Develop Bugs

Not another quadrant thread...

Post your quad scores here and remember with out a screen shot (home + power button) it didn't really happen. Dont for get to tell what Rom and kernel your running and the clock you were using. Here is my highest to date
Running on calks Rom using lost kernel at 1.6
Sent from my SPH-D710 using xda premium

mauricehall said:
.....Running on calks Rom using lost kernel at 1.6
Sent from my SPH-D710 using xda premium
Click to expand...
Click to collapse
Nice!
Same set up, I got 4689.

Stock rom and kernel. Tegrak at 1.6
Sent from my SPH-D710 using xda premium

Super Uber Kernel better than the rest Ice Cream with whip cream overclocked to 1.2jwhz. Time travel is now available on your phone.
This post coming to you from 11/5/1955

See sig.
Stock kernel strongsteves odexed ics themed rom
Sent from my SPH-D710 using Tapatalk

bondosho said:
Super Uber Kernel better than the rest Ice Cream with whip cream overclocked to 1.21jwhz. Time travel is now available on your phone.
This post coming to you from 11/5/1955
Click to expand...
Click to collapse

phatmanxxl said:
Click to expand...
Click to collapse
Lol
Sent from my SPH-D710 using XDA App

I am actually surprised that stock kernel with Tegrak is giving higher numbers than our current overclockable kernels. It was never that way on the OG Epic unless you really got brave. 1.4 was safe Max on OG Epic and people got brave and got it to 1.6 with Tegrak and insane voltages...but not daily use stable. Just to run some benchmarks ans snap some screenies. Then there was Marcusant's UberQuadrant terminal command that gave 9000+ quadrants. Its easily tricked but a good tool to gauge differences in your personal setup
Sent from my SPH-D710 using xda premium

JohnCorleone said:
I am actually surprised that stock kernel with Tegrak is giving higher numbers than our current overclockable kernels. It was never that way on the OG Epic unless you really got brave. 1.4 was safe Max on OG Epic and people got brave and got it to 1.6 with Tegrak and insane voltages...but not daily use stable. Just to run some benchmarks ans snap some screenies. Then there was Marcusant's UberQuadrant terminal command that gave 9000+ quadrants. Its easily tricked but a good tool to gauge differences in your personal setup
Sent from my SPH-D710 using xda premium
Click to expand...
Click to collapse
I think it has to do with the source kernel not being 100% compared to the actual kernel that comes on the phone. Was going back and forth with sammy about this and with some recent info from mkasick I'm hoping the next response I get is something along the lines of "Oooh **** our bad here is the correct defconfig"
hey I can dream can't I?

My Score
this is my best score that i have achieved so far. 5223

Here is a good one. My best so far was 5689, but this one is nice. My rom is a mutt between calks and phantoms, kernel is LoSt with my own init.d scripts.

shiftr182 said:
Here is a good one. My best so far was 5689, but this one is nice. My rom is a mutt between calks and phantoms, kernel is LoSt with my own init.d scripts.
Click to expand...
Click to collapse
That's the highest score I've seen so far

shiftr182 said:
Here is a good one. My best so far was 5689, but this one is nice. My rom is a mutt between calks and phantoms, kernel is LoSt with my own init.d scripts.
Click to expand...
Click to collapse
You should so troll the evo3d crowd with that lol.

Lol. I liked that phone, just not as much as this one.

OVerclocked Kernel????

can someone point me to a kernel that i can safely overclock ?????? have el29 phone running ICS with touch wiz

Rogue Gunslinger 1.4.1 I'm using it now, OC'd at 1.5ghz, I had it at 1.6 but 1.5 with my setup actually gives me better performance
Sent from my SPH-D710 using xda premium,

yep, that is the best kernel to OC..

I did it and it just sat in the splash screen and wouldn't boot??????? also why is the hitman kernel pulled???
Sent from my HTC sensation 4g using Tapatalk

Touch recovery doesn't play nice on the et4g and causes hard bricks
Sent from my SPH-D710 using xda premium

-EViL-KoNCEPTz- said:
Touch recovery doesn't play nice on the et4g and causes hard bricks
Sent from my SPH-D710 using xda premium
Click to expand...
Click to collapse
Makes sense but still why does the kernel not let me bout it just gets stuck on splash screen
Sent from my HTC sensation 4g using Tapatalk

dislplin01 said:
el29 running ICS
Click to expand...
Click to collapse
"If you want a Rooted EL13/newer+CWM use the appropriate pre-rooted ODIN thread [EL13/EL26/EL29], then come back here and use Option C to install EL13/newer+CWM (NOTE: a GB kernel/zImage will NOT allow an ICS ROM to boot)"
Theres you answer about why it wont let you boot past the splash screen...

drinxtir said:
"If you want a Rooted EL13/newer+CWM use the appropriate pre-rooted ODIN thread [EL13/EL26/EL29], then come back here and use Option C to install EL13/newer+CWM (NOTE: a GB kernel/zImage will NOT allow an ICS ROM to boot)"
Theres you answer about why it wont let you boot past the splash screen...
Click to expand...
Click to collapse
OK yea I am already rooted can you point me to a ics kernel that I can over clock ???
Sent from my HTC sensation 4g using Tapatalk

Imm using FC22. I had it up to about 1.5 before it started heating up.
Voltage control in Tegrak costs more digital moneys than I have. But the kernel seems pretty stable. No glitches so far.

d2tmo/att/vzw-JB[024]kernel 4 Stock Based ROMs CPU/GPU OC+FauxSound![Aug-08]

ATT and Tmoible SGS3 uses a UNIFIED KERNEL to reduce duplication:
See here:
http://forum.xda-developers.com/showthread.php?t=1785466
Enjoy!

Reserved 1

Thanks mate, I have posted this to the AT&T I747 INDEX

faux the ultimate Kernel Dev is here.

Nicely done sir...
Sent from my SAMSUNG-SGH-I747 using xda premium

only kernel i used on my og atrix thanks faux good to see you here :good:

Thank you for your time, effort, and willingness to share your talent!
While I am very happy with KT's kernel, I am gladly giving yours a try. It seems to be quite the kernel!
Update: Absolutely fantastic so far. Let's see how it fares tomorrow while I'm at work. I'll do more testing later, but I'm already very satisfied.

Love this kernel , very nice !

Thank you sir glad to see your kernel here!
Sent from my SGH-I747 using Tapatalk 2

I get the best battery life from this kernel and ktoonsez kernel. This being the absolute best though.
Sent from my SGH-I747 using Tapatalk 2

Yup hands down the best kernel for i747M at the moment...
Wish list: UV
Sent from my SGH-I747M using Tapatalk 2

What app do i need to download from market to overclock adreno 225, or is it set by default at 480MHz??

I
edmondt said:
Yup hands down the best kernel for i747M at the moment...
Wish list: UV
Sent from my SGH-I747M using Tapatalk 2
Click to expand...
Click to collapse
Go to rootzwiki and the new version includes uv
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2

New version 008 FINALLY fixes the issue of random apps borking the cpu settings! Running cpu intensive apps will no longer change your cpu settings!!!!!
Afaik....faux is the first dev to get this right on this device!
Galaxy S III I747

V. 008 totally hosed my phone. Did a wipe of the cache and devlik before I flashed from 007 to 008 and now I can't boot. I get the Samsung logo and the phone shuts off. Don't even know where to begin right now.

Probably a bad d/l.....refresh 007 and try again
Galaxy S III I747

ferris2375 said:
V. 008 totally hosed my phone. Did a wipe of the cache and devlik before I flashed from 007 to 008 and now I can't boot. I get the Samsung logo and the phone shuts off. Don't even know where to begin right now.
Click to expand...
Click to collapse
Can you get into recovery?
Sent from my SGH-I747M using xda premium

skatin707 said:
Can you get into recovery?
Sent from my SGH-I747M using xda premium
Click to expand...
Click to collapse
Oh crap, my bad for not deleting that post. I deleted it in the other thread I posted, forgot about here. I flashed this first thing in the morning and like a dumbass I flashed the version for AOSP, I'm on stock. Luckily I had a CWM nandroid image so I flashed my boot.img back and was able to boot into the OS.
It was 100% my fault.

ferris2375 said:
Oh crap, my bad for not deleting that post. I deleted it in the other thread I posted, forgot about here. I flashed this first thing in the morning and like a dumbass I flashed the version for AOSP, I'm on stock. Luckily I had a CWM nandroid image so I flashed my boot.img back and was able to boot into the OS.
It was 100% my fault.
Click to expand...
Click to collapse
Oh ok good, I was worried for you! Glad it all worked out. :laugh:

what new in 008??i was on 005 it ran awsome 007 was super hard on my battery life.So far 008 is running but idk about battery life since its only been five minutes and release notes dont say much
Sent from my SAMSUNG-SGH-I747 using xda premium

Are there any FF18 overclock supporting kernels?

I have searched google and here. No dice. Anyone know of one. I am on blazer ics at the moment.
Sent from my SPH-D710 using XDA

The new agats 0.4.2 kernel has over clocking steps. I have it now. I goes up to 1.6 ghz.
Sent from my SPH-D710 using XDA

I thought the over clocking for that didn't stick? Well unless you were using performance
- Sent From My Blu Kuban Themed Tapatalk Like A Boss

That's why all the previous versions are posted there still. Overall, it's still highly debatable if it's working or not. Most say no, one or 2 folks claim it is.
I don't over clock, but I did try it and every cpu app said it wasn't, or it was dropping back. I prefer having a battery that lasts. :laugh:
Agat is awesome tho, I'm sure he'll get to the bottom of the issue and give us a 4.3 soon enough.

Yeah for me using voltage control I didn't have the steps available until I mobile odined the new kernel. I tried 1.3. It worked I just don't like over clocking.
Sent from my SPH-D710 using XDA

The Kuban kernel

(Question) Overclocking...

Well I have been looking around on my own, but really I can't make heads or tails out of any of the various Overclocking apps. I am looking for what the best overclocking app (in your personal opinion/experience is). As far as firmware goes I have;
Firmware - 4.1.2
CyanogenMod Version - 10-20121012-NIGHTLY-epicmtd
Build Number - cm_epicmtd_userdebug 4.1.2 JZO54K eng..20121011.232018 test-keys
Kernal Version - 4.0.42-g5b9b6e6 [email protected] #1 Thu Oct 11 23:28:39 PDT 2012
Sorry if this is more information than needed, but it has been a while since I have messed with an Android, and better to have too much info than not enough.
Thanks for any/all help.
--James.

Nstools
Sent from my PC36100 using xda app-developers app

Bloodwar1988 said:
Well I have been looking around on my own, but really I can't make heads or tails out of any of the various Overclocking apps. I am looking for what the best overclocking app (in your personal opinion/experience is). As far as firmware goes I have;
Firmware - 4.1.2
CyanogenMod Version - 10-20121012-NIGHTLY-epicmtd
Build Number - cm_epicmtd_userdebug 4.1.2 JZO54K eng..20121011.232018 test-keys
Kernal Version - 4.0.42-g5b9b6e6 [email protected] #1 Thu Oct 11 23:28:39 PDT 2012
Sorry if this is more information than needed, but it has been a while since I have messed with an Android, and better to have too much info than not enough.
Thanks for any/all help.
--James.
Click to expand...
Click to collapse
You'll also need to install a kernel that supports OC. I don't think the stock CM10 kernel supports OC.
Sent from my SPH-D700 using xda app-developers app

If you want to try the kernels by the devs that are working on the ns4g modems I know they have a few options from nitest to stock cm and the other simply something kernel (sorry forgot the name they all work great and just be aware overclocking does have its challenges but it has some killer benefits for sure too at the speed and responsiveness. I suggest stick around 1200-1300 but see what feels right to you. Good luck man!
Sent from my SPH-D700 using xda app-developers app
---------- Post added at 05:11 PM ---------- Previous post was at 05:08 PM ----------
arschend said:
You'll also need to install a kernel that supports OC. I don't think the stock CM10 kernel supports OC.
Sent from my SPH-D700 using xda app-developers app
Click to expand...
Click to collapse
It does to a degree I believe. Not anywhere around the old cm9 1200 they brought that back to 1000 stock but you can raise the min up from 100-1000. I would stick around 200 or 400 possibly 800 absolute max. It can be set to different profiles conservative, performance ect
Sent from my SPH-D700 using xda app-developers app

zacnking said:
If you want to try the kernels by the devs that are working on the ns4g modems I know they have a few options from nitest to stock cm and the other simply something kernel (sorry forgot the name they all work great and just be aware overclocking does have its challenges but it has some killer benefits for sure too at the speed and responsiveness. I suggest stick around 1200-1300 but see what feels right to you. Good luck man!
Sent from my SPH-D700 using xda app-developers app
---------- Post added at 05:11 PM ---------- Previous post was at 05:08 PM ----------
It does to a degree I believe. Not anywhere around the old cm9 1200 they brought that back to 1000 stock but you can raise the min up from 100-1000. I would stick around 200 or 400 possibly 800 absolute max. It can be set to different profiles conservative, performance ect
Sent from my SPH-D700 using xda app-developers app
Click to expand...
Click to collapse
Stock cm10 does not support overclocking to any degree... the only kernel that supports overclocking for cm10 is the nitest kernel, but it still has some bugs to be worked out, so unless you're an experienced user I recommend stocking with stock cm10 and not worry about oc until/if epic cm team implements it into the stock kernel....

flastnoles11 said:
Stock cm10 does not support overclocking to any degree... the only kernel that supports overclocking for cm10 is the nitest kernel, but it still has some bugs to be worked out, so unless you're an experienced user I recommend stocking with stock cm10 and not worry about oc until/if epic cm team implements it into the stock kernel....
Click to expand...
Click to collapse
Well it is not so much that I am a noob as it is that I have just not been around for a while. When I broke my last Evo (in July '11) I did not have the cash to buy a new Smartphone so I had been using just a Samsung Restore up until last Monday when I could not take it anymore and bought the Epic.
I will look into the nitest kernel though, thanks for the heads up buddy!

Bloodwar1988 said:
Well it is not so much that I am a noob as it is that I have just not been around for a while. When I broke my last Evo (in July '11) I did not have the cash to buy a new Smartphone so I had been using just a Samsung Restore up until last Monday when I could not take it anymore and bought the Epic.
I will look into the nitest kernel though, thanks for the heads up buddy!
Click to expand...
Click to collapse
Not a problem, that's why I frequent the forum, to try and help out where I can...

flastnoles11 said:
Not a problem, that's why I frequent the forum, to try and help out where I can...
Click to expand...
Click to collapse
Well, I kind of messed up the first time (When flashing the Modem Patch it would give me an error, rebooted the Recovery and it worked though), So I am now on the nitest Kernel.
Thanks again for the heads up buddy. It is greatly appreciated.

Bloodwar1988 said:
Well, I kind of messed up the first time (When flashing the Modem Patch it would give me an error, rebooted the Recovery and it worked though), So I am now on the nitest Kernel.
Thanks again for the heads up buddy. It is greatly appreciated.
Click to expand...
Click to collapse
:thumbup: just remember to post issues on the nitest thread and not the cm10 thread....

So what is the best method to overclock now? I downloaded the NStools that was mentioned, however it will only let me go as high as 1GHz, which I could already do within CM10 itself, so I hardly see a point to that.
I just want to be able to run at a max of 1.2GHz.

Bloodwar1988 said:
So what is the best method to overclock now? I downloaded the NStools that was mentioned, however it will only let me go as high as 1GHz, which I could already do within CM10 itself, so I hardly see a point to that.
I just want to be able to run at a max of 1.2GHz.
Click to expand...
Click to collapse
You have to flash the nitest kernel... if you updated cm10 the kernel was overwritten with the stock one... flash nitest kernel again and you'll be able to overclock... you can't oc unless the kernel supports it.........

flastnoles11 said:
You have to flash the nitest kernel... if you updated cm10 the kernel was overwritten with the stock one... flash nitest kernel again and you'll be able to overclock... you can't oc unless the kernel supports it.........
Click to expand...
Click to collapse
My Kernel version says;
"3.0.46-CM10-nitest-nr-g716d7f6
[email protected] #1
Tue Oct 16 11:0900 WIT 2012"
Sorry for being such a pain on this, just would rather do it once and do it right rather than keep having to restore or reflash stuff.

You may need to enable the oc frequencies... I would post in the nitest thread and see if there is anything you need to do to enable oc....

flastnoles11 said:
Stock cm10 does not support overclocking to any degree... the only kernel that supports overclocking for cm10 is the nitest kernel, but it still has some bugs to be worked out, so unless you're an experienced user I recommend stocking with stock cm10 and not worry about oc until/if epic cm team implements it into the stock kernel....
Click to expand...
Click to collapse
Actually simply cm10 is another kernel that you can overclock with and is based of linario I believs. They have with or without voodoo as well but make sure you are on fc09 or an epic modem. Also nitest has ns4g and epic versions for the phone as well
Sent from my SPH-D700 using xda app-developers app

zacnking said:
Actually simply cm10 is another kernel that you can overclock with and is based of linario I believs. They have with or without voodoo as well but make sure you are on fc09 or an epic modem. Also nitest has ns4g and epic versions for the phone as well
Sent from my SPH-D700 using xda app-developers app
Click to expand...
Click to collapse
Forgot all about that kernel... not having the phone for a week has left me in a daze.... lol... thanks for correcting that for me...
Sent from my SPH-D700 using Xparent Blue Tapatalk 2

flastnoles11 said:
Forgot all about that kernel... not having the phone for a week has left me in a daze.... lol... thanks for correcting that for me...
Sent from my SPH-D700 using Xparent Blue Tapatalk 2
Click to expand...
Click to collapse
Hey that's what makes xda so great is that if I don't know something someone else will or vice versa. I just wish all the epic peeps could get the same phone I do when I upgrade in july!
Sent from my SPH-D700 using xda app-developers app