I know there is a thread about the screen but im taking here about the, front cover, middle chassis, and back cover its here h t t p:// shop.brando.com/samsung-galaxy-s-ii-replacement-housing-white_p06383c1290d011.html
i dont want to destroy my phone
yeah same here i wouldnt mind a tutorial if some one has done it before.. as i have cracked mine...but dont want to try and take teh screen off without a bit of know how....
Anyone can help us both....pleeease
Search button search button it works...
Its easy to replace if you have the skills to as many have found out the hard way...
Check ifixit, there is a tear down there I think.
Dont just try to replace the screen, get one that comes with the surrounding fascia.
Ive tried both and it is a complete ***** to separate the screen from the fascia. They cost about the same as well.
Related
Using my htc device suddenly touch screen went off and i could'nt use the stylus at all. The strange thing is that all of the other keys are working good. I tried hard reset the device but nothing happened. Now im stuck in the screen "tap the sreen to set up your windows mobile based device. Can anyone please help? Before the appearence of the above problem i was using google maps, if this helps.
many thanks
Does t have a crack in it? If so then it needs changing, if not then probably the ribbon has come out. Is it under warranty?
no there is nt any crack! everything was good and suddenly while i was tapping to check some maps, stopped.
Sorry for asking but ribbon is that thing above the screen? Is it possible to come out so soon? (6 months). and finally does the warranty covers ribbon change?
Sorry for the above questions but i really dont know what to do!
many thanks
call the company where you buy it from and ask them
savrol said:
no there is nt any crack! everything was good and suddenly while i was tapping to check some maps, stopped.
Sorry for asking but ribbon is that thing above the screen? Is it possible to come out so soon? (6 months). and finally does the warranty covers ribbon change?
Sorry for the above questions but i really dont know what to do!
many thanks
Click to expand...
Click to collapse
If it's only 6 mths old it shoud be under warranty, so take it back to the place you ought it.
If you are determined to try to fix it yourself you have to do the following.
Remove the battery cover & battery.
Remove the 4 small screws
Remove the back-case by running your fingernail round the gap (hard 1st time then easy after that)
Remove 4 more screws
Remove front-case from the middle
Remove the motherboard assembly from the front case and unplug the screen/digitiser assembly, carefully pull that off the motherboard (again not easy 1st time).
You will now see the small digitiser ribbon at the bottom coming off the digitiser and disappearing into the bottom of the screen. It's very easy to take out and not easy to put back in. I use some flat-bladed tweezers to do mine but sometimes it takes a couple of tries. Obviously it's much easier if you are fitting a new digitiser because it's not fixed to the screen like yours will be. If you try to remove the digitiser chances are you will crack it. I re-fitted mine after removing my broken one by using thin cut strips of double-sided tape.
Before you do anything else, just clean with sharp knive or razor between the screen and the cover.You will be surprised how much rubish is is in there.
this things are keeping the screen pressed.
Hope it helps
many thanx 4 the instrustions guys. i'll try that. if everything ok i'll inform you. if not i'll give you my bank account number to deposit money in order to buy a new one.
many thanx again
i need to take apart my ks20. want to repaint the chrome like frame that goes around the phone (lg used some cheap paint, it comes off really easy). I have looked at the service manual, but couldn't get anywhere. After taking out the battery and sim card, there are to screws on top that i removed, i tried to remove the back plastic cover (the one with the camera opening) and no luck, it doesn't budge.
does someone know how to do this? i think the service manual is somewhere on the site, but i have no idea how to proceed.
thanx a lot
Try
http://rapidshare.de/files/38526183/EN_KS20_SVC_ENG_1123_1.0_.pdf.html
thanx for the link, but i have looked at the manual and can't make up anything of it
it doesn't say how to go about taking it apart, all it shows is a diagram with all the pieces
is there anyone here who knows or at least has an idea about this, i really need to get it repainted (i hate scratched phones)
thanx a lot
Maybe some one can answer this question? I also need to disassemble my KS20 - because of dirt on camera lens...
The disassembly is fairly straightforward - remove the battery, remove the visible screws, run a special tool along the black plastic and unclip. It's not easy, but it will come off. The back cover houses thermal pad, because KS20 gets quite hot from time to time. I guess LG didn't anticipate that happening, so the pad is a bit of a last resort solution from them, quite unorthodox.
As far as middle silver strip is concerned, it houses a flex, so unless you know what you are doing - don't bother touching beyond the back cover.
hi, i dissambled my ks20 today.. and i think there's a problem...
my screen wont turn on anymore...there are still sounds and even the touch screen is working..its just that my screen is not showing anything...
i think the connection between the screen and the motherboard was loose...
but then again, i cannot find the connector... can someone help me with this...
Hi,
Read this KS20
By.
tqso much....
i just receive my digitizer today... but i have no idea to repair it myself...can u guide me?
We took my ks20 apart. The screen opened up a bit when it was removed, so perhaps it's broken. We did manage to get the digitizer off however..
Problem is the digitizer was glued with a helluva lot of glue. How will we get it to stick when we put it back? I read some use double-sided tape, but won't that be way too thick?
Glue seems to be the only solution, but what kind and how much? The screen also seemed to have been glued in place.
Will any kind of super glue work? Only a couple of drops perhaps? I'm pretty sure the phone won't be tight after this but..
Anyone who's done this procedure.. What did you use? We're gonna finish this tomorrow so I'm very grateful for any advice.
bump
This is important.
over the past few weeks some of the buttons (namely left soft key, up and left) have stopped working, i've tried numerous roms just incase but it's definatley a hardware issue, now, i've dismanted the phone using the diamantos guide to see if anything jumps out at me, gave the phone a damn good cleaning whilst i had the chance, put it back together....but nothing, everything seems to be in order, all components in their rightful place but i still cant work it out, does anyone know if this is a common problem or if theres a fix as i've been unsuccessful in my searches.
actually, i just found the solution and it worked a treat, thanks anyway people.
btw, if anyone would like to know what i did then i'll be more than happy to share the solution.
godofwap said:
actually, i just found the solution and it worked a treat, thanks anyway people.
btw, if anyone would like to know what i did then i'll be more than happy to share the solution.
Click to expand...
Click to collapse
I'll be more than happy
please share your solution with us, I have the exact same problem
ok, no problem, heres what i did.
before you start please be aware that this is a very delicate procedure and you should take care as this may naff up your beloved trinity.
ok, i first disassembled my trinity using the dimantos guide located here http://forum.xda-developers.com/showthread.php?t=311463,
now, when you get to the keyboard / button pcb take it out if, you look closely you'll notice theres a thin adhesive plastic cover covering the metalic buttons, very very carefull peel this back (i used a sharp knife to get to it), making sure not to completely remove it, try to only expose the underneath of the buttons in question, you'll see that the buttons come away with the plasic leaving the underneath exposed, now, using a cotton bud and some lightly applied alcohol clean the contacts then when all is done, replace the plastic and make sure its firmly pressed back down you may notice it making a different, kind of sharper clicking noise when depressed than before meaning its worked, repeat for all buttons.
i think whats going on here is the gum or glue from the plastic film has "leaked" if you will, onto the plates meaning theres no contact from the buttons, this would also account for the very slight change in sound when you now press the button.
i found this info here http://forum.xda-developers.com/archive/index.php/t-289737.html
i have the same problem with the front hardware keys. They last around 1 year, i had them changed under warranty the first time but now they are failing again.
Thank you! now i just have check for tools and some courage because i fear damaging my good old trinity.
temp9300 said:
i have the same problem with the front hardware keys. They last around 1 year, i had them changed under warranty the first time but now they are failing again.
Thank you! now i just have check for tools and some courage because i fear damaging my good old trinity.
Click to expand...
Click to collapse
....hi to all dear friends!!after half an year of very hard work my trinity has the same problem....only central botton working but,the superior two,works if I do an hard reset!very strange!changing a lot of different roms,from w 5 to w 6.5 the problems doesn't solve...!
- I'd like to make your same operation but I'd like to know first if you too have they working on hard reset before trying....
thanks a lot and merry christmas!
yes, even after a hard reset they work for me, its as if it was brand new, bare in mind you may have a different problem so if your gonna try this, TAKE YOUR TIME.
godofwap said:
now, when you get to the keyboard / button pcb take it out if, you look closely you'll notice theres a thin adhesive plastic cover covering the metalic buttons, very very carefull peel this back (i used a sharp knife to get to it), making sure not to completely remove it, try to only expose the underneath of the buttons in question, you'll see that the buttons come away with the plasic leaving the underneath exposed, now, using a cotton bud and some lightly applied alcohol clean the contacts then
Click to expand...
Click to collapse
I tried doing this but found no plastic cover above the metallic buttons. Maybe it's because mine went for repair with this problem before, dunno.
I don't think i can mess with the metallic part so i guess i'm stuck with this unless i buy a new keyboard.
it's more of a very very thin laminate, like sticky back plastic than a cover, it should definately be there unless they replaced the PCB with a different model, otherwise the metalic buttons would just fall away. Again, they may have used a different version of the PCB. You can actually buy the PCB and replace it yourself. (here http://cnn.cn/shop/p3600dopod-d810-keypad-p-1825.html )
So, I had my phone sitting on my work truck and I watched as it slid and flipped over and smacked the concrete. I have a good case and have dropped it before with no repercussions but this time it just shattered the screen. No big deal, hopped on Amazon and ordered a new one for about $24.
Got here today and I eagerly took my phone apart. Followed a video and had no troubles until I got to the step of actually taking out the screen. My evo had quite a bit of adhesive and being that the screen was already shattered, I had a hell of a time getting it out. Well, I seen the LCD was all bent and messed up too but I still put the new screen in and sure enough, half my screen doesn't work.
So...if I order a LCD, take it back apart and put it in along with the new screen everything should work fine again, correct? Also, do I need to order those glue strips or is there something else I can use to hold it all in place. Sorry if this seems stupid but I'm just a little irritated that I ordered one piece when I really needed another as well and I'm just at the point where I feel like buying a new one off Craigslist will be easier. Thanks in advance
Sometimes buying a new one can be better/easier but if you're capable of replacing it yourself why not lol. Just make sure you order the right part for your particular evo......
Check this out!
http://www.youtube.com/watch?v=jFmt6aLEWag&feature=youtube_gdata_player
Sent from my PC36100
first, it's hell to get the digitizer (the part you actually touch) attached back on to the rest of the screen. it would be better and easier to buy the whole lcd/digitizer front for the phone.
BUT MAKE SURE YOU BUY THE RIGHT LCD SCREEN: theres two different kinds, narrow strip, and long strip.
whatsuphomie said:
first, it's hell to get the digitizer (the part you actually touch) attached back on to the rest of the screen. it would be better and easier to buy the whole lcd/digitizer front for the phone.
BUT MAKE SURE YOU BUY THE RIGHT LCD SCREEN: theres two different kinds, narrow strip, and long strip.
Click to expand...
Click to collapse
Anyone know if theres an easy way to tell which kind of strip you have without having to open up the phone?
bizdady said:
Anyone know if theres an easy way to tell which kind of strip you have without having to open up the phone?
Click to expand...
Click to collapse
I need the same answer but I guess the answer is no
I don't know if there is a way but opening up the phone to find out is really easy. I'd you go to ifixit.com they have the instructions.
subprime said:
I don't know if there is a way but opening up the phone to find out is really easy. I'd you go to ifixit.com they have the instructions.
Click to expand...
Click to collapse
could you link to the Ifixit article?
Also, does anyone know where to get the best deal on an lcd/digitizer once I find out which one I need?
The screen of the my lg g3 Broke
I want to buy original screen of lg... And I want to fix alone, Accompanied by guidance in Web, YouTube or something.
So... has in ebay or aliexpres original Screen for sale?
And what i should order? Just a screen or "touch" also ?
How does it work?
thank you :good:
Its not hard to do. I bought Lcd and front bezel together with screwdrivers and guitar pick for 55eur on eBay
It's obvious a screen that failed lg quality testing as it's a bit imprecise
Grand mostly tho
But do take care with speakers etc
And you'll need a hairdryer
If u have some experience of soldering and know how of internals then go for it otherwise give it some certified technician ... U can damage internals on ur own
Just buy the complete screen assembly from somewhere like etradesupply and swap that out.
Will save you the most headache in the end trust me...
Search my G2 screen replacement thread if you have some time...think you may like it