesn't turn off and I end up accidentally pushing buttons.
On an iphone the screen remains on and only turns of when put next to my ear, and turns right back on when pulled away from an ear. Is there a way to duplicate this behavior on GS4?
Click to expand...
Click to collapse
Download an app from the android market (its free) called AndroSensor and see if that app is saying the proximity sensor is blocked. You might have a spec of dirt causing it to always return that its blocked. Read other threads with same issue, and in the one thread, the guy at T-Mobile took a can of compressed air and blasted out the earpiece and it fixed it.
I downloaded the app and proximity sensor does not show any reading all the other functions have a graph next to them but not the sensor. Does this mean it's broken? And if it is broken does tmobile exchange the phone or do I have to send it back to Samsung?
Sent from my SGH-M919 using xda app-developers app
ilogik said:
I downloaded the app and proximity sensor does not show any reading all the other functions have a graph next to them but not the sensor. Does this mean it's broken? And if it is broken does tmobile exchange the phone or do I have to send it back to Samsung?
Sent from my SGH-M919 using xda app-developers app
Click to expand...
Click to collapse
Screenshot? Mine says "waiting for event" then after I put my hand over the sensor it changed it's value (but stayed on 0.0) something is wrong with my sensor obviously lol
Sent from my SGH-M919 using Tapatalk
No values change no matter what I try.
Sent from my SGH-M919 using xda app-developers app
ilogik said:
View attachment 2482455
No values change no matter what I try.
Sent from my SGH-M919 using xda app-developers app
Click to expand...
Click to collapse
It's definitely a hardware issue which should be covered. You just gotta make sure you get it back to stock and reset your counter with triangle away.
Sent from my SGH-M919 using xda app-developers app
ilogik said:
View attachment 2482455
No values change no matter what I try.
Sent from my SGH-M919 using xda app-developers app
Click to expand...
Click to collapse
Agreed. Definitely hardware. Your sensor is reporting that the sensor is never covered and always open. Use that app and a test call to show the Rep at T-Mobile.
Sent from my SGH-M919 using Tapatalk
Went to t mobile store, flirted with the chick and she overnighted a new phone without even looking at mine...
Sent from my SGH-M919 using xda app-developers app

Categories

Resources