Develop Bugs

(ask) costum rom huawei u8100

too many costum rom, but i dont have costum rom for my huawei u8100.. Anyone have any suggestions?
Sent from my U8100 using Tapatalk

Hope this will help you...........
Instructions
1. Flash a recovery image (tested with AmonRA.)
2. Copy the .zip file to your MicroSD card and boot the phone into recovery mode (call+volume-up+power)
3. Choose "Flash zip from sdcard" and choose the zip you just copied. A guide in pictures
4. (optional) Wipe data+cache before rebooting. It may or may not work OK to not wipe data but it's propably best to wipe.A guide in pictures
5. If you skip step 4 because you are upgrading you MUST still clear the dalvik-cache because of JIT being enabled in RLS6.

[Q] New in custom rom

Hi.. I'm new here and I think this is the place to ask this.. I want to use ARHD but i have a stock rom.. I already upgrade into GB. is it possible to convert it into ARHD? using the method.....
-Download ROM and place it on your SD card
-Download "Super Wipe" script & place it on your SD card (optionally if coming from earlier version of my ROM, obligatory if coming from stock or other custom ROM)
-Boot your phone in recovery mode (vol down + power)
-In main menu, select "install zip from sdcard"
-Select "choose zip from sdcard" and browse to the location of "Super Wipe" script
-Once again select "choose zip from sdcard" and browse to the location of Android Revolution ROM
-After flashing process is complete, reboot the device
Or is there other method to do first before doing this... Thanks..
Best regards,

-DemiGodz- said:
Hi.. I'm new here and I think this is the place to ask this.. I want to use ARHD but i have a stock rom.. I already upgrade into GB. is it possible to convert it into ARHD? using the method.....
-Download ROM and place it on your SD card
-Download "Super Wipe" script & place it on your SD card (optionally if coming from earlier version of my ROM, obligatory if coming from stock or other custom ROM)
-Boot your phone in recovery mode (vol down + power)
-In main menu, select "install zip from sdcard"
-Select "choose zip from sdcard" and browse to the location of "Super Wipe" script
-Once again select "choose zip from sdcard" and browse to the location of Android Revolution ROM
-After flashing process is complete, reboot the device
Or is there other method to do first before doing this... Thanks..
Best regards,
Click to expand...
Click to collapse
Do you rooted ur device?

-DemiGodz- said:
Hi.. I'm new here and I think this is the place to ask this.. I want to use ARHD but i have a stock rom.. I already upgrade into GB. is it possible to convert it into ARHD? using the method.....
-Download ROM and place it on your SD card
-Download "Super Wipe" script & place it on your SD card (optionally if coming from earlier version of my ROM, obligatory if coming from stock or other custom ROM)
-Boot your phone in recovery mode (vol down + power)
-In main menu, select "install zip from sdcard"
-Select "choose zip from sdcard" and browse to the location of "Super Wipe" script
-Once again select "choose zip from sdcard" and browse to the location of Android Revolution ROM
-After flashing process is complete, reboot the device
Or is there other method to do first before doing this... Thanks..
Best regards,
Click to expand...
Click to collapse
must root ur device......eng s off ,radio s-off..........
must flash new cmw recovery...........and a new radio given in mikes post.....

I can't root my phone... is there other way to root it? I tried it but my phone got hang... can someone assist me step by step... I want to try ARHD but i don't know where to start...

ok listen i will help....but i cant give all instructions to root ur fone and guarantee on ur fone..........u should done it at ur own risk..............
i hope u r having ginger bread.....
pls follow this guide......
http://forum.xda-developers.com/showthread.php?t=1152233
and post where you struck..................
not only me ......there will be many to help you in this...............
all the best ~~~~~~

Thanks for the help.. after that can I now go to mike's procedure without using rom manager? Can I only be root i dnt want to backup any apps or any files that I have... I want to erase all the data.. or still I need to install titanium backup..
Thanks so much
Regards,

-DemiGodz- said:
Thanks for the help.. after that can I now go to mike's procedure without using rom manager? Can I only be root i dnt want to backup any apps or any files that I have... I want to erase all the data.. or still I need to install titanium backup..
Thanks so much
Regards,
Click to expand...
Click to collapse
no if you dont wanna use titanium back up....skip that step......
but remember after permenant rooting you should Radio S-Off and ENG soff
both are given in above guide and use must flash ClockworkMod recovery of rom manager b4 using any custom roms.........
after that u can go 4 mikes steps...........

I just want to ask what if all of a sudden it failed.. What will happen on my phone? Can I factory reset on its original ROM what I'm going to do just incase...
Thanks for the help.. I will try this..
Regards

-DemiGodz- said:
I just want to ask what if all of a sudden it failed.. What will happen on my phone? Can I factory reset on its original ROM what I'm going to do just incase...
Thanks for the help.. I will try this..
Regards
Click to expand...
Click to collapse
it will depend on the step u failed....if failed in dangerous cases like flashing radio fone bricked...........
do each step carefully....reading everything.............
once u root it .....it voids warrenty and a factory reset wont unroot it....
you hav to follow another steps for that ~~~~~~~~~

[Q] update nightly version, steps are correct?

i would like update the latest version of nightly, and i do not wanna reinstall the apps, so i prepare to flash as follows, but i can not sure it is safe or not,
1.down the latest version and copy it to the SD card
2.reboot, when the led turns blue, press V-,go to Bootmenu
3.select "install zip from sdcard", "choose zip from sdcard", then select the latest version.
some guys said "wipe cache" & "wipe dalvik cache", is that necessary? if i do not, the phone will not work or sth? anyone who can tell me? thx...
ps: i just do not wanna install all apps again and keep my google account as well as the sms and call log. what should i do？
thank you in advance.

do a wipe cache and wipe dalvik cache before and after you install the update . thats about it

As flunk03 said, wipe cache and dalvik before and after flashing the nightly. You will still have the apps installed from the previous version.

Why wipe cache and Dalvik cache before and after instalation?

florin24 said:
As flunk03 said, wipe cache and dalvik before and after flashing the nightly. You will still have the apps installed from the previous version.
Click to expand...
Click to collapse
thank you all
but last time, after wipe, all sms and call logs gone, and some apps also disappeared, several apps were installed in the SD card, so i have to remove them to the phone memory?

you must have selected wipe data/factory reset . so i ll just rewrite my earlier post
1.Use titanium backup to backup ur apps
2. Boot into recovery and make a backup of your existing rom
3. Wipe cache and dalvik cache before and after you flash the update
4. calibrate your battery after you install the update only if the update is stable

[Q] question jellysandwich 7.2

Hey everybody i have a xperia pro mk16-a- with bootlader blocked and rooted.....i tried to install this room (Jellysandwich) and when i did that, my cell died
i followed the instructions on the post to install it but it didn't works
i also try to install by the second metod that says that restore the original firmware excluding kernel, i rooted the phone again and try this second way and again it died
what can i do to install this room??, i have few options by the bootloader blocked.......
somebody has installed this rom on mk16-a-??
doest it works on mk16-i-??
.......................one suposition....i thing it can works on mk16i but relly i don't know...... any suggestions?:fingers-crossed:
answers are welcome!!:silly:

kikisx10 said:
Hey everybody i have a xperia pro mk16-a- with bootlader blocked and rooted.....i tried to install this room (Jellysandwich) and when i did that, my cell died
i followed the instructions on the post to install it but it didn't works
i also try to install by the second metod that says that restore the original firmware excluding kernel, i rooted the phone again and try this second way and again it died
what can i do to install this room??, i have few options by the bootloader blocked.......
somebody has installed this rom on mk16-a-??
doest it works on mk16-i-??
.......................one suposition....i thing it can works on mk16i but relly i don't know...... any suggestions?:fingers-crossed:
answers are welcome!!:silly:
Click to expand...
Click to collapse
make sure in cwm before installation
1. Wipe data/factory reset
2. wipe cache partition
3. go to mounts and storage menu and\
4. format /system
5. format/data
6. format cache
7. exit mounts and storage menu
6. go to advance
7. wipe dalvik cache
8. wipe battery stats
9. exit advance
10. install Jelly sandwich from sd card without rebooting
see if this works.

jman2131 said:
make sure in cwm before installation
1. Wipe data/factory reset
2. wipe cache partition
3. go to mounts and storage menu and\
4. format /system
5. format/data
6. format cache
7. exit mounts and storage menu
6. go to advance
7. wipe dalvik cache
8. wipe battery stats
9. exit advance
10. install Jelly sandwich from sd card without rebooting
see if this works.
Click to expand...
Click to collapse
hey with the new 7.2.1 it works!! thanks!!

kikisx10 said:
hey with the new 7.2.1 it works!! thanks!!
Click to expand...
Click to collapse
you're welcome

[Q] ViperX venom tweaks won´t stick - flash problems

When installing the new uppdate ViperX 3.3.0 - can I do a full wipe and install that or do I need the former versions first (3.2-3.2.4)?
I´ve had problems flashing numerous times but finally got it on the phone and then made the 2 other uppdates ota to 3.3.2 but when I´m in the venom tweaks and change the max cpu to 1300 and changes back to 1500 after a while and sometimes after reboots.
I checked the ticker "aply settings on boot". Sometimes the min cpu freq also changes by itselfes to 1300....
The "mount system r/w" ticker also never stays checked....
I´ve had problems flashing, it only worked when I didn´t do a full whipe on the 3.3.0 version.
Sometimes the flash crashed after 10-15% and sometimes when the flash was ok and finished I ended up on the white htc logo.
I did this:
1: Move the zip file to htc in my download folder.
2. using winrar, get the boot.img file - moved that to my Boot_Flash_Script folder.
3. Go to Bootloader
4. Connect htc one x to the pc - fastboot usb
5. In the Boot_Flash_Script folder - dubbelclick on the flash-boot-windows file.
The boot.img flashes ok and also the cache is cleared.
6. unplugg the htc and go into recovery.
7. Using Aroma Installer I wipe cache, wipe dalwik cache and (maybe this is wrong) wipe System.
8. Then I click Install - find the zip file and excecute that.
9. Choose the stock kernel.
10. Full wipe.
11. flashes.
Then it sometimes crashed at 10-15% or flashes ok and when i hit "Reboot" it hangs itself on the white htc logo.....
This also happened when I tried to flash Icecoldjelly…
What am I doing wrong?
Noooob-thanks,

Nothing really, but download the latest full rom and check the MD5 number, flash the boot.img again and do a full wipe in recovery....
Wipe cache partition
Wipe data/factory reset
Advanced - wipe dalvik cache
Mounts & storage - format cache, data, system
Just to be sure and then install the Rom.zip. choose in the aroma for a full wipe again and continue....the question about the kernel you answered correct with NO.
the mhz option probably doesn't stick because there is only a stock kernel available, we don't have custom kernels yet ....

When wipeing and factory reset, does it erase anything on my sd-card?
It shouldn, right, since its on sdcard0...?
Even with a factory reset it shouldn't erase nothing?

Nope

Great.
Thanks!

So after flashing the boot.img, go into recovery and basicly wipe everything except external storage?!
Under "Mount" there are 4 tickers : Mount System, Mount Data, Unmount Cache, Unmount SD Card.
Unmount Cache & Unmount SD Card are checked....
What to do there?
And then just flash the Rom, Full wipe in Aroma, chose stock kernel and that should do it?!

I will quote myself ! Do NOT touch the mount stuff only touch the FORMAT stuff
And ofcourse you do NOT format sdcard !!!
Mr Hofs said:
Nothing really, but download the latest full rom and check the MD5 number, flash the boot.img again and do a full wipe in recovery....
Wipe cache partition
Wipe data/factory reset
Advanced - wipe dalvik cache
Mounts & storage - format cache, data, system
Just to be sure and then install the Rom.zip. choose in the aroma for a full wipe again and continue....the question about the kernel you answered correct with NO.
the mhz option probably doesn't stick because there is only a stock kernel available, we don't have custom kernels yet ....
Click to expand...
Click to collapse

Flashed the boot.img.
Wiped everything and did a factory reset then flashed the Rom and it worked.
Think the factory reset did the trick - the only thing I didn´t do before.
Thanks!!!!!!!!

Finally !!!