phone charges slowly but wont mount on computer xbox or ps3 what can i do??
Try a new cable
7jones4 said:
phone charges slowly but wont mount on computer xbox or ps3 what can i do??
Click to expand...
Click to collapse
Try enabling USB Debugging Mode.. SETTINGS>Applications>Development
i tried both new cables and usb debugging the computer makes the sound like it recognizes the device and it keeps saying MTP connnected but will not mount ive tried everything i can think of flashed new roms kernels
I have this problem too. AHven't found anyway to fix it yet.
Same issue
I have the same issue. I've tried 3 cables. Ive tried mounting in recovery, ive tried download mode. Nothing will connect my phone to a computer. I think it might be a hardware issue, and I can't unroot to take the phone back to sprint.
Related
Ok so I am trying to plug my phone into pc using usb cable so i can use odin. But my computer doesn't recognize my device. I've tried everything from uninstalling the drivers and reinstalling them restarted pc and phone. nothing works i did get it to read one time and was able to access my sd storage and then i tried to go into download mode and i plugged in usb cable and it didn't recognize so i got out of download mode and it didn't recognize the phone again. Then i plugged in my girls evo and it reads the phone all the time. Is there something wrong with my epic then? how can i fix that problem. seriously getting frustrated!!
Try not to double post. We will get to your issue eventually. Refer to the other case, as it has potential solutions available for your issue.
(I've dealt with this as well.)
Hi all...
For some reason, my device no longer shows on any of my computers, it only charges.
Drivers were installed and working the last time I connected it, but sometime between then and now it has stopped working. I've tried restoring a nandroid backup to a point I know it worked, tried manually enabling (it just says connect cable), tried to mount usb storage in recovery, tried multiple cables, etc... no go. Next I'll probably try flashing a custom rom, but I do not think that will work either.
Am I missing something? Any ideas? Or should I just return it as defective?
Thanks
Mael
Nobody? I'm surprised...
FYI, there was Kies update released recently that may update the drivers.
While connected to the computer using USB cable try manually configure your phone as the mass storage by going to System, Wireless and network, USB utilities.
did you enable mount USB?
have you tried on another computer? like on a Linux or Mac?
don't trust what windows tells you
Thanks for the replies. Tried all that...
Booted to recovery and mounted USB storage to, no go...
Tried on my laptop and my desktops at either of my offices.
Think I'm gonna return it as defective.
Sucks, cause now I have to set everything up again...
most likely the microUSB pins are out of place, loose or damaged
I bought a used stock EVO. When I plug the USB to my computer the charge light turns on but I don't get any sign that it recognizes the phone. So I can't mount for rooting. Is there a way to root from the sdcard? The phone sees the card fine. I have searched Google for a while and couldn't find anything.
caseyatbt said:
I bought a used stock EVO. When I plug the USB to my computer the charge light turns on but I don't get any sign that it recognizes the phone. So I can't mount for rooting. Is there a way to root from the sdcard? The phone sees the card fine. I have searched Google for a while and couldn't find anything.
Click to expand...
Click to collapse
have you tried a different cable? Also it is not possible to root from sdcard it requires usb connectivity from the phone to pc
Tried 2 different cables.
sounds to me like drivers are missing.
dbenney said:
sounds to me like drivers are missing.
Click to expand...
Click to collapse
The phone doesn't give any indication that something other than a charger is connected. No screen asking how I want to connect, and no USB icons on the task bar. So I think it is a device issue not a computer issue. I have tried 3 different cables and 2 different computers.
hey,
Try a different usb port as well as rebooting your computer, make sure you have the htc drivers needed for rooting downloaded maybe? If that doesnt work maybe factory reset the phone and try again! I wish you the best of luck!
Stevo
Hello all!
First: I promise I searched the forums and google as hard as I could!
I'm running AOKP JB with CWM, although the problem was present on stock ICS from T-Mobile.
Symptoms: Computer and phone will refuse to acknowledge any connection (nothing shows up in Device Manager), except the phone will still charge. If I do the "remove the battery with USB plugged in" trick, the first time I do it, it will recognize an unknown device, but kies and adb won't recognize it. If I unplug it and plug it back in, it'll go back to not acknowledging any connection.
I previously programmed it (when I was still running stock ROM) via ADB via WiFi, but I need to be able to use ADB via USB. Besides, I can't seem to get ADB over WiFi anymore.
When I plug it into a different computer (Win7), it will, however, recognize my phone.
Earlier this year, before I ever tried programming via WiFi, it connected to my Win8 machine with no problem. I don't think it's a problem with the wifi setup though because the ROM was reinstalled and of course I've restarted ADB in USB mode in the months since...
What I've tried:
Reinstalling Kies
Reinstalling Samsung USB drivers
[^]Restarting the ADB server
Updating ADB
Trying different USB cables
Trying different USB ports
Toggling USB debugging
Toggling MTP mode
The UART thing from the dialer
Restarting the phone and the computer (of course)
Checking to see if my computer's USB drivers need to be updated
The android terminal command "setprop persist.sys.usb.config mass_storage,adb"
Pulling and replacing the battery while connected via USB
Crying in a corner
If anyone can help me, it'd be greatly appreciated! I'm all out of ideas and Google is no longer helpful =/
try to uninstall the drivers that are present anything samsung related to your drivers ... then connect the phone and let the process do its thing if you have the samsung drivers saved on your PC and the drivers still aint working update the drivers and then manually click where the drivers are to install them and hopefully it will work and when you tried MTP is it the only option it gives you no storage or anything ??... and is usb debugging on when you are trying all this ??
krazierokz said:
try to uninstall the drivers that are present anything samsung related to your drivers ... then connect the phone and let the process do its thing if you have the samsung drivers saved on your PC and the drivers still aint working update the drivers and then manually click where the drivers are to install them and hopefully it will work and when you tried MTP is it the only option it gives you no storage or anything ??... and is usb debugging on when you are trying all this ??
Click to expand...
Click to collapse
I tried on my work computer that didn't have any samsung drivers and when the "unknown device" dialog popped up it didn't do anything or install anything, nor did it show up in Device Manager. Unplugging and replugging it back in did not reproduce the dialog box. Togged USB Debugging and still no dialog box saying it recognized it.
The thing with the samsung drivers is that they're self installing so even if it popped up in Device Manager, I wouldn't be able to manually update the drivers =/
I tried MTP both with and without USB Debugging, although it also gives the option for PTP.
At this point do you think I should unroot and go back to stock? It's not been recognized on three computers now! =[
Are you using the stock cable? My computer wouldn't recognize mine without it.
Sent from my SAMSUNG-SGH-T989 using Tapatalk 2
foltz61 said:
Are you using the stock cable? My computer wouldn't recognize mine without it.
Sent from my SAMSUNG-SGH-T989 using Tapatalk 2
Click to expand...
Click to collapse
Both the stock cable and a generic cable.
Similar problem
Similar problem as the OP. And hi guys, it's nice to be on these forums.
My device, when I plug it in using the stock cable, doesn't even charge. It doesn't show up in device manager, nor does it give me a notification, or say it's unsupported and bear that yellow icon. I have tried using different USB ports, I have tried the toggling USB debugging, I have tried restarting phone, computer, and taking out battery. I have tried that PDA/MODEM dialer trick. I am using 4.1.2 Jellybean, not rooted. (that WAS my goal,, until I hit this roadblock) I have not connected it to the computer in the past, it's relatively new. I'm thinking the cable is bust.
Any suggestions would be appreciated. It charges fine through a wall outlet plug, be it generic or stock.
so guys ive come to a conclusion i think its something in the samsung usb cables try getting yourself a blackberry usb cable , TRUST ME !!! ever since i got my phoness etc... tablet and yadi yadi samsung usb cables have always seemed to give me problems i think its because they are multi data/charging cables and when using the blackberry usb cable i have never ever once encountered a problem with any of my phones sd/storage problems do yourself a favor and pick up one of those cables and you will be golden !! if not then i guess im the only lucky one :LOL here you go http://www.amazon.com/Blackberry-Travel-Adapter-Micro-Cable/dp/B004VMVSYK/ref=pd_sim_cps_2 5 bucks!
Edit also one more test boot into recovery and click in the advanced menu and see if mount usb works for you in recovery mode ??
FIX (try using a generic cable)
I actually solved it on my own! After borrowing a generic cable from a friend it booted up! The Samsung cable was just not doing its thing.
yeah im telling you those cables they provide are JUNK!!! i only use my samsung to charge because they do that well but data they are str8 CRAP!! glad you got it up and going
OP
Hope OP will have the same luck as me...pray to the Android gods...
Lol:thumbup:
Sent from my SAMSUNG-SGH-T989 using xda app-developers app
I have had issues connecting the Note 4 to my PCs. I have tried multiple cables and computers. A usb error appears "Usb Device not recognized" "The last USB device you connected to this computer malfunctioned and WIndows does not recognize it." All PC's are running windows 8. I have tried connecting it via fastboot to flash to stock as well as through ADB and I cannot get anything to read the device.
Are you using the oem cable? Sometimes cheap generic cables give errors. Enable usb debugging and see if that helps. Good luck.
dteze88 said:
Are you using the oem cable? Sometimes cheap generic cables give errors. Enable usb debugging and see if that helps. Good luck.
Click to expand...
Click to collapse
Thanks but I've tried multiple. OEM and aftermakert cables. I found that when I put it in the charger it doesn't detect it as AC. I believe for some reason when the phone is connected to the PC it doesn't switch to MTP, which could cause the issue. I have wiped the phone, tried different roms, and installing plasma kernel. I am at my wits end. I have tried finding sprint's seceret number to dial, supposedly there's a menu to force MTP but I can't find it anywhere.
OK. So I couldn't connect via cable I tried flashing the stock image though mobile odin and now I lost recovery and the phone bootloops. Does anyone know a way to boot into recovery from the external SD card?
I would just flash the OF5 tar and start from scratch. http://forum.xda-developers.com/not...om-sm-n910p-stock-of5-odin-flashable-t3158114
Sounds like it's your computer.
Edit: Any other phone's Samsung or not able to connect? Does your phone charge with any or all of your cables? Hopefully the stock cable.
You need to go to Device Manager and Uninstall/reinstall the drivers pertaining to USB
Uninstall the samsung drivers
After that, unplug your powercord from the laptop
connect the phone to your usb port first and then replug your powercord and turn on your laptop
let the usb and samsung drivers reinstall(auto or manual)(if it detects it normally))
dteze88 said:
I would just flash the OF5 tar and start from scratch. http://forum.xda-developers.com/not...om-sm-n910p-stock-of5-odin-flashable-t3158114
Click to expand...
Click to collapse
I wish I could, the issue is that since I get this USB error, I can't get ODIN to detect my phone.
w7excursion said:
Sounds like it's your computer.
Edit: Any other phone's Samsung or not able to connect? Does your phone charge with any or all of your cables? Hopefully the stock cable.
Click to expand...
Click to collapse
I was able to get my Note 3 to connect with no problem, I was even able to get ODIN to detect it in Fastboot. I have one more cable I am going to try tonight, I have my girlfriend bringing it with her. I may have switched an S4 cable with the Note 4 cable. I hope this is the case.
xxSTARBUCKSxx said:
You need to go to Device Manager and Uninstall/reinstall the drivers pertaining to USB
Uninstall the samsung drivers
After that, unplug your powercord from the laptop
connect the phone to your usb port first and then replug your powercord and turn on your laptop
let the usb and samsung drivers reinstall(auto or manual)(if it detects it normally))
Click to expand...
Click to collapse
I was using my desktop, and I tried this on my laptop. Didn't work. Thanks though! I am wondering if this possibly could be a Windows 8.1 issue...
Anyways, 5.50 to anyone who gets this working.
I accidentally switched cables with my son's s4 and nothing would work. Figured it out and then I could connect to my computer. Could be the same thing lol.
w7excursion said:
I accidentally switched cables with my son's s4 and nothing would work. Figured it out and then I could connect to my computer. Could be the same thing lol.
Click to expand...
Click to collapse
I wish that was the case. I am wondering if it's a windows 8 issue now.
I'm on 8.1 pro, and my devices detects fine under cm12.1.
Have you tried going into Settings > Storage. select the 3 dot menu on the top right and force MTP or PTP detection while device is connected to PC / Laptop?