Hi all!
Today afternoon, i wanted to start tcpmp, and it said, that "player.exe bla bla can not be found..." okay, i removed and plugged in the card again - same issue.Soft reset - didn't help.I even can't see the card in total commander on my uni. I attached the card to my pc, and it says (i am using a hungarian OS, i'll try to translate the error message) : Card can not be read because of an I/O error. I can't even format it... However, i saw that the "encryption" box in the settings (on the uni) is checked, and i can't uncheck it! This might be the problem? Please help!
(I am using THING v4.1-WM6.1 and a 2GB Panasonic SD card-!NOT SDHC!)
Thanks!
I've got a similar problem. Today my XDA won't read my SD Card. But my PC can read it no problem, suggesting the problem is not with the card itself.
I've got tha problem!
Hi!
I think i know the problem... In storage settings i had to set it to SD only mode (i don't know yet that my SD is working, i'm not at home) but my 256MB nokia rs mmc did the same, then i set it to sd only mode, and now it works! I hope my SD will work too, i don't want to throw it to the trash
Hello dear people, I'm in a trouble and need your help!
I've installed Oxygen 0.2.2 (before I've upgraded to 32.44.00.32U_5.09.05.30_2 radio, a recommended one).
After reboot my sim is not recognized anymore.
System dosen't read SD card.
But I can still use phone with wifi and this sort of things.
./adb-mac kill-server
./adb-mac start-server
./adb-mac devices dosen't shows me my device number.
I can't get into recovery mode anymore....
Please give me some suggestion?
P.S I've already done hard reset. But no luck.
sim card and sd card not recognised by htc desire miui rom
Hi all
Aplha Rev S-off, Amon Ra recovery Htc Desire 2.2
I just installed miui rom update over miui.19 r1 and my phone stopped working and it is showing sim card error, I tried 3-4 different sims and non of them are working. another problem is it stopped recognising the sd card same i tried 2 others but no luck
please can you help me as i have back up the sd card so can not restore as well as its not recognising my card.
any tips or tricks please, as i can not go to htc customcare as i have already voided my warrenty.
i tried using different sd card when i tried to do nand backup on new card just to check if its appear on system then it showed to start backing up then
Error: Run @[email protected] via adb
and if i tried to upload backup file flash zip from sd card in recovery then it is saying E: can’t mount /sdcard
I have backups of past around 3 different backups , but they are on my cards and my phone is unable to detect sd card so can not go further.
Is there any other way to do restore on phone using backup files, if its not detecting sd card
2) I checked my sim problem as well, sometimes it shows me the arial symbol for network , but when i try to call it shows me the error ” Mobile network not available”
really annoyed as this is my primary phone.
if you/anyone else got an idea, most welcome
Is there any way I can install the latest update without sd card????
please help me and do reply, i know its not nice to see problems n no one is happy to sortout, but i will really appreciate it.
thanks
Raj
Same problem no solution yet?
Hello.
If you need to mound SD Card try this: http://forum.xda-developers.com/showthread.php?t=531310 , maybe it can help you.
If you succeed in mounting the SD card the you should run the PB99IMG from hboot, and this will bring you back to stock with no ROOT and no S-OFF.
How to extract the PB99IMG from the lastest RUU WWE 2.29.405.5 here: http://forum.xda-developers.com/showthread.php?t=880268 (2nd post).
@alinuxos I think that running a RUU might solve your problem by getting you back to stock.
Was there a fix for this?
Tutorial Repair MicoSD Card After Mango Lock! in Windows Apperently HD2 only! s!
okay This tutorial will not work on the real protected WP7 sdcard, only for hacked HD2
only problum is I have'nt tested it so I will need a test rabbit to stab with a needle! if he is sic then he wont have any problum doing so! please volentear!
okay so this is how its done!
first fallow this tutorial for MicroSdCard repair!
Step #1. do a google search for "hp drive key boot utility" Download it to your computer! (the name of the exe after extracted is "hpdkbu.exe"(I have windows 7 & the utility would not install on my system if this is the case for you as well just click extract instead of install & run the hpdkbu.exe. that I just mentioned) hopefully you have a usb adapter...or card reader pluged in. Run the utility select the drive letter for your MicroSD card that is in the usb or card reader mine was "e"...
click next... then select create new or replace (its already checked) hit next... select hard drive (its already checked) hit next... select create new file system (its already checked) hit next... then it says something at the bottom then says formatting...
here is the weird part of the tutorial the program stops responding... right about when it gets to the part that says something about lunixsys file because the exe wont be useing that part of the program. Dont sweat it just end task it... now go to my computer & look at your properties for the drive (should say 0 free 0 used)... now right click on the drive and select format... now you can see your card in windows but the partiton will be unreconised as well as the size!
Step #2. Okay now that the mbr has ben repaired & windows sees the card we move on to kill disk! do a google search for this program kill disk!
use it on your micro sd card!
Step #3.after that you may need to reformat it
note thare are to diffrent versions of killdisk #1 works in windows the other is a lunix distro that is a bootable disk if you use the lunix disto you can skip step 1
& one more note apperently the program killdisk takes a realy long time to run xda user Perlian reported that he had ran the program for over 5hr's but in the end his MicroSD card was repaired!
(origanal quote)
Perlian said:
Yesterday I used the tool Killdisk (Free Edition) to try and revive my locked Transcent 16 GB Micro SD Card. I normally use this tool to revive my SSD's when installing a fresh version of Windows. The tool does not look at partitions but simply writes zero's ("00000") to the medium.
I used the Linux version located on the ultimate boot CD (http://www.ultimatebootcd.com/). So I booted my laptop with the ultimate boot CD in it (USB reader + mico SD card plugged in). Ran the Killdisk tool for over 5 hours (!!).
After that I booted my Windows and I was able to format the micro SD card !
So no Nokia phone was needed .....
Hope it works for everybody with a locked card.
Click to expand...
Click to collapse
Now someone test my lil tut & post your results!
if this post helped please say thanks to keep the thread alive
fingers crossed!
Quicker way is to put the microsd card into a nokia and hit format
Works just the same.
This "tutorial" will not work on the real protected WP7 sdcard, only for hacked HD2 (where is sdcard is not protected by hardware key). That issue was discussed million times on xda...
So, jackrabbit72380, before posting useless advises, try togoogle first.
sensboston said:
This "tutorial" will not work on the real protected WP7 sdcard, only for hacked HD2 (where is sdcard is not protected by hardware key). That issue was discussed million times on xda...
So, jackrabbit72380, before posting useless advises, try togoogle first.
Click to expand...
Click to collapse
alright i didnt know that because im actuly useing an hd2 so i will add that to the first post
jackrabbit72380 said:
alright i didnt know that
Click to expand...
Click to collapse
It means we need a good wiki page for all wp7 tricky issues... Too many forums, topics and posts - people who just started and not followed wp7 scene from the beginning, might have problem in finding info.
sensboston said:
It means we need a good wiki page for all wp7 tricky issues... Too many forums, topics and posts - people who just started and not followed wp7 scene from the beginning, might have problem in finding info.
Click to expand...
Click to collapse
very true & great sugjestion altho your posting it in the wrong place you shoud make a thread about it or something? a wiki would be very usefull & helpfull!
and yeah i have had to search all over the place!
it's ben crazy!
is not working, the hp utility wont recognice a drive, so thats for that, what should i do if i dont even recognize the card? you know that sound when windows 7 finds a device, plugged in. that sound appears to times right after i put the memory card into the slot, it ejects immediatly, and i cant get my cards to work...
weeezel said:
is not working, the hp utility wont recognice a drive, so thats for that, what should i do if i dont even recognize the card? you know that sound when windows 7 finds a device, plugged in. that sound appears to times right after i put the memory card into the slot, it ejects immediatly, and i cant get my cards to work...
Click to expand...
Click to collapse
well the hp utility worked on my card are you sure you selected the right drive letter?
after the program stoped on lunix sys i terminated it with task manager it had alredy sead fomating was done.
i had to pull the card out and put it back in!
try that?
then windows could see the still locked card!
the field where ti said you should select the drive letter is empty, and i cant write into it...
n/a
Got 2 locked goddamned sd-cards (on HD2), trying to recover them about 2 weeks, spend more than 100 hours no any result using ANY WAY!!!!!!
HP utility does not format my card, it says formatting, then linux sys, but the program is responding after that! The card is NOT VISIBLE, even if you end task the HP window. If hit OK, than program says that format is sucessful.
I did not find ANY LINUX DISTRIBS with KILLDISK, only DOS, which is FREEZING on detecting usb devices. Tried also to use Ultimate BootCD to fix cards. It is also not booting with USB Card Reader [tried ALL MODES WITH ALL AVALIABLE USB OPTIONS!!!] it boots only in NO UMB [def mode without USB 2.0 (only 1.1)], but discovers only SD-adapter with working SD-Card. When I put the locked instead of broken and try to switch working microsd on locked and start formatting, it says "WRITE ERROR"
So none of posted instructions for recovery did not worked for me (even NOKIA phones did not see the card). Maybe error with usb chipset or card reader, but these methods are not working.
Got Win7/ASUS K70AF with integrated Card-Reader (Alcor Micro USB 2.0 Card Reader) and locked MicroSD Cards Transcand 1GB&8GB plus NOT_LOCKED SANDISK 1GB.
Could you provide more info about exact version of HP Tool? I got 7.41.3790.0 from the first link of Google. Or at least post, where did you find Linux version of KILLDISK, or you mean DOS version? What card reader do you have?
Thanks a lot for your help!
Any Luck with this? HELP NEEDED
I just upgraded the SD Card in my Venue Pro to 32GB, and was wondering if I Could format my 16GB Sandisk that was in it before Mango upgrade.
I followed each step but was unable to proceed. Please any help would be appreciated. Or please point me to a Thread I can follow.
Thanks
Awesome! Worked perfectly and only took ~20 minutes. Thanks
this method works great in the HD7, revived 3 cards last night...
Not sure if it can be ported to the HD2 or others, but worth a look...
http://forum.xda-developers.com/showthread.php?t=1337781
jackrabbit72380 said:
Tutorial Repair MicoSD Card After Mango Lock! in Windows Apperently HD2 only! s!
okay This tutorial will not work on the real protected WP7 sdcard, only for hacked HD2
only problum is I have'nt tested it so I will need a test rabbit to stab with a needle! if he is sic then he wont have any problum doing so! please volentear!
okay so this is how its done!
first fallow this tutorial for MicroSdCard repair!
Step #1. do a google search for "hp drive key boot utility" Download it to your computer! (the name of the exe after extracted is "hpdkbu.exe"(I have windows 7 & the utility would not install on my system if this is the case for you as well just click extract instead of install & run the hpdkbu.exe. that I just mentioned) hopefully you have a usb adapter...or card reader pluged in. Run the utility select the drive letter for your MicroSD card that is in the usb or card reader mine was "e"...
click next... then select create new or replace (its already checked) hit next... select hard drive (its already checked) hit next... select create new file system (its already checked) hit next... then it says something at the bottom then says formatting...
here is the weird part of the tutorial the program stops responding... right about when it gets to the part that says something about lunixsys file because the exe wont be useing that part of the program. Dont sweat it just end task it... now go to my computer & look at your properties for the drive (should say 0 free 0 used)... now right click on the drive and select format... now you can see your card in windows but the partiton will be unreconised as well as the size!
Step #2. Okay now that the mbr has ben repaired & windows sees the card we move on to kill disk! do a google search for this program kill disk!
use it on your micro sd card!
Step #3.after that you may need to reformat it
note thare are to diffrent versions of killdisk #1 works in windows the other is a lunix distro that is a bootable disk if you use the lunix disto you can skip step 1
& one more note apperently the program killdisk takes a realy long time to run xda user Perlian reported that he had ran the program for over 5hr's but in the end his MicroSD card was repaired!
(origanal quote)
Now someone test my lil tut & post your results!
if this post helped please say thanks to keep the thread alive
fingers crossed!
Click to expand...
Click to collapse
I just used diskpart to delete the partition on the sd card that was locked, formatted the 16giger and it's usable again.
someeh said:
I just used diskpart to delete the partition on the sd card that was locked, formatted the 16giger and it's usable again.
Click to expand...
Click to collapse
just a quick one: is your sdhc card seen, in any way, by the utility you use to format it?
for instance, a transcend class 2 sdhc 16 gb card is only see by the hp utility but when I hit the format button says there is no card to format (using sd formatter it only sees the card for 2 seconds) - OS Windows 7 / Windows XP (all drivers installed)
madalinpascu said:
just a quick one: is your sdhc card seen, in any way, by the utility you use to format it?
for instance, a transcend class 2 sdhc 16 gb card is only see by the hp utility but when I hit the format button says there is no card to format (using sd formatter it only sees the card for 2 seconds) - OS Windows 7 / Windows XP (all drivers installed)
Click to expand...
Click to collapse
Diskpart is a utility included in Windows, so when you go to a command prompt.
type diskpart
It will load and bring you in.
type list disk> this will list all the drives (HDD, SD CARDS, REmovable disk,etc) it will list the disk by numbers. So when you see your SD CARD and it's # 2 or #3 on the list you type this
select disk #2... now disk #2 is active and you can start deleting partitions within that card.
But you need to list the partitions in order to format the entire card, you will need to execute this command in order to delete the locked partition. But before I will give you the list of commands you need. Once you " select disk #" do this,
list partition> will list all the partitions on the selected disk, you need to select each partition and delete manuallly.
select partition 1
delete partition override> for the partition that is locked
select partition 2
delete partition
Once the partitions are deleted you'll be able to format the card normally.But I doubt you'll need to use HP that utility.
jackrabbit72380 said:
Tutorial Repair MicoSD Card After Mango Lock! in Windows Apperently HD2 only! s!
okay This tutorial will not work on the real protected WP7 sdcard, only for hacked HD2
only problum is I have'nt tested it so I will need a test rabbit to stab with a needle! if he is sic then he wont have any problum doing so! please volentear!
okay so this is how its done!
first fallow this tutorial for MicroSdCard repair!
Step #1. do a google search for "hp drive key boot utility" Download it to your computer! (the name of the exe after extracted is "hpdkbu.exe"(I have windows 7 & the utility would not install on my system if this is the case for you as well just click extract instead of install & run the hpdkbu.exe. that I just mentioned) hopefully you have a usb adapter...or card reader pluged in. Run the utility select the drive letter for your MicroSD card that is in the usb or card reader mine was "e"...
click next... then select create new or replace (its already checked) hit next... select hard drive (its already checked) hit next... select create new file system (its already checked) hit next... then it says something at the bottom then says formatting...
here is the weird part of the tutorial the program stops responding... right about when it gets to the part that says something about lunixsys file because the exe wont be useing that part of the program. Dont sweat it just end task it... now go to my computer & look at your properties for the drive (should say 0 free 0 used)... now right click on the drive and select format... now you can see your card in windows but the partiton will be unreconised as well as the size!
Step #2. Okay now that the mbr has ben repaired & windows sees the card we move on to kill disk! do a google search for this program kill disk!
use it on your micro sd card!
Step #3.after that you may need to reformat it
note thare are to diffrent versions of killdisk #1 works in windows the other is a lunix distro that is a bootable disk if you use the lunix disto you can skip step 1
& one more note apperently the program killdisk takes a realy long time to run xda user Perlian reported that he had ran the program for over 5hr's but in the end his MicroSD card was repaired!
(origanal quote)
Now someone test my lil tut & post your results!
if this post helped please say thanks to keep the thread alive
fingers crossed!
Click to expand...
Click to collapse
Hello.
I am following your guide to unlock my microsd blocked by HTC HD7.
I arrived well at the end of step 1, but already I'm stuck at step 2.
I installed the program on my Windows 7 KillDisk, but the card still does not messing around, and Windows, as you say, it tells me 0 and 0 free memory in use and the formatting is not available.
What version of KillDisk should I use? You may link to the page where you download it?
5ft24 said:
this method works great in the HD7, revived 3 cards last night...
Not sure if it can be ported to the HD2 or others, but worth a look...
http://forum.xda-developers.com/showthread.php?t=1337781
Click to expand...
Click to collapse
Tried it and it worked. Everyone who was troubles getting the MicroSDHC to work for other devices should take a look at this. The rom used is the one by xbmod, so this trick can be used on all HTC 1st gen devices.
Spread it!
Thanks for your tutorial. But did I get you right that it only works when the sd-card is detected before? The problem is that my sd-card is not shown anywhere at all. So I think I cannot work on it by using any normal windows based program... I tried several tools (also the HP key disk tool or however it is called) and it did not find anything to format.
P-A-L-A-D-I-N said:
Thanks for your tutorial. But did I get you right that it only works when the sd-card is detected before? The problem is that my sd-card is not shown anywhere at all. So I think I cannot work on it by using any normal windows based program... I tried several tools (also the HP key disk tool or however it is called) and it did not find anything to format.
Click to expand...
Click to collapse
I have the same problem and i did try Lunix based GParted without any luck at all. Now i don't dare to try the pull sd card method to change rom
Hi everyone, yesterday I faced a strange problem and can't find the solution yet:
My SD Card seems to work just fine, I can see all the files with File explorer, open them, etc, but when I connect it to my MacBookPro it doesn't mount so I can copy-paste files on it. I get an error message: "The disk you inserted was not readable by this computer".
Strangest thing is I can see the files of the SD through Sony Bridge for Mac...
Any ideas on how I can mount it again?
Thank you for your time
AW: [Q] No access/mount of SD card in PC/Mac?
Tried that official android file transfer tool?