Before I get ravaged, I have wandered from thread to thread to thread trying to find answers and unfortunately, everyone's got a different situation, so I'll try and sum it up here.
I have an Epic 4G that I threw the Samsung/Sprint Froyo ROM on as soon as it as available, after which I rooted it, installed CWM 2.5 and called it a day. I've been wanting to upgrade to Gingerbread, but the official EI22 ROM is obviously giving me issues because of root, so I decide, hey, I can try adding on some other ROMs and finally get into this thing.
Now somewhere amongst all this, I have CWM 5.0 installed and my phone is running both older and newer versions and only 5.0 is letting me restore in case I screw up.
So I grab the Gingerbread restore and after wiping my data, restore it. Gets stuck on Samsung logo. Try this a few times, give up, reload my original Froyo image (only after coaxing CWM to load up 5.0 instead of 2.5). Try again tonight with ACS ICS ROM and 2.5, still stuck at Samsung logo. Wipe and try again, same thing.
So my question is: A) would it be better to go back to Odin and try again despite a stable Froyo image, B) how can I eliminate one of these CWMs, C) has anyone else had these issues?
seems like you did a whole bunch of things... probably best to start clean.. odin to stock froyo. then you probably want to root it from there. after that, you can flash the latest cwm, then latest gingerbread rom
when you installed cwm5, did u flash through rom manager or through recovery?
I honestly just downloaded CWM from Marketplace and I found out how I was able to access it: it's a zip in my Clockwork folder. Once I "install" that, it loads into 5.0 and that's how I've been able to work, but it never updates CWM, I have to keep having to boot into it from the zip.
well u have cwm2,5 u said... try booting into cw, (three fingers) and flash the zip. but maybe you can try downloading cwm from the official cwm thread and flash that zip just to be sure
http://forum.xda-developers.com/showthread.php?t=1357655
Yeah, every time I try to flash that ZIP, it just opens up 5.0 instead. I'll have to try doing it from scratch.
isnt that what u want??? 5.x.x.x??
EpicNewb4g said:
isnt that what u want??? 5.x.x.x??
Click to expand...
Click to collapse
Yeah, definitely.
Okay, Odin'ed back to stock Froyo and rooted, loaded on ACS Recovery. This whole process has killed my battery, so I'm going to recharge before trying to load up a new ROM. It seems like it should be easy from here on out...
You should just start over with a fresh install.
Here are the steps. I made this list before CWM 5 was released, but you can get the CWM 5 ODIN .tar file from that thread which was linked a few posts up.
http://forum.xda-developers.com/showpost.php?p=19444784&postcount=93
Yeah I ODINed back with ACS Recovery and now I'm running ACS ICS, which is sooooooo awesome. I think I was afraid about having to ODIN back to stock and losing everything. Now I should still have the Froyo image on there, can't I just run between this new one and that?
Thanks, all!
What do you mean by you have acs ics and still have the froyo image?? are you dual booting
Acs ics = rom.
EpicNewb4g said:
What do you mean by you have acs ics and still have the froyo image?? are you dual booting
Click to expand...
Click to collapse
Does he mean the wallpaper?
Related
Hey guys, check it out. I just figured out how to get into clockwork recovery, and assuming and going about flashing a rom just like I would on my evo, I go ahead and download a rom for the epic, flash it, and it works fine. So it loads up like normal after a flash n reboot, and it kept saying no service... so I was like... uh... weird.. so I booted back into clockwork and tried nand back to the backup I did before flashing anything, of course... but I started getting an error saying it couldn't open recovery.log and now it freezes restoring at saying "lost+found" .... so I pull the batter, and now it just automatically revolts to clockwork all the time, and trying to boot the system normally... I'm not using CWM 3+.. rather the older 2.xx ... any ideas?
It's hard to understand your writing. I think the best thing you can do is use Odin to flash back to stock and start over. You didn't say what version of android you were on but if it's dk28 did you flash the modem?
What rom did you flash? I take it you were on stock di18 before?
Flashing a rom based on one of the leaked froyo builds without also flashing a modem could cause the initial problem.
And nandroid doesn't backup or restore the kernel, so using that to restore still leaves you with the kernel of the rom you flashed before, which can cause problems across build versions.
You're best bet is to odin back to di18 and start again.
musclehead84 said:
It's hard to understand your writing. I think the best thing you can do is use Odin to flash back to stock and start over. You didn't say what version of android you were on but if it's dk28 did you flash the modem?
Click to expand...
Click to collapse
Thanks a bunch, I know I re-read my post and was like.. man I wasnt descriptive at all... LOL, but I checked out this Odin, and TBH i have NO idea what all this stuff is for the Epic, only doing it to fix the booboo I did on my g/f's phone I have the Evo so its totally different stuff almost... Anyways im back to stock, now I need to read up before screwing around again .
Hello All,
I have been working with my friends EPIG 4g phone for a while now. The first thing I did was use "superoneclick 1.7" to root his phone. Then he got interested in trying different roms+kernels, so he came to me for more help. Almost all the custom roms I was researching are EC05 based roms, so I looked further into it. For reasons unknown, he is still on DI18 Eclair (must not have got the OTA). I dug on forums and found the zip file that would allow him to jump from DI18 to EC05 (froyo), but I need a custom recovery to install the zip. No matter what I try, I cannot get the phone to boot into CWM recovery. (Tried both from rom manager, and using camera button+vol. down+power combination) I have tried just about everything that I can think of, to no avail.
I have also tried:
Unroot & Re-root using process found here:
http://forum.xda-developers.com/showthread.php?t=770388
Wiping all data via factory reset (really wish I wouldn't have, waste of a try)
Tried using methods found here:
http://forum.androidcentral.com/epic-4g-rooting-roms-hacks/34603-clockworkmod-recovery-rom-manager-guide.html
When trying to do anything in the stock recovery, I always get the:
e:signature verification failed errors.
Please bombard me with any and all ideas you guys have. I am currently about to try to manually install the CWM recovery by placing the update.zip file on the SD root directory. IF I can get that part done, I'm confident I will be able to get everything going. Another option I have read from other people's threads that I have not yet used is the Odin revert to stock and then flash some special .tar files. I took a look at Odin and don't remember seeing options for "stock" or anything, so if anyone can point me to a good Odin walk-through, that would be awesome.
PS: Ask me if I have failed to clarify on any aspects of the problem. Forgive me for not including more info on the problem, Ive been through like 8 hours of random stuff while trying to fix this, so Ive seen too much to remember everything I've seen.
Thanks in advance!
-Clarity
Too many words
I kinda fell a sleep in the middle so yeah
If you want to return too stock use odin
If you want to go to froyo from eclair use odin
If you want cw use I've of the one click rooters
Going to cw is just pressing every button that is not on the keyboard
(power + volume up + volume down + camera)
Sent from my SPH-D700 using XDA Premium App
Stock recovery will get you nowhere on this phone, and with all you have tried so far, I believe Odin is the best course of action. Here is a link to the Odin package-
http://www.mediafire.com/file/fn9s5cqkkwyu68d/Odin3+v1.61andepic.pit.zip
Unzip it to a folder on your desktop.
The necessary drivers and instructions for using it are here in the wiki
http://forum.xda-developers.com/wiki/index.php?title=Samsung_Galaxy_S/SPH-D700#Odin_Stock_Flashing
Follow the instructions carefully and be sure the drivers are installed before starting. Obviously, wherever it mentions the DI18 tar, you will use the current one in it's place. You can use this one, it's pre-rooted and de-odexed.-
http://forum.xda-developers.com/showthread.php?t=1021305
That tar file is still RFS file system so you will need to install CWM 3.0.0.6 and boot into it with the 3 finger solute so it can convert the file system to ext4. Package and instructions here-
http://forum.xda-developers.com/showthread.php?t=897612
If you made it this far you should be able to install one of the current ROMs you've been shopping for.
Thanks for the responses guys, I will try that out when I get a chance. Might be a while though because I don't see my friend that often.
So I was able to use Odin and successfully flash the EC05 .tar. However, I was unable to flash the Syndicate Frozen ROM that my friend wanted. It seems to fail on the flashing kernel step, some blue text that is large and out of place shows up for a second, and it goes back into the recovery menu. When I try to reboot the phone, it is clear that it did not work (assuming the kernel install is failing). I am going to Re-flash the EC05 for now, but do you guys have any recommendations for ROM+Kernel combinations good for battery/performance? Link me up if you know of any good combo's, but I've researched it a bit myself as well.
Basically, I would like to know what I am doing wrong here. Is the CWM included from that .tar file compatible & ready to flash any custom ROM that I want? Or do I need to use that CWM 3.0.0.6+root that Mattalica suggested? The EC05 was prerooted, so I'm wondering what happens if I use the 3.0.0.6 exploit on top of this root... Let me know guys.
onlyclarity said:
So I was able to use Odin and successfully flash the EC05 .tar. However, I was unable to flash the Syndicate Frozen ROM that my friend wanted. It seems to fail on the flashing kernel step, some blue text that is large and out of place shows up for a second, and it goes back into the recovery menu. When I try to reboot the phone, it is clear that it did not work (assuming the kernel install is failing). I am going to Re-flash the EC05 for now, but do you guys have any recommendations for ROM+Kernel combinations good for battery/performance? Link me up if you know of any good combo's, but I've researched it a bit myself as well.
Click to expand...
Click to collapse
What happend when you rebooted that indicated it was not successful? If you had strange vibrations and a bootloop, that is common when trying to flash these new generation ROMs like ACS and Bonsai. A simple reflash usually fixes it.
Sent from my SPH-D700 using Tapatalk
The Syndicate one failed as the kernel step was happening, resulting in a complete ROM failure (syndicate frozen tries to install their kernel midway thru the ROM flash). I tried it more than once, with no success. It just kept failing at kernel and only letting me into the CWM recovery (probably had already erased the base ROM?)
I was able to flash Baked Snack 1.6 without trouble and he is going to try that out for now. Interestingly enough, I did try to flash the baked snack "step 2" kernel, which is supposed to be a bit better on the battery life, and guess what happened mid install: the same weird black screen with huge blue text that goes off the screen (I think it says it fails, not sure though).
Here's the kicker on that, the "about phone" section does say that the base-band is something like "baked snack 1.6 step 2", which is odd, but the kernel version section seems to boast the same kernel version number that it had before. This leads me to think that it may have worked, but again, I cannot be 100% sure. If you have any more comments/suggestions, feel free to keep posting. Thanks again for all your help with the Odin TAR stuff, I really didn't feel confident until you confirmed the method.
onlyclarity said:
The Syndicate one failed as the kernel step was happening, resulting in a complete ROM failure (syndicate frozen tries to install their kernel midway thru the ROM flash). I tried it more than once, with no success. It just kept failing at kernel and only letting me into the CWM recovery (probably had already erased the base ROM?)
I was able to flash Baked Snack 1.6 without trouble and he is going to try that out for now. Interestingly enough, I did try to flash the baked snack "step 2" kernel, which is supposed to be a bit better on the battery life, and guess what happened mid install: the same weird black screen with huge blue text that goes off the screen (I think it says it fails, not sure though).
Here's the kicker on that, the "about phone" section does say that the base-band is something like "baked snack 1.6 step 2", which is odd, but the kernel version section seems to boast the same kernel version number that it had before. This leads me to think that it may have worked, but again, I cannot be 100% sure. If you have any more comments/suggestions, feel free to keep posting. Thanks again for all your help with the Odin TAR stuff, I really didn't feel confident until you confirmed the method.
Click to expand...
Click to collapse
BakedSnack 1.6 is a RFS ROM and is DI18 based. If you installed CWM 3.0.0.6, it would have converted your filesystem to EXT4. BakedSnack 1.6 does not have kernel support for EXT4. However if you installed an older version of CWM it would explain how ACS failed to install and how BackedSnack 1.6 was able to install and boot.
When I tried to switch from ACS EI22 4 to 5 my phone force close looped because of some issue with launcher pro. I went to reflash the rom from CWM and ever since my phone won't properly load roms from CWM. When the phone has a custom rom it boots right to CWM when I power them up only to freeze again when I try to boot the rom from recovery.
I have Odined to stock EC05, and one click flashed CWM. I have flashed pre-rooted EC05 roms. I Odined to EI22 & EC05 modem Tar and went on to install ACS recovery over CWM.
I have Odined multiple times on multiple stock roms and custom roms. The problem persists. Once I'm in recovery (I've tried 3 versions) and I click "reboot" the phone locks with a black screen with the home buttons on or an image of the clockwork logo (depending on which version I'm trying).
The strange thing is, all of the stock roms work just fine and I was able to install EI22 from OTA with no problems. But who wants that icky CIQ? or Sprint nascar/football/bloatware? Yuck!
I've had some limited success with simple pre-rooted deodex etc roms I flash from Odin, but sometimes recovery loads when I power up the phone. And sprint keeps wanting to force the update on me.
Does anyone have any suggestions? I've tried everything I can think of and have searched, to no avail, for a solution.
Does anyone think this is a hardware issue? One of the kernels I tried on ACS 5 was a beta.
If so, how should I go about getting it fixed since it is under warranty. I do have accidental damage coverage.
Most likely not hardware related. I say that because you said you can run stock just fine.
I would try the new CWM5 just released and see if the problem is still there.
Disregard post
Sent from my SPH-D700 using xda premium
Neckberg said:
Most likely not hardware related. I say that because you said you can run stock just fine.
I would try the new CWM5 just released and see if the problem is still there.
Click to expand...
Click to collapse
That's what I thought and why I continued to Odin and one-click root different types of CWM and ACS recovery.
I'm going to see if the repair store nearby can run a diagnostic. Otherwise I'm going to stay away from any modifications that require me to use CWM for anything since I was able to Odin a custom rom (but it was EC05).
Hopefully Samsung will release the EI22 modem tar and someone will release a pre-rooted version that I can Odin.
I tried odin flashing different recoveries yesterday. Odin gave them a pass but they wouldn't boot from the 3 finger salute (like they didn't install).
I've never tried to install CWM this way so I'm not sure if you need to be rooted before hand or you need a specific kernel.
osiris2600 said:
I tried odin flashing different recoveries yesterday. Odin gave them a pass but they wouldn't boot from the 3 finger salute (like they didn't install).
I've never tried to install CWM this way so I'm not sure if you need to be rooted before hand or you need a specific kernel.
Click to expand...
Click to collapse
So it goes back into stock recovery with 3 finger? Easiest fix is Odin in a prerooted EC05 ROM tar like EC05plus then flash a Gingerbread ROM then flash the modem delta.
Sent from my SPH-D700 using XDA App
kennyglass123 said:
So it goes back into stock recovery with 3 finger? Easiest fix is Odin in a prerooted EC05 ROM tar like EC05plus then flash a Gingerbread ROM then flash the modem delta.
Sent from my SPH-D700 using XDA App
Click to expand...
Click to collapse
Yes it goes into stock recovery. Unfortunately flashing in CWM has been the problem that lead me to flashing CWM through Odin. For more detail see the original post. Whenever I try to flash something through CWM the recovery has problems and it fails to load the rom that is installed.
I'm trying as many alternatives to pinpoint the problem. I'm going to try switching SD cards and see if the problem resulted from some kind of data corruption there. Should have an update on that sometime tonight.
If I can't figure out and fix the problem I'll be at the mercy of sprint or if I want root I'll have to wait for a pre-rooted EI22 rom complete with modem tarball so I can odin that.
I saw the OP but didn't see where you Odin'd a prerooted EC05 ROM like EC05plus. Then flash a GB ROM right after. Just 2 steps. Then if you want the modem one more step to flash the delta. It's worth a shot?
Sent from my SPH-D700 using XDA App
kennyglass123 said:
I saw the OP but didn't see where you Odin'd a prerooted EC05 ROM like EC05plus. Then flash a GB ROM right after. Just 2 steps. Then if you want the modem one more step to flash the delta. It's worth a shot?
Sent from my SPH-D700 using XDA App
Click to expand...
Click to collapse
I can't flash from CWM no matter how CWM gets on my phone. I tried exactly what you said. My original post says I Odined multiple stock and custom roms. I didn't get around to CWM flashing on a different card tonight, finals got me busy busy.
Enjoy your turkey day!
osiris2600 said:
I can't flash from CWM no matter how CWM gets on my phone. I tried exactly what you said. My original post says I Odined multiple stock and custom roms. I didn't get around to CWM flashing on a different card tonight, finals got me busy busy.
Enjoy your turkey day!
Click to expand...
Click to collapse
Thanks, you too.
So if Odining the EC05Plus ROM didn't get you a working 3 finger salute CWM, then maybe you should try ROM Manager and downloading CWM 5.X.
http://forum.xda-developers.com/showthread.php?t=1357655
It must be a hardware problem. I can odin a rom with CWM and it will boot fine. However if I ever try to open CWM the rom will never load again as the phone boots to recovery and get's stuck there.
I confirmed this by Odin flashing and then going into clockwork and not even flashing anything and it got stuck. Flashing in CWM will actually install things as I can change CWM within CWM but I still get stuck when trying to load the rom.
So the only way for me to enjoy a rooted phone is to refrain from CWM recovery.
I went back to a EH17 odined pre-rooted rom. When EI22 gets a modem tar hopefully someone will make a pre-rooted, deodexed, zipaligned odin tar (and if I'm lucky, CiQ will be removed).
Otherwise I'd like to get a replacement but explaining the problem to sprint is kind of a catch 22 since the issue only appears when I load a custom recovery.
How about flashing CWM 5.027 and downloading ROM Manager and installing 5.027 through that as well. Rom Manager actually downloads the CWM 5 and keeps it packed on your sd card and installs it everytime you use it. It allows ROM Manager to be able to update the CWM whenever a new version comes out.
I'm sorry, Im confused. I have been searching and I have read 3 seemingly contradictory facts:
- NEVER flash CM9 with any other recovery other than clockwork mod
- NEVER use odin to flash clockwork mod on an ICS rom
- You can flash a newer version of CM9 over the old one
So i'm using CM9 RC0 and I would like to update to alpha2 without wiping. CWM disappeared when i flashed and I keep reading that its dangerous to use the stock rouge recovery. So I went to go use odin to get CWM back on but there is a warning to never try to load it using an ICS rom?
Where am I going wrong here? I really dont want to wipe and flash to a GB rom just so that I can use odin to get CWM and flash back to cm9.
Thanks, I just wanted to make sure i didn't ruin my phone!
drumstyk1 said:
I'm sorry, Im confused. I have been searching and I have read 3 seemingly contradictory facts:
- NEVER flash CM9 with any other recovery other than clockwork mod
- NEVER use odin to flash clockwork mod on an ICS rom
- You can flash a newer version of CM9 over the old one
So i'm using CM9 RC0 and I would like to update to alpha2 without wiping. CWM disappeared when i flashed and I keep reading that its dangerous to use the stock rouge recovery. So I went to go use odin to get CWM back on but there is a warning to never try to load it using an ICS rom?
Where am I going wrong here? I really dont want to wipe and flash to a GB rom just so that I can use odin to get CWM and flash back to cm9.
Thanks, I just wanted to make sure i didn't ruin my phone!
Click to expand...
Click to collapse
What you want to do is flash the EL26 kernel with CWM through Odin. Once it's flashed and the phone starts to reboot, pull the battery. Put the battery back in, boot into recovery via Vol up+ power and then flash Alpha 2 over RC0, flash GApps and reboot. You should be good to go then.
Sent while hanging with that really hoopy frood Ford Prefect.
If you haven't already, I believe the OP has updated the steps fairly well here:
How Not to Brick Your E4GT
Flashing roms on Epic4gtouch is so complicated. I remember when I had my HTC hero. All you gotta do is download the rom, put it in your sdcard, open rom manager then flash xD
snapback2 said:
Flashing roms on Epic4gtouch is so complicated. I remember when I had my HTC hero. All you gotta do is download the rom, put it in your sdcard, open rom manager then flash xD
Click to expand...
Click to collapse
This is a recent thing that started when the ICS leaks started coming. Before ICS, rooting and flashing this phone was as easy as any. It still is actually, but you have to be more careful, especially with any of the AOSP ROMs. It should be back to normal once the official ICS update is released and we get our hands on the source code.
Sent from my SPH-D710 using Tapatalk
blackroseMD1 said:
What you want to do is flash the EL26 kernel with CWM through Odin. Once it's flashed and the phone starts to reboot, pull the battery. Put the battery back in, boot into recovery via Vol up+ power and then flash Alpha 2 over RC0, flash GApps and reboot. You should be good to go then.
Click to expand...
Click to collapse
Worked perfectly! Hopefully you have helped many noobs down the road when they search for this. What threw me off was QBKings video when he kept warning to never flash EL26 on ICS. (Mad respect though, QBKing!). Thanks for clearing that up for me!
On a side note, yeah, things seem complicated. I know there is a good reason why CM9 doesn't include a good recovery but I hope as things develop we will eventually get back to the "Rom Manager" days. Man, our devs spoil us!
I just upgraded my E4GT Sprint from GB to ICS using the oneclick installer. I am trying to install the CODENAME rom from CWM but havng issues getting CWM installed. I used the the E4GT auto but FE16 isnt listed so i tried FE15 but it wont load into CWM. So i tried this link "http://forum.xda-developers.com/showthread.php?t=1390393" and flashed from ODIN and it goes into CWM but before it boots it says my phone is a gt-i9100 and has a ! on the bottom. It appears to boot though so i booted back into CWM and tried to flash the ZIP for CODENAME and the gapps file and it jsut gets stuck at the boot screen with the transformer logo. I cant get into CWM after that point and have to ODIN back to ICS. I am on ICS now and its working fine. Does anyone have any instructions on getting CWM installed and the codename rom from a fresh odin ICS install?
mazdaspeed6 said:
I just upgraded my E4GT Sprint from GB to ICS using the oneclick installer. I am trying to install the CODENAME rom from CWM but havng issues getting CWM installed. I used the the E4GT auto but FE16 isnt listed so i tried FE15 but it wont load into CWM. So i tried this link "http://forum.xda-developers.com/showthread.php?t=1390393" and flashed from ODIN and it goes into CWM but before it boots it says my phone is a gt-i9100 and has a ! on the bottom. It appears to boot though so i booted back into CWM and tried to flash the ZIP for CODENAME and the gapps file and it jsut gets stuck at the boot screen with the transformer logo. I cant get into CWM after that point and have to ODIN back to ICS. I am on ICS now and its working fine. Does anyone have any instructions on getting CWM installed and the codename rom from a fresh odin ICS install?
Click to expand...
Click to collapse
You really should read more before hopping around like that without checking. Real risk for a brick here.
-Flash EL26 stock CWM kernel via the PDA option in ODIN/Mobile ODIN
-When phone begins reboot, Hold Power + Volume up until boots into recovery.
-Wipe data/factory, cache and dalvik cache
-Flash ROM
-Flash Gapps
-Reboot
Those are the instructions right from the developer's thread. This is an AOSP rom and it sounds like you're trying to install TW kernels.
http://forum.xda-developers.com/showthread.php?t=1662295
This is the kernel repository. It links to each kernel where you can read further and find out if they are safe for flashing things.
Seems like you've done a bunch of stuff. But you really should do a whole bunch of reading first or you will brick your phone.
My suggestion would be to use sfhub's one-click http://forum.xda-developers.com/showthread.php?t=1705730 to get to a fully stock rooted device. Then use his autoroot package http://forum.xda-developers.com/showthread.php?t=1342728 to add CWM (the lates in the package is FF11+CWM Agat I believe) then you can add Agat's latest kernel with CWM http://forum.xda-developers.com/showthread.php?t=1721065
But I would be very careful when flashing ANY ROM; use the developers prefered method. Some recommend using EL26 CWM. Some a different recovery or procedure. Be especially careful with CM9 and AOKP builds to follow the directions there.
Good luck
So while i was waiting for a response i just went back to the stock GB using the one click install. I then used the autoroot package to install CWM and then restored my nandroid backup before i made in the very beginning. So my phone is back to a perfect state with GB and CWM installed. Can i just flash the ROM from CWM as is then? For some reason i thought it had to be "converted" to ICS and thats what started this whole mess. Things have changed since my old Evo
I just noticed that im running EL29 not 26...does that matter? When i try to flash that CMW EL26 stock root is when it gave me that gt-i9100 on boot and the ! at the bottom. Using the autoroot and choosing the EL29 Rogue is the only way i got it installed.
mazdaspeed6 said:
So while i was waiting for a response i just went back to the stock GB using the one click install. I then used the autoroot package to install CWM and then restored my nandroid backup before i made in the very beginning. So my phone is back to a perfect state with GB and CWM installed. Can i just flash the ROM from CWM as is then? For some reason i thought it had to be "converted" to ICS and thats what started this whole mess. Things have changed since my old Evo
I just noticed that im running EL29 not 26...does that matter? When i try to flash that CMW EL26 stock root is when it gave me that gt-i9100 on boot and the ! at the bottom. Using the autoroot and choosing the EL29 Rogue is the only way i got it installed.
Click to expand...
Click to collapse
My friend some good suggestions above your post. Give yourself a day or two and do some reading prior to flashing. This way you may not end up at Sprint making up stories about why your phone wont boot up.
Let me just echo what everybody else has said, you're gotta read more. A lot more! If you're one goal is to get CNA in your phone I would recommend reading all of the very first post on that thread. They give step by step instructions.
If you need CWM there are several options to get it on your phone. Both sfhub and I have put together several one-click and automated options to get it on your phone.
One thing that hasn't been suggested yet but I would strongly encourage you to do is to read the "How Not To Brick Your E4GT" thread. It's sticked in the General section.
Good luck!
Two more things.
1) If you're going to ask for help give it a few minutes before trying something new. It takes people a minute to reply. Sometimes waiting that extra minute or two is all you need to be saved from bricking.
2) Don't be afraid to hit your thanks button for everyone who has offered advice already. I got them once for you but it might not hurt to do it again.