Hey i want to know does cm7 support music playing via aux cable?
yesterday i was trying to play the music via aux cable in my friends car speaker system and it doesnt worked?
there was no problem with car music sytem as my friends galaxy was palying the songs
It doesn't no.
Sent Via LT15i - FXP46-CM7
XperienceD said:
It doesn't no.
Sent Via LT15i - FXP46-CM7
Click to expand...
Click to collapse
what??
And what aux cabel do you using?
3,5mm headphone
USB?
Sent via my FXP046 MT15i®
3.5mm aux cable
http://swarovskisau.com/commonbuys/images/auxcable.jpg
abhisheak.bansal said:
3.5mm aux cable
http://swarovskisau.com/commonbuys/images/auxcable.jpg
Click to expand...
Click to collapse
Why not. Should be play.
AUX is analog and your phone 3,5mm outputs analog sound.
So hardware is capable for that.
Its like you listnenig headphones, only aux is included amplifiler.
And there is no differents cm7 and ordinary roms.
Sent via my FXP046 MT15i®
but it was not able to play songs via aux cable
abhisheak.bansal said:
what??
Click to expand...
Click to collapse
Was a bit quick to post. Might be a power issue.
Sent Via LT15i - FXP46-CM7
abhisheak.bansal said:
but it was not able to play songs via aux cable
Click to expand...
Click to collapse
But headphones playng?
Sent via my FXP046 MT15i®
If your headphones work, but not the aux cable, then there are two options:
1. You audio cable is damaged. Try it with other phone.
2. The car radio of your friend may not be in the correct mode.
Related
I'm using the livedock and connecting the device to the screen with the HDMI cable.
But I got a problem, if the HDMI cable is connected to the phone the audio is connected to the screen also.
So I can't hear anything from the 3.5mm input. Can I somehow disable the HDMI sound and hear from the 3.5mm?
please
yea this used to be my issue as well. maybe a future firmware will enable the sound be selected to out to the 3.5mm jack instead of going with HDMI.
I recently bought a new stereo for my car that has USB,Aux inputs.. i can use the aux but the sound is not as good as the USB. i can use the USB however i will be limited to the stereo controls and it,s pain in the a$$.
can i play music over USB cable so i will have full control of what i wanna play. ?
to make it easy when u mount your sd card on your computer you cant access their content from the phone same think with the stereo
it,s a long shot but you never know there might be a mod that i messed
Long live T989
Hmmm i don't think you can, you're stereo is probably "iPhone ready" where you can use the iPhone physically i think... But with Androids it'll see it as a storage device.
If i were you... Go Bluetooth, i find the clarity better than aux too. That's if you can return the stereo and invest a little more for Bluetooth.
Sent from my SGH-T989 using xda premium
I don't know if you can use a USB cord or not but I know you can use an auxiliary cable. That's what I do
Sent from my SGH-T989 using XDA
You can, it depends on what your system can handle.
At work I plug into Home theaters via USB
Even though their crappy for audio fidelity, samsungs stuff is the most compatible.
But flac wont be found on any HTIB on screen menu I have tested
Sent from my SGH-T989 using xda premium
It may benefit you to know that your phone has preset volumes when you hook up different devices. I'd say try to use the AUX cable if you haven't invested in a Bluetooth device (which is the better option). Just turn the volume up in the media settings and you should be good to go.
Lt.Tealc said:
I recently bought a new stereo for my car that has USB,Aux inputs.. i can use the aux but the sound is not as good as the USB. i can use the USB however i will be limited to the stereo controls and it,s pain in the a$$.
can i play music over USB cable so i will have full control of what i wanna play. ?
to make it easy when u mount your sd card on your computer you cant access their content from the phone same think with the stereo
it,s a long shot but you never know there might be a mod that i messed
Long live T989
Click to expand...
Click to collapse
it works u have to plug the usb into the radio then plug ur phone in and turn usb storage mode then it will connect not the same as the iphone but it works
USB audio works on my Allwinner A10 tablet witn "Unofficial CyanogenMod 9 for many AllWinner A10 tablets" firmware from Christian Troy
I try to connect my phone via my aux port it has with some of my hi-fi or my car system me through the corresponding aux port but to no available. You need some special cable 3,5 mm to make the connection? Mean that all devices that try to connect the phone I'm mode "aux in".
sotsp said:
I try to connect my phone via my aux port it has with some of my hi-fi or my car system me through the corresponding aux port but to no available. You need some special cable 3,5 mm to make the connection? Mean that all devices that try to connect the phone I'm mode "aux in".
Click to expand...
Click to collapse
check the AUX cord.........it may not be working
yea probably cord issue, my grand has had no issues with aux
thanks, now working fine, The problem is aux cable
Does this work with a USB audio DAC such as the FiiO E7?
Tried it and it works!
Works as is or you had to do something first?
How big is the difference in quality of the sound?
Are you stock or rooted?
Thanks!
Works as is on stock. Not rooted. Sound quality depends on the USB audio DAC, the tablet just passes the audio.
Sent from my SM-N9006 using Tapatalk
smsmasters said:
Works as is on stock. Not rooted. Sound quality depends on the USB audio DAC, the tablet just passes the audio.
Sent from my SM-N9006 using Tapatalk
Click to expand...
Click to collapse
Do you just plug your DAC into the USB connection and start listening or did\do you have to do something else first?
Do you have to do anything special to disconnect or do you just pull the USB cable or the DAC?
I have an Audioengine Dragonfly I'd like to try with my stock v500.
Thanks!
I just plugged it in and then started listening. It worked without configuring anything. Just pull the cable to disconnect.
Sent from my SM-N9006 using Tapatalk
smsmasters said:
I just plugged it in and then started listening. It worked without configuring anything. Just pull the cable to disconnect.
Sent from my SM-N9006 using Tapatalk
Click to expand...
Click to collapse
Thanks!
I tried my Audioengine Dragonfly via USB but I can't get it to work. It lights up but no sound comes through. I've played with the USB settings on the G Pad but I haven't found anything that gives me sound. I'm using the same USB OTG cable that lets me read and write to flash drives.
Sorry to hear that. Not sure why. Perhaps the g pad only outputs certain bit depths that are compatible with certain usb dacs.
Sent from my GT-I9195 using Tapatalk
FiiO E10 Just plugged and working...
loosak said:
FiiO E10 Just plugged and working...
Click to expand...
Click to collapse
Thanks for your input.
What kind of cable are you using? USB OTG?
Which audio player are you using?
Are you stock? Upgraded to 4.4.2?
Thanks!
FiiO DAC E10
opti1 said:
Thanks for your input.
What kind of cable are you using? USB OTG?
Which audio player are you using?
Are you stock? Upgraded to 4.4.2?
Click to expand...
Click to collapse
Yes, USB OTG cable, Stock ROM 4.4.2 (KOT49I.V50020b), Player: I think it does not matter, all audio output is redirected to DAC, but Poweramp, Google Play Music and MXPlayer works for me.
loosak said:
Yes, USB OTG cable, Stock ROM 4.4.2 (KOT49I.V50020b), Player: I think it does not matter, all audio output is redirected to DAC, but Poweramp, Google Play Music and MXPlayer works for me.
Click to expand...
Click to collapse
Thanks. I have 4.2.2 stock, USB OTG cable (works with flash drives), PowerAmp Pro, but I can't get audio through my Audioquest Dragonfly. In fact, when I plug in the Dragonfly it locks up the G Pad. I have to restart it to get it to function again.
Did you alter your USB settings on the G Pad?
opti1 said:
Did you alter your USB settings on the G Pad?
Click to expand...
Click to collapse
Yes, I turn on USB debugging in Developer options (for rooting). But I think that it doesn't affect the DAC function. I guess that it depeds on which a USB controller DAC contains (and kernel supports). FiiO and Audioquest using different USB conreller. Fiio E-10 using TE7022L and Audioquest Dragonfly has TAS1020B . You should try conect ot by a powered USB hub..
hi
i recently bought a chord mojo as an amplifier for my headphones. i tested it on the zenfone 2 and i find out that i can only play audio if played through usb audio player pro but i couldn't play any audio through power amp, spotify, mx player pro, youtube, etc. i thought that usb audio is already enabled for lollipop so i was expecting that this available already for all sources. do i need to download additional drivers?
thanks
USB Audio Asus Zenphone
In order to enable usb audio, you have to choose AudioWizard\Smart mode then plugin usb audio in and play.
coi_xay said:
In order to enable usb audio, you have to choose AudioWizard\Smart mode then plugin usb audio in and play.
Click to expand...
Click to collapse
This didn't work unfortunately. My usb dac isn't picking up the sound
For me, it worked by using the afore mentioned setting and by plugging a cable from the headphone jack to my aux jack on my car deck.
Sent from my ASUS_Z00AD using XDA Free mobile app
quicksilver53 said:
For me, it worked by using the afore mentioned setting and by plugging a cable from the headphone jack to my aux jack on my car deck.
Sent from my ASUS_Z00AD using XDA Free mobile app
Click to expand...
Click to collapse
Hello
Unfortunately, chord mojo doesn't have an aux in. It requires purely digital input.
Hello
I flashed android 6.0 and my usb dac is working marvelously now. I guess the stock rom from asus which i think is lollipop version 5.0.1 does not support usb audio.
Any more issues playing Spotify or anything else? I'm thinking of the exact combination of phone and DAC.