Im unable to get my device recognized though adb. Nothings apearing on my computer (windows 7 x64) the usb driver that came with the latest sdk say its not windows 64 compatiable...
Im getting This device cannot start. (Code 10) in device status box
Where can i get latest driver from?
Ive deleted all adb htc and usb drivers asossiated with an adroid device from my laptop but still i get device cannot start code 10 error...
how is everyone else getting this to work?
Related
Im unable to get my device recognized though adb. Nothings apearing on my computer (windows 7 x64) the usb driver that came with the latest sdk say its not windows 64 compatiable...
Im getting This device cannot start. (Code 10) in device status box
Where can i get latest driver from?
Did you try Samsung? I mean, they are the manufacturer of the phone and everything...
Also, this is in the wrong section. It belongs in General.
Pretty sure ADB handy when developing for android....
Do you have links to Samsung ADB driver for galaxy nexus? if not your post just spam so piss off.
Ive deleted all adb htc and usb drivers asossiated with an adroid device from my laptop but still i get device cannot start code 10 error...
how is everyone else getting this to work?
If its a laptop then try unplugging the power. That happened to me also.
Sent from my Galaxy Nexus using XDA App
Hi all,
I just bought a Galaxy Nexus and I'm having problems with the ADB port: my Lenovo w520 laptop running win7x64 simply does not detect the ADB device in device manager. I tried connecting the phone to my wife's laptop (HP running win7x64) and the ADB device is detected so it is not a problem of the phone or the cable. On my pc I only get the Galaxy Nexus MTP device and that is all.
It is not a matter of driver, there is simply no device detected hence it is not possible to send ADB command.
I do not know if it is related, but samsung USB mobile driver fails during installation without giving a valid reason.
anyone having similar problem ?
thanks
cheerts
So... how do you know its not a driver issue? Sounds like one to me. Have you tried manually installing other drivers?
Well, what is actually strange is that:
1) if I connect the phone to my wife laptop with USB debugging ON and no driver installed (it's HER pc, I cannot install my stuff), a composite device with two devices (MTP and ADB) is detected.
2) in fastboot mode, my laptop detects the ADB port and install proper drivers; using Galaxy Nexus toolkit, I can successfully list my device.
When the phone is fully booted, my laptop simply see only the MTP device. If it were just a matter of driver i would simply get an Unknown device in win7 device manager...
thanks
cheers
enryfox said:
Well, what is actually strange is that:
1) if I connect the phone to my wife laptop with USB debugging ON and no driver installed (it's HER pc, I cannot install my stuff), a composite device with two devices (MTP and ADB) is detected.
2) in fastboot mode, my laptop detects the ADB port and install proper drivers; using Galaxy Nexus toolkit, I can successfully list my device.
When the phone is fully booted, my laptop simply see only the MTP device. If it were just a matter of driver i would simply get an Unknown device in win7 device manager...
thanks
cheers
Click to expand...
Click to collapse
Eh. Fastboot is all you need. :thumbup:
Sent from my Galaxy Nexus using XDA
After several attempts (including installing win7 x64 in a virtual machine ...) I finally solved my problem: it was indeed a driver issue, my win7 did not automatically searched for proper driver (and the Samsung driver is available on-line in windows update). I forced a driver update for the MTP device so that windows downloaded Samsung driver and now both the phone and ADB port are detected and working. It is still a mystery why the driver provided by various tool-kit failed to install, but nonetheless the GNex is now fully set-up.
Actually the solution is so dumb that I feel a bit ashamed of myself...
thank
bye
I have an HTC Incredible 4G LTE. I underwent the process detailed here to unlock the bootloader.
When i got the HTCDev website, i ran a fastboot command and it just says <waiting for device>. I tried to detect the device with adb devices, and fastboot devices, but with no success. the THC Sync manager is not installed. HTC drivers should be installed. I am plugged into a USB 2.0 port, the same one used through out the process (i even tried the other one).
I am at a loss as to what is happening. I do know that the device manager sees my phone, and shows the drivers as the latest version. It does give this message:
This device cannot start. (Code 10)
A request for the USB BOS descriptor failed.
Click to expand...
Click to collapse
The device manager is listing the driver as version 2.0.7.3.
EDIT: Was able to get driver updated to 2.0.7.18
Also, when connected to the computer normally an orange light shows near the speaker. I wasn't concerned at first as I know the Android OS is not actually up and running on the phone, but do wonder if it doesn't indicated a problem.
Another note, I am running Windows 8.
EDIT 2: More research has yielded the following "Android Bootloader Interface". Every reference installing this from the usb_driver in the ../extra/google/usb_driver folder. When I attempt to do so from the device manager Have Disk ui I receive the following error
The folder you specified doesn't contain a compatible software driver for your
device. If the folder contains a driver, make sure it is designer to work with
Windows for x64-based systems.
Click to expand...
Click to collapse
EDIT 3: Removed entire android sdk, redownloaded and installed. Removed all HTC software and drivers. Booted phone into fastboot, and windows detected an "Android 1.0" device, installed the Android Bootloader Interface driver from the google usb_driver successfully. However, fastboot devices still does not detect the phone, and device manager still shows code 10.
As of now:
No HTC Sync, or HTC Driver
phone booted into fastboot, phone displays "FASTBOOT USB"
phone is set to usb debug
phone is connected to pc with good cable to a usb 2.0 port
I have:
rebooted pc, re-installed drivers, changed usb cords, changed usb ports, even tried a usb 3.0 port, i have tried some generic fixes for code 10 errors, and completely run out of ideas
EDIT 4: After using a different computer running Windows 7 I was able to complete the process, however, i would very much like toresolve the issue with my own PC, as the Win7 laptop is not mine. I utilized the adb/fastboot/winapi files from my Win8 machine. Win7 automatically found HTC drivers (2.0.7.18) and everything seemed to work just fine. Any ideas?
Hi All
I have a retarded problem with the ADB drivers for my Xperia S.
When i enable USB Debugging and i connect it Windows 7 64bit laptop i am unable to get the adb driver for my phone to work. The computer doesnt detect and install the ADB drivers for my Xperia S.
After manually installing the driver the computer keeps saying that "The Device Cannot Start (Code 10)". The drivers that i installed were from the Sony website.
But the strange problem is on another Windows 7 32bit Laptop and a Windows XP Desktop, Device Manager automatically detects and installs the ADB driver for my phone. Ive tried disabling driver signature enforcement and reinstalling the drivers but it still has the " This device cannot start problem"
Any ideas?
itsbighead said:
Hi All
I have a retarded problem with the ADB drivers for my Xperia S.
When i enable USB Debugging and i connect it Windows 7 64bit laptop i am unable to get the adb driver for my phone to work. The computer doesnt detect and install the ADB drivers for my Xperia S.
After manually installing the driver the computer keeps saying that "The Device Cannot Start (Code 10)". The drivers that i installed were from the Sony website.
But the strange problem is on another Windows 7 32bit Laptop and a Windows XP Desktop, Device Manager automatically detects and installs the ADB driver for my phone. Ive tried disabling driver signature enforcement and reinstalling the drivers but it still has the " This device cannot start problem"
Any ideas?
Click to expand...
Click to collapse
Try installing the drivers with Flashtool
Tried it. Still has the same problem
Sent from my iPad using Tapatalk
Hi
ADK is working fine with my other devices, but my PC can't seem to install the drivers for Huawei Watch. The devices is in the device manager, but a little yellow triangle at the side, which means the device drivers are not installed.
I have tried Google, but the guides just say install the devices drivers but clicking update in Device manager with the xx file I downloaded, but windows can't see the file.
Thanks in advance
only pdanet drivers works for me for adb but in twrp i cannot connect to pc . how have you solved the issue i have same problem in device manager. tried more than 6 ways after googling pc
i've tried pdanet drivers 64bit on my win7 64bit version.
but the installation cannot continue.. did u success installing pdanet ? what version of your windows u have ?
why is this marked as solved because i dont see the solution. i just received my watch today and cant seem to get device manager to recognize any drivers.
PDAnet doesnt fully install because i cant install drivers
Minimal ADB and fastboot dont recognize any devices attached
Universal Naked driver 0.73 doesnt work even after modifying the android_winusb file
I even installed the Google USB driver from the SDK Manager, but i dont see anything on my machine.
ive had this watch for 2 hours and already frustrated as hell lol. can someone provide assistance?
thanks!
PS. im running this on Windows 7 64 bit and the watch is at LCB43B already
same problem with me.. attaching usb cable into charger dock, detect huawei watch in device manager but drivers cannot be installed..
what's the problem ? which drivers can be used ?
hendry said:
same problem with me.. attaching usb cable into charger dock, detect huawei watch in device manager but drivers cannot be installed..
what's the problem ? which drivers can be used ?
Click to expand...
Click to collapse
i was trying all day on my work computer which runs windows 7 x64 with no luck, but the watch was detected immediately on my windows 10 machine at home. strange.
Success!
I fixed my issue! I had the same issue everyone here mostly had. I could unlock the bootloader, but I couldn't get the Fastboot recovery to work because the drivers were not detected by Windows 10, or my other Windows 7 machine. Both machines installed a standard version of Google Android device drivers and boot loader drivers, but they were not detected by ADB commands once in the bootloader.
First I went here to download all the drivers, but got stuck:
http://www.thecountrycaller.com/37260-how-to-unlock-huawei-watch-bootloader-and-flash-twrp-recovery/
So what I did was ran the commands to reboot to bootloader, then flash commands for the recovery, left my device plugged in. Then I went into the Windows Device manager, and looked for the Android or Adb drivers loaded. I double clicked the driver, and clicked on uninstall driver, and told windows to delete the drivers. I then unplugged my device (still in bootloader mode), plugged it back and in windows instantly detected the ADB flash commands and boom, TWRP recovery completed.
Hope this helps some of you.
this did not solve my issue ive installed the drivers and nothing over and over can someone help me with the drivers please
thanks
running windows 7
tried to install every driver possible
Weird as it may be, I managed to get Hwatch to connect to ADB via USB by installing the watch as a Motorola Android Sooner Composite ADB Interface - in device manager-update driver-select from PC-select from device list-android usb device-motorola
Is there anything what i can do when my classic watch is NOT recognized on both pc and notebook? I hear no sound, i can´t see anything in device manager...any help?
Hi I`m using the huawei 2 LTE version - can I take the same driven from here or will that cause problems ?
---------- Post added at 08:11 AM ---------- Previous post was at 08:09 AM ----------
Is this may be a real help https://www.reddit.com/r/hwatch/comments/3n9ckp/how_to_get_adb_access_over_usb/