Develop Bugs

help please stuck on zedomax's kernal!!!!!!

when i go into clockwork recovery i choose to download :
Calkulin's_FORMAT_ALL_for_E4GT that works but this is the problem
Calkulin_'s_E4GT_ROM_v2.0.1a i renamed it to update.zip and when i choose it all clockwork recovery does is say switching stock recovery to workmod recovery and take me to the front page of recovery and when i try to reboot phone it gets stuck on a yellow page....... and it won't let me choose files from sd card help please! the clockworkmod is on like vs 4.0.3... pls help i can't event turn on my phone

Use Odin to flash another kernel.
Sent From My Evo Killer!!!

i checked so many posts and i can't find a .tar file only .zip please find me one?

i tried stock... and still doesnt turn on is my phone fked?

shlomi84 said:
i tried stock... and still doesnt turn on is my phone fked?
Click to expand...
Click to collapse
Now now calm down ... your booting so everything is fine.
just follow the steps in this thread to get your phone booting and workable again ..
http://forum.xda-developers.com/showthread.php?t=1383678

AT&T galaxy s3 softbricked

I was trying to install one of drewgarens touchwiz roms. touchwiz milestone 5 firefly i believe. not the most recent one because i was too lazy . boy was that a mistake. everything was going smoothly until it booted and it got stuck on boot. I thought no big deal just go into recovery and use a backup. until i did so and recovery was gone and there was only download mode. I have spent the whole afternoon trying to fix it and none of it has worked. I tried flashing the stock rom and it as well got stuck on boot. I looked at all the AT&t relevant ones and also the international versions. so all in all is there anyway to fix this and has anyone had the same issue? i was flashing from cyanogenmod 10 m1 to the drewgaren rom btw. I can also go to download mode. I tried to flash stock but it still gets stuck on boot. log. I flashed the ATT boot logo and it did not work. all of which were flashed through odin.
any thanks in advance is greatly appreciated.

I think you can flash back to stock with just download mode + odin

Randomacts said:
I think you can flash back to stock with just download mode + odin
Click to expand...
Click to collapse
I already tried that. It still get stuck on the Boot logo

stuart26 said:
I already tried that. It still get stuck on the Boot logo
Click to expand...
Click to collapse
I can't help you but I wish you luck.

stuart26 said:
I already tried that. It still get stuck on the Boot logo
Click to expand...
Click to collapse
Unplug your device. Hold the power button to turn it off. Hold volume up, home, and power. It should go to recovery. If you do the same thing with volume down instead of up, you can get into download mode.
Sent from my SAMSUNG-SGH-I747 using xda premium

Sounds like you need a recovery...try this
http://forum.xda-developers.com/showthread.php?t=1746665
[SAMSUNG GALAXY S3 QCOM TOOLKIT V2.3] Drivers Backup Root CWM BusyBox + MORE [ATT]
Follow the instructions and you should be able to flash the recovery and continue on with what you were doing. Remember to wipe really good when going from aosp back to any stock based ROM. They are completely different and will cause boot loops if you don't wipe.

jethro650 said:
Sounds like you need a recovery...try this
http://forum.xda-developers.com/showthread.php?t=1746665
[SAMSUNG GALAXY S3 QCOM TOOLKIT V2.3] Drivers Backup Root CWM BusyBox + MORE [ATT]
Follow the instructions and you should be able to flash the recovery and continue on with what you were doing. Remember to wipe really good when going from aosp back to any stock based ROM. They are completely different and will cause boot loops if you don't wipe.
Click to expand...
Click to collapse
I cannot enable usb debugging

Crap...there are Odin flashable versions of cwm floating around you'll need to find one of those. If you haven't found one I'll post one up when I get home.

jethro650 said:
Crap...there are Odin flashable versions of cwm floating around you'll need to find one of those. If you haven't found one I'll post one up when I get home.
Click to expand...
Click to collapse
K I made it home lol. I'll attach a Odin flashable cwm, it's an older one but it'll get you a recovery, I hope. I just tried it on my phone with Odin, 3.07 both with usb debugging enabled and disabled on my phone and it worked both times. Crap keep getting errors uploading right to xda servers, I'll drop box it in a minute.
Ok here we go Odin cwm--> https://dl.dropbox.com/u/28590257/Odin recovery/CWM-Recovery-LTE-SGS3-v4.tar.md5
Newest twrp --> https://dl.dropbox.com/u/28590257/Odin recovery/twrp2.3.1install.zip
I'll add the newest twrp for you lol. Flash the cwm with odin, should work and then the twrp is a zip you can flash in cwm.
Hope this helps get you a recovery.
Remember in Odin use only PDA and only have auto reboot checked.

jethro650 said:
K I made it home lol. I'll attach a Odin flashable cwm, it's an older one but it'll get you a recovery, I hope. I just tried it on my phone with Odin, 3.07 both with usb debugging enabled and disabled on my phone and it worked both times. Crap keep getting errors uploading right to xda servers, I'll drop box it in a minute.
I'll add the newest twrp for you lol. Flash the cwm with odin, should work and then the twrp is a zip you can flash in cwm.
Hope this helps get you a recovery.
Remember in Odin use only PDA and only have auto reboot checked.
Click to expand...
Click to collapse
This may sound like a stupid question but what boxes do i tick in odin?

After your hooked up and Odin is open under the options on the left side check only Auto Reboot. On the right under files check PDA and use that button to browse your computer and find the cwm you downloaded from my dropbox. Then just hit start on the bottom of the Odin window and let it finish, your phone should reboot when its done. It will get stuck again like you described in your first post but pull the battery, put it back in and boot into recovery using vol up,home and power buttons. That should (if everything flashed OK) put you into cwm 5.5.0.4. Once there wipe data/factory reset then restore the back up you mentioned in your original post, that should get you running again.
---------- Post added at 06:05 PM ---------- Previous post was at 05:55 PM ----------
If something has happened to your backup then you could try the stock rooted stuff here , just pick the one for your carrier and follow the instructions. :highfive:

jethro650 said:
After your hooked up and Odin is open under the options on the left side check only Auto Reboot. On the right under files check PDA and use that button to browse your computer and find the cwm you downloaded from my dropbox. Then just hit start on the bottom of the Odin window and let it finish, your phone should reboot when its done. It will get stuck again like you described in your first post but pull the battery, put it back in and boot into recovery using vol up,home and power buttons. That should (if everything flashed OK) put you into cwm 5.5.0.4. Once there wipe data/factory reset then restore the back up you mentioned in your original post, that should get you running again.
---------- Post added at 06:05 PM ---------- Previous post was at 05:55 PM ----------
If something has happened to your backup then you could try the stock rooted stuff here , just pick the one for your carrier and follow the instructions. :highfive:
Click to expand...
Click to collapse
I was able to get it into recovery but i realized i did not have my sd card in so i turned it off and put my sd card in. unfortunately i was not able to get it back into recovery i tried flashing it again with the sd card in and no luck

That's odd. Couple of stupid questions on my part just to make sure, you had the right button combo, and, you released the buttons soon as the splash screen came on? Can you still get into download mode? Oh and did you do the wipes while in recovery?

jethro650 said:
That's odd. Couple of stupid questions on my part just to make sure, you had the right button combo, and, you released the buttons soon as the splash screen came on? Can you still get into download mode? Oh and did you do the wipes while in recovery?
Click to expand...
Click to collapse
oh my gosh THANK YOU SOOOMUCH. I was worried i would have to take it to at&t ill be sure to press the thanks button.

I take it you got your phone working lol. Glad I could help a little. Little advice, anytime you switch to a different type of ROM (aosp to stock based or the other way around) make sure you wipe data/factory reset before flashing anything. It will save you problems in the long run.
Oh and could you go back and edit your original post and just add solved in brackets to the title for people in trouble looking for info.

stuart26 said:
I already tried that. It still get stuck on the Boot logo
Click to expand...
Click to collapse
Depending on which stock ROM you flashed with odin you should now have a recovery, if not then something isn't right. The full bone stock ROM should have the factory 3e recovery, and the root injected stock ROM should have some version of CWM recovery. A factory reset will most likely fix your boot loop, if there is no recovery flash the rooted stock ROM that matches your device from this guide.
Edit - Didn't see there was a second page 0_o

[Q] Someone help, Samsung Galaxy S3 wont boot.. :((

Hello, I honestly hope someone can help me !!
My phone won't boot up at all. I keep getting the Samsung logo with the words "recovery booting...." in the top left corner but it never boots into recovery mode.. I'm able to go into the other mode(forgot the name of it) but anything I flash in Odin fails.. Does any have any ideas on how I can get my phone back up and running.? I really need your help
What cause this..?
I wanted to flash a rom so I booted into recovery but didn't know how to backup my phone using Android System Recovery 3e. There was no option for backup. I then proceeded to flash cwm_Superuser_v3.0.7. When I tried to reboot after the "pass" flash, it never went into recovery and now everytime I take the battery out and try to turn it on, it still wants to try to reboot into recovery... ( HELP ME PLEASE..!!!

http://goo.im/devs/billard412/d2spr/Prerooted_Odin_tar_files/(NO_WIPE)SPR_L710VPBLJ7_ROOTED_JB.7z stock with root just flash in odin. From there since you'll have root access already just download goo manager and use it to flash a twrp recovery if u need it.

I'll try that right now and let you know what happens. Thanks
What's the best thing to do if Odin keeps failing.?

Check your drivers. Switch USB ports. Swap the USB cable. Reboot pc

billard412 said:
Check your drivers. Switch USB ports. Swap the USB cable. Reboot pc
Click to expand...
Click to collapse
Still fails... I think because it's trying to boot into recovery but it isn't there..

RedyRock said:
Still fails... I think because it's trying to boot into recovery but it isn't there..
Click to expand...
Click to collapse
The odin flash is a one click fix all type of deal. You do have the phone in download mode while you're attempting this right?

ODIN!!!! I love it.
---------- Post added at 06:09 PM ---------- Previous post was at 06:08 PM ----------
woops...I hate that feeling...sorry

From what I've read you don't have CWM .. You have the stock recovery..You can't flash ROMS in stock recovery.. Does your phone boot up at all?
Personally TWRP is a better custom recovery anyway in my opinion.. CWM is so outdated..

RedyRock said:
Hello, I honestly hope someone can help me !!
My phone won't boot up at all. I keep getting the Samsung logo with the words "recovery booting...." in the top left corner but it never boots into recovery mode.. I'm able to go into the other mode(forgot the name of it) but anything I flash in Odin fails.. Does any have any ideas on how I can get my phone back up and running.? I really need your help
What cause this..?
I wanted to flash a rom so I booted into recovery but didn't know how to backup my phone using Android System Recovery 3e. There was no option for backup. I then proceeded to flash cwm_Superuser_v3.0.7. When I tried to reboot after the "pass" flash, it never went into recovery and now everytime I take the battery out and try to turn it on, it still wants to try to reboot into recovery... ( HELP ME PLEASE..!!!
Click to expand...
Click to collapse
It sounds to me like you didn't have debugging enabled on the phone,or didn't flash the cwm recovery tar in odin correctly, and jumped a step. I would completely start over, making sure you have the phone drivers installed correctly, then install the custom recovery.

Yeah, I tried everything but it failed everytime.. I fixed my phone tho, I used another laptop.
For some reason my laptop don't like Odin. I uninstalled the Samsung drivers, got rid of Odin, reinstalled everything, tried again but it still failed.. I don't know why my laptop is doing that but I got it now.
Thanks everyone for your help.!

Ok, so I am not a noob..But I hadn't flashed anything since owning my orginal Evo..I followed all the steps for chain fire's root and have root access. I installed TWRP and haven't played with any gs3 roms yet so I went into twrp's list of compatible roms. I downloaded carbon and gapps. I tried to flash. What happens now is the same thing as this poster above me. I can boot into download mode at which point I attempted odin..after that process I booted up and still no recovery. I did manage to flash Carbon, just very poorly apparently, because all that happens when I boot up is that is says startup wizard has failed and gapps has failed..Should I try to use odin with the link provided above as well?

Sprint Note 2 bricked

Hello everyone i got a note 2 sprint bricked. I used odin and it keeps saying failed at sboot.bin right after recovery.please help if you can thanks.

carshass said:
Hello everyone i got a note 2 sprint bricked. I used odin and it keeps saying failed at sboot.bin right after recovery.please help if you can thanks.
Click to expand...
Click to collapse
You need to post more info if possible but it sounds like you are trying to downgrade from MA7 to an earlier firmware like LK8. The update included a security patch so it won't let you go back to insecure. Try pulling the sboot out of whatever you are trying to flash or stick with MA7
Sent from my SPH-L900 using xda app-developers app

Try downloading another .tar file for ljc. I had the same issue. I believe i got a working one directly from samfirmware
Sent from my SPH-L900 using xda app-developers app

oook,, so im new to the note2 just came from a gs2 with jellybam on it...soo im running jellybomb and i flashed venum ice reborn 1.5 it seemed to fash fine until reboot,, then it just hung on the note2 bootup screen. i hold down home and power and it says up to download custom rom down to restart... both jut hang. help?
i got as far as trying to find odin but i couldnt and stopped.

shangus1 said:
oook,, so im new to the note2 just came from a gs2 with jellybam on it...soo im running jellybomb and i flashed venum ice reborn 1.5 it seemed to fash fine until reboot,, then it just hung on the note2 bootup screen. i hold down home and power and it says up to download custom rom down to restart... both jut hang. help?
i got as far as trying to find odin but i couldnt and stopped.
Click to expand...
Click to collapse
umm ya i see why i didnt get a reply.. all i had to do was hold volume up home power and the n re flash... its amazing what you can figure out inhere when ignored lolz

carshass said:
Hello everyone i got a note 2 sprint bricked. I used odin and it keeps saying failed at sboot.bin right after recovery.please help if you can thanks.
Click to expand...
Click to collapse
I've been having the same problem for a couple days now. I can install a custom rom but I can't figure out how to get back to stock.
You need to post more info if possible but it sounds like you are trying to downgrade from MA7 to an earlier firmware like LK8
Click to expand...
Click to collapse
That might be the problem I'm having.
EDIT:
Yep, that was it. Thanks!

carshass said:
Hello everyone i got a note 2 sprint bricked. I used odin and it keeps saying failed at sboot.bin right after recovery.please help if you can thanks.
Click to expand...
Click to collapse
It's not brick cuz odin can still see your phone. If you dont have TWRP on it, go to www.twrp.com and download the tar file for sprint note 2. Then use Odin to flash it. Once you are done that, go here http://forum.xda-developers.com/showthread.php?t=2086769 to get either the old LJC or MA7 and put it in your phone either internal or external SD. Do the wipe cache/factory reset first. Then flash it. It will go back to stock rom.

Help
Hello even though its old I figured I would post here first instead of starting a new thread, my friend has a Note 2 for Sprint never rooted or custom ROM flashed and he said it was sitting on the charger and when he woke up in the morning it was off and after attempting to power the device on it stays stuck on the Samsung logo. I cant get Kies to recognize the device at all not matter what pc is use however it shows up in Odin but it fails everything from stock files ( older and current ) , different versions of Odin, recoveries and I even tried a " unbrick .tar file " . Any help at all would be appreciated I will include pics

demorik said:
Hello even though its old I figured I would post here first instead of starting a new thread, my friend has a Note 2 for Sprint never rooted or custom ROM flashed and he said it was sitting on the charger and when he woke up in the morning it was off and after attempting to power the device on it stays stuck on the Samsung logo. I cant get Kies to recognize the device at all not matter what pc is use however it shows up in Odin but it fails everything from stock files ( older and current ) , different versions of Odin, recoveries and I even tried a " unbrick .tar file " . Any help at all would be appreciated I will include pics
Click to expand...
Click to collapse
Can you odin a custom recovery and boot into it?
1. Put phone in download mode
2. In odin program uncheck reboot and flash recovery
3. After flash disconnect phone and pull battery
4. Quickly insert and remove battery multiple times (if you just reinsert battery it will automatically boot)
5. Boot phone into recovery backup any important data that is on your internal sdcard
6. Do factory reset then flash billards stock mc2 with counter reset (do not wipe cache after flashing this)
7. Flash superuser zip found in billards Op
8. Reboot phone and freakout when see the screen do odd things and reboot (this is normal)
Now it will bootup on stock rooted mc2.
Sent from my SPH-L900 using XDA Premium 4 mobile app

jlmancuso said:
Can you odin a custom recovery and boot into it?
1. Put phone in download mode
2. In odin program uncheck reboot and flash recovery
3. After flash disconnect phone and pull battery
4. Quickly insert and remove battery multiple times (if you just reinsert battery it will automatically boot)
5. Boot phone into recovery backup any important data that is on your internal sdcard
6. Do factory reset then flash billards stock mc2 with counter reset (do not wipe cache after flashing this)
7. Flash superuser zip found in billards Op
8. Reboot phone and freakout when see the screen do odd things and reboot (this is normal)
Now it will bootup on stock rooted mc2.
Sent from my SPH-L900 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I have tried but I never tried to uncheck anything in Odin, I will try it later and post the results thanks.

say my brother it still doesnt let me boot into recovery what do i do...
jlmancuso said:
Can you odin a custom recovery and boot into it?
1. Put phone in download mode
2. In odin program uncheck reboot and flash recovery
3. After flash disconnect phone and pull battery
4. Quickly insert and remove battery multiple times (if you just reinsert battery it will automatically boot)
5. Boot phone into recovery backup any important data that is on your internal sdcard
6. Do factory reset then flash billards stock mc2 with counter reset (do not wipe cache after flashing this)
7. Flash superuser zip found in billards Op
8. Reboot phone and freakout when see the screen do odd things and reboot (this is normal)
Now it will bootup on stock rooted mc2.
Sent from my SPH-L900 using XDA Premium 4 mobile app
Click to expand...
Click to collapse

[Q] Sprint Note 2 (SPH-L900) Bricked after attempted 4.3 Update

I've been having issue with my Sprint Note 2 for a while. I've also posted this to Reddit and other parts of the forum but so far have gotten no way to fix my issue. Here's the link to Reddit: http://www.reddit.com/r/techsupport...nt_note_2_sphl900_bricked_after_attempted_43/
Sorry, I didn't want to type that all up again and having to deal with formatting and such.
Basically, the gist of it, from what I can gather is that I have accidentally loaded the 4.3 bootloader with KNOX and it is currently preventing me from doing anything productive (flashing CWMR, rooting, installing stock, etc). I read here on the forum that there were ways to do so, especially this post: http://forum.xda-developers.com/showthread.php?p=46861777
I was wondering if there were steps for the Sprint Note 2 SPH-L900?
Any help in debricking my phone is appreciated.

Try these steps.
1. Boot phone into Odin/download mode
2. Flash twrp or cwmr via Odin.
3. When it reboots pull battery and then boot into recovery.
4. Flash this http://forum.xda-developers.com/showthread.php?p=36388145 it is mc2 bootloader, firmware, radio, etc...
5. Reboot phone. Things get weird for a few mins but it will boot.
You are now Knox free once again but you are also bone stock.
Sent from my SPH-L900 using XDA Premium 4 mobile app

jlmancuso said:
Try these steps.
1. Boot phone into Odin/download mode
2. Flash twrp or cwmr via Odin.
3. When it reboots pull battery and then boot into recovery.
4. Flash this http://forum.xda-developers.com/showthread.php?p=36388145 it is mc2 bootloader, firmware, radio, etc...
5. Reboot phone. Things get weird for a few mins but it will boot.
You are now Knox free once again but you are also bone stock.
Sent from my SPH-L900 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I've tried that multiple times. The problem here is that I can't load CWMR or TWRP. At first, I assume that I'd have to root so I downloaded the CF auto root file and flash it using ODIN. Then I tried installing CWMR (after converting to .tar using Caboomi's tool here on the forum). It would reboot and I tried holding down volume up + power + home button but nothing would happen. I try combinations of that and still nothing. I flashed the 4.3 sboot.bin to get it back to stock Samsung bootloader then retried with CWMR without rooting first this time and it still doesn't work. ODIN would tell me that it succeeds but I can't enter Recovery no mater the combination of keys that I press. I'm assuming this has to do with Knox in which case I'd just have to wait for the official 4.3 firmware on SamMobile to flash it since stock 4.1.2 won't work.

QuantumInteger said:
I've tried that multiple times. The problem here is that I can't load CWMR or TWRP. At first, I assume that I'd have to root so I downloaded the CF auto root file and flash it using ODIN. Then I tried installing CWMR (after converting to .tar using Caboomi's tool here on the forum). It would reboot and I tried holding down volume up + power + home button but nothing would happen. I try combinations of that and still nothing. I flashed the 4.3 sboot.bin to get it back to stock Samsung bootloader then retried with CWMR without rooting first this time and it still doesn't work. ODIN would tell me that it succeeds but I can't enter Recovery no mater the combination of keys that I press. I'm assuming this has to do with Knox in which case I'd just have to wait for the official 4.3 firmware on SamMobile to flash it since stock 4.1.2 won't work.
Click to expand...
Click to collapse
After flashing cwm do battery pull...Don't let it auto-reboot.
Also try different version of Odin maybe

louforgiveno said:
After flashing cwm do battery pull...Don't let it auto-reboot.
Also try different version of Odin maybe
Click to expand...
Click to collapse
I tried 3.07, 3.09, and even barebone 1.85 that came with CF auto root. It doesn't work. I can't load recovery just fine (according to ODIN) but I can't get into Recovery.

Here is the fix https://www.dropbox.com/s/s2clvyo4y6gar6s/4.3_Unbrick.tar
I promise this will fix your issue, but when you get done, you will be on MC2 with the 4.3 bootloader, but, it will boot, let you flash recovery and everything. I know this because I did the same thing as you and flashed the old cf-auto root and bricked my phone to, and I created this file to fix it and if you look in the help section, you will find my thread on how to unbrick after 4.3 update fail.
I promise though, this will fix your fone

Keithgordon said:
Here is the fix https://www.dropbox.com/s/s2clvyo4y6gar6s/4.3_Unbrick.tar
I promise this will fix your issue, but when you get done, you will be on MC2 with the 4.3 bootloader, but, it will boot, let you flash recovery and everything. I know this because I did the same thing as you and flashed the old cf-auto root and bricked my phone to, and I created this file to fix it and if you look in the help section, you will find my thread on how to unbrick after 4.3 update fail.
I promise though, this will fix your fone
Click to expand...
Click to collapse
...My God..... What ever you did, it worked. Turns out, Caboomi's file didn't work too well. I couldn't get CWMR working at all even after converting to .tar. I used TWRP instead and it works. Problem was that it asked me for my password, which I don't know since I tried everything, so I had to resort to wiping everything. I installed the file jlmancuso suggested, loading it onto SD card then flashing using TWRP, and now my Samsung Note 2 is debricked.
Your file was a godsend. Thank you!

No recovery stuck on bootloop
im having the same issue could you post that dropbox link again

So i was able to get recovery back but it wont let me mount my sd card so i cant flash anything through recover was hoping the file you have could be loaded through odin as it is a .tar file correct please help and thanks in advance.
Keithgordon said:
Here is the fix https://www.dropbox.com/s/s2clvyo4y6gar6s/4.3_Unbrick.tar
I promise this will fix your issue, but when you get done, you will be on MC2 with the 4.3 bootloader, but, it will boot, let you flash recovery and everything. I know this because I did the same thing as you and flashed the old cf-auto root and bricked my phone to, and I created this file to fix it and if you look in the help section, you will find my thread on how to unbrick after 4.3 update fail.
I promise though, this will fix your fone
Click to expand...
Click to collapse

rckingws6 said:
So i was able to get recovery back but it wont let me mount my sd card so i cant flash anything through recover was hoping the file you have could be loaded through odin as it is a .tar file correct please help and thanks in advance.
Click to expand...
Click to collapse
Yes, flash that file in Odin, it will downgrade you to MC2 with the MK4bootloader

Keithgordon said:
Yes, flash that file in Odin, it will downgrade you to MC2 with the MJA bootloader
Click to expand...
Click to collapse
MJA ? Isn't that an s4 bootloader?

louforgiveno said:
MJA ? Isn't that an s4 bootloader?
Click to expand...
Click to collapse
yep, sorry, I just woke up....I meant whatever version we are on with the note, what is it? MK4? I have both so I keep switching back and forth in the threads. Funny thing is, they are completely different, i will change that, thanks for pointing that out

my friend 's L900 bricked too ，but I cant download the file you provide , the error message is “Error (509) This account's public links are generating too much traffic and have been temporarily disabled”
may you provide another URL to download it or mail it to me ？ my email is [email protected] , thanks.
another question , how can i flash it into device with ODIN ？ from Pit ？ bootloader ？PDA ？PHONE ？ or others ？
Sent from my SPH-L900 using xda app-developers app
---------- Post added at 06:23 PM ---------- Previous post was at 06:14 PM ----------
Keithgordon said:
yep, sorry, I just woke up....I meant whatever version we are on with the note, what is it? MK4? I have both so I keep switching back and forth in the threads. Funny thing is, they are completely different, i will change that, thanks for pointing that out
Click to expand...
Click to collapse
my friend 's L900 bricked too ，but I cant download the file you provide , the error message is “Error (509) This account's public links are generating too much traffic and have been temporarily disabled”
may you provide another URL to download it or mail it to me ？ my email is [email protected] , thanks.
another question , how can i flash it into device with ODIN ？ from Pit ？ bootloader ？PDA ？PHONE ？ or others ？
Sent from my SPH-L900 using xda app-developers app

yea I still cant dowload it sorry for being a pest.
Keithgordon said:
Yes, flash that file in Odin, it will downgrade you to MC2 with the MK4bootloader
Click to expand...
Click to collapse

hello if you are online i need some help i dl the 4.3 note 2 update it has a different build than the one sprint has there are some features that are not on this build is there any way for me to get the ota from sprint
rckingws6 said:
yea I still cant dowload it sorry for being a pest.
Click to expand...
Click to collapse

rckingws6 said:
So i was able to get recovery back but it wont let me mount my sd card so i cant flash anything through recover was hoping the file you have could be loaded through odin as it is a .tar file correct please help and thanks in advance.
Click to expand...
Click to collapse
Try using TWRP instead. It gives you the option to mount an external SD card. Also try restarting into recovery again. I had Recovery bugged out on me once.

QuantumInteger said:
Try using TWRP instead. It gives you the option to mount an external SD card. Also try restarting into recovery again. I had Recovery bugged out on me once.
Click to expand...
Click to collapse
i need some help

yea i can get into twrp recovery now but my sdcard wont mount thats why im trying to use odin
QuantumInteger said:
Try using TWRP instead. It gives you the option to mount an external SD card. Also try restarting into recovery again. I had Recovery bugged out on me once.
Click to expand...
Click to collapse

For those of you who have bricked Note 2s (SPH-L900), I'm going to drop a DropBox link here to a folder of ALL of the files that I used to unbrick my phone. I experimented with multiple methods (and several sleepless nights). Some of them will be useful to you, not all. I have the Android SDK and Caboomi's converter for .img to .tar. It doesn't work too well for CWMR just FYI. ODIN-OC will attempt to load stock MC2 onto your phone but it won't work if it's bricked. Arc Converter is a program I used to try convert the MK4 .zip file to .tar to try and flash an update using ODIN. It didn't work. The steps that I took to unbrick my phone will be posted after the link.
https://www.dropbox.com/sh/c2bfpfdf0qbs6bu/ZiNC-BF5kf
Be patient. Some of the files are still updating.
Steps:
1) Put your phone into Download mode by holding volume down + power + home button at bootup
2) Use ODIN (3.07 or 3.09) to load the 4.3_Unbrick.tar file. This will take a bit of time so be patient. Once the phone boots up again, you'll get past the boot screen that says "Samsung Galaxy Note II" and you'll get the Samsung logo with the spinning icon but it will loop. This is normal.
3) Next, power off (yank the battery and cable, leave battery out but plug the cable back in) and reboot into download.
4) Flash the TWRP .tar file (don't try converting the CWMR to .tar, it won't work) then reboot.
5) Hold volume up + power + home button (be patient here)
6) You should see the Team Win logo. You're now in recovery. The TWRP may ask you for the password. It is NOT the passcode to your lockscreen or your Google password. I have no idea what it is. At this point, you'd have to wipe your phone (internal only) if you want to flash the stock recovery.
7) Load the MC2 stock recovery file with counter reset onto a microSD card and mount it onto the phone (play around with TWRP, if it doesn't see the SD card the first time, restart or play with the mount function). Just be careful not to wipe your microSD card.
8) Flash the stock recovery (give it time) and it'll restart. You should be back at 4.1.2.
EXTRA STEPS
If you're still interested in 4.3, load the MK4 update onto the microSD card as well. BEFORE you go through the activation process for the 4.1.2 firmware at boot, boot into recovery. Flash the 4.3 update using stock recovery. This should put you onto 4.3 after the phone reboots. You should now have stock 4.3 (no root).

Sorry for all the download errors, I am uploading to my websight right now and as soon as it uploads, I will post the URL, it should download much faster too. I didnt realize so many people needed it