Overclock HTC desire z custom rom - G2 and Desire Z Q&A, Help & Troubleshooting

Hi,
I'm just wondering what is the easiest way to permanently overclock my desire z. At the moment, I've installed custom rom BeatMod Blisssense (Kernel: 2.6.35) Android 2.3.5 sense 3.5 ive done a little research, and found something called OC /uv or something ;S
i would really want to overclock, since running custom rom is kinda laggy ;L could somebody help to point me in the right direction?
Thanks! XD

There are many overclock apps in the market... Oc/uv beater is one possibility and fits well with roms that have a build in oc daemon. The classical app for overclocking is setcpu... But if its your first time overclocking be sure to overclock temporarly and not permanent, because at some point your phone is going to freeze and if you did a permanent oc you have to flash the whole rom again...
Sent from my HTC Vision using XDA App

Related

Stock Sense Rom.....what Kernel to use?

I am running a stock 2.1 HTC Desire CDMA sense rom. Anyone have any suggestions about what kernel is the best to run? The stock kernel doesn't allow any adjustment to the CPU speed.
eric_bean said:
I am running a stock 2.1 HTC Desire CDMA sense rom. Anyone have any suggestions about what kernel is the best to run? The stock kernel doesn't allow any adjustment to the CPU speed.
Click to expand...
Click to collapse
Did you try to disable perflock via setCPU ?
y not root and install a custom rom, can't really imagine ppl still using 2.1

[Q]Android Revolution HD 5.1.0 CPU Overclocking

Heya,
I just installed this new rom (Android Revolution HD 5.1.0) and on that post it says that if u install setcpu u can clock it to 1200 mghz or something. I tried it and I also tried to perflock it but it said it didnt work and I had to mail the developer.
Anyone has an idea how Im able to overclock it? its the gingerbread version btw.
Thx in advance!
New kernel has yet to come for this base, so have patience, it will come soon i think
Sent from my Desire HD using XDA App
^ Use the 3.7 ROM if you really want to overclock.
It's also more stable and optimized.
Also the radio for 5.x.x is horrible :S I can hardly get any WIFI signal now.
nerotix said:
Heya,
I just installed this new rom (Android Revolution HD 5.1.0) and on that post it says that if u install setcpu u can clock it to 1200 mghz or something. I tried it and I also tried to perflock it but it said it didnt work and I had to mail the developer.
Anyone has an idea how Im able to overclock it? its the gingerbread version btw.
Thx in advance!
Click to expand...
Click to collapse
MDJ has made an OC kernel you can flash through CWM.
http://forum.xda-developers.com/showthread.php?t=1050106
apoorvajsh said:
MDJ has made an OC kernel you can flash through CWM.
http://forum.xda-developers.com/showthread.php?t=1050106
Click to expand...
Click to collapse
this kernal works with all GB roms with sense dont people read its been updated about 10 times since release,
Install MDJ kernel to over clock GB rom.

HTC Desire gingerbread sense roms Undervolt

Guys, is there any undervolt file that we can flash for Gingerbread sense roms to make it more battery efficient?
I guess you are talking about rooted phones with custom sense roms?! Newest version of setcpu can also undervolt:
http://forum.xda-developers.com/showthread.php?t=505419

Modify Virtuous Unity or Sense to use kernel only (or some features)

Hi guys,
I really long try to find a good (and working!!!) OC/UV kernel for my desire z.
Now i tried Viruous Unity and Sense, but there is too much bloat in my opinion.
Now i really want to use that kernel only with its oc and uv features to save battery and gets the device a bit faster.
The unity mod is too big and fills up my intern memory that i get at least 50MB memory free...
Thats a real problem.
Can anyone help me to solve this? To help me to modify the virtuous mod?
With pershoot it will not boot or after boot system will not respond and the phone sticks.
I running HTC stock rom 2.30... With eng-hboot full s-off permroot. If questions needed ask..
Hope for answers. Thanks a lot
Sent from my HTC Vision using XDA
Before everyone shows up with their pitchforks, I'm going to try to help you.
1. HTC Sense ROMs only with with "Sense" kernels (e.g. Unity, Virtuous, RCMiX)
2. AOSP kernels will not work properly with Sense based ROMs (e.g Pershoot, CM, Tiamat, ILWT)
3. Pretty much *Any* ROM is compatible with the Virtuous OC Daemon, or Tsubus' ILWT OC Daemon.
4. OC/UV Beater isn't the overclocking daemon, it's simply used to CONFIGURE and CONTROL the OC daemon.
Based on what I *think* you're trying to say you need, you should stick with Virtuous Vision 2.0, but try using it with an alternative launcher (like LauncherPro or Go Launcher) which will improve your experience (the default Sense launcher "Rosie" is pretty heavy). You may also try heading over to tsubus' ILWT thread, and find the link for his "ILWT OC Daemon". Install it, and you may notice a difference.
If you're looking for speed, use an AOSP ROM (CM7, ILWT, Glite, MIUI) and stay as far away as possible from Sense 3.x ROMs. Hope that helps.
Also, wrong section brah.
Ok in other words: as long as i do not flash a custom rom i cant use oc/uv.
But if i don't like the custom roms there is no chance.
Or is there any AOSP Rom available which looks like the stock rom with Sense 2.x?
Because all the roms looks like the samsung layout.

Help me - choosing a ROM

Hello!
After some months I still can't find any ROM which meet my requirements.
Can you help me make a decision? What I would like to see:
- Android 2.3 (Gingerbread), perchange Android 4.0 (ICS)
- HTC Sense
- Fully working camcoder app, recording in 720p, focus on digital camera and video recorder, no FC's...
- OC to ~1.8 GHz (1843 MHz), I found this setting stable for my phone
- Possiblity to remove any redundant apps like Facebook...
I tried:
- Android Revolution HD (OC OK, annoying camcoder problems...)
- Virtuous Sense (insufficient OC)
- Virtuous G-Lite (insufficient OC, no Sense)
- Virtuous Unity (insufficient OC)
- Virtuous Affinity (stability problems)
- ILWT (insufficient OC, no Sense)
- MIUI (insufficient OC, crappy camcoder)
- CM7 (insufficient OC, no Sense)
I'll be thankful.
if you like the rom but cant overclock to your hearts desire just change the kernel
Sent from my HTC Vision using xda premium
demkantor said:
if you like the rom but cant overclock to your hearts desire just change the kernel
Sent from my HTC Vision using xda premium
Click to expand...
Click to collapse
Advise me then.
pick one of the roms you liked but didnt overclock as far as you wanted then flash a compatible kernel on top of it the same way you flashed your rom
kerenl for the most part go like this:
ics - ics kernel
gingerbread - gingerbread kernel
etc.
also....
sense - sense kernel
aosp (and most cm) - aosp kernel
find a kernel that works with the rom you like and overclock the way youd like
I'd searched "G2 and Desire Z Development" category and I can't find a kernel for Virtuous G-Lite (Sense is not as important for me as O/C and efficiency ). I'm just out of ideas...
well you often wont find a kernel specific to one rom. if the rom you like has a sense base use a sense kernel etc.
Sent from my HTC Vision using xda premium
I can't get it. What if I want to find kernel for Virtuous G-Lite which doesn't have Sense? What to type in searcher?
glite is a 2.3.x rom aosp based, try one of these kernel
http://elite-force.eu/elitemod/MOD_EliteKernel_120319.zip
http://forum.xda-developers.com/showthread.php?t=847672
https://sourceforge.net/projects/ilwtcm7kernel/
they should work fine for you
Try AOKP in tablet mode. Beautiful, everything works, and ICS. I'm running it for 3 days, and I didn't had any lags at all.

Categories

Resources