Related
Hey guys, i got this in a few days ago so I can verify it fits the MOTOROLA DROID X not the Samsung that the description says.
You can even tell by the part # that it is made for the DROID X. Why Verizon has it screwed up I dont know, but it is the ONLY face-in snap-in holster I have found.
http://www.verizonwireless.com/b2c/store/accessory?action=accessoryDetails&accessoryId=46229
Enjoy, I will post pics of it on my phone in a bit.
They have a better one that comes with a back shel also
It is called shell/holster combo for $30
Sent from my DROIDX using Tapatalk
I have the holster. It's a little flimsy and I'm probably going to replace it with the Seidio. As for the holster shell combo, it sucks. I had it for my incredible and it gets loose.
Sent from my DROIDX
Check out this one...
http://store.androidcentral.com/verizon-shell--holster-combo/4A24A7318.htm
I like that better because it comes with the protective case, and its a clip on.
That's the one I had, it's made by Amzer. It doesn't protect the top of the device either. Mine fell out of the holster and dinged up the top of my phone.
Yourrid said:
Check out this one...
...store.androidcentral.com/verizon-shell--holster-combo/4A24A7318.htm
I like that better because it comes with the protective case, and its a clip on.
Click to expand...
Click to collapse
I have this one and hope it loosens up over time. Right now, it takes two hands to get the phone out of the holster because it's so tight. It works great for me though, no worrying about the phone falling out of the holster.
SW
SideWynder said:
I have this one and hope it loosens up over time. Right now, it takes two hands to get the phone out of the holster because it's so tight. It works great for me though, no worrying about the phone falling out of the holster.
SW
Click to expand...
Click to collapse
I might have to get this one then, if its that tight.
I work at an auto parts store so im constantly moving around, brushing up against greasy things or crawling under people's cars so I need some protection for my phone. How is the quality of the case?
Also, does the case wrap around the front of the phone? I mean if I lay the phone face down will the screen touch or will the case protect it?
Yes, the case does wrap around the front enough to keep the glass off the counter when you lay it down. Both the shell and the hoster are rigid with a rubberized feel.
It doesn't add a lot of bulk to the phone like some cases I've looked at, so the phone is pocketable when you want to go without the holster.
I picked mine up in my Verizon store, so would recommend you stop at one and ask to see it on an X.
SideWynder said:
Yes, the case does wrap around the front enough to keep the glass off the counter when you lay it down. Both the shell and the hoster are rigid with a rubberized feel.
It doesn't add a lot of bulk to the phone like some cases I've looked at, so the phone is pocketable when you want to go without the holster.
I picked mine up in my Verizon store, so would recommend you stop at one and ask to see it on an X.
Click to expand...
Click to collapse
yea im going out tomorrow to buy that thing. it was exactly what I was looking for... I need a good screen protector too, as i usually have dirt and grime on my hands from dealing with car parts. I heard Vzw screen protectors suck and dont even cover the whole glass. Any recommendations?
Yourrid said:
yea im going out tomorrow to buy that thing. it was exactly what I was looking for... I need a good screen protector too, as i usually have dirt and grime on my hands from dealing with car parts. I heard Vzw screen protectors suck and dont even cover the whole glass. Any recommendations?
Click to expand...
Click to collapse
Yes i have this holster. Just picked it up yesterday. And it seems secure and I liked the look and the feel of it in my hand. Just didn't like that it left the top of the phone exposed. In the holster its protected though. Its when you take it out it seems like it could possibly get dinged at the top of the phone if it fell. Otherwise it seems pretty cool. Im looking to see if someone comes out with a holster that includes complete coverage of the phone and holster combo. I think they didn't cover the top because the antenna is located there. Not sure but just a theory.
Yourrid said:
yea im going out tomorrow to buy that thing. it was exactly what I was looking for... I need a good screen protector too, as i usually have dirt and grime on my hands from dealing with car parts. I heard Vzw screen protectors suck and dont even cover the whole glass. Any recommendations?
Click to expand...
Click to collapse
The screen protectors we talk about in this thread (the SGP Crystal Clear ones) are the best by far, and they also have the anti-fingerprint ones too.
http://forum.xda-developers.com/showthread.php?t=738601
Returned the hard silicon one they sell and got me the shell/holster combo. Awsome!
Sent from my DROIDX using XDA App
SideWynder said:
I have this one and hope it loosens up over time. Right now, it takes two hands to get the phone out of the holster because it's so tight.
Click to expand...
Click to collapse
I had a girlfriend like that once
OneStepAhead said:
I had a girlfriend like that once
Click to expand...
Click to collapse
+1 for Hilarity
GoldenCyn said:
Returned the hard silicon one they sell and got me the shell/holster combo. Awsome!
Sent from my DROIDX using XDA App
Click to expand...
Click to collapse
I have that one too but the matte black finish is peeling off very ugly as it does. Love the function exactly what I wanted, but the shiney plastic under the finish looks terrible. Just my two cents.
Sent from my DROIDX using XDA App
I had an idea for a holder that works as a belt buckle a few years ago hahaha
Sent from my DROIDX using xda premium
i use this case it is great i have another similar one for my razr HD
I just picked this up at my local bestbuy. It is the same thing as the Seidio Innocase, just cheaper. I had one of these for my Droid X and loved it. On my X, I also ordered the Seidio Rugged add-on case, and the two worked perfectly together. I think that I am going to do the same thing again. Here is the link http://www.bestbuy.com/site/Platinu...uId=1974606&st=htc thunderbolt case&cp=1&lp=1
One more thing, when I bought the phone I picked up the Double cover from VZW, and it fits perfectly into the holster that I got with the platinum case....
I have the platinum case as well, trying to figure out how to mod it to fit my extended battery.
disorientedmind said:
I have the platinum case as well, trying to figure out how to mod it to fit my extended battery.
Click to expand...
Click to collapse
Dremel
Sent from my ADR6400L using XDA App
civichater said:
I just picked this up at my local bestbuy. It is the same thing as the Seidio Innocase, just cheaper. I had one of these for my Droid X and loved it. On my X, I also ordered the Seidio Rugged add-on case, and the two worked perfectly together. I think that I am going to do the same thing again. Here is the link http://www.bestbuy.com/site/Platinu...uId=1974606&st=htc thunderbolt case&cp=1&lp=1
One more thing, when I bought the phone I picked up the Double cover from VZW, and it fits perfectly into the holster that I got with the platinum case....
Click to expand...
Click to collapse
Maybe I'm missing something but the link says $34.99. I paid $29.99 for my Seidio Innocase.
Sent from my ADR6400L using XDA App
THis is a case and a holster, yes?
JDawg68 said:
THis is a case and a holster, yes?
Click to expand...
Click to collapse
Yes, the one from BB is case and holder. The 29.99 for the Innocase is the case only.
This is identical to the Seido case and holster combo except it is alot cheaper. The case and holster is made by Seido and just branded for Best Buy. Just picked it up.
+1 Just picked this up @ Best Buy for 34.99
It is that nice black matte rubberized coating I love... Batman would approve.
So is this a durable case? Never used those cases before. Might consider this one.
The problem with that is you have to dremel through the lock tab that holds the 2 pieces together.
ddgarcia05 said:
Dremel
Sent from my ADR6400L using XDA App
Click to expand...
Click to collapse
Sent from my ADR6400L using XDA App
thanks for the info on this case going to get one now
I have this case. Its good, but the headphone jack opening could be a little larger.
Thanks to the OP for finding this. Don't know why Seidio doesn't put their name on it, but it's a great case. Nice finish, and a holster if that's your thing. Fantastic deal for 35 bucks plus tax.
Yeah there are a few rebrandings of that case. I also got it from BB. Works like a charm, 2 days after getting the case I was nice and drunk, dropped my phone from about 6 feet onto concrete. It landed directly on the corner and other than a little nick on the case the phone is fine.
I had to google how to get the fing thing off without breaking it though...Easy enough once I did.
bp328i said:
Maybe I'm missing something but the link says $34.99. I paid $29.99 for my Seidio Innocase.
Sent from my ADR6400L using XDA App
Click to expand...
Click to collapse
I payed 10.99
Sent from my ADR6400L using XDA Premium App
I got a discount promo code that is why with shipping it was a total cost of 15 dollars! I was not saying it in a rude way I meant that I just like the one I got better that is all
Sent from my ADR6400L using XDA Premium App
turbosrrgood said:
I had to google how to get the fing thing off
Click to expand...
Click to collapse
How do you get it off? (Link etc.) That little manual that comes with is as useless as tits on a bull, can't read a damned thing. It's like the size of a postage stamp.
I got mine to replace my high gloss silicon case. I love it! Feels nice and durable, and the holster is nice.
To get it off what I do is:
1. Flip the phone over
2. squeeze the sides of the top part of the case, so that it bends in the middle (it's very slight but it gives just enough space to undo the lock)
3. Hold the bottom part of the case and push the seido branding sign down to unlock it and pull the top off.
It's definitely a little frustrating at first trying to get it off but once you get the hang of it, it comes off pretty easily. I've become an expert taking it off due to testing kernels and having to do a battery pull to get back to recovery lmao.
Geez, that was easy once you pointed it out. Good thing as I was planning on going to the music store to pick up a couple of guitar picks to try opening it up. I just want fast access in case the battery starts overheating.
thunderstruck! said:
Geez, that was easy once you pointed it out. Good thing as I was planning on going to the music store to pick up a couple of guitar picks to try opening it up. I just want fast access in case the battery starts overheating.
Click to expand...
Click to collapse
lol glad it worked out for you.
Does anyone know of any I have searched and have only found very few so does anyone know of any good extended battery cases?
Sent from my htc evo 4g. ALL HAIL EVO 3D!!!
seidio's rugged case comes in an extended battery flavor
Vvlioncourtvv said:
Does anyone know of any I have searched and have only found very few so does anyone know of any good extended battery cases?
Sent from my htc evo 4g. ALL HAIL EVO 3D!!!
Click to expand...
Click to collapse
I'm having same issue if u bought a Chinese battery and back door off net like I did u can't use the seidio products sucks only thing I found was a silicone case for it by laza. On Amazon
reaper24 said:
I'm having same issue if u bought a Chinese battery and back door off net like I did u can't use the seidio products sucks only thing I found was a silicone case for it by laza. On Amazon
Click to expand...
Click to collapse
Thats the only one I found as well. Was hoping to find a TPU one.
There was one custom one floating around which I saw on ebay, but i read that it covers the front camera, and some people had problems pressing the buttons.
leeh41 said:
Thats the only one I found as well. Was hoping to find a TPU one.
There was one custom one floating around which I saw on ebay, but i read that it covers the front camera, and some people had problems pressing the buttons.
Click to expand...
Click to collapse
Ya its a pain in the ass to find anything for the aftermarket battery's and doors I ordered a silicone one to help protect my phone just sold my ballistic case sucks cause no holster for the extended batteyr unless u spent 60 on a seidio batt and there gear which is over priced Chinese battery's work just the same if not the same thing my OEM battery from sprint was made in China hope more cases come out so we are not forced to by from one company.
Tpu case on moretalktime.com free shipping. New one coming out with larger openings on April 20±.
Sent from my rooted EVO using tapatalk!
I have a silicon case that I am planning to make two cuts in with a razor which will fit over the extended battery. If only I ever used my extended battery...
The seidio big rugged yada yada yada case works with the chinese extended batteries you just leave the back off your phone. The camera is exposed but its always exposed and the case sits close enough that the battery doesn't fall out.
Sent from my PC36100 using XDA Premium App
P.s. its not really called the yada yada yada I just don't remember its exact name. It comes in four pieces: back, skin, part that snaps over/around skin, and holster. I know thats a lot of technical terms but it gives you the idea.
Sent from the restroom while I'm ducking work.
http://www.amazon.com/gp/product/B004FG30NE
I just bought this yesterday and seemed to be the best price for what you get. The only thing is that they shipped the 80 something cents screen protectors first WTF. I wanted the 80 something dollars worth of cases first. lol Still feel good about this investment.
You can modify the ballistic hc to fit the extended batteries, theres a thread around here somewhere.
Sent from my hand with XDA Premium installed
moretalktime.com has a tpu case for extended battery evo.
Sent from my PC36100 using XDA Premium App
leeh41 said:
Thats the only one I found as well. Was hoping to find a TPU one.
There was one custom one floating around which I saw on ebay, but i read that it covers the front camera, and some people had problems pressing the buttons.
Click to expand...
Click to collapse
yes that's the moretalktime.com one, version 2 is due out in 2 weeks. he has fixed the camera issue on the first batch using a hole punch.
Sent from my PC36100 using XDA Premium App
I modified the Ballist HC but its a lot of work and you risk damaging it. Also I have the Seidio ext rugged and like it. Its built better than the standard rugged and I don't have a problem using the notifications menu bar like I do with the Ballistic. I don't care for the Seidio holster though. Rick
I modified my ballistic as well but the sanding and grinding was more complicated than I thought so I just cut a hole in the back to fit the battery door and I can use my stock kickstand and it looks good with the silicon/ rubber case on top of it. I prefer the seidio locking clip to the ballistic, it gives me more security when I lock the phone in it, I wish the ballist had this.
Sent from my PC36100 using XDA Premium App
bignibb said:
I modified my ballistic as well but the sanding and grinding was more complicated than I thought so I just cut a hole in the back to fit the battery door and I can use my stock kickstand and it looks good with the silicon/ rubber case on top of it. I prefer the seidio locking clip to the ballistic, it gives me more security when I lock the phone in it, I wish the ballist had this.
Sent from my PC36100 using XDA Premium App
Click to expand...
Click to collapse
My issue with the seidio holster is if you have a jacket etc. on it gets caught on the top clip of the holster. Hey there's another reason to move to a warm climate, ha-ha
P.S. good idea with cutting through the back, that would allow me to use the 3500 battery instead of the sprint 2600
I got my hands on both of these cases and did a quick review if anyones interested. I have to say im impressed with the official flip case, its the one i use on a daily basis atm.
http://droid-den.com/accessory-reviews/official-samsung-galaxy-note-flip-cover-review/
http://droid-den.com/accessory-reviews/samsung-galaxy-note-flexishield-case-review/
that is great, i was on the fence with the flip cover for a bit, thank you for going the extra bit and getting both!
I had the craziest of ideas but do you think with a little bit of patience and modding that you would be able to put a slice in the gel case and slip the back cover of the flip case through it and use both?
I am not sure when ill next be able to buy another phone seeing as this one started WWIII at my house and i think i may need to really baby it, i also think if its possible we might be able to use the gel case somehow to hold the flap down, tiny magnets, who knows, im just curious if you think this is possible
Flip Case is great, works like a dream and it's raised case protects the Camera Lens, unlike the factory fitted back, one slight issue is that the Note will not slip into the 'Official' car mount when it is in the Flip case. You can snip a bit from the case to help but due to the extra width (... ;-) ) it stands proud on the one edge.
Samsung naughty designers...
Mrglass86 said:
that is great, i was on the fence with the flip cover for a bit, thank you for going the extra bit and getting both!
I had the craziest of ideas but do you think with a little bit of patience and modding that you would be able to put a slice in the gel case and slip the back cover of the flip case through it and use both?
I am not sure when ill next be able to buy another phone seeing as this one started WWIII at my house and i think i may need to really baby it, i also think if its possible we might be able to use the gel case somehow to hold the flap down, tiny magnets, who knows, im just curious if you think this is possible
Click to expand...
Click to collapse
Ha, I actually tried this but must have forgot to mention it in the review. No modding required it does fit in. The case warps very very slightly on the left side where the flip case joint is, but it works reasonably well though!
Not sure about holding the flap down, but it only slightly lifts itself up, it sometimes lifts very high, but just pressing it down is enough to keep it down
I am thinking about using both cases togather , would you send a picture please for using them togather ?
Been using my flip case for a couple of days. I wasn't sure at first but love it now.
Feels like part of the phone.
Sent from my GT-N7000 using Tapatalk
tamerh said:
I am thinking about using both cases togather , would you send a picture please for using them togather ?
Click to expand...
Click to collapse
+1 to this and also do you like your gel case enough that if you were to buy another it would be that one again or take your chances on one of the other gel cases out there? thanks for trying the two cases together too, im too broke to risk it not working.
Mrglass86 said:
I had the craziest of ideas but do you think with a little bit of patience and modding that you would be able to put a slice in the gel case and slip the back cover of the flip case through it and use both?
Click to expand...
Click to collapse
+1
I'm thinking of just cutting the front flap and glue the side leather on top of the gel cover's side, close to the back cover's side, so it will have full range of motion. Reuse the original backcover for better fit. Then just a tiny velcro patch on the other side to keep it closed.
tamerh said:
I am thinking about using both cases togather , would you send a picture please for using them togather ?
Click to expand...
Click to collapse
Ahh ok, I'll do this tonight
Mrglass86 said:
+1 to this and also do you like your gel case enough that if you were to buy another it would be that one again or take your chances on one of the other gel cases out there? thanks for trying the two cases together too, im too broke to risk it not working.
Click to expand...
Click to collapse
I don't think so, to be honest I'm not really a fan of gel cases anyway so I wouldn't buy any. Flexishield ones are the most popular gel ones tho
tamarian said:
+1
I'm thinking of just cutting the front flap and glue the side leather on top of the gel cover's side, close to the back cover's side, so it will have full range of motion. Reuse the original backcover for better fit. Then just a tiny velcro patch on the other side to keep it closed.
Click to expand...
Click to collapse
Good idea, its better to keep the full range, because I would hate the flip cover if it didn't flip all the way around.
tamarian said:
+1
I'm thinking of just cutting the front flap and glue the side leather on top of the gel cover's side, close to the back cover's side, so it will have full range of motion. Reuse the original backcover for better fit. Then just a tiny velcro patch on the other side to keep it closed.
Click to expand...
Click to collapse
Please post pictures how you do that and what glue you use for it to hold for long time, and look aesthetic.
I would like to do the same probably
been using the flip case for about nearly a month now in tropical weather, and the edges of the flip top have "melted" and become sticky. ugh!
have been using it for the past 3 days since i got my phone, the edges of the thin silicon lining peeled off. Soon the leather cover is gonna go in a matters of weeks.
dan008 said:
have been using it for the past 3 days since i got my phone, the edges of the thin silicon lining peeled off. Soon the leather cover is gonna go in a matters of weeks.
Click to expand...
Click to collapse
Took mine a couple of weeks, and now it's starting. Here's a pic:
ouch, haven't had that with mine yet. Either you guys are rougher than me, or i'm just lucky
Found the original, sealed Samsung flip case on eBay from a US seller for $45 shipped.
Will be here in a few days. I'm stoked!
ericshmerick said:
Found the original, sealed Samsung flip case on eBay from a US seller for $45 shipped.
Will be here in a few days. I'm stoked!
Click to expand...
Click to collapse
Expansys has it for $32.
Sent from my GT-N7000 using xda premium
xAnimal5 said:
Expansys has it for $32.
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
Free 2 day shipping?
In stock in 8 days. Plus the shipping time.
No thanks.
The original Samsung flip case is not very good quality. Mine just started falling a part after one month
Sent from my GT-N7000 using XDA App
masiegel said:
The original Samsung flip case is not very good quality. Mine just started falling a part after one month
Sent from my GT-N7000 using XDA App
Click to expand...
Click to collapse
Any suggested alternatives? I don't want to use a screen film. Just want to protect it from the inevitable drop.
Sorry but I haven't found the perfect protection for mine either.
Sent from my GT-N7000 using XDA App
So.. its finally in the otterbox defender series
Its costs 59.95 ..is it worth the money???
Sent from my SAMSUNG-SGH-I317 using xda premium
PolishPoower1 said:
So.. its finally in the otterbox defender series
Its costs 59.95 ..is it worth the money???
Sent from my SAMSUNG-SGH-I317 using xda premium
Click to expand...
Click to collapse
I would say no. I got the same case for my girlfriend for her S3 without reading the reviews.
It does protect the phone, but the rubber for the outside gets stretched out and doesn't fit the plastic part anymore. It happened within a month of putting it on. You can get it replaced under warranty, but I'd rather not do a warranty claim every month.
Check out the Ballistics case. I own it and love it.
I'd post the URL but I'm prevented from doing so until 10 posts. It's easy to Google though.
It all depends on what you need. If you need something that can withstand just about anything, yes, because neither trident nor ballistic will make their touch case for the n2. Otherwise, you could probably go with something else
Sent from my SGH-I317 using xda premium
AlcoholicDoc said:
I would say no. I got the same case for my girlfriend for her S3 without reading the reviews.
It does protect the phone, but the rubber for the outside gets stretched out and doesn't fit the plastic part anymore. It happened within a month of putting it on. You can get it replaced under warranty, but I'd rather not do a warranty claim every month.
Click to expand...
Click to collapse
Exactly the same thing happened on my S3's Otterbox...pissed me off. Buuut I ended up giving it to my gf and getting me a GN2...heh.
Sent from my SAMSUNG-SGH-I317 using xda premium
I love my commuter series, the rubber goes under the plastic so it eliminates stretching of the rubber and scratching of the phone.
Sent from my SAMSUNG-SGH-I317 using xda app-developers app
I used the Defender case on a few of my phones...tuff as nails is a good saying for them and offer a over abundance of protection if you really need that much for day to day usage...I never had a issue with them stretching out and needing a replacement...but I wasn't constantly pulling them off to do battery pulls either.I did wear out some of the rubber ports and had a replacement on that cause though..
On the defender..the screen protector didn't fair well enough for me though..and had the tendency to be a dust magnet underneath it on mine and using the S-pen..I don't know how well they will do...just something to keep in mind.
Last thoughts ...is the all the extra bulk added to a already large mobile device as our Note II's are...which is the main reason I choose to go back to the best case I ever used IMHO...which is the Seidio Surface case with belt clip.I ordered mine directly from the company..but..Best Buy will be selling the non-kickstand version under their Pt branding..and most should have them in stock for the holidays...
If you have never used one of these cases before...I would give some time for places to get them in-stock so you can go put one on and see for yourself if it will work for you or not...you may not like the size or how they fit on your Note...
Mac
Mac11700 said:
I used the Defender case on a few of my phones...tuff as nails is a good saying for them and offer a over abundance of protection if you really need that much for day to day usage...I never had a issue with them stretching out and needing a replacement...but I wasn't constantly pulling them off to do battery pulls either.I did wear out some of the rubber ports and had a replacement on that cause though..
On the defender..the screen protector didn't fair well enough for me though..and had the tendency to be a dust magnet underneath it on mine and using the S-pen..I don't know how well they will do...just something to keep in mind.
Last thoughts ...is the all the extra bulk added to a already large mobile device as our Note II's are...which is the main reason I choose to go back to the best case I ever used IMHO...which is the Seidio Surface case with belt clip.I ordered mine directly from the company..but..Best Buy will be selling the non-kickstand version under their Pt branding..and most should have them in stock for the holidays...
If you have never used one of these cases before...I would give some time for places to get them in-stock so you can go put one on and see for yourself if it will work for you or not...you may not like the size or how they fit on your Note...
Mac
Click to expand...
Click to collapse
Any recommendations? ?..right now I have the. Iconic guardian ..but I want maybe a little better protection
Sent from my SAMSUNG-SGH-I317 using xda premium
Amazon has a few cases that are less than 10$ handbook sturdy. I usually trust Amazon reviews. Better to test out a couple cases then to spend 60$! Otterbox is an extremely bulky case. I can only imagine one on an GN2!
Sent from my SAMSUNG-SGH-I317 using Tapatalk 2
PolishPoower1 said:
Any recommendations? ?..right now I have the. Iconic guardian ..but I want maybe a little better protection
Sent from my SAMSUNG-SGH-I317 using xda premium
Click to expand...
Click to collapse
Like I said...I feel the Seidio Surface case is the best one out there..In my job...I've dropped mine already (4 feet)..have banged it hard on ladders and other equipment..and it is still perfect..
My Pt case (Best Buy branded Seidio Surface case) I used on my Captivate has taken even rougher treatment over the 2 years I've had it and has not failed..so I'm pretty sold on the Seidio Surface line for all types of bumps & bruises a phone gets on my hip...They aren't water proof...and if you need something for water issues these won't work...but for everything except that and a full onslaught against the screen...they have performed above my expectations of a case and give good gripping while being fairly thin feeling..
Buy a good screen protector like the anti glare/smudge that AT&T stores sell (iFrogz)...and you will have a damn good protection package that looks great too..The Pt case when in stock at Best Buy is about $20 cheaper.
Mac
I have the Seidio Surface with the holster. I posted where I dropped it at least 40 feet at a high schoolgame with son and the case did its job
Sent from Note II... size Magnum!