Dust Under Digitizer??? - Verizon Droid Incredible 2

Hello, I got my DINC2 from fry's electronics on sale. I have already got it replaced three times. The first one had a software problem, just a couple days after I got it. The second one had a cluster of dead pixels on the screen, and also had problems with the capacitive buttons. What surprises me is that those were not refurbished, they were NEW phones! This one, my third replacement has dust on the bottom left corner of the screen. It is annoying in the sun, but not nocitible indoors. It is rooted, but that can be undone, I am hesitant to replace it because I don't want to get one with real issues. It is also out of the 30 day warrenty. Is there a way to remove the digitizer and clean under it without breaking anything?
Sent from my ADR6350 using XDA App

There are some vids on Youtube on removing the digitizer. I don't know though if you could reuse the digitizer though. I would imagine that you could as long as it's not damaged in the removal process.
It's not a bad process, but heating the glass to soften the glue could be the tricky part.

Related

Dust under dEsire screen...

I notice a piece of lint under the glass on my desire. Not highly noticable, but still... I suppose its kind of impossible to make a screen thatsize and have it sealed with zero foreign objects undreneath? I read that this was a common problem with the nexus one. not sure if its common on Desire, or if the dust was there when I bought it, or got in in the last 3 days.
I wouldn't consider replacing it or anything, not over that. Maybe over a dead pixel, buit not some lint. anyone else notice anything under their glass?
yup got same, a tiny piece above the menu key, about 2 mil from the bottom edge of the screen. not enough for me to send it back though.
Sent from my HTC Desire using the XDA mobile application powered by Tapatalk
yeah I read quite a few threads on the matter. Theres a good chance you'd get the same in a replacement model so not worth it if its minor. Loving the phone though. some piece of kit
I didn't notice anything under the glass screen so far. I got mine on March 27th.
mcgon1979 said:
I suppose its kind of impossible to make a screen thatsize and have it sealed with zero foreign objects undreneath?
Click to expand...
Click to collapse
Well that's not true. I have had an HD2 for several months now and as we know it has an even bigger screen than the desire.
My point is that I have absolutely NO dust particles under my glass. I have looked and looked, under sunlight etc. NO dust. Why? Cus on the HD2, the LCD is glued to the glass/digitizer wich makes it impossible for dust to get in. On the Desire, I believe this is not the case wich means dust will eventually build up under there with time.
Halle said:
My point is that I have absolutely NO dust particles under my glass. I have looked and looked, under sunlight etc. NO dust. Why? Cus on the HD2, the LCD is glued to the glass/digitizer wich makes it impossible for dust to get in. On the Desire, I believe this is not the case wich means dust will eventually build up under there with time.
Click to expand...
Click to collapse
Alas you are right. I have more dust under my screen than I did when I got the phone 2 months ago. So... I guess it's not airtight. well, not that I expected it would be. maybe they could not glue the amoled screen to the digitiser/glass in the amoled screens. who knows.
solution
ive posted a reply about this on the phone restarting thread. essentially htc said that BOTH the dust and phone restarting are their problem so ive had the phone replaced within a week
This is a massive problem with the Topaz. Dust gets in by the top of the volume key. Thankfully it's only noticeable with the phone switched off, so it's not serious issue, just very prevalent.
HTC need to improve their sealing process between digitisers and their screens.
I had dust under the screen after 1 week on the left hand side. Pretty bad design fault from HTC if you ask me. On my old HTC Magic dust came in from the speaker grille and then fell down from the top of the screen.
Back on the desire though I got a case and screen protector from amazon and no more dust has appeared since then.
jaymit said:
ive posted a reply about this on the phone restarting thread. essentially htc said that BOTH the dust and phone restarting are their problem so ive had the phone replaced within a week
Click to expand...
Click to collapse
Cheers. I've contacted support, but I doubt they would replace the phone. We'll see.
mcgon1979 said:
Cheers. I've contacted support, but I doubt they would replace the phone. We'll see.
Click to expand...
Click to collapse
They offered to take it in for repair (as opposed to replacement). Ah well. I'll hold onto it as its minor. I heard of some guy on here sending it off for repair only to get it back with more dust in it than originally.
I think the best thing is to examine the unit on the first day of purchase with a fine tooth comb. If anything is wrong then send it back to clove or hantec or whoever for a direct swap replacement. Next time... When Desires future heir is born I will do that.

Digitizer replacement

Hi, has anyone replaced their digitizer on their desire z/g2? How did it go? It looks easy on the youtube vid.. have any problems? What way did you use to melt the glue? What digitizer did you use, where from?
Any info much appriciated as will be replaceing mine v soon due to 'invisible finger problem' that's driving me nuts..
Thanks..
Sent from my HTC Vision using XDA App
Never done it on a g2 but should be pretty straight forward especially with a video lol. Use a heat gun to melt the glue, pretty much the only tool you SHOULD use to do something like that.
I replaced the digitizer on my third G2 after getting a refurb replacement from T-Mobile that had a black spot inside the actual digitizer glass, not on the outside or inside.
The process is very easy with the video, however, trying to keep dust and fingerprints from getting on the inside of the phone while you're trying to get it back together is a serious pain in the rear! If it's the same video that I watched, just use a hair drier blowing hot air to heat the adhesive on the inside of the digitizer and then pop the digitizer off very very slowly, because you don't want to accidentally bend the metal bezel around the screen.
You also may want to leave the original leftover adhesive on the inside, because when I cleaned mine off, light now always leaks out around the bottom edge of the digitizer, below the menu, home, and search buttons, even though I used the double sided adhesive strips covering the entire length of the bottom, so light shouldn't technically be leaking out. No biggie, though... it works like brand new, now!
Thanks for the reply.. I have seen that video and that's what I was using as a guide.. I ordered the digi today, should be here tomorrow.. the only thing I was wondering was the glueing process, as I have not ordered the double sided glue/tape stuff, as I was just hopeing to still use the original glue as I think you are saying.. I hope that works! Have to be careful like u say with dust/fingerprints etc..
Sent from my HTC Vision using XDA App
Hmm, after reading your post again, maybee I should of bought the double sided tape afterall? Do you think the old leftover glue is enough for the new digi?
Many thanks..
Sent from my HTC Vision usingall XDA App
Run over to radio shack they must have some kind of glue you can use lol. google cell phone screen glue see what info you can find.
Ok, just incase anyone is interested, got my new digitizer, followed the video, used a heat gun cerfully to melt the glue, pulled the old digitizer out, and used the original glue whilst still warm to hold the new digi in, as all of glue stayed on the case rather than on the digi, which was pretty lucky.. put it all back together and everything perfect, touchscreen back to how it should be.. cost me 17 pounds.
Sent from my HTC Vision using XDA App
How was this accompilshed?
I replaced the touch screen as well and the problem persists. Plus I never ran into a part that required a heat gun did I use the wrong item?
A VERY confusing part is getting the midframe to hold to the hinge mounts. The side (black dots all down it) should overlap the stabilizer bar on the hinge. I fidgeted with it for hours until realizing it goes over, and inadvertently damaged the highly sensitive LCD screen, which resulted in me taking the whole thing apart again to replace the LCD and digitizer. UGH!
DO NOT get the cheapo digitizer on Amazon, look for one with gray spots where the menu, home, back and search keys are on the back side. The digitizers without them will not work when you swap over the white button caps on the back. I feel like this information is vital to anyone who is replacing their G2 digitizer, but most guides and videos make no mention of it.
I used a lamp to heat up the glass to remove it the first time. Took too long the second time so I used a hair dryer.
senser1080 said:
A VERY confusing part is getting the midframe to hold to the hinge mounts. The side (black dots all down it) should overlap the stabilizer bar on the hinge. I fidgeted with it for hours until realizing it goes over, and inadvertently damaged the highly sensitive LCD screen, which resulted in me taking the whole thing apart again to replace the LCD and digitizer. UGH!
DO NOT get the cheapo digitizer on Amazon, look for one with gray spots where the menu, home, back and search keys are on the back side. The digitizers without them will not work when you swap over the white button caps on the back. I feel like this information is vital to anyone who is replacing their G2 digitizer, but most guides and videos make no mention of it.
I used a lamp to heat up the glass to remove it the first time. Took too long the second time so I used a hair dryer.
Click to expand...
Click to collapse
So which digitizer did you end up buying and which guide or video did you follow? I am about to tear mine apart and could use the info.
senser1080 said:
A VERY confusing part is getting the midframe to hold to the hinge mounts. The side (black dots all down it) should overlap the stabilizer bar on the hinge. I fidgeted with it for hours until realizing it goes over, and inadvertently damaged the highly sensitive LCD screen, which resulted in me taking the whole thing apart again to replace the LCD and digitizer. UGH!
DO NOT get the cheapo digitizer on Amazon, look for one with gray spots where the menu, home, back and search keys are on the back side. The digitizers without them will not work when you swap over the white button caps on the back. I feel like this information is vital to anyone who is replacing their G2 digitizer, but most guides and videos make no mention of it.
I used a lamp to heat up the glass to remove it the first time. Took too long the second time so I used a hair dryer.
Click to expand...
Click to collapse
Hi, I did buy mine from amazon.co.uk, there were a few for sale,, the one I bought was supposed to be a genuine t-mobile g2 replacement (refurb I think, pressumably this just means that it was from a second hand g2 that had problems and the digi was taken out - and I'm pretty certain this is the case as mine has a thin film (which u leave on) over the back of the digi covering the tracks etc, which had a few very small air/dust bubbles under it (just noticeable when screen off), where I own a desire z, so now it sais t-mobile instead of htc, but I can live with that.
The small grey bits that you talk about were floating about or stuck on my digi when I pulled it off the main chassis. I had a look, and as far as I could work out, were possibly just for giving colour to the tiny led's that give you light to the home/search keys etc (I may be wrong on their use), but if you look closely, the tiny grey things have even smaller rectangles on them that relate to the positions of the led's on the circuit board. So I picked the remaining ones off the old digi, put them back in their correct holes and stuck the new digi in. I've had no problems (with a digi from amazon with no little grey things on it) so far, but maybee this is due to mine being a second hand original part..
Edit : Now after reading your post again, you're talking about bits that are actually on the digi itself, not the white caps that I'm talking about! Whoops. I didn't notice any grey spots on the digi itself, but I guess I must have them..
Sent from my HTC Vision using XDA App
ian577416 said:
I replaced the touch screen as well and the problem persists. Plus I never ran into a part that required a heat gun did I use the wrong item?
Click to expand...
Click to collapse
I rekon u replaced the wrong thing! Maybe the lcd?
Sent from my HTC Vision using XDA App
i just replaced mine with this one:
http://www.ebay.de/itm/230685692541?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1439.l2649
actually it says HTC on it and looks a lil bit differently than on the picture.
never the less, i replaced it really carefully and checked every connecting.
But somehow the Touchscreen doesn't work at all.
Can anyone help me ? what could be the problem ?
Wrong digitzer ?
is it okay, that the digitizer has direct contact to the frame where it is glued to ?
jmpcrx said:
... as will be replaceing mine v soon due to 'invisible finger problem' that's driving me nuts..
Sent from my HTC Vision using XDA App
Click to expand...
Click to collapse
Hi!
I have the same problem, I have asked it already here
So you had invisible finger press in the screen, and the screen was bad responsive?
...Just to make sure my problem is digitizer problem! The service wont change it in warranty unless the problem is there all the time! But its driving me crazy! why is it happening randomly, why isnt it all the time? How could i make the screen to do this problem when i'm at the service?

Glitchy Digitizer simple fix

Having used my atrix for over a year now and the more scratches i get on my screen the more unresponsive the screen becomes.. couple that with oily/dirty hands and the screen response just go crazy all the time.
Everytime that happens I notice i get better response after wiping the screen clean and toggling the sleep switch.
Then i tried installing one of those matte screen protector around $2.- on wher i am, problem solved, no more glitchy touch screen response
Sent from my MB860
Wish it was that simple. The plain fact of the matter is.. Motorola screwed up and put in a low grade digitizer (2 point multi touch) with bad manufacturing process meaning that most Atrix out there will have problems with connections between the mainboard and digitizer causing glitches, problems with sensing and the capacitance buttons not working.
The atrix digitizer is great coupled with the fact custom roms here make the phone support 5 touch.
Atrix digitizer can go up to 8 but gets buggy.
I had touch issues only after having a broken digitizer (dropped it) for 3months.
And yea I noticed for awhile now turning off screen resets touch.
Your screen protectors adhesive probably sealed the scratches temporarily which has been linked to the issue that and stops your greasy fingers tampering with it.
Sent from Moto Atrix 4g on Neutrino 2.91
Actually, a tech, told me that the Atrix has a factory problem, and its not a bad production of the digitizer, its a fault with the Motherboard, causing it to damage the digitizer. Thats why it gets fixed when you put your phone to sleep, because its the board's fault, not digitizer's. Sooner or later, the board will cause a dead stripe on the digitizer, with no fix available except for replace the digitizer, and then if you do, after a couple of months, it will damage the new digitizer. At my local repair shop, they won't carry that digitizer anymore because when they used to, customers that fixed their Atrix would come back with a dead stripe and say that they sold a bad/low quality product, but the truth is that its not the digitizer fault.
So you are telling us that when the first digitizer issue appear we should seriously think about replacing the whole phone instead repairing it? (Obviously if warranty is void)
Yes, make sure to carry the insurance on atrix first gen models. They are all faulty. I had the problem with the digitizer/mobo that developed into the lines where nothing would be touch sensitive on the line. Our was like a break in the middle of the screen and a multi touch test app showed the phone thought two fingers were being used if you tried to Swype on the line or if you Swyped across the line it would drop you touch like you lifted your finger at the line. This made the phone touch screen useless and the insurance sent me atrix 2 as a replacement.
Sent from my MB865 using xda app-developers app
djluis48 said:
Actually, a tech, told me that the Atrix has a factory problem, and its not a bad production of the digitizer, its a fault with the Motherboard, causing it to damage the digitizer. Thats why it gets fixed when you put your phone to sleep, because its the board's fault, not digitizer's. Sooner or later, the board will cause a dead stripe on the digitizer, with no fix available except for replace the digitizer, and then if you do, after a couple of months, it will damage the new digitizer. At my local repair shop, they won't carry that digitizer anymore because when they used to, customers that fixed their Atrix would come back with a dead stripe and say that they sold a bad/low quality product, but the truth is that its not the digitizer fault.
Click to expand...
Click to collapse
bchliu said:
Wish it was that simple. The plain fact of the matter is.. Motorola screwed up and put in a low grade digitizer (2 point multi touch) with bad manufacturing process meaning that most Atrix out there will have problems with connections between the mainboard and digitizer causing glitches, problems with sensing and the capacitance buttons not working.
Click to expand...
Click to collapse
Both are correct.
Non reinforced mini flex ribbon on a flimsy connection mounted on another connection. Many points of failure. However a fresh oem digitizer, good repair, dab of silicone, and not dropping your phone can fix most of the issues before they happen.
Sent from my SGH-I317 using Tapatalk 2
I've replaced my digitizer since I bought it broken. I don't seem to have the same issues so I agree with the last comment.
I have two motorola atrix and both have fantastic touch.. One I used with broken digitizer for over a year without any issues whatsoever. Recently replaced the digitizer on the broken one, and still going strong.

Replacing just the glass

I shattered my screen a few weeks ago and had great results replacing just the glass, not the digitizer, however I have a small problem. I didn't realize the adhesive was still on the LCD, I kind of ruined it along the left side of my phone, it doesn't stick properly, kind of looks like a bad screen protector. I have to keep pushing it down to get rid of the haze. What I'm wondering is, can I remove the adhesive all together and just replace the sticker bit along the border of the glass, so there's no adhesive between the glass and LCD without it affecting the performance of the touch screen? It works great as is, the haze is just annoying me.
Any help would be greatly appreciated, I'd hate to do it and lose the ability to use my phone
Sent from my Samsung Galaxy Note II using Xparent Purple Tapatalk 2
May i ask how you replaced the glass, and where you bought it? Shattered mine couple of days ago...
Ghetto_Cowgirl said:
I shattered my screen a few weeks ago and had great results replacing just the glass, not the digitizer, however I have a small problem. I didn't realize the adhesive was still on the LCD, I kind of ruined it along the left side of my phone, it doesn't stick properly, kind of looks like a bad screen protector. I have to keep pushing it down to get rid of the haze. What I'm wondering is, can I remove the adhesive all together and just replace the sticker bit along the border of the glass, so there's no adhesive between the glass and LCD without it affecting the performance of the touch screen? It works great as is, the haze is just annoying me.
Any help would be greatly appreciated, I'd hate to do it and lose the ability to use my phone
Sent from my Samsung Galaxy Note II using Xparent Purple Tapatalk 2
Click to expand...
Click to collapse
My English is not my native language, but considering the word adhesive, you must referring to the double side tape part that holds the digitizer and the glass together.
Assuming that, from my own experience it is a no-go. If you are experiencing sticking parts (ie. it's not properly glued) I am afraid you might have to replace the whole adhesive.
I had the same issue on my Desire HD and about 1 month after replacement, same as you kept pushing it to take the haze away, the inevitable happened. A tiny opening not being able to see with the naked eye, left enough room for dust to enter under the glass. One month later, there was so much dust in it that I had to buy a new full screen.
However, months later, I tried some old trick for future experiments You can eventually take a paint dryer, and try to heat up the lose part then applying some light pressure onit. This process should make the glue on the adhesive very soft and with a bit of luck it might stick on the glass.
I'd say perhaps 60-70 degrees. Don't worry, even 100 degrees won't break your screen unless u're heating it up for more than 10 minutes or so
GL
Fantastic, I'll give heat a try to get it to stick. Unfortunately I can't find the double sided tape anywhere otherwise I'd replace it. I'm in Australia so shipping is pretty expensive from most places outside of the country. I really appreciate the reply
I bought the glass alone off eBay, I believe it was around $30. To replace it took a lot of patience, a hairdryer on low for 15 mins to heat the glue up, finding a spot to slowly pry the glass away from the LCD. As I said, a lot of patience and a lot of mess since my screen was badly cracked and kept breaking off. Was worth it to save $300 though. Figured I could do it for $30 myself and if it broke I'd have had to of paid for both either way
Sent from my Samsung Galaxy Note II using Xparent Purple Tapatalk 2
It seems you already build enough experience with heating up the device. I hope it does the trick for you. On the other hand the adhesive itself shouldn't be much of a problem. They are not made by Samsung itself and if it's not working and still refuse to buy a new glass, I'd just go to a repair shop as I did here in the Netherlands and ask the repair guy to order it. It shouldn't cost more than a few bucks. On top of that just google "note 2 screen adhesive" and look at some amazon/ebay hits, just take that picture/info to the repair guy as a reference to know what to order
matzone said:
It seems you already build enough experience with heating up the device. I hope it does the trick for you. On the other hand the adhesive itself shouldn't be much of a problem. They are not made by Samsung itself and if it's not working and still refuse to buy a new glass, I'd just go to a repair shop as I did here in the Netherlands and ask the repair guy to order it. It shouldn't cost more than a few bucks. On top of that just google "note 2 screen adhesive" and look at some amazon/ebay hits, just take that picture/info to the repair guy as a reference to know what to order
Click to expand...
Click to collapse
Im from the netherlands too, which shops do you recommend? I bought my phone at coolblue, but I dont want to lose my phone for 2 weeks with repair..
Sent from my GT-N7100 using xda app-developers app
Ghetto_Cowgirl said:
I shattered my screen a few weeks ago and had great results replacing just the glass, not the digitizer, however I have a small problem. I didn't realize the adhesive was still on the LCD, I kind of ruined it along the left side of my phone, it doesn't stick properly, kind of looks like a bad screen protector. I have to keep pushing it down to get rid of the haze. What I'm wondering is, can I remove the adhesive all together and just replace the sticker bit along the border of the glass, so there's no adhesive between the glass and LCD without it affecting the performance of the touch screen? It works great as is, the haze is just annoying me.
Any help would be greatly appreciated, I'd hate to do it and lose the ability to use my phone
Sent from my Samsung Galaxy Note II using Xparent Purple Tapatalk 2
Click to expand...
Click to collapse
Check out the link in my signature. You'll find what you're looking for with regards to the adhesive.
Sent from my GT-N7100 using xda premium

[Q] Shattered glass

So, I shattered the glass on my Galaxy S3 today. It's pretty messed up (see the attached picture), but the touch works, even in the damaged areas. So it seems it's only the glass that needs to be replaced, with something like this:
http://www.ebay.co.uk/itm/Blue-Fron...K_Replacement_Parts_Tools&hash=item417515ee67
Correct?
Yep, goodluck. Replaced the same on my Galaxy Note 2. all good now.
Yeah.... if i were you and have the funds, I would replace the complete assembly ($100-$150 on ebay) and be happy.
I shattered the screen on mine and replaced the digitizer alone and now the screen has freezing/unresponsive issues. I should of known better and replaced the complete assembly, I got what i payed for, literally less than that actually. Now i have a semi-new gs3 collecting dust until i save up for a complete lcd.
1slow4G said:
Yeah.... if i were you and have the funds, I would replace the complete assembly ($100-$150 on ebay) and be happy.
I shattered the screen on mine and replaced the digitizer alone and now the screen has freezing/unresponsive issues. I should of known better and replaced the complete assembly, I got what i payed for, literally less than that actually. Now i have a semi-new gs3 collecting dust until i save up for a complete lcd.
Click to expand...
Click to collapse
The screen seems to work fine, touch/responsiveness is working fine in the areas. I have no intention of spending the £100-120 on a complete new screen (again...). I'd rather save that for a Nexus 5.
I'll post again when I receive the part and it's been replaced.
MadsBen said:
The screen seems to work fine, touch/responsiveness is working fine in the areas. I have no intention of spending the £100-120 on a complete new screen (again...). I'd rather save that for a Nexus 5.
I'll post again when I receive the part and it's been replaced.
Click to expand...
Click to collapse
Mine was working fine with cracked digitizer as well. The problems started with new digitizer. Seems that when typing hard enough the digitizer touches LCD and causes to freeze up. Anyways, Good luck.
Sent from my neXus⁴ using Tapatalk 2
Actually the glass on an s3 is just that, glass. The digitizer is fused together with the LCD. However glass is glued to the LCD which can make it very difficult to replace. If you've never taken on the repair of a screen before then I would say you'll be more likely to break the LCD than not in your replacement of the glass. But again it is possible if you are very slow and very careful. As someone else mentioned though it's much easier to replace the whole assembly.
It didn't went well. I wasn't too carefull. In the bottom, the glass was too shattered, so when I tried to lift it, a piece with glue got stock and lifted the digitizer. So now that don't work. I'm not gonna spend £100-120 on a new digitizer, I'm gonna settle for my good old Nokia 6300i (and Nexus 7...) and wait for the Nexus 5.
I would wait for the n5.. gs3 is a dying trend already.
Its hard like everyone said , if your really gunna do it watch videos online and be prepared. If you know anyone that has done it successfully ask for help or tips
ouch didnt see u tried it already
the same happened to me on my wife's white sgs3 trying to be the savior of the day turned out to be an expensive digitizer replacement of $200 instead of the $8 glass replacement. I rushed the glass removal and cracked the lcd screen. I could have ordered one on ebay for $100 but wife needs the phone the next day so i decided to get it repaired locally.
Just replace the glass. A lot of care for changing it, but it is not so hard to do. I did it 2 weeks ago, and all is all right.
My 2 cents
bidibull14 said:
Just replace the glass. A lot of care for changing it, but it is not so hard to do. I did it 2 weeks ago, and all is all right.
Click to expand...
Click to collapse
Wanted to warn that changing the glass is not for everyone. It takes patience and zen. If you rush it, you will likely break LCD and spend even more $$$ that you would have otherwise. Also following notes:
1. Watch at least a couple of youtube videos before starting.
2. Heavy duty heat blower works much better than a hair dryer. Of course, don't go crazy, as it's possible to melt the phone with it
3. S III has a wire at the bottom (the one which goes to the buttons). If you damage it, you will need to replace whole LCD, there is [almost] no chance you will be able to fix this wire. So, always start removing glass starting with the top of the phone
4. Heavily cracked glass is hard to remove, as it crumbles. To make it easier, a) put a scotch tape on top of glass, so that the small pieces stick to it, and b) use a lot of heat
5. Everybody advises to use plastic tools, personally I used swiss army knife with high level of success, and never had a problem scratching LCD. Your mileage may vary, but using metal blade certainly makes life much easier, especially in heavily cracked glass situation.
6. If you do use blade, it often is enough to get blade just a little bit under a glass, and then simply apply heat. Big chunks will unglue all by themselves.
7. Remember, that failure is always an option. Don't use it on the phone, if you know that you desperately need it working right this day, if you don't have a plan B.
1slow4G said:
Mine was working fine with cracked digitizer as well. The problems started with new digitizer. Seems that when typing hard enough the digitizer touches LCD and causes to freeze up. Anyways, Good luck.
Sent from my neXus⁴ using Tapatalk 2
Click to expand...
Click to collapse
same freezing issue on mine... apparently the hardness of Gorilla2 is much greater than the knockoff glass replacements. The replacement glass on ebay and kijiji may not be authentic and that is why it bends slightly when pressed harder (in fact mine cracked completely when I applied too much pressure)
i replaced my glass too (about month ago), and discovered that , the "freezing issue" come's when you press too hard.. that the glass touches lcd.
after quick google-ing , i've found that they suggest to apply uv glue (octa glue) , to fix that.
have somebody tried that ? is it worth that much effort to mess with liquid glue ?
hani93 said:
i replaced my glass too (about month ago), and discovered that , the "freezing issue" come's when you press too hard.. that the glass touches lcd.
after quick google-ing , i've found that they suggest to apply uv glue (octa glue) , to fix that.
have somebody tried that ? is it worth that much effort to mess with liquid glue ?
Click to expand...
Click to collapse
I've heard about that glue too. I'm considering switching mine, because when I repaired I reused the glue of the original glass, and know I had dust between the glass and the lcd -.-
My concern is about the uv light, don't know if we could put in the sun to substitute it.
I was researching how to replace the glass on an iPhone not too long ago and watched a video where the guy used the UV bonding agent. Long story short he said you can use sunlight to cure it but it takes substantially longer than using a UV lamp. I don't know exact time for sunlight but apparently it would work.
Also it appeared to be a long delicate process of removing the current glue from the digitizer and LCD without damaging it. But I'm sure anyone who has already replaced the glass knows how tedious the process is.
m1batt1 said:
I was researching how to replace the glass on an iPhone not too long ago and watched a video where the guy used the UV bonding agent. Long story short he said you can use sunlight to cure it but it takes substantially longer than using a UV lamp. I don't know exact time for sunlight but apparently it would work.
Also it appeared to be a long delicate process of removing the current glue from the digitizer and LCD without damaging it. But I'm sure anyone who has already replaced the glass knows how tedious the process is.
Click to expand...
Click to collapse
it's not that hard to remove factory gle there..
for example, i removed mine, by rolling the glue with fingers.
just make sure, that you don't apply too much pressure to lcd.
and after that, clean up lcd form dust/fingerprints, and you are good to go.
and for removing glass, i used usual/ stronger kitchen knife (attached picture).
i replaced my glass 3 months ago.
i use normal hair dryer to remove glass and glass comes out almost as whole except for small broken pieces.
i think my scratch guard help in that.
i didnt use any additional glue or uv light.
nonresponsive screen is issue but only when you press too hard and press of power button resolve this issue.
but whole process of replacing galss took 2hrs

Categories

Resources