Related
I hope starting a new thread is the way to go on this...
I just updated to the new Sprint Official WM 6.1 ROM, and immediately could not connect to the internet.
I tried running the IOTA automatic data provisioning update (Start->Settings->Personal Tab->Phone->Services Tab->Internet->Get Settings->Start) and it failed repeatedly with a 1012 error. As was posted by others, I noticed that there was a "CurrentUserName" setting in Start->Settings->System->Device Information that had [email protected] where I would have expected to see [email protected] instead. (that would have been my Sprint provided email address) The first thing I tried was to go to the phone dialpad and dial ##3282# to start the EPST program and check my data provisioning settings (this requires that you know your MSL - Master Service Lock Code - if you are going to edit). UserName was blank there, so I tapped the blank setting and held down until an "EDIT" menu popped up. I tapped "EDIT" and changed it to the previously correct [email protected] value. After saving changes and another reboot, I still could not connect to the internet, run IOTA, and the "CurrentUserName" was still wrong. After searching through various settings looking for a way to change the currentusername, I installed PHM Registry Editor and searched again.
In HKEY_LOCAL_MACHINE/Software/OEM/DIM there is a key "EnableCurrentUserName" and it was set to 1. I edited that and set it to 0, exited the Registry Editor, and restarted the device by holding the power button until it warned me about shutting down. I tapped "Yes" and it shut down and restarted. The "CurrentUserName" setting no longer appeared in the Device Information page. At this point I was able to run IOTA successfully and imediately after that I could use the internet and other data services.
I hope this helps someone. Sorry to be so long winded, but I was trying to answer as many "How? Where?" questions as I could as I went.
Briefly:
1. Using WM Registry Editor software, change HKLM/Software/OEM/DIM/"EnableCurrentUserName" from 1 to 0 then save changes and exit editor.
2. Dial ##3282# and edit UserName to correct [email protected] address. Device will reboot when you exit and save changes.
3. Run IOTA by going to Start->Settings->Personal Tab->Phone->Services Tab->Internet->Get Settings->Start
Thanks to all the others here who have helped me along the way,
Scruffy
anyone else know if this works?
i just flashed the new sprint rom and now the data connection does not work.. no internet.. ? I was just wondering if anyone else had this problem and does this fix it?
After some more time with this ROM installed I have found that it is not neccessary to change the ##DATA# (##3282#) user name settings. Just change the HKEY_LOCAL_MACHINE/Software/OEM/DIM/EnableCurrentUserName value to zero, save changes and then you can run the IOTA update successfully (or at least I can).
I have found that I need to do this every time I do a hard reset of my device. I hope this helps someone else.
Scruffy
this did not work for me.. I Get error code 67
i started a new thread here........ http://forum.xda-developers.com/showthread.php?t=415666
so maybe someone will chime in... the ##3282# does not work for me at all.. you hit that on the dial pad and nothing happens... so i can not access that menu...
For now i went back to a OEM rom and called sprint and they got me working by doing a MASTER RESET... also ##3282# works on OEM roms but i think the file EPST.EXE is missing from the CUSTOM roms... any input would be great..
Not working for me.
i'm sure a master reset from within #778 or whatever would work but i don't feel like
putting in the data again.
Scruffy said:
I hope starting a new thread is the way to go on this...
I just updated to the new Sprint Official WM 6.1 ROM, and immediately could not connect to the internet.
I tried running the IOTA automatic data provisioning update (Start->Settings->Personal Tab->Phone->Services Tab->Internet->Get Settings->Start) and it failed repeatedly with a 1012 error. As was posted by others, I noticed that there was a "CurrentUserName" setting in Start->Settings->System->Device Information that had [email protected] where I would have expected to see [email protected] instead. (that would have been my Sprint provided email address) The first thing I tried was to go to the phone dialpad and dial ##3282# to start the EPST program and check my data provisioning settings (this requires that you know your MSL - Master Service Lock Code - if you are going to edit). UserName was blank there, so I tapped the blank setting and held down until an "EDIT" menu popped up. I tapped "EDIT" and changed it to the previously correct [email protected] value. After saving changes and another reboot, I still could not connect to the internet, run IOTA, and the "CurrentUserName" was still wrong. After searching through various settings looking for a way to change the currentusername, I installed PHM Registry Editor and searched again.
In HKEY_LOCAL_MACHINE/Software/OEM/DIM there is a key "EnableCurrentUserName" and it was set to 1. I edited that and set it to 0, exited the Registry Editor, and restarted the device by holding the power button until it warned me about shutting down. I tapped "Yes" and it shut down and restarted. The "CurrentUserName" setting no longer appeared in the Device Information page. At this point I was able to run IOTA successfully and imediately after that I could use the internet and other data services.
I hope this helps someone. Sorry to be so long winded, but I was trying to answer as many "How? Where?" questions as I could as I went.
Briefly:
1. Using WM Registry Editor software, change HKLM/Software/OEM/DIM/"EnableCurrentUserName" from 1 to 0 then save changes and exit editor.
2. Dial ##3282# and edit UserName to correct [email protected] address. Device will reboot when you exit and save changes.
3. Run IOTA by going to Start->Settings->Personal Tab->Phone->Services Tab->Internet->Get Settings->Start
Thanks to all the others here who have helped me along the way,
Scruffy
Click to expand...
Click to collapse
how do i find [email protected] where would that be?
Scruffy said:
3. Run IOTA by going to Start->Settings->Personal Tab->Phone->Services Tab->Internet->Get Settings->Start
Click to expand...
Click to collapse
I just upgraded to NFSFAN's latest ROM, everything went well but I can not get my internet to work. The one thing I did notice is under the services tab, internet is not an option. I loaded the dcd sprint carrier 20090714 cab am I missing something else?
Thank you for any help you can provide.
Update:
Well I went back and flashed to the HTC 6.1 rom, then back to the 6.5 rom. That fixed my internet issues, but that option is still missing for me. Then after all of that my MSID was really screwed up. Everything seems to be good now.
please please help me clear the instructions
i have a horribly vague idea of what i need to do, to get the internet working again.
i already got the IOTA_1120 zip file in my cell but when i even try to open it up it says that there is no application that is related to to it, so i must start this application and open up the file from within. How do i do this? am I even doing what im supposed to??
Where exactly is HKEY_LOCAL_MACHINE/Software/OEM/DIM and how do i get there???
if you could please instruct me with simple stieps i would greatly appreciate it, simple being like start>program files> etc.
please help i am one step away from smashing this damm cell into the wall
electricfeel_2012 said:
i have a horribly vague idea of what i need to do, to get the internet working again.
i already got the IOTA_1120 zip file in my cell but when i even try to open it up it says that there is no application that is related to to it, so i must start this application and open up the file from within. How do i do this? am I even doing what im supposed to??
Where exactly is HKEY_LOCAL_MACHINE/Software/OEM/DIM and how do i get there???
if you could please instruct me with simple stieps i would greatly appreciate it, simple being like start>program files> etc.
please help i am one step away from smashing this damm cell into the wall
Click to expand...
Click to collapse
The path of HKEY.... is actually on the registry. You need to use a registry editor (like PHM Regedit) to make the necessary changes to the registry. I would recommend you to re-read those instructions as they will not get any easier than that. Alternatively, if you are on Sprint's official rom and have absolutely no clue what you are doing, you can always call them and ask them for help.
As far as the IOTA zip file, if you cannot open it, that means that you do not have any program to extract from compressed files in your device. Your best bet is to transfer the file to the desktop and extract it there. Once you are done, place the extracted contents back in the device and run it in there.
Let me guess...
You've discovered some hidden menus recently by typing codes in the dialer and find out this one: *#*#4636#*#* that open a "Testing" screen showing options like this:
Phone Information
Battery Information
Usage Statistics
Wi-Fi Information
Then you went to Phone Information
Tried some options (maybe played with SMSC:_________Update / Refresh ) but that was not doing anything so you exited the menu.....
after a while you wanted to send a text or someone was asking you "Did you got my text?" and you didn't....
Here's what hapened: Accidentaly you erased from your phone the "Messaging Center Number" wich is responsible for giving your phone the access to the SMS/MMS central of your provider.....resulting in loosing the ability to send/receive messages.
Don't worry, after having navigated XDA Forums I finally found my way to make it work again (yes that's because I did it that I now now it).
By the way, even if you Factory reset, flash a new rom/radio/kernel that mistake is gonna stay. You need to enter the number again.
in the *#*#4636#*#* hidden menu,
scroll down to "SMSC:"
in the box type: 0791715097960300
press the "Update" / "Mettre à Jour" (first button)
Now exit and Reboot the phone.
To test it, don't try to resend an old test message as it contain old message center number. I even suggest to delete previous text messages from your inbox if possible.
If it worked, everything should be fine by now. (you can even kudo me for this loll)
NOTE:
The real Roger Center number is +17057969300
the thing is that it need to be Encrypted in Hexadecimal PDU format.
(user MarcusVanSciver on XDA shown that link in thread http://forum.xda-developers.com/showthread.php?t=1412261)
That was for Orange Network (european have 8 number to phone number instead of 7 so I had to add a 0 at the end to make it work for Rogers)
after Encryption the number was now: 0791715097960300
This worked for ROGERS, the trick could maybe work for other networks but I can not validate the info. (but for sure this will not be the same number)
This had been tested with stock rom and Custom Rom With Custom Radio and Custom Kernel.
If this helped you, please give credit to this post ;-)
http://forum.xda-developers.com/showthread.php?p=25204768
Easier way to do it without mucking around looking for your SMSC. It's how I got mine up and going again!
Sent from my Galaxy Nexus using XDA
Teranox said:
Let me guess...
You've discovered some hidden menus recently by typing codes in the dialer and find out this one: *#*#4636#*#* that open a "Testing" screen showing options like this:
Phone Information
Battery Information
Usage Statistics
Wi-Fi Information
Then you went to Phone Information
Tried some options (maybe played with SMSC:_________Update / Refresh ) but that was not doing anything so you exited the menu.....
after a while you wanted to send a text or someone was asking you "Did you got my text?" and you didn't....
Here's what hapened: Accidentaly you erased from your phone the "Messaging Center Number" wich is responsible for giving your phone the access to the SMS/MMS central of your provider.....resulting in loosing the ability to send/receive messages.
Don't worry, after having navigated XDA Forums I finally found my way to make it work again (yes that's because I did it that I now now it).
By the way, even if you Factory reset, flash a new rom/radio/kernel that mistake is gonna stay. You need to enter the number again.
in the *#*#4636#*#* hidden menu,
scroll down to "SMSC:"
in the box type: 0791715097960300
press the "Update" / "Mettre à Jour" (first button)
Now exit and Reboot the phone.
To test it, don't try to resend an old test message as it contain old message center number. I even suggest to delete previous text messages from your inbox if possible.
If it worked, everything should be fine by now. (you can even kudo me for this loll)
NOTE:
The real Roger Center number is +17057969300
the thing is that it need to be Encrypted in Hexadecimal PDU format.
(user MarcusVanSciver on XDA shown that link in thread http://forum.xda-developers.com/showthread.php?t=1412261)
That was for Orange Network (european have 8 number to phone number instead of 7 so I had to add a 0 at the end to make it work for Rogers)
after Encryption the number was now: 0791715097960300
This worked for ROGERS, the trick could maybe work for other networks but I can not validate the info. (but for sure this will not be the same number)
This had been tested with stock rom and Custom Rom With Custom Radio and Custom Kernel.
If this helped you, please give credit to this post
Click to expand...
Click to collapse
Thanks dude! It worked for me
Teranox said:
Let me guess...
You've discovered some hidden menus recently by typing codes in the dialer and find out this one: *#*#4636#*#* that open a "Testing" screen showing options like this:
Phone Information
Battery Information
Usage Statistics
Wi-Fi Information
Then you went to Phone Information
Tried some options (maybe played with SMSC:_________Update / Refresh ) but that was not doing anything so you exited the menu.....
after a while you wanted to send a text or someone was asking you "Did you got my text?" and you didn't....
Here's what hapened: Accidentaly you erased from your phone the "Messaging Center Number" wich is responsible for giving your phone the access to the SMS/MMS central of your provider.....resulting in loosing the ability to send/receive messages.
Don't worry, after having navigated XDA Forums I finally found my way to make it work again (yes that's because I did it that I now now it).
By the way, even if you Factory reset, flash a new rom/radio/kernel that mistake is gonna stay. You need to enter the number again.
in the *#*#4636#*#* hidden menu,
scroll down to "SMSC:"
in the box type: 0791715097960300
press the "Update" / "Mettre à Jour" (first button)
Now exit and Reboot the phone.
To test it, don't try to resend an old test message as it contain old message center number. I even suggest to delete previous text messages from your inbox if possible.
If it worked, everything should be fine by now. (you can even kudo me for this loll)
NOTE:
The real Roger Center number is +17057969300
the thing is that it need to be Encrypted in Hexadecimal PDU format.
(user MarcusVanSciver on XDA shown that link in thread http://forum.xda-developers.com/showthread.php?t=1412261)
That was for Orange Network (european have 8 number to phone number instead of 7 so I had to add a 0 at the end to make it work for Rogers)
after Encryption the number was now: 0791715097960300
This worked for ROGERS, the trick could maybe work for other networks but I can not validate the info. (but for sure this will not be the same number)
This had been tested with stock rom and Custom Rom With Custom Radio and Custom Kernel.
If this helped you, please give credit to this post
Click to expand...
Click to collapse
Hey man, this might be a bit old for you but i just got a galaxy nexus. I am having the outgoing text issue. I've tried that number and everytime i hit update it just says update error. Think you mightbe able to help me?
Damn this doesn't work for me
To program the SMSC (Text Messaging) number on Android devices, please follow these steps:
Go to the phone application.
From the phone application, press *#*#4636#*#*. (You will have to press the Call or Send button after entering this code in for some Android devices).
Tap on Phone Information
Scroll to the bottom to where it says SMSC and enter this number exactly as you see on this page (including all symbols): +17057969300
Press Update.
k guys, this thread is coming about after respectfully moving the discussion from kalaker's s-off thread.
i've been looking for a while about how to back up my nv keys for data, just in case anything happens to my one v. this is thanks to New Optimus (for steps 8-10) and jmztaylor, who informed me the open sesame door trick works. I AM NOT RESPONSIBLE FOR HOW SOME MAY USE THIS. open sesame door trick has the potential to screw your phone up if you dont do it right, or delete an nv item.
CDMA ONLY (i dont think gsm works the same way anyway)
YOU ARE NOT MODIFYING ANYTHING. All you are doing is backing up your AAA and HA keys. they are used to identify and register your device's data on the VM network. IF YOU MODIFY ANYTHING, ITS YOUR FAULT IF YOU SCREW IT UP.
step 1:
download and install qpst. im not linking to the file, you should be able to find it easily enough by googling it.
step 2:
open up qpst configuration, and let it sit in the background for a minute. install the htc diag drivers for one v from here: http://www.htc.com/www/support/
look for the one v, and download and install the HTC Sync program which will install all the drivers you need.
step 3:
close out of htc sync once its installed, its an annoying program anyway. connect your phone, make sure adb debugging is enabled in developer options in settings. open the dialer, type in ##3424# (##diag#) and a screen will come up that says on and off, with select at the bottom. click on, then select, and it will ask you for your msl code.
note: your msl code can be obtained by a app in market called MSL Reader, you need root for this. follow the prompts in the app, its easy enough to do.
step 4:
after entering your msl code and entering diag mode, go back into qpst configuration. click on "add new port" toward the bottom right, and make sure when the window opens "COMx- USB/QC Diagnostic" is selected and click ok. qpst configuration should now recognize your phone as SURF-MSM7830. if it doesnt, update your version of qpst.
step 5:
in qpst configuration, click on "Start Clients- EFS Explorer". make sure you put your msl in the box that says spc, and click ok. a please wait window will pop up, it will only take a few seconds.
from New Optimus's post: http://forum.xda-developers.com/showpost.php?p=29951978&postcount=796
8. Once the phone reads completely make a new directory named (open sesame door) without the parentheses and all lower case
9. After making the new folder locate abd.exe from the android sdk install folder and press: start, run and type cmd then press enter you will get a command prompt window that opens up navigate to the android sdk directory and type; adb reboot, the phone should then reboot if you’ve done as you were supposed to.
10. After the phone reboots read it again with QPST EFS Explorer which still should be opened, you will notice that the red no access circle has been removed from the nvm directory so expand it and go to the num directory,
Click to expand...
Click to collapse
(note: edited New Optimus's post to remove links to esn/meid changing which is frowned upon in the forums, also i already had the open sesame door folder created upon making the pictures.)
left click and drag 465, 466, 1192 and 1194 to your desktop.
keep 465,466, 1192 and 1194 in a safe spot, they are how you have data on your phone. if something happens to your HOV and those are gone, good luck getting data back.
Quick noob question, do these files get generated by the carrier when you activate the phone?
whoshotjr2006
Do AKEY, SSDA and SSDB files need to be saved? if so, where are the files?
reachforthesky said:
whoshotjr2006
I know the content of file 0 and 1943. Could you briefly describe the contents of these 4 files (465, 466, 1192 and 1194)? Which one is HA, AAA, SSDA and SSDB? Are there any more important NVM files need to be saved?
Click to expand...
Click to collapse
465^"Data Services Mobile IP General User Profile"^"Data*"
466^"Data Services Mobile IP Shared Secret User Profile"^"Data*"
1192 is the AAA secret
1194^"HDR Access Network Stream CHAP Authentication User ID"^"Data*"
The reference is here: http://forum.xda-developers.com/showthread.php?t=1954029
Got sooo excited when I saw this. Used to switch firmware's on my optimus v with the firmware of the optimus s, and use optimus s roms. Had all of my nv data and everything else backed up. Forgot you have to have be on an aosp rom for this to work because you need a port. -_- I don't have a stock backup and right now I'm tethering, so it'd take awhile to download a stock backup. Guess I'll have to wait a week or so.
nvm, I found a backup. I tried it out, and i got to the qpst efs explorer. I did the open sesame door, and it unlocked the nvs, but I only had a couple of the files from the list. I did not have 465 or 466. Also, I had an issue when I tried to recognize the phone. It did recognize the phone in diag mode with the port, but not as surfmsm7830. I have the most updated version of qpst.
I'll have to check what version I'm running of qpst, I know its close to the newest if not the newest. It wouldn't recognize my phone correctly until I had a new enough copy.
Also the first time I tried the open sesame door trick, I too had the limited nv items. I used the ruu to go back to stock, and once I did that the open sesame folder dir survived the ruu and unlocked the rest of the nv items.
Hope that helps.
Sent from my One V using xda app-developers app
What version of QPST are you using for this? I get an error "Online connection failure: Unspecified error" when trying to connect.
I think my phone isn't getting read properly by QPST because under phone it says "(unknown)" even though the other fields fill in correctly.
CDMA Workshop reads my phone no problem, but this thing no luck.
EDIT: Found an updated build and it displays the specified info under phone. Not sure what the lowest working version is, but v2.7 build 323 will not read it, build 366 will though.
Hi,
I am trying to get multi user feature to work on my HTC 10 because this is not enabled on the version I have (pre-ordered, UK, no carrier).
I rooted the device following this post. Everything went ok.
Using BuildProp Editor I added on my build.prop the following lines:
Code:
fw.max_users=3
fw.show_multiuserui=1
After rebooting I see the option Users on Settings. I go ahead and add new user, it prompts "set up user now?". If I say yes, it switches to a new lock screen. However, when I try to unlock the screen, it says "Unfortunatly, Setup has stopped." with an OK button that when pressed just gives me the same message. No other function is available other then give OK, volume keys and power button. To get out of the message loop I need to reboot phone. After reboot, I see the new user that I tried to create on the list of user but If I try to enter I get the same Setup error.
Has anyone tried this?
I know that similar thing can be done via a Xposed module. But I would like to have this sorted without having to go there for now.
Running rooted 'stock' Android 6.0.1 (1.30.401.1) on HTC 10.
Cheers
--------------------
SOLUTION:
1 ) I edited the build.prop and removed the lines I added to get back to original.
2) I installed Xposed and a module XposedMultiUsersModule. This gave-me again the the Users option on the Settings. But trying to add new user gives the same error on Setup as before.
3) I edited the build.prop. Change the line ro.setupwizard.mode=OPTIONAL to ro.setupwizard.mode=DISABLED.
Then you can add new user and everything will be ok. You just need to add your google account and setting a few things up manually as necessary for your use. I do believe that I could have done the step 3 without steps 1 and 2. But I just don't want to test that now.
So far, no issues with internet connectivity. I'm happy.
Hope it helps!
UPDATE: If one tries Guest instead of creating a New User, you can use it. It even allows you to keep yours application settings and data after reboot. However, I am having lots of problems regarding losing internet connectivity on the the Guest account when I switch back to Owner profile. That is a problem because I would like to have app running on the Guest account that need to be online.
If there was a way to clone another account or bypass the android Setup application I think I could manage to get what I want.
SOLUTION:
1 ) I edited the build.prop and removed the lines I added to get back to original.
2) I installed Xposed and a module XposedMultiUsersModule. This gave-me again the the Users option on the Settings. But trying to add new user gives the same error on Setup as before.
3) I edited the build.prop. Change the line ro.setupwizard.mode=OPTIONAL to ro.setupwizard.mode=DISABLED.
Then you can add new user and everything will be ok. You just need to add your google account and setting a few things up manually as necessary for your use. I do believe that I could have done the step 3 without steps 1 and 2. But I just don't want to test that now.
So far, no issues with internet connectivity. I'm happy.
Hope it helps!
Hi,
thanks for the updates. do you think it would work by just editing the build.prop file with the line modifications ?
add :
fw.max_users=3
fw.show_multiuserui=1
change :
ro.setupwizard.mode=OPTIONAL
to
ro.setupwizard.mode=DISABLED
Thanks !
nuts77 said:
Hi,
thanks for the updates. do you think it would work by just editing the build.prop file with the line modifications ?
add :
fw.max_users=3
fw.show_multiuserui=1
change :
ro.setupwizard.mode=OPTIONAL
to
ro.setupwizard.mode=DISABLED
Thanks !
Click to expand...
Click to collapse
It Works ...
i am able to create a new user with changing the above mentioned settings, but dont know how to change between the two users not even able to change to guest and back to original account, i can however see the guest account in the user list please guys help me i am stuck with my new user account which i setup after making these changes unable to go back or switch back to original account
I'm trying to find information about a multimedia system i have installed in my Skoda, the sticker on the device says CNT100, which is manufactured by CarNeTek (device page - https://www.carnetek.com.tw/products_detail/15.htm, not sure if they are the manufactures or just a reseller).
The company which sell and install it locally are not willing to share any information about the device, and of course are not willing to unlock it (to install applications from the play store, tweak configuration, etc.).
On the device there are 6 dip switches (which i couldn't figure out what they control), and no visible button (to get into recovery), i can get to the play store, and install applications - but as soon the installation is completed - they get uninstalled (there is a list of application that are not automatically uninstalled).
The launcher looks like a custom local version, there is no way to get into the settings page and the notification bar cannot be clicked (or dragged down), if i click multiple times on the menu - i get a dialog for some configuration, where i'm prompt for password (the dialog has a random number on it - which i suspect is used to generate correct password).
is anyone familiar with this device? or can suggest a way to unlock it?
(attached images of the device and the boot screen)
Hey mrtowel!
Trying to figure out that as well.
You said "if i click multiple times on the menu"
Where is this menu? possible to send a photo of that?
I'm talking about an Israeli version
Seems to be customized by [email protected]
sorry but i was wrong describing the way to get to the password dialog, on the home screen - there is a weather widget, showing the weather on the left side and the clock on the right side, multiple taps on the weather allows you to reboot the device, while multiple taps on the clock gets you to the password dialog.
I made some progress with the device - still working on getting it unlocked completely, let me know if you want more details.
mrtowel said:
Seems to be customized by [email protected]
sorry but i was wrong describing the way to get to the password dialog, on the home screen - there is a weather widget, showing the weather on the left side and the clock on the right side, multiple taps on the weather allows you to reboot the device, while multiple taps on the clock gets you to the password dialog.
I made some progress with the device - still working on getting it unlocked completely, let me know if you want more details.
Click to expand...
Click to collapse
Hey!
Just found that new to me. Pushed 6 times on the clock of the weather widget and got a prompt for the password. I receive a 9 digit number with that.
Also found that if you do the same on the temperature indication, you'll be prompt for device restart.
So that's a progress.
Anyways, I will be happy to hear from you, what progress you have made on this.
Will send you a PM.
Did someone have any success?
Hello, i have a Toyota corolla 2016 with "android multimedia" that have only 2 apps without google play or any apps, the startup screen is like yours.
i wan to unlock the system, someone know how to do that?
gtrs36 said:
Hello, i have a Toyota corolla 2016 with "android multimedia" that have only 2 apps without google play or any apps, the startup screen is like yours.
i wan to unlock the system, someone know how to do that?
Click to expand...
Click to collapse
try to get to app store (in case it is installed) through one of the installed apps using the 'rate us' option, you can also try and push a play store link through bluetooth, if it works - the android system will launch the play store app, and you'll be able to setup your account.
Once you get to the play store - download and install Googel app (https://play.google.com/store/apps/details?id=com.google.android.googlequicksearchbox&hl=en) this will let you ask google assistant to 'Open Display Settings' (in my case this option let me enable the drag down menu, where i could easily access the settings and other stuff).
hope that helps
?
Hey did you succeed?
please help
Hi
did any one of you had any success with getting into setting menu ?
i can get to google play...but as was posted before, everything i try to install immediately erase itself.....
does any one have the approved app list from ituran ?
i do believe that together we can crack this....
thanks
Thanks for the tips I've made it to download youtube! But how I can bypass the limit to install all apps from play store?
Also how can I cancel the restrictions of using apps during drive?
Thanks
Allon
Hey @mrtowel any change you can share some more details?
I tried connecting to the USB with my laptop to try doing some adb commands but it did not detect anything
I'm also wondering about the dip switch
and how to get the password bypass
Would really like to hear some more details if you can share please?
Just came here to see if can recall my steps from last time i played with the device (i kind of gave up, as it worked well with what there is, but recent update made it work really slow).
turns out there is a post on facebook (https://facebook.com/groups/gilcar/permalink/729881061134680/?comment_id=729883497801103), i'm going to try and build some utility to generate unlock codes (last time, i managed to get to an adb terminal, but i wasn't aware of the `pm hide` option to disable the installation blocker ****).
will post updates here if i get some progress
For anyone interested, attached the list of whitelisted apps. a jar to generate the code to enable tech mode and how i disabled the installation blocker
For the jar - you would need to get your device Wifi MAC address (see old post from 2019 on how to enable the navigation bar), which can be retrieved from the 'אודות' section. (run the jar by running 'java -jar codeGen_jar.jar 00:11:22:33:44:55' - replace the numbers with your device mac address)
Wifi must be enabled - before the next step
To get to the code, hit few clicks on the clock widget in the home screen would prompt you with a password (if the code generator matches your version of connect-it (if it isn't - see bypass admin mode workaround below), the codes would match), enter the unlock code (admin mode result from the codeGen output) and move to the apps section - you would see 'tech mode' application.
Wifi must be connected before the next step
On the tech mode application - you would have another code (tech mode result from the codeGen) enter it - and it would open a page to enable adb remote server (you must be connected to a wifi network to get it to work).
Connect to the adb using a remote shell from another device (or a laptop), to the specified IP on port 1917 (note that most mobile tethering options won't work due to networking limitations). If you don't have an accessible wifi network - see Wifi Workaround below
From adb, run the following:
to disable the application which blocks installations: pm hide com.ituran.installationblocker
Disable updates: pm hide com.ituran.systemupdateservice
Disable blocking applications while driving: pm hide com.ituran.driveusagemonitor
Tips:
While in admin mode, you can see all installed applications, and pin them to the start page of the home screen, recommend to pin Play Store app (as it is usually hidden)
Don't try to enable or enter 'Guest mode' (i tried it, and the device went into boot loop)
The codes generated are date sensitive, so either generate new ones if you won't use them in the same day, or change the device date.
Wifi Workaround : a workaround can be to install modified version of 'Remote ADB Shell' (attached) on the device, save it to your mobile phone, and push it to the device through bluetooth, this version is the same version as 'Remote ADB Shell' from the play store - only names 'Spotify' which will keep it installed on the device, after installation, run it and connect to 127.0.0.1 on port 1917 instead.
Bypass admin mode workaround : while Admin Mode enables you to view the hidden applications, in the above process, it mainly gives you the option to run the tech mode app. if the code for the admin mode isn't working for you, install 'Amaze file explorer' (attached - it was renamed to bypass the installation blocker) by pushing it through bluetooth.
You can find more details on this facebook post (not mine - but i used details from this thread to figure out how to disable the application from ADB)
Enjoy and drive safely.
mrtowel said:
For anyone interested, attached the list of whitelisted apps. a jar to generate the code to enable tech mode and how i disabled the installation blocker
For the jar - you would need to get your device Wifi MAC address (see old post from 2019 on how to enable the navigation bar), which can be retrieved from the 'אודות' section. (run the jar by running 'java -jar codeGen_jar.jar 00:11:22:33:44:55' - replace the numbers with your device mac address)
Wifi must be enabled - before the next step
To get to the code, hit few clicks on the clock widget in the home screen would prompt you with a password (if the code generator matches your version of connect-it (if it isn't - see bypass admin mode workaround below), the codes would match), enter the unlock code (admin mode result from the codeGen output) and move to the apps section - you would see 'tech mode' application.
Wifi must be connected before the next step
On the tech mode application - you would have another code (tech mode result from the codeGen) enter it - and it would open a page to enable adb remote server (you must be connected to a wifi network to get it to work).
Connect to the adb using a remote shell from another device (or a laptop), to the specified IP on port 1917 (note that most mobile tethering options won't work due to networking limitations). If you don't have an accessible wifi network - see Wifi Workaround below
From adb, run the following:
to disable the application which blocks installations: pm hide com.ituran.installationblocker
Disable updates: pm hide com.ituran.systemupdateservice
Disable blocking applications while driving: pm hide com.ituran.driveusagemonitor
Tips:
While in admin mode, you can see all installed applications, and pin them to the start page of the home screen, recommend to pin Play Store app (as it is usually hidden)
Don't try to enable or enter 'Guest mode' (i tried it, and the device went into boot loop)
The codes generated are date sensitive, so either generate new ones if you won't use them in the same day, or change the device date.
Wifi Workaround : a workaround can be to install modified version of 'Remote ADB Shell' (attached) on the device, save it to your mobile phone, and push it to the device through bluetooth, this version is the same version as 'Remote ADB Shell' from the play store - only names 'Spotify' which will keep it installed on the device, after installation, run it and connect to 127.0.0.1 on port 1917 instead.
Bypass admin mode workaround : while Admin Mode enables you to view the hidden applications, in the above process, it mainly gives you the option to run the tech mode app. if the code for the admin mode isn't working for you, install 'Amaze file explorer' (attached - it was renamed to bypass the installation blocker) by pushing it through bluetooth.
You can find more details on this facebook post (not mine - but i used details from this thread to figure out how to disable the application from ADB)
Enjoy and drive safely.
Click to expand...
Click to collapse
Does this method work with Hyundai, Mitsubishi, etc...?
Hi Mr.
mrtoweldo you have any videos explain the steps in post #13 I will be thankful if you provide me with for urgent case.
thank you dear for great job